XCELL

The XCELL XP1.26 is a compact and reliable 6-volt lead-acid battery with a capacity of 1.2 Ah. It impresses with its long service life, low self-discharge and flexible application possibilities in various applications where a constant power supply is required.Highlights at a glanceLong service life: Designed for a service life of up to 10 years at 20 °C.Compact design: At just 97 x 24 x 58 mm, ideal for space-critical applications.High reliability: Absorbent Glass Mat technology (AGM) ensures leak-proof and low-maintenance operation.Wide temperature range: Powerful in discharge operation from -15 °C to +50 °C.High safety: Robust ABS housing, UL and CE certified.Powerful for various areas of applicationThe XP1.26 is particularly suitable for applications requiring stable emergency power. Typical fields of application are security and alarm systems, lighting systems, telecommunications or small UPS systems. Thanks to its high discharge currents of up to 18 A for 5 seconds, it is also reliable during short-term peak loads.Efficiency through robust technologyWith a low self-discharge of only about 9% in three months (at 25 °C), the battery remains ready for use even after long idle periods. The temperature resistance allows flexible use in demanding environments. In addition, AGM technology ensures uniform performance and minimal maintenance.Compact dimensions and flexible installationThe XCELL XP1.26 weighs only 0.28 kg and is easy to integrate thanks to its small dimensions. The T1 connections ensure simple installation. Thanks to the robust design and the option of standby and cycle operation, the battery is versatile and impresses with consistent performance throughout its service life.Characteristics ModelXCELL XP1.2-6 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby)6.75V - 6.9V Charging voltage (cyclic use)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 24 x 57 Weight (kg)approx. 0.3 ConnectionSolder terminal CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP1.26How long does the battery last?The XP1.26 is designed for a service life of up to 10 years in standby mode at 20 °C.Which applications is the battery suitable for?The battery is ideal for security systems, emergency lighting, telecommunications systems, small UPS systems and other devices that require a reliable 6V power supply.Can the battery be installed in different positions?Yes, thanks to AGM technology, flexible installation is possible without impairing performance.How high is the self-discharge?At 25 °C, the self-discharge is approx. 9% in three months, 18% in six months and 35% after one year.Is the housing flame-retardant?Yes, the housing is made of ABS plastic and meets the UL94 V0 classification.What connections does the battery have?The battery is equipped with a 4.8 mm Faston terminal.Is the XP1.26 maintenance-free and leak-proof?Yes, thanks to AGM technology, the battery is maintenance-free, leak-proof and can be operated in any position.

The XCELL XP3.2-6 is a powerful and compact lead-acid battery that impresses with a capacity of 3.2 Ah at 6 V. It offers reliable power supply, long service life, and a robust construction that makes it ideal for professional use in safety-critical and industrial applications.Highlights at a glanceHigh capacity: 3.2 Ah with 20-hour discharge up to 5.25 V.Reliable technology: AGM technology for maintenance-free and leak-proof operation.Long service life: Up to 10 years standby operation at 20 °C.Compact design: Only 134 x 35 x 67 mm in size, weight 0.6 kg.High safety: Robust ABS housing (UL94 V0) with UL and CE certification.Stable and powerful for a wide range of applicationsWith a maximum discharge rate of 48 A (5 seconds), the XP3.2-6 is also perfectly suited for short-term peak loads. It is used in security and fire alarm systems, UPS systems, emergency lighting, telecommunications, and other applications that require a reliable 6V power source.Efficiency through robust technologyThe low self-discharge rate of around 9% in three months (at 25 °C) guarantees high availability even after extended storage. In addition, due to its temperature resistance from -15 °C to +50 °C in discharge operation, the battery remains flexible in use. The AGM technology ensures consistent performance with minimal maintenance.Compact dimensions and easy installationThanks to its slim design and Faston 4.8 mm terminals, the battery can be quickly and safely integrated. Weighing only 0.6 kg, it is easy to handle while providing a reliable energy solution with long service life.Characteristics ModelXCELL XP3.2-6 Battery typeVRLA AGM (standby / all-purpose) Nominal voltage (V)6 Capacity (Ah)3.2 (at 20h rate) Maximum discharge current48A (for 5 seconds) Charging voltage (floating charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 34 x 66 Weight (kg)approx. 0.64 TerminalFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP3.2-6How long is the service life of the battery?The XP3.2-6 is designed for a service life of up to 10 years in standby operation at 20 °C.In which applications is the battery used?It is particularly suitable for security installations, emergency lighting, telecommunications, UPS systems and other devices that require a stable 6V power supply.Is the battery maintenance-free?Yes, thanks to AGM technology, the battery is absolutely maintenance-free and leak-proof.How high is the self-discharge?The self-discharge is about 9% in three months at 25 °C, 18% in six months and 35% after one year.Is the case flame-retardant?Yes, the ABS housing complies with UL94 V0 classification for flame retardancy.What type of terminal does the battery have?The battery is equipped with a 4.8-mm Faston (blade) terminal. 

The XCELL XP56 is a reliable 6-volt lead-acid battery with a 5 Ah capacity, representing long-lasting performance, high safety, and a compact design. It is ideally suited for safety-critical applications where a constant power supply is required.Highlights at a glanceHigh capacity: Delivers 5 Ah with a 20-hour discharge to 5.25 V.Long service life: Up to 10 years standby operation at 20°C.High current capability: Maximum discharge current of 75 A for 5 seconds.Compact & lightweight: Dimensions 70 x 47 x 107 mm with a weight of only 0.8 kg.Safe & robust: Housing made from ABS plastic (UL94 V0), UL and CE certified.Reliable for a range of applicationsThe XP56 is a proven energy storage unit for security and alarm systems, emergency lighting, UPS systems, telecommunications, and many other devices with 6V power supply. Its high load capability makes it particularly suitable for applications with short-term peak loads.Technology that deliversThanks to Absorbent Glass Mat (AGM) technology, the battery is leak-proof, maintenance-free, and provides consistent performance. Its low self-discharge rate of approx. 9% in three months (at 25°C) ensures it remains reliably ready for use even after extended idle periods. Its operating temperature range of -15°C to +50°C in discharge mode also allows for flexible use in different environments.Compact design and simple installationWith T1 terminals (Faston 4.8 mm), the XP56 can be installed quickly and safely. Its slim dimensions make it especially suitable for devices and systems where space is at a premium. The robust construction ensures maximum operational safety.Specifications  ModelXCELL XP5-6 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)70 x 47 x 107 Weight (kg)approx. 0.81 TerminalFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  Frequently Asked Questions about the XCELL XP56How long is the battery’s service life?The XP56 offers a standby service life of up to 10 years at 20°C.What applications is the battery suitable for?The battery is ideal for security and fire alarm systems, emergency lighting, UPS systems, and telecommunications equipment.How high is the self-discharge?At 25°C, self-discharge is about 9% after three months, 18% after six months and 35% after a year.What terminals does the battery have?The XP56 is equipped with Faston 4.8 mm terminals (T1) which allow for easy and secure installation.What technology does the battery use and is it maintenance free?It is a sealed AGM (Absorbent Glass Mat) lead-acid battery with ABS housing. It is maintenance free, leak-proof and can be used in any installation position.What is the battery’s operating temperature range?The recommended temperature range for operation is –15 °C to +50 °C for discharging and –10 °C to +50 °C for charging; storage is possible from –20 °C to +50 °C. 

The XCELL XP76 is a powerful 6-volt lead-acid battery with a capacity of 7 Ah. It impresses with its long service life, high current carrying capacity and reliable AGM technology. This makes it the ideal solution for applications that require a reliable and constant power supply.Highlights at a glanceHigh capacity: 7 Ah with 20-hour discharge up to 5.25 V.Long service life: Designed for up to 10 years of standby operation at 20 °C.High load capacity: Delivers up to 105 A (5 seconds).Compact design: Dimensions 151 x 34 x 100 mm with 1.12 kg weight.Flexible connection: Available with T1 or T2 terminals.Safe & certified: Robust ABS housing (UL94 V0), UL and CE certified.Reliable performance for various applicationsThe XP76 is versatile and is particularly suitable for emergency and security lighting, UPS systems, alarm systems, telecommunications as well as medical and industrial devices. Thanks to its high current carrying capacity, it provides a stable power supply even during short-term peak loads.Robust technology for long operational readinessWith its AGM technology, the battery is absolutely maintenance-free and leak-proof. The low self-discharge (approx. 9 % in three months at 25 °C) ensures reliable operational readiness even after longer periods of storage. In addition, the XP76 remains powerful in a wide temperature range from -15 °C to +50 °C in discharge operation.Compact dimensions and easy integrationThanks to its slim design and practical T1/T2 connections, the battery can be easily integrated into existing systems. With only 1.12 kg, it is easy to handle and impresses with its robust construction, which guarantees maximum operational safety.Features  ModelXCELL XP7-6 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 34 x 100 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP76How long is the service life of the battery?The XP76 is designed for up to 10 years of standby operation at 20 °C.For which applications is the battery suitable?Typical areas of application include telecommunications, hazard alarm systems, UPS systems, security technology and applications in medical and railway technology.Is the battery maintenance-free?Yes, the AGM technology makes the battery maintenance-free and leak-proof.How high is the self-discharge?The self-discharge rate is approx. 9 % after three months, 18 % after six months and 35 % after twelve months (at 25 °C).Which connection variants are available?The XP76 is available with either T1 or T2 terminals to allow flexible installation.What is the nominal voltage and capacity of the XCELL XP76?The battery has a nominal voltage of 6 volts and a capacity of 7 Ah.In which temperature range can the battery be used?The recommended operating temperature range is between −15 °C and +50 °C.What are the housing and safety features of the battery?It uses a robust ABS housing, is UL and CE certified, and specified for floating applications at about 20 °C.

The XCELL XP0.812 is a compact 12-volt lead-acid battery with a capacity of 0.8 Ah that impresses with its reliable performance, robust design and maintenance-free AGM technology. It is ideal for applications where space is limited but a stable power supply is required.Highlights at a glanceCompact design: Dimensions of only 96 x 25 x 62 mm with a weight of 0.33 kg.Reliable power: 0.8 Ah capacity with 20-hour discharge up to 10.5 V.Long service life: Up to 10 years in standby mode at 20 °C.High level of safety: Robust ABS housing, UL and CE certified.Maintenance free: AGM technology ensures leak-proof operation.Versatile in useThe XP0.812 is used in security and alarm technology, emergency lighting, measuring devices, telecommunications and many other compact applications. With a maximum discharge current of 5 A (5 seconds), it offers a stable power supply even during short-term load peaks.Efficiency and durabilityThanks to its low self-discharge (approx. 9 % in three months at 25 °C), the battery remains reliably ready for use even when stored for long periods. The temperature resistance of -15 °C to +50 °C in discharge mode enables flexible use in a wide range of environments.Compact dimensions for easy integrationWith its slim design and plug connections, the XP0.812 can be quickly and easily integrated into existing systems. It offers a robust and durable solution for all applications where compact size and operational reliability are crucial.Features  ModelXCELL XP0.8-12 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)0.8 (at 20h rate) Maximum discharge current12A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Battery lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)96 x 25 x 62 Weight (kg)approx. 0.35 ConnectionAMP connector CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP0.812How long does the XP0.812 battery last?The XP0.812 is designed for a service life of up to 10 years in standby mode at 20 °C.In which areas is it used?Typical applications include security systems, emergency lighting, telecommunications, measuring devices and other compact devices with a 12V power supply.Is the battery maintenance-free?Yes, the AGM technology makes it completely maintenance-free and leak-proof.How high is the self-discharge rate?Self-discharge is approx. 9 % after three months, 18 % after six months and 35 % after one year at 25 °C.In which temperature range can the battery be used?The battery can be used in a temperature range from -20 °C to +50 °C. 

The XCELL XP0.812JST is a particularly compact 12-volt AGM lead-acid battery with a nominal capacity of 0.8 Ah. Thanks to the pre-assembled JST plug connection, it can be quickly integrated into devices with limited installation space and provides a reliable, maintenance-free power supply in continuous and cyclical operation.Highlights at a glanceSpace-saving and lightweight: 96 x 25 x 62 mm at only 0.33 kgReady for connection: integrated JST connector with stranded wiresReliable capacity: 0.8 Ah at 20 h up to 10.5 VLong service life: Designed for up to 10 years in standby mode at 20 °CSafety and quality: AGM technology, ABS housing, UL and CE, ISO 9001Power for compact applicationsWhether emergency lighting, safety and signalling technology, measuring devices or small controllers. The XP0.812JST delivers a stable 12 V and can withstand short-term discharge currents of up to 5 A for 5 seconds. The internal impedance of approx. 200 mΩ (fully charged, 25 °C) supports consistent power delivery.Availability even after storage periodsAt 25 °C, self-discharge is approx. 9 per cent after 3 months, approx. 18 per cent after 6 months and approx. 35 per cent residual capacity loss after 12 months. This means the battery remains ready for use even after storage phases. The permissible temperature range during discharge operation extends from −15 °C to +50 °C.Installation and charging technologyThe battery is connected via the pre-assembled JST plug connector and can be mounted immediately. For standby operation, a final charging voltage of 13.60 to 13.80 V at 25 °C is recommended, with temperature compensation of −18 mV per °C. In cycle operation, the charging parameters are 14.50 to 14.90 V at 25 °C, compensation −30 mV per °C. The maximum charging current is 0.24 A.Features  ModelXCELL XP0.8-12JST Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)0.8 (at 20h rate) Maximum discharge current12A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)96 x 25 x 62 Weight (kg)approx. 0.35 ConnectionJST connector CertificationsISO9001, CE, UL  FAQs about XCELL batteries with JST connectorHow long is the expected service life of the XP0.812JST on standby?At 20 °C, the battery is designed for up to 10 years in float operation.Is the XP0.812JST battery suitable for cyclical applications?Yes, use the cycle charging voltage of 14.50 to 14.90 V at 25 °C and observe the maximum charging current of 0.24 A.What is special about the JST version?The battery has a pre-assembled JST connector with wires. This enables quick, reverse polarity-proof integration into suitable devices and cable harnesses.What temperatures are permissible during operation?Discharge is possible between -15 °C and +50 °C. The battery should be charged at temperatures from -10 °C to +50 °C. For longer storage, temperatures from -20 °C to +50 °C are permissible.How high is the self-discharge?At 25 °C, approx. 91 per cent of the capacity remains after 3 months, approx. 82 per cent after 6 months and approx. 65 per cent after 12 months. Regular recharging in float operation is recommended. 

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The XCELL XP2.3-12 is a slim 12-volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides a reliable power supply for safety-critical and industrial applications and, with VdS G 115071 certification, meets the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS approved: G 115071 for safety-related applicationsPower reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm, weighing approx. 0.9 kgMaintenance-free: Valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security technology, emergency lighting, fire alarm systems, communication and measuring equipment, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) ensures a stable power supply, even during brief load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C is recommended, with temperature compensation of minus 18 mV per °C. In cyclic operation, the final charging voltages range from 14.50 to 14.90 V at 25 °C, with compensation of minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, from minus 10 °C to plus 50 °C during charging, and from minus 20 °C to plus 50 °C for storage.Dimensions and connectionsThe T1 copper flat plug connectors enable quick integration into existing systems. Thanks to its compact, elongated design, the battery fits particularly well in narrow enclosures and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20-hour rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4,8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP2.3-12What is the expected service life of the XP2.3-12 in standby mode?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years of float operation. Regular testing cycles and the correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety systems such as fire alarm and intruder alarm systems, emergency lighting, communication and measuring equipment, as well as control systems with a 12-volt supply.What charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please note the relevant temperature compensation.What is the self-discharge rate?At 25 °C, approximately 91 per cent of capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.What connections are available on the XP2.3-12?The XP2.3-12 features T1 copper flat plug connectors for quick and secure installation. 

The XCELL XP3.4-12 is a compact 12-volt AGM lead-acid battery with a rated capacity of 3.4 Ah. It delivers stable performance in safety-critical and industrial applications and can be quickly integrated thanks to T1 flat plug terminals. VdS approval and ISO 9001-certified manufacturing underline its suitability for professional use.Highlights at a glance3.4 Ah during a 20-hour discharge up to 10.5 VVdS approved: G 125002 for safety-related applicationsLow internal resistance of approx. 45 mΩ for reliable current deliverySlim design: 134 x 67 x 66.5 mm, weighing approx. 1.20 kgMaintenance-free thanks to VRLA-AGM and robust ABS casingPerformance for demanding applicationsThe XP3.4-12 ensures a reliable 12 V power supply for fire and burglar alarm systems, emergency and safety lighting, control and regulation technology, as well as measurement and communication devices. Even short-term load peaks are absorbed smoothly.Efficiency and service lifeThe usable capacity is maintained across a wide temperature range: at 40 °C it is 103 per cent, at 25 °C 100 per cent and at 0 °C still 86 per cent. VRLA-AGM technology ensures minimal maintenance and consistent performance throughout the entire service life.Technology and installationT1 flat-pin connectors enable fast, reverse-polarity-protected integration. In standby mode, a charging voltage of 13.5 to 13.8 V at 25 °C is recommended, with temperature compensation of minus 20 mV per °C. In cyclic operation, 14.4 to 15.0 V at 25 °C with minus 30 mV per °C. The initial charging current in cyclic operation should be less than 1.02 A.Properties  ModelXCELL XP3.4-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)3.4 (at 20-hour rate) Maximum discharge current51A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP3.4-12What is the XP3.4-12 battery particularly suitable for?For safety systems such as fire and smoke detection systems, emergency and safety lighting, control systems, communication and measuring equipment, as well as other 12-volt systems with moderate to medium loads.What charging voltages must be observed?In standby mode, the voltage at 25 °C is 13.5 to 13.8 V. In cyclic operation, it is between 14.4 and 15.0 V. Please note the respective temperature compensation.What connections are available on the XP3.4-12?T1 flat plug connectors for quick, reverse-polarity-protected installation in existing cable harnesses.Is the battery maintenance-free?VRLA-AGM technology enables leak-proof, low-gassing and virtually maintenance-free operation.Are there different versions with and without VdS approval?Yes, in addition to the VdS version with the designation G 125002, retailers also offer the standard variant without VdS approval, which should be taken into account when selecting a product.How does temperature affect capacitance?The capacity is temperature-dependent and amounts to approximately 103 per cent at 40 degrees Celsius, 100 per cent at 25 degrees Celsius and 86 per cent of the nominal value at 0 degrees Celsius. 

The XCELL XP7-12 is a valve-regulated AGM battery with 12 volts and a rated capacity of 7 Ah (C20). It impresses with its compact dimensions, high operational reliability and long service life. Thanks to its robust construction and low self-discharge, it is ideally suited for use in security and emergency power systems, medical technology, measurement and control technology, telecommunications, and in numerous mobile and stationary applications.Highlights at a glanceCompact power: 12 V, 7.0 Ah (20h)VdS approved: G 120023 for safety-related applicationsFlexible usage: Any operating position is possible (except permanently upside down)Long-lasting: Up to 5 years design life at 20 °CHigh reliability: Low self-discharge <3 % per month at 25 °CRobust housing: ABS UL94 HBReliable power supply for a wide range of applicationsXCELL ’s XP7-12 delivers consistent performance even under demanding conditions. AGM technology ensures efficient gas recombination, making the battery virtually maintenance-free. With a maximum discharge current capacity of 105 A (5 seconds), it is also suitable for applications with short-term peak loads.Efficiency meets durabilityIn standby mode, the battery should be charged to a voltage of 2.25–2.30 V/cell. For cyclic operation, a charging voltage of 2.45–2.50 V/cell is recommended. The temperature compensation is –3 mV/cell/°C in standby mode and –4 mV/cell/°C in cyclic operation. The recommended maximum current is 0.3C (approx. 2.1 A). In cyclic use, the battery achieves several hundred charge and discharge cycles, depending on the depth of discharge.Technology for flexible applicationsThe operating temperature range of the cells is between –15 °C and +50 °C during charging. During discharge, it is –20 °C to +60 °C, and during storage –20 °C to +50 °C. T1 or T2 plug-in connectors are available for the electrical connection. The recommended tightening torque for this is between 2 and 3 Newton metres. Each cell is also equipped with a safety valve, which further enhances operational safety.Features  ModelXCELL XP7-12 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20-hour rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  FAQ on the XCELL XP7-12 industrial batteryFor which applications is the XP7-12 ideally suited?The XCELL XP7-12 is ideal for emergency power supply, security and fire alarm systems, medical technology, telecommunications, measurement and control technology, as well as mobile devices with cyclic energy requirements.How cycle-stable is the XP7-12?At a 30% depth of discharge, the battery achieves over 1,000 charge and discharge cycles. At higher depths of discharge, the service life is reduced accordingly, but remains in the range of several hundred cycles.What are the specific safety features?The battery is equipped with pressure relief valves. Like all VRLA batteries, it may release small amounts of hydrogen. It should therefore not be operated in airtight enclosures and adequate ventilation must be ensured.Which chargers are suitable for the XP7-12?Constant-voltage chargers designed for VRLA AGM batteries are recommended. Correct setting of the charging voltage and temperature compensation is crucial for a long service life.How is the battery installed?The battery can be installed in any position except permanently upside down. Connection is via T1 or T2 plug-in terminals with a tightening torque of 2–3 Nm. 

The XCELL XP7/12F2 impresses as a reliable 12-volt lead-acid battery with 7.2 Ah (20-hour rate) capacity, robust AGM technology and compact dimensions. Equipped with Faston terminals, this battery is ideal for security and emergency power systems, telecommunications and mobile devices. With a service life of up to 10 years in standby mode, it offers a stable power supply with minimal maintenance.Highlights at a glanceRobust capacity: 7.2 Ah at a 20-hour discharge rate for a wide range of applicationsVdS approved: G 116061 for safety-related applicationsLong service life: Up to 10 years standby service life at 20 °CHigh discharge reserves: Maximum discharge currents of up to 108 A for 5 secondsTemperature-resistant: Powerful from -15 °C to +50 °CCompact design: Only 151 x 65 x 100 mm at approx. 2.26 kgStrong performance for demanding applicationsThe XCELL XP7/12F2 is the ideal solution for applications that require a compact design combined with high energy density. Typical areas of application include uninterruptible power supplies (UPS), safety-relevant lighting systems, medical devices, alarm systems and other industrial applications. Thanks to its absorbent glass mat technology, the battery offers reliable performance even during short-term load peaks.Efficient energy for continuous operationThis battery is characterised by a low self-discharge of only around 9 % in 3 months at 25 °C, which means it is quickly ready for use even after longer periods of storage. Its charging characteristics support both standby mode with a recommended voltage of 13.60 to 13.80 V and cyclic use with 14.50 to 14.90 V. With a recommended max. charging current of 2.16 A, the battery remains safe and efficient in operation.Reliable technology for the highest demandsAGM technology ensures leak-proof, maintenance-free operation with an internal gas recovery system. The XCELL XP7/12F2 can be installed in any position (except upside down) and reliably withstands temperatures between -15 °C and +50 °C during discharge operation. Its high cycle resistance and UL and CE certifications underline its suitability for demanding industrial environments.Features  ModelXCELL XP7-12F2 Battery typeVRLA AGM (Standby / General purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, CE, UL  FAQs about the XCELL XP7/12F2 lead-acid batteryHow long is the battery service life?The XCELL XP7/12F2 is designed for a service life of up to 10 years in standby mode at 20 °C.What is the battery particularly suitable for?It is ideal for applications such as UPS systems, emergency lighting, medical devices, telecommunications systems and mobile electronic devices.Can the battery also be used at low temperatures?Yes, the battery works reliably in a discharge temperature range from -15 °C to +50 °C.Does the battery need regular maintenance?No, the battery is maintenance-free thanks to its sealed, valve-regulated AGM design.What charging parameters need to be observed?A charging voltage of 13.60 – 13.80 V is recommended for standby mode, and 14.50 – 14.90 V for cyclic operation. The maximum charging current should not exceed 2.16 A. 

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and a capacity of 12 Ah. With 6.3 mm Faston plug-in terminals, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems, and medical and industrial equipment. Its leak-proof AGM technology ensures a maintenance-free and long-lasting power supply.Highlights at a glanceVdS approved: G 120034 for safety-related applicationsCompact design: Measuring just 151 x 98 x 95 mm and weighing approx. 4.1 kgReliable performance: 12 Ah capacity at a 20-hour discharge rateHigh discharge current: Up to 180 A (5 sec.) for peak loadsLong-lasting: Up to 5 years’ service life at 25 °C in standby modePowerful performance for demanding applicationsThanks to its robust construction and consistent current output, the XP12-12F2 is suitable for a wide range of applications: from safety-critical systems and telecommunications to medical equipment. The Faston connectors (6.3 mm) enable seamless integration into existing setups. Even during short-term load peaks, the battery reliably delivers power with a discharge current of up to 180 A for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float life of up to 5 years (at 25 °C), the battery is characterised by low self-discharge of less than 3% per month, meaning it is ready for immediate use even after prolonged storage. It also impresses with good performance at extreme temperatures ranging from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (in accordance with UL94-HB/UL94-V0) and complies with international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage is 2.25 – 2.30 V/cell (equivalent to 13.5 – 13.8 V) in standby mode and 2.45 – 2.50 V/cell (equivalent to 14.7 – 15.0 V) in cycle mode at an ambient temperature of 25 °C. Automatic temperature compensation of –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby mode?Under ideal conditions (25 °C ambient temperature), the expected service life in standby mode is up to 5 years.Is the battery VdS-certified?Yes, the battery has VdS approval with the number G120034 and is therefore suitable for safety-critical applications.What temperature range is the battery suitable for?The battery is designed for a charging range of –15 °C to +50 °C and a discharging range of –20 °C to +60 °C.What is the self-discharge rate?At 25 °C, the battery’s self-discharge rate is less than 3 % per month. It is recommended that the battery be recharged if it has been stored for longer than six months.What charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cyclic operation, it should be 14.7–15.0 V. The temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cyclic operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard warning systems, as well as for hobby and camping use. However, it is not suitable for starting or traction applications.

The XCELL XP18-12 is a high-performance, maintenance-free lead-acid battery renowned for its reliability and longevity. Based on proven AGM (Absorbent Glass Mat) technology, this battery offers a nominal voltage of 12 V and a capacity of 18 Ah. It has been specially developed for demanding stationary and cyclic applications where a constant and reliable power supply is crucial. Thanks to its sealed VRLA design, it is leak-proof and can be operated in any position.Highlights at a glanceReliable performance: 18 Ah capacity at 12 V, which corresponds to a total energy of 216 Wh.Long-lasting: Designed for a service life of up to 5 years in accordance with the Eurobat classification.Maintenance-free: VRLA AGM technology eliminates the need for topping up with water.Safe and flexible: Fully sealed, leak-proof and suitable for installation in any orientation.Low self-discharge: Ideal for standby operation and seasonal use.VdS approved: G 115072 for safety-related applicationsReliable power for critical applicationsThe XCELL XP18-12 is the ideal power solution for systems where reliability is paramount. With its standard dimensions of 181 x 77 x 167 mm and a weight of approximately 5.4 kg, it can be easily integrated as a replacement for existing batteries in a wide range of devices. Its primary applications include uninterruptible power supplies (UPS), security and alarm systems, emergency lighting systems, and applications in medical and rehabilitation technology. The wide operating temperature range ensures stable performance even under demanding environmental conditions.Efficiency and safety thanks to AGM technologyThe AGM technology of the XCELL XP18-12 binds the electrolyte within a glass fibre mat. This design not only prevents acid leakage but also ensures high vibration resistance and excellent cycle stability compared to conventional lead-acid batteries. As no gassing occurs during normal operation, the battery can be used safely indoors and in enclosures without special ventilation. This maximises user safety and reduces maintenance requirements to a minimum.Proven and robust lead-acid AGM technologyUnlike open lead-acid batteries, the XP18-12 is valve-regulated and sealed thanks to its VRLA (Valve Regulated Lead Acid) design. This enables internal gas recombination and ensures consistently high performance throughout the entire service life. The lead-calcium grid plates used contribute to a very low self-discharge rate, making the battery ideal for standby operation or for applications with prolonged periods of inactivity.Features  ModelXCELL XP18-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)18 (at a 20-hour rate) Maximum discharge current270A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP18-12 lead-acid batteryWhat does the term AGM mean?AGM stands for "Absorbent Glass Mat". In this technology, the battery electrolyte is bound within a glass fibre mat. This makes the battery leak-proof, maintenance-free and highly resistant to vibrations.What applications is the XP18-12 battery suitable for?The battery is ideal for uninterruptible power supplies (UPS), alarm systems, fire alarm control panels, emergency lighting systems, as well as for medical and rehabilitation equipment such as patient lifts or electric wheelchairs.What is the expected service life of the battery?The XCELL XP18-12 is designed for a service life of up to 5 years in standby mode in accordance with the Eurobat classification. The actual service life depends heavily on the application, operating temperature and depth of discharge.Can multiple XP18-12 batteries be connected together?Yes, you can connect several batteries of this type together. For a higher voltage (e.g. 24 V), connect two batteries in series. For a higher capacity, connect the batteries in parallel. Please only use batteries of the same type, age and charge level for this purpose.Is the battery truly maintenance-free?Yes, thanks to its sealed VRLA AGM design, the battery is completely maintenance-free. No top-up of distilled water is required throughout its entire service life.How should the battery be stored when not in use?Please store the battery in a cool, dry place and ensure it is fully charged. Due to the low rate of self-discharge, the charge level should be checked every six months and the battery recharged if necessary to prevent deep discharge. 

The XCELL XP26-12 is a powerful, maintenance-free 12-volt lead-acid battery with a capacity of 26 Ah (20-hour rate), characterised by its long service life. It has been specially developed for reliable, safety-critical and industrial applications. Thanks to its robust AGM technology and M5 inlay terminals, it delivers a high current output. The battery is also VdS-certified (G115073).Highlights at a glanceVdS approved: G 115073 for safety-related applicationsPowerful performance: 26 Ah capacity at a 20-hour discharge rateHigh current output: Up to 390 A discharge current (5 seconds)Long-lasting: Up to 5 years’ service life in standby mode at 25 °CMaintenance-free: Leak-proof AGM technology (VRLA)Powerful performance for demanding applicationsThe XP26-12 ensures a constant and reliable power supply, even during short-term load peaks, with a discharge current of up to 390 A for 5 seconds. With its compact dimensions (165 × 176 × 127 mm) and low weight of approx. 7.9 kg, it is ideal for mobile devices, emergency power supply systems, telecommunications, safety lighting and other industrial applications.Efficient and long-lasting power supplyAGM technology ensures maintenance-free operation with minimal self-discharge of less than 3% per month at 25 °C. A voltage of 13.60–13.80 V is recommended for continuous operation (float charging), whilst 14.50–14.90 V is ideal for cyclic operation. Integrated temperature compensation ensures the efficiency of the charging power regardless of the ambient temperature. The maximum charging power is 7.8 A.Technology for reliable safetyThe battery is fitted with a flame-retardant casing in accordance with UL94-HB/V0 and complies with international standards such as CE, UL and ISO 9001. The design allows for safe operation over several years in standby mode, provided proper maintenance is carried out and ambient temperature conditions are met. Even under difficult conditions, the battery maintains a stable capacity output, approximately 85% at 0 °C and 65% at –15 °C.Features  ModelXCELL XP26-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)26 (at a 20-hour rate) Maximum discharge current390A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP26-12What is the service life of the XCELL XP26-12 battery?Depending on operating conditions, the float service life is 3 to 5 years at an ambient temperature of 25 °C.What is the XCELL XP26-12 suitable for?The battery is suitable for safety-critical systems (e.g. fire and burglar alarm systems), UPS systems, telecommunications equipment, medical technology and other industrial applications.Is the XCELL XP26-12 battery VdS-certified?Yes, the XCELL XP26-12 holds VdS approval with the number G115073.What is the self-discharge rate?Self-discharge is less than 3% per month at 25 °C.What charging parameters should be observed?A voltage of 13.60 to 13.80 V is recommended for standby operation. In cyclic operation, the voltage is 14.50 to 14.90 V. The maximum charging current should not exceed 7.8 A.Is the battery maintenance-free, leak-proof and usable in any position?Yes, the XP 26‑12 VDS is maintenance-free, sealed, leak-proof and can be operated in any position. 

The XCELL XP45-12 is a robust lead-acid battery with a nominal voltage of 12 volts and a capacity of 45 Ah (20-hour rate). Thanks to maintenance-free AGM technology, M6 inlay terminals and VdS certification (G115059), this battery is ideal for safety-critical and industrial applications. It impresses with its high discharge capacity, long service life and reliable performance even under demanding conditions.Highlights at a glanceVdS approved: G 115059 for safety-related applicationsHigh capacity: 45 Ah at a 20-hour discharge rate, 27.9 Ah at a 1-hour loadHigh discharge currents: Up to 450 A possible for 5 secondsLong-lasting: Up to 12 years of float life at 25 °CMaintenance-free: AGM technology with leak-proof designReliable: Low self-discharge (< 3%/month)Reliable performance for demanding industrial applicationsThe XP45-12 is characterised by its robust construction and high current output, making it the ideal choice for a wide range of demanding applications. These include uninterruptible power supply (UPS) systems, emergency lighting, telecommunications equipment and medical technology, as well as other industrial applications. Thanks to its M6 connectors (T4/T9), a stable and reliable connection is guaranteed. Even during brief peak loads, the battery reliably delivers up to 450 A of current, underlining its high performance and reliability.Energy efficiency and extended lifespanThe batteries offer a float life of up to 12 years at 25 °C, making them ideal for long-term use in stationary systems. The recommended charging voltage is 13.50–13.80 V in standby mode and 14.50–14.90 V in cyclic operation. The maximum charging current is limited to 13.5 A. Thanks to the temperature-compensated charging characteristics, energy efficiency is maintained even under fluctuating environmental conditions.Technology for maximum operational reliabilityThe flame-retardant ABS housing meets UL94-HB/V0 standards and provides reliable cell protection. Certifications to UL, CE, ISO 9001 and VdS confirm the product’s high manufacturing quality and safety. Self-discharge is less than 3% per month, ensuring reliable operational readiness even during prolonged storage periods.Features  ModelXCELL XP45-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)45 (at a 20-hour rate) Maximum discharge current450A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)approx. 14.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP45-12 lead-acid batteryWhat is the battery’s service life?Under optimal environmental conditions (25 °C), the XP45-12 has a service life of up to 12 years in float mode.Is the battery VdS-certified?Yes, the VdS approval with the number G115059 confirms its suitability for safety-critical applications such as fire and burglar alarm systems.What temperature range is the XP45-12 battery designed to withstand?The XP45-12 battery is designed for discharge at –15 °C to +50 °C and charging at –10 °C to +50 °C.What is the self-discharge rate?At 25 °C, self-discharge is less than 3% per month; recharging is recommended after 6 months at the latest.What charging parameters apply?For standby operation: 13.50 – 13.80 V.For cyclic operation: 14.50 – 14.90 V.Temperature compensation: –18 mV/°C (float), –30 mV/°C (cycle).Max. charging current: 13.5 A.What is the cycle life of the XP45-12 battery?The XP45-12 battery can withstand up to 400 charge cycles at a 50% discharge rate. 

The XCELL XP65-12 is a high-performance lead-acid battery with a nominal voltage of 12 V and a capacity of 65 Ah (20 h rate), ideal for safety-critical applications and demanding industrial environments. Equipped with M6 inlay terminals and tested to VdS G118049, it impresses with high discharge currents, a long service life and reliable performance, even under difficult environmental conditions.Highlights at a glanceVdS approved: G 118049 for safety-related applicationsHigh capacity: 65 Ah at a 20-hour discharge rate, 37.7 Ah at a 1-hour discharge rateHigh-performance: Discharge current up to 780 A for 5 secondsLong-lasting: Up to 10 years float life at 20 °CMaintenance-free: AGM technology with leak-proof designHigh performance for industrial and safety-critical applicationsThanks to its reliable AGM technology and high current output, the XP65-12 is ideal for fire and burglar alarm systems, emergency power systems, telecommunications, medical technology and many other industrial applications. The M6 terminals ensure a secure connection, even under high load. With its compact dimensions (348 × 167 × 178 mm), it offers high energy density and can be easily integrated into existing systems.High levels of efficiency and service lifeIn float mode, the battery has a service life of up to 10 years at 20 °C. The charging voltage is 13.5–13.8 V in standby mode and 14.4–15.0 V in cyclic operation. The maximum charging current is 19.5 A. Thanks to the temperature-compensated charging curve, safe and efficient energy absorption is guaranteed even with temperature fluctuations. The low self-discharge rate allows for storage periods of up to 6 months without recharging at 25 °C.Technology for maximum reliabilityThe standard ABS housing is robust and can optionally be supplied in a flame-retardant (UL94-V0) version. A low internal resistance of approx. 7.3 mΩ ensures low losses and high system efficiency. The battery retains 86% of its capacity even at 0 °C and 65% at –15 °C. The product complies with international quality standards such as ISO 9001 and CE.Features  ModelXCELL XP65-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)65 (at 20-hour rate) Maximum discharge current650A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)approx. 21.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP65-12 lead-acid batteryWhat is the battery’s service life?In standby mode, the battery life is up to 10 years under optimal conditions (20 °C ambient temperature).What applications is the battery suitable for?The XP65-12 is ideal for safety-critical systems, such as fire and burglar alarm systems, UPS systems, medical equipment and industrial energy storage solutions.What temperatures can the battery withstand during use?The battery can be operated within a temperature range of –15 °C to +50 °C. The storage temperature range is –15 °C to +40 °C.What is the self-discharge rate of the XP65-12?At 25 °C, self-discharge is less than 3% per month. A top-up charge is recommended after six months at the latest.What charging parameters should be observed?Standby mode: 13.5 – 13.8 VCycle operation: 14.4 – 15.0 VMax. charging current: 19.5 ATemperature compensation: –20 mV/°C (float), –30 mV/°C (cycle)Are there any guidelines regarding storage and self-discharge?The battery can be stored for up to 6 months at 25 °C; after this, a top-up charge is recommended. 

The XCELL XPL80-12 is a reliable and long-lasting AGM lead-acid battery. With a nominal voltage of 12 V and a capacity of 80 Ah, it is designed for a design life of up to 12 years thanks to its long-life technology. It is ideal for UPS systems, emergency power supplies, safety lighting, as well as demanding industrial applications. Its robust construction, maintenance-free VRLA technology and high power reserves make it a safe and long-lasting energy source.Highlights at a glanceLong-lasting: Design life of 10 to 12 yearsHigh capacity: 80 Ah at 12 V for reliable power supplyMaintenance-free: AGM technology with valve-regulated closureReliable: Low self-discharge, easy chargingCompact: Space-saving with M6 terminals for flexible integrationPowerful performance for critical applicationsThe XPL80-12 is specially designed for use in safety-critical energy systems. Whether in UPS systems, emergency power systems or safety lighting, the battery always delivers stable performance. Its robust construction also ensures reliable power supply in industrial environments, even under high loads.Efficient energy and long service lifeWith a design life of up to 12 years, the XPL80-12 belongs to the long-life range from XCELL. The AGM technology ensures a sealed, maintenance-free design, while the low self-discharge guarantees reliable readiness for use even after long periods of storage. As the battery is not classified as hazardous goods, transportation is simple and safe.Characteristics  ModelXCELL XPL80-12 Battery typeVRLA AGM (Long Life / Standby) Nominal voltage (V)12 Capacity (Ah)80 (at 20h rate) Maximum discharge current800A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life10-12 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)260 x 168 x 214 Weight (kg)approx. 24.5 ConnectionM6 screw terminal CertificationsISO9001, CE, UL  FAQs about the XCELL XPL80-12 Long Life batteryHow long is the service life of the XPL80-12?The battery is designed for a design life of 10 to 12 years and is therefore suitable for long-term standby operation.For which applications is the battery particularly suitable?The XPL80-12 is ideal for UPS systems, emergency power systems, safety lighting, as well as for industrial applications requiring high reliability.Does the battery need to be serviced regularly?No, the XPL80-12 is completely maintenance-free thanks to AGM VRLA technology.Is the battery easy to transport?Yes, the battery is not classified as hazardous goods and can therefore be transported without problems.What is the nominal voltage and capacity of the XCell XPL8012?The battery has a nominal voltage of 12 V and a capacity of 80 Ah (C10 rate).