Commercial storage
Deye GE-F60 – State-of-the-art energy storage solution for domestic and commercial applications
Deye’s GE-F60 series represents the next generation of intelligent high-voltage energy storage systems. It combines high-performance lithium iron phosphate (LiFePO4) technology with an integrated energy management system, thereby offering a reliable, safe and scalable solution for energy storage, for both domestic and industrial use.Highlights at a glanceCapable of black start & suitable for off-grid use: Automatic restart in the event of a power cut High efficiency and service life: Over 6,000 charge cycles with minimal capacity loss Scalable up to 600 kWh & 500 kW: Flexible expansion to meet growing requirements IP55-certified: Dust- and splash-proof for a wide range of locations Safety & security of the highest standardThe GE-F60 sets new standards in terms of safety:Active gas, smoke and temperature monitoring Aerosol fire-extinguishing system in the module & complete system Redundant power supply for maximum reliability Intelligent cell balancing and automatic fault detection Scalable for any applicationThe basic system comprises 12 modules, each with a capacity of 5.12 kWh, resulting in a total capacity of 61.44 kWh (55.29 kWh usable). Depending on the application, the battery capacity can be expanded to up to 360 kWh. Up to 10 systems can be connected in parallel via the AC side, making them well-suited for large commercial or industrial projects.Who is the Deye GE-F60 suitable for?Private households seeking maximum energy independence SMEs & industrial facilities requiring a stable power supply and peak load management Emergency power systems that must be fail-safe and capable of black start PV projects with high output and storage requirements Off-grid systems, e.g. for remote buildings or isolated gridsFAQs on the Deye GE-F60 energy storage solutionHow much energy is available when the unit is fully loaded?A tower comprising 12 modules delivers 61.44 kWh gross. With a depth of discharge of 90 %, approximately 55.29 kWh of this is usable.What voltages and currents apply?The nominal system voltage is 614 V. The operating range is from 480 to 700 V. The continuous discharge current is specified as 100 A; up to 125 A is possible for short periods.To what extent can the system be scaled?For larger commercial or industrial applications, up to six GE-F60 units can be operated in parallel. This enables total capacities of up to 360 kWh to be achieved.Which inverters is the system compatible with?The GE-F60 is fully pre-configured for hybrid inverters in the SUN-29.9K/30K/35K-SG01HP3-EU-BM3 and SUN-40K/50K-SG01HP3-EU-BM4 series. The appropriate CAN profile (code 00) is already pre-programmed at the factory; manual configuration is not required. It is strongly recommended that you check the compatibility list, as the manufacturer may make changes.What safety features are built in?The safety concept includes gas and smoke detection, active pressure relief, an integrated aerosol extinguishing cartridge and an automatic shut-off within three seconds. These measures specifically address common concerns regarding installation indoors or in the cellar.
Deye GE-F120-2H2 – The future of smart energy management
The GE-F120-2H2 ‘ Deye ’ represents a new generation of high-performance hybrid energy storage systems for residential, commercial and industrial applications. With a rated power of 50 kW and an impressive storage capacity of 120 kWh, this high-voltage system is the ideal solution for complex energy requirements, maximum operational reliability and complete energy independence.Highlights at a glanceGenerous storage capacity: 120 kWh of energy for peak loads and long-term buffering Fast charging/discharging: Optimised for dynamic energy cycles Redundant power supply: Maximum reliability for critical applications Black-start function: Automatic restart possible without a network connection Safe battery technology: Long-lasting & thermally stable LiFePO4 cells Smart storage solution offering maximum flexibilityWith the GE-F120-2H2, Deye combines state-of-the-art technology in a single integrated system: a hybrid inverter, lithium iron phosphate (LFP) batteries and an advanced energy management system (EMS) work seamlessly together. This enables energy flows to be optimised, self-consumption to be maximised and peak loads to be efficiently absorbed, entirely without external support.Redundancy & Black Start: Reliable even in extreme circumstancesThe redundant power supply design guarantees uninterrupted operation even in the event of partial failures. The black-start function allows the system to restart completely without an external power source, making it ideal for off-grid installations or in the event of power cuts in critical infrastructure.LFP technology: Safety & service lifeThe LiFePO4 batteries fitted offer: High thermal stability Long service life & over 6,000 charge cycles Low risk of thermal runaway Sustainability & environmental friendliness Who is the GE-F120-2H2 suitable for?Industrial plants with peak load management PV-powered emergency power supply in commercial buildings Off-grid power supply Critical systems requiring redundancy Large private estates with high energyFAQs on the GE-F120-2H2 Energy Storage System ( Deye )How much energy is actually available?One cabinet provides a gross capacity of 120 kWh, of which around 110 kWh is usable at a 90% depth of discharge – ideal for commercial and industrial businesses with high storage requirements.Is 50 kW sufficient for continuous loads?Yes. The integrated power electronics (PCS) provide 50 kW of continuous power and can supply up to 125 A for 10 seconds, making it sufficiently rated even for peak loads.Can I expand the system later?Up to ten cabinets can be operated in parallel. This enables capacities of up to 1.2 MWh and a total AC output of 500 kW without the need for a system change or additional infrastructure.How hot can the system get?The cell temperature must not exceed 35 °C under full load. The integrated thermal management module automatically monitors and regulates the temperature to prevent a drop in performance or premature ageing.Which inverter is suitable for the system?The integrated 50 kW PCS is pre-configured at the factory for all three-phase Deye hybrid inverters in the SUN-29.9 kW to 50 kW series; plug-and-play operation is possible without additional components. It is strongly recommended that you check the compatibility list, as the manufacturer may make changes.Do I need external NA protection?No, the power conversion stack meets the requirements of VDE-AR-N 4105 and EN 50549-1/-2 and incorporates an integrated anti-islanding protection circuit; additional NA protection is not required.
Deye BOS-A – 99.84 kWh high-voltage battery storage system for commercial and industrial use
The Deye BOS-A System in the 100 kWh configuration is a high-performance, modular high-voltage storage solution that has been specially developed to meet the requirements of commercial enterprises, industrial facilities and large-scale PV projects. Based on the robust BOS-A battery module (7.68 kWh per unit), this system offers a substantial energy reserve for emergency power supply and the optimisation of self-consumption from renewable energy sources.By using the secure Lithium iron phosphate technology (LiFePO4) and an intelligent, cloud-based management system, the storage system guarantees maximum reliability and efficiency. The system is optimised for installation in rack environments and allows for quick assembly and straightforward maintenance in a professional setting.Highlights at a glanceMassive capacity: With a capacity of around 100 kWh (achieved by 13 modules connected in series), the system offers enormous reserves for industrial applications and peak shaving.Safe LiFePO4 chemistry: The cobalt-free cell chemistry ensures maximum thermal stability and an extremely long service life of over 6,000 cycles.Intelligent cloud management: Real-time monitoring of energy consumption and battery status via the Deye cloud platform to optimise operating costs.High-voltage efficiency: The modules’ series connection ensures a high system voltage, which minimises conversion losses and increases efficiency to over 90%.Effortless installation: The embedded design and a module weight of approx. 70 kg allow for a structured installation in standard rack systems.Robust industrial design: High IP rating and resistance to a variety of environmental conditions for long-term use in technical rooms.Comprehensive warranty: A 10-year manufacturer’s warranty and a full replacement guarantee for up to 6,000 charge cycles offer long-term investment security.Areas of applicationThe 100 kWh version of the BOS-A is the ideal solution for demanding large-scale projects:Industrial & commercial enterprisesEnsuring an uninterruptible power supply (UPS) for critical machinery and reducing costly peak loads.Large-scale photovoltaic systemsEfficient temporary storage of solar power to maximise the self-sufficiency rate in office buildings or agricultural businesses.Neighbourhood energy storageA centralised storage solution for housing estates or local authority energy projects for the shared use of solar power.Installation & Safety InstructionsRack configurationThe system achieves its capacity by connecting up to 13 battery modules in series per rack. Ensure that they are securely fastened in the control cabinet.Safety managementThe integrated Smart-BMS protects each module individually against overcharging, deep discharge and short circuits. Communication takes place seamlessly via CAN 2.0.Structural analysis & weightA fully equipped 100 kWh rack weighs approx. 900–1000 kg. Ensure that the foundation at the installation site is designed to support these loads. FAQs on the Deye BOS-A 100 kWh storage systemCan the 100 kWh system be scaled up even further?Yes. Several racks can be connected in parallel to achieve total capacities in the megawatt range. The modular design allows the system to be tailored precisely to your company’s growing energy requirements.How does the emergency power supply work with a system of this size?Automatic and powerful. When combined with a suitable Deye high-voltage inverter, the system can switch to battery power within milliseconds in the event of a power cut, thereby continuing to supply even heavy industrial loads without interruption.Why is the BMS so important in this system?For balance and safety. When 13 modules are connected in series, the BMS ensures that all cells are charged and discharged evenly. This prevents individual modules from ageing prematurely and maximises the usable energy of the entire 100 kWh block.Does the system require a lot of maintenance?No. Thanks to the fanless design of the battery modules and the robust LiFePO4 technology, the system is virtually maintenance-free. Remote monitoring via the cloud also makes it possible to detect anomalies before they become a problem.
Deye MS-GS215-2H3 On & Off Grid Battery Storage System
The Deye MS-GS215-2H3 is an air-cooled solar and battery storage system for commercial and industrial applications. With a storage capacity of 215 kWh, an AC output of 100 kW and an integrated PV connection of up to 200 kWp, the system is ideally suited for grid-connected applications, backup solutions and off-grid scenarios. Its compact design, IP54 outdoor protection rating and communication interfaces ETH/4G, CAN, RS485 and Ethernet make the system a high-performance, all-in-one solution for optimising self-consumption, load management and security of supply. Highlights at a glance 215 kWh storage capacity for demanding C&I applications 100 kW AC output power for on-grid, backup and off-grid operation Integrated PV connection with up to 200 kWp PV access power, 160 kW PV input power and 8 MPPT High system efficiency with up to 88 % RTE and 97.6 % maximum converter efficiency Robust outdoor housing with IP54 rating, corrosion resistance class ≤ C5 and an operating temperature range of -20 °C to +50 °C Up to 10 systems can be operated in parallel in off-grid mode Technical performance and system configuration The Deye MS-GS215-2H3 delivers 100 kW AC power at 50/60 Hz and 380/400 Vac. The battery voltage ranges from 660 to 864 Vdc, whilst the system operating voltage ranges from DC 600 to 935 V in grid-connected mode and DC 700 to 935 V in off-grid mode. With a maximum AC output current of 167 A, a power factor of -1 to 1 and a THD of less than 3 %, the system is also suitable for demanding load profiles in commercial environments. On the PV side, the system supports a maximum PV access power of 200 kW, a maximum PV input power of 160 kW and 8 MPPT trackers. The MPPT voltage range is 180 to 750 V, and the full-load range is 450 to 750 V. This allows the system to be flexibly integrated into larger photovoltaic projects and precisely adapted to different string layouts. LCD display, ETH/4G communication, as well as CAN, RS485 and Ethernet are available for system monitoring. Protection functions such as DC Type II / AC Type II surge protection, Protection Class 1, and relevant grid and system certifications underline its suitability for professional C&I energy storage projects. Areas of application and scalability The MS-GS215-2H3 is designed for various application scenarios: as a grid-connected solar and storage solution, as an on-grid backup system, and as an off-grid system connected to generators and critical loads. This makes the system particularly suitable for manufacturing facilities, commercial properties, logistics sites, infrastructure projects and businesses seeking to reduce their energy costs whilst simultaneously improving security of supply. Commercial and industry with high self-consumption, peak loads or backup requirements PV projects in the C&I sector with a need for self-consumption optimisation and storage integration Locations with critical loads such as production lines, IT infrastructure or technical installations Off-grid and hybrid projects with generator connection and scalable system configuration FAQs on the Deye MS-GS215-2H3 Can the Deye MS-GS215-2H3 be operated both grid-connected and off-grid? Yes, the system supports both on-grid and off-grid operation. Typical application scenarios include grid-connected storage solutions, on-grid backup solutions, and off-grid systems with generator connection and power supply to critical loads. How much PV capacity can be combined with the system? The MS-GS215-2H3 supports up to 200 kW PV access power and 160 kW maximum PV input power. In addition, 8 MPPT trackers are available, enabling even larger and more complex PV layouts to be connected efficiently. Is the system suitable for outdoor use? Yes, the housing is rated to IP54 and designed for operating temperatures ranging from -20 °C to +50 °C. The maximum permissible operating altitude is 3000 m, furthermore, the system is designed to withstand corrosion up to class ≤ C5. What communication interfaces and monitoring functions are available? The system uses ETH/4G for system communication and offers CAN, RS485 and Ethernet at converter level. An LCD display provides local status indication and facilitates commissioning as well as ongoing monitoring. How scalable is the Deye MS-GS215-2H3? In off-grid operation, up to 10 systems can be operated in parallel. This makes the system suitable for scalable projects with growing energy requirements or for applications with higher demands on redundancy and security of supply.
Deye BOS-B160 PRO-A3 160.7 kWh battery storage system for industry and commercial use
The Deye BOS-B160 PRO-A3 is a highly efficient, three-phase high-voltage battery storage system that has been specially developed to meet the demanding requirements of the commercial and industrial (C&I) sectors. It replaces rigid and difficult-to-scale storage systems with a modular, turnkey cabinet solution, whilst offering intelligent functions to optimise commercial energy flow.With its well-designed architecture, the BOS-B system is not just a passive energy storage solution, but serves as a future-proof foundation for your company’s energy management (Industrial Storage Hub). It supports seamless integration with high-performance Deye hybrid inverters (such as the SUN-125K series) and ensures that your business retains maximum control over its energy costs at all times.Highlights at a glanceLarge-scale industrial capacity: Offers a generous 160.7 kWh of usable energy in a compact cabinet-based solution, based on long-lasting lithium iron phosphate (LiFePO4) technology.High-voltage efficiency: Connecting the modules in series ensures a high system voltage, which minimises conversion losses and enables extremely rapid energy delivery.Excellent cycle stability: With over 6,000 charge cycles, the system guarantees an extremely long service life and maximum investment security, even with daily, intensive use.Intelligent Master BMS: The integrated control system in the cabinet continuously monitors cell voltages, temperatures and currents, and ensures fully automatic cell balancing.Safety features: Multi-stage protection mechanisms, including automatic shutdown in the event of overcurrent, overvoltage or thermal irregularities, guarantee worry-free operation round the clock.Flexible scalability: Multiple cabinet units can be easily connected in parallel to flexibly adapt the total capacity to the growth of your business.Areas of applicationThe Deye BOS-B160 PRO-A3 is the perfect addition to commercial PV systems and industrial infrastructure:Peak shaving: Reduction in grid usage charges through the targeted absorption of expensive electricity peaks in the industrial production process.Optimisation of self-consumption: Efficient temporary storage of solar power generated during the day from large industrial roof panels, to ensure self-sufficient operation even in the evening and at night.Emergency power & backup systems: Reliable protection of critical loads (such as IT infrastructure, cooling systems or sensitive production lines) in the event of power cuts.Installation & Safety InstructionsInverter compatibility: The system is designed as a high-voltage storage solution and must be operated with compatible Deye three-phase high-voltage hybrid inverters.Installation & Environment: Due to the system’s heavy weight, the cabinet solution should be installed on a load-bearing, level surface and in a well-ventilated, temperature-controlled indoor environment.Installation by qualified personnel: Due to the high-voltage direct current (DC) operation and the industrial power ratings, installation, cabling and commissioning must be carried out exclusively by certified qualified electricians. FAQs on the BOS-B160 PRO-A3 Deye Can the capacity of 160.7 kWh be expanded at a later date?Yes. The system has a modular design. To increase the total capacity, several of these cabinet units can be connected in parallel, meaning that storage capacities in the megawatt range can also be achieved.Is the master control unit (BMS) already integrated into the cabinet?Yes. The system is supplied as a turnkey cabinet solution, in which both the individual battery modules and the central cluster control unit (high-voltage BMS) are integrated into the rack, ready for operation.What advantages does LiFePO4 technology offer in industrial applications?Maximum safety and durability. Unlike conventional lithium-ion batteries, lithium iron phosphate cells are extremely thermally stable, non-flammable and offer a significantly higher number of charge cycles, even under intensive use.Does the system support control via an external energy management system (EMS)?Yes. Via the integrated communication interfaces, the storage system can be seamlessly connected to higher-level commercial energy management systems (EMS) to implement complex charging and discharging strategies.
