XCELL XP7-12F2 lead-acid battery with 12 V and 7 Ah

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and 12 Ah capacity. With Faston 6.3 mm connectors, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems as well as medical and industrial devices. Its spill-proof AGM technology ensures maintenance-free and long-lasting energy supply.Highlights at a glanceVdS certified: Tested safety according to VdS G120034Compact design: Only 151 x 98 x 95 mm at approx. 4.1 kg weightReliable performance: 12 Ah capacity at 20-hour dischargeHigh discharge current: Up to 180 A (5 sec.) for peak loadsDurable: Up to 5 years of service life at 25 °C in standby modePowerful performance for challenging applicationsThanks to its robust construction and uniform current output, the XP12-12F2 is suitable for a wide range of applications: from safety-relevant systems and telecommunications to medical devices. The Faston connectors (6.3 mm) enable easy integration into existing systems. Even during short-term peak loads, the battery reliably delivers energy with up to 180 A discharge current for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float lifetime of up to 5 years (at 25 °C), the battery is characterised by a low self-discharge rate of less than 3 % per month, making it ready for immediate use even after long storage. It also impresses with good performance at extreme temperatures from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (according to UL94-HB/UL94-V0) and meets international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage in standby operation is 2.25 – 2.30 V/cell (corresponds to 13.5 – 13.8 V) and in cycle operation 2.45 – 2.50 V/cell (corresponds to 14.7 – 15.0 V) at an ambient temperature of 25 °C. Automatic temperature compensation from –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby operation?Under ideal conditions (25 °C ambient temperature), the expected lifetime in standby operation is up to 5 years.Is the battery VdS certified?Yes, the battery holds the VdS approval with the number G120034 and is thus suitable for safety-relevant applications.In which temperature ranges can the battery be used?The battery is designed for a charging range from –15 °C to +50 °C and a discharging range from –20 °C to +60 °C.How high is the self-discharge?At 25 °C, the self-discharge of the battery is below 3 % per month. It is recommended to recharge the battery if stored for more than six months.Which charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cycle operation, it should be 14.7–15.0 V. Temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cycle operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard detection systems as well as for hobby and camping. However, it is not suitable for starting or traction applications.

The XCELL XP2.3-12 is a slim 12 volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides reliable power supply in safety-relevant and industrial applications and, with VdS G 115071, fulfils the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS recognised: G 115071, additionally UL and CE, manufactured to ISO 9001Power reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm at approx. 0.9 kgMaintenance-free: valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security equipment, emergency lighting, fire alarm systems, communications and measuring devices, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) supports stable voltage supply, even during short-term load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C with temperature compensation of minus 18 mV per °C is recommended. In cyclic operation, the end-of-charge voltages are 14.50 to 14.90 V at 25 °C, compensation minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, minus 10 °C to plus 50 °C during charging, and minus 20 °C to plus 50 °C for storage.Dimensions and connectionThe T1 flat plug connectors made of copper allow quick integration into existing systems. The compact, elongated design means the battery can be positioned particularly well in narrow housings and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP2.3-12What is the expected service life for the XP2.3-12 in standby operation?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years in float operation. Regular test cycles and correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety-related systems such as fire alarm systems and intruder alarm systems, emergency lighting, communications and measuring devices, as well as controls with 12 volt supply.Which charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please observe the respective temperature compensation.What is the self-discharge rate?At 25 °C, about 91 per cent capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.Which connectors are present on the XP2.3-12?The XP2.3-12 is equipped with T1 flat plug connectors made of copper for quick, secure installation. 

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. Equipped with maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclical operation, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for long-lasting power supply.VdS-certified: Ideal for fire and burglar alarm systems.Maintenance-free: Leak-proof AGM technology with > 99 % gas recombination.High current carrying capacity: Up to 360 A discharge current for 1 second.Flexible mounting: Operation in all positions (except permanently overhead).Durable: EUROBAT class “Standard Commercial” with up to 5 years service life.Powerful performance for safety-critical applicationsThe NP12-12 delivers 12 Ah with a 20-hour discharge (to 1.75 V/cell) and 11.1 Ah with a 10-hour discharge (to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited for short-term power peaks.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), the NP12-12 is absolutely maintenance-free and leak-proof. The battery features self-closing low-pressure release valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ according to EN IEC 60896-21, the short-circuit current is 320 A. The low self-discharge of approx. 3 % per month allows long-term storage with high operational readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (standby charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa NP12-12 lead-acid batteryFor which applications is the NP12-12 suitable?The battery is ideally suited for:VdS-compliant fire and burglar alarm systemsUninterruptible power supplies (UPS)Safety lightingTelecommunicationsControl and regulation technologyMedical devicesIs the battery maintenance-free?Yes, thanks to AGM technology the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for permanently upside-down installation.Which charging parameters (float vs. cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charge limitation: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarge: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3 % per month at 20 °C

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The Yuasa NP24-12I VdS is an industrial, valve-regulated lead-acid battery (VRLA) with 12 V nominal voltage and 24 Ah capacity. With leak-proof AGM technology, high current carrying capacity, and VdS approval, this maintenance-free battery is the reliable energy source for safety-critical applications such as fire alarm systems, UPS systems, or telecommunications installations.Highlights at a glanceReliable capacity: 24 Ah (20h) / 22.3 Ah (10h) at 12 V for constant power supplyCertified: VdS approval for safety-relevant systemsHigh peak load: Maximum discharge current up to 500 A for 1 secondMaintenance-free: AGM technology with > 99 % gas recombinationFlexible installation: Female thread or bolt connections (M5) with 2.45 Nm tightening torquePowerful solution for critical systemsWith a nominal capacity of 24 Ah (20h discharge to 1.75 V/cell) and 22.3 Ah (10h discharge to 1.8 V/cell), the NP24-12I ensures reliable and stable power supply – even during sudden load peaks up to 500 A. Ideally suited for emergency power supplies, security technology and communication systems where reliability is the highest priority.Robust technology with high operational reliabilityThe maintenance-free AGM technology (Absorbent Glass Mat) completely contains the electrolyte in the separator, so no free electrolyte is present. With gas recombination of over 99 % and self-closing safety valves, the battery is safe in operation and does not need topping up. The low self-discharge of about 3 % per month makes it particularly stable in storage. The robust ABS plastic housing complies with UL94:HB, and a flame-retardant version in accordance with UL94:V0 is available on request.Features  ModelYuasa NP24-12I VdS Battery typeVRLA AGM (cycle resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current240A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cycle operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)175 x 166 x 125 Weight (kg)8.6 ConnectionM5 thread CertificationsIEC 60896-21+22, UL, VdS  FAQs about the Yuasa lead-acid battery with 12V and 24AhFor which applications is the NP24-12I suitable?It is ideal for fire detection systems, UPS systems, emergency lighting, telecommunications, security technology and PV backup systems.What is the typical service life in standby mode?The NP24-12I offers a service life of up to 5 years at 20 °C and is classified as "Standard Commercial" according to EUROBAT.What type of connection is used?Female thread or bolt connections (M5) with a tightening torque of 2.45 Nm ensure a secure and vibration-resistant connection.Is the battery really maintenance-free and leak-proof?Yes. VRLA technology with gas recombination and valve-regulated design. Each cell has a low-pressure valve. yuasa.deIn which position may the NP24-12I be installed?Installation and operation possible up to 90 degrees from the upright position. Permanent overhead installation is not intended.Which charging voltages must be observed and how high may the charging current be?Float charge at 20 °C 13.65 V per block. Cyclic charge at 20 °C 14.5 V per block. Temperature compensation Float about −3 mV per cell and °C, cyclic about −4 mV per cell and °C. Cyclic charging current up to 6 A.Can the battery be operated in a closed housing?No, VRLA batteries can emit hydrogen gas. Installation in hermetically sealed enclosures is not permitted and adequate ventilation must always be ensured. 

The XCELL XP26-12 is a powerful, maintenance-free 12-volt lead-acid battery with a 26 Ah capacity (20h rate), characterised by its long service life. It has been specially developed for reliable, safety-relevant and industrial applications. Thanks to its robust AGM technology and M5 inlay connections, it offers a high current output. The battery is also VdS certified (G115073).Highlights at a glanceCertified: VdS G115073, suitable for fire and burglar alarm systemsPowerful performance: 26 Ah capacity at 20-hour dischargeHigh current output: Up to 390 A discharge current (5 seconds)Durable: Up to 5 years service life in standby operation at 25 °CMaintenance-free: Leak-proof AGM technology (VRLA)Powerful performance for challenging applicationsThe XP26-12 ensures a constant and reliable power supply, even during short-term peak loads, with a discharge current of up to 390 A for 5 seconds. With its compact dimensions (165 × 176 × 127 mm) and low weight of approx. 7.9 kg, it is ideal for mobile devices, emergency power supply systems, telecommunications, safety lighting and other industrial applications.Efficient and long-lasting power supplyThe AGM technology ensures maintenance-free operation with a minimum self-discharge of less than 3% per month at 25 °C. For continuous operation (float charging), a voltage of 13.60–13.80 V is recommended, while for cyclic operation 14.50–14.90 V is ideal. Integrated temperature compensation secures the efficiency of the charging performance regardless of the ambient temperature. The maximum charging current is 7.8 A.Technology for reliable safetyThe battery is equipped with a flame-retardant housing according to UL94-HB/V0 and meets international standards such as CE, UL, ISO 9001. The construction enables safe operation over several years in standby mode, with proper maintenance and ambient temperature. Even under difficult conditions, the battery maintains a stable capacity performance, approximately 85 % at 0 °C and 65 % at –15 °C.Features  ModelXCELL XP26-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)26 (at 20h rate) Maximum discharge current390A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP26-12How long is the service life of the XCELL XP26-12 battery?The float service life is 3 to 5 years at an ambient temperature of 25 °C, depending on operating conditions.What is the XCELL XP26-12 suitable for?The battery is suitable for safety-relevant systems (e.g. fire and intrusion alarm systems), UPS systems, telecommunications equipment, medical technology and other industrial applications.Is the XCELL XP26-12 battery VdS certified?Yes, the XCELL XP26-12 holds VdS approval with number G115073.How high is the self-discharge rate?Self-discharge is less than 3 % per month at 25 °C.Which charging parameters must be observed?For standby operation, a voltage of 13.60 to 13.80 V is recommended. In cyclic operation, the voltage is 14.50 to 14.90 V. The maximum charging current should not exceed 7.8 A.Is the battery maintenance-free, leak-proof and can it be used in any position?Yes, the XP 26‑12 VDS is sealed maintenance-free, leak-proof and can be used in any position.