Deye SUN-12K-SG02LP1-EU-AM3-P 12 kW hybrid inverter, single-phase

The Deye SUN-16K-SG01LP1-EU is a robust hybrid inverter, ideally suited for use in private households and small businesses. It impresses with an AC output of 15 kW and ensures efficient and reliable energy supply, thanks to flexible battery utilisation as well as comprehensive safety features. The unit is suitable for both grid-connected and off-grid operation.Highlights at a glanceHigh performance: 15 kW nominal power, 16 kW peak powerFlexible operation: On-grid and off-grid use possiblePowerful battery integration: Max. charge/discharge current 250 A, compatible with 48 V low-voltage batteriesEfficient energy conversion: Max. efficiency 97.6%, 2 MPPTs for optimal PV utilisationUser-friendly: Colour touchscreen, integrated WLAN, control via appScalable: Parallel operation of up to 16 devices for larger projectsEfficient energy managementThe SUN-16K-SG01LP1-EU optimises PV energy self-consumption by prioritising direct use of electricity and storing surplus energy in batteries or feeding it into the grid. The battery can also be charged via a diesel generator, making it the ideal backup solution or suitable for remote off-grid sites.Flexible storage and system integrationThe system is suitable for a range of battery manufacturers thanks to its compatibility with 48 V low-voltage batteries and communication interfaces (RS485, CAN). Six programmable time windows for charging and discharging allow for intelligent management, even in conjunction with variable electricity tariffs.Maximum safety and reliabilityThe inverter guarantees safe and reliable operation under all conditions via IP65 protection rating, integrated safety mechanisms (overvoltage, short-circuit and anti-islanding protection) as well as compliance with international standards.Who is the Deye SUN-16K-SG01LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high energy demands and self-sufficiency requirementsSmall businesses with a need for continuous energy supplyOperators of off-grid systems with diesel generator integrationInstallations that should remain scalable through parallel operationProperties  ModelDeye SUN-16K-SG01LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)290 Max. discharge current (A)290 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)25600 Rated PV input voltage (V)500 Start voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)16000 Max. AC output power (W)17600 AC output nominal current (A)69.6 Max. AC current (A)76.5 Max. continuous AC throughput (A)100 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.5 Size (mm)527W x 700H x 294D Degree of protectionIP65 Warranty10 years  FAQs about the Deye SUN-16K-SG01LP1-EU Hybrid InverterWhich batteries is the 16 kW inverter compatible with?The inverter supports 48 V low-voltage batteries and is compatible with various manufacturers thanks to RS485 and CAN interfaces.Can the Deye inverter also be operated without a battery?Yes, the SUN-16K-SG01LP1-EU works both with and without battery storage.Is parallel operation possible?Up to 16 units can be operated in parallel, which allows for use in larger projects.How is the inverter system controlled?The control is conveniently done via a colour touchscreen directly on the device or via app using the integrated WLAN.What warranty does Deye offer?A manufacturer’s warranty of 10 years applies to the SUN-16K-SG01LP1-EU. Scope of delivery: Deye SUN-16K-SG01LP1-EU (16 kW 1-phase hybrid inverter) 1 x Deye SUN-16K-SG01LP1-EU inverterAn extremely powerful single-phase hybrid inverter with 16 kW output, integrated LCD colour touchscreen and support for 48 V low-voltage battery systems.1 x Wall Mount BracketA robust metal rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external clamp-on current transformer for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x installation kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x User Manual (operating instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.

The Deye SE-G5.1Pro-B is a high-performance battery module with a storage capacity of 5.12 kWh, based on safe lithium iron phosphate (LiFePO4) technology. With its modular design, support for high-current applications and flexibility in installation, it is the ideal solution for modern energy storage systems in both domestic and commercial settings.Highlights at a glanceSafe & durable: Cobalt-free LiFePO₄ cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting & 19" rack Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith an individual capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a component in large-scale modular storage systems. Thanks to the ability to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is achievable. Perfect for applications with growing energy requirements. Automatic network addressing and support for firmware updates via USB or remote access significantly simplify commissioning and maintenance.Flexible mounting – space-saving & easy to installThanks to three mounting options—rack mounting (19-inch), wall mounting or floor installation—the module can be optimally positioned in almost any environment. With its compact design, measuring just 133 mm in height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and sustainable storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators & installers who value easy integration and low maintenance Sustainability-minded users who rely on environmentally friendly storage technology ModelDEYSE-G5.1 Pro-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)43.2-57.6 System capacity (kWh)5.12 System Usable Capacity (kWh)4.6 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - rated value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)150 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP rating of the enclosureIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)440 * 133 * 540 Weight (kg)45 Installation locationFloor mounting, rack mounting Recommended discharge depth90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3, IEC62619, CE, UK, VDE2510-50, CEI 0-21, FCC, UL1973, UL9540A  FAQs on the Deye SE-G5.1Pro-B battery storage systemHow much energy is actually usable?One module provides 5.12 kWh gross capacity, of which approximately 4.6 kWh is usable at a 90% depth of discharge; particularly suitable for residential and commercial applications.What are the applicable voltages and currents per module?The module operates at a nominal voltage of 51.2 V and has a capacity of 100 Ah. The continuous current is 50 A, with a peak current of up to 150 A possible for 10 seconds.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, corresponding to a total capacity of over 327 kWh. Common in domestic applications: six modules per tower, i.e. 30.7 kWh per unit.What is the module's lifespan?The cells achieve over 6,000 cycles at 90% DoD, with a residual capacity of at least 70% at end of life, meaning they are designed for long-term use.Which Deye inverters is the system compatible with?The battery is officially approved for all three-phase hybrid inverters in the SUN-xK-HP3 and SUN-xK-BM series and is fully plug-and-play compatible without the need for additional adjustments. We strongly recommend checking the compatibility list, as the manufacturer may make changes. Contents of delivery Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a a single, flexible low-voltage battery module for installation in 19-inch racks, wall mounting or floor-standing.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including an intelligent, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for securing the module in a 19-inch server rack.1 x set of battery connection cables (positive & negative)A pair of pre-assembled high-performance cables for connecting the module (or battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect this module’s power and data bus to another module.1 x earthing cableA protective earth cable for the correct earthing of the housing.1 x User and Installation GuideA printed manual describing the various installation types (rack, wall, stacking).2 x wall bracketsFor wall mounting the battery pack 4 x feetFor stacking and securing the battery

The Deye SUN-6K-SG05LP1-EU is a state-of-the-art and powerful single-phase hybrid inverter that functions as an intelligent hub for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency, and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar panels, the battery storage and the public power grid. Thanks to its integrated emergency power function, you are reliably supplied with high performance even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and mains consumption for maximum self-consumption.High performance: With 6 kW output, ideal for larger households, heat pumps or small businesses.Integrated emergency power supply: Provides uninterrupted power supply (UPS level) during mains failure.Two MPP trackers: Enables connection of two independent module fields, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage batteries.Comprehensive monitoring: Integrated Wi-Fi module for simple and intuitive system monitoring via app.Smart energy management for your homeThe Deye hybrid inverter is more than just a converter from DC to AC. It is the brain of your energy supply. During the day, it supplies your loads directly with solar power, while surplus energy is stored in your battery for use at night or on cloudy days. Only when the storage is full and no load needs electricity is the energy fed into the public grid. This way, you maximise your self-consumption and significantly reduce your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility in planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west sides of the roof) or with different module types. Each tracker optimises the output of its string individually, so you always achieve the maximum possible energy yield, even in complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. In the event of a failure of the public power grid, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerator or IT infrastructure with power from the battery storage. This UPS-level (Uninterruptible Power Supply) switching time ensures maximum supply reliability. Features  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-ion Battery voltage range (V)40~60 Max. charging current (A)140 Max. discharging current (A)140 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Nominal PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC nominal power and UPS power (W)6000 Max. AC output power (W)6600 AC output nominal current (A)27.3 Maximum AC output nominal current (A)30 Max. continuous AC throughput (A)40 Peak power (without grid)2 times nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short circuit protection, overload protection, and much more. Surge categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources at the same time. It acts as the interface between the solar panels, the battery storage and the public power grid. It intelligently decides whether the solar power generated is used directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger detached houses with higher electricity consumption, for example due to use of a heat pump or an electric vehicle. It is also suitable for small businesses or agricultural operations that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for use with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The full compatibility list can be found on the manufacturer's website.Do I need any additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). For use, the emergency loads to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external transfer switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW Single-Phase Hybrid Inverter) 1 x Deye SUN-6K-SG05LP1-EU inverterA high-performance single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for secure installation of the device on a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split current transformer for measuring energy flows at the property connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x Installation Kit (Screws and Plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams and important safety information.

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding use in residential and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in just one compact housing module, this storage system significantly minimises the space required and the installation effort.This model uses the proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.Highlights at a glanceMassive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunlight.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large loads such as heat pumps or wallboxes.Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, scaling up to 64 modules is even possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage system features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Longevity & efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operating life in daily use.Flexible installation: Despite the high weight, the housing system is extremely flexible and can be installed either on the wall, floor-standing or stacked.ApplicationsThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family houses: Maximises self-consumption of PV power and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.Commercial applications (C&I): Used to cap expensive peak loads (peak shaving) and stores large PV surpluses in agricultural or commercial businesses.Off-grid & stand-alone systems: Thanks to its gigantic capacity and high continuous discharge power, it offers a reliable energy source for completely off-grid properties.Installation & safety instructionsLogistics and weight: At a weight of 109 kg, the module is extremely heavy. Installation should обязательно be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of location: The storage system must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², in order to avoid overheating and voltage losses.Commissioning with parallel connection: If you connect several SE-F16 modules together, all units must be charged to exactly the same voltage level before cabling in order to prevent dangerous equalisation currents. Features  ModelDeye SE-F16 (C series with display) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Rated capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + app (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor mounting, wall mounting or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference lies in the capacity and the housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 11.8 kWh (230 Ah) offers and weighs approx. 84 kg. Both use the same 51.2V architecture and are designed for identical applications, but the F16 offers significantly more autonomy per installed module.What does the "C" in the designation SE-F16-C mean?The suffix "-C" in Deye storage systems indicates the extended model variant which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.Do I absolutely need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "Plug & Play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. With third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended to check the compatibility list, as changes may occur on the manufacturer side.

The Deye SE-F12 is a state-of-the-art low-voltage energy storage system (48V / 51.2V) designed for maximum reliability and performance in residential and commercial solar installations. With an impressive rated capacity of 11.8 kWh (approx. 230 Ah) in a single, compact housing, this storage unit offers an excellent balance of high energy density and proven safety.Thanks to the long-lasting lithium iron phosphate (LiFePO4) cell chemistry and the intelligent battery management system (BMS), the SE-F12 is the ideal choice for users who wish to maximise their self-sufficiency. The system’s enormous scalability also makes it a flexible and future-proof investment in your own energy independence.Highlights at a glanceHigh storage capacity (11.8 kWh): It offers a massive 230 Ah at a nominal voltage of 51.2 V in a single module, which drastically reduces the amount of cabling required compared to smaller 5 kWh blocks.Safe LiFePO4 technology: It uses lithium iron phosphate, the safest and most thermally stable cell chemistry on the market, with no risk of thermal runaway.Powerful power handling: Enables a maximum continuous discharge current of 230 A (approx. 11.5 kW output) and peak currents of up to 280 A for 10 seconds – ideal for large consumers such as heat pumps or electric car charging stations.Extreme scalability: The system scales with your requirements. Up to 32 units can be connected in parallel as standard (with a CAN-Bridge, up to 64 units for a storage capacity of up to 18 MWh).Smart monitoring: Equipped with LED status indicators as well as Bluetooth, RS485 and CAN2.0. Seamless integration in the Deye app enables precise real-time monitoring on your smartphone.Long service life: Certified for over 6,000 cycles (at 80 % depth of discharge / DoD), which corresponds to a service life of 15+ years with daily charging and discharging.Flexible installation: Certified to IP21, the housing supports both wall mounting and floor-standing (stacked) installation to make optimum use of space in the plant room.Areas of applicationThe Deye SE-F12 is extremely versatile and is primarily suitable for:Detached houses: To maximise self-consumption and as a robust emergency power storage solution in combination with hybrid inverters.Commercial systems (C&I): For peak shaving and the storage of large PV yields in agricultural or commercial operations.Off-grid systems: The high continuous load capacity easily serves stand-alone off-grid systems with large inrush currents.Installation & safety instructionsTransport and handling: With a weight of 84 kg the module is extremely heavy. Be sure to plan transport into the basement or plant room with two people or suitable lifting equipment (e.g. stair climber).Temperature management: The storage unit operates within a wide range (-20°C to 55°C during discharge), but should be installed in a frost-free, dry room (15°C to 25°C) for maximum service life and capacity yield. Charging below 0°C is blocked by the integrated BMS for safety reasons.Cable sizing: To transmit the enormous maximum continuous current of 230 A without voltage losses or dangerous heat build-up, high-quality battery cables with a cross-section of at least 70 mm² (better 95 mm²) between the storage unit and busbar or inverter are essential.Compatibility: The system "speaks" the Deye protocol natively and works best via Plug & Play with Deye low-voltage hybrid inverters (e.g. the SUN-10K or 12K-SG04LP3 series). Features  ModelDeye SE-F12 Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Rated capacity**230 Ah** Nominal energy**11.8 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 80% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + app connectivity Dimensions (W x D x H)approx. 400 x 232 x 583 mm Weightapprox. **84 kg** Installation typeFloor mounting, wall mounting or stacked  FAQs on the Deye SE-F12Can I use this battery with an inverter from another brand?In principle, yes. The Deye SE-F12 uses standard communication protocols (CAN/RS485) and can often also be operated with compatible third-party brands. However, the correct BMS protocol on the battery must be configured manually (via software or DIP switch). There is no support for this third-party use during setup from the manufacturer or retailer. A functioning system can only be guaranteed with the Deye own brand. Please compare the compatibility list in advance.What happens in the event of a power cut in the house?If you combine the SE-F12 with a hybrid inverter capable of emergency power supply (such as the Deye SG04 series), the system switches to battery operation within milliseconds in the event of a grid failure. Thanks to the high discharge power (up to 11.5 kW from just one battery), you can continue to supply even large 3-phase loads in the house grid without problems.Why do some shops list "SE-F12-C"?The suffix "-C" generally denotes the latest model revision (often the EU version), which is equipped with an integrated LCD display on the front of the housing. This allows cell voltages and SoC to be read directly. The pure performance data compared to the standard SE-F12 are identical.