UPS

The VISION RBC140 is a high-quality and ready-to-install Replacement battery cartridgewhich can be used as a direct and reliable replacement for the original APC RBC140 Cartridge was designed. Equipped with high-performance, valve-controlled VRLA batteriesoffers this Cartridge A cost-effective and safe solution for restoring the full performance of your APC Smart UPS Online system. Equipped with maintenance-free AGM technologyThis product guarantees a fail-safe power supply for your business-critical applications.Highlights at a glance100% compatible: Developed as a perfect fit Replacement for APC RBC140ensures quick and easy replacement of the Hot Swap Installation.Plug and play installation: The Cartridge is supplied fully assembled and wired for replacement in just a few minutes without interrupting operation.High reliability: Uses only high quality AGM batteriesdesigned for the demanding UPS operation are optimised.Maintenance free: The leak-proof AGM technology eliminates the need for battery maintenance over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe Vision RBC140 Cartridge is designed to meet the demanding requirements of APC Smart UPS Online systems of the 5kVA to 10kVA class. The installed Batteries are High current capability and can immediately provide the power you need to safely shut down or continue operating your connected servers, network storage and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe cartridge included in the RBC140 Cartridge used Batteries are based on the proven VRLA technology (Valve Regulated Lead Acid) with a AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the Batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust housing of the Batteries made of ABS plastic offers excellent protection against mechanical impact.Battery features ModelVision RBC140 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, plug & play Nominal voltage (V)192 (system voltage) Capacity (Ah)5 (Typical value) Charging voltage (trickle charge)216.0V - 220.8V (system) Charging voltage (cycle operation)230.4V - 240.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 23.0 ConnectionMatching APC system plug Compatibility (extract)APC SRT5KXLI, SRT6KXLI, SRT8KXLI, SRT10KXLI  FAQs on the VISION RBC140 replacement battery cartridgeFor which UPS models is this cartridge suitable?The Vision RBC140 Cartridge is available as Replacement for the original APC RBC140 battery unit and is compatible with the following APC Smart UPS Online models compatible: SRT5KXLI, SRT5KRMXLI, SRT6KXLI, SRT6KRMXLI, SRT8KXLI, SRT8KRMXLI, SRT10KXLI, SRT10KRMXLI. Before purchasing, please check the exact designation of your UPS system.Is replacing the battery complicated?No, replacement is very simple and can be carried out during operation (Hot Swap) can be carried out without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is remove the old Cartridge Pull out, disconnect the plug, insert the new Vision RBC140 Cartridge plug in and insert again.Do I need to make any adjustments to the UPS after replacing it?After inserting the new Cartridge recognises the UPS usually replaces the battery automatically. It is recommended to use the software or the display to set the replacement date of the Battery and perform a self-test function. A runtime calibration can be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC140 Cartridge is professionally assembled, tested and uses only quality-tested components Batterieswhich are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC140 replacement cartridge?The service life of the installed Batteries in typical standby operation in one UPS system at 20 °C up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old Cartridge at municipal collection points, recycling centres or at any dealer who sells starter batteries, free of charge and in an environmentally friendly manner.

The VISION RBC157 is a high-quality, ready-to-install replacement battery cassette, designed as a direct and reliable replacement for the original APC RBC157 cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement cassette for APC RBC157, ensures simple and quick hot swap installation.Plug and Play installation: The cartridge is delivered fully assembled and wired for a replacement in just a few minutes without interrupting operation.High reliability: Uses only high-quality AGM batteries, which are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary throughout its service life.Long-lasting: Designed for long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC157 cartridge is designed to meet the demanding requirements of APC Smart UPS systems such as SMT1000RMI2UC. The installed batteries are high-current capable and can provide the required power immediately in the event of a power failure, to safely shut down or continue operating your connected servers, network storage and other critical equipment. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC157 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust batteries housing made of ABS plastic offers excellent protection against mechanical impacts.Characteristics  ModelVISION RBC157 replacement battery cassette Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette, Plug & Play Rated voltage (V)48 (system voltage) Capacity (Ah)5 (typical value) Charging voltage (trickle charge)54.0V - 55.2V (system) Charging voltage (cycle operation)57.6V - 60.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.0 ConnectionCompatible APC system connector Compatibility (extract)APC SMT1000RMI2UC  FAQs about the VISION RBC157 replacement battery cassetteFor which UPS models is this cartridge suitable?The VISION RBC157 cartridge is designed as a replacement for the original APC RBC157 battery unit and is compatible, among others, with the APC Smart UPS model SMT1000RMI2UC. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, the replacement is very simple and can be carried out during ongoing operation (Hot Swap) without any technical knowledge. The APC UPS systems have an easily accessible battery compartment. You simply have to pull out the old cassette, unplug it, plug in the new VISION RBC157 cartridge and reinsert it.Do I need to adjust anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via software (PowerChute) or on the display and to run a self-test function. A runtime calibration can be useful to ensure the exact remaining runtime indication.Is it safe to use a replacement cassette from third-party suppliers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC157 cartridge is professionally assembled, tested and uses only quality-tested batteries that are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC157 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I have to note when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cassette free of charge and in an environmentally friendly manner at municipal collection points, recycling depots or any retailer who sells starter batteries. 

The VISION RBC12 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC12 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC12, ensuring easy and quick installation.High reliability: Uses high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary.Durable: Designed for long service life in standby mode to protect your systems for years.Easy replacement: The kit is supplied as a complete set of two batteries, so you can replace them quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC12 Kit is designed to meet the demanding requirements of various APC UPS systems. The installed batteries are high-current capable and can immediately deliver the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC12 Kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection from mechanical impacts.Features  ModelVISION RBC12 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC DL700, SU700, SU700NET  FAQs about the VISION RBC12 replacement batteryFor which UPS models is this kit suitable?The VISION RBC12 Kit is designed as a replacement for the original APC RBC12 battery unit and is compatible, among others, with the following APC models: DL700, SU700, SU700NET, SU700RM, SU700RMINET. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is usually very simple and can be done without technical expertise. Most APC UPS systems feature an easily accessible battery compartment. You simply need to disconnect and remove the old battery unit, then connect and insert the new VISION RBC12 kit. Make sure to wire the two batteries correctly.Do I need to adjust anything on the UPS after replacing?After inserting the new battery, you should turn on the UPS and perform a self-test function if your model offers it. It is also recommended to fully charge the battery in the UPS before first use. Special calibration is usually not necessary for these models.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC12 kit uses only quality-tested batteries, which are designed for use in UPS systems and provide maximum safety.What is the service life of the VISION RBC12 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. Actual lifetime can be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of an old battery kit?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery kit free of charge and in an environmentally friendly way at municipal collection points, recycling centres or at any dealer who sells starter batteries. 

The VISION RBC152 is a high-quality and ready-to-install Replacement battery cartridgewhich can be used as a direct and reliable replacement for the original APC RBC152 Cartridge was designed. Equipped with a high-performance, valve-controlled VRLA batteryoffers this Cartridge a cost-effective and safe solution for restoring the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technologyThis product guarantees a fail-safe power supply for your connected devices.Highlights at a glance100% compatible: Developed as a perfect fit Replacement for APC RBC152ensures quick and easy installation.Plug and play installation: The Cartridge is supplied fully assembled and wired for quick and easy replacement.High reliability: Uses a high quality AGM batterydesigned for the demanding UPS operation is optimised.Maintenance-free: The leak-proof AGM technology makes any maintenance of the Battery over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe Vision RBC152 Cartridge is designed to meet the demanding requirements of APC Back UPS systems to fulfil. The installed Battery is High current capability and can immediately provide the power you need to safely shut down or continue operating your connected computers, networks and other critical devices in the event of a power outage. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe cartridge included in the RBC152 Cartridge used Battery based on the proven VRLA technology (Valve Regulated Lead Acid) with a AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the Battery absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust housing of the Battery made of ABS plastic offers excellent protection against mechanical impact.Features  ModelVision RBC152 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, plug & play Rated voltage (V)12 (system voltage) Capacity (Ah)9 (Typical value) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 2.6 ConnectionMatching APC system plug Compatibility (extract)APC BVS1000I, BVX1200LI-GR  FAQs on the VISION RBC152 replacement battery cartridgeFor which UPS models is this cartridge suitable?The Vision RBC152 Cartridge is available as Replacement for the original APC RBC152 battery unit and is compatible with the following APC Back UPS models compatible: BVS1000I and BVX1200LI-GR. Please check the exact designation of your system before purchasing UPS system.Is replacing the battery complicated?No, the replacement is usually very simple and can be carried out without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you need to do is remove the old Cartridge Pull out, disconnect the plug, insert the new Vision RBC152 Cartridge plug in and insert again.Do I need to make any adjustments to the UPS after replacing it?After inserting the new Cartridge recognises the UPS the replacement usually automatically. It is recommended that the UPS leave it connected to the mains for a few hours without interruption after replacement so that the new Battery is fully charged. A subsequent self-test, if supported by the device, is also advisable.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC152 Cartridge is professionally assembled, tested and uses only quality-tested components Batteriesdesigned for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC152 replacement cartridge?The service life of the installed Battery in typical standby operation in one UPS system at 20 °C up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old Cartridge at municipal collection centres, recycling centres or at any dealer who sells starter batteries, free of charge and in an environmentally friendly manner. 

The VISION RBC115 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC115 cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement cartridge for APC RBC115, ensures quick and easy hot swap installation.Plug and play installation: The cartridge is supplied fully assembled and wired for replacement in just a few minutes.High reliability: Uses only high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC115 cartridge is designed to meet the demanding requirements of APC Smart UPS systems to fulfil. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, networks and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC115 Cartridge are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impacts.Features  ModelVISION RBC115 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, plug & play Rated voltage (V)24 (system voltage) Capacity (Ah)7 (Typical value) Charging voltage (trickle charge)27.0V - 27.6V (System) Charging voltage (cycle operation)28.8V - 30.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 5.5 ConnectionMatching APC system plug Compatibility (extract)APC SMT750RMI2U, SMX750I  FAQs for the VISION RBC115 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC115 cartridge is designed as a replacement for the original APC RBC115 battery unit and is compatible with the following APC Smart UPS models, among others: SMT750RMI2U and SMX750I. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, the replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is pull out the old cartridge, disconnect the plug, plug in the new VISION RBC115 cartridge and push it back in.Do I need to make any adjustments to the UPS after replacing it?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display and to perform a self-test function. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC115 cartridge is expertly assembled, tested and uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC115 replacement cartridge?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cartridge free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any retailer that sells starter batteries. 

The VISION RBC4 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC4 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Back UPS Pro or Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC4, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries so that you can quickly and easily replace them yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC4 kit is designed to fulfil the demanding requirements of various APC UPS systems. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, computers and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC4 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impact.Features  ModelVISION RBC4 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery and system) Capacity (Ah)12 (per battery) / 24 (system) Charging voltage (float charge)13.5V - 13.8V (system) Charging voltage (cycle operation)14.4V - 15.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 7.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC BP650S, BK650MC, SUVS650  FAQs about the VISION RBC4 replacement batteryFor which UPS models is this kit suitable?The VISION RBC4 kit is designed as a replacement for the original APC RBC4 battery unit and is compatible with the following APC models, among others: BP650S, BP650SC, BK650MC and SUVS650. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, the replacement is usually very simple and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. All you have to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC4 kit. Ensure that the two batteries are wired correctly.Do I have to adjust anything on the UPS after replacing the battery?After inserting the new battery, you should switch on the UPS and perform a self-test function if your model offers this. It is also recommended that you fully charge the battery in the UPS before using it for the first time. A special calibration is usually not necessary for these models.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC4 kit uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC4 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer who sells starter batteries. 

The VISION RBC48 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC48 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a precisely fitting replacement for APC RBC48, it ensures easy and quick installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance superfluous.Long-lasting: Designed for a long service life in standby operation, to protect your systems for years.Easy replacement: The kit is supplied as a complete set of two batteries so you can perform the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC48 kit is designed to meet the demanding requirements of various APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC48 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical influences.Features  ModelVISION RBC48 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cyclic operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC DLA1500I, SMT1500I, SUA1500I  FAQs about the VISION RBC48 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC48 kit is designed as a replacement for the original APC RBC48 battery unit and is compatible, among others, with the following APC Smart UPS models: DLA1500I, SMT1500I, SMT1500IC and SUA1500I. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacing the battery is generally very easy and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. You only need to disconnect and remove the old battery unit and connect and insert the new VISION RBC48 kit. Please ensure the correct wiring of the two batteries.Do I have to adjust anything on the UPS after replacement?After installing the new battery, the UPS should be switched on and a self-test function performed. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure accurate remaining runtime indication.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC48 kit uses exclusively quality-tested batteries that are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC48 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly way at municipal collection points, recycling centres or at any retailer who sells starter batteries. 

The VISION RBC11 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC11 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and secure solution to restore the full performance capability of your APC Smart UPS or Back UPS Pro unit. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a precisely fitting replacement for APC RBC11, ensures an easy and rapid installation.High reliability: Uses high-quality AGM batteries, which are optimised for demanding UPS operation with high discharge currents.Maintenance-free: The leak-proof AGM technology makes all battery maintenance unnecessary.Long-lasting: Designed for extended service life in standby mode to protect your systems for years.Easy replacement: The kit is delivered as a complete set of four batteries so that you can carry out the replacement quickly and easily yourself.Economic solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC11 kit is designed to meet the demanding requirements of APC Smart UPS and Back UPS Pro units. The installed batteries are high-current capable and can immediately supply the required power in the event of a power failure, allowing you to safely shut down or continue to operate your connected servers, networks and other critical equipment. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC11 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is securely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and allows operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic case of the batteries provides excellent protection against mechanical impact.Features  ModelVISION RBC11 Replacement Battery Battery typeVRLA AGM (UPS Replacement Battery Kit) Contents4 x 12V AGM Batteries Nominal Voltage (V)12 (per battery) Capacity (Ah)17 (Typical value, per battery) Charging Voltage (Float Charge)13.5V - 13.8V Charging Voltage (Cyclic Use)14.4V - 15.0V Operating Temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage Temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 24.0 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC SU1000, SU1500, SU700XL  FAQs about the VISION RBC11 Replacement BatteryFor which UPS models is this kit suitable?The VISION RBC11 kit is designed as a replacement for the original APC RBC11 battery unit and is compatible, among others, with the following APC models: SU1000, SU1000NET, SU1000RM, SU1000RMINET, SU1500, SU1500RM, SU700XL, SU700XLNET, BP1000. Please check the exact designation of your UPS unit before purchase.Is replacing the battery complicated?No, replacement is generally very straightforward and can be carried out without technical expertise. Most APC UPS units have a readily accessible battery compartment. You just need to disconnect and remove the old battery unit, and install and connect the new VISION RBC11 kit. Please ensure correct cabling of the four batteries.Do I need to adjust the UPS after replacement?After replacement, it is recommended to perform a runtime calibration using the APC PowerChute software or the UPS display. This ensures that the UPS correctly recognises the new battery capacity and shows the remaining runtime accurately. Please fully charge the batteries before calibration.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC11 kit uses only quality-tested batteries that are designed for use in UPS units and ensure maximum safety.What is the service life of the VISION RBC11 Replacement Battery?The service life of the installed batteries in typical standby operation in a UPS unit at 20 °C is up to 5 years. The actual lifespan may be affected by factors such as ambient temperature and the frequency of power failures.What should I consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer who sells starter batteries.

The VISION RBC5 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC5 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC5, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries so that you can quickly and easily replace them yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC5 kit is designed to fulfil the demanding requirements of various APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the power required to either safely shut down or continue operating your servers, computers and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC5 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic housing of the batteries provides excellent protection against mechanical impact.Features ModelVISION RBC5 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cyclic operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU450INET, SU700I, SU700INET  FAQs on the VISION RBC5 replacement batteryFor which UPS models is this kit suitable?The VISION RBC5 kit is designed as a replacement for the original APC RBC5 battery unit and is compatible, among others, with the following APC Smart UPS models: SU450INET, SU700I and SU700INET. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is usually very simple and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. You only need to disconnect and remove the old battery unit, and then connect and insert the new VISION RBC5 kit. Please ensure you correctly wire the two batteries.Do I have to adjust anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and perform a self-test function. It is recommended to record the battery replacement date via the software (PowerChute) or the display. A runtime calibration may be useful to ensure accurate remaining runtime display.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC5 kit uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC5 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual lifespan may be affected by factors such as ambient temperature and frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or at any retailer selling starter batteries.

The VISION RBC7 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC7 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC7, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation with high discharge currents.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries so that you can quickly and easily replace them yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC7 kit is designed to meet the demanding requirements of APC Smart UPS systems in the 1500VA class. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, network storage and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC7 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impact.Features  ModelVISION RBC7 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)17 (Typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 11.0 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU1500I, SUA1500I, SMT1500I  FAQs about the VISION RBC7 replacement batteryFor which UPS models is this kit suitable?The VISION RBC7 kit is designed as a replacement for the original APC RBC7 battery unit and is compatible with the following APC Smart UPS models, among others: SU1500I, SUA1500I and SMT1500I. Please check the exact designation of your UPS system before purchasing.Is it complicated to replace the battery?No, the replacement is usually very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC7 kit. Ensure that the two batteries are wired correctly.Do I have to adjust anything on the UPS after replacing the battery?After inserting the new battery, you should switch on the UPS and perform a self-test function. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. Vision is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC7 kit uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC7 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any retailer that sells starter batteries. 

The VISION RBC2 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC2 battery unit. Consisting of a high-performance, valve-regulated VRLA battery, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your connected devices.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC2, ensures quick and easy installation.High Reliability: Uses a high-quality AGM battery that is optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple Replacement: The kit is supplied ready for installation so that you can carry out the replacement yourself quickly and easily.Economical Solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC2 kit is designed to fulfil the demanding requirements of various APC Back UPS systems. The built-in battery is capable of delivering high current and can immediately provide the required power in the event of a power failure to either safely shut down or continue running your connected computers, networks, and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe battery used in the RBC2 kit is based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the battery completely leak-proof and allows operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic battery housing offers excellent protection against mechanical influences.Features  ModelVISION RBC2 replacement battery Battery typeVRLA AGM (UPS replacement battery) Contents1 x 12V AGM battery Rated voltage (V)12 Capacity (Ah)7 - 9 (depending on model) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 2.6 ConnectionSuitable for APC UPS models Compatibility (extract)APC BE550G, BK350, BK500, BP280  FAQs about the VISION RBC2 replacement batteryFor which UPS models is this kit suitable?The VISION RBC2 kit is designed to replace the original APC RBC2 battery unit and is compatible with a wide range of APC Back UPS models, including BE550G, BK350, BK500, BK650EI, BP280BPNP and many others. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is usually very simple and can be done without technical expertise. Most APC Back UPS systems have an easily accessible battery compartment. You only need to disconnect the old battery, remove it, and connect and install the new VISION RBC2 battery.Do I need to set anything on the UPS after the replacement?After inserting the new battery, you should turn on the UPS and run a self-test function if your model provides it. It is also advisable to fully charge the battery in the UPS for at least 8 hours before first use. No special calibration is necessary for these models.Is it safe to use a third-party replacement battery?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC2 kit uses only quality-tested batteries designed for use in UPS systems and ensures the highest level of safety.What is the service life of the VISION RBC2 replacement battery?The service life of the installed battery is up to 5 years in typical standby operation in a UPS system at 20°C. Actual service life may be affected by factors such as ambient temperature and the frequency of power outages.What should I bear in mind when disposing of the old battery?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer selling starter batteries.

The VISION RBC18 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC18 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a precisely fitting replacement for APC RBC18, ensures simple and quick installation.High reliability: Uses high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary.Durable: Designed for a long service life in standby operation, to protect your systems for years.Simple replacement: The kit is delivered as a complete set of four batteries, so you can carry out the replacement quickly and easily yourself.Economic solution: Offers the same performance and safety as the original at an attractive price.Strong performance for safety-critical applicationsThe VISION RBC18 kit is designed to meet the demanding requirements of various APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power outage, to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage due to power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC18 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely contained in a fibreglass mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic case of the batteries provides excellent protection against mechanical impacts.Features  ModelVISION RBC18 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents4 x 6V AGM batteries Nominal voltage (V)6 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cycle use)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.8 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU700RM2U, SU700RMNET  FAQs about the VISION RBC18 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC18 kit is designed as a replacement for the original APC RBC18 battery unit and is compatible, among others, with the following APC Smart UPS models: SU700RM2U and SU700RMNET. Please check the precise designation of your UPS system before purchase.Is battery replacement complicated?No, replacement is usually very easy and can be done without technical expertise. Most APC UPS systems have an easily accessible battery compartment. You just need to disconnect the old battery unit, remove it and connect and install the new VISION RBC18 kit. Make sure to wire the four batteries correctly.Do I need to adjust anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and carry out a self-test function if your model offers this. It is also recommended to fully charge the battery in the UPS before using it for the first time. Special calibration is usually not required for these models.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries, which often meet or exceed the specifications of original batteries. Our RBC18 kit only uses quality-tested batteries designed for UPS operation and provides the highest safety.What is the service life of the VISION RBC18 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power outages.What do I need to consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and may not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres or any retailer selling starter batteries. 

The VISION RBC8 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC8 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC8, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Durable: Designed for long service life in standby operation to protect your systems for years.Easy replacement: The kit is supplied as a complete set of two batteries so you can replace them yourself quickly and easily.Economic solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC8 kit is designed to meet the demanding requirements of various APC Smart UPS systems. The installed batteries are capable of supplying high current and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers, and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC8 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long shelf life and readiness for use. The sturdy ABS plastic casing of the batteries provides excellent protection against mechanical impact.Features  ModelVISION RBC8 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC DLA1500I, SMT1500I, SUA1500I  FAQs on the VISION RBC8 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC8 kit is designed as a replacement for the original APC RBC8 battery unit and is compatible with the following APC Smart UPS models: DLA1500I, SMT1500I and SUA1500I. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is generally very easy and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. You simply need to disconnect and remove the old battery unit and insert and connect the new VISION RBC8 kit. Please ensure the correct wiring of the two batteries.Do I need to make any settings on the UPS after replacement?After installing the new battery, you should switch on the UPS and run a self-test function. It is recommended to record the replacement date of the battery via the software (PowerChute) or the display. Runtime calibration may be useful to ensure accurate remaining runtime indication.Is the use of a third-party replacement battery safe?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or even exceed the specifications of the original batteries. Our RBC8 kit uses only quality-tested batteries designed for use in UPS systems and ensures maximum safety.What is the service life of the VISION RBC8 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20°C is up to 5 years. The actual service life may be affected by factors such as ambient temperature and frequency of power failures.What do I need to consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery set free of charge and in an environmentally friendly manner at municipal collection points, recycling centres, or any retailer selling starter batteries.

The VISION RBC9 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC9 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and secure solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC9, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary.Durable: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of four batteries, so you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC9 kit is designed to meet the demanding requirements of various APC Smart UPS systems. The built-in batteries are capable of high current and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC9 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries provides excellent protection against mechanical influences.Features  ModelVISION RBC9 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents4 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (per battery) / 14 (system) Charging voltage (float charging)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 8.4 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC SU700RM, SU700RMNET  FAQs about the VISION RBC9 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC9 kit is designed as a replacement for the original APC RBC9 battery unit and is, among other things, compatible with the following APC Smart UPS models: SU700RM and SU700RMNET. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, the replacement is generally very easy and can be performed without technical expertise. Most APC UPS units have an easily accessible battery compartment. You simply need to disconnect and remove the old battery unit and connect and insert the new VISION RBC9 kit. Be sure to connect the four batteries correctly.Do I need to set anything on the UPS after replacing the battery?After inserting the new battery, you should switch on the UPS and perform a self-test function. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure the accurate display of the remaining runtime.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or even exceed the specifications of the original batteries. Our RBC9 kit uses only quality-checked batteries that are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC9 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any retailer that sells starter batteries. 

The VISION RBC6 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC6 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC6, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Long-lasting: Designed for long service life in standby operation, to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries, so you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC6 kit is designed to fulfil the demanding requirements of various APC Smart UPS systems. The built-in batteries are high-current capable and, in the event of a power failure, can immediately provide the required output to safely shut down or keep your connected servers, computers and other critical devices running. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC6 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a fibreglass mat. This makes the batteries absolutely leak-proof and allows operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries provides excellent protection against mechanical effects.Features  ModelVISION RBC6 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)12 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cyclic operation)28.8V - 30.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 7.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU1000I, SU1000INET  FAQs about the VISION RBC6 replacement batteryFor which UPS models is this kit suitable?The VISION RBC6 kit is designed as a replacement for the original APC RBC6 battery unit and is, among others, compatible with the following APC Smart UPS models: SU1000I and SU1000INET. Please check the exact designation of your UPS system before purchase.Is it complicated to replace the battery?No, replacement is generally very simple and can be performed without technical expertise. Most APC UPS systems have an easily accessible battery compartment. All you need to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC6 kit. Make sure to wire the two batteries correctly.Do I need to set anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and run a self-test function. It's recommended to note the replacement date of the battery via the software (PowerChute) or on the display. A runtime calibration can be helpful to ensure the exact remaining runtime display.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or even exceed the specifications of the original batteries. Our RBC6 kit uses only quality-tested batteries designed for use in UPS systems and guarantee the highest safety.What is the service life of the VISION RBC6 replacement battery?The service life of the built-in batteries in typical standby operation in a UPS system at 20°C is up to 5 years. The actual service life may be affected by factors such as ambient temperature and frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery pack free of charge and in an environmentally responsible manner at municipal collection points, recycling centres, or at any retailer selling starter batteries. 

The VISION RBC23 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC23 cartridge. Equipped with four high-performance, valve-regulated VRLA batteries, this cartridge provides a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as an exact-fit replacement cassette for APC RBC23, ensures quick and easy hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired for replacement in minutes without interruption of operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary throughout the whole service life.Durable: Designed for a long service life in standby operation, to reliably protect your systems for years.Economic Solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC23 cartridge is designed to meet the demanding requirements of APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue to operate your connected servers, network storage and other critical devices. The stable and reliable performance protects your valuable hardware from damage due to power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC23 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is securely bound in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic housing of the batteries provides excellent protection against mechanical impact.Features  ModelVISION RBC23 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Nominal voltage (V)48 (system voltage) Capacity (Ah)7 (typical value, per battery) Charging voltage (trickle charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 8.5 (total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SUA2200RMI2U, SUA3000RMI2U  FAQs about the VISION RBC23 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC23 cartridge is designed as a replacement for the original APC RBC23 battery unit and is compatible, among others, with the following APC Smart UPS models: SUA2200RMI2U and SUA3000RMI2U. Please check the exact designation of your UPS system before purchasing.Is battery replacement complicated?No, replacement is very easy and can be carried out during operation (hot swap) without technical expertise. APC UPS units have an easily accessible battery compartment. Simply pull out the old cassette, disconnect the plug, plug in the new VISION RBC23 cartridge and push it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software (PowerChute) or display and to carry out a self-test function. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cassette from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC23 cartridge is expertly assembled, tested and uses only quality-checked batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC23 replacement cassette?The service life of the batteries used in typical standby operation in a UPS at 20 °C is up to 5 years. The actual service life can be affected by factors such as ambient temperature and frequency of power failures.What must I consider when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer selling starter batteries. 

The VISION RBC44 is a high-quality, ready-to-install replacement battery cassette designed as a direct and reliable replacement for the original APC RBC44 cartridge. Fitted with four high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore full performance of your APC Smart UPS XL system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power for your business-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement cassette for APC RBC44, ensures easy and quick hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired for replacement in just a few minutes with no interruption in operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary throughout their service life.Durable: Designed for prolonged service life in standby operation to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC44 cartridge is designed to meet the demanding requirements of APC Smart UPS XL systems. The installed batteries are high-current capable and can instantly provide the required performance in the event of a power failure to safely shut down or continue running your connected servers, network storage and other critical devices. Its stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC44 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), which safely binds the electrolyte in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long storage and readiness. The tough ABS plastic case of the batteries provides excellent protection against mechanical impacts.Features  ModelVISION RBC44 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Rated voltage (V)48 (System Voltage) Capacity (Ah)17 (Typical value, per battery) Charging voltage (trickle charge)54.0V - 55.2V (System) Charging voltage (cycle operation)57.6V - 60.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 24.0 (Total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SU2200RMXL3U, SU3000RMXL3U  FAQs about the VISION RBC44 replacement battery cartridgeWhich UPS models is this cartridge suitable for?The VISION RBC44 cartridge is designed as a replacement for the original APC RBC44 battery unit and is, among others, compatible with the following APC Smart UPS XL models: SU2200RMXL3U, SU2200RMXLI3U and SU3000RMXL3U. Please check the exact model designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is very simple and can be performed during operation (hot swap) with no technical expertise. The APC UPS systems have an easily accessed battery compartment. You only have to pull out the old cassette, disconnect the plug, connect the new VISION RBC44 cartridge and slide it back in.Do I have to set anything on the UPS after replacement?After inserting the new cartridge, the UPS generally recognises the replacement automatically. It is recommended to note the battery replacement date using the software (PowerChute) or the display and to carry out a self-test function. A runtime calibration can be useful to ensure the correct remaining runtime display.Is it safe to use a third-party replacement cassette?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC44 cassette is expertly assembled, tested and uses only quality-approved batteries designed for use in UPS systems and ensures maximum safety.What is the service life of the VISION RBC44 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby mode in a UPS system at 20 °C. Actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I have to consider when disposing of the old cassette?Lead batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally friendly way at municipal collection points, recycling centres or any retailer selling starter batteries. 

The VISION RBC3 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC3 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and secure solution for restoring the full functionality of your APC Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your connected devices.Highlights at a glance100% Compatible: Developed as an exact-fit replacement for APC RBC3, ensures easy and quick installation.High reliability: Uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance superfluous.Durable: Designed for a long service life in standby mode, to protect your systems for years to come.Easy replacement: The kit is supplied as a complete set of two batteries, so you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC3 kit is designed to meet the demanding requirements of various APC Back UPS systems. The installed batteries are high-current capable and can, in case of power failure, immediately provide the necessary performance to safely power down or continue operating your connected computers, networks, and other critical equipment. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC3 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat) in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and allows them to be operated in any position. The low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic housing offers excellent protection against mechanical influences.Features ModelVISION RBC3 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 6V AGM batteries Nominal voltage (V)6 (per battery) / 12 (system) Capacity (Ah)12 (Typical value, per battery) Charging voltage (float charge)13.5V - 13.8V (system) Charging voltage (cycle operation)14.4V - 15.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 3.8 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC BK600, BK650EI, BE700G-GR  FAQs about the VISION RBC3 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC3 kit is designed as a replacement for the original APC RBC3 battery unit and is compatible with, among others, the following APC Back UPS models: BK600, BK650EI, and BE700G-GR. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is generally very easy and can be carried out without technical expertise. Most APC Back UPS systems have an easily accessible battery compartment. You simply need to disconnect and remove the old battery unit, and connect and insert the new VISION RBC3 kit. Ensure the correct wiring of the two batteries.Do I need to set anything on the UPS after replacement?After inserting the new battery, you should turn on the UPS and run a self-test function if your model offers this. It is also recommended to fully charge the battery in the UPS for at least 8 hours before initial use. Special calibration is not required for these models.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed original battery specifications. Our RBC3 kit uses only quality-approved batteries, designed for use in UPS systems and ensuring the highest safety.What is the service life of the VISION RBC3 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20°C. The actual service life may be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or at any retailer selling starter batteries. 

The VISION RBC1 is a high-quality replacement battery kit that has been designed as a direct and reliable replacement for the original APC RBC1 battery unit. Consisting of a high-performance 12V valve-regulated VRLA battery, this kit provides a cost-effective and safe solution to restore the full performance of your APC UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Designed as a precisely fitting replacement for APC RBC1 to ensure quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Long service life: Designed for long operational periods in standby mode to protect your systems for years.Easy replacement: The kit is supplied ready to install, so you can carry out the replacement yourself quickly and easily.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC1 kit is designed to meet the demanding requirements of APC Back-UPS UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. Stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC1 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is safely contained in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust battery housing made of ABS plastic provides excellent protection against mechanical effects.Features  ModelVISION RBC1 replacement battery Battery typeVRLA AGM (UPS replacement battery) Nominal voltage (V)12 Capacity (Ah)4.5 (typical value) Maximum discharge current65A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 1.8 ConnectionFits APC UPS models Compatibility (excerpt)APC BK250, BK280, BK400, BK500  FAQs about the VISION RBC1 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC1 kit is designed as a replacement for the original APC RBC1 battery unit and is compatible, among others, with the following APC Back-UPS models: BK250EC, BK280B, BK400, BK400B, BK500, BK500M and BK500MC. Please check the exact label of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is generally very simple and can be carried out without technical knowledge. Most APC UPS systems have an easily accessible battery compartment. You just need to disconnect and remove the old battery unit and connect and insert the new VISION RBC1 kit.Do I need to set anything on the UPS after replacement?After installing the new battery, you should switch on the UPS and perform a self-test function, if your model offers this. It is also recommended to fully charge the battery in the UPS before first use. A special calibration is usually not necessary for these models.Is it safe to use a third-party replacement battery?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC1 kit uses only quality-tested batteries designed for UPS operation and guarantees the highest level of safety.What service life does the VISION RBC1 replacement battery have?The life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be affected by factors such as ambient temperature and frequency of power failures.What do I need to consider when disposing of the old battery?Lead-acid batteries are hazardous waste and must not be disposed of in your household waste. You can dispose of your old battery free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or at any retailer that sells starter batteries.

The VISION RBC47 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC47 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit provides a cost-effective and safe solution to restore full performance to your APC Smart UPS or Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC47, ensures easy and fast installation.High Reliability: Uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance Free: The leak-proof AGM technology makes any maintenance of the batteries superfluous.Long Service Life: Designed for long use in standby mode to protect your systems for years.Easy Replacement: The kit is delivered as a complete set of two batteries, so you can replace it quickly and easily by yourself.Economical Solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC47 kit is designed to meet the demanding requirements of various APC UPS systems. The installed batteries are high-current capable and can provide the necessary power immediately in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC47 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust housing of the batteries, made of ABS plastic, provides excellent protection against mechanical influences.Characteristics  ModelVISION RBC47 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (Typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC DLA750I, SMT750I, SMT750RMI2U  FAQs about the VISION RBC47 replacement batteryFor which UPS models is this kit suitable?The VISION RBC47 kit is designed as a replacement for the original APC RBC47 battery unit and is among others compatible with the following APC Smart UPS models: DLA750I, SMT750I, SMT750IC, SMT750RMI2U. Please check the exact designation of your UPS unit before purchase.Is it complicated to replace the battery?No, replacement is generally very simple and can be performed without technical expertise. Most APC UPS units have an easily accessible battery compartment. You only have to disconnect the old battery unit, remove it and connect and insert the new VISION RBC47 kit. Pay attention to the correct wiring of both batteries.Do I have to adjust anything on the UPS after replacement?After fitting the new battery, you should switch on the UPS and perform a self-test function. It is recommended to record the replacement date of the battery via the software (PowerChute) or the display. Runtime calibration may be useful to ensure the precise remaining runtime display.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC47 kit uses only quality-tested batteries that are designed for use in UPS units and provide maximum safety.What is the service life of the VISION RBC47 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What should I consider when disposing of the old battery set?Lead-acid batteries are special waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or with any retailer who sells starter batteries.

The VISION RBC55 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC55 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC55, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Durable: Designed for long service life in standby operation, to protect your systems over many years.Simple replacement: The kit is supplied as a complete set of four batteries, so you can quickly and easily perform the replacement yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC55 kit is designed to meet the demanding requirements of APC Smart UPS systems of the 2200VA and 3000VA class. The built-in batteries are high-current capable and can immediately provide the required power in the event of a power failure, so that your connected servers, network storage and other critical devices can be safely shut down or continue to operate. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC55 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is safely bound in a fibreglass mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust housing of the batteries made of ABS plastic provides excellent protection against mechanical impact.Features  ModelVISION RBC55 Replacement Battery Battery typeVRLA AGM (UPS replacement battery kit) Contents4 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 48 (system) Capacity (Ah)17 (system capacity) Charging voltage (maintenance charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 24.0 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC SUA2200I, SUA3000I, SUA3000RMI2U  FAQs about the VISION RBC55 Replacement BatteryWhich UPS models is this kit suitable for?The VISION RBC55 kit is designed as a replacement for the original APC RBC55 battery unit and is compatible, among others, with the following APC Smart UPS models: SUA2200I, SUA2200RMI2U, SUA3000I and SUA3000RMI2U. Please check the exact designation of your UPS system before purchasing.Is battery replacement complicated?No, replacement is usually very simple and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. All you need to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC55 kit. Make sure that the wiring of the four batteries is correct.Do I have to set anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and run a self-test function. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure the exact remaining runtime indicator.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries, which often meet or even exceed the specifications of the original batteries. Our RBC55 kit uses only quality-tested batteries, designed for use in UPS systems and ensuring the highest level of safety.What is the service life of the VISION RBC55 Replacement Battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20°C. The actual service life may be influenced by factors such as ambient temperature and frequency of power failures.What should I pay attention to when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or any retailer that sells starter batteries.

The VISION RBC17 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC17 battery unit. Consisting of a high-performance, valve-regulated VRLA battery, this kit offers a cost-effective and safe solution to restore the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your connected devices.Highlights at a glance100% Compatible: Developed as an exact replacement for APC RBC17, ensures easy and quick installation.High reliability: Uses a high-quality AGM battery optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the battery unnecessary.Durable: Designed for a long service life in standby operation, to protect your systems for years.Easy replacement: The kit comes ready to install so that you can make the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC17 kit is designed to meet the demanding requirements of various APC Back UPS systems. The battery used is high-current capable and can immediately deliver the power required in the event of a power failure to safely shut down or continue operating your connected computers, networks and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe battery used in the RBC17 kit is based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the battery absolutely leak-proof and allows operation in any position. The low self-discharge rate ensures long shelf life and readiness for use. The robust ABS plastic housing of the battery offers excellent protection from mechanical impacts.Features  ModelVISION RBC17 replacement battery Battery typeVRLA AGM (UPS replacement battery) Contents1 x 12V AGM battery Nominal voltage (V)12 Capacity (Ah)7 - 9 (depending on model) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 2.6 ConnectionSuitable for APC UPS models Compatibility (selection)APC BE600M1, BE750G, BN700MC, BN900M  FAQs about the VISION RBC17 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC17 kit is designed as a replacement for the original APC RBC17 battery unit and is compatible with, among others, the following APC Back UPS models: BE600M1, BE650G1, BE700, BE750G, BN600, BN650M1, BN700MC and BN900M. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is generally very simple and can be carried out without technical expertise. Most APC Back UPS systems have an easily accessible battery compartment. You simply need to disconnect and remove the old battery, and connect and insert the new VISION RBC17 battery.Do I have to make any settings on the UPS after replacement?After inserting the new battery, you should switch the UPS on and run a self-test function if your model offers this. It is also recommended to fully charge the battery in the UPS for at least 8 hours before first use. Special calibration is not necessary for these models.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC17 kit uses only quality-tested batteries designed for use in UPS systems and guarantees maximum safety.What is the service life of the VISION RBC17 replacement battery?The service life of the installed battery is up to 5 years in typical standby operation in a UPS system at 20°C. The actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or any dealer who sells starter batteries.

The VISION RBC24 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC24 cartridge. Equipped with four high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Featuring maintenance-free AGM technology, this product ensures fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement cassette for APC RBC24, ensures easy and rapid hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and pre-wired for replacement within minutes without operational interruption.High Reliability: Exclusively uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leakproof AGM technology eliminates all maintenance needs over the entire battery lifespan.Durable: Designed for long service life in standby, reliably protecting your systems for years.Economical Solution: Offers the same performance and safety as the original at an attractive price.Strong performance for safety-critical applicationsThe VISION RBC24 cartridge is designed to meet the demanding requirements of APC Smart UPS systems. The installed batteries have a high current capacity and, in the event of a power failure, can immediately deliver the required power to safely shutdown or maintain connected servers, network storage and other critical devices. Stable and reliable performance protects your valuable equipment from damage caused by power fluctuations and outages.Robust engineering for demanding environmentsThe batteries used in the RBC24 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is securely bound in a fibreglass mat. This makes the batteries completely leakproof and allows operation in any position. The low self-discharge enables long storage and immediate readiness. The robust ABS plastic battery case offers outstanding protection against mechanical impacts.Features ModelVISION RBC24 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Nominal voltage (V)24 (system voltage) Capacity (Ah)14 (system capacity) Charging voltage (float)27.0V - 27.6V (system) Charging voltage (cyclic)28.8V - 30.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 8.5 (total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SUA1000RMI2U, SMT750RMI2U  FAQs about the VISION RBC24 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC24 cartridge is designed as a replacement for the original APC RBC24 battery unit and is compatible, among others, with the following APC Smart UPS models: SUA1000RMI2U and SMT750RMI2U. Please check your UPS model’s exact designation before purchase.Is replacing the battery complicated?No, the replacement is extremely simple and can be performed during ongoing operation (hot swap) without technical knowledge. The APC UPS systems have an easily accessible battery compartment. You only need to pull out the old cassette, disconnect the plug, connect the new VISION RBC24 cartridge, and push it back in.Do I need to adjust anything on my UPS after the replacement?After inserting the new cartridge, the UPS usually detects the replacement automatically. It is recommended to note the replacement date of the battery via the software (PowerChute) or on the display and to perform a self-test function. A runtime calibration may be helpful to guarantee accurate remaining runtime indication.Is it safe to use a replacement cassette from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC24 cartridge is expertly assembled, tested and uses only quality-assured batteries that are designed for use in UPS systems and provide maximum safety.What is the lifetime of the VISION RBC24 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What should I bear in mind when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally responsible manner at local collection points, recycling centres or at any retailer that sells starter batteries. 

The VISION RBC123 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC123 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and secure solution for restoring the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC123, it ensures easy and fast installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Durable: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries, so that you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC123 kit is designed to meet the demanding requirements of various APC Back UPS systems. The installed batteries are high-current capable and, in the event of a power failure, can immediately provide the necessary power to safely shut down or continue to operate your connected computers, networks and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC123 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic housing of the batteries provides excellent protection against mechanical impact. Features ModelVISION RBC123 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (Typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC BR1000I, BX1000, BX1000-GR  FAQs about the VISION RBC123 replacement batteryFor which UPS models is this kit suitable?The VISION RBC123 kit is designed as a replacement for the original APC RBC123 battery unit and is compatible, among others, with the following APC Back UPS models: BR1000I, BX1000, BX1000-GR. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is usually very simple and can be performed without technical expertise. Most APC Back UPS systems have an easily accessible battery compartment. You only need to disconnect and remove the old battery unit and attach and insert the new VISION RBC123 kit. Pay attention to the correct wiring of the two batteries.Do I need to set anything on the UPS after replacement?After inserting the new battery, you should switch the UPS on and perform a self-test function if your model offers this. It is also recommended to fully charge the battery in the UPS before first use. A special calibration is usually not necessary with these models.Is using a third-party replacement battery safe?Yes, absolutely. VISION is a reputable manufacturer of high-quality AGM batteries, which often meet or even exceed the specifications of the original batteries. Our RBC123 kit uses only quality-tested batteries that are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC123 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20°C is up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power outages.What should I bear in mind when disposing of the old battery set?Lead batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer who sells starter batteries. 

The VISION RBC124 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC124 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full functionality of your APC Back UPS Pro system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement for APC RBC124, ensures simple and quick installation.High reliability: Uses high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Long-lasting: Designed for long-term use in standby operation, to protect your systems for years.Easy replacement: The kit is supplied as a complete set of two batteries, so you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC124 kit is designed to meet the demanding requirements of various APC Back UPS Pro systems. The installed batteries are high-current capable and, in the event of a power failure, can immediately provide the necessary power to safely shut down or continue to operate your connected computers, networks and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC124 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic case of the batteries provides outstanding protection against mechanical impact.Characteristics  ModelVISION RBC124 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 24 (system) Capacity (Ah)9 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cycle use)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 5.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC BR1200G-GR, BR1500G-GR, BR1500GI  FAQs about the VISION RBC124 replacement batteryFor which UPS models is this kit suitable?The VISION RBC124 kit is designed as a replacement for the original APC RBC124 battery unit and is compatible, among others, with the following APC Back UPS Pro models: BR1200G-GR, BR1500G-GR, and BR1500GI. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is usually very easy and can be carried out without technical expertise. Most APC Back UPS Pro systems have an easily accessible battery compartment. You simply need to disconnect and remove the old battery unit and connect and fit the new VISION RBC124 kit. Please ensure correct wiring of both batteries.Do I need to adjust anything on the UPS after replacement?After inserting the new battery, you should switch the UPS on and perform a self-test function if your model provides this. It is also recommended to fully charge the battery in the UPS before first use. A special calibration is generally not necessary for these models.Is it safe to use a third-party replacement battery?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or even exceed the specifications of the original batteries. Our RBC124 kit uses only quality-tested batteries, which are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC124 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life can be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery pack at municipal collection points, recycling centres or at any retailer who sells starter batteries, free of charge and in an environmentally friendly manner.

The VISION RBC22 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC22 cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement cartridge for APC RBC22, ensures quick and easy hot swap installation.Plug and play installation: The cartridge is supplied fully assembled and wired for replacement in just a few minutes without interrupting operation.High reliability: Uses only high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC22 cartridge is designed to fulfil the demanding requirements of APC Smart UPS systems. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, network storage and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC22 cartridge are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impact.Battery features  ModelVision RBC22 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge (2 batteries) Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)17 (typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (System) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 12.0 (total weight) ConnectionMatching APC system plug Compatibility (extract)APC SU2200RMI3U, SU3000RMI3U  FAQs about the VISION RBC22 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC22 cartridge is designed as a replacement for the original APC RBC22 battery unit and is compatible with the following APC Smart UPS models, among others: SU2200RMI3U and SU3000RMI3U. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is pull out the old cartridge, disconnect the plug, plug in the new VISION RBC22 cartridge and push it back in.Do I have to adjust anything on the UPS after the replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display and to perform a self-test function. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. Vision is a renowned manufacturer of high-quality AGM batteries. Our RBC22 cartridge is professionally assembled, tested and uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC22 replacement cartridge?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cartridge free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any retailer that sells starter batteries.

The VISION RBC43 is a high-quality, ready-to-install replacement battery cassette, designed as a direct and reliable substitute for the original APC RBC43 cartridge. Fitted with eight high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution for restoring the full functionality of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power supply for your business-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement cassette for APC RBC43, ensures simple and fast hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and wired for replacement within minutes without service interruption.High Reliability: Uses only high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary throughout their entire service life.Durable: Designed for a long service life in standby mode, to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC43 cartridge is designed to meet the demanding requirements of APC Smart UPS systems in the 2200VA and 3000VA classes. The installed batteries are high-current capable and can immediately supply the necessary power in the event of a power failure to safely shut down or continue to operate your connected servers, network storage and other critical devices. The stable and reliable performance protects your valuable hardware against damage caused by voltage fluctuations and failures.Robust engineering for demanding environmentsThe batteries used in the RBC43 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a fibreglass mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long storage time and operational readiness. The robust ABS plastic battery housing provides excellent protection against mechanical impact.Features  ModelVISION RBC43 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (8 batteries) Rated voltage (V)48 (system voltage) Capacity (Ah)10 (system capacity) Charging voltage (float charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 23.0 (total weight) ConnectionSuitable APC system connector Compatibility (excerpt)APC SMT2200I, SMT3000I, SUA2200I, SUA3000I  FAQs about the VISION RBC43 replacement battery cassetteFor which UPS models is this cartridge suitable?The VISION RBC43 cartridge is designed as a replacement for the original APC RBC43 battery unit and is, among others, compatible with the following APC Smart UPS models: SMT2200I, SMT2200RMI2U, SMT3000I, SMT3000RMI2U, SUA2200I, SUA3000I. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, the replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. You only need to pull out the old cassette, disconnect the connector, connect the new VISION RBC43 cartridge and push it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS will usually recognise the replacement automatically. It is recommended to use the software (PowerChute) or the display to note the battery replacement date and to run a self-test function. A runtime calibration can be useful to ensure an accurate remaining runtime display.Is it safe to use a third-party replacement cassette?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC43 cartridge is expertly assembled, tested and uses only quality-tested batteries that are designed for use in UPS units and ensure maximum safety.What is the service life of the VISION RBC43 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual service life can be influenced by factors such as ambient temperature and frequency of power failures.What must I observe when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cassette free of charge and in an environmentally responsible way at municipal collection points, recycling centres or at any dealer selling starter batteries.

The VISION RBC132 is a high-quality and ready-to-install replacement battery cartridge, designed as a direct and reliable replacement for the original APC RBC132 Cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Featuring maintenance-free AGM technology, this product ensures fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Designed as a precision-fit replacement cartridge for APC RBC132, ensures quick and easy hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired, for replacement in just a few minutes without interrupting operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary over their entire service life.Long-lasting: Designed for long life in standby mode, to reliably protect your systems for years.Cost-effective solution: Provides the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC132 Cartridge is designed to meet the demanding requirements of APC Smart UPS systems of the 2200VA and 3000VA class. The batteries used are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, network storage and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC132 Cartridge are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long storage capability and readiness for use. The robust ABS plastic housing of the batteries offers excellent protection against mechanical influences.Characteristics  ModelVISION RBC132 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, Plug & Play Nominal voltage (V)48 (system voltage) Capacity (Ah)5 (typical value) Charging voltage (float charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.5 ConnectionMatching APC system connector Compatibility (excerpt)APC SMT2200RMI2U, SMT3000RMI2U  FAQs about the VISION RBC132 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC132 cartridge is designed as a replacement for the original APC RBC132 battery unit and is compatible, among others, with the following APC Smart UPS models: SMT2200RMI2U and SMT3000RMI2U. Please check the exact designation of your UPS system before purchasing.Is the battery replacement complicated?No, the replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS units have an easily accessible battery compartment. You only need to pull out the old cassette, disconnect the plug, plug in the new VISION RBC132 cartridge and slide it back in.Do I need to set anything on the UPS after replacing?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display, and to perform a self-test function. A runtime calibration may be useful to ensure the exact remaining time display.Is using a third-party replacement cassette safe?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC132 cartridge is expertly assembled, tested and uses only certified quality batteries designed for use in UPS units and to ensure the highest safety.What is the service life of the VISION RBC132 cartridge?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual lifetime may be affected by factors such as ambient temperature and the frequency of power failures.What do I have to consider when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette at municipal collection points, recycling centres or at any dealer who sells starter batteries free of charge and in an environmentally friendly manner. 

The VISION RBC133 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC133 Cartridge. Fitted with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power for your business-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement cartridge for APC RBC133, enabling simple and fast hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and wired for a replacement in minutes without interrupting operation.High Reliability: Uses only high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-Free: The leakproof AGM technology renders any battery maintenance unnecessary over the entire service life.Durable: Designed for long service life in standby operation to protect your systems reliably for years.Economical Solution: Provides the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC133 Cartridge is designed to meet the demanding requirements of APC Smart UPS systems of the 3000VA class. The installed batteries are high-current capable and can provide the required power immediately in the event of a power failure, ensuring your connected servers, network storage and other critical devices can be safely shut down or continue operation. The stable and reliable performance safeguards your valuable hardware against damage from power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC133 Cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely embedded in a glass fibre mat. This makes the batteries completely leakproof and allows operation in any position. Low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic battery case provides excellent protection against mechanical impact.Features  ModelVISION RBC133 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, Plug & Play Nominal voltage (V)48 (System voltage) Capacity (Ah)5 (Typical value) Charging voltage (float)54.0V - 55.2V (System) Charging voltage (cyclic operation)57.6V - 60.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.5 ConnectionMatching APC system plug Compatibility (excerpt)APC SMT3000RMT2U, SMX3000RMLV2U  FAQs about the VISION RBC133 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC133 cartridge is designed to replace the original APC RBC133 battery unit and is compatible, among others, with the following APC Smart UPS models: SMT3000RMT2U, SMX2000RMLV2U, SMX3000RMHV2U, SMX3000RMLV2U. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have a readily accessible battery compartment. You simply need to remove the old cartridge, disconnect the plug, connect the new VISION RBC133 cartridge and slide it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display and to perform a self-test function. Runtime calibration can be useful to ensure an accurate remaining run time display.Is using a replacement cartridge from third-party manufacturers safe?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC133 cartridge is expertly assembled, tested and uses only quality-checked batteries designed for use in UPS systems to ensure maximum safety.What service life does the VISION RBC133 replacement cartridge have?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life may be affected by conditions such as ambient temperature and the frequency of power failures.What do I need to observe when disposing of the old cartridge?Lead batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cartridge free of charge and in an environmentally friendly way at municipal collection points, recycling centres or at any retailer who sells starter batteries.