Vision Lead-acid battery CP12240DX Cyclic with 12V and 24Ah

The Vision CP1223 is a high-quality, valve-regulated lead acid battery (VRLA) with 12 volt nominal voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable energy provision for a wide variety of applications, particularly in security and medical technology.Highlights at a glanceCompact energy: 2.3 Ah capacity at 12 V for reliable energy provision in restricted spaces.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Offers a stable voltage position and low self-discharge.Flexible installation: Operation is possible in all positions except permanent upside-down use.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1223 delivers a nominal capacity of 2.3 Ah with a 20 hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its area of application ranges from alarm systems and UPS systems to mobile medical devices where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1223 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables long storage life with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1223 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (maintenance charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1223 lead-acid batteryFor which applications is the CP1223 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to refill with distilled water and it is protected against leaks.What is the service life of the CP1223?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A in order to maximise the battery’s service life.What does the Faston 187 connector mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free installation.

The Vision CP1270 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power for a wide range of applications, from emergency backup in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power in standard applications.Long service life: Designed for a lifespan of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits in most standard installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1270 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its areas of use range from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month enables long storage capability with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1270 lead-acid batteryFor which applications is the CP1270 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lighting. Please compare the voltage (12V), the capacity (7Ah), the dimensions and the connector type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20°C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise battery service life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables fast and tool-free installation.

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP Series was developed for high reliability in standby operation and for light cyclic applications. Equipped with maintenance-free AGM technology, this battery offers safe and long-lasting energy supply for a wide range of applications, from security technology to emergency power supply.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting energy supply.Long service life: Designed for a service life of up to 5 years in standby operation at 20°C.Maintenance-free: Leakproof and sealed AGM technology with a gas recombination rate of over 99%.High current capacity: Suitable for devices that require high inrush current for short periods.Flexible installation: Operation is possible in all positions, except permanent upside-down use.Tested quality: Manufactured according to ISO9001 and ISO14001 standards for consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 provides a capacity of 12 Ah at a 20-hour discharge. It is designed as a general-purpose battery and is effective both in standby parallel operation (float) and with occasional cyclical discharges. With a maximum discharge current of 180A for 5 seconds, this battery is also ideally suited for short-term power peaks, as required in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is bound in a glass fibre mat, the CP12120F2 is absolutely maintenance-free and leakproof. This ensures safe operation in sensitive environments. The low self-discharge rate of around 3% per month enables long shelf life with high operational readiness. The robust ABS plastic housing offers excellent protection against mechanical influences.Features  ModelVision CP12120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12120F2 lead-acid batteryFor which applications is the CP12120F2 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (BMA)Emergency lightingMedical devicesTelecommunication systemsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaking.What is the service life of the CP12120F2?The service life in standby operation (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20°C and thus corresponds to the EUROBAT category "Standard Commercial".What is the difference between this battery and a purely cyclic type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A purely cyclic battery is specially designed for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cyclic type would deliver a longer service life.What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 13.5V and 13.8V.Cyclic charge: For occasional cyclic charging a voltage between 14.4V and 15.0V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to avoid impairing service life.What are the temperature ranges and storage conditions?Charging: 0°C to +40°CDischarging: -20°C to +50°CStorage (fully charged): -20°C to +40°CSelf-discharge: about 3% per month at 20°C. For longer storage, it is recommended to recharge the battery every 6 months. 

The Vision CP12200X is a highly reliable, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 20 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12200X fulfils the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 20 Ah at 12 V for long-lasting power supply in an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: Leak-proof design and a robust housing ensure safe operation.Low self-discharge: Enables a long shelf life and ensures high readiness for use.Flexible installation: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12200X provides a capacity of 20 Ah at a 20 hour discharge. Its design is optimised for standby parallel operation, where it is continuously kept at charging voltage in order to provide full performance immediately in the event of a power failure. With its low internal resistance, the battery is capable of supplying high currents for short periods, making it an ideal choice for demanding UPS systems and other safety-relevant systems.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in fibreglass fleece (AGM system), the CP12200X is absolutely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in case of overcharging. The low self-discharge of less than 3 % per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 if required.Features  ModelVision CP12200X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)20 (at 20h rate) Maximum discharge current300A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 6.0 ConnectionM5 screw terminal CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12200X lead-acid batteryFor which applications is the CP12200X suitable?The battery is ideally suited for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devicesWhat does the long service life of up to 10 years mean?The indication "10 years" refers to the constructive service life (design life) of the battery in standby parallel operation, also called float operation, at a constant ambient temperature of 20°C. The actual service life achieved depends greatly on operating conditions such as ambient temperature, charging voltage and frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12200X uses higher-quality materials and a more robust grid design than standard batteries. This results in less corrosion and wear during continuous charging, which enables the significantly longer service life in standby operation and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum maintenance of the battery.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water and it can be operated safely in equipment and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for a permanently overhead mounted position. This enables flexible installation in a wide variety of equipment and systems.

The Vision CP12120D is a high-quality, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This battery has been specially developed for demanding cyclic applications and combines a robust design with reliable and maintenance-free AGM technology. It is the ideal energy source for applications that require regular and deep discharge, such as in rehabilitation technology, e-scooters or mobile leisure activities.Highlights at a glanceHigh cycle stability: Designed for a long service life with up to 1600 cycles at 30% depth of discharge.Compact energy: Provides 12 Ah capacity at 12 V in a handy and widely used case format.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High current carrying capacity: Suitable for consumers with short-term high starting current.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after extended periods of non-use.High performance for cyclic applicationsThe CP12120D reliably delivers 12 Ah with a 20-hour discharge (C20). Its strength lies in its high cycle resistance, making it suitable for repeated use. It was designed to ensure stable performance and fast rechargeability even after deep discharges. This makes it the perfect choice for electric vehicles, medical equipment and other mobile applications where reliability is paramount.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) combined with the AGM system, where the electrolyte is safely held in a glass fibre mat, the CP12120D is fully sealed and maintenance-free. This not only prevents acid from leaking, but also ensures high vibration resistance. The low internal resistance of about 18 mΩ enables efficient energy discharge. The case made of robust ABS plastic reliably protects the internal components from mechanical stresses during daily use.Features  ModelVision CP12120D Cyclic Battery typeVRLA AGM (Cycle-resistant) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.6V - 13.8V Charging voltage (cyclic operation)14.5V - 14.9V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 1600 cycles at 30% depth of discharge Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.6 ConnectionFaston 6.3 mm CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12120D lead-acid batteryFor which applications is the CP12120D suitable?The battery is ideal for a variety of cyclic applications:Electric wheelchairs, scooters and other rehab technologyToys and children's electric vehiclesMobile lighting and sound systemsEcho sounders and power supply for fishing boatsCamping and leisure activities Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaks in any position.What is the service life of the CP12120D?Service life in cyclic operation is very high and depends on the depth of discharge. With regular discharging to 30%, for example, the battery can achieve up to 1600 cycles.Can the battery be flexibly installed?Yes, the battery can be operated in all positions, with the exception of permanent overhead installation. This enables flexible installation in various devices.What are the charging parameters for this battery?Cyclic charging voltage (20°C): about 14.5 V to 14.9 V.Float charge voltage (20°C): about 13.6 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 3.6 A. Exceeding this may reduce the service life.Can I use this battery as a replacement for a standard lead-acid battery?Yes, in many cases this AGM battery can replace a conventional lead-acid or gel battery with the same specifications (voltage, capacity and dimensions) and often offers advantages such as higher cycle stability and absolute maintenance freedom.