XCELL XP0.812JST lead-acid battery with JST connector – 12 V and 0.8 Ah

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. Featuring maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclic use, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for a long-lasting power supply.VdS approved: G 189170 for safety-related applicationsMaintenance-free: Leak-proof AGM technology with > 99% gas recombination.High current-carrying capacity: Up to 360 A discharge current for 1 second.Flexible installation: Operation in all positions (except permanently upside down).Long-lasting: EUROBAT class “Standard Commercial” with a service life of up to 5 years.High performance for safety-critical applicationsThe NP12-12 delivers 12 Ah during a 20-hour discharge (down to 1.75 V/cell) and 11.1 Ah during a 10-hour discharge (down to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited to short-term power peaks.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, the NP12-12 is completely maintenance-free and leak-proof. The battery features self-closing low-pressure relief valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ in accordance with EN IEC 60896-21, and the short-circuit current is 320 A. The low self-discharge rate of approx. 3% per month allows for long-term storage whilst maintaining a high state of readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa NP12-12 lead-acid batteryWhat applications is the NP12-12 suitable for?The battery is ideal for:VdS-compliant fire and intruder alarm systemsUninterruptible power supplies (UPS)Emergency lightingTelecommunicationsControl and regulation technologyMedical technology devicesIs the battery maintenance-free?Yes, thanks to AGM technology, the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all positions, with the exception of a permanently upside-down mounted position.Which charging parameters (float vs cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charging limit: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarging: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3% per month at 20 °C

The Yuasa NP24-12I VdS is an industrial, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 V and a capacity of 24 Ah. With leak-proof AGM technology, high current-carrying capacity and VdS approval, this maintenance-free battery is a reliable power source for safety-critical applications such as fire alarm systems, UPS systems or telecommunications systems.Highlights at a glanceReliable capacity: 24 Ah (20h) / 22.3 Ah (10h) at 12 V for a constant power supplyVdS approved: G 182026 for safety-related applicationsHigh peak load: Maximum discharge current up to 500 A for 1 secondMaintenance-free: AGM technology with > 99% gas recombinationFlexible installation: Internal threaded or bolt connections (M5) with a tightening torque of 2.45 NmHigh-performance solution for critical systemsWith a nominal capacity of 24 Ah (20-hour discharge to 1.75 V/cell) and 22.3 Ah (10-hour discharge to 1.8 V/cell), the NP24-12I delivers a reliable and stable power supply – even during sudden load peaks of up to 500 A. Ideal for emergency power supplies, security technology and communication systems where reliability is of the utmost importance.Robust technology with high operational reliabilityThe maintenance-free AGM (Absorbent Glass Mat) technology completely binds the electrolyte within the separator, meaning there is no free electrolyte present. With gas recombination of over 99% and self-closing safety valves, the battery is safe in operation and requires no topping up. The low self-discharge rate of approx. 3% per month makes it particularly suitable for long-term storage. The housing, made of robust ABS plastic, complies with the UL94:HB standard; a flame-retardant version in accordance with UL94:V0 is available upon request.Features  ModelYuasa NP24-12I VdS Battery typeVRLA AGM (cycle-resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)24 (at a 20-hour rate) Maximum discharge current240A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)175 x 166 x 125 Weight (kg)8.6 ConnectionM5 thread CertificationsIEC 60896-21+22, UL, VdS  FAQs on the Yuasa 12V 24Ah lead-acid batteryWhat applications is the NP24-12I suitable for?It is ideal for fire alarm systems, UPS systems, emergency lighting, telecommunications, security technology and PV backup systems.What is the typical service life in standby mode?The NP24-12I offers a service life of up to 5 years at 20 °C and is classified as ‘Standard Commercial’ according to EUROBAT.What type of connection is used?Internal threads or bolt connections (M5) with a tightening torque of 2.45 Nm ensure a secure and vibration-resistant connection.Is the battery truly maintenance-free and leak-proof?Yes. VRLA technology with gas recombination and valve-regulated design. Each cell has a low-pressure valve. yuasa.deIn what orientation may the NP24-12I be mounted?Installation and operation are possible at angles of up to 90 degrees from the upright position. Permanent overhead installation is not intended.What charging voltages must be observed and what is the maximum permissible charging current?Float charge at 20 °C 13.65 V per block. Cyclic charging at 20 °C 14.5 V per block. Temperature compensation float approx. −3 mV per cell and °C, cyclic approx. −4 mV per cell and °C. Cyclic charging current up to 6 A.Can the battery be operated in a sealed enclosure?No, VRLA batteries can release hydrogen gas. Installation in airtight enclosures is not permitted and adequate ventilation must always be ensured. 

The Yuasa NP7-12 is a high-performance, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 7 Ah. It impresses with its reliable performance, robust construction and versatility, making it ideal for industrial applications, security and emergency power systems.Highlights at a glanceReliable capacity: 7 Ah at 12 V for a constant power supply.VdS approved: G 189099 for safety-critical applicationsCompact design: 151 × 65 × 97.5 mm, ideal for limited installation space.Flexible installation: Can be installed in any position, except permanently upside down.Maintenance-free: VRLA technology with low-pressure vent valves.Long-lasting: EUROBAT ‘Standard Commercial’ classification for up to 5 years’ service life.High current capacity: Up to 210 A discharge current for 1 second.Rugged performance for demanding applicationsThe NP7-12 offers a 20-hour capacity of 7 Ah (up to 1.75 V/cell at 20 °C) and a 10-hour capacity of 6.4 Ah (up to 1.8 V/cell). Thanks to its high current-carrying capacity of up to 210 A for 1 second, the battery is particularly suitable for emergency power systems, UPS systems and safety-critical applications.Maintenance-free operation and long service lifeThe NP7-12 is classified as ‘Standard Commercial’ according to EUROBAT and offers a service life of up to 5 years at an ambient temperature of 20 °C. Self-discharge is only approx. 3% per month, which ensures a high level of operational readiness even during prolonged storage. The casing is made of durable ABS plastic (UL94:HB) and is available in a flame-retardant version (UL94:V0) on request. The battery complies with the ISO 9001 quality standard.Easy integration and reliable technologyThe battery is fitted with Faston connectors (4.75 mm) and can be easily integrated into almost any system. It can be installed in any position, except permanently upside down. Each of the six cells is fitted with a low-pressure relief valve which closes automatically once pressure has been equalised, ensuring maintenance-free and safe operation. The recommended charging voltage for float charging is 13.65 V (±1%) per block; for cyclic operation, it is 14.5 V (±3%). The maximum charging current is 1.75 A in cyclic operation; there is no limit for float charging.Features ModelYuasa NP7-12 Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)7 (at a 20-hour rate) Maximum discharge current80A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years ( Yuasa -design) Dimensions (L/W/H, mm)151 x 65 x 94 Weight (kg)2.5 ConnectionFaston 4.8 mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa 12V, 7Ah lead-acid batteryHow long does the NP7-12 last?The NP7-12 offers a service life of up to 5 years at an ambient temperature of 20 °C and meets the EUROBAT ‘Standard Commercial’ category.What applications is the battery suitable for?The battery is suitable for:UPS systemsFire detection and alarm systemsMedical devicesEmergency lightingTelecommunications and control systemsIs flexible installation possible?Yes, the battery can be used in almost any position; only a permanently upside-down mounting position should be avoided.What safety features are built in?The battery features a robust ABS casing and low-pressure relief valves for safe gas pressure regulation. A flame-retardant casing is available as an option.How and using which parameters should the NP7‑12 be charged correctly?Float charging voltage: 13.65 V block voltage (2.275 V/cell) at 20 °C, temperature compensation –3 mV/cell/°C.Cyclic (boost) charging voltage: 14.5 V block (2.42 V/cell), compensated by –4 mV/cell/°C.Recommended charging current for cyclic operation: up to approx. 1.75 A (~0.25 C)What is the maximum discharge current and how good is the deep-discharge protection?Short-term peak current (1 sec.): 210 A,1-minute current: 48 AInternal impedance: approx. 23 mΩ at 1 kHz.The battery recovers excellently after deep discharge and is structurally robustWhat is the rate of self-discharge during storage, and what should be borne in mind?At 20 °C, the self-discharge rate is approximately 3 % per month. The NP7‑12 can be stored for up to 12 months, provided it is recharged regularly. It should be stored at temperatures between –20 °C and +60 °C, ideally at a maximum of +30 °C. 

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The XCELL XP2.3-12 is a slim 12-volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides a reliable power supply for safety-critical and industrial applications and, with VdS G 115071 certification, meets the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS approved: G 115071 for safety-related applicationsPower reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm, weighing approx. 0.9 kgMaintenance-free: Valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security technology, emergency lighting, fire alarm systems, communication and measuring equipment, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) ensures a stable power supply, even during brief load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C is recommended, with temperature compensation of minus 18 mV per °C. In cyclic operation, the final charging voltages range from 14.50 to 14.90 V at 25 °C, with compensation of minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, from minus 10 °C to plus 50 °C during charging, and from minus 20 °C to plus 50 °C for storage.Dimensions and connectionsThe T1 copper flat plug connectors enable quick integration into existing systems. Thanks to its compact, elongated design, the battery fits particularly well in narrow enclosures and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20-hour rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4,8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP2.3-12What is the expected service life of the XP2.3-12 in standby mode?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years of float operation. Regular testing cycles and the correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety systems such as fire alarm and intruder alarm systems, emergency lighting, communication and measuring equipment, as well as control systems with a 12-volt supply.What charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please note the relevant temperature compensation.What is the self-discharge rate?At 25 °C, approximately 91 per cent of capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.What connections are available on the XP2.3-12?The XP2.3-12 features T1 copper flat plug connectors for quick and secure installation.