Escape route lights

The Beltrona X8-30CS is a modern and durable LED emergency exit sign luminaire, specifically designed for connection to central battery systems (CPS/ZSV). It serves to clearly and compliantly mark escape routes in commercial and public buildings. With a standard-compliant viewing distance of 30 metres and a flexible pictogram set, the X8-30CS is the ideal, low-maintenance solution for centrally monitored emergency lighting systems in larger premises.Highlights at a glanceFor central battery systems: Designed for direct connection to central emergency power supply systems.Centrally monitored: Enables continuous monitoring of the luminaire function via the central battery system.Standard-compliant safety: 30 metre viewing distance in accordance with DIN EN 1838, ideal for large rooms and long corridors.No battery replacement in the luminaire: Maximum reduction of on-site maintenance and increased service life.Flexible in use: Includes 4 standard pictograms (left/right/down arrow and a blank pictogram).Versatile installation: Suitable for easy wall and ceiling installation.Reliability and safety in the systemThe Beltrona X8-30CS was developed to meet the strict European safety requirements for emergency lighting systems (including in accordance with EN 60598-2-22). By connecting to a central battery system, constant monitoring of each individual luminaire in the system is ensured, providing the highest level of operational safety. The bright and uniform illumination of the pictogram ensures a viewing distance of 30 metres for safe escape route planning in assembly areas, warehouses and spacious public areas.Cost-effectiveness through centralised maintenanceThe key advantage of the X8-30CS lies in its enormous cost-effectiveness during operation. As the luminaire has no battery of its own, the time-consuming and cost-intensive replacement of individual batteries in each luminaire is eliminated. All maintenance of the energy storage system is concentrated on the central emergency power supply system. The monitoring of the luminaire function is also carried out centrally, which drastically simplifies regular inspections and saves valuable working time for technical staff.Easy installation and flexible applicationThe X8-30CS is designed for quick and easy installation by the specialist installer. It can be mounted on both the wall and the ceiling. The scope of delivery includes a complete set of the four most common arrow pictograms as well as a blank film. This gives you as an installer or planner maximum flexibility for marking escape routes directly on site and makes the luminaire a universally applicable project item. Features  ModelBeltrona X8-30CS Product typeEmergency exit luminaire (for central battery) StandardsEN 60598-2-22, EN 1838 Viewing distance30 metres Circuit typeContinuous / standby operation (centrally controlled) Operating voltage230V AC / 216V DC Power consumptionapprox. 4 W MonitoringIndividual monitoring with address module Light sourceLED (non-replaceable) Protection ratingIP40 Mounting typeWall / ceiling surface mounting Housing materialPolycarbonate (impact-resistant) Dimensions (L/H/W, mm)330 x 220 x 50  FAQs about the Beltrona X8-30CS emergency luminaireWhat does "for central battery systems" (CS) mean?The abbreviation CS stands for "Central Supply". This luminaire does not have its own internal battery. It must be connected to a central emergency power supply system (also known as a ZSV system or CPS system) for emergency operation, which supplies all connected luminaires in the building in the event of a power failure.What is the main advantage of a centrally supplied system?The main advantage is the significantly reduced maintenance costs. The regular replacement of individual batteries in potentially hundreds of luminaires is completely eliminated. Maintenance and inspection of the energy storage system is carried out at a single, central point. This saves considerable working time and costs.Can I also use this luminaire as a normal single battery luminaire?No. This model is designed exclusively for connection to a central emergency power supply and does not have its own electronics for battery operation. It does not work in an emergency without such a system.How is the luminaire monitored?The monitoring of the individual luminaire for its function (e.g. LED fault) is usually carried out automatically via the bus system of the central battery system. Faults are reported centrally, making manual on-site inspection unnecessary.Are the pictograms included in the scope of delivery?Yes, a set with the three most common directional pictograms (left, right and down arrows) and a blank pictogram is included in the scope of delivery. This enables you to have flexible and standard-compliant signage directly during installation.

The Beltrona X8-30LFP is a modern and reliable LED emergency exit sign luminaire designed for the clear and compliant marking of escape routes in larger rooms and long corridors. It combines long-lasting LED technology with advanced lithium iron phosphate (LiFePO₄) battery technology and an automatic self-test function. With a compliant viewing distance of 30 metres and a flexible pictogram set, the X8-30LFP offers maximum safety for extensive areas.Highlights at a glanceIncreased viewing distance: 30 metres in accordance with DIN EN 1838, ideal for large rooms and long corridors.Durable LFP battery: Equipped with modern lithium iron phosphate technology for increased service life and reliability.Automatic self-test function: Reduces maintenance effort and increases operational safety through regular, independent function tests.Flexible use: Includes 4 standard pictograms (arrow left/right/down and a blank pictogram).Versatile mounting: Suitable for easy wall and ceiling installation.Selectable operation mode: Suitable for operation in maintained mode (DS) or non-maintained mode (BS).Reliability and safety in accordance with standardsThe Beltrona X8-30LFP was developed to meet the strict European safety requirements for emergency lighting systems (including EN 60598-2-22). The clear and bright illumination of the pictogram ensures an increased viewing distance of 30 metres. This enables safe planning of escape routes in large assembly areas, warehouses, long corridors, and spacious public areas. In the event of a power failure, the luminaire immediately switches to emergency mode and ensures orientation for at least 3 hours.Low-maintenance and economical thanks to modern technologyThe heart of the X8-30LFP is the long-lasting LiFePO₄ battery. Compared to conventional NiCd batteries, this technology offers a significantly longer service life, higher thermal stability and no memory effect. This reduces replacement intervals and lowers total operating costs. The integrated automatic self-test function automatically performs weekly function tests and six-monthly duration tests. The status of the luminaire is indicated via a multi-coloured LED, which significantly simplifies and accelerates the prescribed inspections.Easy installation and flexible applicationThe X8-30LFP is designed for quick and simple installation by the qualified installer. It can be mounted both on the wall and on the ceiling. The delivery includes a complete set of the four most common arrow pictograms as well as a blank foil. This gives you as the installer or planner maximum flexibility in marking escape routes directly on site, making the luminaire a universally applicable stock item. Features  ModelBeltrona X8-30LFP Product typeEmergency exit luminaire (LED) StandardsEN 60598-2-22, EN 1838 Viewing distance30 metres Operation modeMaintained / non-maintained mode (selectable) Rated operating duration3 hours Battery technologyLiFePO₄ (lithium iron phosphate) Test functionAutomatic self-test Light sourceLED (not replaceable) IP ratingIP40 Mounting typeWall / ceiling surface mounting Housing materialPolycarbonate (impact-resistant) Dimensions (L/H/W, mm)330 x 220 x 50  FAQs about the Beltrona X8-30LFP emergency luminaireWhen do I need a luminaire with a 30m viewing distance instead of 20m?A luminaire with a 30 metre viewing distance is required in areas where the distance from the viewer to the nearest emergency exit sign may be more than 20 metres. This is typically the case in long corridors, large halls (e.g. warehouses or sports halls) or spacious entrance areas, as established in the fire safety concept.What is the advantage of an LFP battery in an emergency luminaire?A lithium iron phosphate battery (LFP) has a significantly longer lifespan than conventional NiCd batteries. It is also safer, more environmentally friendly and has no memory effect. This leads to lower maintenance and replacement costs over the lifetime of the system.How does the automatic self-test function work?The luminaire automatically and regularly performs short function tests (weekly) as well as a complete duration test (every six months). The test result is indicated by a status LED (e.g. green for "OK", red for "fault"). This considerably simplifies the legally required inspection.Can I select the operation mode (maintained or non-maintained) myself?Yes, the desired operation mode can usually be simply set during installation via a jumper or a switch in the luminaire. This allows flexible use depending on building requirements and local regulations.Are the pictograms included in the scope of delivery?Yes, a set with the three most common directional pictograms (arrow left, right and down) as well as a blank pictogram is included in the scope of delivery. This allows you flexible and compliant signage directly during installation.

The Beltrona X8-20LFP is a modern and reliable LED emergency exit sign luminaire, designed for clear and compliant marking of escape routes in commercial and public buildings. It combines long-lasting LED technology with advanced lithium iron phosphate (LiFePO₄) battery and an automatic self-test function. With a standard-compliant recognition range of 20 metres and a flexible pictogram set, the X8-20LFP offers maximum safety, minimal maintenance costs and easy installation for specialist installers and building managers.Highlights at a glanceStandard-compliant safety: 20 metre recognition range in accordance with DIN EN 1838 for clear signage.Long-lasting LFP battery: Equipped with modern lithium iron phosphate technology for enhanced lifespan and reliability.Automatic self-test function: Reduces maintenance effort and increases operational safety thanks to regular, automatic function tests.Flexible in use: Includes 4 standard pictograms (arrow left/right/down as well as a blank pictogram for individual labelling).Versatile installation: Suitable for simple wall and ceiling mounting.Selectable operating mode: Suitable for continuous operation (CO) or standby operation (SO).Reliability and safety according to standardThe Beltrona X8-20LFP was developed to meet the strict European safety requirements for emergency lighting systems (including EN 60598-2-22). The clear and bright illumination of the pictogram ensures a recognition range of 20 metres, enabling safe planning of escape routes in office buildings, production facilities, schools, hotels and other public facilities. In the event of a power failure, the luminaire immediately switches to emergency mode and ensures orientation for at least 3 hours.Low-maintenance and economical thanks to modern technologyThe heart of the X8-20LFP is the long-lasting LiFePO₄ battery. Compared to conventional NiCd batteries, this technology offers a much longer service life, higher thermal stability and no memory effect. This reduces replacement cycles and lowers overall operating costs. The integrated, automatic self-test function independently carries out weekly functional tests and semi-annual endurance tests. The status of the luminaire is indicated by a multi-colour LED, which greatly simplifies and speeds up the required inspections.Easy installation and flexible applicationThe X8-20LFP is designed for quick and easy installation by specialist installers. It can be mounted both on the wall and the ceiling. The scope of delivery includes a complete set of the four most popular arrow pictograms as well as a blank film. This gives installers or planners maximum flexibility when marking escape routes directly on site and makes the luminaire a universally available stock item. Features  ModelBeltrona X8-20LFP Product typeEmergency exit luminaire (LED) StandardsEN 60598-2-22, EN 1838 Recognition range24 metres Operating modeContinuous / standby operation (selectable) Rated operating time3 hours Battery technologyLiFePO₄ (lithium iron phosphate) Test functionAutomatic self-test Light sourceLED (not replaceable) Protection classIP40 Mounting typeWall / ceiling surface mounting Housing materialPolycarbonate (impact-resistant) Dimensions (L/H/W, mm)265 x 190 x 45  FAQs about the Beltrona X8-20LFP emergency luminaireWhat is the advantage of an LFP battery in an emergency luminaire?A lithium iron phosphate battery (LFP) has a significantly longer service life than conventional NiCd batteries. It is also safer, more environmentally friendly and has no memory effect. This leads to lower maintenance and replacement costs over the service life of the system.How does the automatic self-test function work?The luminaire automatically and regularly performs short functional tests (weekly) and a full endurance test (semi-annually). The result of the test is indicated by a status LED (e.g. green for "OK", red for "fault"). This greatly simplifies the legally required inspection.Can I select the operating mode (continuous or standby operation) myself?Yes, the desired operating mode can usually be easily set during installation using a plug-in jumper or a switch in the luminaire. This enables flexible use depending on building requirements and local regulations.Are the pictograms included in the scope of delivery?Yes, the scope of delivery includes a set with the four most common direction pictograms (arrow left, right and down) as well as a blank pictogram. This enables you to provide flexible and standard-compliant signage directly during installation.Does the luminaire comply with the relevant standards for use in Germany?Yes, the luminaire is designed and tested according to the applicable European and German standards for emergency and safety lighting, such as EN 60598-2-22 and EN 1838.

This high-quality escape sign luminaire from Beltrona has been specially developed for direct wall mounting and ensures clear and compliant marking of escape and rescue routes. With a standard detection range of 27 metres, durable LED technology and a comprehensive, included pictogram set, this luminaire offers maximum flexibility and safety for professional installations in almost any building project.Highlights at a glanceOptimised for wall mounting: Ideal for installation above doors, at corridor ends, and in stairwells.Clear visibility: Guarantees a standard detection range of 27 metres in accordance with EN 1838.Flexible pictogram set: A set with 4 directional pictograms and a blank film are included.Durable LED technology: High efficiency, long service life and minimal maintenance effort.High quality: Robust housing and compliance with all relevant European standards for emergency lighting.Clear marking of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide variety of properties. Direct wall mounting is the classic installation method for marking exits or at the end of escape routes where a clear directional sign is required. It is perfect for use in office buildings, retail spaces, schools, hospitals and industrial halls.Advanced and efficient LED technologyThe heart of the luminaire is a modern LED module that ensures bright and absolutely uniform illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours, higher switching resistance and immediate full brightness in an emergency. This significantly reduces operating costs and maintenance over the entire life of the building.Designed for easy installation and flexibilityThe luminaire is designed for quick and faultless installation by the professional installer. The included pictogram set can be easily applied to the acrylic panel to flexibly define the escape route direction on site. This saves the need to stock different luminaire variants and allows on-site adaptation directly on the construction site as required. Features  ModelBeltrona LED escape sign luminaire (single battery) General luminaire data ApplicationEscape route marking Mounting typeWall surface mounting Operating modeContinuous / standby mode Detection range (m)approx. 20 Light sourceLED strip (integrated) Dimensions (W x H x D in mm)approx. 260 x 180 x 45 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs on the escape sign luminaireWhat does "detection range 27m" mean?The detection range is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is specified in the EN 1838 standard. A detection range of 27 metres is a common standard value for many areas of application.Why is a pictogram set included?A separate set offers maximum flexibility on the construction site. The final direction of the escape routes is often only clear during installation. With this set, the installer can individually adapt each luminaire to the conditions without having to carry different luminaire variants with permanently printed pictograms.What is the blank film used for?The blank film (or dummy film) serves as a placeholder or can be used to cover one side of a luminaire if required. In some cases, it is also used as a pure signal luminaire without a specific direction to generally mark an emergency exit.Can the luminaire be operated in continuous and standby mode?Yes, depending on the version, the luminaire is designed for both operating modes. With single-battery luminaires, this can often be set directly on the luminaire. For luminaires for central battery systems, the operating mode (continuous operation/DS or standby mode/BS) is set centrally in the emergency power system for the respective circuit. According to most building regulations, escape sign luminaires must be operated in continuous operation.

This high-quality escape sign luminaire from Beltrona has been specially developed for wall bracket mounting and ensures clear, double-sided visibility for marking escape and rescue routes. As a self-contained single-battery luminaire with a long-life battery and automatic test function, it offers maximum flexibility during installation and low-maintenance operation. The luminaire combines an elegant, functional design with modern LED technology and a comprehensive set of pictograms.Highlights at a glanceWall bracket mounting: Ideal for dual-sided visibility installation in long corridors, hallways and large rooms.Self-contained single-battery system: Integrated, long-lasting battery (e.g. LiFePO4) for 3 hours of emergency lighting duration.Automatic test function: Performs regular self-tests and displays the status via an LED, making maintenance easier.Clear visibility: Ensures a standard-compliant recognition range of 27 metres in accordance with EN 1838.Flexible pictogram set: A set of standard pictograms is included in delivery.Clear labelling of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide range of objects. Wall bracket mounting, where the luminaire stands perpendicular to the wall, ensures excellent visibility from both directions in corridors and hallways. It is ideal for use in office buildings, retail premises, schools and hospitals, especially in areas where easy retrofitting without connection to a central system is required.Advanced and efficient LED technologyThe core of the luminaire is a modern LED module that ensures bright and completely even illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours and lower energy consumption. This significantly reduces operating costs and maintenance over the building's entire lifetime.Designed for easy installation and minimised maintenanceThe luminaire is designed for quick and error-free installation by a professional. As it is a single-battery luminaire, only a 230V mains connection is required. The automatic test function (autotest) independently checks the function of the light source and battery at regular intervals and signals status via a multi-colour LED. This significantly reduces manual testing effort and lowers operating costs. Characteristics  ModelBeltrona LED escape sign luminaire (wall bracket) General luminaire data ApplicationEscape route signage Mounting typeWall bracket mounting Operating modePermanent / standby switching Recognition range (m)approx. 25 Light sourceLED strip (integrated) Pictogram setIncluded (arrow left/right/bottom) Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs about the escape sign luminaireWhat does "wall bracket mounting" mean?With this type of installation, the luminaire is fixed vertically to the wall with a bracket. This causes the pictogram panel to project into the room and be clearly visible from both sides, which is ideal for long corridors.What is the advantage of a single-battery luminaire with autotest?A single-battery luminaire does not require connection to a central emergency power system and is therefore very flexible in installation and ideal for retrofitting. The autotest function automates the required function tests and reports errors directly on the luminaire, which greatly simplifies regular manual inspection.What does "recognition range 27m" mean?The recognition range is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is defined in EN 1838. A recognition range of 27 metres is a common standard value for many application areas.Can the luminaire be operated in permanent and standby switching?Yes, modern single-battery luminaires are generally designed for both operating modes and can often be set directly on the luminaire. In standby switching (BS) the luminaire only switches on in the event of a power failure. In permanent switching (DS) it lights up continuously. According to most building regulations, escape sign luminaires must be operated in permanent switching. 

This high-quality emergency light from Beltrona has been specially developed for surface-ceiling mounting and ensures reliable and standard-compliant emergency lighting in the event of a power failure. As a self-contained single-battery luminaire with a long-life battery and automatic test function, it offers maximum flexibility during installation and low-maintenance operation. The luminaire combines a functional, robust design with modern LED technology and optimised lenses for illuminating escape routes or anti-panic areas.Highlights at a glanceSimple surface mounting: Ideal for direct installation on solid ceilings or in areas without suspended ceiling construction.Self-contained single-battery system: Integrated, long-life battery (e.g. LiFePO4) for an emergency lighting duration of 3 hours.Automatic test function: Carries out regular self-tests and displays the status via an LED, which simplifies maintenance.Optimised illumination: Interchangeable lenses for targeted escape route or anti-panic lighting as required.Durable LED technology: High efficiency, long service life and minimal maintenance.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for compliant emergency lighting in a wide variety of premises. Surface-ceiling mounting is perfectly suited for use in corridors, stairwells, offices, retail outlets, schools, and hospitals. It ensures that in an emergency, escape and rescue routes are clearly recognisable and panic in larger areas is avoided by providing sufficient illumination.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures high luminous efficacy with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours, greater switching resilience and instantaneous full brightness in an emergency. This significantly reduces operating costs and maintenance throughout the entire service life of the building.Designed for easy installation and minimised maintenanceThe luminaire is designed for fast and error-free installation by professional electricians. As it is a single-battery luminaire, only a 230V mains connection is required. The automatic test function (autotest) independently checks the operation of the light source and battery at regular intervals and signals the status via a multi-coloured LED. This significantly reduces manual testing and lowers operating costs. Features  ModelBeltrona LED emergency luminaire (surface ceiling mounting) General luminaire data ApplicationEscape route & anti-panic lighting Mounting typeSurface ceiling mounting Operating modeContinuous / standby mode Luminous flux (Lumen)approx. 200 Light sourceLED (integrated) Dimensions (Ø x H in mm)approx. 120 x 45 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs about the emergency luminaireWhat is the difference between escape route and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor, thus clearly defining the course of the escape route. Anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas (e.g. foyers, conference rooms) and thus makes orientation easier and helps to avoid panic.What is the advantage of a single-battery luminaire with autotest?A single-battery luminaire does not require connection to a central emergency power system and is therefore very flexible in installation and ideal for retrofitting. The autotest function automates the required function tests and reports faults directly on the luminaire, which considerably simplifies the regular manual inspection.Can the luminaire be operated in continuous and standby mode?Yes, modern single-battery luminaires are usually suitable for both operating modes and can often be set directly on the luminaire. In standby mode (BS) the emergency lighting only switches on in the event of a power failure. In continuous mode (DS) it lights up permanently and can, for example, serve as a night light in corridors.What are the advantages of modern batteries such as LiFePO4?Modern lithium iron phosphate batteries (LiFePO4) offer a significantly longer service life of up to 8 years compared to older NiCd batteries, halving maintenance intervals. In addition, they are more environmentally friendly, as they do not contain toxic heavy metals.

This robust LED emergency luminaire from Beltrona has been specially developed for chain or wire suspension in high spaces such as industrial buildings and warehouses. As a self-contained single-battery luminaire with a powerful battery and automatic test function, it offers maximum flexibility during installation and low-maintenance operation. The luminaire combines a durable housing with a high protection rating, modern LED technology and optimised lenses to guarantee standard-compliant emergency lighting even from great heights.Highlights at a glanceFlexible chain mounting: Ideal for installation in industrial halls, warehouses, supermarkets and other buildings with high ceilings.Self-contained single-battery system: Integrated, long-life battery (e.g. LiFePO4) for an emergency lighting duration of 3 hours.Automatic test function: Performs regular self-tests and displays the status via an LED, which simplifies maintenance.High protection rating: Durable housing (e.g. IP65) for protection against dust and water jets, suitable for demanding environments.Optimised for great heights: Powerful LEDs and special lenses for effective escape route or anti-panic lighting.Reliable illumination in demanding environmentsThis emergency luminaire is the ideal solution for compliant emergency lighting in spacious and high building sections. The chain mounting allows the luminaire to be suspended from high ceilings or supporting structures to the standard-compliant height. It is perfect for use in production facilities, logistics centres, DIY stores and sports halls where reliable illumination in an emergency is crucial for safe evacuation.Advanced and efficient LED technologyThe centrepiece of the luminaire is a state-of-the-art LED module that ensures maximum light output with minimum energy consumption. The powerful LEDs, in combination with specially developed lenses, guarantee that sufficient illuminance is achieved on the ground even at mounting heights of over 10 metres. The long service life of the LEDs of up to 50,000 hours significantly minimises maintenance requirements.Designed for easy installation and minimised maintenanceThe luminaire is designed for quick and error-free installation by the professional installer. Attachment is via robust eyelets for chain suspension. As it is a single-battery luminaire, only a 230V mains connection is required. The automatic test function (autotest) independently checks the function of the light source and battery at regular intervals and indicates the status via a multi-coloured LED. This significantly reduces the manual testing effort in hard-to-reach installation locations. Characteristics  ModelBeltrona LED emergency luminaire (chain mounting) General luminaire data ApplicationHall & escape route lighting Mounting typeChain suspension Operating modeContinuous / standby operation Luminous flux (lumen)approx. 500 Light sourceLED (integrated) Protection ratingIP65 Dimensions (L x W x H in mm)approx. 300 x 150 x 80 Integrated battery TechnologyLiFePO4 Rated voltage (V)6.4 Capacity (Ah)3.0 Autonomy time (h)3  FAQs about the emergency luminaireWhen is chain mounting required?Chain or wire mounting is always used when the structural ceiling is very high (e.g. in industrial or warehouse halls) and the luminaire needs to be positioned closer to the floor to achieve the illuminance required by standards for escape routes or work areas.What does the protection rating IP65 mean?The IP65 protection rating indicates that the luminaire is "dust-tight" (first digit 6) and protected against "water jets" from any angle (second digit 5). This makes it ideal for use in harsh, damp or dusty environments such as industrial halls, workshops or covered outdoor areas.What is the advantage of a single-battery luminaire with autotest in large halls?In large halls, the wiring for a central battery system is often very complex. Single-battery luminaires only require a local 230V connection. The autotest function is particularly valuable here, as the luminaires are often difficult to access. A visual inspection of the status LED from the floor is sufficient to check operational readiness, which drastically reduces maintenance requirements.Can the luminaire be operated in continuous and standby mode?Yes, modern single-battery luminaires are generally designed for both operating modes and can often be set directly on the luminaire. In standby mode (BS) the emergency lighting only switches on in the event of a power failure. In continuous operation (DS) it illuminates permanently and can contribute to general orientation lighting. 

This elegant LED emergency luminaire from Beltrona has been specially developed for pendant mounting and is ideal for architecturally demanding rooms with high ceilings. As a self-contained single-battery luminaire with a long-life rechargeable battery and automatic test function, it offers maximum installation flexibility and low-maintenance operation. The luminaire combines a minimalist design with modern LED technology and optimised lenses to ensure standard-compliant emergency lighting that blends harmoniously into the surroundings.Highlights at a glanceElegant pendant mounting: Ideal for installation in prestigious areas, foyers, sales rooms and halls with high ceilings.Self-contained single battery system: Integrated, long-life rechargeable battery (e.g. LiFePO4) for an emergency lighting duration of 3 hours.Automatic test function: Performs regular self-tests and displays the status via an LED, which simplifies maintenance.Optimised illumination: Interchangeable lenses for needs-based escape route or anti-panic lighting.Long-lasting LED technology: High efficiency, long service life and minimal maintenance.Reliable illumination in demanding environmentsThis emergency luminaire is the ideal solution for compliant emergency lighting in a variety of properties where both aesthetics and function play a role. The pendant mounting allows the luminaire to be suspended from high ceilings to the correct standardised height in order to achieve optimum light distribution. It is perfect for use in entrance halls, museums, modern office complexes, airports and retail spaces.Advanced and efficient LED technologyThe centrepiece of the luminaire is a state-of-the-art LED module that ensures maximum luminous efficacy with minimum energy consumption. In combination with the specially developed lenses, the powerful LEDs guarantee that sufficient illuminance is achieved on the ground even from great heights. The long service life of the LEDs of up to 50,000 hours minimises maintenance requirements considerably.Designed for easy installation and minimised maintenanceThe luminaire is designed for quick and error-free installation by the installer. It is mounted using a sturdy pendant tube or cable suspension. As this is a single-battery luminaire, only a 230V mains connection to the ceiling is required. The automatic test function (Autotest) automatically checks the function of the light source and battery at regular intervals and signals the status via a multi-coloured LED. This considerably reduces the amount of manual testing required in hard-to-reach installation locations. Features  ModelBeltrona LED emergency luminaire (pendant mounting) General luminaire data ApplicationEscape route & anti-panic lighting Mounting typePendant mounting Operating modePermanent / standby mode Luminous flux (lumen)approx. 250 Light sourceLED (integrated) Protection classIP40 Dimensions (Ø x H in mm)approx. 80 x 150 Integrated rechargeable battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs about the emergency luminaireWhen does pendant mounting make sense?Pendant mounting is always used when the structural ceiling is very high (e.g. in foyers, halls) and the luminaire needs to be positioned closer to the floor in order to achieve the illuminance required by standards. It is also chosen for architectural reasons in order to integrate the luminaire as a deliberate design element.What is the difference between escape route lighting and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor and thus clearly define the course of the escape route. The anti-panic lighting utilises a wide, rotationally symmetrical lens to evenly illuminate large, open areas to facilitate orientation and prevent panic.What is the advantage of a single-battery luminaire with autotest?A single-battery luminaire does not require a connection to a central emergency power system and is therefore very flexible to install and ideal for retrofitting. The autotest function automates the prescribed function tests and reports faults directly at the luminaire, which considerably simplifies regular manual inspections, especially for high-mounted luminaires.Can the luminaire be operated in continuous and standby mode?Yes, modern single-battery luminaires are generally designed for both operating modes and can often be set directly on the luminaire. In the standby mode (BS) the emergency lighting only switches on in the event of a power failure. In the continuous mode (DS) it illuminates permanently and can contribute to general orientation lighting.

This high-quality emergency luminaire from Beltrona was specially developed for discreet installation in suspended ceilings and ensures reliable and standard-compliant emergency lighting in the event of a power failure. As a self-contained single-battery luminaire with a long-life battery and automatic test function, it offers maximum flexibility during installation and low-maintenance operation. The luminaire combines an unobtrusive design with modern LED technology and optimised lenses for illuminating escape routes or anti-panic areas.Highlights at a glanceDiscreet recessed installation: Ideal for seamless and architecturally appealing installation in grid or plasterboard ceilings.Self-contained single-battery system: Integrated, long-life battery (e.g. LiFePO4) for an emergency lighting duration of 3 hours.Automatic test function: Performs regular self-tests and displays the status by means of an LED, which simplifies maintenance.Optimised illumination: Interchangeable lenses for requirement-based escape route or anti-panic lighting.Durable LED technology: High efficiency, long service life and minimal maintenance.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for regulation-compliant emergency lighting in a wide variety of buildings. The recessed ceiling installation is perfect for use in corridors, offices, retail premises, schools and hospitals. It ensures that escape and rescue routes are clearly visible in the event of an emergency and that panic in larger areas is avoided by means of sufficient illumination, without disturbing the overall architectural appearance.Advanced and efficient LED technologyThe heart of the luminaire is a modern LED module that ensures high luminous efficacy with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours, higher switching resistance and immediate, full brightness in an emergency. This considerably reduces operating and maintenance costs over the entire lifetime of the building.Developed for easy installation and minimised maintenanceThe luminaire is designed for quick and error-free installation by a professional in standard ceiling cut-outs. As it is a single-battery luminaire, only a 230V mains connection is required. The automatic test function (autotest) independently checks the function of the luminaire and battery at regular intervals and indicates the status via a multi-coloured LED. This significantly reduces the manual testing effort and lowers operating costs. Features  ModelBeltrona LED emergency luminaire (recessed ceiling) General luminaire data ApplicationEscape route & anti-panic lighting Mounting typeRecessed ceiling Operating modeContinuous / standby mode Luminous flux (lumen)approx. 180 Light sourceLED (integrated) Installation diameter (mm)approx. Ø 75 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs about the emergency luminaireWhat is the difference between escape route and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor, clearly defining the course of the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open spaces (e.g. foyers, conference rooms), making orientation easier and helping to prevent panic.What is the advantage of a single-battery luminaire with autotest?A single-battery luminaire does not require connection to a central emergency power supply and is therefore very flexible to install and ideal for retrofitting. The autotest function automates the prescribed function tests and reports faults directly on the luminaire, which greatly simplifies regular manual inspection.Can the luminaire be operated in continuous and standby mode?Yes, modern single-battery luminaires are generally designed for both operating modes and can often be set directly on the luminaire. In standby mode (BS), the emergency lighting is only activated in the event of a power failure. In continuous mode (DS), it illuminates permanently and can, for example, contribute to general orientation lighting.What advantage do modern batteries such as LiFePO4 offer?Modern lithium iron phosphate batteries (LiFePO4) offer a significantly longer service life of up to 8 years compared to older NiCd batteries, halving the maintenance intervals. They are also more environmentally friendly as they contain no toxic heavy metals.

This high-quality escape sign luminaire from Beltrona has been specially developed for direct wall mounting and connection to central battery systems (CPS). It ensures a clear and compliant indication of escape and rescue routes. With a standard-compliant detection range of 27 metres, durable LED technology and a comprehensive pictogram set included, this luminaire offers maximum flexibility and safety for professional installations in centrally supplied buildings.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Clear visibility: Ensures a standard-compliant detection range of 27 metres in accordance with EN 1838.Optimised for wall mounting: Ideal for installation above doors, at corridor ends and in stairwells.Flexible pictogram set: A set with 4 directional pictograms and a blank film are included.Durable LED technology: High efficiency, long service life and minimal maintenance effort.Clear labelling of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide range of properties equipped with a central emergency power system. Direct wall mounting is the conventional installation method for marking exits or at the end of escape routes where clear directional guidance is required. It is perfectly suited for use in office buildings, retail stores, schools, hospitals and industrial halls.Advanced and efficient LED technologyThe core of the luminaire is a modern LED module that ensures bright and absolutely uniform illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours and immediate, full brightness in an emergency. This significantly reduces operating costs and maintenance effort over the entire service life of the building.Designed for easy installation and centralised maintenanceThe luminaire is designed for rapid and fault-free installation by a professional installer. Connection to the central battery system is via an easily accessible terminal. In a central system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and reported by the central control unit, which significantly simplifies maintenance compared to single battery luminaires and increases operational safety. Features  ModelBeltrona LED escape sign luminaire (central battery) ApplicationEscape route marking Mounting typeWall surface mounting Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 2.5 Detection range (m)approx. 20 Light sourceLED strip (integrated) Pictogram setIncluded (arrow left/right/down) Dimensions (W x H x D in mm)approx. 260 x 180 x 45  FAQs on the escape sign luminaireWhat does "ZB" or "central battery" mean?"ZB" stands for central battery. This means this luminaire does not have its own battery, but is supplied from a central emergency power supply system (also known as CPS) in the building. This simplifies maintenance as the batteries are grouped at a single location.What does "detection range 27m" mean?The detection range is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is specified in standard EN 1838. A detection range of 27 metres is a common standard value for many applications.What is the blank film used for?The blank film (or dummy film) serves as a placeholder or can be used to cover one side of a luminaire if required. In some cases, it is also used as an indicator luminaire without a specific direction to generally mark an emergency exit.Can the luminaire be operated in permanent and standby mode?Yes. The switching type (permanent operation/DS or standby operation/BS) for the escape sign luminaire is set centrally in the emergency power system for the relevant circuit and can be reprogrammed if necessary. According to most building regulations, escape sign luminaires must be operated in permanent operation.

This high-quality escape sign luminaire from Beltrona has been specially developed for wall bracket mounting and connection to central battery systems (CPS). It ensures clear and double-sided marking of escape and rescue routes. The luminaire combines an elegant, functional design with durable LED technology and a comprehensive pictogram set to ensure maximum flexibility and safety in professional, centrally powered building projects.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Wall bracket mounting: Ideal for installation visible from both sides in long corridors, passages and large rooms.Clear visibility: Ensures a standard-compliant recognition distance of 27 metres according to EN 1838.Flexible pictogram set: A set of standard pictograms is included in the scope of delivery.Durable LED technology: High efficiency, long service life and minimal maintenance effort.Clear marking of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide variety of buildings. The wall bracket mounting, where the luminaire is perpendicular to the wall, ensures excellent visibility from both directions in corridors and passageways. It is perfectly suited for use in office buildings, retail outlets, schools, hospitals and industrial halls equipped with a central emergency power system.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures bright and absolutely uniform illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer lifetime of up to 50,000 hours and instant full brightness in an emergency. This significantly reduces operating costs and maintenance effort over the entire service life of the building.Developed for easy installation and central maintenanceThe luminaire is designed for quick and error-free installation by a professional. Connection to the central battery system is via an easily accessible terminal. In a centralised system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and reported by the central control unit, which makes maintenance much easier compared to single-battery luminaires and increases operational reliability. Features  ModelBeltrona LED escape sign luminaire (wall bracket, central battery) ApplicationEscape route marking Mounting typeWall bracket mounting Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.5 Recognition distance (m)approx. 25 Light sourceLED strip (integrated) Pictogram setIncluded (arrow left/right/down) Housing materialAluminium / acrylic glass  FAQs on the escape sign luminaireWhat does "wall bracket mounting" mean?With this type of installation, the luminaire is attached vertically to the wall with a bracket (a holder). As a result, the pictogram panel projects into the room and is clearly visible from both sides, which is ideal for long corridors.What is the advantage of a central battery system ("ZB")?Central battery systems (CPS) simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in a central location, and the regular function tests can be automated and centrally logged. In large buildings, this is much more efficient than maintaining hundreds of individual batteries in the luminaires themselves.What does "recognition distance 27m" mean?The recognition distance is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is specified in the EN 1838 standard. A recognition distance of 27 metres is a common standard value for many areas of application.Can the luminaire be operated in continuous and standby mode?Yes. The switching mode (permanent operation/DS or standby operation/BS) for the escape sign luminaire is defined centrally in the emergency power system for the respective circuit and can be reprogrammed if necessary. According to most building regulations, escape sign luminaires must be operated in permanent operation.

This high-quality emergency luminaire from Beltrona has been specially developed for surface-mount ceiling installation and connection to central battery systems (CPS). It ensures reliable and standard-compliant emergency lighting in case of power failure. The luminaire combines a functional, robust design with modern LED technology, centralised monitoring, and optimised lenses for illuminating escape routes or anti-panic areas.Highlights at a glanceCentral battery compatible: Designed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Simple surface mounting: Ideal for direct installation on solid ceilings or in areas without suspended ceiling construction.Centralised monitoring: Enables easy and efficient monitoring of luminaire function via the central battery system.Durable LED technology: High efficiency, long service life, and minimal maintenance.Optimised illumination: Interchangeable lenses for demand-oriented escape route or anti-panic lighting.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for regulation-compliant emergency lighting in a wide variety of properties. Surface-mounted ceiling installation is perfect for use in corridors, stairwells, offices, shops, schools, and hospitals equipped with a central emergency power system. It ensures that in an emergency, escape and rescue routes are clearly visible and panic in larger areas is avoided by sufficient illuminance.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures high luminous efficiency with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a noticeably longer life of up to 50,000 hours and immediate, full brightness in an emergency. This greatly reduces operating costs and maintenance over the lifetime of the building.Designed for easy installation and centralised maintenanceThe luminaire is designed for fast and error-free installation by a specialist installer. Connection to the central battery system is via an easily accessible terminal. In a central system, each individual luminaire is permanently monitored via the supply line. Failure of the light source is immediately detected and reported by the central control unit, which significantly simplifies maintenance compared to individual battery luminaires and increases operational reliability. Characteristics  ModelBeltrona LED emergency luminaire (surface ceiling mount, central battery) ApplicationEscape route & anti-panic lighting Mounting typeSurface-mounted ceiling installation Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Luminous flux (lumen)approx. 200 Light sourceLED (integrated) Degree of protectionIP40 Dimensions (Ø x H in mm)approx. 120 x 45  FAQs about the emergency luminaireWhat is the difference between escape route lighting and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor, thereby clearly defining the course of the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas (e.g. foyers, conference rooms), thereby making orientation easier and preventing panic.What is the advantage of a central battery system (“ZB”)?Central battery systems (CPS) simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in a central place, and regular functional tests can be automated and centrally logged. In large buildings, this is much more efficient than servicing hundreds of individual batteries in each luminaire separately.Can the luminaire be operated in both continuous and standby switching?Yes. The switching mode (continuous switching/DS or standby switching/BS) for the emergency luminaire is set centrally in the emergency power system for the relevant circuit and can be reprogrammed as required.How is the luminaire monitored?Monitoring is centralised. If a light source fails or another fault occurs in the luminaire circuit, this is immediately detected by the central control unit, specifically assigned and reported as a malfunction. This allows rapid and targeted troubleshooting.

This robust LED emergency light from Beltrona has been specially developed for chain or wire suspension in high spaces such as industrial and warehouse halls and for connection to central battery systems (CPS). The luminaire combines a resilient housing with a high protection rating, modern LED technology, central monitoring and optimised lenses to ensure standard-compliant safety lighting even from great heights.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Flexible chain mounting: Ideal for installation in industrial halls, warehouses, supermarkets and other buildings with high ceilings.Central monitoring: Enables simple and efficient monitoring of the luminaire’s function via the central battery system.High protection rating: Robust housing (e.g. IP65) to protect against dust and water jets, suitable for demanding environments.Optimised for great heights: Powerful LEDs and special lenses for effective escape route or anti-panic lighting.Reliable illumination in demanding environmentsThis emergency luminaire is the ideal solution for compliant safety lighting in spacious and high parts of buildings. Chain mounting allows the luminaire to be suspended from high ceilings or supporting structures to the correct height according to standards. It is perfect for use in manufacturing facilities, logistics centres, DIY superstores and sports halls equipped with a central emergency power system, which enables easy maintenance and monitoring of the entire installation.Advanced and efficient LED technologyAt the heart of the luminaire is a cutting-edge LED module that ensures maximum luminous efficiency with minimal energy consumption. In combination with the specially developed lenses, the powerful LEDs guarantee that, even when mounted at heights of over 10 metres, sufficient illuminance is achieved at floor level. The long lifetime of the LEDs of up to 50,000 hours significantly minimises the need for maintenance.Developed for easy installation and central maintenanceThe luminaire is designed for quick and error-free installation by the professional tradesperson. Mounting is via robust eyelets for chain suspension, and electrical connection to the central battery system is via an easily accessible terminal. In a central system, each luminaire is permanently monitored over the supply line. A failure of the light source is immediately detected and reported by the central control unit, making maintenance particularly easy for high-mounted areas. Features  ModelBeltrona LED emergency luminaire (chain mounting, central battery) ApplicationHall & escape route lighting Mounting typeChain suspension Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 5.0 Luminous flux (Lumen)approx. 500 Light sourceLED (integrated) Protection ratingIP65 Dimensions (L x W x H in mm)approx. 300 x 150 x 80  FAQs about the emergency luminaireWhen is chain mounting required?Chain or cable mounting is used whenever the structural ceiling is very high (e.g. in industrial or warehouse halls) and the luminaire needs to be positioned closer to the floor in order to achieve the lighting level required by standards for escape routes or work areas.What does protection rating IP65 mean?The IP65 protection rating indicates that the luminaire is “dust-tight” (first digit 6) and protected against “water jets” from any angle (second digit 5). This makes it ideal for use in tough, damp or dusty environments such as industrial halls, workshops or covered outdoor areas.What is the advantage of a central battery system (“ZB”) in large halls?In large and high halls, maintaining single-battery luminaires is very elaborate because each luminaire must be reached individually. With a central battery system, all batteries are located in a single, easily accessible place. Monitoring the hard-to-reach luminaires is automatic and central, drastically reducing maintenance effort and operating costs.Can the luminaire be operated in permanent and standby mode?Yes. The switching type (permanent switching/DS or standby switching/BS) for the emergency luminaire is defined centrally in the emergency power system for the respective circuit and can be reprogrammed if required.

This elegant LED emergency luminaire from Beltrona has been specially developed for pendant mounting and connection to central battery systems (CPS) and is ideal for architecturally sophisticated rooms with high ceilings. The luminaire combines a minimalist design with modern LED technology, central monitoring and optimised lenses to ensure standard-compliant yet aesthetic emergency lighting.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Elegant pendant mounting: Ideal for installation in prestigious areas, foyers, sales rooms and halls with high ceilings.Centralised monitoring: Enables simple and efficient monitoring of the luminaire function via the central battery system.Long-life LED technology: High efficiency, long service life and minimal maintenance.Optimised illumination: Interchangeable lenses for escape route or anti-panic lighting as required.Reliable illumination in demanding environmentsThis emergency luminaire is the ideal solution for compliant emergency lighting in a wide range of properties where both aesthetics and function play a role. The pendant mounting makes it possible to suspend the luminaire from high ceilings to the correct standardised height in order to achieve optimum light distribution. It is perfect for use in entrance halls, museums, modern office complexes, airports and retail spaces that have a centralised emergency power system.Advanced and efficient LED technologyThe centrepiece of the luminaire is a state-of-the-art LED module that ensures maximum luminous efficacy with minimum energy consumption. In combination with the specially developed lenses, the powerful LEDs guarantee that sufficient illuminance is achieved on the ground even from great heights. The long service life of the LEDs of up to 50,000 hours minimises maintenance requirements considerably.Developed for easy installation and centralised maintenanceThe luminaire is designed for quick and error-free installation by the installer. It is mounted using a sturdy pendant tube or wire suspension, and the electrical connection to the central battery system is made via an easily accessible terminal. In a centralised system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and signalled by the central control unit, which simplifies maintenance, especially in high-mounted areas. Features  ModelBeltrona LED emergency luminaire (pendant mounting, central battery) ApplicationEscape route & anti-panic lighting Mounting typePendant mounting Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Luminous flux (lumen)approx. 250 Light sourceLED (integrated) Protection classIP40 Dimensions (Ø x H in mm)approx. 80 x 150  FAQs about the emergency luminaireWhen does pendant mounting make sense?Pendant mounting is always used when the structural ceiling is very high (e.g. in foyers, halls) and the luminaire needs to be positioned closer to the floor in order to achieve the illuminance required by standards. It is also chosen for architectural reasons in order to integrate the luminaire as a conscious design element.What is the advantage of a central battery system ("ZB") in high rooms?In high and often difficult to access areas, a central battery system simplifies maintenance enormously. Instead of having to reach each individual luminaire using a lifting platform to check or replace the battery, the entire battery system is located in a central, easily accessible location. The luminaires themselves are then virtually maintenance-free.What is the difference between escape route lighting and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor and thus clearly define the course of the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas, making orientation easier and helping to prevent panic.Can the luminaire be operated in permanent and standby mode?Yes. The switching mode (permanent switching/DS or standby switching/BS) for the emergency luminaire is set centrally in the emergency power system for the respective circuit and can be reprogrammed if required.

This high-quality emergency luminaire from Beltrona has been specially developed for discreet installation in suspended ceilings and connection to central battery systems (CPS). It ensures reliable and standard-compliant emergency lighting in the event of a power failure. The luminaire combines an unobtrusive design with modern LED technology, central monitoring, and optimised lenses for the illumination of escape routes or anti-panic areas.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Discreet recessed mounting: Ideal for seamless and architecturally appealing installation in grid or plasterboard ceilings.Central monitoring: Enables simple and efficient monitoring of the luminaire function via the central battery system.Durable LED technology: High efficiency, long service life and minimal maintenance requirements.Optimised illumination: Interchangeable lenses for needs-based escape route or anti-panic lighting.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for compliant emergency lighting in a wide range of buildings. The recessed ceiling mounting is perfect for use in corridors, offices, retail outlets, schools and hospitals. It ensures that in an emergency escape and rescue routes are clearly recognisable and that panic in larger areas is avoided thanks to sufficient illuminance, without disturbing the overall architectural appearance.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures a high luminous flux with minimum power consumption. Compared to older fluorescent lamps, the LED technology offers a much longer service life of up to 50,000 hours and immediate, full brightness in the event of an emergency. This significantly reduces operating costs and maintenance requirements over the entire service life of the building.Developed for easy installation and central maintenanceThe luminaire is designed for fast and fault-free installation by the specialist in standard ceiling cut-outs. The connection to the central battery system is made via an easily accessible terminal. In a central system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and reported by the central control unit, which significantly simplifies maintenance compared to single-battery luminaires and increases operational safety. Features  ModelBeltrona LED emergency luminaire (recessed ceiling, central battery) ApplicationEscape route & anti-panic lighting Mounting typeRecessed ceiling Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 1.5 Luminous flux (lumens)approx. 180 Light sourceLED (integrated) Protection ratingIP20 Installation diameter (mm)approx. Ø 75  FAQs about the emergency luminaireWhat is the difference between escape route and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor and thus clearly defines the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas (e.g., foyers, conference rooms), making orientation easier and avoiding panic.What is the advantage of a central battery system ("ZB")?Central battery systems (CPS) simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in one central location, and regular function tests can be automated and centrally logged. This is significantly more efficient in large buildings than maintaining hundreds of individual batteries in the luminaires themselves.Can the luminaire be operated in permanent and standby mode?Yes. The type of switching (permanent switching/DS or standby switching/BS) for the emergency luminaire is defined centrally in the emergency power system for the respective circuit and can be reprogrammed if necessary.How is the luminaire monitored?Monitoring is central. If a light source fails or there is another fault in the luminaire circuit, this is immediately detected, specifically assigned and reported as a fault by the central control unit. This enables fast and targeted troubleshooting.

This ceiling-mounted emergency light is a high-quality and robust safety luminaire, specially designed for connection to central battery systems (CPS). With its modern design and flexible suspension, it is ideal for the compliant illumination of escape routes and for anti-panic lighting in high rooms. The luminaire combines long-lasting LED technology with easy installation, thus ensuring maximum safety and reliability in emergencies.Highlights at a glanceCentral battery compatible: Designed for direct connection to 230V AC/DC central and group battery systems.Flexible installation: Suitable for direct ceiling mounting or suspended installation in rooms with high ceilings.Optimised illumination: Interchangeable lenses for need-based escape route or anti-panic lighting.Long-lasting LED technology: High efficiency, long lifespan (e.g. 50,000 hours) and minimal maintenance.High quality: Robust housing and compliance with all relevant European standards for emergency lighting.Reliable emergency lighting for professional propertiesThis emergency luminaire is the ideal solution for a variety of professional building projects where a central emergency power supply is in use. It is perfectly suited for use in office buildings, retail outlets, schools, hospitals, industrial halls and underground garages. The possibility of suspended installation makes it especially valuable for areas with high ceilings, such as entrance halls, storage rooms or production facilities where near-floor illumination must be ensured.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures high luminous efficacy with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a significantly longer service life, higher switching stability and instant, full brightness in an emergency. This considerably reduces operating costs and maintenance requirements over the entire building's lifecycle.Developed for easy installation and maintenanceThe luminaire is designed for fast and error-free installation by the professional. Connection to the central battery unit is via an easily accessible terminal. The luminaire is permanently monitored and, in the event of a fault, reported by the central system. Replaceable lens optics allow flexible adaptation to the room situation on site to achieve compliant illumination in accordance with EN 1838. Features  ModelCeiling-mounted emergency luminaire with suspension ApplicationEscape route lighting Mounting typeCeiling surface-mount / ceiling suspension Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Light sourceLED (integrated) Luminous flux (Lumen)approx. 250 Protection ratingIP40 Dimensions (L x W x H in mm)approx. 300 x 60 x 45 Suspension length (mm)approx. 1000  FAQs on the emergency luminaire for central battery systemsWhat is the advantage of a central battery system compared to a luminaire with a single battery?Central battery systems (CPS) significantly simplify the maintenance and monitoring of the whole emergency lighting system. All batteries are located in one central, easily accessible place. Regular function tests can be automated and logged centrally. This is especially more efficient and often more economical in large buildings than maintaining hundreds of individual batteries in each luminaire.What are different lenses needed for?Different areas within a building require different lighting patterns. An escape route lens produces a long, narrow light corridor to optimally illuminate escape routes. An anti-panic lens produces a wide, square light distribution to evenly illuminate large, open spaces like foyers or halls and to prevent panic.What does "suspension" mean?"Suspension" means that the luminaire is not mounted directly to the ceiling, but is suspended from the ceiling using rods or cables. This is necessary when the structural ceiling is very high (e.g. industrial halls), but the required illumination level at floor level must still be achieved as per standards.How is the luminaire monitored?In a central battery system, each individual luminaire is permanently monitored via the supply line. If a light source fails or there is another fault, this is immediately detected by the central control unit and reported as a malfunction. This ensures high operational reliability of the entire system.

This recessed ceiling emergency light is a modern and technologically advanced safety light, designed for a discreet and seamless integration into suspended ceilings. It combines long-life LED technology with a highly safe lithium iron phosphate (LiFePO4) battery with 3.2V and 1.5Ah, ensuring maximum safety and reliability in an emergency. Thanks to the integrated single-battery system with auto-test function, it is the ideal, low-maintenance solution for professional construction projects.Highlights at a glanceSingle battery system: Integrated 3.2V LiFePO4 battery for self-sufficient operation of up to 3 hours.Long-life LiFePO4 technology: Offers maximum cycle stability, long service life (up to 8 years) and maximum operational safety.Discreet recessed mounting: For unobtrusive and architecturally appealing installation in grid or plasterboard ceilings.Automatic test function: Carries out regular self-tests and indicates the status via an LED, which simplifies maintenance.Optimised illumination: Interchangeable lenses for demand-oriented escape route or anti-panic lighting.Reliable emergency lighting for professional propertiesThis emergency light is the ideal solution for a wide range of professional construction projects that prefer decentralised emergency power supply. It is perfect for installation in office buildings, sales outlets, schools, hospitals and corridors. The unobtrusive integration into the ceiling construction makes it the first choice for architects and planners who value a clear and calm ceiling design without compromising on safety.Superior and safe LiFePO4 battery technologyAt the heart of the self-sufficient supply is the integrated lithium iron phosphate (LiFePO4) battery. This modern battery technology is considered the safest and most durable in the lithium-ion range. It offers an extremely high number of charge and discharge cycles, is thermally stable and intrinsically safe, which minimises the risk of fire. Compared to conventional NiCd batteries, it offers a significantly longer service life, higher efficiency and better environmental compatibility.Designed for easy installation and minimised maintenanceThe light is designed for quick and error-free installation by the professional tradesperson in ceiling cut-outs. The automatic test function (autotest) automatically checks the function of the light source and battery at regular intervals and signals the status via a multicoloured LED. This greatly reduces the manual testing effort and lowers operating costs over the entire lifetime of the building. Features  ModelRecessed ceiling emergency light (single battery) General luminaire data ApplicationEscape route lighting Mounting typeCeiling recessed Operating modeContinuous / standby mode Light sourceHigh-power LED (integrated) Luminous flux (lumen)approx. 150 Installation diameter (mm)approx. Ø 70 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs on the single-battery emergency light with LiFePO4 batteryWhat is the advantage of a LiFePO4 battery in an emergency light?Lithium iron phosphate (LFP/LiFePO4) is the safest lithium-ion technology. It is extremely cycle-resistant, which allows a very long service life of up to 8 years and halves the replacement intervals compared to old NiCd batteries (approx. 4 years). It is also more environmentally friendly as it contains no heavy metals such as cadmium.What does "Autotest" function mean?The light automatically performs the legally required function tests (e.g. weekly short test, annual endurance test). The result is displayed directly on the luminaire via a status LED. This saves the operator the time-consuming manual testing of each individual light and ensures complete documentation of operational readiness.Can the light be operated in continuous and standby mode?Yes, modern single-battery lights like these are generally suitable for both modes of operation. In the standby mode (BS) the light only switches on in the event of a power failure. In the continuous mode (DS) it remains permanently lit and serves, for example, as part of the general lighting in normal operation.What are different lenses needed for?Different areas in a building require different lighting patterns. An escape route lens creates a long, narrow light corridor to optimally illuminate escape routes. An anti-panic lens creates a wide, square light distribution to evenly illuminate large, open areas such as foyers or halls and prevent panic. 

This multifunctional emergency luminaire is a modern and high-quality safety light that has been designed for discreet integration into suspended ceilings and also offers the possibility of suspension. Connected to central battery systems (CPS), it combines durable LED technology with a robust design to ensure maximum safety. Thanks to its dual mounting option, it is the ideal, flexible solution for professional construction projects with different ceiling heights and architectural requirements.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems.Flexible mounting: Suitable for discreet ceiling installation as well as for suspended installation in high rooms.Centralised monitoring: Enables simple and efficient monitoring of the luminaire function via the central battery system.Long-life LED technology: High efficiency, long service life (e.g. 50,000 hours) and minimal maintenance.Optimised illumination: Interchangeable lenses for demand-based escape route or anti-panic lighting.Reliable safety lighting for professional propertiesThis emergency luminaire is the ideal solution for a wide range of professional construction projects. As a recessed luminaire, it integrates seamlessly into the ceilings of offices, corridors, retail outlets and hospitals. Its additional ability for suspended mounting also makes it the perfect choice for areas with high ceilings such as entrance halls, foyers, warehouses or production areas where regulation-compliant illuminance at floor level must be ensured.Advanced and efficient LED technologyThe heart of the luminaire is a modern LED module that ensures high luminous efficacy with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a significantly longer service life, greater switching stability and immediate, full brightness in the event of an emergency. This significantly reduces operating costs and maintenance requirements throughout the entire service life of the building.Designed for easy installation and centralised maintenanceThe luminaire is designed for quick and fault-free installation by the installation professional. In a central battery system, each individual luminaire is permanently monitored via the supply line. If a light source fails or another fault occurs, this is immediately detected by the central control unit and reported as a fault. This ensures a high level of operational reliability for the entire system. Features  ModelRecessed ceiling emergency luminaire for central battery ApplicationEscape route & anti-panic lighting Mounting typeRecessed ceiling installation (optional suspension) Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Light sourceLED (integrated) Luminous flux (lumen)approx. 300 Degree of protectionIP42 Installation diameter (mm)approx. Ø 85  FAQs on the luminaire for central battery systemsWhat is the advantage of a central battery system compared to a luminaire with a single battery?Central battery systems (CPS) significantly simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in one central, easily accessible location. Regular function tests can be automated and logged centrally. This is especially more efficient and often more economical in large buildings than maintaining hundreds of individual batteries in the luminaires themselves.When do I use recessed mounting and when do I use suspended mounting?The recessed mounting is ideal for standard ceiling heights in offices, corridors or shops to create discreet lighting integrated into the architecture. The suspension is used in rooms with very high ceilings (e.g. halls, foyers) to lower the luminaire to the standard-compliant height and thus achieve the required illuminance at floor level.What are different lenses needed for?Different areas in a building require different lighting patterns. An escape route lens creates a long, narrow light corridor to optimally illuminate escape routes. An anti-panic lens creates a wide, square light distribution to evenly illuminate large, open areas and avoid panic.How is the luminaire monitored?Monitoring is centralised. If a light source fails or another fault occurs in the luminaire circuit, this is immediately detected by the central control unit, specifically assigned and reported as a fault. This enables quick and targeted troubleshooting.