Lithium
The Saft LSH 20 is a high-performance 3.6-volt lithium primary battery in size D (mono), which was developed for professional and industrial applications with high energy and power requirements. Based on lithium thionyl chloride technology (Li-SOCl2), it is specially optimised for applications that require both a long service life and the ability to deliver high current pulses. This variant is pre-configured with axial wire leads for direct and secure PCB mounting.Highlights at a glanceHigh current load capability: Developed for applications with high continuous and peak current requirements (high drain).Maximum capacity and energy density: With 13 Ah, an extremely energy-rich battery for long, self-sufficient operating times.Extreme longevity: Low self-discharge provides a shelf and service life of over 10 years.Extremely wide temperature range: Reliable performance under the most extreme conditions from -60 °C to +85 °C.Industrial configuration: Equipped with robust, axial wire leads for easy and secure PCB mounting.Reliable energy for critical high-current applicationsThe Saft LSH 20 is the preferred energy source for demanding applications where a long service life and high pulse currents are required. Its main field of application is powering radio modules (e.g., in remote meter reading), GPS tracking systems (asset tracking), oceanography, military uses, and security technology. It is the ideal solution when devices remain dormant for years but must deliver high power immediately when required.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl2) of the LSH series is designed for high performance. It offers the highest energy density of all primary lithium chemistries and a very stable voltage during discharge, even at high loads. The cells are hermetically sealed and distinguished by maximum safety and reliability, making them the first choice for critical and hard-to-reach applications.Developed for industrial integrationAs an industrially pre-configured cell, the LSH 20 with axial wire leads is optimised for efficient and process-secure manual or automated PCB assembly. The robust connecting wires ensure a permanently secure and vibration-resistant solder connection. With this cell, Saft offers developers and manufacturers a reliable and extremely powerful platform for designing durable and low-maintenance products. Characteristics ModelSaft lithium battery LSH 20 with axial leads TechnologyLithium thionyl chloride (Li-SOCl2) Rated voltage (V)3.6 Capacity (mAh)13000 Dimensions (Ø x H in mm)33.4 x 61.6 ConnectionAxial leads Weight (g)approx. 100 FAQs about the Saft LSH 20 lithium batteryWhat is the difference between the LSH and LS series from Saft?Both series are based on Li-SOCl2 technology. The LSH series (high drain, e.g., LSH 20) is optimised for applications with high current requirements (high pulse and continuous currents). The LS series (low drain, e.g., LS 33600) is designed for applications with very low continuous current over an extremely long period (up to 20 years), such as pure backup buffering.What does "axial leads" mean?Axial leads are connecting wires that are routed centrally from the two flat ends (terminals) of the cylindrical cell, i.e., along the longitudinal axis of the battery. This configuration is ideal for horizontal mounting and threading the wires through holes in a printed circuit board (through-hole technology, THT).Is this battery rechargeable?No, under no circumstances. This is a lithium primary battery. It must not be attempted to recharge it under any circumstances. Attempts to charge are extremely dangerous and can lead to fire or explosion of the cell.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please hand in the empty battery to the designated industrial or municipal take-back points to ensure proper and environmentally sound recycling.
The Tadiran TL-5930 is a primary high-performance lithium-thionyl chloride battery in the large size D (Mono). It is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version (/F) comes with flexible cable ends (Flying Leads) pre-assembled for versatile and straightforward installation. With a nominal voltage of 3.6 V and a very high capacity of 19 Ah, it is the ideal energy solution for demanding and long-lasting industrial applications.Highlights at a glanceVery high capacity: 19 Ah for extremely long, self-sufficient operating times over many years.Maximum longevity: Extremely low self-discharge of under 1% per year.Flexible termination: Pre-assembled with free cable ends (/F) for versatile installations.High nominal voltage: Stable voltage of 3.6 V during almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful for many applicationsThe Tadiran TL-5930 was specifically developed for long-term applications with low to moderate continuous current, where maximum energy reserve is required. The flexible cable connections also allow installation away from the main board. Its main areas of use include self-sufficient measuring buoys, long-term data loggers, professional security technology, remote monitoring systems and industrial control units (SPS) that must operate for years without maintenance.Engineered for maximum safety and efficiencyThe safety and longevity of the TL-5930 are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium-thionyl chloride technologyLithium-thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low power consumption. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to a minimum and thus enables extremely long storage and operational life. This ensures that energy is still reliably available even after many years. Features ModelTadiran TL-5930 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeD (Mono) Nominal voltage (V)3.6 Capacity (mAh)19000 Max. continuous discharge current230 mA Max. pulse current400 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 60.0 Weight (g)approx. 92 ConnectionCable connection RechargeableNo FAQs about this Tadiran batteryWhat does the "/F" terminal (free cable ends) mean?This model is equipped with flexible connection cables whose ends are stripped. This allows a versatile connection, for example, to screw terminals, connectors or by direct soldering in applications where standard board mounting is not possible or desired.What does the high capacity of 19 Ah mean in practice?A capacity of 19 Ah means a very large energy reserve. A device that, for example, consumes an average current of 100 microamperes (µA), could theoretically be operated with this battery for over 20 years without the need to replace the battery.For which devices is this battery type suitable?This battery type is ideal for professional electronics that require an extremely long and maintenance-free runtime. Typical applications are long-term data loggers, remote control systems, emergency call systems and other self-sufficient systems with low to moderate current consumption.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is hazardous and may lead to overheating, leakage or bursting of the cell.What does the passivation effect mean in this battery?After extended storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. At the first load, especially with higher currents, it can cause a short voltage delay. This should be taken into account in the circuit design of the application.
The Tadiran SL-860S is a primary high-performance lithium thionyl chloride battery in the widely used AA (Mignon) form factor. It was designed for professional applications requiring very high capacity and long service life. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is a reliable energy solution for long-life electronic devices. This model is the standard design for use in battery holders.Highlights at a glanceVery high capacity: 2.4 Ah for maximised extended and autonomous operating time.Standardised design: Common AA (Mignon) size for broad compatibility.High nominal voltage: Stable voltage of 3.6 V throughout almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-860S is the perfect choice for replacing conventional batteries in devices where frequent battery replacement is undesirable or costly. It is excellent for professional initial equipment in metering technology (water, gas, electricity), for memory backups (RTC, CMOS) in computers and controls, as well as in alarm systems, security systems and industrial sensors that rely on AA battery holders.Engineered for maximum safety and efficiencyThe safety and durability of the SL-860S are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces the overall operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low current drain. A characteristic feature is the passivation effect: A thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long shelf and operating life. This ensures that the energy is still reliably available even after many years. Characteristics ModelTadiran SL-860/S TechnologyLithium thionyl chloride (high current) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 20 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran batteryDoes this model have solder tabs or wires?No, the SL-860S model is the standard version with regular battery contacts and intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers variants of this cell type with different solder tabs.For which applications is this battery type suitable?This type of battery is ideal for professional electronics that require extremely long service life and use AA batteries. Typical applications are meters, industrial computers, alarm systems and long-life sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. When the battery is first put under load, especially at higher currents, it can lead to a brief voltage delay. This should be taken into account in the application’s circuit design.How long is the battery shelf life and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storage in a cool and dry place with low humidity.
The Tadiran SL-2780P is a revolutionary PulsesPlus hybrid battery in the standard size D (mono). It was developed for demanding long-term applications that require both a very high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium-thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). This version is pre-assembled with axial wire (pins) for a fixed and vibration-proof installation.Highlights at a glanceHigh pulse current capability: Ideal for applications with high peak current requirements (up to 3 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Very high capacity: 16.5 Ah from the primary cell for extremely long, self-sufficient runtimes.Ready to install: With robust, axial wire for direct and safe solder mounting.Maximum service life: Low self-discharge of the primary cell and gentle operation.Powerful in a wide range of applicationsThe Tadiran SL-2780P is the optimum energy solution for applications that must operate for years or even decades without maintenance and periodically require high power for transmission processes. Its primary areas of use include long-term asset tracking systems, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements and demanding military applications in which the energy source is permanently soldered.PulsesPlus technology: Maximum energy and performanceThe core of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 16.5 Ah serves as long-term energy storage and continuously charges the parallel-connected hybrid layer capacitor (HLC). If the application requires a high current pulse, this is supplied directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and thus ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unrivalled advantages. It combines the extremely high energy density and low self-discharge of a lithium-thionyl chloride cell with the high power density of a capacitor. The result is an energy source that remains operational for decades and can deliver high power immediately when required, even after long periods of inactivity and at low temperatures. Characteristics ModelTadiran SL-2780/P TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeD (mono) Rated voltage (V)3.6 Capacity (mAh)16500 Max. continuous discharge current500 mA Max. pulse current3000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 60.0 Weight (g)approx. 95 ConnectionAxial wire (P) RechargeableNo FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-life lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for an extremely long service life, while the capacitor provides the high power for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high power surges. A typical example is an asset tracker that sends its position once a day via mobile radio. The voltage of a standard battery would collapse with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application's point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never experiences the high load. This effectively avoids the voltage dip that occurs in standard cells due to the passivation layer.What does the "axial wire" connection mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative terminals of the cell. This configuration is intended for through-hole mounting (Through-Hole) on printed circuit boards (PCBs) and enables a very robust and durable soldered connection.Is this system rechargeable?No, this is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is charged only by the primary cell itself.
The Tadiran SL-886P is a primary high-performance lithium thionyl chloride battery in the special size 1/6 D. It is characterised by an exceptionally high energy density and offers a very high capacity of 1.7 Ah in an extremely compact housing. This version is equipped with robust pins for direct and secure mounting on circuit boards. With its nominal voltage of 3.6 V, it is the ideal energy solution for professional and long-lasting electronics with special space requirements.Highlights at a glanceVery high energy density: 1.7 Ah capacity in special 1/6 D compact form factor.For PCB mounting: Pre-assembled with pins for a robust and durable soldered connection.High rated voltage: Stable voltage of 3.6 V for almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-886P was specifically developed for demanding applications that require a high and long-lasting energy reserve in the smallest of spaces. Its main areas of use include professional medical technology, military communication and monitoring systems, industrial sensors, and other specialised electronic devices where standard sizes cannot be used.Designed for maximum safety and efficiencyThe safety and longevity of the SL-886P are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, which minimises maintenance costs and lowers the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating capability. This ensures that the energy remains reliably available even after many years. Features ModelTadiran SL-886/P TechnologyLithium thionyl chloride (high current) Size1/6 D Nominal voltage (V)3.6 Capacity (mAh)1700 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x H, mm)approx. 33.1 x 10.5 Weight (g)approx. 22 ConnectionPins / printed contacts (P) RechargeableNo FAQs about this Tadiran batteryWhat is special about the 1/6 D size?The 1/6 D size is a specialised industrial form factor and not a common consumer standard. It was developed to provide high capacity in devices with special, compact space requirements where standard sizes such as AA do not fit.What does connection with pins mean?This model is equipped with connection pins that enable an extremely robust and mechanically stable connection when soldered directly onto a printed circuit board (PCB). This is especially important for devices that are exposed to shocks or vibrations.For which applications is this battery type suitable?This type of battery is ideal for specialised professional electronic devices in which the battery is permanently soldered in and a very long service life in a compact housing is essential. Typical applications can be found in medical technology, military equipment, and industrial sensor technology.Is this battery rechargeable?No, this is a primary lithium battery and under no circumstances should it be charged. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is responsible for the extremely low self-discharge. During the first load, especially with higher currents, it may cause a short voltage delay. This should be taken into account in the circuit design of the application.
The PANASONIC CR-2/3A is a high-performance 3-volt lithium primary battery, developed for professional and industrial applications with the highest demands on longevity and reliability. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge, and a very wide operating temperature range. As a loose cell ("bulk"), it is the ideal energy source for the initial equipment (OEM) of durable and low-maintenance electronic devices.Highlights at a glanceExtreme longevity: Up to 10 years storage thanks to extremely low self-discharge.High energy density: Maximum energy in a compact design for long-lasting self-sufficiency.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High capacity: 1650 mAh for energy-intensive applications with long runtime requirements.Industrial top quality: Developed and manufactured for demanding OEM applications and safety-relevant electronics.Reliable energy for long-term applicationsThe PANASONIC CR-2/3A is the preferred energy source for "fit and forget" applications where a battery change is not intended for years. Its main area of use is the supply of memory modules (SRAM/CMOS backup) and real-time clocks (RTC) in industrial PCs and controllers (PLCs). It is also ideal for use in the metering industry (smart metering for water, gas, electricity), in safety sensors, in the automotive sector and in medical technology.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts and an extremely low self-discharge rate of less than 1% per year at room temperature. This guarantees maximum readiness for use even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs a highly specialised single cell, the CR-2/3A is optimised for industrial processing and configuration for battery solutions. Its robust construction and high quality ensure process-safe integration in final devices. With this cell, PANASONIC offers developers and manufacturers a reliable and high-performance platform for developing long-lasting and low-maintenance products. Characteristics ModelPANASONIC Lithium battery CR-2/3A TechnologyLithium manganese dioxide (Li-MnO2) Nominal voltage (V)3.0 Capacity (mAh)1650 Dimensions (Ø x H in mm)17.0 x 34.5 ConnectionIndustrial cell (flat terminal) Weight (g)approx. 17 FAQs about the PANASONIC Lithium Battery CR-2/3AWhat is the main advantage of this lithium battery?The crucial advantage is the extremely long service and storage life of up to 10 years, combined with a very broad operating temperature range. It reliably supplies energy for many years and is therefore ideal for maintenance-free devices in which the battery is permanently installed.Is this battery rechargeable?No. This is a lithium primary battery. It must not under any circumstances be attempted to recharge it. Attempts to charge are extremely dangerous and can lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the CR-2/3A is usually configured with welded solder pins or solder tabs so that it can then be securely soldered onto a printed circuit board. It can also be used in special battery holders.What does the size designation "2/3 A" mean?This means that the cell has the same diameter as an A cell, but only about two thirds of its height. This compact design enables use in space-critical applications that require more capacity than a 1/2 AA cell.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
This PANASONIC BR-AG is a highly specialised 3-volt lithium battery in AA size, developed for fail-safe power supply in the most demanding industrial applications. Based on extremely reliable lithium polycarbon monofluoride (Li-(CF)n) technology, this cell offers an exceptionally long service life and operational reliability, especially in environments with extreme temperatures. As a loose cell ("bulk"), it is the first choice for powering PLC controllers and other critical industrial applications.Highlights at a glanceMaximum reliability: Developed for the fail-safe buffering of program memory in CNC and PLC controllers.Extreme longevity: Very low self-discharge and a service life of up to 10 years and more.Extremely high temperature range: Guarantees stable performance across a wide operating temperature range from -40 °C to +85 °C.Stable voltage: Constant 3-volt output for the reliable supply of sensitive electronics.High capacity: 2200 mAh for lasting autonomy in demanding applications.Fail-safe power for industrial controllersThis PANASONIC BR-AG battery is the preferred energy source for memory buffering (memory backup) in a variety of machine tools and automation systems. It is typically used in programmable logic controllers (PLC), industrial computers and metering systems (smart metering) that are exposed to extreme environmental conditions. Its main task is to reliably preserve volatile program memory and system parameters in the event of a power failure or when the machine is shut down.Superior lithium polycarbon monofluoride technologyThe lithium polycarbon monofluoride technology (BR series) is the key to this battery's exceptional reliability. Compared to lithium manganese dioxide technology (CR series), it offers even lower self-discharge, a flatter discharge curve and superior performance at very high ambient temperatures as commonly found in industrial control cabinets. This guarantees maximum operational safety throughout its long service life.Developed for professional useThis battery is designed as a direct replacement and OEM component. As a highly specialised single cell, the BR-AG is optimised for industrial processing and assembling into battery solutions. Its robust construction and high quality guarantee process-safe integration into end devices for permanently reliable function. Features ModelPANASONIC Lithium Battery BR-AG TechnologyLithium-carbon monofluoride (Li-CF) Nominal voltage (V)3.0 Capacity (mAh)2200 Dimensions (Ø x H in mm)17.0 x 45.5 ConnectionCable with plug Weight (g)approx. 18 FAQs about the PANASONIC BR-AG battery packWhat is the main advantage of BR technology over CR technology?BR technology (lithium polycarbon monofluoride) is designed for maximum reliability and longevity at extreme temperatures. It has an even lower self-discharge rate than CR technology and a very stable voltage over almost the entire service life. It is the first choice for critical, low-maintenance industrial applications. CR technology, on the other hand, often offers higher pulse load capacity.Is this battery pack rechargeable?No. This is a lithium primary battery. It must never be attempted to recharge it under any circumstances. Charging attempts are extremely dangerous and can lead to fire or explosion.Can I use this 3V battery as a substitute for a standard 1.5V AA battery?No, absolutely not. This BR-AG cell has a nominal voltage of 3 volts. Standard AA batteries (alkaline, NiMH) have 1.5 or 1.2 volts. The use of this 3V battery in a device designed for 1.5V would almost certainly destroy the device's electronics.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly disposal.
This PANASONIC BR-A is a highly specialised 3-volt lithium battery in size A, developed for fail-safe power supply in the most demanding industrial applications. Based on the extremely reliable lithium polycarbon monofluoride technology (Li-(CF)n), this cell offers an exceptionally long service life and operational reliability, particularly in environments with extreme temperatures. As a loose cell ("bulk"), it is the first choice for powering PLC controllers and other critical industrial applications.Highlights at a glanceMaximum reliability: Developed for fail-safe buffering of program memories in CNC and PLC controllers.Extreme longevity: Very low self-discharge and a service life of up to 10 years or more.Extremely wide temperature range: Guarantees stable performance in a wide operating temperature range from -40 °C to +85 °C.Stable voltage: Constant 3-volt voltage for reliably powering sensitive electronics.High capacity: 1800 mAh for long-lasting autonomy in demanding applications.Fail-safe power for industrial controllersThis PANASONIC BR-A battery is the preferred energy source for memory buffering (memory backup) in a wide range of machine tools and automation systems. It is typically used in programmable logic controllers (PLCs), industrial computers and metering systems (smart metering) exposed to extreme environmental conditions. Its main task is to reliably preserve the volatile program memory and system parameters in the event of a power failure or when the machine is switched off.Superior lithium polycarbon monofluoride technologyThe lithium polycarbon monofluoride technology (BR series) is the key to this battery's exceptional reliability. Compared to lithium manganese dioxide technology (CR series), it offers even lower self-discharge, a flatter discharge curve and superior performance at very high ambient temperatures, as are often found in industrial machine control cabinets. This guarantees maximum operational reliability throughout the long service life.Developed for professional applicationsThis battery is designed as a direct replacement and OEM component. As a highly specialised single cell, the BR-A is optimised for industrial further processing and assembly into battery solutions. Its robust construction and high quality ensure process-safe integration into end devices for permanently reliable operation. Features ModelPANASONIC Lithium Battery BR-A TechnologyLithium-Carbon Monofluoride (Li-CF) Nominal voltage (V)3.0 Capacity (mAh)1800 Dimensions (Ø x H in mm)17.0 x 50.0 ConnectionIndustrial cell (flat pole) Weight (g)approx. 18 FAQs about the PANASONIC BR-A battery packWhat is the main advantage of BR technology over CR technology?BR technology (lithium polycarbon monofluoride) is designed for maximum reliability and longevity at extreme temperatures. It has an even lower self-discharge than CR technology and a very stable voltage over almost the entire service life. It is the first choice for critical, low-maintenance industrial applications. In return, CR technology often offers higher pulse load capability.Is this battery pack rechargeable?No. This is a lithium primary battery. Under no circumstances should it be recharged. Attempting to charge is extremely dangerous and can lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the BR-A is usually assembled with welded solder pins or tabs in order to solder it securely onto a circuit board. It can also be used in special battery holders designed for the A size.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
This PANASONIC BR-C is a highly specialised 3-volt lithium battery in size C, developed for fail-safe power supply in the most demanding industrial applications. Based on the extremely reliable lithium polycarbon monofluoride technology (Li-(CF)n), this cell offers an exceptionally long service life and operational reliability, especially in environments with extreme temperatures. As a loose cell ('bulk'), it is the first choice for supplying PLC controllers and other critical industrial applications.Highlights at a glanceMaximum reliability: Developed for fail-safe buffering of program memories in CNC and PLC controls.Extreme longevity: Very low self-discharge and a service life of up to 10 years or more.Extremely wide temperature range: Guarantees stable performance in a wide operating temperature range from -40°C to +85°C.Stable voltage: Constant 3-volt voltage for the reliable supply of sensitive electronics.Very high capacity: 5000 mAh for maximum autonomy in demanding applications.Fail-safe energy for industrial controlsThis PANASONIC BR-C battery is the preferred energy source for memory buffering (memory backup) in a wide range of machine tools and automation systems. It is typically used in programmable logic controllers (PLC), industrial computers and metering systems (smart metering) that are exposed to extreme environmental conditions. Its main function is to reliably maintain the volatile program memories and system parameters in the event of a power failure or when the machine is switched off.Superior lithium polycarbon monofluoride technologyThe lithium polycarbon monofluoride technology (BR series) is the key to the exceptional reliability of this battery. Compared to lithium manganese dioxide technology (CR series), it offers even lower self-discharge, a flatter discharge curve and superior performance at very high ambient temperatures, as often found in control cabinets of industrial machines. This guarantees maximum operational reliability over the entire long service life.Developed for professional useThis battery is designed as a direct replacement and OEM component. As a highly specialised single cell, the BR-C is optimised for industrial processing and configuration into battery solutions. Its robust construction and high quality ensure process-reliable integration into end devices for consistently reliable operation. Characteristics ModelPANASONIC Lithium Battery BR-C TechnologyLithium carbon monofluoride (Li-CF) Nominal voltage (V)3.0 Capacity (mAh)5000 Dimensions (Ø x H in mm)26.0 x 50.0 ConnectionIndustrial cell (flat terminal) Weight (g)approx. 42 FAQs about the PANASONIC BR-C battery packWhat is the main advantage of BR technology over CR technology?BR technology (lithium polycarbon monofluoride) is designed for maximum reliability and longevity at extreme temperatures. It has an even lower self-discharge than CR technology and a very stable voltage over almost the entire lifetime. It is the first choice for critical, low-maintenance industrial applications. CR technology, on the other hand, often offers higher pulse load capability.Is this battery pack rechargeable?No. This is a lithium primary battery. Under no circumstances should it be attempted to recharge. Charging attempts are extremely dangerous and can lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the BR-C is usually configured with welded solder pins or solder tabs to then be safely soldered onto a circuit board. It can also be used in special battery holders designed for the C size.How must this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please dispose of the empty battery at the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The Saft LS14250 is a high-performance and long-lasting lithium thionyl chloride battery (Li-SOCl2) developed for demanding electronic devices. It offers a nominal voltage of 3.6 V and a capacity of 1.2 Ah. Thanks to its robust construction and low self-discharge, it is the ideal choice for long-term applications where reliability comes first. The cell is characterised by an exceptionally long service life and a wide operating temperature range.Highlights at a glancePowerful: 1.2 Ah capacity at 3.6 V – 4.32 Wh total energyLong-lasting: Extremely low self-discharge of under 1% per yearReliable: High and stable operating voltage throughout service lifeRobust: Stainless steel housing with hermetic glass-metal sealVersatile: Wide operating temperature range from -60°C to +85°CPowerful in a variety of applicationsThe LS14250 stands out due to its high energy density and its compact design in the 1/2 AA format. This makes it extremely versatile and ideally suited for burglar alarm and security systems, toll systems, memory back-up, computer real time clocks, tracking systems, as well as professional electronics. Thanks to its broad temperature range, the battery guarantees reliable performance even under extreme conditions.Efficiency and safety with systemThe proven lithium thionyl chloride technology ensures constant and reliable power output. The non-flammable electrolyte and the hermetic sealing guarantee the highest standards of safety during operation. The cell is compliant with IEC 60086-4 safety standard and is UL certified. The storage life of up to 10 years makes the Saft LS14250 an economical and sustainable energy solution.Robust Li-SOCl2 technologyThe lithium thionyl chloride technology used stands for high energy density, stability and a long service life. Compared to other primary cells, this technology offers superior performance, especially in applications with low continuous current. The low self-discharge and high corrosion resistance ensure your devices function for many years. Characteristics ModelSaft LS14250 TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionStandard (industrial head) RechargeableNo FAQs about the Saft LS14250 lithium round cellHow long can the Saft LS14250 be stored?The battery has a very low self-discharge of less than 1% per year when stored at +20°C. This enables storage for up to 10 years without significant loss of capacity.Is the Saft LS14250 rechargeable?No, the Saft LS14250 is a primary battery. It is not designed for recharging. Any attempt to recharge the battery is a safety risk and may cause damage or leakage of the cell.What applications is the LS14250 battery suitable for?The LS14250 is ideal for applications which require low but constant power supply over a long period. These include, among others, memory back-ups for control units, real time clocks in computers, burglar alarms, tracking systems, and various measuring devices.Can this battery be used as a replacement for other models such as ER14250?Yes, the Saft LS14250 is, in many cases, a suitable replacement for batteries designated ER14250, as it has the same size and comparable electrical properties. However, it is recommended to check the device manufacturer's specific requirements.Within which temperature range can the battery be used?The Saft LS14250 offers an exceptionally wide operating temperature range of –60°C to +85°C and thus assures reliable operation even under extreme environmental conditions.
The Saft LS14250 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2), configured with U-shaped solder terminals for flexible and robust mounting. This special version is based on the proven LS14250 cell and offers a nominal voltage of 3.6 V as well as a capacity of 1.2 Ah. Thanks to its extremely low self-discharge and high reliability, it is the ideal power source for durable industrial electronics where a secure and long-lasting connection is required.Highlights at a glanceFlexible mounting: U-shaped solder terminals (LF-U) for versatile installation positionsPowerful: 1.2 Ah capacity at 3.6 V for persistent power supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage throughout the entire service lifeRobust: Hermetically sealed stainless steel housing for highest operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for versatile industrial applicationsThe Saft LS14250 LF-U was developed for use in professional devices where the battery is not soldered directly onto a board but requires a flexible connection. The U-shaped solder terminals enable a secure connection with cables or in special battery holders. Typical application areas include memory backup systems, alarm systems, medical devices, meters and industrial control units that require a reliable and long-lasting power supply.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed to minimise the risk of leakage current, and it has a non-flammable electrolyte which significantly increases operational safety. The LS14250 LF-U conforms to the IEC 60086-4 safety standard and is UL certified. This underlines its suitability for demanding applications that require maximum reliability.Robust Li-SOCl2 technology for industrial useLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after long storage. The robust construction with stainless steel housing and glass-to-metal seal protects the cell reliably against corrosion and environmental influences, thus ensuring the functionality of your application throughout the entire product lifecycle. Features ModelSaft LS14250 LF-U TechnologyLithium Thionyl Chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionSolder tag (U-shape) RechargeableNo FAQs on the Saft LS14250 LF-U lithium cylindrical cellWhat does the designation LF-U mean?The designation LF-U describes the type of connection of the battery. "LF" stands for solder tag and the "U" specifies their shape as U-shaped solder tags. These allow cables to be soldered or for use in certain holders.Is the Saft LS14250 LF-U rechargeable?No, the LS14250 LF-U is a lithium primary battery and must under no circumstances be recharged. Attempting to recharge it is dangerous and can cause destruction of the cell, leakage, or even explosion.For which applications is this version with solder connections suitable?This version is ideal for applications where the battery is not plugged directly onto a circuit board. It is often used to replace older batteries with soldered cables or for devices requiring a flexible, wired connection to the power supply.What is the difference to the versions with pins (e.g. 2PF)?While versions with pins (PF) are designed for direct mounting in suitably prepared holes on a circuit board, solder connections (LF-U) provide more flexibility. Cables of various lengths can be soldered on, allowing the battery to be positioned freely inside the device housing.How should the LS14250 LF-U be correctly stored and disposed of?The battery should be stored in a dry and cool place to ensure minimal self-discharge. As a lithium battery, it is subject to special disposal regulations and must be taken to the relevant municipal collection points or specialist retailers. Disposal in household waste is not permitted.
The Saft LS14250 with Z solder tag is a high-performance lithium thionyl chloride battery (Li-SOCl2), designed for horizontal mounting on printed circuit boards. This version is based on the reliable LS14250 cell and offers a nominal voltage of 3.6 V and a capacity of 1.2 Ah. The specially shaped Z solder terminals enable a flat and space-saving installation. Thanks to its extremely low self-discharge, it is the ideal energy source for long-life industrial electronics.Highlights at a GlanceFlat mounting: Z-shaped solder terminals for horizontal board mountingPowerful: 1.2 Ah capacity at 3.6 V for long-lasting power supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage over the entire service lifeRobust: Hermetically sealed stainless steel case for the highest operational safetyVersatile: Usable over a wide temperature range from -60 °C to +85 °CPowerful for Compact Industrial ApplicationsThe Saft LS14250 with Z solder tag was specially developed for use in professional devices where low overall height of components is critical. The Z-shaped terminals make it possible to solder the battery flat directly to the PCB, allowing for very flat device designs. It is excellent for memory backup systems, real-time clocks, meters, sensors and compact industrial assemblies.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed to minimise the risk of current leakage, and contains a non-flammable electrolyte, significantly increasing operational safety. The LS14250 conforms to the IEC 60086-4 safety standard and is UL certified. This underlines its suitability for demanding applications where maximum reliability is crucial.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after long storage times. The robust construction with stainless steel casing and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus ensuring the functionality of your application over its entire product life. Technical Features ModelSaft LS14250 (Z solder tag) TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. Continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionZ solder tag RechargeableNo FAQs about the Saft LS14250 with Z solder tagWhat is the advantage of a Z solder tag?The Z-shaped solder tag is specially designed for horizontal (flat) mounting of the battery on a printed circuit board. This allows a very low installation height and is ideal for compact electronic devices where height space is limited.Is the Saft LS14250 with Z solder tag rechargeable?No, this is a lithium primary battery that is not rechargeable. Any attempt to recharge the battery is dangerous and may lead to destruction of the cell, leakage or explosion.How is this version different from one with axial pins?While versions with axial pins (e.g. 2PF) are designed for vertical mounting in holes on a printed circuit board, the version with Z solder tag is designed exclusively for horizontal surface mounting by soldering. The choice depends on the board layout and the space available.For which applications is this battery particularly suitable?This version is ideal for all applications where a long-life backup battery is required and at the same time a very flat design is to be realised. Examples include compact data loggers, flat sensor modules or memory modules in notebooks and industrial computers.How should the LS14250 with Z solder tag be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be handed in at appropriate municipal collection points or in specialist shops. Disposal in household waste is not permitted.
The Saft LS14250 2PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2), developed for demanding industrial applications. It combines the proven performance of the LS14250 cell with robust axial connection wires (pins) for secure and permanent mounting directly on circuit boards. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it offers an exceptionally reliable long-term energy solution, characterised by minimal self-discharge and high operational reliability.Highlights at a glanceReady to install: Two axial connection wires (2PF) for direct solder mountingPowerful: 1.2 Ah capacity at 3.6 V for long-lasting power supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage over the entire service lifeRobust: Hermetically sealed stainless steel housing for maximum safetyVersatile: Can be used in a wide temperature range from -60 °C to +85 °CPowerful for demanding electronicsThe Saft LS14250 2PF was specially designed for use in professional electronics where a fixed and vibration-proof power source is required. Thanks to the integrated axial pins, it is ideal for circuit board mounting in measuring devices, sensors, memory backup systems (memory back up), alarm systems and industrial control units (PLC). Its high energy density and compact 1/2 AA form factor enable space-saving and efficient integration into your devices.Efficiency and safety with a systemThe proven lithium thionyl chloride technology guarantees reliable energy delivery over many years. The cell is hermetically sealed to minimise the risk of current leakage and features a non-flammable electrolyte, which significantly increases operational safety. The LS14250 2PF complies with IEC 60086-4 safety standard and is UL certified, underscoring its suitability for demanding industrial applications.Robust Li-SOCl2 technology for industryThe lithium thionyl chloride chemistry stands for superior energy density and long service life. Compared to other battery technologies, it offers stable voltage right up to the end of the discharge cycle. The robust construction with stainless steel housing and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus ensuring the functionality of your application over the entire product lifespan. Features ModelSaft LS14250 2PF TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 Connection2 radial pins (2PF) RechargeableNo FAQs about the Saft LS14250 2PF lithium round cellWhat does the designation 2PF mean?The designation 2PF refers to the configuration of the battery. It means that the cell is factory-fitted with two robust, axial connection wires (pins). These allow simple and secure solder mounting directly onto a circuit board.Is the Saft LS14250 2PF rechargeable?No, the LS14250 2PF is a lithium primary battery and must not be charged under any circumstances. Attempting to charge it is dangerous and can result in destruction of the cell, leakage or an explosion.For which applications is this battery with solder pins suitable?This version is especially designed for permanently installed applications where the battery is soldered directly onto a circuit board. Typical uses are memory retention (memory back up) for control systems, security technology, industrial sensors and counters.How long is the service life of the LS14250 2PF in operation?The service life strongly depends on the application, the current draw and the ambient temperature. However, thanks to the extremely low self-discharge, the battery can reliably deliver energy for over 10 years in low power applications.How should the LS14250 2PF be stored and disposed of?The battery should be stored in a dry and cool place to keep self-discharge as low as possible. As a lithium battery, it must not be disposed of with household waste but must be taken to special battery collection points.
The Saft LS14250 3PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2) designed for reverse polarity safe mounting in demanding electronic assemblies. It is based on the proven LS14250 cell and is equipped with three axial connection wires (pins), which ensure clear and secure positioning on the printed circuit board. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it offers an extremely reliable long-term energy solution for industrial applications.Highlights at a glanceReverse polarity safe: Three axial connection wires (3PF) for error-free solder mountingPowerful: 1.2 Ah capacity at 3.6 V for enduring power supplyExtremely long-lasting: Very low self-discharge of under 1% per yearReliable: Constant and stable operating voltage throughout the battery's lifetimeRobust: Hermetically sealed stainless steel case for highest safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for safety-critical electronicsThe Saft LS14250 3PF was specially developed for use in professional electronics, where a long-lasting and reverse polarity safe energy source is essential. Thanks to the 3 pin configuration, it is ideal for mounting on PCBs in safety-critical applications such as memory backup systems, real-time clocks (RTC), industrial control units (PLC), meters, and complex sensors. Its high energy density and the compact 1/2 AA design enable space-saving and secure integration.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable power delivery over many years. The cell is hermetically sealed to minimise the risk of leakage current and features a non-flammable electrolyte, which significantly increases operational safety. The LS14250 3PF complies with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for demanding applications where maximum reliability is required.Robust Li-SOCl2 technology for industryThe lithium thionyl chloride chemistry stands for superior energy density and a long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle. The robust construction with stainless steel case and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus ensuring the functionality of your application over the entire product life. Characteristics ModelSaft LS14250 3PF TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 Connection3 radial pins (3PF) RechargeableNo FAQs about the Saft LS14250 3PF lithium round cellWhat does the designation 3PF mean and what is the purpose of the third pin?The designation 3PF means that the battery is equipped with three axial connection wires (pins). While two pins serve as positive and negative poles, the third pin provides mechanical coding. This prevents incorrect insertion or soldering of the battery on the PCB and protects the electronics from damage caused by reverse polarity.Is the Saft LS14250 3PF rechargeable?No, the LS14250 3PF is a lithium primary battery that is not rechargeable. Any attempt to recharge the battery poses a significant safety risk and can destroy the cell.In which devices is this special 3 pin version used?This version is mainly used in industrial and safety-related electronics, where incorrect installation of the battery must be avoided at all costs. Typical applications are long-life memory buffering (SRAM, RTC) in control units, medical devices, and complex measurement systems.How does the 3PF differ from the 2PF version?Both versions are based on the same battery cell and have identical electrical properties. The only difference is the number of connection wires. The 3PF version has an additional mechanical reverse polarity protection thanks to the third pin, which the 2PF version does not have.How should the LS14250 3PF be stored and disposed of properly?The battery should be stored in a dry and cool place to ensure minimal self-discharge. As a lithium battery, it is subject to special disposal regulations and must be taken to the relevant municipal collection points or a specialised dealer. Disposal with household waste is not permitted.
The Saft LS14250 3PFRP is a highly specialised lithium thionyl chloride battery (Li-SOCl2) designed for reverse polarity safe and defined assembly in demanding electronic assemblies. It is based on the proven LS14250 cell and is fitted with three axial connection wires (pins) in a specific arrangement. The suffix RP (Reversed Position) denotes a pin configuration rotated by 180 degrees compared to the standard. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it provides an extremely reliable long-term energy solution for industrial applications.Highlights at a GlanceSpecific mounting: 3 axial pins in reversed position (3PFRP) for defined mounting positionsReverse polarity safe: The 3 pin arrangement prevents incorrect solderingPowerful: 1.2 Ah capacity at 3.6 V for enduring energy supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage throughout the entire service lifeRobust: Hermetically sealed stainless steel housing for maximum safetyPowerful for specific industrial applicationsThe Saft LS14250 3PFRP was specially developed for use in professional electronics, where a durable and mechanically precisely defined energy source is essential. Thanks to the specific 3 pin configuration, it is ideal for PCB mounting in memory backup systems (memory back up), real time clocks (RTC), industrial controller units (PLC) and counters, whose layout requires this special pin configuration. Its high energy density and compact 1/2 AA form factor enable space-saving and process-safe integration.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable power delivery over many years. The cell is hermetically sealed to minimise the risk of leakage current and features a non-flammable electrolyte, which significantly increases operational safety. The LS14250 3PFRP complies with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for demanding applications where maximum reliability is essential.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and long service life. Compared to other battery technologies, it offers a stable voltage level up to the end of the discharge cycle. The robust design with stainless steel housing and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus safeguarding the functionality of your application throughout the entire product service life. Characteristics ModelSaft LS14250 3PFRP TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 Connection3 radial pins (RP) RechargeableNo FAQs about the Saft LS14250 3PFRP lithium round cellWhat does the designation 3PFRP mean?The designation 3PFRP describes the assembly of the battery. "3PF" stands for three axial solder pins which ensure reverse polarity safety. The suffix "RP" stands for "Reversed Position" and means that the pins are arranged 180 degrees rotated compared to the standard 3PF version. This variant is required for specific PCB layouts.Is the Saft LS14250 3PFRP rechargeable?No, the LS14250 3PFRP is a lithium primary battery and is not rechargeable. Any attempt to charge the battery poses a significant safety risk and can lead to the destruction of the cell.Can I replace a 3PFRP version with a normal 3PF version?No, a direct replacement is generally not possible. The reversed pin arrangement of the 3PFRP version is mechanically coded and only fits on PCBs that are specifically designed for this configuration. Please check your application’s requirements carefully.For which applications is this special 3PFRP version required?This version is used in industrial electronics where the PCB layout requires the battery to be mounted in a rotated position to, for example, save space or optimise track routing. Typical areas of application include durable memory buffers in controllers, counters, and medical devices.How must the LS14250 3PFRP be appropriately stored and disposed of?The battery should be stored in a dry and cool place to ensure minimal self-discharge. As a lithium battery, it is subject to specific disposal regulations and must be handed in at the relevant municipal collection points or at specialist retailers. Disposal via household waste is not permitted.
The Saft LS14250 CNA is a highly specialised lithium thionyl chloride battery (Li-SOCl2), factory-assembled with flexible axial wire connections. This version is based on the powerful LS14250 cell and offers a nominal voltage of 3.6 V and a capacity of 1.2 Ah. The wire connections allow for versatile and straightforward integration into applications requiring a wired energy solution. Thanks to its extremely low self-discharge, it is the ideal choice for long-lasting industrial applications.Highlights at a glanceReady to connect: Axial wire connections for flexible and direct wiringPowerful: 1.2 Ah capacity at 3.6 V for enduring power supplyExtremely long-lasting: Very low self-discharge of under 1% per yearReliable: Constant and stable operating voltage over the entire lifespanRobust: Hermetically sealed stainless-steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for flexible industrial applicationsThe Saft LS14250 with axial wire connection was developed for use in professional devices where flexible positioning of the battery within the housing is required. The attached wires allow for an easy connection to contacts on the mainboard without the need to place the battery itself on the board. It is ideally suited for memory backup systems, alarm systems, counters, localisation systems, and industrial control units.Efficiency and guaranteed safetyProven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed to minimise the risk of leakage, and has a non-flammable electrolyte, significantly increasing operational safety. The LS14250 conforms to safety standard IEC 60086-4 and is UL certified. This underlines its suitability for demanding applications where maximum reliability is required.Robust Li-SOCl₂ technology for industryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage up to the end of the discharge cycle, even after long storage times. The robust construction with stainless steel housing and glass-to-metal seal reliably protects the cell against corrosion and environmental influences and thus ensures the functionality of your application throughout the product's life. Features ModelSaft LS14250 (axial wire) TechnologyLithium-thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionAxial wire connection RechargeableNo FAQs about the Saft LS14250 with axial wire connectionWhat is the advantage of axial wire connections?Axial wire connections offer maximum flexibility when installing. The battery does not have to sit directly on a PCB, but can be placed at any suitable location in the housing and connected to the electronics using the wires. This is especially useful when PCB space is limited.Is the Saft LS14250 with wires rechargeable?No, this is a lithium primary battery, which is not rechargeable. Any attempt to recharge the battery is dangerous and can cause cell destruction, leakage, or even an explosion.How does this version differ from a standard LS14250 cell?The battery cell itself is identical to the standard LS14250. The only difference lies in the assembly. This version comes from the factory with permanently connected axial wires, eliminating the need for manual soldering during installation and ensuring a reliable connection.Can the wires be extended or shortened?Yes, the wires can be shortened as required by your application. Extension is also possible but should be done professionally with appropriate connectors or solder points and suitable insulation to ensure electrical safety.How should the LS14250 with wire connection be correctly disposed of?Being a lithium battery, it is subject to special disposal regulations. It must be handed in at appropriate municipal collection points or authorised specialist dealers. Disposal with household waste is not permitted. Before disposal, the wire ends should be insulated to prevent short circuits.
The Saft LS14500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in the standard AA size, developed for demanding industrial applications with high energy demand. It offers a nominal voltage of 3.6 V and a superior capacity of 2.6 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications that demand maximum reliability and long operating life.Highlights at a GlanceHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long storageRobust: Hermetically sealed stainless steel case for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for Versatile Industrial ApplicationsThe Saft LS14500 in AA format is the perfect energy solution for a wide variety of professional and industrial devices. Its high energy density makes it the first choice for wireless alarm systems, memory backup systems (memory back up), gas, water or electricity meters (metering), professional electronics as well as tracking systems. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed with a glass to metal seal to minimise the risk of leakage, and features a non-flammable electrolyte, which significantly increases operational safety. The LS14500 is compliant with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for safety-critical applications.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage down to the end of the discharge cycle, even after long storage periods. The robust construction reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application throughout the entire product lifetime. Features ModelSaft LS14500 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal Voltage (V)3.6 Capacity (mAh)2600 Max. Continuous Discharge Current50 mA Self-dischargeapprox. 1% per year Operating Temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionStandard (industrial head) RechargeableNo FAQs on the Saft LS14500 Lithium Cylindrical CellCan I replace a standard 1.5 V AA battery with a Saft LS14500?No, definitely not. The Saft LS14500 has a voltage of 3.6 V, which is more than double that of an ordinary alkaline or lithium AA battery (1.5 V). Using it in a device designed for 1.5 V batteries would immediately and irreparably damage the electronics.Is the Saft LS14500 rechargeable?No, the LS14500 is a lithium primary battery and must not under any circumstances be recharged. Any attempt to do so is dangerous and can lead to destruction of the cell, leakage or explosion.For which applications is the LS14500 particularly well suited?It is ideal for professional applications with low continuous current, which must function reliably for many years. These include, in particular, battery-operated sensors, meters (electricity, gas, water), security technology, memory buffering (memory back up) and GPS trackers.What is the difference to the Saft LS14250?The principal difference is in the size and capacity. The LS14500 is AA size and offers a capacity of 2.6 Ah. The LS14250, on the other hand, is half size (1/2 AA) and consequently has a lower capacity of 1.2 Ah. The choice depends on the energy requirement and available space in the application.How should the LS14500 be correctly disposed of?As a lithium battery it is subject to special disposal regulations. It must be given to appropriate municipal collection points or specialist retailers. Disposal with household waste is not permitted.
The Saft LS14500 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, which is assembled with U-shaped solder tags for flexible and robust mounting. This special version is based on the powerful LS14500 cell and offers a nominal voltage of 3.6 V as well as a high capacity of 2.6 Ah. Thanks to its extremely low self-discharge and high reliability, it is the ideal energy source for long-lasting industrial electronics.Highlights at a glanceFlexible mounting: U-shaped solder tags (LF-U) for versatile installation positionsHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1% per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Can be used in a wide temperature range from -60°C to +85°CPowerful for versatile industrial applicationsThe Saft LS14500 LF-U was designed for use in professional devices where the battery is not soldered directly onto a circuit board but requires a flexible connection. The U-shaped solder tags enable a secure connection by means of cables or in special battery holders. Typical areas of application include memory backup systems, alarm systems, medical devices, counters and industrial control units that require a reliable and long-lasting power supply.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by means of a glass-to-metal seal to minimise the risk of leakage current, and it has a non-flammable electrolyte, which significantly increases operational safety. The LS14500 LF-U complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level right to the end of the discharge cycle. The robust construction reliably protects the cell against corrosion and mechanical stress, thus ensuring the functionality of your application throughout the entire product service life. Characteristics ModelSaft LS14500 LF-U TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionSolder tag (U-shape) RechargeableNo FAQs about the Saft LS14500 LF-U lithium round cellWhat does the designation LF-U mean?The designation LF-U describes the type of connections of the battery. "LF" stands for solder tag and the "U" specifies their shape as U-shaped solder tags. These allow cables to be soldered or used in certain holders, providing a high degree of flexibility during installation.Is the Saft LS14500 LF-U rechargeable?No, the LS14500 LF-U is a lithium primary battery and must never be recharged under any circumstances. Any attempt at charging is dangerous, damages the cell and can lead to leakage or deflagration.What is the difference compared to versions with pins (e.g. 2PF)?While versions with pins (PF) are designed for direct mounting in suitable holes on a circuit board, the U-shaped solder tags (LF-U) offer more flexibility. Cables of different lengths can be soldered to them to position the battery freely in the device housing.Can this battery be used in normal devices for AA batteries?No, this battery is exclusively intended for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than twice that of a conventional 1.5 V AA battery.For which applications is this version with solder tags suitable?This version is ideal for applications where the battery is not mounted directly on a circuit board. It is often used to replace older batteries with soldered cables or in devices that require a flexible, wired connection to the power supply.
The Saft LS14500 with Z solder tag is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA format, specially developed for horizontal mounting on printed circuit boards. Based on the reliable LS14500 cell, it offers a nominal voltage of 3.6 V and a high capacity of 2.6 Ah. The specially designed Z solder terminals allow a flat and space-saving installation, ideal for compact industrial applications with high energy requirements.Highlights at a glanceFlat mounting: Z-shaped solder terminals for horizontal PCB mountingHigh capacity: 2.6 Ah in the standard AA format for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of below 1% per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable across a wide temperature range from -60 °C to +85 °CPowerful for compact industrial applicationsThe Saft LS14500 with Z solder tag was designed for use in professional devices where low component height is crucial. The Z-shaped terminals allow the battery to be soldered flat directly onto the PCB, enabling a very flat device design. It is ideal for memory backup systems (memory backup), real-time clocks, counters, sensors and compact industrial assemblies that require a long-lasting power supply.Efficiency and guaranteed safetyThe tried and tested lithium thionyl chloride technology guarantees reliable energy delivery for many years. The cell is hermetically sealed by a glass-metal seal to minimise the risk of leakage current, and has a non-flammable electrolyte. This significantly increases operational safety. The LS14500 is compliant with the IEC 60086-4 safety standard and UL certified.Robust Li-SOCl2 technology for professionalsThe lithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle. The robust construction reliably protects the cell against corrosion and mechanical stress, thereby ensuring the functionality of your application over the entire product life. Properties ModelSaft LS14500 (Z solder tag) TechnologyLithium-thionyl chloride (Li-SOCl₂) FormatAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionZ solder tag RechargeableNo FAQs about the Saft LS14500 with Z solder tagWhat is the advantage of a Z solder tag?The Z-shaped solder tag is specially designed for the horizontal (lying) mounting of the battery on a PCB. This enables a very low installation height and is ideal for compact electronic devices where height is limited.Is the Saft LS14500 with Z solder tag rechargeable?No, this is a lithium primary battery that is not rechargeable. Any attempt to charge the battery is dangerous and may result in destruction of the cell, leakage, or explosion.Can I replace a standard 1.5 V AA battery with this one?No, absolutely not. The Saft LS14500 has a voltage of 3.6 V, which is more than twice as high as a standard 1.5 V AA battery. Use in a device not designed for this would irreparably damage the electronics.How does this version differ from one with axial pins?While versions with axial pins (e.g. 2PF) are intended for vertical installation in through holes on a board, the version with Z solder tag is exclusively designed for horizontal surface mounting by soldering. The choice depends on the PCB layout and available space.How should the LS14500 with Z solder tag be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be taken to the appropriate municipal collection points or specialised dealers. Disposal with household waste is not permitted.
The Saft LS14500 2PF is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, which is equipped at the factory with two axial solder pins. This assembly enables safe and permanent mounting directly on printed circuit boards. It offers a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, making it the ideal choice for long-lasting industrial applications that require a permanently mounted power source.Highlights at a glanceReady to install: Two axial solder pins (2PF) for direct and secure PCB mountingHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely Long-lasting: Very low self-discharge of less than 1% per yearRobust: Hermetically sealed stainless steel housing for maximum safety in operationVersatile: Usable in a wide temperature range from -60°C to +85°CPowerful for industrial electronicsThe Saft LS14500 2PF was specially developed for use in professional electronics, where a vibration-resistant and permanent power supply is crucial. Thanks to the integrated solder pins, it is ideal for permanent installation in memory backup systems, alarm systems, industrial control units (PLCs), counters, and safety-critical sensors that must function reliably for many years.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output throughout the entire service life. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage. It also contains a non-flammable electrolyte, which significantly increases operational safety. The LS14500 2PF complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsThe lithium thionyl chloride chemistry delivers superior energy density and an exceptionally long service life. Compared to other battery technologies, it provides a stable voltage level up to the end of the discharge cycle. The robust construction reliably protects the cell from corrosion and mechanical stress, ensuring the functionality of your application throughout the product's service life. Features ModelSaft LS14500 2PF TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection2 radial pins (2PF) RechargeableNo FAQs about the Saft LS14500 2PF lithium round cellWhat does the designation 2PF mean?The marking 2PF describes the assembly of the battery. It means that the cell is provided with two axial solder pins (pins). These enable easy and safe through-hole mounting (Through Hole Technology) directly onto a printed circuit board.Is the Saft LS14500 2PF rechargeable?No, the LS14500 2PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to recharge is dangerous, damages the cell, and can result in leakage or venting.What is the difference to the standard LS14500 without pins?The electrical characteristics and the battery cell itself are identical. The only difference lies in the configuration. The 2PF version is intended for direct soldering onto a PCB, whereas the standard version is designed for use in battery holders.Can this battery be used in normal devices for AA batteries?No, this battery is intended solely for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than double that of a conventional 1.5 V AA battery. Furthermore, the solder pins prevent use in standard battery holders.How is the battery mounted correctly on a PCB?The battery is inserted through the designated holes on the PCB and then soldered. It is essential to ensure the correct polarity, which is marked on the battery, to avoid damaging the electronics.
The Saft LS14500 3PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2) in AA size, developed for reverse polarity-proof installation in demanding electronics. It is based on the powerful LS14500 cell and is equipped with three axial solder pins that ensure clear positioning on the circuit board. With a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, it provides an extremely reliable long-term energy solution for safety-critical industrial applications.Highlights at a glanceReverse polarity-proof: Three axial solder pins (3PF) for error-free circuit board assemblyHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely durable: Very low self-discharge of less than 1 % per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for safety-critical electronicsThe Saft LS14500 3PF was specially developed for use in professional electronics where a long-lasting and absolutely reverse-polarity-proof energy source is required. Thanks to the 3-pin configuration, it is ideally suited for board mounting in memory backup systems, real-time clocks (RTC), industrial control units (PLC), meters, and complex sensors where incorrect installation must be ruled out.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage, and has a non-flammable electrolyte. This significantly increases operational safety. The LS14500 3PF is compliant with the IEC 60086-4 safety standard and UL certified, making it ideally suited for demanding applications.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers stable voltage until the end of the discharge cycle. The robust design reliably protects the cell from corrosion and mechanical stresses, thus ensuring the functionality of your application throughout the product's entire service life. Characteristics ModelSaft LS14500 3PF TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection3 radial pins (3PF) RechargeableNo FAQs about the Saft LS14500 3PF lithium round cellWhat does the designation 3PF mean and what is the purpose of the third pin?The designation 3PF means that the battery is equipped with three axial solder pins. Two pins serve as positive and negative terminals. The third pin serves as a mechanical coding. This ensures that the battery can only be mounted in the correct orientation on the circuit board, providing effective reverse polarity protection.Is the Saft LS14500 3PF rechargeable?No, the LS14500 3PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous, damages the cell and can lead to leakage or deflagration.How does the 3PF differ from the 2PF version?Both versions are based on the same powerful LS14500 cell. The difference is in the number of connections. The 3PF version offers mechanical reverse polarity protection due to the additional third pin, which the 2PF version does not have. The choice depends on the safety requirements and circuit board layout of the application.Can this battery be used in normal devices for AA batteries?No, this battery is intended exclusively for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than twice as high as that of a conventional 1.5 V AA battery. In addition, the solder pins prevent the use in standard battery holders.For which applications is this version particularly suitable?The 3PF version is ideal for safety-critical applications where incorrect soldering of the battery could cause serious damage to the electronics. It is often used in high-quality industrial controls, medical devices, and long-life security systems.
The Saft LS14500 3PFRP is a highly specialised lithium thionyl chloride battery (Li-SOCl2) in AA size, developed for reverse polarity-proof and mechanically defined assembly. It is based on the powerful LS14500 cell and is equipped with three axial solder pins in a 180 degree reversed arrangement (Reversed Position). With a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, it offers an extremely reliable long-term energy solution for specific industrial applications.Highlights at a glanceSpecific assembly: 3 axial pins in reversed position (3PFRP) for defined installation orientationsReverse polarity-proof: The 3-pin arrangement excludes faulty solder assemblyHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely durable: Very low self-discharge of under 1% per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyPowerful for specific industrial applicationsThe Saft LS14500 3PFRP was specially developed for use in professional electronics where the PCB layout requires a rotated arrangement of the energy source. Thanks to the specific 3-pin configuration, it is ideal for fixed mounting in memory backup systems, real-time clocks (RTC), industrial control units (PLC), and meters whose layout is precisely matched to this battery version.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy delivery for many years. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and features a non-flammable electrolyte. This significantly increases operational safety. The LS14500 3PFRP complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long lifespan. Compared to other battery technologies, it offers stable voltage levels up to the end of the discharge cycle. The robust construction reliably protects the cell from corrosion and mechanical stress, thus ensuring the functionality of your application throughout the entire product lifespan. Characteristics ModelSaft LS14500 3PFRP TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection3 radial pins (RP) RechargeableNo FAQs about the Saft LS14500 3PFRP lithium round cellWhat does the designation 3PFRP mean?The designation "3PF" stands for three axial solder pins, which ensure reverse polarity protection. The suffix "RP" stands for "Reversed Position" and means that the arrangement of the three pins is rotated 180 degrees compared to the standard 3PF version. This version is mandatory for specific PCB layouts.Is the Saft LS14500 3PFRP rechargeable?No, the LS14500 3PFRP is a lithium primary battery and must under no circumstances be recharged. Any attempt to charge is dangerous, damages the cell and may result in leakage or explosion.Can I replace a 3PFRP version with a normal 3PF version?No, a direct replacement is mechanically not possible. The reversed pin arrangement of the 3PFRP version is coded and only fits PCBs that are exactly designed for this configuration. Please carefully check the requirements of your application or the battery to be replaced.Can this battery be used in regular devices for AA batteries?No, this battery is designed exclusively for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than double that of a conventional 1.5 V AA battery. In addition, the solder pins prevent use in regular battery holders.For which applications is this special version required?The 3PFRP version is used in industrial electronics where the PCB layout requires the battery to be installed in a rotated position, for example to optimise trace routing or save space. It is often used in specific controllers, meters and medical devices.
The Saft LS14500 with axial wire connection is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, factory-assembled with flexible connection wires. This version is based on the powerful LS14500 cell and offers a nominal voltage of 3.6 V and a high capacity of 2.6 Ah. The wire connections enable versatile integration in applications that require a wired energy solution, ensuring a long and reliable operating life.Highlights at a glanceReady for connection: Axial wire connections for flexible and direct wiringHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for flexible industrial applicationsThe Saft LS14500 with axial wire connection was designed for use in professional devices where flexible positioning of the battery in the housing is required. The soldered wires allow easy connection to contacts on the main board without the need to place the battery itself on the board. It is ideal for memory backup systems, alarm systems, counters, localisation systems and industrial control units.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage currents and has a non-flammable electrolyte, which significantly increases operational safety. The LS14500 complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies it offers a stable voltage level until the end of the discharge cycle. The robust design reliably protects the cell against corrosion and mechanical stresses, thus ensuring the functionality of your application throughout the entire product service life. Features ModelSaft LS14500 (axial wire) TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionAxial wire connection RechargeableNo FAQs about the Saft LS14500 with axial wire connectionWhat is the advantage of axial wire connections?Axial wire connections offer maximum flexibility during installation. The battery does not have to sit directly on a board, but can be placed at any suitable location within the device's enclosure and then connected to the electronics via the wires. This is particularly useful when space on the PCB is limited.Is the Saft LS14500 with wires rechargeable?No, this is a lithium primary battery which is not rechargeable. Any attempt to recharge the battery is dangerous and can lead to destruction of the cell, leakage, or deflagration.How does this version differ from a standard LS14500 cell?The battery cell itself is identical to the standard LS14500. The difference lies only in the configuration. This version is factory-supplied with permanently connected axial wires, which eliminates the need for manual soldering during installation and ensures a process-reliable connection.Can this battery be used in standard devices for AA batteries?No, this battery is exclusively designed for professional electronics with an operating voltage of 3.6 V. The voltage is more than twice as high as a standard 1.5 V AA battery. Furthermore, the wires do not allow use in standard battery holders.Can the wires be shortened or lengthened?Yes, the wires can be shortened according to the requirements of your application. Extension is also possible, but should be carried out professionally with suitable connectors or solder joints and appropriate insulation to ensure electrical safety.
The Saft LS17330 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in the compact 2/3 A size, developed for demanding industrial applications with high energy requirements. It offers a nominal voltage of 3.6 V and a high capacity of 2.1 Ah. Thanks to its extremely low self-discharge and robust construction, it’s the ideal choice for long-life applications where maximum reliability and long operating time are required in minimal space.Highlights at a glanceHigh energy density: 2.1 Ah capacity in the compact 2/3 A sizePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of under 1 % per yearReliable: Excellent response even after long storageRobust: Hermetically sealed stainless steel housing for highest operational safetyVersatile: Usable over a wide temperature range from -60 °C to +85 °CPowerful for compact industrial applicationsThe Saft LS17330 is the perfect energy solution for professional and industrial devices where space is limited. Its high energy density makes it the first choice for wireless alarm systems, memory backup systems (memory back up), gas or water meters (metering), professional electronics and tracking systems. Thanks to its ability to provide stable performance even at low temperatures, it ensures your devices work reliably under all conditions.Efficiency and guaranteed safetyProven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage and contains a non-flammable electrolyte, significantly increasing operational safety. The LS17330 is compliant with IEC 60086-4 safety standard and UL certified, confirming its suitability for safety-critical applications.Robust Li-SOCl2 technology for industryLithium thionyl chloride chemistry is synonymous with superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage up to the end of the discharge cycle, even after long storage periods. The robust construction reliably protects the cell from corrosion and environmental influences, ensuring your application functions throughout the entire product life. Features ModelSaft LS17330 TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 A Nominal voltage (V)3.6 Capacity (mAh)2100 Max. continuous discharge current75 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 16.8 x 33.6 Weight (g)approx. 16 ConnectionStandard (industrial cap) RechargeableNo FAQs about the Saft LS17330 lithium round cellWhat does the size 2/3 A mean?The 2/3 A size describes a cell that is shorter than a standard AA battery but has a slightly larger diameter. This compact shape makes a high energy density possible for applications with limited space.Is the Saft LS17330 rechargeable?No, the LS17330 is a lithium primary battery and under no circumstances may it be recharged. Attempting to recharge is dangerous and can result in cell destruction, leakage or an explosion.For which applications is the LS17330 particularly well suited?It is ideal for professional applications with low continuous current that must work reliably for many years and where little space is available. This mainly includes compact sensors, alarm systems, memory backup (memory back up) and GPS trackers.What is the difference to the Saft LS14500?The main difference is in the size and capacity. The LS17330 (2/3 A) is shorter and thicker than the LS14500 (AA). At 2.1 Ah, it offers a slightly lower capacity than the LS14500 (2.6 Ah). The choice depends on the available space and the energy needs of the application.How should the LS17330 be properly disposed of?As a lithium battery, it is subject to special disposal regulations. It must be taken to appropriate municipal collection points or specialist dealers. Disposal as household waste is not permitted.
The Saft LS17500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size A, which was developed for demanding industrial applications with very high energy requirements. It offers a nominal voltage of 3.6 V and an exceptionally high capacity of 3.6 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications where maximum reliability and a long, maintenance-free service life are required.Highlights at a glanceVery high capacity: 3.6 Ah in the A size for maximum runtimePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long periods of storageRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Can be used in a wide temperature range from -60 °C to +85 °CPowerful for energy-intensive applicationsThe Saft LS17500 is the perfect energy solution for professional and industrial devices that require a high amount of energy over a long period of time. Its high capacity makes it the first choice for meters for gas, water or electricity (metering), memory backup systems (memory back up), buoys, tracking systems and industrial control systems. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LS17500 is compliant with the IEC 60086-4 safety standard and UL certified, emphasising its suitability for safety-critical applications.Robust Li-SOCl2 technology for industrial applicationsLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after a long storage period. The robust design reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application over the entire product service life. Characteristics ModelSaft LS17500 TechnologyLithium thionyl chloride (Li-SOCl₂) SizeA Rated voltage (V)3.6 Capacity (mAh)3600 Max. Continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 17.0 x 50.9 Weight (g)approx. 23 ConnectionStandard (industrial head) RechargeableNo FAQs about the Saft LS17500 lithium round cellWhat does size A mean?Size A describes a cell that has the same height as a standard AA battery, but has a larger diameter (approx. 17 mm compared to 14.5 mm). This larger diameter enables a significantly higher capacity.Is the Saft LS17500 rechargeable?No, the LS17500 is a lithium primary battery and must not be charged under any circumstances. Attempted charging is dangerous and can lead to destruction of the cell, leakage or deflagration.For which applications is the LS17500 particularly suitable?It is ideal for professional applications with high energy requirements and low continuous current that need to function independently for many years. These include, in particular, meters (smart metering), long-term data loggers, maritime buoys and sophisticated safety technology.What is the difference to the Saft LS14500?Both cells have the same height, but the LS17500 (size A) is thicker than the LS14500 (size AA). Due to the larger volume, the LS17500 with 3.6 Ah offers a significantly higher capacity than the LS14500 with 2.6 Ah and therefore enables longer runtimes.How should the LS17500 be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be taken to appropriate municipal collection centres or specialist retailers. Disposal with household waste is not permitted.
The Saft LSH14 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size C, specially developed for professional applications with high energy and power requirements. Thanks to its spiral electrode construction, it offers a nominal voltage of 3.6 V, a high capacity of 5.8 Ah, and the ability to deliver exceptionally high continuous and pulse currents. This makes it the ideal choice for demanding devices where fast and high energy output is crucial.Highlights at a GlanceHigh current carrying capacity: Developed for high continuous currents up to 1300 mAHigh capacity: 5.8 Ah for a long-lasting and powerful energy supplyHigh pulse capability: Reliable delivery of pulses up to 2500 mASpiral technology: Optimised for fast energy output with minimal voltage dropWide temperature range: Reliable use from -60 °C to +85 °CRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum Power for Demanding ApplicationsThe Saft LSH14 is the perfect energy solution for devices that require high performance either for short periods or permanently. It is ideally suited for use in emergency transmitters (ELT, EPIRB), military equipment, professional power tools, tracking systems with frequent data transmission, and other industrial applications where standard lithium batteries would reach their performance limits.Superior Spiral Technology for High CurrentsIn contrast to batteries with wound construction (bobbin type), the spiral design of the LSH14 maximises the active electrode surface. This enables a much faster chemical reaction and thus the delivery of significantly higher currents with consistently stable voltage behaviour. This ensures reliable and constant performance for your application even under high load.Efficiency and Guaranteed SafetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage, and has a non-flammable electrolyte, which significantly increases operational safety. The LSH14 conforms to the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with high power requirements. Characteristics ModelSaft LSH14 TechnologyLithium thionyl chloride (high current) SizeC (Baby) Nominal Voltage (V)3.6 Capacity (mAh)5800 Max. continuous discharge current1300 mA Max. pulse current2500 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 51 ConnectionStandard (industrial head) RechargeableNo FAQs about the Saft LSH14 lithium round cellWhat does the suffix "LSH" mean for this battery?The "LSH" designation stands for the High Power series from Saft. These batteries use a spiral electrode design that enables them to deliver significantly higher currents than the "LS" (Low Self-discharge) series, which is designed for long-term applications with low current requirements.What is the main difference to the Saft LS26500?Although both batteries are size C, they are optimised for different purposes. The LSH14 is designed for high power and high current output (e.g. for motors or transmitters). The LS26500 is optimised for an extremely long life with very low current consumption (e.g. for memory back-up).Does the LSH14 have a higher self-discharge rate than an LS battery?Yes, due to the spiral construction with a larger electrode surface, the self-discharge of the LSH series tends to be somewhat higher than that of the LS series. Nevertheless, it offers excellent shelf life and lifespan for a high-performance battery.Which devices is the LSH14 particularly suitable for?It is ideal for devices that require high performance, such as emergency beacons, professional sensors with active transmission, medical devices, security and military technology, and other demanding industrial applications.Is the LSH14 rechargeable?No, the LSH14 is a lithium primary battery and must not under any circumstances be recharged. Any attempt to charge is dangerous and can lead to the destruction of the cell or an explosion.
The Saft LSH14 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size C, which is assembled with U-shaped solder connections for flexible and robust mounting. It combines the spiral-shaped high-performance technology of the LSH series with versatile connection options. With a rated voltage of 3.6 V and a capacity of 5.8 Ah, it is the ideal choice for demanding devices that require high energy output and flexible installation.Highlights at a glanceFlexible mounting: U-shaped solder terminals (LF-U) for versatile installation positionsHigh current carrying capacity: Developed for high continuous currents up to 1300 mAHigh capacity: 5.8 Ah for a long-lasting and powerful energy supplyHigh pulse capacity: Reliable output of pulses up to 2500 mASpiral technology: Optimised for fast energy output with minimal voltage dropRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for demanding applicationsThe Saft LSH14 LF-U was designed for use in professional devices that require high performance and a wired connection. The U-shaped solder connections enable a secure connection using cables. Typical applications include emergency transmitters (ELT, EPIRB), military equipment, professional power tools and industrial applications where the power source cannot be placed directly on the circuit board.Superior spiral technology for high currentsIn contrast to batteries with a wound design (bobbin type), the spiral design of the LSH14 maximises the active electrode surface. This enables a significantly faster chemical reaction and therefore the delivery of much higher currents with stable voltage behaviour. This ensures reliable and constant performance of your application even under high load.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LSH14 LF-U complies with the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with high power requirements. Battery features ModelSaft LSH14 LF-U TechnologyLithium thionyl chloride (high current) SizeC (Baby) Rated voltage (V)3.6 Capacity (mAh)5800 Max. continuous discharge current1300 mA Max. pulse current2500 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 51 ConnectionSolder lug (U-shape) RechargeableNo FAQs about the Saft LSH14 LF-U lithium round cellWhat does the designation LF-U mean?The LF-U labelling describes the type of connections on the battery. "LF" stands for solder connection and the "U" specifies their shape as U-shaped solder lugs. These allow cables to be soldered on or used in certain holders, which offers a high degree of flexibility during installation.What is the main difference to the Saft LS26500?Although both batteries are size C, they are optimised for different purposes. The LSH14 LF-U is designed for high power and high current output thanks to its spiral technology. The LS26500 is optimised for an extremely long service life with very low power consumption.For which applications is this version with solder connections suitable?This version is ideal for high-performance applications where the battery is not mounted directly on a circuit board. It is often used to replace older batteries with soldered cables or in devices that require a flexible, wired connection to the power source.Does the LSH14 have a higher self-discharge rate than an LS battery?Yes, due to the spiral design with a larger electrode surface, the self-discharge of the LSH series tends to be slightly higher than that of the LS series. Nevertheless, it offers excellent shelf life and durability for a high-performance battery.Is the LSH14 LF-U rechargeable?No, the LSH14 LF-U is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous and can lead to the destruction of the cell or to a deflagration.
The Saft LSH14 with Z solder tag is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size C designed for horizontal mounting on printed circuit boards. It combines the spiral-shaped high-performance technology of the LSH series with a flat, space-saving installation. With a nominal voltage of 3.6 V and a capacity of 5.8 Ah, it is the ideal choice for demanding devices that require high energy output and a compact design.Highlights at a glanceFlat mounting: Z-shaped solder tags for horizontal mounting on PCBsHigh current carrying capacity: Designed for continuous currents up to 1300 mAHigh capacity: 5.8 Ah for long-lasting and powerful energy supplyHigh pulse capacity: Reliable output of pulses up to 2500 mASpiral technology: Optimized for fast energy delivery with minimal voltage dropRobust: Hermetically sealed stainless steel body for maximum operational safetyMaximum power for compact applicationsThe Saft LSH14 with Z solder tag was specially developed for use in professional equipment where low height and high performance are decisive. The Z-shaped terminals make it possible to solder the battery horizontally directly onto the PCB. It is ideally suited for emergency transmitters, military equipment and high-performance industrial applications with limited space.Superior spiral technology for high currentsUnlike batteries with a bobbin-type construction, the spiral design of the LSH14 maximizes the active electrode surface. This enables a significantly faster chemical reaction and thus the delivery of much higher currents with simultaneously stable voltage behavior. This ensures reliable and constant performance of your application even under high load.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimize the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LSH14 complies with the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with high power requirements.Features ModelSaft LSH14 (Z solder tag) TechnologyLithium thionyl chloride (high current) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)5800 Max. continuous discharge current1300 mA Max. pulse current2500 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 51 ConnectionZ solder tag RechargeableNo FAQs for Saft LSH14 with Z solder tagWhat is the advantage of a Z solder tag?The Z-shaped solder tag is specially designed for horizontal (flat) mounting of the battery on a PCB. This enables a very low height and is ideal for compact electronic devices where space in height is limited.What is the main difference to the Saft LS26500?Although both batteries have size C, they are optimized for different purposes. The LSH14 is designed for high power and high current output thanks to its spiral technology. The LS26500 is optimized for an extremely long service life with very low power consumption.For which applications is this battery particularly suitable?This version is ideal for all high-performance applications where a long-lasting battery is needed and, at the same time, a very flat design is to be realized. Examples are compact emergency transmitters, flat sensor modules, or high-performance memory modules.Does the LSH14 have a higher self-discharge than an LS battery?Yes, due to the spiral-shaped construction with a larger electrode surface, the self-discharge of the LSH series tends to be somewhat higher than the LS series. Nevertheless, it offers excellent storage properties and lifetime for a high-performance battery.Is the LSH14 with Z solder tag rechargeable?No, it is a lithium primary battery, which is not rechargeable. Any attempt to charge the battery is dangerous and can lead to destruction of the cell or deflagration.
The Tadiran SL-850S is a primary lithium thionyl chloride battery in an extremely compact size 1/2 AA. It was designed for professional electronic applications that require high energy density and reliable long-term performance in the smallest of spaces. With a nominal voltage of 3.6 V and a high capacity of 1.2 Ah, it is a proven energy solution for long-lasting, miniaturised devices. This model is the standard version for use in battery holders.Highlights at a glanceCompact design: High energy density in the miniaturised 1/2 AA size.High capacity: 1.2 Ah for a long and reliable operating time.High rated voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-850S was developed specifically for applications where miniaturisation and a long, maintenance-free service life are crucial. Its primary areas of use include memory backups (RTC, CMOS), security technology, industrial sensors, small medical devices and other professional electronics that rely on a long-lasting power source in a small design.Designed for maximum safety and efficiencyThe safety and longevity of the SL-850S are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, which minimises maintenance costs and reduces the total cost of ownership of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating life. This ensures that the energy is still reliably available even after many years. Battery features ModelTadiran SL-850/S TechnologyLithium thionyl chloride (high current) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current500 mA Max. pulse current1000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran batteryDoes this model have solder terminals or wires?No, the model SL-850S is the standard version with normal battery contacts and is intended for use in a suitable 1/2 AA battery holder. For direct installation, Tadiran also offers variants of this cell type with different solder connections.For which applications is this battery type suitable?This type of battery is ideal for miniaturised electronics that require an extremely long service life. Typical applications include compact wireless sensors, small medical devices, safety technology and memory retention in industrial control systems.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. At the first load, especially with higher currents, it can lead to a short voltage delay. This should be taken into account in the circuit design of the application.What is the shelf life of the battery and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storing in a cool and dry place with low humidity.
The Tadiran SL-2870P is a special lithium thionyl chloride battery in the C (Baby) size, designed for reliable long-term operation in an extended temperature range of up to +125 °C. It combines a very high capacity of 8.5 Ah with the ability to withstand demanding thermal conditions. This version is pre-assembled with an axial lead (pins) for secure and vibration-resistant installation and is ideal for professional industrial and automotive applications.Highlights at a glanceExtended temperature range: Reliable operation from -55 °C to +125 °C.High capacity: 8.5 Ah for very long runtimes in demanding environments.Ready to install: With robust, axial leads for direct and secure solder mounting.High rated voltage: Stable voltage level of 3.6 V even at high temperatures.Maximum longevity: Very low self-discharge and proven long-term stability.Powerful in a wide range of applicationsThe Tadiran SL-2870P was specifically developed for applications whose operating temperature exceeds the limit of standard lithium batteries (+85 °C). Its main applications include automotive electronics (e.g. toll systems, tracking), industrial sensors in demanding production environments, outdoor devices with strong sun exposure and professional security equipment that must function reliably in all climate zones.Designed for increased thermal loadThe exceptional thermal durability of the SL-2870P is based on its special construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is designed to maintain its tightness even at elevated temperatures and repeated temperature cycles. This ensures the highest possible level of safety and reliability over the entire, long service life of the cell.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications. A characteristic feature is the passivation effect: A thin protection layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long shelf and operating life. This version retains its performance and reliability even under thermal conditions that would be critical for standard cells. Features ModelTadiran SL-2870/P TechnologyLithium thionyl chloride (high current) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)8500 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 50 ConnectionAxial lead (P) RechargeableNo FAQs about this Tadiran batteryWhat is the difference between this (+125°C) and a standard (+85°C) Tadiran cell?The key difference is the extended upper operating temperature range of +125 °C compared to +85 °C for standard cells. This is achieved through a special, more heat-resistant internal design and an adjusted chemistry, which guarantees reliable long-term operation in high-heat environments.Do I need this cell or the high temperature series (+130°C)?This cell (up to +125°C) is the ideal and economical choice for most demanding industrial and automotive applications. The high-temperature series (SL-500, up to +130°C) is designed for even more extreme niche applications such as deep drilling in the oil and gas industry ("downhole drilling").What does the "axial lead" connection mean?"Axial lead" is a technical term for connection wires (pins) that exit centrally from the positive and negative terminals of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent solder connection.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may lead to overheating, leaks, or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first load, it can lead to a short voltage delay. This should be taken into account in the circuit design for applications that require power immediately after activation.
The Tadiran SL-860P is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). It was designed for professional applications that require a very high capacity and a long service life. This version is pre-fitted with axial pins for flexible and safe solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is a reliable energy solution for long-life electronic devices.Highlights at a glanceVery high capacity: 2.4 Ah for a maximally extended and self-sufficient operating time.Ready to install: With robust, axial pins for direct and safe soldering.High nominal voltage: Stable voltage level of 3.6 V for almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-860P has been specially developed for long-term applications where the battery is firmly and vibration-proof integrated into electronics. The axial pins allow a fixed integration without a battery holder. Its primary fields of application include memory backups (RTC, CMOS) in industrial controllers (PLC), metering technology (metering for water, gas, electricity), professional security technology and long-life radio sensors.Designed for maximum safety and efficiencyThe safety and service life of the SL-860P are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum, thus enabling extremely long storage and operating capability. This ensures that the energy is still reliably available even after many years. Characteristics ModelTadiran SL-860/P TechnologyLithium thionyl chloride (high current) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 20 ConnectionAxial pins (P) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connecting wires (pins) that exit centrally from the positive and negative poles of the cell. This configuration is designed for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent solder connection.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is soldered in place and extremely long service life is crucial. Typical applications include meters, industrial computers, alarm systems and long-life sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not under any circumstances be recharged. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first use, especially with higher currents, it can cause a short voltage delay. This should be considered in the circuit design of the application.What is the shelf life of the battery and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storing in a cool, dry place with low humidity.
The Saft LS 17330 is a high-performance 3.6-volt lithium primary battery in size 2/3 A, developed for professional and industrial applications with the highest demands for longevity and reliability. Based on superior lithium-thionyl chloride technology (Li-SOCl2), it offers high energy density, extremely low self-discharge, and an unrivalled wide operating temperature range. As a loose cell ("bulk"), it is the ideal energy source for the initial equipment (OEM) of long-lasting and low-maintenance electronic devices.Highlights at a glanceMaximum reliability: Developed for critical long-term applications in measurement technology and for memory buffering.Extreme longevity: Minimal self-discharge of under 1% per year ensures storage and usability for over 10 years.Extremely wide temperature range: Reliable performance under the most extreme conditions from -60°C to +85°C.High energy density: High capacity of 2.1 Ah in a compact design.Stable voltage: High and stable voltage level over almost the entire service life.Reliable energy for critical long-term applicationsThe Saft LS 17330 is the preferred energy source for "fit and forget" applications where battery replacement is not possible or not planned for years. Its main area of application is the supply of smart meters (smart metering for water, gas, electricity), alarm systems, GPS tracking modules (asset tracking) and the backup of memory modules (SRAM/CMOS backup) in critical industrial control systems.Superior lithium-thionyl chloride technologyThe lithium-thionyl chloride technology (Li-SOCl2) is the key to the exceptional performance of this cell. It offers the highest energy density of all primary lithium chemistries. The cells are hermetically sealed and are characterised by a very stable voltage during discharge. The LS series is specially optimised for low continuous currents, making them ideal for stand-alone devices that need to work reliably for many years.Developed for industrial integrationAs a highly specialised single cell, the LS 17330 is optimised for industrial further processing and assembly into battery solutions. Its robust construction and high quality ensure process-safe integration into end devices. Saft offers developers and manufacturers with this cell a reliable and powerful platform for the development of extremely durable and low-maintenance products. Characteristics ModelSaft lithium battery LS 17330 TechnologyLithium-thionyl chloride (Li-SOCl2) Rated voltage (V)3.6 Capacity (mAh)2100 Dimensions (Ø x H in mm)16.5 x 33.4 ConnectionIndustrial cell (flat contact) Weight (g)approx. 17 FAQs about the Saft LS 17330 lithium batteryWhat is the main advantage of the Li-SOCl2 technology?The key advantage is the combination of very high energy density, extremely low self-discharge and a very wide temperature range of use. No other battery technology offers such high reliability over such a long period (often over 10–20 years), making it perfect for sealed, maintenance-free devices.Is this battery rechargeable?No, absolutely not. This is a lithium primary battery. Under no circumstances should it be recharged. Charging attempts are extremely dangerous and can lead to fire or explosion of the cell.What does the size designation "2/3 A" mean?This means that the cell has the same diameter as an A cell, but only about two thirds of its height. This compact design enables use in space-critical applications that require more capacity than a 1/2 AA cell.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal take-back points to ensure proper and environmentally friendly recycling.
The Saft LS26500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size C, developed for demanding industrial applications with very high energy requirements. It offers a nominal voltage of 3.6 V and an exceptionally high capacity of 7.7 Ah. Thanks to its extremely low self-discharge and robust construction, it is the ideal choice for long-life applications where maximum reliability and a long, maintenance-free operating life are required.Highlights at a glanceVery high capacity: 7.7 Ah in the C size for maximum runtimePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of under 1% per yearReliable: Excellent response behaviour even after long storageRobust: Hermetically sealed stainless steel case for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for energy-intensive applicationsThe Saft LS26500 is the perfect energy solution for professional and industrial devices that require a high amount of energy over a long period. Its high capacity makes it the first choice for meters for gas, water or electricity (metering), memory backup systems (memory back up), buoys, tracking systems as well as industrial controls. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage, and features a non-flammable electrolyte which significantly increases operational safety. The LS26500 complies with safety standard IEC 60086-4 as well as being UL certified and thus demonstrates its suitability for safety-critical applications.Robust Li-SOCl2 technology for industryLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage right up to the end of the discharge cycle, even after long periods of storage. The robust construction protects the cell reliably against corrosion and environmental influences, ensuring the functionality of your application over the entire product lifetime. Characteristics ModelSaft LS26500 TechnologyLithium Thionyl Chloride (Li-SOCl₂) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)7700 Max. continuous discharge current150 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.0 x 50.0 Weight (g)approx. 48 ConnectionStandard (industrial head) RechargeableNo FAQs about the Saft LS26500 lithium round cellWhat does the size C mean?The C size describes a cell that has the same height as a standard AA battery but has a larger diameter (approx. 26 mm compared to 14.5 mm). This larger diameter allows a significantly higher capacity.Is the Saft LS26500 rechargeable?No, the LS26500 is a lithium primary battery and must never be recharged under any circumstances. Any attempt to charge is dangerous and can lead to cell destruction, leakage, or bursting.For which applications is the LS26500 particularly suitable?It is optimal for professional applications with high energy requirements and low continuous current that must operate autonomously for many years. These include in particular meters (smart metering), long-term data loggers, maritime buoys and demanding security technology.What is the difference to the Saft LS17500?Both cells have the same height, but the LS26500 (size C) is thicker than the LS17500 (size A). Due to the larger volume, the LS26500, with 7.7 Ah, offers a much higher capacity than the LS17500, with 3.6 Ah, and enables longer runtimes.How must the LS26500 be correctly disposed of?As a lithium battery, it is subject to special disposal regulations. It must be handed in to the relevant municipal collection points or specialist dealers. Disposal with household waste is not permitted.
The Saft LS26500PLUS is a highly specialised lithium thionyl chloride battery (Li-SOCl2) of the C-class, developed specifically for demanding applications with high pulse current requirements. It combines a very high nominal voltage of 3.6 V and an exceptional capacity of 8.5 Ah with the ability to reliably deliver high current pulses. This makes it the ideal energy source for long-life applications that require periodic high peak loads in addition to a low base current.Highlights at a glanceOptimised for pulse loads: Ideal for applications with high peak current requirements, such as radio modulesVery high capacity: 8.5 Ah for maximum runtime and energy densityHigh pulse capability: Reliable delivery of high current pulses (up to 2 A)Minimal voltage drop: Low voltage drop even with high loadsExtremely long-lasting: Low self-discharge for a long shelf life and operating timeRobust: Hermetically sealed stainless steel housing for maximum operational safetyPowerful for modern wireless and tracking applicationsThe Saft LS26500PLUS was specifically developed for use in professional devices that use transmission pulses for data transfer. It is ideally suited for smart metering (electricity, gas, water meters with radio module), asset tracking, industrial IoT sensors, alarm systems and other applications that require long autonomous operating times along with high peak current needs.Optimised technology for pulse applicationsThe proven lithium thionyl chloride technology of the PLUS series has been specially developed for the requirements of modern electronics. The internal construction of the cell minimises the voltage drop during high current pulses (passivation effect), ensuring stable and reliable device operation throughout the entire lifecycle. This guarantees maximum efficiency and data transmission security.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and contains a non-flammable electrolyte. This significantly increases operational safety. The LS26500PLUS meets the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications. Features ModelSaft LS26500 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)7700 Max. continuous discharge current150 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.0 x 50.0 Weight (g)approx. 48 ConnectionStandard (industrial head) RechargeableNo FAQs about the Saft LS26500PLUS lithium round cellWhat does the "PLUS" designation mean for this battery?The "PLUS" designation indicates the special suitability of this Saft battery series for applications with high pulse current requirements. Compared to the standard series, the PLUS series can supply significantly higher currents for short periods, which is essential for devices with radio or transmission modules.What is the difference from the standard Saft LS26500?The LS26500PLUS offers a higher capacity of 8.5 Ah than the standard LS26500 (7.7 Ah). However, the key difference is its optimised ability to handle high current pulses with a lower voltage drop, ensuring reliability in wireless applications.For which devices is the LS26500PLUS particularly suitable?It is optimal for all professional devices that operate at low current for long periods of time but periodically require high currents to transmit data. Examples include smart meters, GPS trackers, industrial wireless sensors and security systems with transmission module.Is the LS26500PLUS rechargeable?No, this is a lithium primary battery, which is not rechargeable. Any attempt to charge the battery is dangerous and may result in cell destruction, leakage or explosion.How should the LS26500PLUS be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be taken to appropriate municipal collection points or specialist retailers. Disposal via household waste is not permitted.
The Saft LSH20 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, developed for the most demanding industrial applications with maximum energy and power requirements. Thanks to its spiral electrode design, it offers a nominal voltage of 3.6 V, an exceptionally high capacity of 13.0 Ah and the ability to deliver extremely high continuous and pulse currents. This makes it the ultimate choice for critical applications where maximum performance and reliability are required.Highlights at a glanceMaximum power: Developed for the highest continuous currents up to 1800 mAExtremely high capacity: 13.0 Ah in the D size for maximum runtime under loadHighest pulse capability: Reliable delivery of pulses up to 4000 mA (4 A)Spiral technology: Optimised for fast energy output with minimal voltage dipWide temperature range: Reliably usable from -60 °C to +85 °CRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for critical applicationsThe Saft LSH20 is the perfect energy solution for devices that require very high performance over a long period. It is ideal for use in emergency transmitters (ELT, EPIRB), military equipment such as radios, professional power tools, underwater applications, as support energy for high-performance backup systems, and in other industrial applications where no compromises can be made in terms of performance.Superior spiral technology for highest currentsIn contrast to batteries with bobbin-type construction, the spiral design of the LSH20 maximises the active electrode surface. This enables a significantly faster chemical reaction and thus the delivery of extremely high currents with stable voltage behaviour at the same time. This ensures reliable and constant performance of your application even under the highest load.Efficiency and guaranteed safetyThe cell is hermetically sealed by means of a glass-to-metal seal to minimise the risk of leakage current and features a non-flammable electrolyte, which significantly increases operational safety. The LSH20 complies with the IEC 60086-4 safety standard as well as being UL certified and is therefore suitable for safety-critical applications with the highest performance requirements. Features ModelSaft LSH20 TechnologyLithium thionyl chloride (high current) SizeD (Mono) Nominal voltage (V)3.6 Capacity (mAh)13000 Max. continuous discharge current1800 mA Max. pulse current4000 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 100 ConnectionStandard (Industrial head) RechargeableNo FAQs about the Saft LSH20 lithium round cellWhat does the suffix "LSH" mean for this battery?The designation "LSH" stands for the High Power series by Saft. These batteries use a spiral electrode design that enables them to deliver significantly higher currents than the "LS" (Low Self-discharge) series, which is designed for long-term applications with low power requirements.What is the main difference to the Saft LS33600?Although both batteries are size D, they are optimised for opposing purposes. The LSH20 is designed for maximum performance and extremely high current output (e.g. for motors or powerful transmitters) and has a capacity of 13.0 Ah. The LS33600 is optimised for an extremely long service life with very low power consumption and therefore offers a higher capacity of 17.0 Ah.Does the LSH20 have a higher self-discharge rate than an LS battery?Yes, due to the spiral construction with a larger electrode surface, the self-discharge of the LSH series is generally somewhat higher than that of the LS series. Nevertheless, it offers excellent storage capability and service life for a high-performance battery.For which devices is the LSH20 particularly suitable?It is ideal for devices that require the highest possible performance from a primary cell. These include emergency beacons, professional dive computers, military communications technology, geophysical measuring instruments and other demanding industrial applications.Is the LSH20 rechargeable?No, the LSH20 is a lithium primary battery and must never be recharged under any circumstances. Any attempt to recharge is dangerous and can lead to destruction of the cell or to an explosion.
The Saft LSH20 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, which is assembled with U-shaped solder connections for flexible and robust installation. It combines the spiral-shaped high-performance technology of the LSH series with versatile connection options. With a rated voltage of 3.6 V and a very high capacity of 13.0 Ah, it is the ideal choice for demanding devices that require extremely high energy output and flexible installation.Highlights at a glanceFlexible mounting: U-shaped solder terminals (LF-U) for versatile installation positionsMaximum power: Developed for the highest continuous currents up to 1800 mAExtremely high capacity: 13.0 Ah in the D size for maximum runtime under loadHighest pulse capacity: Reliable output of pulses up to 4000 mA (4 A)Spiral technology: Optimised for fast energy output with minimal voltage dropRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for critical applicationsThe Saft LSH20 LF-U was designed for use in professional devices that require maximum power and a wired connection. The U-shaped solder connections enable a secure connection using cables. Typical applications include emergency transmitters (ELT, EPIRB), military equipment, professional power tools and industrial applications where the power source cannot be placed directly on the circuit board.Superior spiral technology for maximum currentsIn contrast to batteries with a wound design (bobbin type), the spiral design of the LSH20 maximises the active electrode surface. This enables a significantly faster chemical reaction and therefore the delivery of extremely high currents with stable voltage behaviour. This ensures reliable and constant performance of your application even under the highest load.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LSH20 LF-U conforms to the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with the highest power requirements.Characteristics ModelSaft LSH20 LF-U TechnologyLithium thionyl chloride (high current) SizeD (mono) Nominal voltage (V)3.6 Capacity (mAh)13000 Max. continuous discharge current1800 mA Max. pulse current4000 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 100 ConnectionSolder tag (U-shape) RechargeableNo FAQs on the Saft LSH20 LF-U lithium round cellWhat does the designation LF-U mean?The LF-U labelling describes the type of connections on the battery. "LF" stands for solder connection and the "U" specifies their shape as U-shaped solder lugs. These allow cables to be soldered on or used in certain holders, which offers a high degree of flexibility during installation.What is the main difference to the Saft LS33600?Although both batteries are size D, they are optimised for opposing purposes. The LSH20 LF-U is designed for maximum power and extremely high current output. The LS33600 is optimised for an extremely long service life with very low power consumption and offers a higher capacity.For which applications is this version with solder terminals suitable?This version is ideal for high-performance applications where the battery does not sit directly on a circuit board. It is often used to replace older batteries with soldered cables or in devices that require a flexible, wired connection to the power source.Does the LSH20 have a higher self-discharge rate than an LS battery?Yes, due to the spiral design with a larger electrode surface, the self-discharge of the LSH series tends to be slightly higher than that of the LS series. Nevertheless, it offers excellent shelf life and durability for a high-performance battery.Is the LSH20 LF-U rechargeable?No, the LSH20 LF-U is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous and can lead to the destruction of the cell or to a deflagration.
The Saft LSH20 with Z solder tag is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, designed for horizontal mounting on printed circuit boards. It combines the spiral-shaped high-performance technology of the LSH series with a flat, space-saving installation. With a nominal voltage of 3.6 V and a very high capacity of 13.0 Ah, it is the ideal choice for demanding devices that require an extremely high energy output and a compact design.Highlights at a glanceFlat mounting: Z-shaped solder terminals for horizontal PCB mountingMaximum power: Developed for highest continuous currents up to 1800 mAExtremely high capacity: 13.0 Ah in the D size for maximum runtime under loadHighest pulse capacity: Reliable delivery of pulses up to 4000 mA (4 A)Spiral technology: Optimised for fast energy output with minimal voltage dropRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for compact applicationsThe Saft LSH20 with Z solder tag was specially developed for use in professional devices where a low height and extremely high performance are crucial. The Z-shaped connections allow the battery to be soldered horizontally directly onto the circuit board. It is ideal for emergency transmitters, military equipment and high-performance industrial applications with limited installation space.Superior spiral technology for maximum currentsIn contrast to batteries with a wound design (bobbin type), the spiral design of the LSH20 maximises the active electrode surface. This enables a significantly faster chemical reaction and therefore the delivery of extremely high currents with stable voltage behaviour. This ensures reliable and constant performance of your application even under the highest load.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LSH20 conforms to the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with the highest power requirements. Battery features ModelSaft LSH20 (Z solder tag) TechnologyLithium thionyl chloride (high current) SizeD (mono) Rated voltage (V)3.6 Capacity (mAh)13000 Max. continuous discharge current1800 mA Max. pulse current4000 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 100 ConnectionZ solder tag RechargeableNo FAQs about the Saft LSH20 with Z solder tagWhat is the advantage of a Z solder tag?The Z-shaped solder tag is specially designed for horizontal (flat) mounting of the battery on a printed circuit board. This enables a very low installation height and is ideal for compact electronic devices where vertical installation space is limited.What is the main difference to the Saft LS33600?Although both batteries are size D, they are optimised for opposing purposes. The LSH20 is designed for maximum power and extremely high current output. The LS33600 is optimised for an extremely long service life with very low power consumption and offers a higher capacity.For which applications is this battery particularly suitable?This version is optimal for all high-performance applications where a long-life battery is required and a very flat design is needed at the same time. Examples are compact emergency transmitters, flat sensor modules, or high-performance memory modules.Does the LSH20 have a higher self-discharge rate than an LS battery?Yes, due to the spiral-shaped design with a larger electrode surface, the self-discharge of the LSH series tends to be slightly higher than that of the LS series. Nevertheless, it offers excellent shelf life and durability for a high-performance battery.Is the LSH20 with Z solder tag rechargeable?No, this is a lithium primary battery, which is not rechargeable. Any attempt to recharge the battery is dangerous and may result in destruction of the cell or deflagration.
The Saft LS33600 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, which was developed for demanding industrial applications with maximum energy requirements. It offers a nominal voltage of 3.6 V and an exceptionally high capacity of 17.0 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications where maximum reliability and decades of maintenance-free operation are required.Highlights at a glanceMaximum capacity: 17.0 Ah in the D size for an extremely long runtimePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long periods of storageRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Can be used in a wide temperature range from -60 °C to +85 °CPowerful for energy-intensive long-term applicationsThe Saft LS33600 is the perfect energy solution for professional and industrial devices that require a very high amount of energy autonomously over many years. Its outstanding capacity makes it the first choice for gas, water or electricity meters (metering), memory backup systems (memory back up) for critical infrastructure, maritime buoys, seismic sensors and sophisticated tracking systems.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LS33600 is compliant with the IEC 60086-4 safety standard and UL certified, emphasising its suitability for safety-critical applications.Robust Li-SOCl2 technology for industryLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after a long storage period. The robust design reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application over the entire product service life. Characteristics ModelSaft LS33600 TechnologyLithium thionyl chloride (Li-SOCl₂) SizeD (mono) Rated voltage (V)3.6 Capacity (mAh)17000 Max. continuous discharge current200 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 90 ConnectionStandard (industrial head) RechargeableNo FAQs about the Saft LS33600 lithium round cellWhat does size D mean?Size D, also known as a mono cell, is one of the largest standard sizes for round cells. Its large volume enables a very high capacity, making it ideal for applications that require an extremely long runtime without battery replacement.Is the Saft LS33600 rechargeable?No, the LS33600 is a lithium primary battery and must not be charged under any circumstances. Attempted charging is dangerous and can lead to destruction of the cell, leakage or deflagration.For which applications is the LS33600 particularly suitable?It is ideal for professional applications with very high energy requirements and low continuous current that need to function independently for decades. These primarily include smart metering gateways, long-term data loggers, buoys, pipeline monitoring systems and other low-maintenance industrial applications.What is the difference to the Saft LS26500?The main difference lies in the size and capacity. The LS33600 (size D) is both taller and thicker than the LS26500 (size C). As a result, at 17.0 Ah, the LS33600 offers more than twice the capacity of the LS26500 (7.7 Ah) and therefore enables considerably longer operating times.How should the LS33600 be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be disposed of at appropriate municipal collection centres or specialist retailers. Disposal with household waste is not permitted.
The Tadiran SL-350T from the iXtra series is a primary lithium thionyl chloride battery in the extremely compact size 1/2 AA. It was specially developed for miniaturised applications that require a long service life in combination with moderate current load capability. This version comes equipped with solder tags (LF-U) for direct and secure mounting to PCBs. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it is the ideal energy solution for professional, space-constrained electronics.Highlights at a glanceCompact and powerful: Optimised for moderate loads in the miniaturised 1/2 AA size.For PCB mounting: Pre-equipped with solder tags for direct installation.High capacity: 1.2 Ah for long operating times in small devices.High nominal voltage: Stable voltage level of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-350T was specifically developed for applications where both miniaturisation and enhanced power output are crucial. The solder tabs allow firm and permanent integration into the circuitry. Its primary use cases include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices, and other professional electronics that require regular transmission pulses in minimal space.Designed for maximum safety and efficiencySafety and longevity of the SL-350T are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable, ensuring a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over very long periods, reducing maintenance costs and lowering the total operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for the lowest continuous currents, the SL-300 series demonstrates better performance for medium load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in more stable energy delivery in applications that regularly "wake up" to perform tasks. Features ModelTadiran SL-350/T TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current60 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionSolder tag (T) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with solder tags mean?This model is equipped with metal contacts, called solder tags, which can be soldered directly to a printed circuit board (PCB) for simple and permanently secure attachment. This provides excellent mechanical and electrical connections without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate power requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for maximum long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This type of battery is ideal for miniaturised electronics where the battery is directly soldered and long service life with regular power requirements is essential. Examples include compact wireless sensors, small medical devices, and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer is broken down faster and with less voltage drop under load than with the SL-700 series, which is an advantage for applications with regular current pulses.
The Tadiran SL-350PR from the iXtra series is a primary lithium thionyl chloride battery in the extremely compact 1/2 AA size. It was specially developed for miniaturised applications that require long life in combination with moderate current capability. This version is pre-assembled with radial pins for a specific and secure mounting on PCBs. With 3.6 V nominal voltage and 1.2 Ah capacity, it is the ideal energy solution for professional, space-critical electronics.Highlights at a glanceFor PCB mounting: Pre-assembled with radial pins for direct installation.Compact and powerful: Optimised for moderate loads in the miniaturised 1/2 AA size.High capacity: 1.2 Ah for long runtimes in small devices.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-350PR was specifically developed for applications where both miniaturisation and improved performance are essential. The radial pins enable a specific and space-saving arrangement on the PCB. Its primary areas of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular transmission pulses in the smallest spaces.Designed for maximum safety and efficiencyThe safety and durability of the SL-350PR are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and delivers a high level of intrinsic safety. Each cell is designed to consistently and safely deliver its energy over a very long period, which minimises maintenance costs and lowers the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series performs better under medium load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable energy supply for applications that regularly "wake up" to perform tasks. Characteristics ModelTadiran SL-350/PR TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current60 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran batteryWhat does connection with "radial pins" mean?In contrast to axial connections, which emerge centrally from the poles, radial pins are arranged so that they exit from one end face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate power requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for long-term use with minimal continuous current, such as for pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics where the battery is permanently soldered in and a long service life with regular power demand is essential. Example applications include compact wireless sensors, small medical devices and GPS trackers with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage, or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. The iXtra series is designed such that this layer is broken down more quickly under load and with less voltage drop than the SL-700 series, which is advantageous for applications with regular current pulses.
The Tadiran SL-350PT is a specialised primary battery based on lithium thionyl chloride ($Li-SOCl_{2}$), which is known for its extreme longevity and reliability. With its compact 1/2 AA design and a nominal voltage of 3.6 V it is the standard solution for industrial applications that require a constant power supply over many years with minimal self-discharge.This specific version has 3 PCB contacts (pins) in the configuration +1 / -2. This means that it has a positive pin on one side and two negative pins on the other side. This arrangement ensures reverse polarity protection and mechanically extremely stable mounting directly on the circuit board (PCB).Highlights at a glanceEnormous energy density: Despite its small size, offers a capacity of 1.2 Ah, ideal for long-life electronic components.Extreme shelf life: Thanks to minimal self-discharge (less than 1% per year at room temperature), a service life of up to 10-20 years possible.Wide temperature range: Works reliably under extreme conditions from -55°C to +85°C, which makes them ideal for outdoor applications.Stable discharge voltage: The voltage remains almost constant at a high level over almost the entire discharge time.Safe PCB mounting: The 3-pin configuration (+1/-2) enables vibration-proof soldering on boards and prevents assembly errors.Hermetically sealed: The housing is laser-sealed to prevent leakage and to protect the sensitive chemistry from environmental influences.Areas of applicationIndustrial controls (PLC)Used as a backup battery for data backup (RAM/RTC) in control systems from Siemens, ABB or Fanuc.Consumption meter (Metering)Used in smart gas, water, or electricity meters that must operate for more than a decade without battery replacement.Safety technologyPower supply for sensors, alarm systems, and surveillance devices in remote or difficult-to-access areas.Assembly & safety instructionsSoldering processWhen soldering to the PCB, the heat exposure should be kept as short as possible (max. 5 seconds at 260°C) to avoid damaging the internal seals of the battery.No rechargeThis is a primary battery. Attempting to charge it may result in explosions, fires, or the release of toxic gases.StorageStore the batteries in a cool and dry place. Avoid contact between the pins themselves or with conductive surfaces to prevent short circuits. Features ModelTadiran SL-350PT (1/2 AA) Chemical compositionLithium-thionyl chloride (**Li-SOCl2**) Rated voltage**3.6 V** Nominal capacity**1.2 Ah** (1200 mAh) Connection type**Solder tags (PT)** for PCB mounting Operating temperature**-55°C to +85°C** DimensionsØ 14.7 mm x 25.2 mm (1/2 AA) Max. continuous discharge current6 mA Special featureNot rechargeable (primary cell) FAQs about the Tadiran SL-350PTWhy does the battery have two negative pins?For mechanical stability and reverse polarity protection. The two negative pins, together with the offset positive pin, form a triangular pattern on the PCB. This ensures that the battery can only be inserted in one direction, and it remains firmly in place even in case of vibrations.Can I replace the SL-350PT with a standard 1/2 AA battery?Only if the pin configuration is identical. There are 1/2 AA batteries with axial wires, simple solder tags or flat terminals. The replacement must have the grid dimensions and the pin layout of the SL-350PT (+1/-2) for fitting on the PCB.What does the "passivation effect" mean?A protective mechanism in lithium batteries. During long-term storage, a thin protective layer forms on the anode. This prevents self-discharge. When first used, the voltage may briefly drop slightly until the layer is removed by the flow of current.
The Tadiran SL-350P from the iXtra Series is a primary lithium thionyl chloride battery in the extremely compact 1/2 AA size. This special version is pre-assembled with robust axial connection wires, which allows flexible and safe installation by direct soldering. It was developed for miniaturised applications that combine a long lifetime with moderate current load capacity. With 3.6 V nominal voltage and a high capacity of 1.2 Ah, it is the ideal energy solution for professional electronics.Highlights at a glanceReady to install: With robust, axial wires for direct and safe soldering installation.Compact and powerful: Optimised for moderate loads in the miniaturised 1/2 AA size.High capacity: 1.2 Ah for long runtimes in small devices.High rated voltage: Stable voltage of 3.6 V over almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-350P has been specially developed for applications where both miniaturisation and improved power output are essential. The axial wires allow a secure and vibration-resistant integration without a battery holder. Its primary applications include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular transmission pulses in a confined space.Designed for maximum safety and efficiencyThe safety and longevity of the SL-350P are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period of time, reducing maintenance costs and lowering the total operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra Series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), optimised for minimal continuous currents, the SL-300 Series shows better behaviour for medium load demands and pulse currents. The passivation effect is overcome faster, resulting in a more stable power supply in applications that regularly "wake up" to perform tasks.Characteristics ModelTadiran SL-350/P TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current60 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionAxial wires (P) RechargeableNo FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires that emerge centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration allows very flexible assembly and a direct, firm connection to the electronics by soldering, without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics that require a long service life and where the cell is firmly soldered. Examples include compact wireless sensors, small medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and under no circumstances may it be recharged. Attempting to charge the cell is dangerous and may lead to overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra Series is designed so that this layer is broken down more quickly and with less voltage drop under load than in the SL-700 Series, which is beneficial for applications with regular current pulses.
The Tadiran SL-360S from the iXtra Series is a primary lithium thionyl chloride battery in the size AA (Mignon). It has been specially developed for applications that require a long service life in combination with moderate current capacity. With a high nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics that regularly require moderate current pulses. This model is the standard version for use in battery holders.Highlights at a glanceOptimised for moderate loads: High capacity and stable voltage even with moderate current requirements.Very high capacity: 2.4 Ah for a maximum extended and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V for almost the entire lifetime.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360S was specifically developed for applications where longevity and improved performance output are crucial. Its primary uses include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers, as well as industrial counters and measuring instruments (metering) that regularly transmit data. It is the ideal choice for all devices that operate independently for years and periodically require power for transmission or measurement operations.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360S is based on proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to supply its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra Series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series offers better performance with moderate load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply for applications that regularly "wake up" to perform tasks. Characteristics ModelTadiran SL-360/S TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran batteryWhat is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate current requirements (e.g. wireless sensors). It provides more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory back-up applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require long service life but regularly need power for functions such as sending data. Examples include wireless alarm systems, GPS trackers, data loggers and industrial wireless sensors.Does this model have solder terminals or wires?No, the model SL-360S is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers versions of this cell type with various solder terminals.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface which minimises self-discharge. The iXtra Series is designed so that this layer breaks down more quickly and with less voltage drop under load than with the SL-700 Series, which is advantageous for applications with regular current pulses.
The Tadiran SL-360T from the iXtra series is a primary lithium-thionyl chloride battery in the widely used AA (Mignon) size. It was specially developed for applications requiring a long service life in combination with moderate current carrying capacity. This version is pre-configured with solder tags (LF-U) for direct and secure mounting onto PCBs. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics that require regular power consumption.Highlights at a glanceOptimised for moderate loads: High capacity and stable voltage even for moderate current requirements.For PCB assembly: Pre-configured with solder tags for direct installation.Very high capacity: 2.4 Ah for maximally extended and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360T was specifically developed for applications where longevity and improved power output are crucial. The solder tags allow for a firm and permanent integration into the circuitry. Its primary areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial meters and measuring instruments (metering) that transmit data regularly.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-360T are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable, providing a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, which minimises maintenance costs and reduces the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide enhanced voltage stability under load. Compared to the standard series (SL-700), which is optimised for ultra-low continuous currents, the SL-300 series demonstrates superior performance under moderate load requirements and pulse currents. This overcomes the passivation effect more quickly, resulting in more reliable energy delivery for applications that regularly “wake up” to perform tasks. Features ModelTadiran SL-360/T TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionSolder tag (T) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with solder tags mean?This model is equipped with metal contacts, known as solder tags, which allow easy and permanently secure attachment directly to a printed circuit board (PCB). This ensures excellent mechanical and electrical connection without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate current demand (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, however, is designed for absolute long-term use with the lowest possible continuous current, such as for pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics where the battery is soldered in place and a long service life with regular power demand is essential. Examples include wireless alarm systems, GPS trackers, and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer is reduced more quickly under load and with less voltage drop than with the SL-700 series, making it advantageous for applications with regular current pulses.
The Tadiran SL-360PR from the iXtra series is a primary lithium thionyl chloride battery in the widely used AA (Mignon) format. It was specially developed for applications requiring a long service life combined with moderate current capacity. This version is pre-fitted with radial pins for specific and safe mounting on PCBs. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it offers the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceFor PCB mounting: Pre-fitted with radial pins for direct installation.Optimised for moderate loads: High capacity and stable voltage even with moderate current demand.Very high capacity: 2.4 Ah for maximally extended and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V throughout nearly its entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PR was purpose-designed for applications where a long service life and improved power performance are crucial. The radial pins enable specific and space-saving placement on the PCB. Its main fields of application include wireless alarm and security systems, GPS tracking modules, professional two-way radios, data loggers as well as industrial meters and measuring devices (metering) that regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PR are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal, which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of inherent safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra series: The technology for higher performanceThe Tadiran iXtra series is designed to provide enhanced voltage stability under load. Compared to the standard series (SL-700), which is optimised for ultra-low continuous current, the SL-300 series performs better for medium load requirements and pulse currents. As a result, the passivation effect is impressed more quickly, delivering a more stable power supply in applications that "wake up" regularly to perform tasks. Features ModelTadiran SL-360/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran batteryWhat does connection with "radial pins" mean?In contrast to axial connections, which exit centrally from the poles, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific PCB layouts and ensures particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers a more stable voltage under load. In contrast, the SL-700 series is designed for absolute long-term use with minimal continuous current, such as in pure memory-backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered in and a long service life with regular current demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can cause overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage loss under load than in the SL-700 series, which is advantageous for applications with regular current pulses.
The Tadiran SL-360PT from the iXtra series is a primary lithium thionyl chloride battery in the widely used size AA (Mignon). It was specially developed for applications requiring a long service life in combination with a moderate current load capacity. This version comes pre-assembled with axial pins for flexible and secure solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceReady to install: With robust, axial pins for direct solder mounting.Optimised for moderate loads: High capacity and stable voltage even with medium current demand.Very high capacity: 2.4 Ah for maximised and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PT was specifically developed for applications in which longevity and improved power delivery are crucial. The axial pins enable fixed and vibration-proof integration without a battery holder. Main areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial counters and measuring instruments (metering) that transmit data regularly.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PT are based on Tadiran's proven design. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces total operating costs for your application.iXtra series: The technology for higher performanceTadiran's iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better performance with moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply in applications which regularly "wake up" to perform tasks. Features ModelTadiran SL-360/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial pins (PT) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative ends of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and long-lasting solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is permanently soldered and a long service life with regular power demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.
The Tadiran SL-360P from the iXtra series is a primary lithium-thionyl chloride battery in the AA (Mignon) size. This special version is pre-configured with robust axial connection wires, enabling flexible and secure installation by direct soldering. It was designed for applications combining long lifetime with moderate current-carrying capability. With 3.6 V nominal voltage and a very high capacity of 2.4 Ah, it is the ideal power solution for professional electronics that regularly require moderate current pulses.Highlights at a glanceReady to install: With robust, axial wires for direct and safe soldering installation.Optimised for moderate loads: High capacity and stable voltage even at medium current demand.Very high capacity: 2.4 Ah for maximum extended and autonomous operating duration.High nominal voltage: Stable voltage level of 3.6 V over almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-360P was specifically developed for applications where longevity and improved power delivery are crucial. The axial wires enable secure and vibration-proof integration without a battery holder. Its main areas of application include wireless alarm and security systems, GPS tracking modules, professional radio devices, data loggers as well as industrial counters and measuring instruments (metering), which regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360P are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, thus minimising maintenance costs and reducing the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimum continuous currents, the SL-300 series shows improved performance with medium load requirements and pulse currents. The passivation effect is thereby more quickly overcome, leading to a more stable power supply in applications which regularly "wake up" to perform tasks.Features ModelTadiran SL-360/P TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial wires (P) RechargeableNo FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires that exit centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration allows for very flexible installation and direct, firm connection to the electronics by soldering, without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require a long service life, but regularly need power for functions such as data transmission. The axial wires make it perfect for installations where the cell must be firmly soldered.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is dangerous and may result in overheating, leakage, or the cell bursting.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer is broken down more quickly and with less voltage drop under load than with the SL-700 series, which is advantageous for applications with regular current pulses.
The Tadiran SL-361T from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA format. It was specially developed for applications that require a long service life combined with moderate current capacity. This variant comes with solder tabs (LF-U) pre-configured for direct and safe mounting on PCBs. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal power solution for professional miniaturised electronics.Highlights at a glanceCompact and powerful: Optimised for moderate loads in the compact 2/3 AA format.For PCB mounting: Pre-configured with solder tabs for direct installation.High capacity: 1.6 Ah for long runtimes in compact devices.High nominal voltage: Stable voltage of 3.6 V over almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-361T was specifically developed for applications where both miniaturisation and improved power output are critical. The solder tabs enable a reliable and permanent integration into the circuit. Its primary fields of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices, and other professional electronics that require regular transmission pulses in the smallest of spaces.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361T are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.iXtra series: The technology for higher performanceThe Tadiran iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better behaviour under moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable energy supply in applications that regularly "wake up" to perform tasks.Features ModelTadiran SL-361/T TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionSolder tab (T) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with solder tabs mean?This model is equipped with metal contacts known as solder tabs, which can be soldered directly onto a printed circuit board (PCB) for easy and permanently secure fastening. This ensures excellent mechanical and electrical connection without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with very low continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics, where the battery is permanently soldered and long service life with regular current demand is crucial. Examples are compact wireless sensors, small medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After extended storage, a protective layer forms on the lithium surface that minimises self-discharge. The iXtra series is designed so that this layer is broken down faster and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.
The Tadiran SL-361PR from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA format. It was specially developed for applications requiring a long service life in combination with moderate current capacity. This version comes pre-configured with radial pins for specific and secure mounting on PCBs. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal energy solution for professional, miniaturised electronics.Highlights at a glanceFor PCB mounting: Pre-configured with radial pins for direct installation.Compact and powerful: Optimised for moderate loads in the compact 2/3 AA size.High capacity: 1.6 Ah for long runtimes in compact devices.High rated voltage: Stable voltage of 3.6 V throughout almost the entire operating life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a variety of applicationsThe Tadiran SL-361PR was specifically developed for applications where both miniaturisation and enhanced power delivery are crucial. The radial pins allow specific and space-saving arrangement on the PCB. Its main areas of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring equipment, and other professional electronics that require regular transmission pulses in extremely small formats.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361PR are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period of time, reducing maintenance costs and lowering the total operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for very low continuous currents, the SL-300 series behaves better with moderate load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in more stable power in applications that regularly "wake up" to perform tasks. Specifications ModelTadiran SL-361/PR TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit centrally from the terminals, radial pins are arranged so that they leave from one face of the battery. This configuration is optimised for specific PCB (printed circuit board) layouts and enables particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with the lowest continuous current, such as memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics where the battery is soldered in place and a long service life with regular power requirements is crucial. Examples include compact wireless sensors, small medical devices, and GPS trackers with special PCB designs.Is this battery rechargeable?No, this is a primary lithium battery and must never be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leaks, or bursting of the cell.What does the passivation effect mean in this battery?After long storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is constructed so that this layer is reduced under load faster and with lower voltage drop than in the SL-700 series, which is beneficial for applications with regular current pulses.
The Tadiran SL-361PT from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA format. It was specially developed for applications that require a long service life in combination with moderate current-carrying capacity. This version is pre-assembled with axial pins for flexible and secure soldering assembly. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal energy solution for professional, miniaturised electronics.Highlights at a glanceReady to install: With robust, axial pins for direct soldering assembly.Compact and powerful: Optimised for moderate loads in the compact 2/3 AA format.High capacity: 1.6 Ah for long runtimes in compact devices.High rated voltage: Stable voltage position of 3.6 V for almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-361PT was specifically developed for applications where both miniaturisation and enhanced power output are essential. The axial pins allow for solid and vibration-resistant integration without a battery holder. Its primary areas of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular pulse transmission in very confined spaces.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361PT are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series demonstrates better behaviour under medium load conditions and pulse currents. The passivation effect is thus overcome more quickly, resulting in more stable power supply in applications that regularly "wake up" to perform tasks. Features ModelTadiran SL-361/PT TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial pins (PT) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connecting wires (pins) that exit centrally from the positive and negative poles of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and permanent soldered connection.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimum continuous current, such as for pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for miniaturised electronics, where the battery is permanently soldered and a long service life with regular power requirements is essential. Examples include compact wireless sensors, miniature medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must never be recharged under any circumstances. Attempting to recharge the cell is dangerous and can lead to overheating, leakage or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed to ensure that this layer is broken down faster and with lower voltage drop under load than with the SL-700 series, which is advantageous for applications with regular pulse currents.
The Tadiran SL-361P from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA size. It was specially developed for applications that require a long service life combined with a moderate current load. This version is pre-configured with axial wire (pins) for flexible and secure solder mounting. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal energy solution for professional, miniaturised electronics.Highlights at a glanceReady to install: With robust, axial wire for direct solder mounting.Compact and powerful: Optimised for moderate loads in the compact 2/3 AA size.High capacity: 1.6 Ah for long runtimes in compact devices.High rated voltage: Stable voltage of 3.6 V throughout almost the entire lifespan.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-361P was specifically developed for applications where both miniaturisation and enhanced power output are crucial. The axial wire enables firm and vibration-proof integration without a battery holder. Its primary fields of application include compact radio sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular transmission pulses in the smallest space.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361P are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal, reliably preventing electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Every cell is designed to deliver its energy consistently and safely over a very long period of time, minimising maintenance costs and reducing the total cost of ownership of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series demonstrates better performance with medium load demands and pulse currents. The passivation effect is overcome more rapidly, resulting in a more stable power supply in applications that regularly "wake up" to perform tasks. Features ModelTadiran SL-361/P TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial wire (P) RechargeableNo FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires (pins) that emerge from the centre of the positive and negative terminals of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and durable solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, which includes this cell, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics in which the battery is firmly soldered and a long service life with regular power requirements is crucial. Examples include compact wireless sensors, small medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and may lead to overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.
The Tadiran SL-550S is a special high-temperature lithium thionyl chloride battery in the extremely compact 1/2 AA form factor. It is designed for maximum reliability and long service life under extreme thermal loads. With its ability to operate continuously at temperatures of up to +130 °C, it sets the standard for the most demanding industrial applications. It offers a nominal voltage of 3.6 V, a capacity of 0.8 Ah, and in this S version is intended for use in battery holders.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Maximum reliability: Designed for use under the harshest environmental conditions.Compact form: 1/2 AA size for use in miniaturised high-temperature applications.High nominal voltage: Stable voltage level of 3.6 V even at high temperatures.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550S was specifically developed for applications where standard lithium batteries would fail due to high temperatures. Its primary areas of application include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring of industrial high-temperature processes, as well as use in autoclaves and medical sterilisation equipment. It is also the first choice for demanding military and aerospace systems.Engineered for maximum heat resistanceThe exceptional thermal load resistance of the SL-550S is based on its reinforced construction and an optimised electrolyte chemistry. The hermetic glass-to-metal seal is specially designed to maintain its integrity and prevent leakage even during repeated temperature cycles. The non-flammable electrolyte and robust stainless steel casing ensure maximum safety, even at the upper temperature limit.Superior high-temperature technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity. A characteristic feature is the passivation effect, which minimises self-discharge and enables a storage life of over 10 years. This high-temperature version maintains its performance and reliability even under conditions far outside the specifications of conventional batteries. Features ModelTadiran SL-550/S TechnologyLithium-thionyl chloride (high temperature) Form factor1/2 AA Nominal voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran high-temperature batteryWhat sets this battery apart from a standard Tadiran cell?The key difference is the extended operating temperature range of up to +130 °C, whereas standard cells such as the SL-750 are only specified up to +85 °C. This is made possible by a special, heat-resistant internal construction and adapted chemistry that ensures reliable operation in extreme heat.For which applications is this battery type essential?This battery type is required for all devices whose operating temperature permanently or periodically rises above +85 °C. Typical examples are measuring instruments in oil production, sensors in the engine compartment of vehicles, or electronics used in industrial furnaces or autoclaves.Does this model have solder terminals or wires?No, the SL-550S model is the standard version with normal battery contacts and is intended for use in a suitable 1/2 AA battery holder. For direct installation, Tadiran also offers high-temperature variants with various solder terminals.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Trying to charge the cell is especially dangerous at high temperatures.Does the high temperature affect the battery service life?Yes, as with any battery, consistently high operating temperature leads to increased self-discharge and may shorten overall service life compared to operation at room temperature. However, the SL-550S is specifically engineered to minimise this effect and achieve the longest possible life under these tough conditions.
The Tadiran SL-550PR is a special high-temperature lithium-thionyl chloride battery in the extremely compact size 1/2 AA. It was designed for maximum reliability and a long service life under extreme thermal stress. With its ability to operate continuously at temperatures of up to +130 °C, it is the ideal energy solution for miniaturised industrial applications. This version is pre-assembled with radial pins for direct and secure mounting on circuit boards.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.For PCB mounting: Pre-assembled with radial pins for direct installation.Extremely compact format: 1/2 AA size for miniaturised high-temperature applications.High rated voltage: Stable voltage level of 3.6 V even at extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550PR was specifically developed for applications in which standard lithium batteries would fail due to high temperatures and a permanent soldering connection is required. The radial pins allow a specific and space-saving arrangement on the PCB. Its main areas of application include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring of industrial high-temperature processes, as well as use in autoclaves and medical sterilisation equipment.Engineered for maximum heat resistanceThe exceptional thermal load capacity of the SL-550PR is based on its reinforced construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is specifically designed to maintain its integrity even under repeated temperature cycles and to prevent leakage. The non-flammable electrolyte and robust stainless steel casing ensure maximum safety, even at the upper end of the temperature range.Superior high-temperature technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and enables a shelf life of over 10 years. This high-temperature variant maintains its performance and reliability even under conditions well outside the specifications of conventional batteries. Features ModelTadiran SL-550/PR TechnologyLithium-thionyl chloride (high temperature) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran high-temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The crucial difference is the extended operating temperature range of up to +130 °C, while standard cells such as the SL-750 are only specified up to +85 °C. This is achieved by a special, heat-resistant internal construction and a customised chemistry, guaranteeing reliable operation under extreme heat.What does the connection with "radial pins" mean?Unlike axial connections that exit from the centre of the poles, radial pins are arranged so that they extend from one end face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.For which applications is this battery type essential?This battery type is essential for all devices whose operating temperature continuously or periodically exceeds +85 °C. Typical examples include measuring instruments for oil production, sensors in vehicle engine compartments or electronics used in industrial ovens or autoclaves.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is extremely dangerous, especially at high temperatures.Does the high temperature affect the service life of the battery?Yes, as with any battery, a permanently high operating temperature leads to increased self-discharge and can shorten the total service life compared to operation at room temperature. However, the SL-550PR is specifically engineered to minimise this effect and achieve the maximum possible service life under these harsh conditions.
The Tadiran SL-550PT is a special high-temperature lithium thionyl chloride battery in the extremely compact size 1/2 AA. It was designed for maximum reliability and long operational life under extreme thermal stress. With the ability to operate continuously at temperatures up to +130 °C, it is the ideal energy solution for miniaturised industrial applications. This version comes equipped with robust axial pins for direct and secure assembly on circuit boards.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Ready to install: With robust, axial pins for direct solder mounting.Extremely compact design: 1/2 AA size for miniaturised high-temperature applications.High rated voltage: Stable voltage of 3.6 V even under extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550PT was specifically developed for applications where standard lithium batteries would fail due to high temperatures and a fixed solder connection is required. Thanks to its miniaturised 1/2 AA size, it is ideal for devices with space constraints. Its primary areas of application include oil and gas exploration (e.g. downhole drilling measurement technology), automotive use in engine compartments, monitoring of industrial high-temperature processes, as well as use in autoclaves and medical sterilisation devices.Engineered for maximum heat resistanceThe outstanding thermal durability of the SL-550PT is based on its reinforced construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is specifically designed to maintain its integrity and prevent leaks even with repeated thermal cycling. The non-flammable electrolyte and robust stainless steel shell ensure maximum safety, even at the upper end of the temperature range.Superior high-temperature technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-500 series is renowned for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and allows storage for over 10 years. This high-temperature version retains its performance and reliability even under conditions that are far outside the specifications of standard batteries.Features ModelTadiran SL-550/PT TechnologyLithium thionyl chloride (high temperature) Size1/2 AA Rated voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionAxial pins (PT) RechargeableNo FAQs about this Tadiran high-temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The key difference is the extended operating temperature range of up to +130 °C, while standard cells such as the SL-750 are only specified up to +85 °C. This is achieved by a special heat-resistant internal construction and adapted chemistry to ensure reliable operation in extreme heat.What does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative pole of the cell. This configuration is designed for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent soldered connection.For which applications is this battery type essential?This battery type is required for all devices where the operating temperature permanently or periodically rises above +85 °C. Typical examples are measuring instruments in oil production, sensors in the engine compartment of vehicles, or electronics used in industrial ovens or autoclaves.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is extremely dangerous, especially at high temperatures.Does high temperature affect the battery's lifetime?Yes, as with any battery, permanently high operating temperature leads to increased self-discharge and can shorten the overall lifetime compared to room temperature operation. However, the SL-550PT is specially engineered to minimise this effect and achieve the maximum possible lifetime under these harsh conditions.
The Tadiran SL-550P is a special high-temperature lithium thionyl chloride battery in the extremely compact 1/2 AA format. It was designed for maximum reliability and long service life under extreme thermal loads. With its ability to operate continuously at temperatures up to +130 °C, it is the ideal energy solution for miniaturised industrial applications. This version comes with robust axial pins pre-configured for direct and secure mounting on circuit boards.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Ready to install: With robust axial pins for direct solder mounting.Extremely compact design: 1/2 AA size for miniaturised high-temperature applications.High nominal voltage: Stable voltage level of 3.6 V even in extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550P was specifically developed for applications where standard lithium batteries would fail due to high temperatures and a permanent solder connection is required. Thanks to its miniaturised 1/2 AA size, it is ideal for space-critical devices. Its primary fields of application include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring industrial high-temperature processes and use in autoclaves and medical sterilisation equipment.Designed for maximum heat resistanceThe exceptional thermal endurance of the SL-550P is based on its reinforced construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is specially designed to preserve its integrity and prevent leakage even during repeated temperature cycles. The non-flammable electrolyte and robust stainless steel casing ensure the highest level of safety, even at the upper end of the temperature range.Superior high-temperature technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and enables a shelf life of over 10 years. This high-temperature version retains its performance and reliability even under conditions that are far outside the specifications of conventional batteries. Characteristics ModelTadiran SL-550/P TechnologyLithium thionyl chloride (high temperature) Format1/2 AA Nominal voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionAxial pins (P) RechargeableNo FAQs about this Tadiran high-temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The decisive difference is the extended operating temperature range of up to +130 °C, while standard cells such as the SL-750 are specified only up to +85 °C. This is achieved by a special heat-resistant internal construction and a customised chemistry, which ensure reliable operation in extreme heat.What does the connection with "axial pins" mean?This model is fitted with connection wires (pins) that protrude centrally from the positive and negative terminals of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent solder connection.For which applications is this battery type essential?This battery type is required for all devices whose operating temperature permanently or periodically exceeds +85 °C. Typical examples include instrumentation in oil production, sensors in the engine compartment of vehicles, or electronics used in industrial ovens or autoclaves.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is extremely dangerous, especially at high temperatures.Does high temperature affect battery life?Yes, as with any battery, a permanently high operating temperature leads to increased self-discharge and can reduce total life compared to operation at room temperature. However, the SL-550P is specially designed to minimise this effect and achieve the maximum possible life under these harsh conditions.
The Tadiran SL-560S is a special high-temperature lithium thionyl chloride battery in the widely used AA (Mignon) format. It has been designed for maximum reliability and long operating life under extreme thermal stress. With its ability to operate continuously at temperatures of up to +130 °C, it sets the standard for the most demanding industrial applications in the common AA format. It offers a nominal voltage of 3.6 V, a capacity of 1.7 Ah and, in this S version, is intended for use in battery holders.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Standardised format: AA / Mignon for broad compatibility in high temperature applications.High capacity: 1.7 Ah especially for optimised use at high temperatures.High nominal voltage: Stable voltage of 3.6 V even at extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-560S was specifically developed for applications where standard lithium batteries would fail due to high temperatures. The standard AA size allows its use in many existing device designs. Its primary applications include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring industrial high-temperature processes, as well as use in autoclaves and medical sterilisation equipment.Designed for maximum heat resistanceThe exceptional thermal resistance of the SL-560S is based on its reinforced construction and an optimised electrolyte chemistry. The hermetic glass-to-metal seal is specially designed to maintain its integrity even under repeated temperature cycles and to prevent leaks. The non-flammable electrolyte and robust stainless steel housing ensure the highest level of safety, even at the upper limit of the temperature range.Superior high temperature technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and enables a shelf life of over 10 years. This high-temperature variant retains its performance and reliability even under conditions far beyond the specifications of conventional batteries. Features ModelTadiran SL-560/S TechnologyLithium thionyl chloride (high temperature) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)1700 Max. continuous discharge current70 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 19 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran high temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The main difference is the extended operating temperature range of up to +130 °C, whereas standard cells such as the SL-760 are only specified up to +85 °C. This is achieved by a special heat-resistant internal design and adapted chemistry, which ensures reliable operation in extreme heat.For which applications is this battery type indispensable?This battery type is required for all devices whose operating temperature rises permanently or periodically above +85 °C. Typical examples are measuring instruments in oil production, sensors in the engine compartment of vehicles or electronics used in industrial ovens or autoclaves.Does this model have solder tabs or wires?No, the SL-560S model is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers high temperature versions with various solder tabs.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is extremely dangerous, especially at high temperatures.Does the high temperature affect the service life of the battery?Yes, as with any battery, permanently high operating temperature leads to increased self-discharge and can shorten the total service life compared to operation at room temperature. However, the SL-560S has been specially designed to minimise this effect and achieve the maximum possible service life under these tough conditions.
The Tadiran SL-2770S is a revolutionary PulsesPlus hybrid battery in the standard size C (Baby). It was specially developed for modern electronic applications that require both a long service life and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). This version offers a high energy reserve for long-term applications, with 7.2 Ah.Highlights at a glanceHigh pulse current capability: Ideal for applications with high peak current requirements (up to 1.5 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Very high capacity: 7.2 Ah from the primary cell for extremely long, self-sufficient runtimes.Maximum service life: The primary cell is only minimally stressed, which maximises longevity.Robust C (Baby) design: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2770S is the optimal energy solution for demanding applications that spend most of their time in standby mode but periodically require high performance for transmissions. Its primary areas of use include modern radio modules (GSM, LTE, IoT), professional asset tracking systems, emergency call systems (eCall), security and surveillance technology, as well as military communication equipment. Wherever a standard lithium battery would collapse under pulse load, PulsesPlus technology provides reliable performance.PulsesPlus technology: Maximum energy and performanceThe core of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell serves as a long-term energy store and constantly charges the parallel-connected hybrid layer capacitor (HLC). If the application requires a high current pulse, this is supplied directly by the HLC and not by the primary cell. This intelligent system protects the primary cell from heavy loads, prevents the typical voltage drop caused by passivation, and thus ensures stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unequalled advantages. It combines the high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source which remains operational for over 10 years and can deliver high power instantly when required, even after long idle times and at low temperatures. Features ModelTadiran SL-2770/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)8500 Max. continuous discharge current300 mA Max. pulse current600 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 50 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-life lithium primary battery with a rechargeable hybrid layer capacitor (HLC). The battery provides the energy for extremely long life, while the capacitor delivers the high performance for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power, but periodically require short, high current pulses. A typical example is an asset tracker that sends its position via mobile once a day. A standard battery would experience a voltage drop during such a transmission pulse, but the PulsesPlus battery would not.Does PulsesPlus completely prevent the passivation effect?Yes, from an application perspective, the passivation effect is completely eliminated. As the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never faces the high load. Thus, the voltage drop that occurs in standard cells due to the passivation layer is effectively avoided.Does this model have solder terminals or wires?No, the model SL-2770S is the standard version with normal battery contacts and is intended for use in a suitable C battery holder. For direct installation, Tadiran also offers versions of this cell type with various connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged by an external source. The integrated capacitor is recharged exclusively by the primary cell itself.
The Tadiran SL-2780S is a revolutionary PulsesPlus hybrid battery in the standard size D (Mono). It was developed for demanding long-term applications that require both a very high energy reserve and the ability to deliver high current pulses. The system combines a long-lasting lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With a very high capacity of 16.5 Ah, it is the first choice for devices that need to function completely autonomously for many years.Highlights at a glanceVery high capacity: 16.5 Ah for extremely long, autonomous runtimes.High pulse current capability: Ideal for applications with high peak current demand (up to 3 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust D (Mono) design: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2780S is the optimal energy solution for applications that need to operate for years to decades without maintenance and periodically require high performance for transmission operations. Its primary fields of application include long-term asset tracking systems, autonomous measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements, as well as demanding military applications.PulsesPlus technology: Maximum energy and performanceThe core of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 16.5 Ah serves as a long-term energy store and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is supplied directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop caused by passivation, and thus ensures stable voltage and maximum service life.Superior lithium-hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unrivalled advantages. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is an energy source that remains operational for decades and can immediately deliver high performance when required, even after long periods of inactivity and at low temperatures.Features ModelTadiran SL-2780/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeD (Mono) Nominal voltage (V)3.6 Capacity (mAh)16500 Max. continuous discharge current500 mA Max. pulse current3000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 60.0 Weight (g)approx. 95 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-lasting lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for an extremely long service life, while the capacitor delivers the high performance for current pulses.For which applications is a PulsesPlus battery superior to a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require brief, high current pulses. A typical example is an asset tracker that transmits its position once a day via mobile communications. A standard battery would experience a voltage drop during this transmission pulse, but the PulsesPlus battery would not.Does PulsesPlus completely prevent the passivation effect?Yes, from the application's point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never experiences the high load. This effectively prevents the voltage drop that occurs in standard cells due to the passivation layer.Does this model have solder terminals or wires?No, the SL-2780S model is the standard version with normal battery contacts and is intended for use in a suitable D battery holder. For direct installation, Tadiran also offers variants of this cell type with different connections.Is this system rechargeable?No, this is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.
The Tadiran SL-2790S is a revolutionary PulsesPlus hybrid battery in the large case size DD. It was developed for the most demanding long-term applications that require both extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With an enormous capacity of 32 Ah, it is the first choice for devices that have to operate completely autonomously for many years.Highlights at a glanceExtremely high capacity: 32 Ah for maximum autonomous operating times over many years.High pulse current capability: Ideal for applications with high peak current requirements (up to 4 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust DD form factor: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2790S is the optimal energy solution for applications that must work for years to decades without maintenance and still need periodic high power for transmission processes. Its main application areas include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements as well as demanding military applications.The PulsesPlus technology: Maximum energy and performanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as long-term energy storage and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is delivered directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and so ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unmatched benefits. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use over decades and can provide high power immediately when required, even after long periods of inactivity and at low temperatures. Features ModelTadiran SL-2790/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) Case sizeDD Rated voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran PulsesPlus batteryWhat exactly is the PulsesPlus technology?PulsesPlus is a hybrid system that combines a durable lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for a very long service life, while the capacitor provides the high output for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high current bursts. A typical example is a self-sufficient measuring buoy that transmits its data to a satellite once a day. A standard battery would experience a voltage drop with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application’s point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never encounters the high load. As a result, the voltage drop caused by the passivation layer in standard cells is effectively avoided.Does this model have solder or wire connections?No, the model SL-2790S is the standard version with regular battery contacts and is intended for use in a suitable DD battery holder. For direct installation, Tadiran also offers versions of this cell type with different connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.
The Tadiran SL-2790T is a revolutionary PulsesPlus hybrid battery in the very large size DD. It was developed for the most demanding long-term applications that require both an extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). This version is equipped with solder tags (LF-U) pre-assembled for direct mounting on circuit boards and offers the maximum available capacity of this series at 32 Ah.Highlights at a GlanceExtremely high capacity: 32 Ah for maximum independent runtimes over many years.High pulse current capability: Ideal for applications with high peak current demand (up to 4 A).No voltage dip: The integrated HLC prevents the passivation effect under load.For PCB mounting: Pre-assembled with solder tags for direct and secure installation.Maximum service life: Low self-discharge of the primary cell and gentle operation.Powerful in a Wide Variety of ApplicationsThe Tadiran SL-2790T is the optimum energy solution for applications that have to operate for years or even decades without maintenance and require periodically high performance for transmission processes. Its main areas of use include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy needs and demanding military applications in which the energy source is integrated directly on a mainboard.The PulsesPlus Technology: Maximum Energy and PerformanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as a long-term energy store and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is supplied directly from the HLC, not from the primary cell. This clever system protects the primary cell from high loads, prevents the typical voltage drop caused by passivation, and thus ensures stable voltage and maximum service life.Superior Lithium Hybrid TechnologyBy combining the best properties of two technologies, the PulsesPlus battery offers unrivalled advantages. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use for decades and can provide high power immediately as needed, even after long periods of inactivity and at low temperatures. Features ModelTadiran SL-2790/T TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeDD Nominal voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 Connectionsolder tab (T) RechargeableNo FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-life lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for an extremely long service life, while the capacitor provides the high power for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually require very little power, but periodically require short, high current surges. A typical example is a self-sufficient measuring buoy that transmits its data by satellite once a day. A standard battery would experience a voltage dip with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely eliminate the passivation effect?Yes, from the application's point of view, the passivation effect is completely eliminated. Since the high current pulse is provided by the HLC and not by the primary cell, the primary cell never sees the high load. This effectively avoids the voltage dip that occurs with standard cells due to the passivation layer.What does connection with solder tags mean?This model is equipped with metal contacts, so-called solder tags, which can be soldered directly onto a printed circuit board (PCB) for a simple and permanently secure connection. This ensures an excellent mechanical and electrical connection.Is this system rechargeable?No, this is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.
The Tadiran SL-750S is a primary high-performance lithium thionyl chloride battery in the extremely compact 1/2 AA format. It has been developed for maximum reliability and a very long service life in miniaturised and space-constrained applications. With a nominal voltage of 3.6 V and a capacity of 1.0 Ah, it is the ideal energy solution for professional electronics that require maximum performance in a minimum of space. This model is the standard version for use in suitable battery holders.Highlights at a glanceExtremely compact form factor: 1/2 AA size for maximum miniaturisation of your application.Reliable capacity: 1.0 Ah for a long and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of under 1% per year.Outstanding longevity: Designed for an operational and storage life of over 10 years.Extensive temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-750S is your first choice when space is the limiting factor. Its extremely small form factor makes it indispensable for compact sensors, medical devices (e.g. in diagnostics), memory backups (RTC, CMOS) on densely packed circuit boards, and for military applications. It is perfectly suited to all devices that require a long-lasting and reliable energy source, but do not offer space for a standard AA cell.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-750S are based on its well-conceived construction. The cell features a hermetic glass-to-metal seal that reliably prevents the leakage of electrolyte. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Every cell is designed to release its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total cost of ownership of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers decisive advantages for long-term use. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, drastically reducing self-discharge and thus allowing for extremely long shelf life. This technology ensures that the energy is still almost fully available even after years of storage, setting the SL-750S apart from all other battery technologies. Features ModelTadiran SL-750/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.Does this model have solder tags or wires?No, the model SL-750S is the standard version with conventional battery contacts and is intended for use in a suitable 1/2 AA battery holder. For direct installation on circuit boards, Tadiran offers variants of this cell type with different solder tags.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. At initial load, this layer can cause a short voltage delay. For applications that require immediate high pulse currents, appropriate circuit designs or special battery types should be considered.What devices is this battery type suitable for?This battery type is designed exclusively for professional and industrial electronics with very limited space. This includes compact sensors, memory backup, compact medical devices, and demanding location systems.How long does the battery last and how should it be stored?The battery has a shelf life of over 10 years. For maximum longevity, we recommend storing it in a cool, dry place with low humidity.
The Tadiran SL-750PT is a primary high-performance lithium thionyl chloride battery in the extremely compact size 1/2 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version is preconfigured with axial pins for flexible and secure solder assembly, making it ideal for miniaturised "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.Ready to install: With robust, axial pins for direct solder assembly.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.High rated voltage: Stable voltage of 3.6 V during nearly the entire service life.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-750PT was specifically developed for long-term applications with low continuous current, where the battery is firmly integrated into the electronics and the installation space is limited. The axial pins enable flexible integration into the circuit. Its primary fields of application include memory backups (RTC, CMOS) in compact industrial controls, miniaturised metering technology, and durable wireless security sensors.Designed for maximum safety and efficiencyThe safety and longevity of the SL-750PT are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents leakage of the electrolyte. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces the total operating costs of your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long shelf and operating life. This ensures that the energy is reliably available even after many years. Features ModelTadiran SL-750/PT TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Rated voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionAxial pins (PT) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge from the centre of the positive and negative pole of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and permanent solder connection.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolutely lowest self-discharge. It is the best choice for applications that require very little current over many years, such as memory retention (memory backup). In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This battery type is ideal for miniaturised professional electronics, where the battery is permanently soldered and an extremely long service life is crucial. Typical applications are compact counters, miniature industrial controllers, and long-life security sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. During the first load, it can cause a brief voltage delay. This should be considered in the circuit design for applications that require current immediately after activation.
The Tadiran SL-750T is a primary high-performance lithium thionyl chloride battery in the extremely compact size 1/2 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long operating life with minimal self-discharge. This version is pre-assembled with solder tabs (LF-U) for direct and secure mounting on PCBs, making it ideal for miniaturised “Fit and Forget” applications.Highlights at a glanceMaximum lifespan: Extremely low self-discharge of less than 1% per year.For PCB mounting: Pre-assembled with solder tabs for direct installation.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.High nominal voltage: Stable voltage of 3.6 V for almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-750T was specifically developed for long-term applications with low continuous current where the battery is permanently integrated into the electronics and installation space is limited. Its primary applications include memory backups (RTC, CMOS) in compact industrial controllers, miniaturised metering technology and wireless security sensors. It is the perfect choice for all devices that need to operate independently for over a decade without battery replacement.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-750T are based on Tadiran’s proven design. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing your application’s total operating costs.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirement. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating capability. This ensures that the energy remains reliably available even after many years. Features ModelTadiran SL-750/T TechnologyLithium-thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionSolder tab (T) RechargeableNo FAQs about this Tadiran batteryWhat does connection with solder tabs mean?This model is equipped with metal contacts, known as solder tabs, which can be soldered directly onto a printed circuit board (PCB) for a simple and permanently secure mounting. This ensures excellent mechanical and electrical connectivity without the need for a battery holder.What is the advantage of the SL-700 series compared to other series?The SL-700 series is optimised for the lowest possible self-discharge. It is the best choice for applications that require very little power for many years, such as data retention (memory backup). In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current demand.For which devices is this battery type suitable?This type of battery is ideal for miniaturised professional electronics in which the battery is permanently soldered and an extremely long service life is essential. Typical applications are compact meters, miniature industrial controllers and security sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is responsible for the extremely low self-discharge. When first used, it can cause a brief voltage delay. This should be considered in circuit design for applications that require current immediately after activation.
The Tadiran SL-750PR is a primary high-performance lithium-thionyl chloride battery in the extremely compact size 1/2 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version is preassembled with radial pins for specific and secure mounting on PCBs, making it ideal for miniaturised "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.For PCB mounting: Preassembled with radial pins for direct installation.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-750PR has been specifically developed for long-term applications with low continuous current, where the battery is permanently integrated into the electronics and the installation space is limited. The radial pins allow a specific and space-saving arrangement on the PCB. The main areas of application are memory backups (RTC, CMOS) in compact industrial controllers, miniaturised metering technology and long-life wireless safety sensors.Designed for maximum safety and efficiencyThe safety and longevity of the SL-750PR are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.Superior lithium-thionyl chloride technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, reducing the self-discharge to an absolute minimum and thus enabling extremely long storage and operating periods. This ensures that the energy is reliably available even after many years. Features ModelTadiran SL-750/PR TechnologyLithium-thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which emerge from the centre of the terminals, radial pins are arranged so that they emerge from one face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series compared to other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that need very little power over many years, such as memory backup. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This battery type is ideal for miniaturised professional electronics, where the battery is permanently soldered and an extremely long service life is crucial. Typical applications are compact counters, industrial mini controllers and long-life safety sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not under any circumstances be recharged. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. During the first load, it can cause a short voltage delay. This should be taken into account in the circuit design for applications that require current immediately after activation.
The Tadiran SL-750P is a primary high-performance lithium thionyl chloride battery in the extremely compact 1/2 AA size. This special version is pre-assembled with robust axial connection wires, allowing flexible and direct installation in electronic assemblies. With a nominal voltage of 3.6 V and a capacity of 1.0 Ah, it is the ideal energy solution for professional, miniaturised applications where longevity and fixed integration are essential.Highlights at a glanceReady to install: With robust, pre-assembled axial wires for direct mounting.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.Reliable capacity: 1.0 Ah for a long and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-750P is the first choice when space is the limiting factor and a fixed, soldered connection is required. The axial wires allow flexible and direct integration into the circuit without the need for a battery holder. It is indispensable for compact sensors, medical devices, memory backups (RTC, CMOS) on densely packed boards, and for military applications where vibration resistance is a high priority.Designed for maximum safety and efficiencyThe safety and longevity of the SL-750P are based on its well-thought-out construction. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) provides crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, drastically reducing self-discharge and enabling the extremely long shelf life. This technology ensures that even after years of storage, the energy is still almost fully available, setting the SL-750P apart from all other battery technologies. Characteristics ModelTadiran SL-750/P TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionAxial wires (P) RechargeableNo FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage or explosion of the cell.What does the "axial wire" connection mean?This model is equipped with connection wires that run out from the centre of the positive and negative poles of the cell in opposite directions along the longitudinal axis. This configuration allows very flexible mounting and direct connection to the electronics by soldering, without the need for a battery holder.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the surface of the lithium, which minimises self-discharge. When the load is first applied, this layer may cause a short voltage delay. For applications that require immediate high current pulses, appropriate circuit designs or special battery types should be considered.For which devices is this battery type suitable?This battery type is designed exclusively for professional and industrial electronics with very limited space, where the cell is soldered directly. These include compact sensors, memory backup and small medical devices.What is the shelf life of the battery and how should it be stored?The battery has a shelf life of over 10 years. For maximum longevity, we recommend storing it in a cool, dry place with low humidity.
The Tadiran SL-760S is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). It was developed for maximum reliability and an extremely long service life. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional electronic applications that require a durable and stable power supply in a standard format. This model is the standard version for use in battery holders.Highlights at a glanceStandardised design: Common size AA (Mignon) for broad compatibility.High capacity: 2.2 Ah for a very long and autonomous service life.High nominal voltage: Stable voltage level of 3.6 V over almost the entire lifetime.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding durability: Designed for an operating and storage life of more than 10 years.Extreme temperature range: Fully functional within a temperature range from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-760S is the perfect choice to replace conventional batteries in devices where frequent battery changes are undesirable or costly. It is excellently suited for professional original equipment in metering technology (water, gas, electricity), for memory backup (RTC, CMOS) in computers and controllers, as well as in alarm systems, security systems and industrial sensors that use AA battery holders.Designed for maximum safety and efficiencyThe safety and durability of the SL-760S are based on its carefully thought-out construction. The cell features a hermetic glass-metal seal which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Every cell is designed to deliver its energy constantly and safely over a very long period, which minimises maintenance costs and lowers the overall operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers decisive advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, significantly reducing self-discharge and thus enabling extremely long shelf life. This technology ensures that energy is still almost completely available even after years of storage, setting the SL-760S apart from all other battery technologies. Features ModelTadiran SL-760/S TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionStandard (industrial head) RechargeableNo FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage or bursting of the cell.Does this model have solder terminals or wires?No, the model SL-760S is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation on circuit boards, Tadiran offers variants of this cell type with different solder connections (e.g. solder tags or axial wires).What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. On first use, this layer can cause a brief voltage delay. For applications that require immediate high current pulses, corresponding circuit designs or special battery types should be considered.For which devices is this battery type suitable?This battery type is designed exclusively for professional and industrial electronics. These include, among others, meters, memory backup, security technology, medical devices and sophisticated tracking systems that use AA batteries.How long is the battery shelf life and how should it be stored?The battery has a shelf life of more than 10 years. For maximum shelf life, we recommend storage in a cool and dry place with low humidity.
The Tadiran SL-760T is a primary high-performance lithium thionyl chloride battery in AA (Mignon) size, developed for maximum reliability and an extremely long service life. With a nominal voltage of 3.6 V and a capacity of 2.2 Ah, it is the ideal energy solution for professional electronic applications in which battery replacement is not possible or desired for years. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceHigh rated voltage: Stable voltage level of 3.6 V throughout almost the entire lifetime.Maximum reliability: Extremely low self-discharge rate of below 1% per year.Outstanding longevity: Designed for an operational and storage lifetime of over 10 years.Extreme temperature range: Fully functional in a temperature range from -55 °C to +85 °C.High energy density: One of the highest energy densities of all primary lithium batteries.Reliable performance for critical applicationsThe Tadiran SL-760T was specially developed for long-term applications with low continuous current and periodic high peaks. It is the preferred choice for professional original equipment in metering technology (water, gas, electricity), for memory backup (RTC, CMOS), in alarm and security systems as well as in industrial control systems (PLC). Its reliability also makes it indispensable for GPS tracking systems, automotive electronics and military applications where failure is not an option.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760T are based on its well-designed construction. The cell features a hermetic glass-to-metal seal, which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, drastically reducing self-discharge and thus enabling extremely long shelf life. This technology ensures that the energy is still almost completely available even after years of storage, which sets the SL-760T apart from all other battery technologies.Characteristics ModelTadiran SL-760/T TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. constant discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionSolder tag (T-form) RechargeableNo FAQs about the Tadiran SL-760T batteryIs this battery rechargeable?No, the Tadiran SL-760T is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. At first load, this layer can cause a brief voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types such as the Tadiran PulsesPlus series should be considered.How long is the battery's shelf life and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storage in a cool and dry place with low humidity.For which devices is this battery type suitable?This battery type is designed exclusively for professional and industrial electronics. These include electricity, water and gas meters, memory backup, security technology, medical devices and advanced locating systems.What does the "CLG 3mm solder tag" connection mean?This model comes from the factory with a special 3mm wide solder tag (CLG configuration). This connection makes it easy and safe to solder the cell directly to circuit boards or into electronic assemblies, ensuring a permanently stable electrical connection.What makes this battery safer than other battery types?Safety is ensured by several factors: the hermetic glass-to-metal seal prevents leaks, the inorganic electrolyte is non-flammable, and the cell is not pressurised at room temperature. This ensures a high degree of operational safety.
The Tadiran SL-760PT is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimum self-discharge. This version is factory-fitted with a special 3-pin configuration (+1 pin / -2 pins) for particularly stable and secure mounting on PCBs. With 3.6 V nominal voltage and 2.2 Ah capacity, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of under 1% per year.Stable PCB mounting: Factory-fitted with 3 radial pins (+1/-2) for maximum mechanical stability.High capacity: 2.2 Ah in standardised AA (Mignon) size.High nominal voltage: Stable voltage of 3.6 V for almost the entire lifetime.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-760PT was specifically developed for long-term applications with low continuous current, where the battery is securely and vibration-resistantly integrated into the electronics. The 3-pin configuration provides superior mechanical stability on the circuit board. Its main areas of use include memory backups (RTC, CMOS) in industrial controllers (PLC), metering technology (metering for water, gas, electricity), as well as long-lasting security technology and alarm systems.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760PT are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period of time, minimising maintenance costs and reducing the total cost of ownership for your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low power requirements. A distinctive feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to an absolute minimum, thus enabling extremely long shelf and operating life. This ensures that the energy is reliably available even after many years. Features ModelTadiran SL-760/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 Connection3 pins (PT) RechargeableNo FAQs about this Tadiran batteryWhat is the advantage of the 3-pin configuration (+1/-2)?This special arrangement with one positive and two negative pins provides exceptionally high mechanical stability when the cell is soldered to a printed circuit board (PCB). It reliably prevents the cell from twisting or wobbling, making it ideal for devices exposed to vibrations or mechanical stress.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This battery type is ideal for professional electronics where the battery is permanently soldered and an extremely long service life and high mechanical stability are crucial. Typical uses include meters, industrial computers, and alarm systems.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can cause overheating, leakage, or bursting of the cell.What does the passivation effect mean in this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. During the first load, it can cause a brief voltage delay. This should be taken into account in circuit designs for applications that require current immediately after activation.
The Tadiran SL-760PR is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimum self-discharge. This version is pre-configured with radial pins (+/- 1 pin) for the direct and secure mounting on PCBs. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.For PCB mounting: Pre-configured with radial pins (+/- 1 pin) for direct installation.High capacity: 2.2 Ah in standardised AA (Mignon) format.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-760PR was specifically developed for long-term applications with low continuous current, in which the battery is permanently integrated into the electronics. The radial pins enable a specific and space-saving arrangement on the PCB. Its primary areas of application include memory backups (RTC, CMOS) in industrial control systems (PLC), metering technology (metering for water, gas, electricity) as well as long-life security technology and alarm systems in the common AA format.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760PR are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, reducing maintenance costs and the total operating costs of your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to an absolute minimum, enabling extremely long storage and operational capability. This ensures that energy is reliably available even after many years. Features ModelTadiran SL-760/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit from the centre of the terminals, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current demand.For which devices is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered and an extremely long service life is decisive. Typical applications are meters, industrial computers, alarm systems and long-life sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or rupture of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first use, it can lead to a short voltage delay. This should be considered in circuit design for applications that require current immediately after activation.
The Tadiran SL-760P is a primary high-performance lithium-thionyl chloride battery in the widely used size AA (Mignon). This special version comes pre-assembled with robust axial connection wires, allowing flexible and direct installation in electronic assemblies. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional electronic applications requiring long-lasting power supply in a standard format.Highlights at a glanceReady to install: With robust, pre-assembled axial wires for direct mounting.High capacity: 2.2 Ah for a very long and self-sufficient operating life.High nominal voltage: Stable voltage of 3.6 V throughout almost the entire service life.Maximum reliability: Extremely low self-discharge rate of under 1% per year.Outstanding longevity: Designed for an operating and storage life of over 10 years.Extreme temperature range: Fully functional in a temperature range from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-760P is the perfect choice for long-life installations where battery replacement is undesirable. The axial wires allow flexible and direct integration into the circuit without the need for a battery holder. It is ideal for professional original equipment in metering (water, gas, electricity), for memory backups (RTC, CMOS) as well as in alarm systems, security systems and industrial sensors.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-760P are based on its considered construction. The cell is fitted with a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to supply its energy constantly and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.Superior lithium-thionyl chloride technologyLithium-thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. One characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, dramatically reducing self-discharge and thus enabling extremely long shelf life. This technology ensures that the energy remains almost fully available even after years of storage, which sets the SL-760P apart from all other battery technologies. Characteristics ModelTadiran SL-760/P TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial wires (P) RechargeableNo FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may result in overheating, leakage, or bursting of the cell.What does "axial wire" connection mean?This model is fitted with connection wires that exit centrally from the positive and negative pole of the cell, running in opposite directions along the longitudinal axis. This configuration allows very flexible mounting and direct connection to the electronics via soldering, without requiring a battery holder.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. On initial load, this layer may result in a brief voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.Which devices is this battery type suitable for?This battery type is solely designed for professional and industrial electronics. These include, among others, meters, memory backup, security technology, medical devices and sophisticated tracking systems where the battery is soldered directly in place.How long is the battery shelf life and how should it be stored?The battery offers a shelf life of over 10 years. For maximum shelf life, we recommend storage in a cool, dry place with low humidity.
The Tadiran SL-761S is a primary high-performance lithium thionyl chloride battery in the compact special size 2/3 AA. It was designed for maximum reliability and an extremely long operating life in space-critical applications. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal power solution for professional electronic assemblies where miniaturisation and longevity are important. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceCompact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for long and self-sufficient operating periods.High nominal voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding longevity: Designed for more than 10 years of operating and storage life.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, the Tadiran SL-761S is ideal for space-critical applications where a standard AA cell would be too large. It is the preferred choice for professional original equipment in compact sensors, for memory backup (RTC, CMOS) on densely populated boards, in smaller alarm systems and in medical technology. Its reliability also makes it indispensable for miniaturised GPS tracking modules and other mobile monitoring devices.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761S are based on its well thought-out construction. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy is almost completely available even after years of storage, which distinguishes the SL-761S from all other battery technologies. Characteristics ModelTadiran SL-761/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionStandard (industrial head) RechargeableNo FAQs about the Tadiran SL-761S batteryIs this battery rechargeable?No, the Tadiran SL-761S is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface that minimises self-discharge. With the first load, this layer can lead to a short voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.How long does the battery last and how should it be stored?The battery has a shelf life of more than 10 years. For maximum durability, we recommend storing it in a cool and dry place with low humidity.Which devices is this battery type suitable for?This battery type is intended exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology and miniaturised tracking systems.Does this model have solder connections?No, this SL-761S model is the standard version and is supplied without solder connections. It is intended for use in suitable battery holders. For direct installation on PCBs, Tadiran offers variants of this cell type with different solder connections.What makes this battery safer than other battery types?Safety is ensured by several factors: The hermetic glass-to-metal seal prevents leakage, the inorganic electrolyte is non-flammable and the cell is not under pressure at room temperature. This ensures a high level of operational safety.
The Tadiran SL-761PR is a primary high-performance lithium thionyl chloride battery in the compact size 2/3 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version is pre-assembled with radial pins for direct and secure mounting on circuit boards. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a GlanceMaximum longevity: Extremely low self-discharge of under 1% per year.For PCB mounting: Pre-assembled with radial pins for direct installation.Reliable capacity: 1.5 Ah in compact 2/3 AA size.High nominal voltage: Stable voltage of 3.6 V for almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a Range of ApplicationsThe Tadiran SL-761PR was specifically developed for long-term applications with low continuous current, where the battery is firmly integrated into the electronics. The radial pins allow specific and space-saving placement on the board. Its main areas of use include memory backups (RTC, CMOS) in industrial control units (PLC), meter technology (metering for water, gas, electricity) as well as long-lasting security technology and alarm systems.Engineered for Maximum Safety and EfficiencyThe safety and longevity of the SL-761PR are based on Tadiran’s proven design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high intrinsic safety. Each cell is designed to supply its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior Lithium Thionyl Chloride TechnologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A distinctive feature is the passivation effect: a thin protective layer forms on the lithium anode, which minimises self-discharge to an absolute minimum and enables extremely long storage and operating times. This ensures that the energy is reliably available even after many years.Features ModelTadiran SL-761/PR TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1500 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionRadial pins (PR) RechargeableNo FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit from the centre of the terminals, radial pins are arranged so that they exit from one end face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and allows particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little current over many years, such as memory backup in computers. In contrast, other series (like the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This type of battery is ideal for professional electronics where the battery is permanently soldered and an extremely long service life is essential. Typical applications are meters, industrial computers, alarm systems and long-lasting sensors with specific board layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can cause overheating, leakages or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. Upon first load, it can cause a brief voltage delay. This should be considered in circuit design for applications that require current immediately after activation.
.The Tadiran SL-761/T is a 3.6 V lithium thionyl chloride battery (size 1/6 AA, 0.85 Ah) with axial solder wires (T). It is used for reliable long-term operation in industrial devices and storage systems that require high energy density..
The Tadiran SL-761PT is a primary high-performance lithium-thionyl chloride battery in the compact size 2/3 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long operating life with minimum self-discharge. This version is pre-assembled with axial connection wires for flexible and secure solder mounting. With a rated voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal energy solution for professional "Fit and Forget" applications.Highlights at a glanceReady to install: With robust, pre-assembled axial wires for direct mounting.Maximum longevity: Extremely low self-discharge of less than 1 % per year.Reliable capacity: 1.5 Ah in a compact 2/3 AA size.High rated voltage: Stable voltage level of 3.6 V over almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-761PT has been specifically developed for long-term applications with low continuous current, where the battery is permanently integrated into the electronics. The axial wires allow flexible and direct integration into the circuit. Its primary areas of application include memory backups (RTC, CMOS) in industrial controllers (PLC), metering technology (metering for water, gas, electricity) as well as long-life security technology and alarm systems. It is the perfect choice for all devices that need to operate autonomously for a decade or more without a battery change.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761PT are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, which minimises maintenance costs and reduces the total operating costs of your application.Superior lithium-thionyl chloride technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating life. This ensures that the energy is still reliably available even after many years. Characteristics ModelTadiran SL-761/PT TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 AA Rated voltage (V)3.6 Capacity (mAh)1500 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial wires (PT) RechargeableNo FAQs about this Tadiran batteryWhat does the "axial wires" connection mean?This model is equipped with connection wires that exit the centre of the positive and negative poles of the cell and run in opposite directions along the longitudinal axis. This configuration enables very flexible mounting and direct, fixed connection to the electronics by soldering, without requiring a battery holder.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This type of battery is ideal for professional electronics where the battery is permanently soldered and an extremely long service life is crucial. Typical applications are meters, industrial computers, alarm systems and long-life sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After extended storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first load, it can lead to a short voltage delay. This should be considered in circuit design for applications that require immediate current after activation.
The Tadiran lithium battery of size 2/3 AA is a primary high-performance cell designed for maximum reliability and an extremely long operating life. This special version is preassembled with robust axial connection wires (CNA), which enables flexible and direct installation in electronic assemblies. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal energy solution for professional, space-critical applications where longevity is crucial.Highlights at a glanceReady to install: With robust, preassembled axial wires for direct mounting.Compact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for a long and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V for almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Extreme temperature range: Fully operational in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, this Tadiran cell is ideal for space-critical applications where a standard AA cell would be too large. The axial wires enable flexible and direct integration into the circuit without the need for a battery holder. It is the preferred choice for professional initial equipment for compact sensors, memory backups (RTC, CMOS) on densely populated boards, smaller alarm systems and in medical technology.Engineered for maximum safety and efficiencyThe safety and longevity of this cell are based on its thoughtful construction. It features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy reliably and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior lithium-thionyl chloride technologyLithium-thionyl chloride technology (Li-SOCl₂) offers decisive advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy remains almost completely available even after years of storage, which sets this cell apart from all other battery technologies. Features ModelTadiran SL-761 (axial wires) TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1500 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial wires RechargeableNo FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the "axial wires" connection mean?This model is equipped with connection wires that emerge centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration enables very flexible assembly and direct connection to the electronics by soldering, without the need for a battery holder.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. This layer can cause a brief voltage delay during initial load. For applications that require immediate high current pulses, appropriate circuit designs or special battery types should be considered.Which devices is this battery type suitable for?This battery type is designed exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology, and miniaturised tracking systems.How long is the battery shelf life and how should it be stored?The battery has a shelf life of over 10 years. For maximum durability, we recommend storage in a cool and dry place with low humidity.
The Tadiran SL-889P from the TLM series is a primary high-performance lithium battery developed for applications with extremely high current and pulse requirements. In contrast to conventional lithium thionyl chloride cells, which are optimised for energy density, this cell is designed for maximum power density. With the ability to deliver pulses up to 5 A, it is the ideal energy solution for the most demanding military, medical and industrial applications. This version is pre-assembled with robust pins for direct and secure mounting on PCBs.Highlights at a glanceExtreme pulse capability: Reliably delivers high current pulses of up to 5 A.High continuous current: Suitable for demanding continuous loads of up to 2 A.Fast voltage response: Low voltage drop and stable voltage even under high load.Compact energy source: 1.0 Ah capacity in a robust, special shape (Ø21mm).For PCB mounting: Pre-assembled with pins for an extremely resilient solder connection.Powerful in a wide range of applicationsThe Tadiran SL-889P was specifically developed for applications where high performance must be accessed in fractions of a second. Its primary areas of use include military communication technology (radios), medical devices such as defibrillators, emergency systems, pyrotechnic igniters, and professional cordless power tools. It is the first choice when conventional primary cells cannot deliver the required performance.TLM series: The technology for maximum performanceTLM (Tadiran Lithium Metal Oxide) technology is based on a unique lithium metal oxide chemistry optimized for high power output. In contrast to Li-SOCl₂ cells designed for longevity, TLM technology enables the construction of cells with very low internal resistance. This leads to a rapid voltage response without the delay caused by passivation and enables the delivery of extremely high currents from a compact and lightweight housing, which is also hermetically sealed and very safe.Engineered for maximum robustnessEach cell of the TLM series is designed for use in harsh conditions. The hermetically sealed glass-to-metal seal and stainless steel housing ensure high resistance to shocks, vibrations, and demanding environments. The pre-assembled solder pins allow an especially strong and durable connection to the PCB, which further enhances the reliability of the overall system. Features ModelTadiran SL-889/P TechnologyLithium (Li-SOCl₂ / Li-MnO₂) SizeSpecific shape Nominal voltage (V)3.0 Capacity (mAh)1000 Max. continuous discharge current500 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (mm)Manufacturer-specific Weight (g)approx. 10 ConnectionPins / solder contacts (P) RechargeableNo FAQs about this Tadiran high-performance batteryWhat is the main difference between the TLM (SL-800) and the Li-SOCl₂ (e.g. SL-700) series?The main difference lies in the design goal. The TLM series is optimised like a sprinter for maximum performance (high currents). The Li-SOCl₂ series are optimised like marathon runners for maximum energy (long service life at low current). They therefore cater to completely different application requirements.For which applications is a TLM battery the right choice?A TLM battery is ideal for devices that require very high power for a short period. Examples include rapid charging of capacitors in a defibrillator, transmission process of a military radio, or initiating a pyrotechnic igniter.What is the advantage of pin connection?Pins offer an extremely robust and mechanically stable connection when soldered directly to a printed circuit board (PCB). This is particularly important for devices exposed to strong vibrations, shocks, or accelerations, as found in military or industrial environments.Why is the nominal voltage specified as 3.0 V?While the open circuit voltage is higher, the nominal voltage of 3.0 V is a realistic value that reflects the stable cell voltage under typical high load. For a high-performance cell, the voltage under load is a crucial quality characteristic.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge a high-performance cell is extremely dangerous.
The Ultralife UHE-ER14250-H is a compact primary lithium battery in the 1/2 AA format (half AA size). It belongs to the “High Energy” series and uses bobbin technology for maximum energy density in the smallest space. With a voltage of 3.6 V and a capacity of 1.2 Ah, it is the worldwide standard for memory backup on computer mainboards and in industrial control systems. It features an extremely long service life and high reliability with low discharge currents. Highlights at a glanceCompact 1/2 AA format: At just 25 mm high, it is exactly half as long as a standard AA battery with the same diameter (14.5 mm).High energy density: Despite its small size, it delivers 1.2 Ah capacity, enough for years of operation in backup applications.Bobbin technology: The internal construction is optimised for low self-discharge (< 2 % per year), making it ideal for devices that are always connected to the mains and only need backup in case of power failure.Constant 3.6V voltage: Delivers a stable voltage, which is much higher than alkaline (1.5V) or lithium-manganese batteries (3.0V).Extreme temperature range: Operates safely between -55 °C and +85 °C, qualifying it for use in outdoor sensors or heated switch cabinets.Long service life: Designed for up to 10 years of service in low-power applications.The standard for mainboards & dive computersThe UHE-ER14250-H (often also called LS14250 by Saft or SL-750 by Tadiran) is the classic “BIOS battery” for industrial computer mainboards, older Apple Macintosh models (G3/G4/G5) and PLC control systems (Siemens S5/S7 backup). This format is also frequently used in professional dive computers, dog collars (for location purposes) and alarm system sensors are used. Features ModelUltralife UHE-ER14250-H (High Energy 1/2 AA) ApplicationCMOS backup (Mac/PC), dive computers, sensors TechnologyLithium-thionyl chloride (Li-SOCl2) – bobbin construction Voltage3.6 V Capacity1.2 Ah (nominal) – high energy density Max. discharge currentapprox. 40–50 mA (continuous) – only for low loads Dimensions (L x W x H in mm)14.5 x 25.2 (size 1/2 AA) ConnectionStandard, pins (PCB) or solder tags Temperature range-55°C to +85°C Special featuresExtremely long-lasting (>10 years), standard for memory backup Weight (g)approx. 10 FAQs for Ultralife UHE-ER14250-HWhat does "1/2 AA" mean?Half length: The designation refers purely to the mechanical size. The battery has the same diameter as an ordinary AA battery (14.5 mm), but is only half as long (approx. 25 mm). It therefore does not fit into normal AA compartments.Can I replace it with a CR14250?Be careful with the voltage: A CR14250 (lithium-manganese) usually has 3.0 volts. The ER14250 (like this Ultralife) has 3.6 volts. In many cases (e.g. dive computers) the difference is acceptable, but some sensitive electronics absolutely require the correct voltage. Check the manual of your device.Is the battery rechargeable?No. This is a primary battery. Never attempt to recharge it. If you are looking for a rechargeable in this size, you usually need a LiFePO4 battery (3.2 V) or Li-Ion (3.7 V) in size 14250, which require a special charger.Is the battery available with solder tags?Yes. As these batteries are often permanently mounted on circuit boards (e.g. in industrial controls), they are often available with different connection types:Standard: Flat terminals for placement in holders.Axial: One wire comes out at the top and one at the bottom (for horizontal installation).Print/Tags: 2 or 3 pins on the underside for direct soldering. Make sure you choose the connection type you need when purchasing.
The Ultralife UHE-ER26500-H is a high-capacity primary lithium battery in the size C (Baby). It belongs to the "High Energy" series and is based on the Bobbin technology (coil construction). This construction is uncompromisingly designed for maximum energy density and extremely long runtimes. With a capacity of 8.8 Ah, it offers almost the energy of a large D-cell in a more compact C-case. It is the perfect solution for applications that need to be self-sufficiently supplied with low currents for years. Highlights at a glanceHigh energy density: Makes optimum use of the housing volume of the C-cell (Baby) and, with 8.8 Ah, provides enormous capacity for long-term applications.Bobbin technology: The internal structure is optimised for low discharge currents, minimising self-discharge and maximising service life.Long shelf life: Thanks to the stable lithium thionyl chloride chemistry (Li-SOCl2), the battery loses less than 2% charge per year and can be stored for over 10 years.Constant voltage: The discharge curve is extremely flat; the nominal voltage of 3.6 V remains stable over almost the entire service life, simplifying the electronics design.Extreme temperature range: Works reliably from arctic -55 °C to hot +85 °C.Industry standard: Hermetically sealed stainless steel housing and laser welding guarantee protection against leaks in sensitive devices.The endurance runner for meters & sensorsThe UHE-ER26500-H is ideal for devices that are to be "installed and forgotten". It is widely used in professional metering equipment (Smart Metering for gas/water), industrial data loggers, alarm system sensors and for memory backup in industrial control systems. Where changing a battery would be expensive or complex, this cell shows its strengths. Features ModelUltralife UHE-ER26500-H (High Energy Bobbin) ApplicationLong-term supply, smart metering, data logger (low current) TechnologyLithium thionyl chloride (Li-SOCl2) - Bobbin Construction Voltage3.6 V Capacity8.8 Ah (Nominal) - High energy density Max. Discharge currentapprox. 150 mA (continuous) - Optimised for long runtimes Dimensions (L x W x H in mm)26.2 x 50.0 (size C / Baby) ConnectionStandard (positive terminal nipple-shaped) or solder lugs Temperature range-55°C to +85°C Special featuresBobbin design, extremely low self-discharge (<1%/year), >10 years shelf life Weight (g)approx. 53 FAQs for Ultralife UHE-ER26500-HWhat is the difference to the UHR-ER26500?The difference lies in the performance curve (energy vs. power).UHE (your battery): "High Energy" (Bobbin). Maximum capacity (8.8 Ah), but only suitable for low currents.UHR (Spiral): "High Rate" (Spiral). Slightly less capacity (approx. 6-7 Ah), but suitable for high currents (e.g. radio transmission, motors). If your device only measures and stores, use the UHE. If it transmits or works mechanically, check whether the current demand will overload the UHE.Can I use this battery instead of a normal C-cell (Baby)?Warning: No! A normal C-cell battery (alkaline) has 1.5 Volts. This industrial battery has 3.6 Volts. If you insert this battery into a toy, standard torch or radio, the device will be damaged by overvoltage. It is designed exclusively for specialised industrial equipment.Why do I measure less voltage on a new battery?This is the passivation effect. Lithium thionyl chloride batteries form an internal protective layer during storage, preventing self-discharge. When measuring voltage with a high-impedance multimeter, it may initially read low or drop immediately under load. The battery must be "depassivated" (short-term load) for full voltage to be available.Is the battery rechargeable?No, it is a primary battery. Recharging may cause gas formation, leakage or explosion.
The Ultralife UHE-ER14505-H is a primary lithium battery optimized for capacity in the widely used AA format (Mignon). It belongs to the "High Energy" series and, unlike the previously discussed UHR series, uses the Bobbin technology (bobbin construction). This means it is not designed for high currents, but for maximum energy density and extremely long running times. It is the ideal "long-term battery" for devices that need to be supplied with low currents for years without requiring a battery change. Highlights at a glanceMaximum capacity in AA format: Offers with 2.4 Ah a significantly higher energy quantity than the high-current variant (UHR, approx. 2.0 Ah) or conventional alkaline batteries, ideal for extremely long operating times.Bobbin technology: The internal design minimises self-discharge and maximises the amount of active lithium, perfect for applications with low discharge currents (a few milliamperes or microamperes).10+ year lifetime: Thanks to the extremely low self-discharge (< 2 % per year), this battery can supply devices for a whole decade before it needs to be replaced.Constant voltage: The voltage of 3.6 V remains stable over almost the entire discharge cycle (flat discharge curve), which makes electronics development easier.Extreme temperature range: Can be used from -55 °C to +85 °C, making it the standard choice for outdoor sensors.High safety: The hermetically sealed stainless steel housing and the stable chemistry (Li-SOCl2) ensure safety even under harsh conditions.The standard for smart home & sensorsThe UHE-ER14505-H is the standard battery for wireless sensors (e.g. window contacts, temperature sensors), heat cost allocators, smoke detectors (10-year models) and memory backup (CMOS/RAM) in computers and industrial controllers. Wherever a device hangs on the wall or is installed for years and only rarely "wakes up", this battery is the right choice. Features ModelUltralife UHE-ER14505-H (High Energy Bobbin) ApplicationLong-term backup, thermostats, smoke detectors (low current) TechnologyLithium-thionyl chloride (Li-SOCl2) - bobbin construction Voltage3.6 V Capacity2.4 Ah (nominal) - high energy density Max. discharge currentapprox. 100 mA (continuous) - optimized for microamp range Dimensions (L x W x H in mm)14.5 x 50.5 (AA / Mignon size) ConnectionStandard (positive terminal nipple-shaped) or soldering tags Temperature range-55°C to +85°C Special featuresBobbin design, extremely low self-discharge (<1%/year), >10 years durable Weight (g)approx. 18 FAQs for Ultralife UHE-ER14505-HWhat is the key difference to the UHR-ER14505?This determines whether your device works or fails:UHE (your battery): "Energy" (bobbin). High capacity (2.4 Ah), but low current. Ideal for sensors that only measure data or retain memory.UHR (Spiral): "Power" (spiral). Less capacity (2.0 Ah), but high current. Necessary for GSM/LTE modules or motors. If you insert the UHE into a GPS tracker with GSM modem, the voltage will collapse while sending.Can I use it as a replacement for normal AA batteries?Warning: No! Normal AA batteries have 1.5 volts. This battery has 3.6 volts. That's more than double! If you put this in a remote control, a wall clock or a toy, you'll destroy the device immediately. It may fit mechanically, but it is not electrically compatible.What is passivation?When these batteries are stored for a long time, a protective layer forms inside (passivation). This is good for durability (no self-discharge), but when you put the battery into operation, the voltage may be low for a few milliseconds before it jumps to 3.6 V. Some sensitive devices then incorrectly display "battery low".Is the battery rechargeable?No. It is a primary battery. Rechargeable lithium batteries in AA size usually have 3.7 V (Li-Ion 14500) or 1.2 V (NiMH) and a completely different chemistry. This cell must not be charged.
The Ultralife UHE-ER34615-H is a size D (mono) primary lithium battery optimised for maximum capacity. It belongs to the "High Energy" series (UHE) and uses the proven Bobbin technology (coil body construction). In contrast to the UHR series (spiral), which is built for high currents, the focus here is on an extremely high energy density. With an incredible 19 Ah capacity, it is a "long-distance runner", developed for applications that need to be supplied with low currents for 10 years or longer. Highlights at a glanceMaximum energy density: Thanks to the bobbin structure, it offers 19 Ah significantly more capacity than the high-current variant (14.5 Ah) and is therefore the leader in the D-size.Bobbin technology: The internal structure minimises inactive parts and maximises the amount of lithium, ideal for low discharge currents over very long periods.Extremely low self-discharge: Loses less than 2 % charge per year in storage (at 23°C), enabling operating times of up to 10-15 years.Wide temperature range: Reliable operation under extreme conditions from -55°C to +85°C.High voltage: Maintains the nominal voltage of 3.6 V almost constantly throughout the entire discharge period.Safety: Hermetically sealed stainless steel case and flame-retardant electrolyte ensure maximum safety in sensitive applications.The standard for smart metering & backupThe UHE-ER34615-H is the classic battery for applications that need to run "forever" without maintenance. It is the standard in the consumption meter industry (gas, water, heat meters), in CMOS memory backup systems, smoke detectors, toll systems and tracking devices with low transmission demand. It is perfectly suited to keep electronics in "sleep mode" alive for years. Features ModelUltralife UHE-ER34615-H (High Energy Bobbin) ApplicationLong-term supply, memory backup, sensors (low current) TechnologyLithium thionyl chloride (Li-SOCl2) - Bobbin Construction Voltage3.6 V Capacity19 Ah (Nominal) - Maximum energy density Max. discharge currentapprox. 200 mA (continuous) - Optimised for low currents Dimensions (L x W x H in mm)34.2 x 61.5 (size D / mono) ConnectionStandard (positive terminal nipple-shaped) or solder tags Temperature range-55°C to +85°C Special featuresBobbin construction, extremely low self-discharge (<1%/year), >10 years shelf life Weight (g)approx. 100 FAQs for Ultralife UHE-ER34615-HWhat is the difference to the UHR-ER34615 (Spiral)?This is the most important difference for your application!UHE (your battery): "High Energy" (Bobbin). Maximum capacity (19 Ah), but low current (max. 200 mA). Like a marathon runner.UHR (Spiral): "High Rate" (Spiral). Less capacity (14.5 Ah), but plenty of current (2000 mA). Like a sprinter. Do not use the UHE not for motors, pumps or GSM modules with frequent transmission – the voltage would drop (passivation effect).Why does the voltage drop at the beginning?Lithium thionyl chloride batteries (especially bobbin types like this) form a protective layer on the anode (passivation) during storage. This prevents self-discharge, but temporarily increases internal resistance. On first use, the voltage may briefly drop until the layer is "broken through" by the current flow.Can I use this battery instead of a normal mono battery (type D)?No, definitely not! Normal mono batteries (alkaline) have 1.5 volts. This industrial battery has 3.6 volts. If you insert this battery into a torch, radio or toy, the electronics will be instantly destroyed by the more than double voltage.Is the battery rechargeable?No. This is a non-rechargeable primary battery. Never charge it, never throw it into a fire, and do not open it by force. Please dispose of it only via official collection points for lithium batteries.
The Ultralife UHR-ER14505-H is an industrial high-performance primary battery in the widely used AA format (Mignon). Unlike standard lithium cells (bobbin type), which are optimised for low currents, this model utilises the spiral cell technology (wound electrodes). This makes it a small powerhouse that can continuously deliver high currents and strong pulses without collapse. It is the ideal power source for compact devices that need to transmit (GSM/LoRaWAN) or drive motors.Highlights at a glanceSpiral cell technology: The wound arrangement of the electrodes (similar to a roll) maximises the surface area, enabling extremely high discharge currents (up to 1000 mA continuous).Maximum pulse performance: Delivers short current pulses of up to 2000 mA, which is essential for modern radio modules in smart home or tracking devices.Standard AA format: Measuring 14.5 x 50.5 mm, it is mechanically equivalent to a normal AA battery, but delivers 3.6 volts.High safety: Features a hermetically sealed housing, a safety valve and often an integrated PTC resistor to protect against short circuit.Extreme temperature range: Can be used from freezing -55°C up to hot +85°C, ideal for outdoor sensors.Long shelf life: The self-discharge is extremely low (< 2% per year), so the battery remains storable for over 10 years.The powerhouse for IoT & sensorsWhile normal lithium AA cells (such as Saft LS14500) quickly reach their limits at high currents, this is where the UHR-ER14505-H excels. It is the perfect choice for intelligent gas and water meters (Smart Metering), GPS trackers, wireless security sensors (PIR), medical hand tools and professional torches that require 3.6V lithium cells. Features ModelUltralife UHR-ER14505-H (High Rate Spiral) ApplicationIoT, wireless sensors, smart metering (high pulse currents) TechnologyLithium thionyl chloride (Li-SOCl2) - Spiral cell design Voltage3.6 V Capacity2.0 Ah (nominal) - optimised for performance Max. discharge currentapprox. 1000 mA (pulse) / 500 mA (continuous) Dimensions (L x W x H in mm)14.5 x 50.5 (AA / Mignon size) ConnectionStandard (positive pole nipple-shaped) or solder tags Temperature range-55°C to +85°C Special featuresSpiral design for high performance, long shelf life (>10 years) Weight (g)approx. 19 FAQs about Ultralife UHR-ER14505-HWhat is the difference compared to the "normal" ER14505 (Bobbin)?The difference is huge in terms of power output.Bobbin type (e.g. Saft LS14500): Often has more capacity (approx. 2.6 Ah), but can only deliver very little current (a few mA). Ideal for memory retention.Spiral type (UHR-ER14505-H): Has slightly less capacity (approx. 2.0 Ah), but can deliver 20 times the current. If your device uses GSM, LTE or Wi-Fi, you absolutely need the spiral version (UHR), because the bobbin cell would collapse during data transmission.Can I use this battery instead of a normal AA battery?Absolutely not! A normal AA battery (alkaline) has 1.5 volts. This lithium battery has 3.6 volts. If you put this battery in a remote control, a clock or an ordinary toy, the electronics will be destroyed immediately due to the overvoltage. Use it only in devices that are explicitly designed for "3.6V Lithium AA".Is the battery rechargeable?No. It is a primary battery (single use). Never recharge it (risk of explosion). For rechargeable lithium batteries in AA size you need to look for "Li-Ion 14500" (3.7V), but this is a different technology.Do I need a safety margin when soldering?If you buy the version with solder tags: never solder directly to the battery can, only to the tags and as quickly as possible (max. 5 seconds). Excessive heat can damage the internal seals or separator and cause leakage.
The Ultralife UHR-ER34615-H is an extremely powerful primary lithium battery (lithium thionyl chloride / Li-SOCl2) in the standard size D (mono). In contrast to conventional "energy" cells (bobbin type), this model features a spiral construction (spiral cell). This special construction enormously increases the internal surface area of the electrodes, enabling the battery to deliver very high continuous currents and strong pulses. It is therefore the first choice for applications requiring short, high power peaks, such as radio transmitters, military equipment, or motor-operated valves.Highlights at a glanceSpiral Cell Technology: The wound electrode structure enables extremely high discharge currents (up to 2000 mA continuous), where standard lithium cells often fail at just a few mA.High capacity: Despite its performance-centric construction, it offers an impressive capacity of 14.5 Ah for long runtimes.Enormous pulse power: Delivers pulse currents up to 3000 mA (occasionally 4000 mA), ideal for GSM modules, alarm sirens, or pump motors.Extreme temperature range: Operates reliably from arctic -55 °C to hot +85 °C.Long shelf life: Thanks to the low self-discharge (< 2 % per year), the battery can be stored for 10 years and longer.Safety features: Equipped with a PTC (thermistor) for current limitation in short circuit conditions, as well as a safety valve and hermetic glass-to-metal seal.The power station for industry & militaryWhereas standard lithium D cells (bobbin type) are often only intended for memory backup or extremely low currents, the UHR-ER34615-H is a real workhorse. It is often used in GPS tracking systems, oceanographic buoys, military radios, smart meters with remote transmission, and medical devices (e.g. defibrillators, infusion pumps). It combines the longevity of lithium with the power of a high-current battery. Features ModelUltralife UHR-ER34615-H (High Rate Spiral) ApplicationHigh currents (smart metering, GPS tracking, wireless technology) TechnologyLithium-thionyl chloride (Li-SOCl2) - spiral cell design Voltage3.6 V Capacity14.5 Ah (nominal) Max. discharge currentapprox. 3.0 A (continuous) / 4.0 A (pulse) - high rate Dimensions (L x W x H in mm)34.2 x 61.5 (size D / mono) ConnectionStandard (positive pole nipple-shaped) or solder tags Temperature range-55°C to +85°C Special featuresSpiral construction for high performance, long shelf life (>10 years) Weight (g)approx. 105 FAQs for Ultralife UHR-ER34615-HWhat is the difference to the UHE-ER34615?This is the crucial difference!UHE-ER34615 (Energy / Bobbin): Has more capacity (19 Ah), but delivers only very little current (max. approx. 100-200 mA). Ideal for long-term applications with minimal consumption.UHR-ER34615 (Power / Spiral): Has slightly less capacity (14.5 Ah), but delivers an extremely high current (max. 2000-3000 mA). If your device moves motors or transmits (GSM/LTE), you absolutely need the UHR version (spiral). The UHE version would immediately collapse in voltage.Is this battery rechargeable?No. This is a primary lithium battery. Never attempt to charge this battery. There is an explosion hazard. Because of the high energy density, it should also not be forcibly opened or burned.Do I need a protection resistor?The battery already includes an internal PTC (Positive Temperature Coefficient), which acts as a reversible fuse. In the event of an external short circuit, the PTC increases its resistance and limits the current to prevent overheating. Nevertheless, appropriate fusing should be included in the circuit, since the battery can release very large amounts of energy.Why does it have 3.6V and not 1.5V?This is a lithium industrial battery, not a normal alkaline battery. It has a nominal voltage of 3.6 volts (instead of 1.5 V). It must never under any circumstances be inserted into regular devices (such as torches or radios) that are designed for 1.5V batteries, as the double voltage would immediately destroy the electronics.
The VARTA CR1/2AA is a high-performance 3-volt lithium primary battery that has been developed for professional and industrial applications with the highest demands on longevity and reliability. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and a very wide operating temperature range. As a loose cell, it is the ideal energy source for the initial equipment (OEM) of long-lasting electronic devices.Highlights at a glanceExtreme longevity: Up to 10 years shelf life thanks to extremely low self-discharge.High energy density: Maximum energy in a compact design for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.Stable voltage: Constant 3-volt voltage over almost the entire battery life.Industrial top quality: Developed and manufactured for demanding OEM applications and safety-relevant electronics.Reliable energy for long-term applicationsThe VARTA CR1/2AA is the preferred energy source for "fit and forget" applications where a battery change is not intended for years. Its main field of application is the supply of memory chips (SRAM/CMOS backup) and real-time clocks (RTC) in industrial PCs and controllers (PLCs). It is also ideal for use in the metering industry (smart metering for water, gas, electricity), in safety sensors, automotive sector, and medical technology.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a very high nominal voltage of 3 volts and an extremely low self-discharge rate of less than 1% per year at room temperature. This guarantees maximum operational readiness even after many years of storage. The technology is also known for its high safety and reliability.Developed for industrial integrationAs a highly specialised single cell, the CR1/2AA is optimised for industrial processing and assembly into battery solutions. Its robust construction and high quality ensure process-safe integration into end devices. With this cell, VARTA offers developers and manufacturers a reliable and high-performance platform for developing long-lasting and low-maintenance products. Features Model VARTA Lithium Battery CR1/2AA Battery type Lithium manganese dioxide (Li-MnO2) Nominal voltage (V) 3.0 Capacity (mAh) 950 Diameter (mm) 14.75 Height (mm) 25.1 Weight (g) 11.5 FAQs about the VARTA Lithium Battery CR1/2AAWhat is the main advantage of this lithium battery?The key advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. It reliably provides energy over many years and is therefore ideal for maintenance-free devices in which the battery is permanently installed.Is this battery rechargeable?No. This is a lithium primary battery. It must not, under any circumstances, be attempted to be recharged. Attempts to charge are extremely dangerous and may lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the CR1/2AA is usually configured with welded solder pins or solder tabs in order to then solder it securely to a circuit board. It can also be used in special battery holders.What is a 3-volt battery of this size needed for?It is mainly used for buffering memories and real-time clocks in computers and industrial controllers (PLCs). The 3-volt voltage is perfectly matched to the requirements of many common microchips and memory modules.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly disposal.
The VARTA CR1/2AA with solder tabs (LF) is a high-performance, industrially assembled 3-volt lithium primary battery. It has been developed for professional applications that require an extremely durable and reliable power source with a connection type optimized for direct PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and is the ideal energy source for the original equipment (OEM) of long-life electronic devices.Highlights at a glanceIndustrial assembly: Equipped with robust solder tabs for easy and secure PCB mounting.Extreme longevity: Up to 10 years shelf life thanks to extremely low self-discharge.High energy density: Maximum energy in a compact design for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.Stable voltage: Constant 3-volt voltage over almost the entire service life of the battery.Reliable energy for long-term applicationsThe assembled VARTA CR1/2AA is the preferred energy source for "fit and forget" applications where the battery is permanently soldered to a PCB. Its main area of use is to supply memory modules (SRAM/CMOS backup) and real-time clocks (RTC) in industrial PCs and controllers (PLCs). In addition, it is ideal for use in the utility meter industry (smart metering), in safety sensors, in automotive applications and in medical technology.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a very high nominal voltage of 3 volts and an extremely low self-discharge rate of less than 1% per year at room temperature. This guarantees maximum operational readiness even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CR1/2AA with solder tabs is optimised for efficient and reliable machine or manual placement on printed circuit boards. The robust, permanently welded solder tabs ensure a permanently secure and vibration-resistant solder connection. With this cell, VARTA offers developers and manufacturers a reliable and easily integrable platform for the development of long-life and low-maintenance products. Characteristics Model VARTA lithium battery CR1/2AA with solder tabs Battery type Lithium manganese dioxide (Li-MnO2) Rated voltage (V) 3.0 Capacity (mAh) 970 Diameter (mm) 14.75 Height (mm) 25.1 Weight (g) 11.5 Connection Solder tabs FAQs about the VARTA lithium battery CR1/2AA with solder tabsWhat does "LF" or "with solder tabs" mean?"LF" stands for "solder tab". This means that metal strips (tabs) are already factory-welded to the positive and negative terminals of the battery. These solder tabs make it much easier to solder the battery directly onto a PCB and provide a more reliable connection than manual wire terminals.What is the main advantage of this lithium battery?The key advantage is the extremely long service and shelf life of up to 10 years, combined with a very wide operating temperature range. The pre-mounted solder tabs also simplify the manufacturing process, as no separate welding of contacts is required.Is this battery rechargeable?No. This is a lithium primary battery. It must under no circumstances be recharged. Attempts to charge are extremely dangerous and may result in fire or explosion.For which soldering methods is this assembled cell suitable?This cell is intended for hand and wave soldering. Use in reflow soldering is not recommended as the high temperatures may damage the cell. Please refer to the manufacturer's processing instructions.How must this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the regulations of the Battery Act. Please take the empty battery to the appropriate industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The VARTA CR1/2AA with axial connection wires is a high-performance, industrially assembled 3-volt lithium primary battery. It has been developed for professional applications that require an extremely durable and reliable power source with a connection type optimised for PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and is the ideal energy source for the original equipment (OEM) of long-life electronic devices.Highlights at a GlanceIndustrial assembly: Equipped with robust, axial connection wires for simple and safe PCB mounting.Extreme longevity: Up to 10 years shelf life thanks to extremely low self-discharge.High energy density: Maximum energy in a compact format for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.Stable voltage: Constant 3-volt voltage over almost the entire service life of the battery.Reliable energy for long-term applicationsThe assembled VARTA CR1/2AA is the preferred power source for "fit and forget" applications where the battery is permanently soldered onto a PCB. Its main area of application is the supply of memory modules (SRAM/CMOS backup) and real-time clocks (RTC) in industrial PCs and controllers (PLCs). It is also ideally suited for use in the metering industry (smart metering), in security sensors, in the automotive sector and in medical technology.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the outstanding performance of this cell. It enables a very high nominal voltage of 3 volts and an extremely low self-discharge rate of less than 1% per year at room temperature. This guarantees maximum readiness for use even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CR1/2AA with axial connections is optimised for efficient and process-safe machine or manual mounting of PCBs. The robust connection wires provide a permanently secure and vibration-resistant soldered connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of durable, low-maintenance products. Features Model VARTA lithium battery CR1/2AA with axial connections Battery type Lithium manganese dioxide (Li-MnO2) Rated voltage (V) 3.0 Capacity (mAh) 970 Diameter (mm) 14.75 Height (mm) 25.1 Weight (g) 11.5 Connection Axial connections FAQs about the VARTA lithium battery CR1/2AA with axial connectionsWhat does "axial connections" mean?Axial connections are connecting wires that are led out from the centre of the two flat ends (terminals) of the cylindrical cell, i.e. along the longitudinal axis of the battery. This configuration is ideal for horizontal mounting and for inserting the wires through holes in a printed circuit board (Through-Hole Technology, THT).What is the main advantage of this lithium battery?The key advantage is the extremely long life and storage duration of up to 10 years, combined with a very wide operating temperature range. The pre-attached connection wires also simplify the manufacturing process, as no separate spot welding of contacts is necessary.Is this battery rechargeable?No. This is a lithium primary battery. Under no circumstances should you attempt to recharge it. Recharging attempts are extremely dangerous and can lead to fire or explosion.For which soldering procedures is this assembled cell suitable?This cell is intended for hand and wave soldering. Use in reflow soldering is not recommended, as the high temperatures can damage the cell. Please refer to the manufacturer's processing notes.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please hand in the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The VARTA CR2/3AA is a high-performance 3-volt lithium primary battery developed for professional and industrial applications with the highest requirements for longevity and reliability. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and a very wide operating temperature range. As a loose cell, it is the ideal energy source for the initial equipment (OEM) of durable and low-maintenance electronic devices.Highlights at a glanceExtreme longevity: Up to 10 years of storage thanks to extremely low self-discharge.High energy density: Maximum energy in a compact form for prolonged autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High capacity: 1.35 Ah for energy-intensive applications with long run time requirements.Industrial top quality: Developed and manufactured for demanding OEM applications and safety-relevant electronics.Reliable energy for long-term applicationsThe VARTA CR2/3AA is the preferred power source for "fit and forget" applications where battery replacement is not planned for years. Its main area of use is for supplying security sensors (e.g. in alarm systems), smart meters (smart metering for water, gas, electricity), industrial control systems (PLC) and the backup of memory modules (SRAM/CMOS backup). It is the optimal solution for all self-sufficient, wireless devices.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the outstanding performance of this cell. It enables a high nominal voltage of 3 volts and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum serviceability even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs a highly specialised single cell, the CR2/3AA is optimised for industrial further processing and assembly into battery solutions. Its robust construction and high quality ensure reliable integration into end devices. VARTA offers developers and manufacturers a reliable and powerful platform for the development of durable and low-maintenance products with this cell. Characteristics Model VARTA Lithium Battery CR2/3AA Battery type Lithium manganese dioxide (Li-MnO2) Rated voltage (V) 3.0 Capacity (mAh) 1350 Diameter (mm) 14.75 Height (mm) 33.5 Weight (g) 17.0 FAQs about the VARTA Lithium Battery CR2/3AAWhat is the main advantage of this lithium battery?The crucial advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. It supplies reliable energy for many years and is therefore ideal for maintenance-free devices in which the battery is permanently built in.Is this battery rechargeable?No. This is a lithium primary battery. It must never be attempted to recharge it under any circumstances. Charging attempts are extremely dangerous and can lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the CR2/3AA is usually assembled with attached solder pins or solder tabs to then be safely soldered onto a circuit board. It can also be used in special battery holders.What does the size designation "2/3 AA" mean?This means that the cell has the same diameter as a standard AA battery, but only about two thirds of its height. This compact form allows use in space-critical applications.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the respective designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The VARTA CR2/3AA with 3 solder pins (+2 pin / -1 pin) is a high-performance, industrially assembled 3-volt lithium primary battery. It has been developed for professional applications that require an extremely durable and reliable power source with a reverse polarity-protected connection type for PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers a high energy density, extremely low self-discharge and is the ideal energy source for the original equipment (OEM) of long-lasting and low-maintenance electronic devices.Highlights at a glanceReverse polarity-proof assembly: Equipped with 3 solder pins (+2 pin / -1 pin) for error-free and secure PCB mounting.Extreme durability: Can be stored for up to 10 years thanks to extremely low self-discharge.High energy density: Maximum energy in a compact design for long-lasting self-sufficiency.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High capacity: 1.35 Ah for energy-intensive applications with long runtime requirements.Reliable energy for long-term applicationsThe pre-assembled VARTA CR2/3AA is the preferred energy source for "fit and forget" applications where the battery is permanently soldered onto a printed circuit board. Its main area of application is the supply of memory modules (SRAM/CMOS backup) and real-time clocks (RTC) in industrial PCs and programmable logic controllers (PLCs). Furthermore, it is ideal for use in the metering industry (smart metering), in safety sensors, in the automotive sector and in medical technology.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts and an extremely low self-discharge rate of less than 1% per year at room temperature. This guarantees maximum service readiness even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CR2/3AA with 3 solder pins is optimised for efficient and process-safe automatic or manual assembly of printed circuit boards. The asymmetrical pin arrangement prevents assembly errors and ensures a permanently secure and vibration-resistant solder connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of long-lasting and low-maintenance products. Features Model VARTA lithium battery CR2/3AA with 3 solder pins Battery type Lithium manganese dioxide (Li-MnO2) Nominal voltage (V) 3.0 Capacity (mAh) 1350 Diameter (mm) 14.75 Height (mm) 33.5 Weight (g) 17.0 Connection 3 solder pins FAQs about the VARTA lithium battery CR2/3AA with 3 solder pinsWhat does the designation "SLF +2Pin / -1Pin" mean?"SLF" usually stands for "Solder Pin". The designation "+2Pin / -1Pin" describes the specific, asymmetrical arrangement of the solder pins: The positive pole is provided with two pins and the negative pole with one pin. This serves as mechanical reverse polarity protection during PCB mounting and increases process reliability in production.What is the main advantage of this lithium battery?The key advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. The pre-attached, reverse polarity-proof solder pins also simplify the manufacturing process and increase the reliability of the end product.Is this battery rechargeable?No. This is a lithium primary battery. It must never be recharged under any circumstances. Attempting to charge is extremely dangerous and can lead to fire or explosion.For which soldering methods is this pre-assembled cell suitable?This cell is intended for hand and wave soldering. Use in the reflow soldering process is not recommended as the high temperatures can damage the cell. Please observe the manufacturer's processing instructions.How must this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The VARTA CR2/3AA with axial connection wires is a high-performance, industrially assembled 3-volt lithium primary battery. It has been developed for professional applications that require an extremely durable and reliable energy source with a connection type optimised for printed circuit board mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and is the ideal energy source for the initial equipment (OEM) of long-lasting and low-maintenance electronic devices.Highlights at a glanceIndustrial assembly: Equipped with robust, axial connection wires for simple and secure PCB mounting.Extreme longevity: Up to 10 years storage due to extremely low self-discharge.High energy density: Maximum energy in a compact form for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High capacity: 1.35 Ah for energy-intensive applications requiring long runtimes.Reliable energy for long-term applicationsThe assembled VARTA CR2/3AA is the preferred energy source for "fit and forget" applications, where the battery is permanently soldered onto a printed circuit board. Its main area of application is supplying security sensors, smart meters (smart metering), industrial control systems (PLC), as well as providing backup for memory modules (SRAM/CMOS backup). It is the optimum solution for all self-sufficient, wireless devices where maximum reliability is required.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to this cell’s exceptional performance. It enables a high nominal voltage of 3 volts and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum readiness even after many years in storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CR2/3AA with axial connections is optimised for efficient and reliable machine or manual mounting of printed circuit boards. The robust connection wires ensure a permanently secure and vibration-resistant soldered connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for developing long-lasting and low-maintenance products. Characteristics Model VARTA lithium battery CR2/3AA with axial connections Battery type Lithium manganese dioxide (Li-MnO2) Nominal voltage (V) 3.0 Capacity (mAh) 1350 Diameter (mm) 14.75 Height (mm) 33.5 Weight (g) 17.0 Connection Axial connections FAQs about the VARTA lithium battery CR2/3AA with axial connectionsWhat does "axial connections" mean?Axial connections are connecting wires that are led out from the centre of the two flat ends (poles) of the cylindrical cell, i.e. along the longitudinal axis of the battery. This configuration is ideal for horizontal mounting and for inserting the wires through holes in a printed circuit board (Through-Hole Technology, THT).What is the main advantage of this lithium battery?The key advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. The already attached connection wires additionally simplify the manufacturing process as there is no longer any need for separate spot welding of contacts.Is this battery rechargeable?No. This is a lithium primary battery. Under no circumstances should it be attempted to recharge it. Attempting to charge is extremely dangerous and can result in fire or explosion.For which soldering methods is this assembled cell suitable?This cell is intended for hand and wave soldering. Use in the reflow soldering process is not recommended as the high temperatures can damage the cell. Please refer to the manufacturer’s processing instructions for details.How should this battery be disposed of?Batteries must not be disposed of as household waste. As an industrial battery, it is subject to the requirements of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The VARTA CRAA is a high-performance 3-volt lithium primary battery in AA size, developed for professional and industrial applications with the highest requirements for longevity and reliability. Based on lithium-manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge, and a very wide operating temperature range. As a loose cell ("bulk"), it is the ideal energy source for the initial equipment (OEM) of durable and low-maintenance electronic devices.Highlights at a glanceExtreme longevity: Up to 10 years storage life thanks to extremely low self-discharge.High capacity: Provides a very high energy reserve for long-lasting autonomy in the AA format.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High energy density: Maximum energy for demanding applications with long runtime requirements.Industrial top quality: Developed and manufactured for demanding OEM applications and safety-related electronics.Reliable energy for long-term applicationsThe VARTA CRAA is the preferred energy source for "fit and forget" applications where a battery change is not intended for years. Its main area of use is powering smart meters (smart metering for water, gas, electricity), industrial controllers (PLC), safety sensors, alarm systems, and the buffering of memory components (SRAM/CMOS backup) in professional electronics.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the outstanding performance of this cell. It allows a high nominal voltage of 3 volts and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum readiness for operation even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs a highly specialised individual cell, the CRAA is optimised for industrial processing and assembly into battery solutions. Its robust construction and high quality ensure process-safe integration into end devices. With this cell, VARTA offers developers and manufacturers a reliable and powerful platform for the development of durable and low-maintenance products. Features Model VARTA Lithium round cell CRAA Battery type Lithium-manganese dioxide (Li-MnO2) Nominal voltage (V) 3.0 Capacity (mAh) 2000 Diameter (mm) 14.75 Height (mm) 50.5 Weight (g) 21.5 FAQs about the VARTA Lithium Battery CRAAWhat is the main advantage of this lithium battery?The key advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. It provides reliable energy for many years and is therefore ideal for maintenance-free devices where the battery is permanently installed.Is this battery rechargeable?No. This is a lithium primary battery. It must not be recharged under any circumstances. Attempts to charge are extremely dangerous and can lead to fire or explosion.What is the difference to a normal 1.5V AA battery (alkaline or lithium)?The main difference is the voltage. This CRAA cell has a nominal voltage of 3 volts, whereas standard AA batteries have 1.5 volts. It is therefore not suitable as a direct replacement for 1.5V batteries and may only be used in devices that are explicitly designed for the 3-volt lithium type CRAA.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly disposal.
The VARTA CRAA with U-solder tabs (LF-U) is a high-performance, industrially assembled 3-volt lithium primary battery in AA format. It was developed for professional applications that require an extremely durable and reliable energy source with a connection type optimized for direct PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers a high capacity of 2Ah, extremely low self-discharge and is the ideal energy source for the initial equipment (OEM) of long-life and low-maintenance electronic devices.Highlights at a glanceIndustrial assembly: Equipped with robust U-solder tabs for easy and secure PCB mounting.Extreme longevity: Up to 10 years storage life due to extremely low self-discharge.High capacity: With 2 Ah, it offers a very high energy reserve for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High 3V voltage: Ideal for modern electronic circuits in AA format.Reliable energy for long-term applicationsThe assembled VARTA CRAA is the preferred energy source for "fit and forget" applications where the battery is permanently soldered to a PCB. Its main areas of use are powering smart meters (smart metering for water, gas, electricity), industrial controllers (PLC), safety sensors, alarm systems, and the buffering of memory modules (SRAM/CMOS backup) in professional electronics.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts in the popular AA format and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum readiness for use even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CRAA with U-solder tabs is optimized for efficient and process-safe machine or manual placement of PCBs. The robust, U-shaped solder tabs ensure a permanently secure and vibration-resistant solder connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of durable and low-maintenance products. Characteristics Model VARTA lithium round cell CRAA with U-solder tabs Battery type Lithium manganese dioxide (Li-MnO2) Rated voltage (V) 3.0 Capacity (mAh) 2000 Diameter (mm) 14.75 Height (mm) 50.5 Weight (g) 21.5 Connection U-solder tabs FAQs on the VARTA lithium battery CRAA with U-solder tabsWhat does "LF-U" or "U-solder tabs" mean?"LF" stands for "solder tab". The addition "U" describes the shape of the metal strips welded to the poles, which are bent like a "U". This configuration facilitates soldering the battery to a PCB (printed circuit board) and ensures a particularly stable mechanical connection.Is this battery rechargeable?No. This is a lithium primary battery. It must by no means be recharged. Attempting to recharge is extremely dangerous and may lead to fire or explosion.Can I use this battery as a replacement for a standard 1.5V AA battery?No, absolutely not. This CRAA cell has a rated voltage of 3 volts, whereas standard AA batteries (alkaline, lithium, NiMH) have 1.5 volts. It may only be used in devices explicitly designed for the 3-volt lithium CRAA type, as the higher voltage would destroy other devices.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the regulations of the Battery Act. Please take the empty battery to the appropriate industrial or municipal collection points to ensure correct and environmentally friendly recycling.
The VARTA CRAA with 3 solder pins (+2 Pin / -1 Pin) is a high-performance, industrially pre-assembled 3-volt lithium primary battery in AA size. It has been developed for professional applications requiring an extremely long-lasting and reliable power source with a reverse-polarity safe connection for PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers a high capacity of 2Ah, extremely low self-discharge and is the ideal power source for the initial equipment (OEM) of long-lasting and low-maintenance electronic devices.Highlights at a glanceReverse-polarity-safe assembly: Equipped with 3 solder pins (+2 Pin / -1 Pin) for error-free and safe PCB mounting.Extreme durability: Up to 10 years storage capability due to extremely low self-discharge.High capacity: With 2 Ah, provides a very high energy reserve for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40°C to +85°C.High 3V voltage: Ideal for modern electronic circuits in AA size.Reliable energy for long-term applicationsThe pre-assembled VARTA CRAA is the preferred power source for "fit and forget" applications where the battery is permanently soldered onto a printed circuit board. Its main application is the power supply for smart meters (smart metering for water, gas, electricity), industrial control systems (PLC), safety sensors, alarm systems, and the backup of memory modules (SRAM/CMOS backup) in professional electronics.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts in the common AA size and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum readiness for use even after many years in storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CRAA with 3 solder pins is optimised for efficient and process-reliable mechanical or manual assembly of PCBs. The asymmetric pin arrangement prevents assembly errors and ensures a permanently secure and vibration-resistant solder joint. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of long-life and low-maintenance products. Characteristics Model VARTA lithium cylindrical cell CRAA with 3 solder pins Battery type Lithium manganese dioxide (Li-MnO2) Nominal voltage (V) 3.0 Capacity (mAh) 2000 Diameter (mm) 14.75 Height (mm) 50.5 Weight (g) 21.5 Connection 3 solder pins FAQs for the VARTA lithium battery CRAA with 3 solder pinsWhat does the information "SLF +2Pin / -1Pin" mean?"SLF" usually stands for "Solder Pin". The indication "+2Pin / -1Pin" describes the specific, asymmetrical arrangement of the solder pins: the positive terminal is fitted with two pins and the negative terminal with one pin. This serves as a mechanical reverse-polarity protection when mounting on the PCB and increases process reliability in manufacturing.Is this battery rechargeable?No. This is a lithium primary battery. It must not under any circumstances be recharged. Attempts to charge it are extremely dangerous and can lead to fire or explosion.Can I use this battery as a replacement for a standard 1.5V AA battery?No, absolutely not. This CRAA cell has a nominal voltage of 3 volts, whereas standard AA batteries (alkaline, lithium, NiMH) have 1.5 volts. It may only be used in devices that are explicitly designed for the 3-volt lithium CRAA type, as the higher voltage would destroy other devices.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the regulations of the Battery Act. Please take the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly disposal.
The VARTA CRAA with axial connection wires is a high-performance, industrially pre-assembled 3-volt lithium primary battery in AA size. It has been developed for professional applications that require an extremely durable and reliable power source with a connection type optimised for PCB mounting. Based on lithium-manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and is the ideal power source for the initial equipment (OEM) of long-life and low-maintenance electronic devices.Highlights at a glanceIndustrial assembly: Equipped with robust, axial connection wires for simple and secure PCB mounting.Extreme longevity: Up to 10 years shelf life thanks to extremely low self-discharge.High capacity: Provides a very high energy reserve of 2000 mAh for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40°C to +85°C.High 3V voltage: Ideal for modern electronic circuits in AA size.Reliable energy for long-term applicationsThe pre-assembled VARTA CRAA is the preferred power source for "fit and forget" applications, where the battery is permanently soldered onto a printed circuit board. Its main field of application is supplying smart meters (smart metering for water, gas, electricity), industrial controllers (PLC), security sensors, alarm systems and the backup of memory modules (SRAM/CMOS backup) in professional electronics.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to this cell's outstanding performance. It enables a high nominal voltage of 3 volts in the common AA size and an extremely low self-discharge of less than 1% per year at room temperature. This ensures maximum readiness for use even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Designed for industrial integrationAs an industrially pre-assembled cell, the CRAA with axial terminals is optimised for efficient and reliable machine or manual placement on PCBs. The robust connection wires ensure a permanently secure and vibration-proof soldered connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of durable and low-maintenance products. Features Model VARTA lithium round cell CRAA with axial connections Battery type Lithium manganese dioxide (Li-MnO2) Rated voltage (V) 3.0 Capacity (mAh) 2000 Diameter (mm) 14.75 Height (mm) 50.5 Weight (g) 21.5 Connection Axial connections FAQs on the VARTA lithium battery CRAA with axial connectionsWhat does "axial wire" mean?Axial connection wires are wires that are routed centrally from both flat ends (poles) of the cylindrical cell, i.e. along the longitudinal axis of the battery. This configuration is ideal for horizontal mounting and for passing the wires through holes in a PCB (Through-Hole Technology, THT).Is this battery rechargeable?No. This is a lithium primary battery. Under no circumstances should it be attempted to recharge it. Charging attempts are extremely dangerous and may cause fire or explosion.Can I use this battery as a replacement for a normal 1.5V AA battery?No, definitely not. This CRAA cell has a nominal voltage of 3 volts, whereas standard AA batteries (alkaline, lithium, NiMH) have 1.5 volts. It should only be used in devices that are explicitly designed for the 3-volt lithium type CRAA, as the higher voltage would destroy other devices.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please return the empty battery to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.
The Energizer Ultimate Lithium L92 (size AAA / Micro) in a practical 2-pack blister is the ideal packaging unit for devices that need to be fitted in pairs, such as PC mice, small LED torches, or outdoor sensors. It is considered the world's longest-lasting AAA battery in high-tech devices. Thanks to the superior lithium iron sulphide chemistry (LiFeS2), it offers extremely stable voltage, is leak-proof, and withstands extreme temperatures where conventional alkaline batteries fail long before.Highlights at a glanceWorld's longest-lasting AAA battery: Offers unmatched performance in energy-intensive devices and, for example, lasts up to 11 times longer in digital cameras than standard alkaline batteries.20 years shelf life: The extremely low self-discharge guarantees that the batteries are still ready for use even after two decades of storage – perfect for emergency equipment.Extreme temperature range: Can be used from Siberian -40 °C to desert-like +60 °C, making it the only reliable choice for outdoor sensors in winter.Ultra-light: Weighs about 33% less than an alkaline battery (approx. 7.6 g vs. 11.5 g), making it perfect for headlamps and portable GPS equipment where every gram counts.Leak-proof: The construction prevents electrolyte leakage, protecting expensive electronics from corrosion damage.100% compatible: Despite the high-performance chemistry, it has 1.5 volts and the exact dimensions of a standard AAA battery, so it can replace any regular “micro” battery.Ideal for outdoor sensors & gamingThis 2-pack is perfectly sized for optical gaming mice (e.g. Logitech G-Series, Razer), which can be moved lighter and faster with the reduced battery weight. It is also standard for outdoor thermometers, Blink cameras (many models use 2x 1.5V Lithium AA or AAA) and professional LED penlights (penlights) that are left in cars during winter. Features ModelEnergizer Ultimate Lithium L92 (2-pack blister) ApplicationWeather stations (outdoor), mice, photo flash (small devices) TechnologyLithium iron sulphide (LiFeS2) - Primary (Not rechargeable!) Voltage1.5 V (high voltage stability) RuntimeWorld's longest service life in high-tech devices Shelf life20 years (no self-discharge issues) Dimensions (L x W x H in mm)44.5 x 10.5 (Standard AAA / Micro / FR03) Temperature range-40 °C to +60 °C (The winter specialist) Packaging unit2 units in blister (L92ULTIMATEB2) Special featuresLeak-proof, ultra-light (-33% weight), temperature resistant Weight (g)approx. 7.6 (per battery) FAQs about the Energizer Ultimate Lithium L92Why is this battery better for outdoor sensors?Alkaline batteries are based on a water-based liquid electrolyte. At temperatures below 0 °C, this becomes sluggish or freezes, internal resistance rises, and the battery provides no power (even when full). Energizer Lithium uses a different chemistry that remains liquid and effective even at -40 °C. It is therefore indispensable for winter weather stations.Can I put them in my DECT phones?Caution: No! Most cordless landline phones (DECT) use rechargeable batteries (NiMH AAA). If you insert this lithium battery and put the phone on the charging cradle, the base station will try to charge the battery. This can cause overheating and destruction of the battery or the phone. Always check the label of the old cells ("Rechargeable" vs. "Lithium").Why is the battery so light?Lithium is the lightest metal on earth. Compared to the heavy zinc and manganese dioxide components in an alkaline battery, the lithium construction saves about a third of the weight. In a computer mouse, this changes the centre of gravity and improves handling; in a headlamp, it reduces bouncing when running.How do I dispose of the empty battery?Because lithium is highly reactive, you should cover the terminals (+ and -) of empty batteries with a small strip of tape or insulating tape. Then put them into the green battery collection boxes in supermarkets or at recycling centres. Do not throw them in the household waste!
The Energizer Ultimate Lithium L92 (size AAA / Micro) is considered the world's longest-lasting AA battery in high-tech devices. It was developed to far outshine conventional alkaline batteries in power-intensive applications. Thanks to advanced lithium iron sulphide chemistry (LiFeS2), it not only offers up to 11 times longer runtimes in digital cameras, but also works in extreme weather conditions where normal batteries would fail. The 4-pack blister is the ideal stock size for photographers, outdoor enthusiasts and smart home owners. Highlights at a glanceThe world's longest-lasting AAA battery: Provides maximum performance for energy-hungry high-tech devices and lasts up to 11x longer in digital cameras than standard alkaline batteries.20 years shelf life: The battery hardly loses any energy during storage and is guaranteed ready for use for 20 years – perfect as an emergency supply.Extreme temperature range: Works reliably from freezing -40 °C up to hot +60 °C, making it the first choice for outdoor sensors in winter.Ultra-lightweight design: Weighs around 33% less than a comparable alkaline battery, which significantly reduces the carrying weight for portable devices (headlamps, GPS).Leakproof: The construction is designed to prevent leakage and therefore damage to expensive electronics.1.5 Volt system: Is a direct "drop-in" replacement for any standard 1.5V AAA alkaline battery, but with the superior power of lithium.Perfect for smart home & outdoorThe Energizer L92 is the insider tip for all smart home devices outdoors. It is ideal for Netatmo weather stations (outdoor modules), Blink outdoor cameras or electronic door locks (Nuki, Danalock), which are exposed to cold in winter. Normal batteries break down at sub-zero temperatures – the Energizer Lithium keeps running. Also for gaming controllers, handheld GPS (Garmin) and LED torches it's the best choice for maximum runtime. Features ModelEnergizer Ultimate Lithium L92 (4-pack blister) ApplicationHigh-tech (cameras, GPS), outdoor sensors, LED lamps TechnologyLithium iron sulphide (LiFeS2) - Primary (Not rechargeable!) Voltage1.5 V (extremely stable voltage) RuntimeUp to 9x longer than standard alkaline (in digital cameras) Shelf life20 years (at room temperature) Dimensions (L x W x H in mm)44.5 x 10.5 (Standard AAA / Micro / FR03) Temperature range-40°C to +60°C (Ideal for winter/outdoor) Packaging unit4 pieces in blister (L92ULTIMATEB4) Special featuresGuaranteed leak-proof, 33% lighter than alkaline, top performance Weight (g)approx. 7.6 (per battery) FAQs about Energizer Ultimate Lithium L92Can I recharge this battery?Absolutely not! This is the most important safety notice. The Energizer Ultimate Lithium is a primary battery (single use). If you try to charge this in a charger, it can explode or catch fire. For rechargeable batteries, please use NiMH batteries (e.g. Energizer Recharge).Why does the battery initially have over 1.7 volts?When you measure a brand new L92, the multimeter often shows 1.7 to 1.8 volts (open circuit voltage). This is normal and is absolutely harmless for 99% of all 1.5V devices. Under load, the voltage quickly settles at a very stable level of approx. 1.5 volts, which it then holds much longer than an alkaline battery (which quickly drops to 1.2 V).Can I mix lithium and alkaline batteries?No. Never mix old and new batteries and never mix different chemistries (alkaline with lithium) in one device. The more powerful lithium battery would "overrun" the weaker alkaline battery, which may result in overheating, leakage or defects. Always replace the complete set.Is the high price worth it for a TV remote?Honestly: No. For devices with extremely low power consumption (such as a TV remote control or a simple wall clock), a standard alkaline battery is more economical. The advantages of lithium technology (high current capacity, cold resistance) do not play a role there. Use the L92 for devices that require significant power or are located outdoors.