Accessories

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency lights of the Mexcel M72 series. The battery pack consists of four robust NiMH cells in AAA size, which are assembled into a compact cube of 4. With a nominal voltage of 4.8 V and a capacity of 800 mAh, this battery ensures the standard-compliant emergency lighting duration of your safety lighting and offers maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency light series M72 and compatible models.Reliable NiMH technology: Offers high capacity and cycle stability for demanding emergency lighting operation.Compact cube design: The 2x2 arrangement of the AAA cells enables a space-saving installation in the luminaire.Pre-assembled ready for connection: Equipped with a suitable connection cable and JST plug for quick and error-free replacement.High quality: Use of high-quality industrial cells for a long service life and maximum operational safety.Reliable power for your safety lightingA working battery is the heart of every single-battery emergency light. This Beltrona replacement battery ensures that your safety and escape sign luminaires reliably provide the prescribed energy for the emergency lighting period (e.g. 3 hours) in the event of a power failure. It is the ideal choice for periodic replacement in office buildings, retail outlets, schools and other public institutions to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency lights. Compared to the outdated NiCd technology, it is more environmentally friendly as it does not contain heavy metals such as cadmium, and generally has a higher energy density. The cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for professional installers. The assembly as a compact cube, the precisely fitting cable and the standardised JST plug enable a quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency light is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 ApplicationEmergency light battery TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)800 Cell arrangementBar (4 cells in series) Dimensions (L x W x H in mm)approx. 100 x 29 x 15 ConnectionCable with Molex plug Weight (g)approx. 110  FAQs about the replacement battery for emergency lightsHow do I recognise when the battery in an emergency light needs replacing?Modern emergency lights with autotest function usually indicate a defective or depleted battery by a status LED (e.g. via red flashing). At the latest, if the light no longer passes the annual endurance test for the full emergency lighting period, the battery must be replaced immediately. The typical lifespan of a NiMH battery in this application is approximately 4 years.Why is it important to use the exactly matching plug?The JST plug is a widely used standard in electronics. Using the appropriate pre-assembled plug ensures a polarity-safe and electrically flawless connection to the luminaire electronics. DIY solutions using screw terminals or adhesive tape are not permitted in safety-relevant systems.Can I replace this battery with one with a higher capacity (mAh)?As a rule, this is possible as long as the voltage (4.8V), technology (NiMH) and design are identical. A higher capacity will result in a longer emergency lighting period. However, you must ensure that the battery physically fits into the luminaire housing.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge at collection points in retail or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly recycling.

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency lights of the Mexcel M72 series. The battery pack consists of four robust NiMH cells in AAA size, which are configured into a slim column of 4. With a nominal voltage of 4.8 V and a capacity of 600 mAh, this battery ensures the standard-compliant emergency lighting duration of your safety lighting and offers maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency light series M72 and compatible models.Reliable NiMH technology: Offers high cycle strength for demanding emergency lighting operation.Slim column design: The 4x1 arrangement of the AAA cells enables a precise installation in elongated battery compartments.Ready for connection: Equipped with a suitable connection cable and JST plug for a quick and error-free replacement.High quality: Use of high-quality industrial cells for a long service life and maximum operational safety.Reliable energy for your safety lightingA functioning battery is the heart of every single-battery emergency light. This Beltrona replacement battery ensures that your safety and escape sign lights provide the prescribed energy for the emergency lighting duration (e.g. 1 or 3 hours) in the event of a power failure. It is the ideal choice for periodic replacement in office buildings, shops, schools and other public institutions to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency lights. Compared to the outdated NiCd technology, it is more environmentally friendly, as it contains no heavy metals such as cadmium, and generally has a higher energy density. The cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for the specialist. The configuration as a slim column, the precisely fitting cable and the standardised JST plug ensure a quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency light is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 ApplicationEmergency light battery TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)600 Cell configurationBar (4 cells in series) Dimensions (L x W x H in mm)approx. 58 x 29 x 15 ConnectionCable with Molex connector Weight (g)approx. 85  FAQs about the replacement battery for emergency lightsHow can I tell that the battery in an emergency light needs to be replaced?Modern emergency lights with autotest function usually indicate a defective or exhausted battery via a status LED (e.g. by flashing red). At the latest, if the light no longer passes the annual endurance test over the full emergency lighting duration, the battery must be replaced immediately. The typical service life of a NiMH battery in this application is approx. 4 years.Why is it important to use the exact matching plug?The JST plug is a widely used standard in electronics. Using the appropriate, pre-assembled connector ensures a polarity-proof and electrically flawless connection to the light's electronics. Do-it-yourself solutions with screw terminals or adhesive tape are not permitted in safety-related installations.Can I replace this battery with one with a higher capacity (mAh)?As a rule, this is possible as long as the voltage (4.8V), the technology (NiMH) and the design (4-column) are identical. A higher capacity results in a longer emergency lighting duration. However, you must ensure that the battery physically fits into the housing of the light.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used appliance battery, you can return it free of charge to collection points in retail or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency luminaires of the Mexcel M72 series, which are designed for an emergency lighting duration of 8 hours. The battery pack consists of four high-capacity and robust NiMH AA-size cells, assembled into a compact 4-cell cube. With a nominal voltage of 4.8 V and a high capacity of 2200 mAh, this battery ensures standard-compliant, extended emergency lighting duration for your safety lighting, providing maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency luminaire series M72 with 8 hours operating time.High capacity: 2200 mAh to meet the requirement for 8-hour emergency lighting autonomy.Reliable NiMH technology: Offers high cycle stability for demanding emergency lighting operation.Compact cube design: The 2x2 arrangement of the AA cells allows space-saving installation in the luminaire.Ready-to-connect assembly: Equipped with a suitable connection cable and JST plug for fast and error-free replacement.Reliable power for your safety lightingA functioning battery is the heart of every single-battery emergency luminaire. This Beltrona replacement battery ensures that your safety and escape sign luminaires reliably provide the prescribed, extended power for 8 hours in the event of a power failure. It is the ideal choice for routine replacement in buildings with special safety requirements such as accommodation facilities, places of assembly or high-rise buildings, to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency luminaires. Compared to the outdated NiCd technology, it is more environmentally friendly as it contains no heavy metals such as cadmium, and has a higher energy density. The high-capacity AA cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for the professional installer. The compact cube assembly, the precisely fitting cable and the standardised JST plug enable quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency luminaire is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 (8h) ApplicationEmergency luminaire battery (8 hours) TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)2200 Cell arrangementBlock (2x2 cells) Dimensions (L x W x H in mm)approx. 58 x 52 x 15 ConnectionCable with Molex plug Weight (g)approx. 115  FAQs about the replacement battery for emergency luminairesHow can I tell if the battery in an emergency luminaire needs to be replaced?Modern emergency luminaires with autotest function usually signal a defective or exhausted battery via a status LED (e.g. by red flashing). At the latest, if the luminaire no longer passes the annual endurance test over the full emergency lighting duration, the battery must be replaced immediately. The typical service life of a NiMH battery in this application is approx. 4 years.In which cases is an emergency lighting duration of 8 hours required?An extended emergency lighting duration of 8 hours is often required in buildings with special risks or regulations. These include, for example, accommodation facilities (hotels), high-rise buildings, large places of assembly or workplaces with special hazards, to ensure safe evacuation even over a longer period of time.Can I use this battery in a luminaire for 3 hours emergency lighting duration?Technically, this is often possible if the battery fits physically. The luminaire would then achieve a significantly longer autonomy time than required. However, it is always recommended to use the battery type specified by the luminaire manufacturer for the respective model (3h or 8h) to ensure optimal function of the charging and monitoring electronics.How must this battery be disposed of?Batteries must not be disposed of in household waste. As waste device batteries, you can return them free of charge to collection points in retailers or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

The M16 light module M72 is a self-sufficient and highly flexible lighting unit that has been developed for professional integration into furniture, machines and mobile systems. It combines an intelligent control board (M72), a long-life lithium iron phosphate (LiFePO4) battery and a high-intensity LED strip to create a compact and ready-to-install complete solution. Thanks to the versatile mounting options (except wall mounting), the module is perfect as low-maintenance cabinet lighting, machine lighting or safety lighting.Highlights at a glanceSelf-sufficient complete solution: Integrated unit consisting of control, high-performance battery and LED strip.Long-life LiFePO4 technology: Offers maximum cycle stability, long service life and maximum operational safety.Flexible mounting options: Suitable for installation, assembly and integration into various materials and objects.High light output: Modern LED technology for bright and even illumination.Low-maintenance operation: The robust LFP battery technology ensures reliable operation for years without battery replacement.Versatile lighting for professional applicationsThe M16 light module is designed as a versatile "fit-and-forget" solution. It is ideal for use as interior lighting in high-quality cabinets, showcases and sales displays where wireless installation is required. In industry, it serves as a status indicator or maintenance-free workplace lighting directly on machines. Other applications can be found in motorhomes, boats or as emergency lighting in technical installations that require a light source independent of the main power supply.Superior and safe LiFePO4 battery technologyThe heart of the module is the integrated lithium iron phosphate (LiFePO4) battery. This battery technology is considered the safest and most durable in the lithium-ion sector. It offers an extremely high number of charge and discharge cycles (several thousand), is thermally stable and intrinsically safe, minimising the risk of fire. Compared to conventional lithium or lead batteries, it offers a significantly longer service life and more reliable operation.Developed for seamless integrationThe M72 control board manages the charging and discharging process of the battery and ensures efficient operation of the LED strip. The entire module is designed for easy integration. It can be embedded in cut-outs, screwed onto surfaces or fastened with retaining clips. The compact design and self-sufficient power supply enable clean, cable-free installation in a wide range of demanding projects. Features  ModelM16 light module M72 General module data ApplicationEmergency lighting, signal light Protection classIP67 Dimensions (L x W x H in mm)approx. 250 x 50 x 30 Weight (g)approx. 450 Integrated battery TechnologyLiFePO4 Rated voltage (V)12.8 Capacity (Ah)2.5 ProtectionIntegrated BMS LED strip Light colourNeutral white (4000K) Luminous flux (lumen)approx. 300  FAQs about the M16 light module M72What does "self-sufficient complete solution" mean?Self-sufficient means that the light module already contains all the necessary components for operation (control, battery, light) and can be operated independently of a permanent external power supply. The integrated battery is charged as required and supplies the LEDs.Why is a LiFePO4 battery used?Lithium iron phosphate (LFP/LiFePO4) is the safest lithium-ion technology. It is extremely cycle-resistant (durable), thermally stable (no "thermal runaway") and does not require rare raw materials such as cobalt. It is the ideal choice for fixed, low-maintenance systems such as this module.What does "all mounting types except wall mounting" mean?This means that the module is designed for integration in or on objects. Typical examples are milling into a wooden panel (installation), screwing onto machine panelling (surface mounting) or fixing with clips in a profile (integration). It is not intended as a stand-alone luminaire mounted on a building wall.How is the module charged?The module is charged via a dedicated charging port with a suitable power supply unit or charging circuit. The exact specifications for the charging voltage and charging current are defined in the technical data sheet of the product. The integrated M72 board controls and protects the charging process.

This pictogram set from Beltrona has been specially developed for use with the M7250x series emergency exit sign luminaires. It provides the necessary flexibility to precisely adapt escape route signage on site to structural conditions. The set includes five high-quality, self-adhesive films with the standard-compliant escape symbols and a blank film to ensure professional and unmistakable marking in accordance with current regulations.Highlights at a glancePerfect fit for M7250x series: Precisely tailored for the pictogram panels of the M7250x luminaire series.Comprehensive set: Includes pictograms for all four directions (left, right, up, down) as well as a blank film.Standard-compliant symbols: All pictograms comply with internationally recognised ISO 7010 standards for escape signs.High-quality standard: Durable and resistant film for consistently clear visibility.Easy to use: The self-adhesive films enable quick, clean and bubble-free application.Flexible and standard-compliant escape route markingThis pictogram set is an essential accessory for electrical installers and facility managers. It allows the escape direction to be flexibly and definitively determined directly during the installation of the luminaire. Instead of having to stock different luminaires for each direction, this set offers a universal solution. The blank foil is used to cover one side of a double-sided luminaire when it is installed at the end of an escape route or on a wall and should only point in one direction.Durable materials for long-lasting safetyThe pictograms are printed onto a high-quality, translucent polyester film which ensures optimal and even backlighting by the LED luminaire. The material is scratch-resistant, resistant to ageing and easy to clean. This ensures that the recognisability of the escape symbols is maintained throughout the entire service life of the emergency lighting system.Developed for simple and professional installationThe set has been optimised for professional use. The pictograms can easily be detached from the backing and stuck to the clear acrylic or polycarbonate panel of the luminaire. The strong adhesive ensures a permanent hold without peeling or sliding, while the material properties enable bubble-free application. Features ModelBeltrona pictogram set for M7250x series ApplicationEscape route marking CompatibilityMexcel emergency luminaire series M7250x Contents of the set1x left arrow, 1x right arrow, 1x down arrow, 1x blank cover MaterialAcrylic glass (printed) Mounting typeAttachable / insertable Dimensions (W x H in mm)approx. 250 x 125 Detection distance (m)approx. 25  FAQs about the pictogram setWhy do I need a separate pictogram set?A separate set offers maximum flexibility on site. The final direction of the escape routes is often only clear during installation. With this set, the installer can individually adapt each luminaire to the circumstances without having to carry different luminaire variants with fixed printed pictograms.What is the blank film used for?Escape sign luminaires are often designed for dual-sided display (e.g. for installation in the centre of a corridor). However, if such a luminaire is installed on a wall or at the end of an escape route, the pictogram must only be visible in one direction. The white, opaque blank film is stuck to the side not required to cover it and avoid misinterpretation in an emergency.Do the pictograms comply with current regulations?Yes, all included pictograms are based on the internationally harmonised ISO 7010 standard. These symbols are standardised throughout Europe (and beyond) to ensure intuitive and language-independent understandability of escape guidance.How do I correctly apply the films?For optimum adhesion and appearance, the pictogram panel of the luminaire should be clean, dry and free from grease prior to application. Peel the film from the backing, position it carefully on the panel and smooth from the centre outwards to avoid air bubbles.