1 phase inverter

The Deye SUN-10K-SG02LP1-EU-AM3-P is an extremely powerful, single-phase hybrid inverter of the latest generation, specially developed for demanding low-voltage photovoltaic systems. With a rated output power of 10 kW it is one of the most powerful single-phase devices on the market and enables significant optimisation of self-consumption as well as an uninterrupted emergency power supply for large single-phase domestic grids or specific load groups.The abbreviation "P" stands for the support of high-current PV modules, which allows the connection of modern panels with high currents (up to 26 A per MPPT). It works with 48 V low-voltage batteries together and offers an excellent performance with its high charging and discharging capacity of up to 220 A for the management of large battery storages.Highlights at a glanceEnormous 10 kW single-phase power: Ideal for large households or commercial applications with a single-phase structure requiring high load coverage.High current inputs (26 A): Perfectly matched to the latest generation of PV modules with large cell formats and high short-circuit currents.48 V low-voltage system: Full compatibility with cost-effective and modularly expandable 48 V battery storage systems (e.g. LiFePO4 from Deye or Pylontech).220 A charging/discharging current: Enables extremely fast charging of the storage unit in high sunlight and the supply of large consumers from the battery.Full UPS function: Switches to stand-alone mode in less than 4 ms in the event of a mains failure, so that even sensitive electronics continue to run without interruption.Three MPPT trackers: Offers maximum flexibility in roof occupancy and optimises yield with different alignments or partial shading.AC coupling & Smart Load: Existing inverters can be easily integrated; surpluses can also be specifically used for heat pumps or immersion heaters.Areas of applicationLarge single-phase house gridsMaximum independence by storing large amounts of energy in cost-effective 48 V batteries.Off-Grid & stand-alone solutionsThanks to its high output of 10 kW, the device is ideal for autonomous systems in remote areas.Retrofitting & ExpansionCan be installed in parallel with existing string inverters thanks to AC coupling to retrofit a storage system.Installation & Safety instructionsHigh battery currentsWith a discharge current of up to 220 A, it is essential to use massive cable cross-sections (e.g. 2x 50 mm² or 70 mm²) and corresponding high-current fuses.Thermal managementDespite its high efficiency, there is heat dissipation at 10 kW output. Ensure a mounting location with good air circulation and keep to the minimum distances.Phase coupling in the homeWhen installing in a German 3-phase grid, please observe the unbalanced load regulation (max. 4.6 kVA phase difference to the grid), unless a phase-balancing measurement or a zero feed-in setup is used. Features ModelDeye SUN-10K-SG02LP1-EU-AM3-P Rated output power**10 kW** (10,000 Watt) Phases**1-Phase** (230V) Battery type**Low voltage (LV)** 48V Li-Ion / Lead Number of MPP trackers**3 MPPT** Max. PV input power**13,000 Watt** (13 kW) Max. charging/discharging current**220 A** Protection rating**IP65** (Weatherproof) Special featureSupports **Smart Load** & AC-coupling  FAQs on the Deye SUN-10K-SG02LP1-EU-AM3-PCan I supply a 3-phase house with this single-phase device?Yes, by using net metering. The inverter feeds into one phase. A smart meter installed at the grid connection point ensures that the consumption of the other two phases is arithmetically balanced (net metering), so that the electricity meter effectively remains at zero.How many batteries can I connect?Virtually unlimited. Thanks to the 48 V system, many battery modules can be connected in parallel. The inverter communicates via CAN or RS485 with the master battery management system (BMS).Is the device suitable for outdoor use?Yes, thanks to IP65. The housing is dustproof and protected against water jets. Nevertheless, it is recommended to install it in a shaded place to extend the service life of the electronics by reducing thermal stress.

The Deye SUN-3.6K-SG05LP1-EU-AM2 is a compact, single-phase hybrid inverter that has been specially developed for smaller photovoltaic systems in residential buildings. With an AC output power of 3.6 kW it offers the ideal introduction to energy independence by combining solar power generation, battery management and emergency power supply in one device.As part of the SG05 series this inverter is optimised for operation with 48V low-voltage batteries. This makes the system particularly flexible and cost-efficient when selecting storage. Despite its compact design, it features all the "big" Deye features such as the smart load connection and parallel scalability.Highlights at a glanceLow-voltage battery connection: Compatible with common 48V lithium-ion and lead-acid batteries, offering a wide range of affordable storage options.Colour touch LCD: Intuitive operation and real-time monitoring of all energy flows directly at the unit via the integrated display.2 MPPT trackers: Enables the connection of two independent module strings, ideal for roofs with different orientations (e.g. east-west).Excellent backup function: Lightning-fast switch to emergency power in less than 10 ms, so that sensitive devices continue to run without interruption in the event of a power failure.AC coupling possible: Existing solar installations can easily be integrated via the inverter to retrofit them with a storage system.Parallel connection: Up to 16 units can be connected in parallel to flexibly increase system performance as demand increases.Smart load connection: The "Smart Load" port enables targeted control of consumers such as heating rods or pool pumps when there is a surplus of solar energy.Areas of applicationThe SUN-3.6K is the specialist for efficient small-scale systems:Detached houses & flatsPerfect for PV systems up to approx. 4.6 kWp to massively increase self-consumption within the household.RetrofittingYou can add a 48V battery storage system to an existing system without having to replace the old inverter.Critical infrastructureSecuring servers, aquariums or heating controls through reliable UPS function.Installation & safety instructionsBattery protectionAs high currents can flow in 48V systems, please ensure appropriately dimensioned cable cross-sections and a suitable DC fuse between the battery and inverter.Wall mountingThe device is robustly built and designed for wall mounting. Thanks to IP65 protection, installation in protected outdoor areas is also possible.Earthing & lightning protectionEnsure that the system is installed with professional earthing to protect the electronics and connected appliances from surges. Properties ModelDeye SUN-3.6K-SG05LP1-EU-AM2 Nominal output power3.6 kW (3,600 watts) Phases1-phase (230V) Battery typeLow voltage (LV) 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charge/discharge current90 A Max. efficiency97.60 % Protection classIP65** (Weatherproof) Special featureIncluding **connection cable set  FAQs about the Deye SUN-3.6K-SG05LP1Which batteries are suitable for this inverter?Almost all 48V lithium storage units.It works perfectly with common models such as Pylontech (US2000C/US3000C/US5000), Dyness or Deye's own low-voltage batteries. Conventional lead gel batteries can also be configured.Can I use the inverter for a balcony power plant?Technically yes, but it is oversized.While it far exceeds the output of a balcony power plant, it offers the advantage that you can integrate a proper battery and later expand the system to a full rooftop installation.Is the WLAN module for app control included?Usually, yes.Deye usually supplies a Wifi dongle, which allows you to connect the system with the "Solarman" app or Deye's own portal to view yields and consumption worldwide.Can the device start a generator?Yes.Via the signal port, the inverter can send an automatic start command to compatible generators when the battery level is too low and there is no sun. Scope of delivery: Deye SUN-3.6K-SG05LP1-EU-AM2-P (3.6 kW 1-phase hybrid inverter) 1 x Deye SUN-3.6K-SG05LP1-EU-AM2-P inverterA compact single-phase hybrid inverter with 3.6 kW output, integrated colour LCD touchscreen and support for 48V low voltage battery systems.1 x Wall mount bracketA robust metal mounting rail to securely fasten the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.1 x current transformer (CT - Current Transformer)An external hinged current transformer for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of battery connection cables (DC cables)A pair of pre-assembled high-performance cables (red and black) for direct electrical connection of a 48V battery (specific for this bundle version).1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty plugs for proper installation of the wall mount bracket.1 x user manual (User Manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-6K-SG05LP1-EU is an ultra-modern and powerful single-phase hybrid inverter that acts as an intelligent control centre for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar modules, the battery storage system and the public grid. Thanks to its integrated emergency power function, you are reliably supplied with high power even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and grid consumption for maximum self-consumption.High performance: With 6 kW output power ideal for larger households, heat pumps or small commercial operations.Integrated emergency power supply: Provides an uninterruptible power supply (UPS level) in the event of a grid failure.Two MPP trackers: Enables the connection of two independent module arrays, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage battery storage systems.Comprehensive monitoring: Integrated WLAN module for simple and intuitive system monitoring via app.Intelligent energy management for your homeThe Deye hybrid inverter is more than just a converter from direct current to alternating current. It is the brain of your energy supply. During the day, it supplies your consumers directly with solar power, while surplus energy is stored in your battery storage system for the night or for cloudy days. The energy is only fed into the public grid when the storage system is full and no consumer requires electricity. This maximises your self-consumption and significantly reduces your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility when planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west side of the roof) or with different module types. Each tracker optimises the output of its string individually so that you always achieve the maximum possible energy yield, even with complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. If the public power grid fails, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerators or the IT infrastructure with power from the battery storage system. This switchover time to UPS level (uninterruptible power supply) ensures maximum security of supply. Characteristics  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-lon Battery voltage range (V)40~60 Max. Charging current (A)140 Max. Discharge current (A)140 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)7800 Rated PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC rated power and UPS power (W)6000 Max. AC output power (W)6600 Rated AC output current (A)27.3 Maximum rated AC output current (A)30 Max. Continuous AC throughput (A)40 Peak power (without grid)2-fold rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0.5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short-circuit protection, overload protection, and much more. Overvoltage categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 RATING Installation styleWall bracket Guarantee10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources simultaneously. It is the link between the solar modules, the battery storage system and the public grid. It decides intelligently whether the solar power generated is consumed directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger single-family homes with a higher power consumption, for example due to the operation of a heat pump or an electric car. It is also suitable for small businesses or farms that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for operation with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The exact compatibility list can be found on the manufacturer's website.Do I need additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). To use it, the emergency power consumers to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external changeover switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW 1-phase hybrid inverter) 1 x Deye SUN-6K-SG05LP1-EU InverterA powerful single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x current transformer (CT)An external folding current transformer for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4 compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x User manualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-8K-SG05LP1-EU-AM2-P is a high-performance, single-phase hybrid inverter that has been specially developed to meet the requirements of modern households with high energy demands. With an impressive rated output power of 8 kW it is one of the most powerful single-phase devices in its class and enables comprehensive self-consumption optimisation as well as a seamless emergency power supply.The "P" series is optimised for the use of high-current PV modules. Thanks to an increased input current of up to 26 A per MPPT, state-of-the-art solar panels with large cell formats and high yields can be efficiently integrated. As a low-voltage hybrid, the unit works together with 48 V batteries, allowing flexible and cost-effective scaling of the storage system.Highlights at a glanceEnormous 8 kW single-phase power: Ideal for households with large loads that require a strong single-phase system or high charging capacity for batteries.High-current PV inputs (26 A): Perfectly matched to the latest generation of high-performance modules to maximise solar yield.48 V low-voltage system: Full compatibility with a wide range of affordable and modularly expandable 48 V battery storage (e.g. LiFePO4 from Deye or Pylontech).Massive charging/discharging current (190 A): Enables fast charging of large storage capacities and the supply of power-hungry devices directly from the battery.Real emergency power output (UPS): Switches to off-grid operation in less than 4 ms in the event of a mains failure, so even sensitive electronics are protected without interruption.2 MPPT trackers: Offers flexibility in roof coverage and optimises yield for different orientations or partial shading.Smart Load & AC-Coupling: Surplus energy can be specifically used for consumers such as heat pumps; existing inverters can also be easily integrated.Areas of applicationLarge detached housesMaximising autonomy by combining high PV power with large, affordable 48 V storage systems.Backup & stand-alone solutionsThanks to the high output power of 8 kW, it is excellently suited for standalone systems or for the complete protection of critical phases in regions with an unstable grid.Retrofitting (Retrofit)Can be installed in parallel to already existing PV systems via AC coupling to extend them with a powerful storage function.Assembly & safety instructionsBattery wiringDue to the 48 V technology and currents up to 190 A, large cable cross-sections (e.g. 2x 50 mm² or 70 mm²) and a high-quality DC fuse are absolutely essential.VentilationThe unit features active fan cooling. Install the inverter in a cool, well-ventilated area and maintain the specified minimum clearances.Phase balancingFor use in a 3-phase grid (e.g. Germany) a smart meter is required at the grid feed-in point, to mathematically balance the consumption of all phases. Properties ModelDeye SUN-8K-SG05LP1-EU-AM2-P Rated output power8.0 kW (8,000 Watts) Phases1-phase (230V) Battery typeLow voltage (LV)** 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charging/discharging current190 A Max. efficiency97.60 % Degree of protectionIP65 (Weatherproof) Special featureColour touch display & Smart Load  FAQs for Deye SUN-8K-SG05LP1-EU-AM2-PCan I operate a heat pump with this unit?Yes, easily. Thanks to the high output power of 8 kW and the smart load function, the inverter can be configured so that it preferentially supplies the heat pump with surplus solar energy.Is operation possible without a battery?Yes, the unit will also start without storage. The inverter can be used as a pure PV inverter. A 48 V storage can be added later at any time via plug-and-play to increase self-consumption.Does the unit support zero feed-in?Yes, via the supplied sensor. By means of the CT clamp or a smart meter, the feed-in into the public grid can be limited to 0 watts (zero export). Scope of delivery: Deye SUN-8K-SG05LP1-EU-AM2-P (8 kW 1-phase hybrid inverter) 1 x Deye SUN-8K-SG05LP1-EU-AM2-P inverterA powerful single-phase hybrid inverter with 8 kW power, integrated colour LCD touch screen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for securely attaching the unit to a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split-core current transformer for measuring energy flows at the house feed-in point, required for zero feed-in and self-consumption optimisation.1 x set of battery connection cables (DC cables)A pair of pre-terminated high-performance cables for direct electrical connection of a 48V battery (specific for this "P"-bundle version).1 x set of PV connectors (MC4 compatible)The necessary pairs of DC connectors (plus and minus) for connecting PV strings to the inverter.1 x communication cable (BMS)A pre-terminated RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x user manualA printed manual with detailed installation instructions, circuit diagrams and safety-related information.

The Deye SUN-12K-SG02LP1-EU is a powerful hybrid inverter for modern photovoltaic systems. With up to 12 kW AC output, flexible battery connection and extensive protection functions, it provides a reliable solution for grid-tied and off-grid applications in both residential and commercial environments.Highlights at a glanceHigh performance: 12 kW AC output power for demanding energy systemsFlexible operation: Up to 16 devices can be used in parallel – on-grid and off-gridVersatile storage integration: Supports lithium-ion and lead-acid batteriesIntelligent energy management: 6 freely configurable time slots for charging and dischargingMaximum safety: Integrated protection against overload, short circuit, overvoltage and island operationEfficient energy utilisation with hybrid technologyThe SUN-12K-SG02LP1-EU enables both DC and AC coupling and is therefore ideal for new installations and retrofits. Thanks to a maximum efficiency of 97.6% and an MPPT efficiency of 99.9%, it ensures optimum energy conversion.Flexibility through parallel operationUp to 16 inverters can be operated in parallel, both in grid-tied and in island mode. This enables projects of any size, from private homes with high energy requirements to larger commercial installations.Intelligent battery usageWith a maximum charge and discharge current of 190 A and adaptive communication to the BMS (RS485, CAN), the inverter supports both lithium-ion and lead-acid batteries. The battery can also be charged from a diesel generator, increasing the possible uses.Safety and protection functionsThe Deye SUN-12K-SG02LP1-EU is certified according to international standards and offers extensive protection mechanisms: Overvoltage and short-circuit protection, anti-islanding, residual current monitoring as well as PV string monitoring. This means it meets the highest safety standards for stable operation.Who is the Deye SUN-12K-SG02LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high levels of self-consumptionCommercial businesses with a need for uninterruptible power supplyInstallations that require flexible expansion via parallel operationOperators of PV systems who wish to use both grid operation and stand-alone operationProperties  ModelDeye SUN-12K-SG02LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)250 Max. discharge current (A)250 Charging strategy for Li-ion batterySelf-adapting to BMS PV string input data Max. DC input power (W)24000 Nominal PV input voltage (V)500 Starting voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)12000 Max. AC output power (W)13200 AC output rated current (A)52.2 Maximum AC current (A)57.4 Max. Continuous AC pass-through (A)80 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.6 Size (mm)420W x 670H x 233D Protection classIP65 Warranty10 years  FAQs about the Deye SUN-12K-SG02LP1-EU hybrid inverterWhich battery types can be connected to the 12 kW inverter?The inverter is compatible with lithium-ion and lead-acid batteries and automatically adjusts its charging strategy to the appropriate BMS.Can the 1-phase inverter be operated in parallel?Yes, up to 16 devices can be connected in parallel for both grid-tied and off-grid systems.Which protection functions are integrated?The unit has overvoltage, short-circuit, island grid and overcurrent protection as well as integrated monitoring for PV strings and residual currents.Is the inverter also suitable for retrofits?Yes, thanks to AC and DC coupling, the SUN-12K-SG02LP1-EU is suitable for both new installations and for expanding existing PV systems.What warranty applies to the device?Deye offers a 10-year manufacturer's warranty. Scope of delivery: Deye SUN-12K-SG02LP1-EU 12 kW hybrid inverter 1-phase 1 x Deye SUN-12K-SG02LP1-EU inverterA single-phase hybrid inverter with 12 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall mount bracketA robust metal mounting rail for securely mounting the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT)An external clamp-on current transformer for measuring the energy flows at the house connection, required for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x operating manual (User Manual)A printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-16K-SG01LP1-EU is a robust hybrid inverter, ideally suited for use in private households and small businesses. It impresses with an AC output of 15 kW and ensures efficient and reliable energy supply, thanks to flexible battery utilisation as well as comprehensive safety features. The unit is suitable for both grid-connected and off-grid operation.Highlights at a glanceHigh performance: 15 kW nominal power, 16 kW peak powerFlexible operation: On-grid and off-grid use possiblePowerful battery integration: Max. charge/discharge current 250 A, compatible with 48 V low-voltage batteriesEfficient energy conversion: Max. efficiency 97.6%, 2 MPPTs for optimal PV utilisationUser-friendly: Colour touchscreen, integrated WLAN, control via appScalable: Parallel operation of up to 16 devices for larger projectsEfficient energy managementThe SUN-16K-SG01LP1-EU optimises PV energy self-consumption by prioritising direct use of electricity and storing surplus energy in batteries or feeding it into the grid. The battery can also be charged via a diesel generator, making it the ideal backup solution or suitable for remote off-grid sites.Flexible storage and system integrationThe system is suitable for a range of battery manufacturers thanks to its compatibility with 48 V low-voltage batteries and communication interfaces (RS485, CAN). Six programmable time windows for charging and discharging allow for intelligent management, even in conjunction with variable electricity tariffs.Maximum safety and reliabilityThe inverter guarantees safe and reliable operation under all conditions via IP65 protection rating, integrated safety mechanisms (overvoltage, short-circuit and anti-islanding protection) as well as compliance with international standards.Who is the Deye SUN-16K-SG01LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high energy demands and self-sufficiency requirementsSmall businesses with a need for continuous energy supplyOperators of off-grid systems with diesel generator integrationInstallations that should remain scalable through parallel operationProperties  ModelDeye SUN-16K-SG01LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)290 Max. discharge current (A)290 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)25600 Rated PV input voltage (V)500 Start voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)16000 Max. AC output power (W)17600 AC output nominal current (A)69.6 Max. AC current (A)76.5 Max. continuous AC throughput (A)100 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.5 Size (mm)527W x 700H x 294D Degree of protectionIP65 Warranty10 years  FAQs about the Deye SUN-16K-SG01LP1-EU Hybrid InverterWhich batteries is the 16 kW inverter compatible with?The inverter supports 48 V low-voltage batteries and is compatible with various manufacturers thanks to RS485 and CAN interfaces.Can the Deye inverter also be operated without a battery?Yes, the SUN-16K-SG01LP1-EU works both with and without battery storage.Is parallel operation possible?Up to 16 units can be operated in parallel, which allows for use in larger projects.How is the inverter system controlled?The control is conveniently done via a colour touchscreen directly on the device or via app using the integrated WLAN.What warranty does Deye offer?A manufacturer’s warranty of 10 years applies to the SUN-16K-SG01LP1-EU. Scope of delivery: Deye SUN-16K-SG01LP1-EU (16 kW 1-phase hybrid inverter) 1 x Deye SUN-16K-SG01LP1-EU inverterAn extremely powerful single-phase hybrid inverter with 16 kW output, integrated LCD colour touchscreen and support for 48 V low-voltage battery systems.1 x Wall Mount BracketA robust metal rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external clamp-on current transformer for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x installation kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x User Manual (operating instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.