Vision
Vision EV Series lead-acid battery EV34-65-AX with 12V and 65Ah
The Vision EV34-65-AX is a high-performance, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 65 Ah capacity, specially designed for demanding traction applications. Equipped with robust, cycle-resistant AGM technology, this battery offers a reliable and long-lasting power supply for electric vehicles and industrial applications. Whether in daily use in golf carts, cleaning machines or lifting platforms, the EV34-65-AX meets the highest requirements for cycle resistance and longevity.Highlights at a glanceExtreme cycle resilience: Developed for demanding deep cycle use with a very high number of charge and discharge cycles.High capacity: 65 Ah at 12 V for long operation times and high electric vehicle range.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Robust construction: Reinforced grid plates and high vibration resistance ensure long service life even under demanding conditions.Flexible installation: Operation is possible in all positions, except for continuous upside down use.Low self-discharge: Enables longer storage without significant loss of capacity.Strong performance for traction applicationsThe Vision EV34-65-AX delivers a nominal capacity of 65 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it outstanding resistance to the stresses of daily deep discharging and recharging. This makes it the perfect choice for golf carts, automated guided vehicle systems (AGVs), cleaning machines and other electric vehicles, where maximum cycle life and reliability are key.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) in conjunction with the AGM system, in which the electrolyte is securely bound in a glass fibre mat, the EV34-65-AX is completely sealed, leak-proof and resistant to vibrations. Specially developed, thick grid plates minimise corrosion and maximise service life in cyclical use. The robust ABS plastic housing reliably protects the internal components from mechanical stresses in everyday mobile use and ensures a long and safe period of use.Features ModelVision EV34-65-AX Battery typeVRLA AGM (Deep Cycle / Traction) Nominal voltage (V)12 Capacity (Ah)65 (at 20h rate) Maximum discharge current650A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 500 cycles at 80% depth of discharge Dimensions (L/W/H, mm)349 x 167 x 181 Weight (kg)approx. 22.0 ConnectionM8 internal thread CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision EV34-65-AX lead-acid batteryFor which applications is the EV34-65-AX suitable?The battery is ideal for a variety of demanding traction and deep cycle applications:Golf carts and similar electric vehiclesIndustrial cleaning machinesScissor-type and articulated liftsAutomated guided vehicle systems (AGV)Marine and camping applications with high cycle requirements Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with distilled water, and it is protected against leakage in any position.What is the difference to a standard lead-acid battery?The EV34-65-AX is a pure deep cycle battery. It uses reinforced lead plates and special additives that make it extremely resilient against the stresses of deep discharges. A standard AGM battery is usually optimised for standby operation (e.g. in UPS systems) and would lose capacity very quickly with daily cyclic use.How should several batteries be connected in a vehicle?In electric vehicles such as golf carts, several batteries are connected in series to increase the system voltage (e.g. three batteries for 36V or four for 48V). It is crucial that you always replace a complete set of identical batteries (same model, same age, same manufacturer) simultaneously to ensure balanced performance and maximum service life.What charging parameters apply for this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Maximum charging current: The recommended maximum charging current is 19.5 A. Using a high-quality, multi-stage charger with AGM profile is crucial for long service life.How should the battery be stored in winter?If the vehicle is not used for a longer period of time, the batteries should be fully charged and stored in a cool, dry place. It is recommended to recharge the batteries every two to three months to prevent deep discharge through self-discharge and to maintain full performance.
VISION lead-acid battery 6FM230DX with 12V and 230Ah
The Vision 6FM230DX is a cycle-proof, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 230 ampere-hours capacity. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems requiring high cycle stability and deep discharge, and is excellent for both cyclic and standby operation.Highlights at a glanceCycle-proof: Designed for a high number of charge and discharge cycles, significantly extending service life compared to conventional VRLA batteries.High capacity: 230 Ah at 12 V for long-lasting and stable power supply.Maintenance-free: Thanks to leak-proof AGM technology.Low self-discharge: Only about 3% capacity loss per month at 20°C, enabling long-term storage.Flexible installation: Operation is possible in various positions, except permanent overhead installation.Durable: Service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM230DX reliably supplies power in recurring discharge cycles. With a capacity of 230 Ah at a 20-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy demand. Its special construction, utilising lead-calcium-tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM230DX is absolutely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre fleece, enabling safe handling and operation in any position. The battery has self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of about 3% per month enables long-term storage with high operational readiness.Features ModelVision 6FM230DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)230 (at 20h rate) Max. discharge current1000 A (for 5s) Charging voltage (float charge)13.6 V to 13.8 V Charging voltage (cycle operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)522 x 238 x 218 Weight (kg)65 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM230DX lead-acid batteryFor which applications is the 6FM230DX best suited?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-proof" mean?A cycle-proof battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more designed for standby operation. At 25% depth of discharge, the battery can achieve up to 1400 cycles, at 50% depth of discharge it is still around 600 cycles.How do I charge the battery correctly?We recommend using a charger suitable for AGM batteries with a capacity of 230 Ah. Follow the charging voltages recommended by the manufacturer: for buffer charging (float operation) 13.6 V to 13.8 V and for cycle charging (boost operation) 14.4 V to 14.7 V. A charging current over 60 A can shorten the battery’s service life.How long does the 6FM230DX battery last?The expected service life of the battery is up to 10 years at 20°C in design life. However, the actual lifespan depends heavily on individual operating conditions, depth of discharge and ambient temperature.
Vision Lead-acid battery CP1223 with 12V and 2.3Ah
The Vision CP1223 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery delivers a safe and consistent power supply for a wide range of applications, particularly in security and medical technology.Highlights at a glanceCompact power: 2.3 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104099 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1223 provides a rated capacity of 2.3 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM System (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1223 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features ModelVision CP1223 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4,8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1223 lead-acid batteryWhat applications is the CP1223 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1223?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A to maximise the battery's service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connector. These are flat-pin connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick, tool-free installation.
Vision Lead-acid battery CP1270 with 12V and 7Ah
The Vision CP1270 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1270 provides a rated capacity of 7 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1270 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features ModelVision CP1270 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1270 lead-acid batteryWhat applications is the CP1270 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lights. Please compare the voltage (12V), capacity (7Ah), dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the battery’s service life.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, which enables quick and tool-free installation.
Vision lead-acid battery CP12120F2 with 12V and 12Ah
The Vision CP12120F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP series has been developed for high reliability in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and long-lasting power supply for a wide range of applications, from security systems to emergency power supplies.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting power supply.VdS approved: G 104011 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode at 20 °C.Maintenance-free: Leak-proof and sealed AGM technology with a gas recombination rate of over 99%.High current-carrying capacity: Suitable for loads requiring high inrush currents for short periods.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured in accordance with ISO 9001 and ISO 14001 standards to ensure consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 delivers a capacity of 12 Ah during a 20-hour discharge. It is designed as a general-purpose battery and performs well both in standby parallel operation (float) and during occasional cyclic discharges. With a maximum discharge current of 180 A for 5 seconds, this battery is also ideally suited for short-term power peaks, such as those occurring in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is bound within a glass fibre mat, the CP12120F2 is completely maintenance-free and leak-proof. This ensures safe operation in sensitive environments. The low self-discharge rate of approximately 3% per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against mechanical impact.Features ModelVision CP12120F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6,35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP12120F2 lead-acid batteryWhat applications is the CP12120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12120F2?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.What is the difference between this battery and a purely cycle-resistant type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A battery designed purely for cycling is specifically engineered for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cycle-resistant type would achieve a longer service life.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What temperature ranges and storage conditions apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CSelf-discharge: approximately 3 % per month at 20 °C. For longer storage, it is recommended that the battery be recharged every 6 months.
Vision Lead-acid battery CP12170X with 12V and 17Ah
The Vision CP12170X is a highly reliable, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 17 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12170X meets the highest standards of quality and operational reliability.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.VdS approved: G 104064 for safety-related applicationsHigh capacity: 17 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: A leak-proof design and a robust housing ensure safe operation.Low self-discharge: Ensures a long shelf life and guarantees high operational readiness.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Reliable performance for safety-critical applicationsThe Vision CP12170X delivers a capacity of 17 Ah during a 20-hour discharge. Its design is optimized for standby parallel operation, in which it is constantly maintained at charging voltage so that it can immediately provide full power in the event of a power failure. With its low internal resistance, the battery is capable of delivering high currents even for short periods, making it an ideal choice for demanding UPS systems and other safety-critical systems.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP12170X is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20 °C allows for long-term storage. The robust casing made of impact-resistant ABS plastic is also available in a flame-retardant version compliant with UL94:V0 on request.Features ModelVision CP12170X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)17 (at a 20-hour rate) Maximum discharge current255A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP12170X lead-acid batteryWhat applications is the CP12170X suitable for?The battery is ideal for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devices What does the long service life of up to 10 years mean?The specification "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20 °C. The actual service life achieved depends heavily on operating conditions such as ambient temperature, charging voltage and the frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12170X uses higher-quality materials and a more robust grid construction than standard batteries. This results in less corrosion and wear during continuous charging, which enables a significantly longer service life in standby mode and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby mode, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No topping up with water is necessary and it can be operated safely in appliances and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in any position, with the exception of a permanently inverted position. This allows for flexible integration into a wide variety of devices and systems.
Vision Lead-acid battery CP12240HX with 12V and 24Ah
The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.
Vision lead-acid battery 6FM40X with 12V and 40Ah
The Vision 6FM40X is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 40 ampere-hours. It is specially designed for demanding applications involving repeated charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery delivers a reliable, leak-proof, and long-lasting power supply. It is the ideal solution for systems requiring high cycle stability, deep discharges, and an extended service life, and excels in both cyclic and standby applications.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.VdS approved: G 107076 for safety-related applicationsHigh capacity: 40 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to leak-proof AGM technology with over 99% gas recombination.Low self-discharge: Only approx. 3% capacity loss per month at 20 °C, which allows for long-term storage.Flexible installation: Operation is possible in various positions, with the exception of permanent overhead mounting.Long-lasting: A service life of up to 10 years in the design life.High performance for cyclic applicationsThe 6FM40X delivers reliable power in repeated discharge cycles. With a capacity of 40 Ah at a 10-hour discharge rate, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which utilises lead-calcium-tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM System the 6FM40X is completely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The housing is made of robust ABS plastic that is impact- and break-resistant and is also available on request in a flame-retardant version (UL94:V0). The low self-discharge rate of approximately 3% per month enables long-term storage while maintaining high operational readiness.Features ModelVision 6FM40X Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)40 (at a 10-hour rate) Max. discharge current400 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)13.5 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL FAQs on the Vision 6FM40X lead-acid batteryFor which applications is the 6FM40X best suited?This battery has been specially developed for cyclic applications in which the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs and golf buggies, as well as for use in solar installations, telecommunications systems and mobile measuring devices. Furthermore, the battery has VdS approval, making it ideal for safety-critical applications such as fire and burglar alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specifically designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 40 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging and 14.4 V to 14.7 V for boost charging. An excessively high charging current can shorten the battery’s service life.How long does the 6FM40X battery last?The battery has a design life of up to 10 years at 20 °C. However, the actual service life depends heavily on the specific operating conditions, the depth of discharge and the ambient temperature.
Vision lead-acid battery 6FM65X with 12V and 65Ah
The Vision 6FM65X is a robust, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 65 ampere-hours. It is specially designed for demanding standby and cyclic applications and offers an outstanding service life of up to 10 years in design life. Thanks to the AGM technology (Absorbent Glass Mat), this battery is completely maintenance-free, leak-proof and ensures a reliable and long-lasting power supply for critical systems.Highlights at a glanceLong service life: A service life of up to 10 years in design life for long-lasting reliability.VdS approved: G 107005 for safety-related applicationsHigh capacity: 65 Ah at 12 V for a long-lasting and stable power supply.Maintenance-free: Thanks to leak-proof AGM technology with over 99 % gas recombination.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C, which allows for long-term storage.Flexible installation: Operation is possible in various positions, with the exception of permanent overhead mounting.High current-carrying capacity: Ideally suited for short-term, high-power peaks.Powerful performance for versatile applicationsThe 6FM65X reliably supplies power for a variety of applications. With a capacity of 65 Ah at a 10-hour discharge rate, this battery is an excellent choice for emergency power systems, telecommunications systems and uninterruptible power supplies (UPS). Its robust construction using lead-calcium-tin alloys ensures high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM65X is completely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which allows for safe handling and operation in any position. The battery features self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The casing is made of robust ABS plastic that is impact- and break-resistant and is also available in a flame-retardant version (UL94:V0) upon request. The low self-discharge rate of approximately 3 % per month enables long-term storage while preserving high operational readiness.Features ModelVision 6FM65X Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)65 Max. discharge current650 A (for 5s) Charging voltage (float charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)22.6 ConnectionM6 thread FAQs on the VISION 6FM65X lead-acid batteryWhat applications is the 6FM65X best suited for?This battery is ideal for use in UPS systems, emergency lighting, security and alarm systems, as well as in telecommunications systems. Also for cyclic applications, such as in mobile devices or solar systems, it is a reliable energy source thanks to its robust design.What does the "10-year battery" mean?The addition "10-year battery" refers to the battery’s design life. This means that, under ideal conditions (float charge at 20 °C), the battery has a life expectancy of up to 10 years. The actual service life may vary depending on the individual operating conditions, such as depth of discharge and ambient temperature.Is the battery maintenance-free?Yes, thanks to AGM technology, the battery is completely maintenance-free. The electrolyte is bound in the mat, which means that topping up with water is not necessary.Can the battery be installed flexibly?Yes, the battery can be operated in any position. The exception is permanent overhead mounting, which should be avoided.What charging parameters apply to the battery?For float charging, we recommend a voltage of 13.6 V to 13.8 V. In cyclic operation, i.e. with regular charging and discharging, the charging voltage should be between 14.4 V and 14.7 V.
Vision Lead-acid battery CP1232 with 12V and 3.2Ah
The Vision CP1232 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 3.2 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, particularly in security and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact power: 3.2 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104100 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1232 delivers a rated capacity of 3.2 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its applications range from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is completely bound within a glass fibre mat, the CP1232 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features ModelVision CP1232 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)3.2 (at a 20-hour rate) Maximum discharge current48A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1232 lead-acid batteryWhat applications is the CP1232 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applications Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1232?The service life in standby mode (e.g. in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category ‘Standard Commercial’.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1232 is a very common replacement battery for many alarm systems and emergency lighting systems. Before purchasing, please compare the voltage (12V), capacity (3.2Ah), dimensions and connector type (Faston 4.8 mm) with your old battery to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.96 A to maximise the battery’s service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick and tool-free installation.
Vision Lead-acid battery CP1290F2 with 12V and 9Ah
The Vision CP1290F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 9 Ah capacity. This highly versatile and reliable general-purpose battery has been designed for long service life in standby operation as well as light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery provides safe and consistent power for a wide range of applications, from backup power in UPS systems to safety-critical alarm systems.Highlights at a glanceHigh capacity: 9 Ah at 12 V for reliable energy supply in standard applications.Long service life: Designed for a service life of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits most common installation spaces for batteries in this power class, often as an upgrade for 7Ah models.Flexible installation: Can be operated in any position, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for a variety of applicationsThe Vision CP1290F2 delivers a nominal capacity of 9 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications with occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is completely bound in a glass fibre mat, the CP1290F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month means it can be stored for a long time while remaining highly ready for use. The durable ABS plastic casing provides excellent protection against shocks and vibration.Features ModelVision CP1290F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)9 (at 20h rate) Maximum discharge current135A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1290F2 lead-acid batteryFor which applications is the CP1290F2 suitable?The battery is ideally suited for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical equipmentModel building and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is necessary and it is protected against leakage.Can I use this 9Ah battery as a replacement for a 7Ah battery?In many cases yes. The CP1290F2 often has the same dimensions as a standard 7Ah battery. If your device has enough space, you can use this battery as an upgrade for longer standby time. Please check the dimensions beforehand and make sure that your charger is suitable for the higher capacity.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1290F2 is a very common replacement battery. Please compare the voltage (12V), capacity (9Ah), dimensions, and especially the connector type (Faston 6.35 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Trickle charge (float): The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charging: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.7 A in order to maximise the battery's service life.What does the Faston 250 connector mean?Faston 250 refers to the type of connector. These are flat plug connectors with a width of 6.35 mm (0.250 inch). Cables with suitable cable lugs are simply plugged onto these contacts, allowing quick and tool-free installation.
Vision Lead-acid battery CP6120F1 with 6V and 12Ah
The Vision CP6120F1 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 6 volts and 12 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for prolonged service life in standby operation as well as for light cyclical requirements. Equipped with maintenance-free AGM technology, this battery delivers safe and consistent power for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a glanceHigh capacity: 12 Ah at 6 V for long-lasting power in compact applications.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common installation spaces for batteries in this performance class.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Tested quality: Manufactured according to the highest quality standards for consistently high reliability.Strong performance for versatile applicationsThe Vision CP6120F1 delivers a nominal capacity of 12 Ah on a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application extends from safety lighting and alarm systems to leisure applications requiring constant and fail-safe power supply.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely contained within a fibreglass mat, the CP6120F1 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3% per month allows long storage with high operational readiness. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Characteristics ModelVision CP6120F1 Battery typeVRLA AGM (standby / all-purpose) Nominal voltage (V)6 Capacity (Ah)12 (at 20h rate) Maximum discharge current130A (for 5 seconds) Charging voltage (trickle charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 50 x 100 Weight (kg)approx. 1.8 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP6120F1 lead-acid batteryWhich applications is the CP6120F1 suitable for?The battery is ideal for a wide range of standby and light cyclical applications:Safety lighting and emergency lighting systemsSafety and alarm technologyAutomatic feeders and agricultural equipmentElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP6120F1 batteries in series to achieve a voltage of 12 V. This is common practice for operating 12V devices. Please ensure that you always use two identical batteries (same model, same age) and connect them correctly.What is the service life of the CP6120F1?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 6.75 V and 6.9 V.Cycle charge: For occasional cyclical charging a voltage between 7.2 V and 7.5 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to maximise the life of the battery.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free assembly.
Vision 6FM80X lead-acid battery with 12V and 80Ah – Long-life 10-year standby battery
The Vision 6FM80X is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 80 Ah capacity, specially developed for long-term standby operation. Equipped with maintenance-free AGM technology and designed for 10 years of service life, this battery provides safe and durable emergency power for safety-critical and industrial applications. Whether in UPS systems or in safety technology, the 6FM80X meets the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20°C.High capacity: 80 Ah at 12 V for long-lasting energy supply in case of power failure.Maintenance-free: Completely sealed AGM technology with efficient gas recombination eliminates the need for topping up with water.High operational safety: Leak-proof design and a sturdy case ensure safe operation in any installation position.Low self-discharge: Enables long storage capability and ensures high operational readiness.Flexible installation: Operation possible in all positions, with the exception of permanent overhead use.Reliable performance for safety-critical applicationsThe Vision 6FM80X delivers a capacity of 80 Ah at 20-hour discharge (C20) and 74.4 Ah at 10-hour discharge (C10). Its design is optimised for parallel standby operation, in which it is constantly maintained at charging voltage to provide full power immediately in the event of a power failure. With low internal resistance and high short-circuit current tolerance, the battery is capable of delivering high currents even for demanding loads for a short period.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with electrolyte bound in glass fibre fleece (AGM system), the 6FM80X is completely maintenance-free and leak-proof. The battery is equipped with self-regulating safety valves which ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available as a flame-retardant version according to UL94:V0 if required and is thus ideally suited for use in safety-critical systems.Characteristics ModelVision 6FM80X Battery typeVRLA AGM (Standby) Nominal voltage (V)12 Capacity (Ah)80 (at 20h rate) Maximum discharge current800A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Maximum charging current24A Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 50 Design lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)350 x 167 x 179 Weight (kg)approx. 24.0 ConnectionM6 female thread CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision 6FM80X lead-acid batteryFor which applications is the 6FM80X suitable?The battery is ideal for standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and mobile base stationsMedical and clinical equipmentControl and automation technologyWhat exactly does "10-year battery" mean?The term "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20°C. The actual service life achieved depends heavily on operating conditions such as ambient temperature, charging voltage and the frequency of discharges.What is the difference to a cyclic battery?A standby battery like the 6FM80X is optimised for long service life at constant float charge with infrequent discharges. A cyclic battery, on the other hand, is designed for frequent deep discharges and recharges, as is the case with solar installations or electric vehicles. Using a standby battery in a cyclic application would significantly shorten its lifespan.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely used in devices and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in all positions except permanently upside down. This enables flexible installation in a wide variety of devices and systems.
Vision Lead-acid battery CP672 with 6V and 7.2Ah
The Vision CP672 is a high-quality, valve-regulated lead-acid (VRLA) battery with 6 Volt nominal voltage and 7.2 Ah capacity. This highly versatile and reliable general-purpose battery is designed for a long service life in standby operation as well as for light cyclical demands. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power supply for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a glanceHigh capacity: 7.2 Ah at 6 V for a long-lasting power supply in compact applications.Long service life: Designed for a service life of up to 5 years in standby operation (Float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured according to the highest quality standards for consistently high reliability.Powerful performance for versatile applicationsThe Vision CP672 provides a nominal capacity of 7.2 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation but is also suitable for applications with occasional charge and discharge cycles. Its scope of application ranges from security lighting and alarm systems to leisure applications where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP672 is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 on request.Features ModelVision CP672 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)7.2 (at 20h rate) Maximum discharge current108A (for 5 seconds) Charging voltage (float charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 34 x 100 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP672 lead-acid batteryFor which applications is the CP672 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Safety lighting and emergency lighting systemsSecurity and alarm technologyAutomatic feeders and agricultural equipmentElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP672 batteries in series to obtain a voltage of 12 V. This is common practice to operate 12V devices. Please always make sure to use two identical batteries (same model, same age) and to connect them correctly.What is the service life of the CP672?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 6.75 V and 6.9 V.Cyclic charge: For occasional cyclical charging, a voltage between 7.2 V and 7.5 V is recommended.Maximum charge current: Charge current should not exceed 2.16 A to maximise battery life.What does the Faston 187 terminal type mean?Faston 187 refers to the type of terminal. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply pushed onto these contacts, allowing quick and tool-free installation.
Vision Lead-acid battery CP12200X with 12V and 20Ah
The Vision CP12200X is a highly reliable, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 20 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12200X fulfils the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 20 Ah at 12 V for long-lasting power supply in an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: Leak-proof design and a robust housing ensure safe operation.Low self-discharge: Enables a long shelf life and ensures high readiness for use.Flexible installation: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12200X provides a capacity of 20 Ah at a 20 hour discharge. Its design is optimised for standby parallel operation, where it is continuously kept at charging voltage in order to provide full performance immediately in the event of a power failure. With its low internal resistance, the battery is capable of supplying high currents for short periods, making it an ideal choice for demanding UPS systems and other safety-relevant systems.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in fibreglass fleece (AGM system), the CP12200X is absolutely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in case of overcharging. The low self-discharge of less than 3 % per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 if required.Features ModelVision CP12200X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)20 (at 20h rate) Maximum discharge current300A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 6.0 ConnectionM5 screw terminal CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12200X lead-acid batteryFor which applications is the CP12200X suitable?The battery is ideally suited for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devicesWhat does the long service life of up to 10 years mean?The indication "10 years" refers to the constructive service life (design life) of the battery in standby parallel operation, also called float operation, at a constant ambient temperature of 20°C. The actual service life achieved depends greatly on operating conditions such as ambient temperature, charging voltage and frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12200X uses higher-quality materials and a more robust grid design than standard batteries. This results in less corrosion and wear during continuous charging, which enables the significantly longer service life in standby operation and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum maintenance of the battery.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water and it can be operated safely in equipment and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for a permanently overhead mounted position. This enables flexible installation in a wide variety of equipment and systems.
Vision Lead-acid battery CP6120F2 Faston 6.3mm 6 V 12 Ah
The Vision CP6120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 6 Volt nominal voltage and 12 Ah capacity. This highly versatile and reliable multi-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm connectors, this battery provides safe and consistent power supply for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a GlanceHigh capacity: 12 Ah at 6 V for long-lasting power in compact applications.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Completely sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits into the most common installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards for consistently high reliability. Strong Performance for Versatile ApplicationsThe Vision CP6120F2 delivers a nominal capacity of 12 Ah for a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is also suitable for applications with occasional charge-discharge cycles. Its fields of application range from emergency lighting and alarm systems to leisure applications where a constant and fail-safe power supply is essential.Robust Technology for Demanding EnvironmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP6120F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month ensures long shelf life and high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features ModelVision CP6120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)12 (at 20h rate) Maximum discharge current130A (for 5 seconds) Charging voltage (float charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 50 x 100 Weight (kg)approx. 1.8 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP6120F2 Lead-Acid BatteryWhat applications is the CP6120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Emergency lighting and emergency lighting systemsSecurity and alarm technologyAutomatic feeders and agricultural devicesElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP6120F2 batteries in series to obtain a voltage of 12 V. This is a common practice to operate 12 V devices. Please always ensure that you use two identical batteries (same model, same age) and connect them correctly.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connectors?The difference is in the width of the flat connector. The F2 connector, also called Faston 250, is 6.35 mm wide, while the F1 connector (Faston 187) is only 4.8 mm wide. The wider F2 connector can transmit higher currents better. Please check which connector type your device needs before purchasing.What charging parameters apply to this battery?Trickle charge (float): The recommended voltage is between 6.75 V and 6.9 V at 20 °C.Cyclic charge: For occasional cyclic charging, a voltage between 7.2 V and 7.5 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to maximise the service life of the battery.What is the service life of the CP6120F2?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".
VISION lead-acid battery 6FM200DX with 12V and 200Ah
The Vision 6FM200DX is a cycle-resistant, valve-regulated lead battery (VRLA) with 12 volts nominal voltage and 200 ampere hours capacity. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery provides a reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems which require high cycle durability and deep discharges and is excellently suited for cyclical as well as standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.High capacity: 200 Ah at 12 V for long-lasting and stable power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C, which enables long-term storage.Flexible installation: Operation is possible in various positions, except permanent overhead installation.Durable: A service life of up to 10 years in design life.Strong performance for cyclical applicationsThe 6FM200DX reliably supplies power in recurring discharge cycles. With a capacity of 200 Ah in a 10-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which uses lead-calcium-tin alloys, enables high cycle durability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM200DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre fleece, which allows safe handling and operation in any position. The battery has self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge rate of about 3 % per month enables long-term storage with high operational readiness.Characteristics ModelVision 6FM200DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)200 (at 10h rate) Max. discharge current1000 A (for 5s) Charge voltage (float charge)13.6 V to 13.8 V Charge voltage (cycle operation)14.4 V to 14.7 V Operating temperature (°C)Charge: -10 ~ 60 / Discharge: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)522 x 238 x 218 Weight (kg)65 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM200DX lead batteryFor which applications is the 6FM200DX best suited?This battery has been specially developed for cyclical applications in which the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to cope with a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 200 Ah. Please observe the charging voltages recommended by the manufacturer: for float charging 13.6 V to 13.8 V and for cycle charging 14.4 V to 14.7 V. A charging current of over 60 A can shorten the battery's service life.How long does the 6FM200DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends heavily on the individual operating conditions, the depth of discharge and the ambient temperature. For example, more than 600 cycles can be achieved with 50 % depth of discharge.
Vision lead-acid battery 6FM150DX with 12V and 150Ah
The Vision 6FM150DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 150 ampere hours capacity. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle strength and deep discharges and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.High capacity: 150 Ah at 12 V for long-lasting and stable power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only around 3 % capacity loss per month at 20 °C, which makes long-term storage possible.Flexible installation: Operation is possible in various positions, except for permanent overhead installation.Long service life: A service life of up to 10 years in design life.Strong performance for cyclic applicationsThe 6FM150DX reliably provides power in recurring discharge cycles. With a capacity of 150 Ah at a 10-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy demand. Its special construction, which uses lead-calcium-tin alloys, enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM150DX is completely maintenance-free and leak-proof. The electrolyte is safely bound in a glass fibre mat, which allows safe handling and operation in any position. The battery is equipped with self-sealing low-pressure relief valves that ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of around 3 % per month enables long-term storage with high operational readiness.Characteristics ModelVision 6FM150DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)150 (at 10h rate) Max. discharge current1000 A (for 5s) Charging voltage (float charging)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)485 x 172 x 240 Weight (kg)47 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM150DX lead-acid batteryFor which applications is the 6FM150DX best suited?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as the main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger that is suitable for AGM batteries with a capacity of 150 Ah. Please observe the charging voltages recommended by the manufacturer: for float charge operation 13.6 V to 13.8 V and for cycle charge operation 14.4 V to 14.7 V.How long does the 6FM150DX battery last?The service life of the battery is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, depth of discharge and ambient temperature. For example, over 650 cycles can be achieved when used with 50 % depth of discharge.
Vision lead-acid battery 6FM134DX with 12V and 134Ah
The Vision 6FM134DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 134 ampere hours. It is specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideal for cyclical as well as standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charging and discharging cycles, which considerably extends the service life compared to conventional VRLA batteries.High capacity: 134 Ah at 12 V for long-lasting and stable energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C, which enables long-term storage.Flexible installation: Operation is possible in various positions, except for permanent overhead installation.Long service life: A service life of up to 10 years in Design Life.Strong performance for cyclical applicationsThe 6FM134DX reliably delivers power in recurring discharge cycles. With a capacity of 134 Ah at a 20-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy needs. Its special design, which uses lead-calcium-tin alloys, enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM134DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery has self-closing low-pressure relief valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) upon request. The low self-discharge of about 3 % per month enables long-term storage with high readiness for use.Characteristics ModelVision 6FM134DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)134 (at 20h rate) Max. discharge current950 A (for 5s) Charge voltage (float charge)13.6 V to 13.8 V Charge voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharge: -20 ~ 60 Service lifeup to 10 years (according to Design Life) Dimensions (L/W/H, mm)341 x 173 x 283 Weight (kg)40.0 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM134DX lead-acid batteryFor which applications is the 6FM134DX best suited?This battery was specially developed for cyclical applications where the battery is regularly discharged and recharged. It is ideal as the main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend the use of a charger suitable for AGM batteries with a capacity of 134 Ah. Observe the charging voltages recommended by the manufacturer: for buffer charging (float operation) 13.6 V to 13.8 V and for cycle charging (boost operation) 14.4 V to 14.7 V. A charging current of more than 40 A can shorten the battery's service life.How long does the 6FM134DX battery last?The expected service life of the battery is up to 10 years at 20 °C in Design Life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature. For example, over 650 cycles can be achieved when used at 50% depth of discharge.
VISION lead-acid battery 6FM120DX with 12V and 120Ah
The Vision 6FM120DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 120 ampere hours capacity. It is specially designed for demanding applications with recurring charging and discharging cycles. Equipped with the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideal for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, significantly extending the life compared to conventional VRLA batteries.High capacity: 120 Ah at 12 V for a long-lasting and stable power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3% capacity loss per month at 20°C, which allows long-term storage.Flexible installation: Operation is possible in different positions, except for permanent overhead mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM120DX reliably delivers power in recurring discharge cycles. With a capacity of 120 Ah at a 10-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which utilises lead calcium tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM120DX is absolutely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure relief valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is optionally also available in a flame-retardant version (UL94:V0). The low self-discharge rate of about 3% per month allows long-term storage while maintaining high readiness for use.Features ModelVision 6FM120DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)120 (at 10h rate) Max. discharge current950 A (for 5s) Charging voltage (float charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (as per design life) Dimensions (L/W/H, mm)410 x 176 x 227 Weight (kg)38.0 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM120DX Lead Battery For which applications is the 6FM120DX best suited?This battery was specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power source for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunications systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or lifespan. This distinguishes it from conventional lead-acid batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger that is designed for AGM batteries with a capacity of 120 Ah. Pay attention to the charging voltages recommended by the manufacturer: for buffer charging (float mode) 13.6 V to 13.8 V and for cyclic charging (boost mode) 14.4 V to 14.7 V. A charging current higher than 36 A can shorten the battery's lifespan.How long does the 6FM120DX battery last?The expected lifespan of the battery is up to 10 years at 20°C in design life. However, the actual service life depends heavily on individual operating conditions, depth of discharge, and ambient temperature. For example, with 50% depth of discharge, more than 650 cycles can be achieved.
Vision lead-acid battery 6FM100DX with 12V and 100Ah
The Vision 6FM100DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with 12 volt nominal voltage and 100 Ah capacity. It is specially optimised for recurring charge and discharge cycles. Equipped with the AGM technology (Absorbent Glass Mat), this battery provides a reliable, leak-proof and long-lasting power supply. It is ideal for applications requiring high cycle resistance, deep discharges and a long service life.Highlights at a glanceCycle-resistant: Designed for a long cycle life to withstand repeated charging and discharging.High capacity: 100 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only about 3% per month at 20 °C, enabling a long storage period.Flexible installation: Operation is possible in various positions, except for permanent overhead mounting.Durable: Up to 10 years service life in design life.Powerful performance for cyclic applicationsThe 6FM100DX reliably supplies power in recurring discharge cycles. With a capacity of 100 Ah at a 10-hour discharge (up to 1.8 V/cell), this battery is an excellent choice for mobile and cyclic energy needs. Its special construction allows a high load capacity, making it ideal for applications with variable current requirements.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM100DX is absolutely maintenance-free and leak-proof. The electrolyte is securely contained in a fibreglass mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) upon request.Properties ModelVision 6FM100DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)100 (at 10h rate) Max. discharge current900 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)330 x 171 x 215 Weight (kg)32.0 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM100DX lead-acid batteryFor which applications is the 6FM100DX best suited?This battery was specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as golf caddies, wheelchairs, cleaning machines, as well as for solar installations, medical equipment and telecommunications systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to handle a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 100 Ah. Observe the manufacturer-recommended charging voltages: for float charging (standby operation) approx. 13.6 V to 13.8 V and for cycle charging (boost operation) approx. 14.4 V to 14.7 V. Too high a charging current can shorten the life of the battery.How long does the 6FM100DX battery last?The expected service life of the battery is up to 10 years at 20 °C in design life. However, the actual service life depends heavily on individual operating conditions, depth of discharge and temperature. With 50% depth of discharge, for example, over 650 cycles can be achieved.
Vision Lead-acid battery 6FM75TDX Cyclic with 12V and 75Ah
The Vision 6FM75TDX is a high-performance, cycle-proof and valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 75 Ah capacity. Designed for demanding cyclic applications, this battery combines maintenance-free AGM technology with a robust design. It offers a reliable and long-lasting energy solution for applications where repeated charging and discharging is a daily occurrence, such as in solar technology, mobile applications or rehabilitation technology.Highlights at a glanceHigh cycle stability: Developed for demanding cyclic use with a long service life.Strong capacity: 75 Ah at 12 V for long-lasting and reliable power supply.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after longer periods of disuse.Flexible installation: Operation is possible in all positions, with the exception of continuous upside-down use.Robust construction: The durable ABS plastic housing reliably protects the battery against mechanical impact.Reliable energy for demanding cyclesThe Vision 6FM75TDX has been specially optimised for cyclic operation. It delivers a nominal capacity of 75 Ah on a 20-hour discharge (C20). Its particular strength lies in its ability to be repeatedly deeply discharged and recharged without significant loss of capacity. This makes it the ideal choice for solar installations, electric vehicles and other mobile power supplies that require constant and reliable performance.Advanced technology for maximum longevityThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, where the electrolyte is contained in a glass fibre mat, the 6FM75TDX is fully sealed and maintenance-free. This not only prevents leaks, but also enables efficient gas recombination within the cell. The battery features low internal resistance, allowing high current draw. The low self-discharge rate ensures that the stored energy is preserved for long periods, which is particularly advantageous for seasonally used equipment.Features ModelVision 6FM75TDX Cyclic Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)75 (at 20h rate) Maximum discharge current750A (for 5 seconds) Charge voltage (float)13.6V - 13.8V Charge voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 600 cycles at 80% depth of discharge Dimensions (L/W/H, mm)260 x 168 x 214 Weight (kg)approx. 23.5 ConnectionM6 internal thread CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision 6FM75TDX lead-acid batteryFor which applications is the Vision 6FM75TDX suitable?This battery is specially designed for cyclic applications and is excellently suited for:Solar and photovoltaic off-grid systemsMotorhomes, caravans and boatsElectric wheelchairs and mobility scootersCleaning machines and automated guided vehicles (AGVs)Uninterruptible power supplies (UPS) with high cycle requirementsWhat does the term "cycle-proof" mean?Cycle-proof means that the battery is designed to be frequently and deeply discharged and then fully recharged. Unlike a conventional starter battery, which is designed for short, high current surges, a cycle-proof battery retains its capacity over many of these charge and discharge cycles.Is the battery completely maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.How should the battery be charged to maximise its service life?For maximum service life, we recommend using a good quality charger with an IUoU charging profile suitable for AGM batteries. The charging voltage should be between 14.4 V and 15.0 V in cyclic operation at 20 °C. The maximum charging current should not exceed 22.5 A.Can I connect several of these batteries together?Yes, you can connect several Vision 6FM75TDX batteries in series to increase the voltage (e.g. two for a 24 V system), or in parallel to increase the capacity. Please ensure that you only connect batteries of the same type, age and state of charge.What storage conditions and temperature ranges apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CAlways store the battery fully charged in a cool, dry place. Due to the low self-discharge rate, recharging is only required every six months during longer storage.
Vision lead-acid battery 6FM55DX with 12V and 55Ah
The Vision 6FM55DX is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 55 ampere hours. It has been specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideal for cyclical as well as standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charging and discharging cycles.High capacity: 55 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in different positions, except for permanent overhead installation.Long service life: A service life of up to 10 years in the design life.High performance for cyclical applicationsThe 6FM55DX reliably supplies power in recurring discharge cycles. With its capacity of 55 Ah, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special design, which utilises lead-calcium-tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM55DX is absolutely maintenance-free and leak-proof. The electrolyte is securely bound in glass fibre fleece, ensuring safe handling and operation in any position. The battery has self-sealing low pressure relief valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is impact and break-resistant and, if required, is also available in a flame-retardant version (UL94:V0). The low self-discharge rate of about 3 % per month enables long-term storage with high operational readiness.Characteristics ModelVision 6FM55DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)55 ConnectionM6 screw terminal Dimensions (L/W/H, mm)239 x 132 x 205 Weight (kg)18 Operating temperature range (°C)-20 to +60 Service lifeup to 10 years (according to design life) FAQs on the VISION 6FM55DX lead-acid batteryFor which applications is the 6FM55DX best suited?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunication systems and mobile measuring instruments.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 55 Ah. Observe the charging voltages recommended by the manufacturer. Too high a charging current can shorten the battery's service life.How long does the 6FM55DX battery last?The service life of the battery is up to 10 years at 20 °C in the designed life. However, the actual service life depends strongly on the individual operating conditions, the depth of discharge and the ambient temperature.
Vision lead-acid battery 6FM50DX with 12V and 50Ah
The Vision 6FM50DX is a robust, cycle-resistant lead-acid battery (VRLA) with 12 volts nominal voltage and a capacity of 50 ampere-hours. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle resistance and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charge and discharge cycles.High capacity: 50 Ah at 12 V (20-hour rate) for long-lasting energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent upside-down mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM50DX reliably delivers power in recurring discharge cycles. Its capacity is 50 Ah at a 20-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM50DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre mat, enabling safe handling and operation in any position. The battery is equipped with self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is impact and break-resistant and is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of about 3% per month enables long-term storage while maintaining a high level of operational readiness.Features ModelVision 6FM50DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)50 (at 20h rate) Max. Discharge current450 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)14.6 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM50DX lead-acid batteryWhat applications is the 6FM50DX best suited for?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunications systems and mobile measuring devices. The battery also holds VdS approval, making it ideal for safety-critical applications such as fire and intruder alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significant loss of capacity or service life. This sets it apart from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 50 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging (standby mode) and 14.4 V to 14.7 V for cycle charging (boost mode). Excessive charging current can shorten the battery's service life..How long does the 6FM50DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature.
Vision Lead-acid battery CP12240DX Cyclic with 12V and 24Ah
The Vision CP12240DX is a high-performance, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 24 Ah. This battery has been specially developed for demanding cyclical applications where regular and deep discharge is the order of the day. Equipped with robust, maintenance-free AGM technology, it is the ideal energy source for mobile applications in rehabilitation technology, for electric vehicles or in the leisure sector.Highlights at a glanceHigh cycle stability: Developed for a long service life with repeated, deep discharge and recharging.High capacity: 24 Ah at 12 V for a long-lasting and reliable power supply for mobile consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High power density: Offers a lot of energy in a compact and widely used housing format.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: Enables longer shelf life without significant loss of capacity.High performance for cyclic applicationsThe Vision CP12240DX reliably delivers a capacity of 24 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it a high resistance to the stresses of constant charging and discharging. This makes it the perfect choice for electric wheelchairs, golf caddies, e-scooters and other electric vehicles where maximum cycling and reliability are important.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, in which the electrolyte is securely bound in a glass fibre fleece, the CP12240DX is completely sealed, leak-proof and vibration-resistant. The low internal resistance enables efficient energy output even at higher currents. The housing made of robust ABS plastic reliably protects the internal components from mechanical stress in everyday mobile use and ensures a long and safe service life.Battery features ModelVision CP12240DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 2000 cycles at 30% depth of discharge Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 7.8 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12240DX lead-acid batteryWhat applications is the CP12240DX suitable for?The battery is ideal for a variety of demanding cyclic applications:Electric wheelchairs, mobility scooters and scootersGolf caddies and other light electric vehiclesMedical devices such as patient liftsMobile cleaning machinesMarine and camping applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage in any position.What is the difference to a standard AGM battery?The CP12240DX is designed as a cycle-proof battery. It uses reinforced lead plates and special additives that make it more resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby operation (e.g. in UPS systems) and would lose capacity more quickly during cyclical use.Can the battery be installed flexibly?Yes, the battery can be operated in all positions with the exception of a permanently upside down position. This enables flexible installation in a wide range of devices and vehicles.What are the charging parameters for this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Float charge voltage (20 °C): approx. 13.5 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 7.2 A. The use of a suitable charger is crucial for a long service life.Can two of these batteries be connected to form a 24V system?Yes, you can easily connect two CP12240DX batteries in series to create a 24V system. This is a very common configuration in electric wheelchairs and scooters. Please always use two new, identical batteries for this.
Vision Lead-acid battery CP12180DX Cyclic with 12V and 18Ah
The Vision CP12180DX is a high-performance, cycle-proof and valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 18 Ah capacity. This battery has been specially developed for demanding cyclic use, where regular and deep discharge is the norm. Equipped with sturdy, maintenance-free AGM technology, it is the ideal energy source for mobile applications in rehabilitation technology, for electric vehicles or for leisure use.Highlights at a GlanceHigh cycle stability: Designed for a long service life during repeated, deep discharge and recharging.Strong capacity: 18 Ah at 12 V for enduring and reliable energy supply for mobile consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures a leak-proof and maintenance-free operation.High power density: Offers a lot of energy in a compact and widely used housing format.Flexible mounting: Operation possible in all positions, except for permanent upside-down use.Low self-discharge: Enables longer shelf life with no significant capacity loss. Strong Performance for Cyclical ApplicationsThe Vision CP12180DX reliably delivers a capacity of 18 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it high resistance to the stresses of constant charging and discharging. This makes it the perfect choice for electric wheelchairs, golf caddies, e-scooters and other electric vehicles where maximum cycle life and reliability are important.Robust Technology for Demanding EnvironmentsThanks to the VRLA technology (Valve Regulated Lead Acid) in conjunction with the AGM system, where the electrolyte is safely held in a glass fibre mat, the CP12180DX is fully sealed, leak-proof and vibration-resistant. The low internal resistance allows efficient energy delivery even at higher currents. The housing made from robust ABS plastic reliably protects the internal components from mechanical loads in daily mobile use and ensures a long, safe service life.Properties ModelVision CP12180DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)18 (at 20h rate) Maximum discharge current270A (for 5 seconds) Charging voltage (float charging)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 1800 cycles at 30% depth of discharge Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw terminal CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12180DX Lead-Acid BatteryFor which applications is the CP12180DX suitable?The battery is ideally suited for a wide variety of demanding cyclic applications:Electric wheelchairs, mobility scooters and scootersGolf caddies and other lightweight electric vehiclesMedical devices such as patient liftsMobile cleaning machinesApplications in marine and camping areasIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference to a standard AGM battery?The CP12180DX is designed as a cycle-proof battery. It uses reinforced lead plates and special additives, which make it more resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby use (e.g. in UPS systems) and would lose capacity more quickly with cyclic use.Can the battery be installed flexibly?Yes, the battery can be operated in all positions, except for permanent upside-down mounting. This enables flexible installation in a wide variety of devices and vehicles.What charging parameters apply to this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Float charge voltage (20 °C): approx. 13.5 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 5.4 A. Using a suitable charger is crucial for a long service life.Can two of these batteries be connected to form a 24V system?Yes, you can easily connect two CP12180DX batteries in series to create a 24V system. This is a very common configuration in electric wheelchairs and mobility scooters. Please always use two new, identical batteries for this purpose.
Vision Lead-acid battery CP12120D Cyclic with 12V and 12Ah
The Vision CP12120D is a high-quality, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This battery has been specially developed for demanding cyclic applications and combines a robust design with reliable and maintenance-free AGM technology. It is the ideal energy source for applications that require regular and deep discharge, such as in rehabilitation technology, e-scooters or mobile leisure activities.Highlights at a glanceHigh cycle stability: Designed for a long service life with up to 1600 cycles at 30% depth of discharge.Compact energy: Provides 12 Ah capacity at 12 V in a handy and widely used case format.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High current carrying capacity: Suitable for consumers with short-term high starting current.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after extended periods of non-use.High performance for cyclic applicationsThe CP12120D reliably delivers 12 Ah with a 20-hour discharge (C20). Its strength lies in its high cycle resistance, making it suitable for repeated use. It was designed to ensure stable performance and fast rechargeability even after deep discharges. This makes it the perfect choice for electric vehicles, medical equipment and other mobile applications where reliability is paramount.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) combined with the AGM system, where the electrolyte is safely held in a glass fibre mat, the CP12120D is fully sealed and maintenance-free. This not only prevents acid from leaking, but also ensures high vibration resistance. The low internal resistance of about 18 mΩ enables efficient energy discharge. The case made of robust ABS plastic reliably protects the internal components from mechanical stresses during daily use.Features ModelVision CP12120D Cyclic Battery typeVRLA AGM (Cycle-resistant) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.6V - 13.8V Charging voltage (cyclic operation)14.5V - 14.9V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 1600 cycles at 30% depth of discharge Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.6 ConnectionFaston 6.3 mm CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12120D lead-acid batteryFor which applications is the CP12120D suitable?The battery is ideal for a variety of cyclic applications:Electric wheelchairs, scooters and other rehab technologyToys and children's electric vehiclesMobile lighting and sound systemsEcho sounders and power supply for fishing boatsCamping and leisure activities Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaks in any position.What is the service life of the CP12120D?Service life in cyclic operation is very high and depends on the depth of discharge. With regular discharging to 30%, for example, the battery can achieve up to 1600 cycles.Can the battery be flexibly installed?Yes, the battery can be operated in all positions, with the exception of permanent overhead installation. This enables flexible installation in various devices.What are the charging parameters for this battery?Cyclic charging voltage (20°C): about 14.5 V to 14.9 V.Float charge voltage (20°C): about 13.6 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 3.6 A. Exceeding this may reduce the service life.Can I use this battery as a replacement for a standard lead-acid battery?Yes, in many cases this AGM battery can replace a conventional lead-acid or gel battery with the same specifications (voltage, capacity and dimensions) and often offers advantages such as higher cycle stability and absolute maintenance freedom.
Vision Lead-acid battery CP1229 with 12V and 2.9Ah
The Vision CP1229 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 2.9 Ah. This compact and reliable all-purpose battery is designed for long-term service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable power supply for a wide variety of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact energy: 2.9 Ah capacity at 12 V for reliable power supply with low space requirements.Long service life: Designed for a service life of up to 5 years in standby use (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Provides a stable voltage level and low self-discharge.Flexible installation: Operation is possible in all positions except for permanent overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devicesPowerful performance for versatile applicationsThe Vision CP1229 delivers a nominal capacity of 2.9 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application ranges from alarm systems and UPS systems to mobile medical devices where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1229 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of under 3% per month allows for long storage periods with high readiness. The sturdy ABS plastic housing offers excellent protection against shocks and vibrations.Properties ModelVision CP1229 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.9 (at 20h rate) Maximum discharge current43.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)79 x 56 x 105 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1229 lead-acid batteryFor which applications is the CP1229 suitable?The battery is ideal for a wide range of standby and light cyclical applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. It does not require topping up with distilled water and is protected against leakage.What is the service life of the CP1229?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1229 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.9Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycling charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.87 A in order to maximise battery life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables quick and tool-free installation.
Vision Lead-acid battery CP1270F2 with 12V and 7Ah
The Vision CP1270F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery offers a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment. Powerful performance for versatile applicationsThe Vision CP1270F2 provides a rated capacity of 7 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270F2 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month allows for long storage life with high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features ModelVision CP1270F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1270F2 lead-acid batteryWhat applications is the CP1270F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connection?The difference lies in the width of the flat plug connection. The F2 connection, also called Faston 250, is 6.35 mm wide, while the F1 connection (Faston 187) is only 4.8 mm wide. The wider F2 connection can transmit higher currents better and is often used in more powerful UPS systems. Please check before purchase which connection type your device requires.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270F2 is one of the most common replacement batteries. Please compare before purchase the voltage (12V), the capacity (7Ah), the dimensions and especially the connection type (Faston 6.35 mm) with your old battery to ensure compatibility.Which charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the service life of the battery.What service life does the CP1270F2 have?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".
Vision lead-acid battery 6FM36DX with 12V and 36Ah
The Vision 6FM36DX is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 36 ampere hours. It is specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers reliable, leak-proof and long-lasting power. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle resistant: Developed for a high number of charge and discharge cycles.High capacity: 36 Ah at 12 V (20-hour rate) for a long-lasting power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent overhead installation.Durable: A service life of up to 10 years in the design life.Strong performance for cyclic applicationsThe 6FM36DX reliably delivers power in recurring discharge cycles. Its capacity is 36 Ah for a 20-hour discharge and 33 Ah for a 10-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high resistance to cycles and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM36DX is absolutely maintenance-free and leak-proof. The electrolyte is securely enclosed in a glass fibre mat, which enables safe handling and operation in any position. The battery is equipped with self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is also available as a flame-retardant version (UL94:V0) on request. The low self-discharge rate of around 3 % per month enables long-term storage with high readiness for use.Specifications ModelVision 6FM36DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)36 (at 20h rate) Max. discharge current300 A (for 5s) Charging voltage (maintenance charge)13.6 V to 13.8 V Charging voltage (cycle operation)14.4 V to 14.7 V Operating temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Service lifeup to 10 years (in design life) Dimensions (L/W/H, mm)195 x 130 x 155 Weight (kg)11.4 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL FAQs for VISION 6FM36DX lead-acid batteryWhat applications is the 6FM36DX best suited for?This battery was specifically developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunication systems and mobile measuring equipment.What does "cycle resistant" mean?A cycle-resistant battery is specifically designed to cope with a high number of charge and discharge cycles without significantly losing capacity or service life. This distinguishes it from conventional lead batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 36 Ah. Observe the voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charge operations and 14.4 V to 14.7 V for cycle charging operations. Excessive charging current can shorten the service life of the battery.How long does the 6FM36DX battery last?The service life of the battery is up to 10 years at 20 °C in the design life. However, the actual life depends heavily on the individual operating conditions, the depth of discharge and the ambient temperature. For example, over 650 cycles can be achieved with 50 % depth of discharge, and even over 1500 cycles at 30 % depth of discharge.
Vision Lead-acid battery CP1250HF2 with 12V and 5Ah
The Vision CP1250HF2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 5 Ah capacity. This HF Series battery is a high-current type specifically designed for demanding standby operation. Equipped with maintenance-free AGM technology, this battery provides an extremely reliable power supply for critical applications that require high performance in a short time, such as in uninterruptible power supplies (UPS).Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Reliable capacity: 5 Ah at 12 V for secure power supply with a small footprint.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Flexible mounting: Operation is possible in all positions, except permanent use upside down.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for safety-critical applicationsThe Vision CP1250HF2 delivers a nominal capacity of 5 Ah in a 20-hour discharge. Its particular strength lies in its ability to deliver very high currents for short periods of time. This makes it destined for use in uninterruptible power supplies (UPS) that have to supply high loads when starting up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP1250HF2 is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is available on request also in a flame-retardant version according to UL94:V0.Features ModelVision CP1250HF2 Battery typeVRLA AGM (high current) Nominal voltage (V)12 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.75 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1250HF2 lead-acid batteryFor which applications is the CP1250HF2 suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devicesWhat does the designation "HF" and "high current capability" mean?The designation "HF" for Vision batteries stands for "High Rate" or high current. These batteries are constructed with thinner lead plates and a larger active surface, resulting in reduced internal resistance. This allows them to deliver significantly higher currents for short periods than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference compared to a CP1250A standard battery?Although both have the same capacity and size, the CP1250HF2 is specially optimised for high power delivery. The standard battery CP1250A is an all-purpose type. The HF type is the first choice when maximum power output is required in the first few minutes of a power failure, as is the case in UPS systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water, and it can be safely operated in devices and indoors.Can I use this battery for an electric scooter?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For electric scooters that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by "DX" on Vision), as these achieve a significantly longer service life in cyclic operation.
Vision Lead-acid battery 6FM90DX Cyclic with 12V and 90Ah
The Vision 6FM90DX is a high-performance, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 90 Ah. Designed for demanding cyclic applications, this battery combines maintenance-free AGM technology with a particularly robust design. It offers a reliable and long-lasting energy solution for areas where repeated charging and discharging is required, such as in solar technology, mobile applications or electric vehicles.Highlights at a glanceHigh cycle stability: Developed for demanding cyclic operation and a long service life even with deep discharges.High capacity: 90 Ah at 12 V for a long-lasting and reliable power supply for demanding consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Low self-discharge: With only around 3% self-discharge per month, the battery is immediately ready for use even if it is not used for a longer period of time.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Robust construction: The robust ABS plastic housing reliably protects the battery from mechanical impacts and vibrations.Reliable energy for demanding cyclesThe Vision 6FM90DX has been specially optimised for cyclic use. It delivers a nominal capacity of 90 Ah with a 20-hour discharge (C20). Its particular strength lies in its ability to be repeatedly deep discharged and recharged without significant loss of capacity. This makes it the ideal choice for solar systems, electric vehicles, cleaning machines and other mobile power supplies that require constant and reliable performance.Advanced technology for maximum longevityThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, in which the electrolyte is bound in a glass fibre fleece, the 6FM90DX is completely sealed and maintenance-free. This not only prevents leakage, but also enables efficient gas recombination within the cell. The battery is characterised by a low internal resistance, which allows a high current draw. The low self-discharge ensures that the stored energy is retained over long periods of time, which is particularly advantageous for seasonally used appliances.Characteristics ModelVision 6FM90DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)90 (at 20h rate) Maximum discharge current900A (for 5 seconds) Charging voltage (trickle charge)13.6V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 1300 cycles at 50% depth of discharge Dimensions (L/W/H, mm)307 x 169 x 215 Weight (kg)approx. 27.5 ConnectionM8 internal thread CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision 6FM90DX lead-acid batteryFor which applications is the Vision 6FM90DX suitable?This battery is specially designed for cyclic applications and is ideal for:Solar and photovoltaic off-grid systemsMotorhomes, caravans and boatsElectric wheelchairs and scootersCleaning machines and automated guided vehicles (AGV)Uninterruptible power supplies (UPS) with high cycle requirementsWhat does the term "cyclic" mean?Cycle-proof means that the battery is designed to be frequently and deeply discharged and then fully recharged. In contrast to a conventional starter battery, which is designed for short, high current surges, a cycle-proof battery retains its capacity over many of these charge and discharge cycles.Is the battery completely maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.How should the battery be charged to maximise its service life?To maximise service life, we recommend using a high-quality charger with an IUoU charging characteristic that is suitable for AGM batteries. The charging voltage should be between 14.4 V and 15.0 V in cyclic operation at 20 °C. The maximum charging current should not exceed 27 A.Can I connect several of these batteries together?Yes, you can connect several Vision 6FM90DX batteries in series to increase the voltage (e.g. two for a 24 V system) or in parallel to increase the capacity. Please ensure that you only connect batteries of the same type, age and state of charge to ensure optimum performance and service life.What storage conditions and temperature ranges apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CAlways store the battery in a fully charged state in a cool, dry place. Due to the low self-discharge rate, recharging is only necessary every six months during longer storage periods.
Vision Lead-acid battery CP12170EX with 12V and 17Ah
The Vision CP12170EX is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 17 Ah. This reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceHigh capacity: 17 Ah at 12 V for a long-lasting and reliable power supply.VdS approved: G 104064 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High power density: Offers plenty of power in a compact and widely used housing format.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested safety: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP12170EX delivers a rated capacity of 17 Ah at a 20-hour discharge rate. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. With its low internal resistance, the battery is capable of delivering high currents even for short periods, making it an ideal choice for UPS systems, emergency lighting and other systems with high inrush currents.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is completely bound within a glass fibre mat, the CP12170EX is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features ModelVision CP12170EX Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)17 (at a 20-hour rate) Maximum discharge current255A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.4 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP12170EX lead-acid batteryFor which applications is the CP12170EX suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12170EX?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.Can this battery replace an old battery in my UPS system?Yes, the Vision CP12170EX is a very common replacement battery for many UPS systems. Before purchasing, please compare the voltage (12V), capacity (17Ah), dimensions and connection type (M5 screw connection) with your old battery to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What does the M5 connection type mean?M5 refers to the type of connection. It is a metric thread with a diameter of 5 mm. The cables are usually connected to this battery using screws, often with the aid of cable lugs, which ensures a very secure and firm connection.
Vision Lead-acid battery CP1250A with 12V and 5.2Ah
The Vision CP1250A is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 volt nominal voltage and 5.2 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides a safe and reliable power supply for a wide range of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceReliable capacity: 5.2 Ah at 12 V for a reliable power supply with minimal space requirements.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Ideal for installation in enclosures with limited space.Flexible installation: Operation is possible in all positions, except for permanent overhead installation.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1250A delivers a nominal capacity of 5.2 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation but is also suitable for applications with occasional charging and discharging cycles. Its field of application ranges from alarm systems and UPS units to mobile medical equipment, where a constant and failure-proof power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1250A is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables a long shelf life with high operational readiness. The robust ABS plastic housing provides excellent protection from shocks and vibrations.Features ModelVision CP1250A Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)5.2 (at 20h rate) Maximum discharge current78A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.8 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1250A lead-acid batteryFor which applications is the CP1250A suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1250A?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1250A is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), the capacity (approx. 5Ah), the dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charge current: The charging current should not exceed 1.5 A to maximise the battery's service life.What does the connection type Faston 187 mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, allowing quick and tool-free installation.
Vision EVGT Series lead-acid battery EVGT12-110A-X with 12V and 110Ah
The Vision EVGT12-110A-X is a high-performance, valve-regulated lead-acid (VRLA) battery with 12 volts nominal voltage and 110 Ah capacity, which has been specially developed for the most demanding traction applications. Featuring extremely robust, cycle-resistant AGM technology, this battery provides a reliable and long-lasting power supply for electric vehicles and industrial applications. Whether in daily use in golf trolleys, cleaning machines or lifting platforms, the EVGT12-110A-X meets the highest standards of cycle stability and durability.Key features at a glanceExtreme cycle stability: Designed for demanding deep-cycle operation with a very high number of charge and discharge cycles.Very high capacity: 110 Ah at 12 V for maximum operating times and a long range for electric vehicles.Maintenance-free AGM technology: Advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Robust construction: Reinforced grid plates and high vibration resistance ensure a long service life even under demanding conditions.Flexible installation: Operation is possible in all positions, with the exception of permanent use upside down.Low self-discharge: Enables longer storage without significant loss of capacity. High performance for traction applicationsThe Vision EVGT12-110A-X provides a rated capacity of 110 Ah at a 20-hour discharge. Its design is specifically tailored for cyclic operation, giving it outstanding resilience against the stresses of daily deep discharge and recharging. This makes it the perfect choice for golf buggies, automated guided vehicles (AGVs), cleaning machines and other electric vehicles where maximum cycle life and reliability are what matter.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) combined with the AGM system, in which the electrolyte is securely bound in a glass fibre mat, the EVGT12-110A-X is fully sealed, leak-proof and vibration-resistant. Specially developed, thick grid plates minimise corrosion and maximise service life in cyclic use. The housing made of robust ABS plastic reliably protects the internal components from mechanical stresses in everyday mobile use and ensures a long and safe service life.Features ModelVision EVGT12-110A-X Battery typeVRLA AGM (Deep Cycle / Traction) Nominal voltage (V)12 Capacity (Ah)110 (at 20h rate) Maximum discharge current1100A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 600 cycles at 80% depth of discharge Dimensions (L/W/H, mm)329 x 172 x 218 Weight (kg)approx. 32.5 ConnectionM8 internal thread CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision EVGT12-110A-X lead-acid batteryWhat applications is the EVGT12-110A-X suitable for?The battery is ideal for a wide range of demanding traction and deep-cycle applications:Golf buggies and similar electric vehiclesIndustrial cleaning machinesScissor lifts and articulated boom liftsAutomated guided vehicles (AGVs)Applications in the marine and camping sector with high cycle requirementsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage in any position.What is the difference compared to a standard lead-acid battery?The EVGT12-110A-X is a pure deep-cycle battery. It uses reinforced lead plates and special additives that make it extremely resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby operation (e.g. in UPS systems) and would lose capacity very quickly with daily cyclic use.How should multiple batteries be connected in a vehicle?In electric vehicles such as golf buggies, several batteries are connected in series to increase the system voltage (e.g. three batteries for 36V or four for 48V). It is crucial that you always replace a complete set of identical batteries (same model, same age, same manufacturer) at the same time to ensure balanced performance and maximum service life.What charging parameters apply to this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Maximum charging current: The recommended maximum charging current is 33 A. The use of a high-quality, multi-stage charger with AGM profile is crucial for a long service life.How should the battery be stored in winter?If the vehicle is not used for a longer period, you should fully charge the batteries and store them in a cool, dry place. It is recommended to recharge the batteries every two to three months to avoid deep discharge due to self-discharge and to maintain full performance.