RBC Catridges

The VISION RBC157 is a high-quality, ready-to-install replacement battery cassette, designed as a direct and reliable replacement for the original APC RBC157 cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement cassette for APC RBC157, ensures simple and quick hot swap installation.Plug and Play installation: The cartridge is delivered fully assembled and wired for a replacement in just a few minutes without interrupting operation.High reliability: Uses only high-quality AGM batteries, which are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary throughout its service life.Long-lasting: Designed for long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC157 cartridge is designed to meet the demanding requirements of APC Smart UPS systems such as SMT1000RMI2UC. The installed batteries are high-current capable and can provide the required power immediately in the event of a power failure, to safely shut down or continue operating your connected servers, network storage and other critical equipment. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC157 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust batteries housing made of ABS plastic offers excellent protection against mechanical impacts.Characteristics  ModelVISION RBC157 replacement battery cassette Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette, Plug & Play Rated voltage (V)48 (system voltage) Capacity (Ah)5 (typical value) Charging voltage (trickle charge)54.0V - 55.2V (system) Charging voltage (cycle operation)57.6V - 60.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.0 ConnectionCompatible APC system connector Compatibility (extract)APC SMT1000RMI2UC  FAQs about the VISION RBC157 replacement battery cassetteFor which UPS models is this cartridge suitable?The VISION RBC157 cartridge is designed as a replacement for the original APC RBC157 battery unit and is compatible, among others, with the APC Smart UPS model SMT1000RMI2UC. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, the replacement is very simple and can be carried out during ongoing operation (Hot Swap) without any technical knowledge. The APC UPS systems have an easily accessible battery compartment. You simply have to pull out the old cassette, unplug it, plug in the new VISION RBC157 cartridge and reinsert it.Do I need to adjust anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via software (PowerChute) or on the display and to run a self-test function. A runtime calibration can be useful to ensure the exact remaining runtime indication.Is it safe to use a replacement cassette from third-party suppliers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC157 cartridge is professionally assembled, tested and uses only quality-tested batteries that are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC157 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I have to note when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cassette free of charge and in an environmentally friendly manner at municipal collection points, recycling depots or any retailer who sells starter batteries. 

The VISION RBC152 is a high-quality and ready-to-install Replacement battery cartridgewhich can be used as a direct and reliable replacement for the original APC RBC152 Cartridge was designed. Equipped with a high-performance, valve-controlled VRLA batteryoffers this Cartridge a cost-effective and safe solution for restoring the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technologyThis product guarantees a fail-safe power supply for your connected devices.Highlights at a glance100% compatible: Developed as a perfect fit Replacement for APC RBC152ensures quick and easy installation.Plug and play installation: The Cartridge is supplied fully assembled and wired for quick and easy replacement.High reliability: Uses a high quality AGM batterydesigned for the demanding UPS operation is optimised.Maintenance-free: The leak-proof AGM technology makes any maintenance of the Battery over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe Vision RBC152 Cartridge is designed to meet the demanding requirements of APC Back UPS systems to fulfil. The installed Battery is High current capability and can immediately provide the power you need to safely shut down or continue operating your connected computers, networks and other critical devices in the event of a power outage. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe cartridge included in the RBC152 Cartridge used Battery based on the proven VRLA technology (Valve Regulated Lead Acid) with a AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the Battery absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust housing of the Battery made of ABS plastic offers excellent protection against mechanical impact.Features  ModelVision RBC152 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, plug & play Rated voltage (V)12 (system voltage) Capacity (Ah)9 (Typical value) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 2.6 ConnectionMatching APC system plug Compatibility (extract)APC BVS1000I, BVX1200LI-GR  FAQs on the VISION RBC152 replacement battery cartridgeFor which UPS models is this cartridge suitable?The Vision RBC152 Cartridge is available as Replacement for the original APC RBC152 battery unit and is compatible with the following APC Back UPS models compatible: BVS1000I and BVX1200LI-GR. Please check the exact designation of your system before purchasing UPS system.Is replacing the battery complicated?No, the replacement is usually very simple and can be carried out without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you need to do is remove the old Cartridge Pull out, disconnect the plug, insert the new Vision RBC152 Cartridge plug in and insert again.Do I need to make any adjustments to the UPS after replacing it?After inserting the new Cartridge recognises the UPS the replacement usually automatically. It is recommended that the UPS leave it connected to the mains for a few hours without interruption after replacement so that the new Battery is fully charged. A subsequent self-test, if supported by the device, is also advisable.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC152 Cartridge is professionally assembled, tested and uses only quality-tested components Batteriesdesigned for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC152 replacement cartridge?The service life of the installed Battery in typical standby operation in one UPS system at 20 °C up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old Cartridge at municipal collection centres, recycling centres or at any dealer who sells starter batteries, free of charge and in an environmentally friendly manner. 

The VISION RBC115 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC115 cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement cartridge for APC RBC115, ensures quick and easy hot swap installation.Plug and play installation: The cartridge is supplied fully assembled and wired for replacement in just a few minutes.High reliability: Uses only high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC115 cartridge is designed to meet the demanding requirements of APC Smart UPS systems to fulfil. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, networks and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC115 Cartridge are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impacts.Features  ModelVISION RBC115 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, plug & play Rated voltage (V)24 (system voltage) Capacity (Ah)7 (Typical value) Charging voltage (trickle charge)27.0V - 27.6V (System) Charging voltage (cycle operation)28.8V - 30.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 5.5 ConnectionMatching APC system plug Compatibility (extract)APC SMT750RMI2U, SMX750I  FAQs for the VISION RBC115 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC115 cartridge is designed as a replacement for the original APC RBC115 battery unit and is compatible with the following APC Smart UPS models, among others: SMT750RMI2U and SMX750I. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, the replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is pull out the old cartridge, disconnect the plug, plug in the new VISION RBC115 cartridge and push it back in.Do I need to make any adjustments to the UPS after replacing it?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display and to perform a self-test function. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC115 cartridge is expertly assembled, tested and uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC115 replacement cartridge?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cartridge free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any retailer that sells starter batteries. 

The VISION RBC23 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC23 cartridge. Equipped with four high-performance, valve-regulated VRLA batteries, this cartridge provides a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as an exact-fit replacement cassette for APC RBC23, ensures quick and easy hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired for replacement in minutes without interruption of operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary throughout the whole service life.Durable: Designed for a long service life in standby operation, to reliably protect your systems for years.Economic Solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC23 cartridge is designed to meet the demanding requirements of APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue to operate your connected servers, network storage and other critical devices. The stable and reliable performance protects your valuable hardware from damage due to power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC23 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is securely bound in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic housing of the batteries provides excellent protection against mechanical impact.Features  ModelVISION RBC23 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Nominal voltage (V)48 (system voltage) Capacity (Ah)7 (typical value, per battery) Charging voltage (trickle charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 8.5 (total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SUA2200RMI2U, SUA3000RMI2U  FAQs about the VISION RBC23 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC23 cartridge is designed as a replacement for the original APC RBC23 battery unit and is compatible, among others, with the following APC Smart UPS models: SUA2200RMI2U and SUA3000RMI2U. Please check the exact designation of your UPS system before purchasing.Is battery replacement complicated?No, replacement is very easy and can be carried out during operation (hot swap) without technical expertise. APC UPS units have an easily accessible battery compartment. Simply pull out the old cassette, disconnect the plug, plug in the new VISION RBC23 cartridge and push it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software (PowerChute) or display and to carry out a self-test function. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cassette from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC23 cartridge is expertly assembled, tested and uses only quality-checked batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC23 replacement cassette?The service life of the batteries used in typical standby operation in a UPS at 20 °C is up to 5 years. The actual service life can be affected by factors such as ambient temperature and frequency of power failures.What must I consider when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer selling starter batteries. 

The VISION RBC44 is a high-quality, ready-to-install replacement battery cassette designed as a direct and reliable replacement for the original APC RBC44 cartridge. Fitted with four high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore full performance of your APC Smart UPS XL system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power for your business-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement cassette for APC RBC44, ensures easy and quick hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired for replacement in just a few minutes with no interruption in operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary throughout their service life.Durable: Designed for prolonged service life in standby operation to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC44 cartridge is designed to meet the demanding requirements of APC Smart UPS XL systems. The installed batteries are high-current capable and can instantly provide the required performance in the event of a power failure to safely shut down or continue running your connected servers, network storage and other critical devices. Its stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC44 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), which safely binds the electrolyte in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long storage and readiness. The tough ABS plastic case of the batteries provides excellent protection against mechanical impacts.Features  ModelVISION RBC44 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Rated voltage (V)48 (System Voltage) Capacity (Ah)17 (Typical value, per battery) Charging voltage (trickle charge)54.0V - 55.2V (System) Charging voltage (cycle operation)57.6V - 60.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 24.0 (Total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SU2200RMXL3U, SU3000RMXL3U  FAQs about the VISION RBC44 replacement battery cartridgeWhich UPS models is this cartridge suitable for?The VISION RBC44 cartridge is designed as a replacement for the original APC RBC44 battery unit and is, among others, compatible with the following APC Smart UPS XL models: SU2200RMXL3U, SU2200RMXLI3U and SU3000RMXL3U. Please check the exact model designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is very simple and can be performed during operation (hot swap) with no technical expertise. The APC UPS systems have an easily accessed battery compartment. You only have to pull out the old cassette, disconnect the plug, connect the new VISION RBC44 cartridge and slide it back in.Do I have to set anything on the UPS after replacement?After inserting the new cartridge, the UPS generally recognises the replacement automatically. It is recommended to note the battery replacement date using the software (PowerChute) or the display and to carry out a self-test function. A runtime calibration can be useful to ensure the correct remaining runtime display.Is it safe to use a third-party replacement cassette?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC44 cassette is expertly assembled, tested and uses only quality-approved batteries designed for use in UPS systems and ensures maximum safety.What is the service life of the VISION RBC44 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby mode in a UPS system at 20 °C. Actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I have to consider when disposing of the old cassette?Lead batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally friendly way at municipal collection points, recycling centres or any retailer selling starter batteries. 

The VISION RBC24 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC24 cartridge. Equipped with four high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Featuring maintenance-free AGM technology, this product ensures fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement cassette for APC RBC24, ensures easy and rapid hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and pre-wired for replacement within minutes without operational interruption.High Reliability: Exclusively uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leakproof AGM technology eliminates all maintenance needs over the entire battery lifespan.Durable: Designed for long service life in standby, reliably protecting your systems for years.Economical Solution: Offers the same performance and safety as the original at an attractive price.Strong performance for safety-critical applicationsThe VISION RBC24 cartridge is designed to meet the demanding requirements of APC Smart UPS systems. The installed batteries have a high current capacity and, in the event of a power failure, can immediately deliver the required power to safely shutdown or maintain connected servers, network storage and other critical devices. Stable and reliable performance protects your valuable equipment from damage caused by power fluctuations and outages.Robust engineering for demanding environmentsThe batteries used in the RBC24 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is securely bound in a fibreglass mat. This makes the batteries completely leakproof and allows operation in any position. The low self-discharge enables long storage and immediate readiness. The robust ABS plastic battery case offers outstanding protection against mechanical impacts.Features ModelVISION RBC24 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Nominal voltage (V)24 (system voltage) Capacity (Ah)14 (system capacity) Charging voltage (float)27.0V - 27.6V (system) Charging voltage (cyclic)28.8V - 30.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 8.5 (total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SUA1000RMI2U, SMT750RMI2U  FAQs about the VISION RBC24 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC24 cartridge is designed as a replacement for the original APC RBC24 battery unit and is compatible, among others, with the following APC Smart UPS models: SUA1000RMI2U and SMT750RMI2U. Please check your UPS model’s exact designation before purchase.Is replacing the battery complicated?No, the replacement is extremely simple and can be performed during ongoing operation (hot swap) without technical knowledge. The APC UPS systems have an easily accessible battery compartment. You only need to pull out the old cassette, disconnect the plug, connect the new VISION RBC24 cartridge, and push it back in.Do I need to adjust anything on my UPS after the replacement?After inserting the new cartridge, the UPS usually detects the replacement automatically. It is recommended to note the replacement date of the battery via the software (PowerChute) or on the display and to perform a self-test function. A runtime calibration may be helpful to guarantee accurate remaining runtime indication.Is it safe to use a replacement cassette from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC24 cartridge is expertly assembled, tested and uses only quality-assured batteries that are designed for use in UPS systems and provide maximum safety.What is the lifetime of the VISION RBC24 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What should I bear in mind when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally responsible manner at local collection points, recycling centres or at any retailer that sells starter batteries. 

The VISION RBC140 is a high-quality and ready-to-install Replacement battery cartridgewhich can be used as a direct and reliable replacement for the original APC RBC140 Cartridge was designed. Equipped with high-performance, valve-controlled VRLA batteriesoffers this Cartridge A cost-effective and safe solution for restoring the full performance of your APC Smart UPS Online system. Equipped with maintenance-free AGM technologyThis product guarantees a fail-safe power supply for your business-critical applications.Highlights at a glance100% compatible: Developed as a perfect fit Replacement for APC RBC140ensures quick and easy replacement of the Hot Swap Installation.Plug and play installation: The Cartridge is supplied fully assembled and wired for replacement in just a few minutes without interrupting operation.High reliability: Uses only high quality AGM batteriesdesigned for the demanding UPS operation are optimised.Maintenance free: The leak-proof AGM technology eliminates the need for battery maintenance over the entire service life.Durable: Designed for a long service life in standby mode to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe Vision RBC140 Cartridge is designed to meet the demanding requirements of APC Smart UPS Online systems of the 5kVA to 10kVA class. The installed Batteries are High current capability and can immediately provide the power you need to safely shut down or continue operating your connected servers, network storage and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe cartridge included in the RBC140 Cartridge used Batteries are based on the proven VRLA technology (Valve Regulated Lead Acid) with a AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the Batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust housing of the Batteries made of ABS plastic offers excellent protection against mechanical impact.Battery features ModelVision RBC140 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, plug & play Nominal voltage (V)192 (system voltage) Capacity (Ah)5 (Typical value) Charging voltage (trickle charge)216.0V - 220.8V (system) Charging voltage (cycle operation)230.4V - 240.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 23.0 ConnectionMatching APC system plug Compatibility (extract)APC SRT5KXLI, SRT6KXLI, SRT8KXLI, SRT10KXLI  FAQs on the VISION RBC140 replacement battery cartridgeFor which UPS models is this cartridge suitable?The Vision RBC140 Cartridge is available as Replacement for the original APC RBC140 battery unit and is compatible with the following APC Smart UPS Online models compatible: SRT5KXLI, SRT5KRMXLI, SRT6KXLI, SRT6KRMXLI, SRT8KXLI, SRT8KRMXLI, SRT10KXLI, SRT10KRMXLI. Before purchasing, please check the exact designation of your UPS system.Is replacing the battery complicated?No, replacement is very simple and can be carried out during operation (Hot Swap) can be carried out without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is remove the old Cartridge Pull out, disconnect the plug, insert the new Vision RBC140 Cartridge plug in and insert again.Do I need to make any adjustments to the UPS after replacing it?After inserting the new Cartridge recognises the UPS usually replaces the battery automatically. It is recommended to use the software or the display to set the replacement date of the Battery and perform a self-test function. A runtime calibration can be useful to ensure the exact remaining runtime display.Is it safe to use a replacement cartridge from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC140 Cartridge is professionally assembled, tested and uses only quality-tested components Batterieswhich are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC140 replacement cartridge?The service life of the installed Batteries in typical standby operation in one UPS system at 20 °C up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old cartridge?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old Cartridge at municipal collection points, recycling centres or at any dealer who sells starter batteries, free of charge and in an environmentally friendly manner.

The VISION RBC43 is a high-quality, ready-to-install replacement battery cassette, designed as a direct and reliable substitute for the original APC RBC43 cartridge. Fitted with eight high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution for restoring the full functionality of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power supply for your business-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement cassette for APC RBC43, ensures simple and fast hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and wired for replacement within minutes without service interruption.High Reliability: Uses only high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary throughout their entire service life.Durable: Designed for a long service life in standby mode, to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC43 cartridge is designed to meet the demanding requirements of APC Smart UPS systems in the 2200VA and 3000VA classes. The installed batteries are high-current capable and can immediately supply the necessary power in the event of a power failure to safely shut down or continue to operate your connected servers, network storage and other critical devices. The stable and reliable performance protects your valuable hardware against damage caused by voltage fluctuations and failures.Robust engineering for demanding environmentsThe batteries used in the RBC43 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a fibreglass mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long storage time and operational readiness. The robust ABS plastic battery housing provides excellent protection against mechanical impact.Features  ModelVISION RBC43 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (8 batteries) Rated voltage (V)48 (system voltage) Capacity (Ah)10 (system capacity) Charging voltage (float charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 23.0 (total weight) ConnectionSuitable APC system connector Compatibility (excerpt)APC SMT2200I, SMT3000I, SUA2200I, SUA3000I  FAQs about the VISION RBC43 replacement battery cassetteFor which UPS models is this cartridge suitable?The VISION RBC43 cartridge is designed as a replacement for the original APC RBC43 battery unit and is, among others, compatible with the following APC Smart UPS models: SMT2200I, SMT2200RMI2U, SMT3000I, SMT3000RMI2U, SUA2200I, SUA3000I. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, the replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. You only need to pull out the old cassette, disconnect the connector, connect the new VISION RBC43 cartridge and push it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS will usually recognise the replacement automatically. It is recommended to use the software (PowerChute) or the display to note the battery replacement date and to run a self-test function. A runtime calibration can be useful to ensure an accurate remaining runtime display.Is it safe to use a third-party replacement cassette?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC43 cartridge is expertly assembled, tested and uses only quality-tested batteries that are designed for use in UPS units and ensure maximum safety.What is the service life of the VISION RBC43 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual service life can be influenced by factors such as ambient temperature and frequency of power failures.What must I observe when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cassette free of charge and in an environmentally responsible way at municipal collection points, recycling centres or at any dealer selling starter batteries.

The VISION RBC132 is a high-quality and ready-to-install replacement battery cartridge, designed as a direct and reliable replacement for the original APC RBC132 Cartridge. Equipped with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Featuring maintenance-free AGM technology, this product ensures fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Designed as a precision-fit replacement cartridge for APC RBC132, ensures quick and easy hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired, for replacement in just a few minutes without interrupting operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary over their entire service life.Long-lasting: Designed for long life in standby mode, to reliably protect your systems for years.Cost-effective solution: Provides the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC132 Cartridge is designed to meet the demanding requirements of APC Smart UPS systems of the 2200VA and 3000VA class. The batteries used are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, network storage and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC132 Cartridge are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long storage capability and readiness for use. The robust ABS plastic housing of the batteries offers excellent protection against mechanical influences.Characteristics  ModelVISION RBC132 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, Plug & Play Nominal voltage (V)48 (system voltage) Capacity (Ah)5 (typical value) Charging voltage (float charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.5 ConnectionMatching APC system connector Compatibility (excerpt)APC SMT2200RMI2U, SMT3000RMI2U  FAQs about the VISION RBC132 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC132 cartridge is designed as a replacement for the original APC RBC132 battery unit and is compatible, among others, with the following APC Smart UPS models: SMT2200RMI2U and SMT3000RMI2U. Please check the exact designation of your UPS system before purchasing.Is the battery replacement complicated?No, the replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS units have an easily accessible battery compartment. You only need to pull out the old cassette, disconnect the plug, plug in the new VISION RBC132 cartridge and slide it back in.Do I need to set anything on the UPS after replacing?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display, and to perform a self-test function. A runtime calibration may be useful to ensure the exact remaining time display.Is using a third-party replacement cassette safe?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC132 cartridge is expertly assembled, tested and uses only certified quality batteries designed for use in UPS units and to ensure the highest safety.What is the service life of the VISION RBC132 cartridge?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual lifetime may be affected by factors such as ambient temperature and the frequency of power failures.What do I have to consider when disposing of the old cassette?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette at municipal collection points, recycling centres or at any dealer who sells starter batteries free of charge and in an environmentally friendly manner. 

The VISION RBC133 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC133 Cartridge. Fitted with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power for your business-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement cartridge for APC RBC133, enabling simple and fast hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and wired for a replacement in minutes without interrupting operation.High Reliability: Uses only high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-Free: The leakproof AGM technology renders any battery maintenance unnecessary over the entire service life.Durable: Designed for long service life in standby operation to protect your systems reliably for years.Economical Solution: Provides the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC133 Cartridge is designed to meet the demanding requirements of APC Smart UPS systems of the 3000VA class. The installed batteries are high-current capable and can provide the required power immediately in the event of a power failure, ensuring your connected servers, network storage and other critical devices can be safely shut down or continue operation. The stable and reliable performance safeguards your valuable hardware against damage from power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC133 Cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely embedded in a glass fibre mat. This makes the batteries completely leakproof and allows operation in any position. Low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic battery case provides excellent protection against mechanical impact.Features  ModelVISION RBC133 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, Plug & Play Nominal voltage (V)48 (System voltage) Capacity (Ah)5 (Typical value) Charging voltage (float)54.0V - 55.2V (System) Charging voltage (cyclic operation)57.6V - 60.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.5 ConnectionMatching APC system plug Compatibility (excerpt)APC SMT3000RMT2U, SMX3000RMLV2U  FAQs about the VISION RBC133 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC133 cartridge is designed to replace the original APC RBC133 battery unit and is compatible, among others, with the following APC Smart UPS models: SMT3000RMT2U, SMX2000RMLV2U, SMX3000RMHV2U, SMX3000RMLV2U. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have a readily accessible battery compartment. You simply need to remove the old cartridge, disconnect the plug, connect the new VISION RBC133 cartridge and slide it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display and to perform a self-test function. Runtime calibration can be useful to ensure an accurate remaining run time display.Is using a replacement cartridge from third-party manufacturers safe?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC133 cartridge is expertly assembled, tested and uses only quality-checked batteries designed for use in UPS systems to ensure maximum safety.What service life does the VISION RBC133 replacement cartridge have?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life may be affected by conditions such as ambient temperature and the frequency of power failures.What do I need to observe when disposing of the old cartridge?Lead batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cartridge free of charge and in an environmentally friendly way at municipal collection points, recycling centres or at any retailer who sells starter batteries.