Batteries and innovative energy storage solutions - efficient and reliable for your company

The Deye SE-F5 Pro-C is a state-of-the-art 5.12 kWh battery storage module based on safe lithium iron phosphate technology (LiFePO4). As part of the "Pro" series, this 51.2V low-voltage battery has been specially developed for seamless integration with Deye hybrid inverters and other common 48V systems.The storage unit is characterised by its high energy density, the cobalt-free chemistry and the intelligent battery management system (BMS). The SE-F5 Pro-C is the ideal solution for homes and commercial applications that require reliable self-consumption optimisation (solar) or robust emergency power supply. Thanks to its modular design, capacity can be flexibly expanded from 5 kWh up to high double-digit kWh.Highlights at a glanceSafest cell chemistry (LiFePO4): Uses lithium iron phosphate, which is extremely thermally stable, does not burn, and is considered the safest lithium technology on the market.High capacity (5.12 kWh): Offers 100 Ah at 51.2 V nominal voltage in a compact enclosure, ideal for long autonomy times.Long service life (6000+ cycles): Designed for over 6000 charge/discharge cycles (at 25°C, 90% DOD), which means a usage life of well over 10–15 years.Intelligent BMS: The integrated battery management system protects against overcharging, deep discharge, overcurrent and overtemperature and ensures active cell balancing.Environmentally friendly (Cobalt Free): The battery contains no toxic cobalt at all, minimising environmental impact during manufacturing and disposal.Flexible scalability: Supports the parallel connection of up to 32 units (for some modules even up to 64) to achieve storage sizes of over 160 kWh.Easy installation: Thanks to 19-inch standard dimensions, the module is ideal for rack systems or wall mounting (with suitable brackets).Deye compatibility: Perfectly matched to Deye hybrid inverters (automatic recognition via CAN bus), but also compatible with Victron, Growatt, SMA etc. (depending on protocol).Areas of applicationThe Deye SE-F5 Pro-C is extremely versatile:Self-consumption optimisation: Storage of surplus PV electricity for the night.Emergency power systems (backup): Reliable energy source during power outages.Peak shaving: Limiting peak loads in commercial operations.Off-grid systems: Stand-alone systems without grid connection.Technology & advantagesThe SE-F5 Pro-C stands out thanks to the following technical features:LFP technology: Unlike NMC batteries, LiFePO4 does not tend towards "thermal runaway" if damaged. This makes installation in homes particularly safe.Smart communication: The BMS actively communicates with the inverter. It reports state of charge (SOC), state of health (SOH) and temperature in real time so that the inverter can dynamically adjust the charging curve.Soft-Start: Integrated precharge resistors prevent high inrush currents which could trip fuses when switching on the battery. Installation & operating instructionsCabling: Standard battery cables (often 25mm² or 35mm²) with Amphenol or M-screw connections (please check for each model!) are required to connect to the inverter. The communication cable (RJ45, CAN-Bus) is mandatory for the warranty.Addressing: When connected in parallel, batteries often have to be addressed via DIP switches (Master/Slave configuration), the Master taking over communication with the inverter.Temperature: Lithium batteries should not be charged at temperatures below 0°C. The BMS stops charging in the event of frost to protect the cells. Ideal operating range: 15°C to 30°C. Properties ModelDeye SE-F5 Pro-C (Cobalt Free) TechnologyLiFePO4 (lithium iron phosphate) Nominal Voltage51.2 V Nominal Capacity100 Ah Energy Content5.12 kWh Recommended Depth of Discharge (DOD)90% (for maximum service life) Cycle Life≥ 6000 cycles (at 25°C, 0.5C rate) CommunicationCAN 2.0 / RS485 (perfectly matched to Deye Inverter) Dimensions (W x D x H in mm)440 x 530 x 133 (standard 3U rack height) Weight (kg)approx. 45.0 kg  FAQs about the Deye SE-F5 Pro-CDoes this battery also work with other inverters?Yes. Deye uses standard protocols (Pylontech protocol etc.). The battery is compatible with many 48V low-voltage inverters (e.g. Victron Energy, Growatt, SMA Sunny Island, Solis) as long as the matching protocol is selected in the BMS or inverter. However, it delivers the best performance in the Deye ecosystem.What is the difference to the SE-G5.1 Pro?The designations (Pro, Pro-C, Pro-B) often refer to revisions in the chassis design, chip availability or certifications (e.g. UL certificates for specific markets). The key technical data (5.12 kWh, LFP) is usually the same. The "C" version is usually the latest, optimised for the European market.Can I expand the battery later?Yes, absolutely. You can always connect more modules in parallel to increase capacity. The BMS will balance charge differences between new and old modules to some extent. However, it is recommended to combine modules with a similar ageing state or to synchronise the system all at once. Scope of delivery: Deye SE-F5 Pro-C (5.12 kWh)This product is a set consisting of the inverter unit and separate battery modules.1 x Deye SE-F5 Pro-C battery moduleThe main unit with 5.12 kWh capacity, integrated battery management system (BMS) and LCD display for status indication.1 x wall bracket (mounting bracket)A mounting plate for secure wall-mounting of the battery module.1 x set of battery connection cablesIncludes typically a negative battery cable and the positive connector (or a cable pair) for connecting to the inverter.1 x RJ45 communication cableUsed for the data connection between the battery (PCS port) and the hybrid inverter.1 x earthing cable (grounding cable)A yellow-green cable for the legally required protective earth connection to the housing.1 x set of mounting materialConsisting of expansion plugs (mostly M6x100), screws (M4) and hex head screws to fix to the bracket.4 x stacking bracketsSpecial brackets for stacking several modules on the floor instead of hanging them on the wall.1 x positioning template (positioning paperboard)A cardboard template to accurately mark the drilling holes for the wall bracket.1 x operating instructions (user manual)Technical manual with installation and safety instructions.

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding private and commercial photovoltaic applications. With an enormous nominal capacity of 16 kWh (314 Ah) in just a single compact case module, this storage unit significantly minimises space requirements and installation effort.This model uses proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. In combination with the intelligent battery management system (BMS) and extensive monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for autonomous energy supply to your home or business.Highlights at a GlanceMassive storage capacity (16 kWh): With 314 Ah nominal capacity at 51.2 V, this single module provides enough energy to reliably supply large households even during longer sunless periods.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and almost completely eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large consumers such as heat pumps or wallboxes.Extreme scalability: Up to 32 units can be connected in parallel as standard for even greater energy needs. With a CAN bridge, scaling up to 64 modules is possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage unit features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Durability & efficiency: Certified for over 6,000 charge cycles (at 25°C), which ensures reliable operation for decades in daily use.Flexible installation: Despite the high weight, the case system is extremely flexible and can be installed on the wall, floor-standing, or stacked.Areas of ApplicationThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family homes: Maximises the self-consumption of PV electricity and, in combination with a hybrid inverter, provides powerful emergency power for the entire building.Commercial applications (C&I): Used to cap expensive load peaks (peak shaving) and store large PV surpluses in agricultural or commercial operations.Off-grid & island systems: Thanks to its gigantic capacity and high continuous discharge performance, provides a reliable energy source for totally off-grid properties.Installation & Safety InstructionsLogistics and weight: At 109 kg, the module is extremely heavy. Transport must always be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of site: The storage unit must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², to avoid overheating and voltage losses.Commissioning with parallel connection: When connecting several SE-F16 modules together, all units must be charged to exactly the same voltage level prior to cabling in order to avoid dangerous equalisation currents. Features  ModelDeye SE-F16 (Series C with display) Technology**LiFePO4** (lithium iron phosphate) Nominal voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Nominal capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + App (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor-mount, wall-mount or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference is in capacity and housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 offers 11.8 kWh (230 Ah) and weighs about 84 kg. Both use the same 51.2 V architecture and are designed for identical applications, but the F16 provides significantly more autonomy per installed module.What does the "C" stand for in the model name SE-F16-C?The suffix "-C" in Deye storage refers to the extended model variant, which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the case. This allows the current state of charge (SoC), cell voltages, and warnings to be read directly on the device without having to open the app.Do I necessarily need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "plug & play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. For third-party brands (such as Victron, SMA, or Solis), communication must first be configured manually using DIP switches or software settings.

The Deye SE-F12 is a state-of-the-art low-voltage energy storage system (48V / 51.2V), designed for maximum reliability and performance in residential and commercial solar installations. With an impressive nominal capacity of 11.8 kWh (approx. 230 Ah) in a single, compact housing, this storage system provides an excellent balance of high energy density and proven safety.Thanks to the long-lasting lithium iron phosphate cell chemistry (LiFePO4) and the intelligent battery management system (BMS), the SE-F12 is the ideal choice for users wanting to maximise their self-sufficiency. The enormous scalability also makes the system a flexible and future-proof investment in personal energy independence.Highlights at a glanceHigh storage capacity (11.8 kWh): Provides a massive 230 Ah at 51.2 V nominal voltage in only one module, drastically reducing cabling effort compared to smaller 5 kWh blocks.Safe LiFePO4 technology: Uses lithium iron phosphate, the safest and most thermally stable cell chemistry on the market, with no risk of thermal runaway.Powerful power handling: Allows a maximum continuous discharge current of 230 A (approx. 11.5 kW output) and peak currents of up to 280 A for 10 seconds – ideal for large loads such as heat pumps or EV charging stations.Extreme scalability: The system grows with your requirements. Up to 32 units can be connected in parallel as standard (with CAN bridge even up to 64 units for up to 18 MWh storage capacity).Smart monitoring: Equipped with LED status indicators, as well as Bluetooth, RS485 and CAN2.0. Seamless integration into the Deye app enables precise real-time monitoring via smartphone.Long service life: Certified for more than 6,000 cycles (at 80% depth of discharge / DoD), equivalent to a service life of 15+ years with daily charging and discharging.Flexible installation: Certified to IP21, the housing supports both wall mounting and floor-standing (stacked) installation to optimally utilise the space in the plant room.Areas of applicationThe Deye SE-F12 is extremely versatile and is mainly suitable for:Single-family houses: To maximise self-consumption and as a robust emergency power storage solution when combined with hybrid inverters.Commercial installations (C&I): For peak shaving (reducing peak loads) and storing large PV yields in agricultural or commercial businesses.Off-grid systems: The high continuous load capacity easily serves stand-alone island systems with large inrush currents.Installation & safety instructionsTransport and handling: With a weight of 84 kg the module is extremely heavy. Ensure you move it to the cellar or utility room with two people or suitable lifting equipment (e.g. stair climber).Temperature management: Although the storage operates over a wide range (-20°C to 55°C when discharging), for maximum lifetime and capacity yield it should be installed in a frost-free, dry room (15°C to 25°C). Charging below 0°C is blocked by the integrated BMS for safety reasons.Cable dimensioning: To transmit the enormous maximum continuous current of 230 A without voltage loss or dangerous heat generation, high-quality battery cables with a cross-section of at least 70 mm² (better 95 mm²) between the storage and busbar or inverter are indispensable.Compatibility: The system natively “speaks” the Deye protocol and works best plug & play with Deye low-voltage hybrid inverters (e.g. the SUN-10K or 12K-SG04LP3 series). Features  ModelDeye SE-F12 Technology**LiFePO4** (lithium iron phosphate) Nominal voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Nominal capacity**230 Ah** Nominal energy**11.8 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 80% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + App connection Dimensions (W x D x H)approx. 400 x 232 x 583 mm Weightapprox. **84 kg** Type of installationFloor standing, wall mounted or stacked  FAQs about the Deye SE-F12Can I use this battery with an inverter from another brand?Basically yes. The Deye SE-F12 uses common communication protocols (CAN/RS485) and can often also be operated with compatible third-party brands such as Victron, Solis or Growatt. However, the correct BMS protocol must be manually configured on the battery (via software or DIP switch).What happens if there's a power outage at home?If you combine the SE-F12 with a backup-capable hybrid inverter (such as the Deye SG04 series), the system switches to battery operation within milliseconds during a grid failure. Thanks to the high discharge performance (up to 11.5 kW from just one battery), you can continue to supply large three-phase loads in your home's electrical system without difficulty.Why do some shops list "SE-F12-C"?The suffix "-C" usually refers to the latest model revision (often the EU version), which is equipped with an integrated LCD display on the front of the casing. This allows cell voltages and SoC to be read directly. The pure performance data for the standard SE-F12 are identical.