XCELL XP2.3-12 lead-acid battery with VdS approval - 12 V and 2.3 Ah

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The XCELL XP7-12 is a valve-regulated AGM battery with 12 volts and 7 Ah nominal capacity (C20). It impresses with its compact dimensions, high operational reliability and long service life. Thanks to its robust design and low self-discharge, it is ideal for use in safety and emergency power systems, medical technology, measurement and control technology, telecommunications and numerous mobile and stationary applications.Highlights at a glanceCompact performance: 12 V, 7.0 Ah (20h)Flexible use: Any operating position possible (except permanently overhead)Durable: up to 5 years design life at 20 °CHigh reliability: Low self-discharge <3 % per month at 25 °CRobust housing: ABS UL94 HBReliable power supply for a wide range of applicationsThe XCELL XP7-12 delivers constant performance even under demanding conditions. The AGM technology ensures efficient gas recombination, making the battery virtually maintenance-free. With a maximum discharge current capacity of 105 A (5 seconds), it is also suitable for applications with short-term peak loads.Efficiency meets service lifeIn standby operation, the battery should be charged with a charging voltage of 2.25–2.30 V/cell. For cyclic operation, a charging voltage of 2.45–2.50 V/cell is recommended. The temperature compensation is –3 mV/cell/°C in standby operation and –4 mV/cell/°C in cycle operation. The recommended maximum current is 0.3C (approx. 2.1 A). In cycle use, depending on the depth of discharge, the battery achieves several hundred charge and discharge cycles.Technology for flexible applicationsThe operating temperature range of the cells when charging is between –15 °C and +50 °C. When discharging, it is –20 °C to +60 °C and for storage –20 °C to +50 °C. T1 or T2 plug-in connections are available for the electrical connection. The recommended tightening torque for this is between 2 and 3 Newton metres. Each cell is additionally equipped with a safety valve, which further increases operational reliability.Features  ModelXCELL XP7-12 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  FAQ about the XCELL XP7-12 industrial batteryFor which applications is the XP7-12 ideally suited?The XCELL XP7-12 is predestined for emergency power supply, safety and fire alarm systems, medical technology, telecommunications, measurement and control technology as well as mobile devices with cyclic energy requirements.How cycle-resistant is the XP7-12?At 30 % depth of discharge, the battery achieves over 1,000 charge and discharge cycles. At higher depths of discharge, the service life is reduced accordingly, but remains in the range of several hundred cycles.What are the special safety features?The battery is equipped with overpressure valves. Like all VRLA batteries, it can emit small amounts of hydrogen. It should therefore not be used in airtight enclosures and adequate ventilation must be ensured.Which chargers are suitable for the XP7-12?Chargers with constant voltage, designed for VRLA AGM batteries, are recommended. The correct setting of the charging voltage and temperature compensation is crucial for a long service life.How is the battery installed?The battery can be installed in any position except permanently upside down. The connection is made via T1 or T2 plug-in connectors with a tightening torque of 2–3 Nm. 

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and 12 Ah capacity. With Faston 6.3 mm connectors, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems as well as medical and industrial devices. Its spill-proof AGM technology ensures maintenance-free and long-lasting energy supply.Highlights at a glanceVdS certified: Tested safety according to VdS G120034Compact design: Only 151 x 98 x 95 mm at approx. 4.1 kg weightReliable performance: 12 Ah capacity at 20-hour dischargeHigh discharge current: Up to 180 A (5 sec.) for peak loadsDurable: Up to 5 years of service life at 25 °C in standby modePowerful performance for challenging applicationsThanks to its robust construction and uniform current output, the XP12-12F2 is suitable for a wide range of applications: from safety-relevant systems and telecommunications to medical devices. The Faston connectors (6.3 mm) enable easy integration into existing systems. Even during short-term peak loads, the battery reliably delivers energy with up to 180 A discharge current for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float lifetime of up to 5 years (at 25 °C), the battery is characterised by a low self-discharge rate of less than 3 % per month, making it ready for immediate use even after long storage. It also impresses with good performance at extreme temperatures from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (according to UL94-HB/UL94-V0) and meets international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage in standby operation is 2.25 – 2.30 V/cell (corresponds to 13.5 – 13.8 V) and in cycle operation 2.45 – 2.50 V/cell (corresponds to 14.7 – 15.0 V) at an ambient temperature of 25 °C. Automatic temperature compensation from –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby operation?Under ideal conditions (25 °C ambient temperature), the expected lifetime in standby operation is up to 5 years.Is the battery VdS certified?Yes, the battery holds the VdS approval with the number G120034 and is thus suitable for safety-relevant applications.In which temperature ranges can the battery be used?The battery is designed for a charging range from –15 °C to +50 °C and a discharging range from –20 °C to +60 °C.How high is the self-discharge?At 25 °C, the self-discharge of the battery is below 3 % per month. It is recommended to recharge the battery if stored for more than six months.Which charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cycle operation, it should be 14.7–15.0 V. Temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cycle operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard detection systems as well as for hobby and camping. However, it is not suitable for starting or traction applications.

The XCELL XP18-12 is a high-performance and maintenance-free lead battery known for its reliability and longevity. Based on proven AGM technology (Absorbent Glass Mat), this battery offers a nominal voltage of 12 V and a capacity of 18 Ah. It has been specially developed for demanding stationary and cyclic applications where a constant and secure power supply is crucial. Thanks to its sealed VRLA design, it is leak-proof and can be operated in any position.Highlights at a glanceReliable performance: 18 Ah capacity at 12 V, which corresponds to a total energy of 216 Wh.Durable: Designed for a service life of up to 5 years according to Eurobat classification.Maintenance-free: The VRLA AGM technology eliminates the need to top up water.Safe and flexible: Completely sealed, leak-proof and suitable for installation in any position.Low self-discharge: Ideal for standby operation and seasonal use.VdS approval: VDS G115072Reliable energy for critical applicationsThe XCELL XP18-12 is the ideal energy solution for systems where reliability is paramount. With its standard dimensions of 181 x 77 x 167 mm and a weight of approximately 5.4 kg, it can be easily integrated as a replacement for existing batteries in a wide variety of devices. Its primary areas of application include uninterruptible power supplies (UPS), security and alarm systems, emergency lighting systems as well as applications in medical and rehabilitation technology. The wide operating temperature range ensures stable performance even under demanding environmental conditions.Efficiency and safety thanks to AGM technologyThe AGM technology of the XCELL XP18-12 binds the electrolyte in a glass fibre fleece. This design not only prevents acid leakage, but also provides high vibration resistance and excellent cycle resistance compared to conventional lead-acid batteries. As there is no gassing under normal operating conditions, the battery can be safely used indoors and in housings without special ventilation. This maximises user safety and reduces maintenance to a minimum.Proven and robust lead AGM technologyIn contrast to open lead-acid batteries, the XP18-12 is valve-regulated and sealed thanks to its VRLA design (Valve Regulated Lead Acid). This enables internal gas recombination and ensures consistently high performance throughout its entire service life. The lead calcium grid plates used contribute to a very low self-discharge rate, making the battery perfect for standby operation or for applications with longer periods of inactivity.Features  ModelXCELL XP18-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)18 (at 20h rate) Maximum discharge current270A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle use)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.6 ConnectionM5 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL lead battery XP18-12What does the term AGM mean?AGM stands for "Absorbent Glass Mat". In this technology, the battery electrolyte is bound in a fleece made of glass fibres. This makes the battery leak-proof, maintenance-free and very resistant to vibration.For which applications is the XP18-12 battery suitable?The battery is ideally suited for uninterruptible power supplies (UPS), alarm systems, fire alarm control panels, emergency lighting systems as well as medical and rehabilitation equipment such as patient lifts or electric wheelchairs.What is the expected service life of the battery?The XCELL XP18-12 is designed for a service life of up to 5 years in standby operation (standby) according to the Eurobat classification. The actual service life depends heavily on the application, operating temperature and depth of discharge.Can several XP18-12 batteries be connected together?Yes, you can connect several batteries of this type together. For a higher voltage (e.g. 24 V) connect two batteries in series. For higher capacity, connect the batteries in parallel. Please only use batteries of the same type, age and state of charge.Is the battery actually maintenance-free?Yes, thanks to the sealed VRLA AGM design, the battery is completely maintenance-free. Refilling with distilled water is not required during the entire service life.How should the battery be stored when not in use?Store the battery in a cool, dry place and ensure that it is fully charged. Due to the low self-discharge, the state of charge should be checked every six months and the battery recharged if necessary to avoid deep discharge. 

The XCELL XP26-12 is a powerful, maintenance-free 12-volt lead-acid battery with a 26 Ah capacity (20h rate), characterised by its long service life. It has been specially developed for reliable, safety-relevant and industrial applications. Thanks to its robust AGM technology and M5 inlay connections, it offers a high current output. The battery is also VdS certified (G115073).Highlights at a glanceCertified: VdS G115073, suitable for fire and burglar alarm systemsPowerful performance: 26 Ah capacity at 20-hour dischargeHigh current output: Up to 390 A discharge current (5 seconds)Durable: Up to 5 years service life in standby operation at 25 °CMaintenance-free: Leak-proof AGM technology (VRLA)Powerful performance for challenging applicationsThe XP26-12 ensures a constant and reliable power supply, even during short-term peak loads, with a discharge current of up to 390 A for 5 seconds. With its compact dimensions (165 × 176 × 127 mm) and low weight of approx. 7.9 kg, it is ideal for mobile devices, emergency power supply systems, telecommunications, safety lighting and other industrial applications.Efficient and long-lasting power supplyThe AGM technology ensures maintenance-free operation with a minimum self-discharge of less than 3% per month at 25 °C. For continuous operation (float charging), a voltage of 13.60–13.80 V is recommended, while for cyclic operation 14.50–14.90 V is ideal. Integrated temperature compensation secures the efficiency of the charging performance regardless of the ambient temperature. The maximum charging current is 7.8 A.Technology for reliable safetyThe battery is equipped with a flame-retardant housing according to UL94-HB/V0 and meets international standards such as CE, UL, ISO 9001. The construction enables safe operation over several years in standby mode, with proper maintenance and ambient temperature. Even under difficult conditions, the battery maintains a stable capacity performance, approximately 85 % at 0 °C and 65 % at –15 °C.Features  ModelXCELL XP26-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)26 (at 20h rate) Maximum discharge current390A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP26-12How long is the service life of the XCELL XP26-12 battery?The float service life is 3 to 5 years at an ambient temperature of 25 °C, depending on operating conditions.What is the XCELL XP26-12 suitable for?The battery is suitable for safety-relevant systems (e.g. fire and intrusion alarm systems), UPS systems, telecommunications equipment, medical technology and other industrial applications.Is the XCELL XP26-12 battery VdS certified?Yes, the XCELL XP26-12 holds VdS approval with number G115073.How high is the self-discharge rate?Self-discharge is less than 3 % per month at 25 °C.Which charging parameters must be observed?For standby operation, a voltage of 13.60 to 13.80 V is recommended. In cyclic operation, the voltage is 14.50 to 14.90 V. The maximum charging current should not exceed 7.8 A.Is the battery maintenance-free, leak-proof and can it be used in any position?Yes, the XP 26‑12 VDS is sealed maintenance-free, leak-proof and can be used in any position. 

The XCELL XP7/12F2 convinces as a reliable 12-volt lead-acid battery with 7.2 Ah (20h rate) capacity, robust AGM technology and compact dimensions. Equipped with Faston connectors, this battery is ideal for security and emergency power systems, telecommunications and mobile devices. With a service life of up to 10 years in standby operation, it provides a stable power supply with minimal maintenance.Highlights at a glanceRobust capacity: 7.2 Ah with 20-hour discharge for various areas of applicationLong service life: Up to 10 years standby life at 20 °CHigh discharge reserves: Maximum discharge currents up to 108 A for 5 secondsTemperature resistant: Powerful from -15 °C to +50 °CCompact design: Only 151 x 65 x 100 mm at approx. 2.26 kgStrong performance for demanding areas of applicationThe XCELL XP7/12F2 is the ideal solution for applications that require a compact design with high energy density. Typical areas of use are uninterruptible power supplies (UPS), safety-related lighting systems, medical devices, alarm systems and other industrial applications. Thanks to its Absorbent Glass Mat technology, the battery offers reliable performance even in short-term peak loads.Efficient energy for continuous operationThis battery is characterised by a low self-discharge of only about 9 % in 3 months at 25 °C, making it quickly ready for use even after longer idle periods. Its charging characteristic supports both standby operation with a recommended voltage of 13.60 to 13.80 V and cyclic operation with 14.50 to 14.90 V. With a recommended max. charging current of 2.16 A, the battery remains safe and efficient in operation.Reliable technology for the highest demandsAGM technology ensures leak-proof, maintenance-free operation with an internal gas recovery system. The XCELL XP7/12F2 can be installed in any orientation (except upside down) and reliably withstands temperatures between -15 °C and +50 °C in discharge operation. Its high cycle stability and UL and CE certifications emphasise its suitability for demanding industrial environments.Features  ModelXCELL XP7-12F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, CE, UL  FAQs about the XCELL XP7/12F2 lead-acid batteryHow long is the service life of the battery?The XCELL XP7/12F2 is designed for a service life of up to 10 years in standby operation at 20 °C.What is the battery particularly suitable for?It is ideally suited for applications such as UPS systems, emergency lighting, medical devices, telecommunications systems and mobile electronic devices.Can the battery also be used at low temperatures?Yes, the battery operates reliably in a discharge temperature range from -15 °C to +50 °C.Does the battery require regular maintenance?No, the battery is maintenance-free thanks to its sealed, valve-regulated AGM design.Which charging parameters must be observed?For standby operation, a charging voltage of 13.60 – 13.80 V is recommended, for cyclic operation 14.50 – 14.90 V. The maximum charging current should not exceed 2.16 A.