Inverter

The Deye SUN-12K-SG01HP3-EU-AM2 is a powerful, three-phase high-voltage hybrid inverter designed as a highly efficient energy management system for demanding photovoltaic systems. With a nominal output power of 12 kW it offers sufficient reserves for modern households with high electricity requirements, electric cars and heat pumps.The main feature of the AM2 series is the support of High-voltage battery systems. Operating in the voltage range of up to 700 V minimises conversion losses and significantly increases system efficiency compared to low-voltage systems. The device also enables a fully-fledged, three-phase backup power supply with extremely fast switchover times.Highlights at a glanceHigh-voltage efficiency: Supports battery voltages from 160 V to 700 V, which enables thinner cable cross-sections and higher efficiency.Genuine 3-phase emergency power: In the event of a power failure, continues to supply the entire domestic grid with three-phase power and is 100% unbalanced load capable.High PV input power: Enables the connection of up to 15.6 kWp photovoltaic power for fast battery charging and direct load supply.Smart Load & Generator-Port: A flexible output for the intelligent control of consumers (e.g. hot water) or for integrating a diesel generator.Fast UPS function: With a switching time of less than 4 ms, IT devices and household appliances remain in operation without interruption.Robust IP65 design: Dust and waterproof housing, ideal for installation in basements, garages or protected outdoor areas.Colour touchscreen: Intuitive configuration and monitoring of all energy flows directly on the device via an LCD display.Areas of applicationModern detached housesPerfect for combining with heat pumps and wallboxes to maximise self-consumption.Commercial PV systemsProtection of critical three-phase loads (e.g. cold stores or workshop machines) in the event of a power failure.Retrofitting (AC coupling)Can be integrated into existing PV systems as a storage retrofit without having to replace the old inverter.Assembly & safety instructionsBattery compatibilityThis inverter requires a high-voltage storage system. Please refer to the certified compatibility list (e.g. Deye BOS-G or BYD HVS/HVM).Fire protection & locationInstall the inverter on a non-flammable surface. Ensure a minimum distance of 50 cm from ceilings and floors for optimum circulation.Overvoltage protectionThe device has integrated DC and AC surge arresters (type II). Additional external protection in accordance with local regulations is recommended. Properties ModelDeye SUN-12K-SG01HP3-EU-AM2 Nominal output power12 kW (12,000 watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) lithium-ion Battery voltage range160 V – 700 V Number of MPP trackers2 MPPT Max. Efficiency97,60 % Protection classIP65 (dust and waterproof) Special featureBlack start capable & smart load function  FAQs about the Deye SUN-12K-SG01HP3-EU-AM2Can the inverter be operated in parallel?Yes, up to 10 devices. Thanks to the parallel connection, both the total output power and the storage capacity can be modularly adapted to growing requirements.Does the device support zero feed-in?Yes, precisely controllable. Using the enclosed smart meter, the inverter can be configured so that no energy flows into the public grid (zero export).Is the monitoring module included?Yes, a WLAN stick as standard. The LSW-3 data logger, which connects the system to the Solarman cloud and enables remote monitoring via app, is usually included in the scope of delivery. Scope of delivery: Deye SUN-12K-SG01HP3-EU-AM2 – 12 kW / 3-phase hybrid inverter (high-voltage) 1 x Deye SUN-12K-SG01HP3-EU-AM2 inverterA three-phase high-voltage hybrid inverter with 12 kW output, integrated LCD touchscreen and two MPPT trackers.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT - Current Transformer)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (User Manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-8K-SG01HP3-EU-AM2 is a highly efficient, three-phase high-voltage hybrid inverter specifically developed for maximising self-consumption in demanding residential buildings. With a rated power of 8 kW it forms the ideal interface between the photovoltaic system, high-voltage battery storage and the public power grid.The device is distinguished by its high-voltage battery support, which enables higher efficiency with lower line losses compared to low-voltage systems. It also offers a full backup power function which, in the event of a power failure, creates a genuine three-phase off-grid network and continues to power critical loads without interruption.Highlights at a glanceHigh-voltage battery system: Supports battery voltages from 160 V to 700 V, which significantly increases the efficiency of charging and discharging operations.Genuine 3-phase backup power: Provides a complete emergency power supply with 100% unbalanced load capability for all three phases in the event of a mains failure.DC and AC coupling: Flexibly deployable for planning new systems or to expand existing PV systems with a powerful storage unit.Intelligent load management: The "Smart Load" port allows targeted control of loads such as heat pumps or immersion heaters in the event of excess solar power.Fast UPS function: With a switchover time of less than 4 ms, even sensitive electronic devices such as PCs or servers remain in operation without interruption.2 MPPT trackers: Enables connection of two independently operating module strings, ideal for different roof orientations.Robust IP65 housing: Dust and splash-proof, certified for installation indoors as well as in protected outdoor areas.Areas of applicationModern detached housesPerfect for households with an electric car and heat pump, to use solar energy efficiently themselves and minimise electricity costs.Backup systems & UPSReliable safeguarding of the entire house installation against power failures thanks to powerful backup power management.Small commercial systemsUsed in small offices or workshops for reducing operating costs and safeguarding critical IT infrastructure. Installation & safety instructionsBattery compatibilityThis inverter strictly requires a high-voltage storage unit. Please check compatibility in advance with systems such as Deye BOS-G or similar high-voltage solutions.Cooling & clearancesEnsure there is sufficient air circulation. It is recommended to keep a minimum clearance of 50 cm above and below and 30 cm to the sides.Integrated protectionThe device has integrated lightning protection (type II) for DC and AC as well as a DC isolator for safe system maintenance. Features ModelDeye SUN-8K-SG01HP3-EU-AM2 Rated output power8.0 kW (8,000 watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-Ion battery Battery voltage range160 V – 800 V Number of MPP trackers2 MPPT Max. efficiency97.60 % Protection ratingIP65** (Weather resistant) Special featureBlack start capable & Smart Load  FAQs about the Deye SUN-8K-SG01HP3-EU-AM2Can I connect the inverter in parallel?Yes, up to 10 devices. By connecting in parallel, both total output power and battery capacity can be expanded modularly to meet increasing energy demands.Does the device support zero feed-in?Yes, fully configurable. With the included smart meter or external CT clamps, the inverter can be regulated so that no energy flows into the public grid.Is the WLAN monitoring module included?Yes, standard with a WLAN logger. Usually, the LSW-3 stick is included in the delivery, enabling connection to the Solarman Cloud to conveniently monitor the system via app. Scope of delivery: Deye SUN-8K-SG01HP3-EU-AM2 (8 kW HV hybrid inverter) 1 x Deye SUN-8K-SG01HP3-EU-AM2 inverterA three-phase high-voltage hybrid inverter with 8 kW output, integrated LCD touchscreen and two MPPT trackers.1 x Wall Mount BracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communications module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clamp-on current transformers for measuring the power flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty wall plugs for the proper installation of the wall bracket.1 x user manual (Operating Instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.

The Deye SUN-10K-SG02LP1-EU-AM3-P is an extremely powerful, single-phase hybrid inverter of the latest generation, specially developed for demanding low-voltage photovoltaic systems. With a rated output power of 10 kW it is one of the most powerful single-phase devices on the market and enables significant optimisation of self-consumption as well as an uninterrupted emergency power supply for large single-phase domestic grids or specific load groups.The abbreviation "P" stands for the support of high-current PV modules, which allows the connection of modern panels with high currents (up to 26 A per MPPT). It works with 48 V low-voltage batteries together and offers an excellent performance with its high charging and discharging capacity of up to 220 A for the management of large battery storages.Highlights at a glanceEnormous 10 kW single-phase power: Ideal for large households or commercial applications with a single-phase structure requiring high load coverage.High current inputs (26 A): Perfectly matched to the latest generation of PV modules with large cell formats and high short-circuit currents.48 V low-voltage system: Full compatibility with cost-effective and modularly expandable 48 V battery storage systems (e.g. LiFePO4 from Deye or Pylontech).220 A charging/discharging current: Enables extremely fast charging of the storage unit in high sunlight and the supply of large consumers from the battery.Full UPS function: Switches to stand-alone mode in less than 4 ms in the event of a mains failure, so that even sensitive electronics continue to run without interruption.Three MPPT trackers: Offers maximum flexibility in roof occupancy and optimises yield with different alignments or partial shading.AC coupling & Smart Load: Existing inverters can be easily integrated; surpluses can also be specifically used for heat pumps or immersion heaters.Areas of applicationLarge single-phase house gridsMaximum independence by storing large amounts of energy in cost-effective 48 V batteries.Off-Grid & stand-alone solutionsThanks to its high output of 10 kW, the device is ideal for autonomous systems in remote areas.Retrofitting & ExpansionCan be installed in parallel with existing string inverters thanks to AC coupling to retrofit a storage system.Installation & Safety instructionsHigh battery currentsWith a discharge current of up to 220 A, it is essential to use massive cable cross-sections (e.g. 2x 50 mm² or 70 mm²) and corresponding high-current fuses.Thermal managementDespite its high efficiency, there is heat dissipation at 10 kW output. Ensure a mounting location with good air circulation and keep to the minimum distances.Phase coupling in the homeWhen installing in a German 3-phase grid, please observe the unbalanced load regulation (max. 4.6 kVA phase difference to the grid), unless a phase-balancing measurement or a zero feed-in setup is used. Features ModelDeye SUN-10K-SG02LP1-EU-AM3-P Rated output power**10 kW** (10,000 Watt) Phases**1-Phase** (230V) Battery type**Low voltage (LV)** 48V Li-Ion / Lead Number of MPP trackers**3 MPPT** Max. PV input power**13,000 Watt** (13 kW) Max. charging/discharging current**220 A** Protection rating**IP65** (Weatherproof) Special featureSupports **Smart Load** & AC-coupling  FAQs on the Deye SUN-10K-SG02LP1-EU-AM3-PCan I supply a 3-phase house with this single-phase device?Yes, by using net metering. The inverter feeds into one phase. A smart meter installed at the grid connection point ensures that the consumption of the other two phases is arithmetically balanced (net metering), so that the electricity meter effectively remains at zero.How many batteries can I connect?Virtually unlimited. Thanks to the 48 V system, many battery modules can be connected in parallel. The inverter communicates via CAN or RS485 with the master battery management system (BMS).Is the device suitable for outdoor use?Yes, thanks to IP65. The housing is dustproof and protected against water jets. Nevertheless, it is recommended to install it in a shaded place to extend the service life of the electronics by reducing thermal stress.

The Deye SUN-8K-SG05LP1-EU-AM2-P is a high-performance, single-phase hybrid inverter that has been specially developed to meet the requirements of modern households with high energy demands. With an impressive rated output power of 8 kW it is one of the most powerful single-phase devices in its class and enables comprehensive self-consumption optimisation as well as a seamless emergency power supply.The "P" series is optimised for the use of high-current PV modules. Thanks to an increased input current of up to 26 A per MPPT, state-of-the-art solar panels with large cell formats and high yields can be efficiently integrated. As a low-voltage hybrid, the unit works together with 48 V batteries, allowing flexible and cost-effective scaling of the storage system.Highlights at a glanceEnormous 8 kW single-phase power: Ideal for households with large loads that require a strong single-phase system or high charging capacity for batteries.High-current PV inputs (26 A): Perfectly matched to the latest generation of high-performance modules to maximise solar yield.48 V low-voltage system: Full compatibility with a wide range of affordable and modularly expandable 48 V battery storage (e.g. LiFePO4 from Deye or Pylontech).Massive charging/discharging current (190 A): Enables fast charging of large storage capacities and the supply of power-hungry devices directly from the battery.Real emergency power output (UPS): Switches to off-grid operation in less than 4 ms in the event of a mains failure, so even sensitive electronics are protected without interruption.2 MPPT trackers: Offers flexibility in roof coverage and optimises yield for different orientations or partial shading.Smart Load & AC-Coupling: Surplus energy can be specifically used for consumers such as heat pumps; existing inverters can also be easily integrated.Areas of applicationLarge detached housesMaximising autonomy by combining high PV power with large, affordable 48 V storage systems.Backup & stand-alone solutionsThanks to the high output power of 8 kW, it is excellently suited for standalone systems or for the complete protection of critical phases in regions with an unstable grid.Retrofitting (Retrofit)Can be installed in parallel to already existing PV systems via AC coupling to extend them with a powerful storage function.Assembly & safety instructionsBattery wiringDue to the 48 V technology and currents up to 190 A, large cable cross-sections (e.g. 2x 50 mm² or 70 mm²) and a high-quality DC fuse are absolutely essential.VentilationThe unit features active fan cooling. Install the inverter in a cool, well-ventilated area and maintain the specified minimum clearances.Phase balancingFor use in a 3-phase grid (e.g. Germany) a smart meter is required at the grid feed-in point, to mathematically balance the consumption of all phases. Properties ModelDeye SUN-8K-SG05LP1-EU-AM2-P Rated output power8.0 kW (8,000 Watts) Phases1-phase (230V) Battery typeLow voltage (LV)** 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charging/discharging current190 A Max. efficiency97.60 % Degree of protectionIP65 (Weatherproof) Special featureColour touch display & Smart Load  FAQs for Deye SUN-8K-SG05LP1-EU-AM2-PCan I operate a heat pump with this unit?Yes, easily. Thanks to the high output power of 8 kW and the smart load function, the inverter can be configured so that it preferentially supplies the heat pump with surplus solar energy.Is operation possible without a battery?Yes, the unit will also start without storage. The inverter can be used as a pure PV inverter. A 48 V storage can be added later at any time via plug-and-play to increase self-consumption.Does the unit support zero feed-in?Yes, via the supplied sensor. By means of the CT clamp or a smart meter, the feed-in into the public grid can be limited to 0 watts (zero export). Scope of delivery: Deye SUN-8K-SG05LP1-EU-AM2-P (8 kW 1-phase hybrid inverter) 1 x Deye SUN-8K-SG05LP1-EU-AM2-P inverterA powerful single-phase hybrid inverter with 8 kW power, integrated colour LCD touch screen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for securely attaching the unit to a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split-core current transformer for measuring energy flows at the house feed-in point, required for zero feed-in and self-consumption optimisation.1 x set of battery connection cables (DC cables)A pair of pre-terminated high-performance cables for direct electrical connection of a 48V battery (specific for this "P"-bundle version).1 x set of PV connectors (MC4 compatible)The necessary pairs of DC connectors (plus and minus) for connecting PV strings to the inverter.1 x communication cable (BMS)A pre-terminated RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x user manualA printed manual with detailed installation instructions, circuit diagrams and safety-related information.

The Deye SUN-6K-SG05LP1-EU is an ultra-modern and powerful single-phase hybrid inverter that acts as an intelligent control centre for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar modules, the battery storage system and the public grid. Thanks to its integrated emergency power function, you are reliably supplied with high power even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and grid consumption for maximum self-consumption.High performance: With 6 kW output power ideal for larger households, heat pumps or small commercial operations.Integrated emergency power supply: Provides an uninterruptible power supply (UPS level) in the event of a grid failure.Two MPP trackers: Enables the connection of two independent module arrays, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage battery storage systems.Comprehensive monitoring: Integrated WLAN module for simple and intuitive system monitoring via app.Intelligent energy management for your homeThe Deye hybrid inverter is more than just a converter from direct current to alternating current. It is the brain of your energy supply. During the day, it supplies your consumers directly with solar power, while surplus energy is stored in your battery storage system for the night or for cloudy days. The energy is only fed into the public grid when the storage system is full and no consumer requires electricity. This maximises your self-consumption and significantly reduces your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility when planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west side of the roof) or with different module types. Each tracker optimises the output of its string individually so that you always achieve the maximum possible energy yield, even with complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. If the public power grid fails, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerators or the IT infrastructure with power from the battery storage system. This switchover time to UPS level (uninterruptible power supply) ensures maximum security of supply. Characteristics  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-lon Battery voltage range (V)40~60 Max. Charging current (A)140 Max. Discharge current (A)140 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)7800 Rated PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC rated power and UPS power (W)6000 Max. AC output power (W)6600 Rated AC output current (A)27.3 Maximum rated AC output current (A)30 Max. Continuous AC throughput (A)40 Peak power (without grid)2-fold rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0.5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short-circuit protection, overload protection, and much more. Overvoltage categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 RATING Installation styleWall bracket Guarantee10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources simultaneously. It is the link between the solar modules, the battery storage system and the public grid. It decides intelligently whether the solar power generated is consumed directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger single-family homes with a higher power consumption, for example due to the operation of a heat pump or an electric car. It is also suitable for small businesses or farms that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for operation with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The exact compatibility list can be found on the manufacturer's website.Do I need additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). To use it, the emergency power consumers to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external changeover switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW 1-phase hybrid inverter) 1 x Deye SUN-6K-SG05LP1-EU InverterA powerful single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x current transformer (CT)An external folding current transformer for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4 compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x User manualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-14K-SG05LP3-EU-SM2 is the perfect solution for high-performance, scalable solar systems. With its high charging performance and variable battery options, it is ideal for hybrid energy supply systems in homes and businesses.Highlights at a glanceEfficient performance: 14 kW rated power for diverse applications Flexible battery compatibility: Use with lead-acid or lithium-ion High current flow: Charge/discharge current up to 260A Expandable: Parallel connection of up to 10 devices Weatherproof: IP65 for outdoor and indoor applicationsReliable energy for every phaseThe SUN-14K-SG05LP3-EU-SM2 from Deye is a three-phase hybrid inverter with 14 kW rated power. Thanks to asymmetric load distribution, each phase can deliver up to 50% of the total output – ideal for uneven loads.High compatibility and scalabilityThe inverter works with 48V low-voltage batteries and supports both lead-acid and lithium-ion technology. Up to ten units can be operated in parallel – perfect for growing energy needs.Safe and connectedThe integrated protection mechanisms, including DC reverse polarity protection and AC short-circuit protection, ensure stable operation. With optional GPRS, WiFi, Bluetooth, 4G, or LAN, the device can be flexibly integrated into monitoring systems.Who is the Deye SUN-14K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:Homeowners with medium to high energy needs looking to optimise their self-consumptionBusinesses seeking a scalable solution for energy supply and peak load managementOperators of existing PV systems planning to retrofit with battery storageUsers needing diesel generator support who require a hybrid and fail-safe power supply  ModelSUN-14K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)260A Max. Discharging current (A)260A Charging strategy for Li-Ion batterySelf-adaptation to BMS Number of battery inputs2 PV string input data Max. DC input power (W)21000W Max. DC input voltage (V)800V Start voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. operating PV input current (A)36+20A Max. input short-circuit current (A)54+30A Number of MPP Trackers/Number of strings per MPP Tracker2/2+2 AC input/output side Rated AC input/output active power14000 Max. AC input/output apparent power14000 AC input/output rated current (A)21.3/20.3 Max. AC input/output current (A)21.3/20.3 Max. continuous AC passthrough (grid to charge)70 Peak power (without grid)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 lagging Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output grid frequency/range (Hz)50/45-55, 60/55-65 Form of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current feed-in<0,5% In Efficiency Max. efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation monitoring, DC component monitoring, earth fault current monitoring, grid monitoring, anti-islanding protection, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Degree of protectionIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (W x H x D mm)456×750×268.5 (without connectors and brackets) Weight (kg)50.6 Cooling modeIntelligent cooling Warranty5-year/10-year warranty period depends on inverter installation conditions. For details, please see the general warranty conditions Grid controlIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the 14 kW Deye Sun Hybrid InverterDoes the inverter meet all standards required in Germany and will my grid operator accept it without additional equipment?Yes, the Deye SUN-14K fully meets the VDE-AR-N 4105 standard. A separate NA protection device is therefore not required. A current certificate from 2024 also confirms conformity with the FNN transitional solution. International grid codes such as G99 (UK), CEI 0-21 (IT) and EN 50549 (EU) are also covered.Which 48 V batteries is the inverter compatible with and what charge/discharge currents are possible?The SUN-14K is compatible with many common 48 V LiFePO₄ batteries. Deye provides a regularly updated compatibility list with RS485/CAN profiles and dip switch information. The permissible voltage range is 40–60 V DC. According to the manufacturer, charging and discharging currents of up to 260 A are possible – ideal for high-performance low-voltage storage.How large can/should my PV generator power be for the 14 kW inverter to work optimally?The device allows up to 28 kW DC input, i.e. about 200% oversizing. For east/west roofs with approx. 15 kWp, experts recommend a DC/AC ratio of about 1.07. This makes the SUN-14K the ideal choice for PV fields between 15 and 20 kWp.How loud is the operation?The noise level is ≤ 55 dB (A), comparable to a quiet dishwasher. The fans only start at higher temperatures (~50 °C).Does the inverter support three-phase emergency power supply, import limiting, and remote maintenance?Yes, the SM2 series from Deye offers true three-phase backup operation. Firmware updates, monitoring, and remote maintenance are possible via app or web portal. A factory import limit of 20 W is set – zero feed-in strategies can be implemented via Modbus. The WiFi, RS485, and CAN interfaces enable integration into systems such as Solar-Assistant or ioBroker.Scope of delivery:1x hybrid inverter1x wall bracket 4x stainless steel collision protection screw M8x801x parallel communication cable1x L-type hexagon key1x battery temperature cable1x magnetic ring for battery cable1x magnetic ring for BMS communication cable1x user manual1x Wi-Fi plug3x sensor terminal

The Deye SUN-80K-SG02HP3-EU-EM6 is a three-phase high-performance hybrid inverter for large photovoltaic projects in commercial and industrial environments. With up to 80 kW rated output, high-voltage battery support and comprehensive protection functions, it guarantees maximum efficiency, flexibility and operational safety, both in grid operation and off-grid.Highlights at a glanceHigh performance: 80 kW rated output, up to 88 kVA peak outputFlexible battery usage: High-voltage batteries (160–1000 V), max. charging/discharging current 160 AParallel connection: Up to 10 units for large-scale projects (on-grid & off-grid)Efficient PV integration: Max. PV input power 160 kW, up to 12 MPP trackersIntelligent control: 6 programmable time windows for charging/dischargingNetworked & controllable: Communication via RS485, RS232, CAN, optional WLAN/GPRS/4GEfficient High-Performance Energy ConversionThe SUN-80K-SG02HP3-EU-EM6 achieves an efficiency of up to 97.6% as well as an MPPT efficiency of over 99%. This ensures maximum utilisation of solar energy. The support for high-voltage batteries further increases overall efficiency and reduces line losses.Flexibility Through Parallel ConnectionFor particularly large projects, up to 10 units can be connected in parallel. This enables the implementation of large-scale PV systems in the commercial and industrial sector with highest reliability and scalability.Intelligent Battery UsageThe inverter offers six freely programmable time windows for charging and discharging operations. Besides PV systems, diesel generators can also be integrated for battery charging—a decisive advantage for stand-alone grids or critical infrastructure.Comprehensive Safety and Protection FunctionsThe Deye SUN-80K-SG02HP3-EU-EM6 meets international grid and safety standards (incl. IEC 62116, EN 50549, VDE-AR-N 4105). Integrated protective mechanisms such as overvoltage, short-circuit, earth fault and anti-islanding protection ensure reliable operation around the clock.Who is the Deye SUN-80K-SG02HP3-EU-EM6 Suitable For?This model is ideal for:Large commercial and industrial facilities with high energy demandOperators of large-scale PV systems with self-consumption optimisationCritical infrastructures that require reliable emergency power supplySystem integrators with megawatt-scale projectsProperties  ModelDeye SUN-80K-SG02HP3-EU-EM6 Battery input data Battery typeLithium-ion (High voltage) Battery voltage range (V)160~1000 Max. charge current (A)80+80 Max. discharge current (A)80+80 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)128000 Rated PV input voltage (V)650 Start voltage (V)180 MPP voltage range (V)150-850 PV input current (A)36+36+36+36+36+36 Max. PV short-circuit current (A)54+54+54+54+54+54 Number of MPPT6 Strings per MPPT2+2+2+2+2+2 AC output data AC rated power and UPS output (W)80000 Max. AC output power (W)88000 Max. continuous AC throughput (A)200 Output frequency and voltage50/60Hz; 3L/N/PE 220/380Vac, 230/400Vac Grid typeThree-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)80 Size (mm)606W x 927H x 314D Degree of protectionIP65 Warranty10 years  FAQs about the Deye SUN-80K-SG02HP3-EU-EM6 Hybrid InverterWhich batteries is the 80 kW inverter compatible with?The Deye SUN-80K-SG02HP3-EU-EM6 inverter supports high-voltage batteries in the voltage range from 160 to 1000 V and automatically communicates with the BMS.Can several units be operated in parallel?Yes, up to 10 units can be connected in parallel, both grid-connected and off-grid.What protection functions are integrated in the 3-phase inverter?The system has comprehensive protective mechanisms such as overvoltage, short-circuit, ground fault and anti-islanding protection as well as optional arc fault detection (AFCI).Is the inverter suitable for retrofitting?Yes, thanks to AC coupling, it can easily be integrated into existing solar systems.What warranty applies to the device?The manufacturer's warranty is 5 to 10 years, depending on installation location. Scope of Delivery: Deye SUN-80K-SG02HP3-EU-EM6 (80 kW HV Hybrid Inverter) 1 x Deye SUN-80K-SG02HP3-EU-EM6 inverterA high-performance hybrid inverter for industrial applications with 80 kW AC output and support for large-scale high-voltage battery systems.1 x Wall Mount BracketA reinforced metal mounting rail specially designed for the high inherent weight of this industrial device.1 x Wi-Fi / LAN stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x Current Transformer (CT)External clamp-on current transformers for precise measurement of energy flows at the domestic or commercial connection, necessary for energy management.1 x set of PV connectors (MC4-compatible)The full set of DC connector pairs (plus and minus) for connecting the numerous PV strings to the MPPT inputs.1 x set of battery connection accessories (High voltage)Special high-voltage terminals or connectors for safe electrical connection of a compatible HV storage system.1 x Communication Cable (BMS)A prefabricated data cable for communication between the inverter and the battery management system.1 x Mounting Kit (screws and anchors)A set of stainless steel screws and heavy-duty anchors for proper installation of the robust wall bracket.1 x User Manual (user manual)A comprehensive manual with technical specifications, circuit diagrams, installation instructions and safety information.

The Deye SUN-16K-SG05LP3-EU-SM2 is the ideal solution for modern photovoltaic systems with medium to high energy needs. With 16 kW output, support for various battery types and the possibility of connecting multiple devices in parallel, this hybrid inverter offers maximum flexibility, efficiency and reliability, both for new installations and for retrofitting existing PV systems. Highlights at a glanceHigh output power: 16 kW rated power for demanding applications Flexible battery choice: Compatible with lead-acid and lithium-ion batteries High charge/discharge current: Up to 300A for fast energy transfer Scalable: Parallel connection of up to 10 devices possible Robust & weatherproof: IP65 protection class for outdoor useEfficient energy conversion for modern requirementsThe Deye SUN-16K-SG05LP3-EU-SM2 has been developed for the requirements of today’s energy supply systems. Its three-phase output, compatibility with 48V low-voltage batteries and a high MPPT efficiency of over 99 % enable efficient utilisation of solar energy. Even in the case of partial shading or fluctuating irradiation, the system delivers reliable performance.Flexibility and scalabilityWith the option of operating up to 10 devices in parallel, the inverter can be optimally adapted for larger systems. The two battery inputs offer additional flexibility when choosing and combining storage systems. Existing PV systems can also be easily retrofitted thanks to AC coupling.Reliability and protectionThe inverter features extensive protection functions such as DC reverse polarity protection, AC short-circuit protection, residual current monitoring (RCD) and earth fault current monitoring. The IP65 protection class allows operation even in harsh environments. Thanks to the intelligent cooling design, noise levels remain pleasantly low at under 60 dB.Who is the Deye SUN-16K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:Commercial PV systems with medium energy demand Residential households, seeking to optimise self-consumption Hybrid systems with diesel generator for off-grid power supply Installers, who require a modular and scalable solutionOperators of existing systems, wishing for easy upgrades ModelSUN-16K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. charging current (A)300A Max. discharging current (A)300A Charging strategy for Li-Ion batterySelf-adaptation to BMS Number of battery inputs2 PV string input data Max. DC input power (W)24000W Max.DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. operating PV input current (A)36+20A Max. input short-circuit current (A)54+30A Number of MPP trackers/Number of strings MPP tracker2/2+2 AC input/output side Rated AC input/output active power16000 Max. AC input/output apparent power16000 AC input/output rated current (A)24.3/23.2 Max. AC input/output current (A)24.3/23.2 Max. continuous AC passthrough (grid to charge)70 Peak output (without grid)2x rated output, 10s Power factor range0.8 leading to 0.8 lagging Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output grid frequency/range(Hz)50/45-55, 60/55-65 Type of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% (rated power) DC current feed-in<0,5% In Efficiency Max. efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation monitoring, DC component monitoring, earth fault current monitoring, grid monitoring, islanding protection, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Surge protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Degree of protectionIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)50.6 Cooling modeIntelligent cooling Warranty5-year/10-year warranty period depends on the installation conditions of the inverter. Please refer to the general warranty terms for details Grid regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 FAQs about the 16 kW Deye SUN three-phase hybrid inverterDoes my grid operator accept the 16 kW Deye without additional devices?Yes. The Deye SUN-16K complies with all relevant grid codes such as VDE-AR-N 4105, EN 50549, G99 and CEI 0-21. An official test certificate confirms compliance with the VDE standard, so no external NA protection is required. Commissioning is carried out as usual via your grid operator.Which 48 V LiFePO₄ batteries are plug & play and are the charge/discharge currents sufficient?The inverter supports numerous 48 V low-voltage batteries via RS485 or CAN. The manual lists specific profiles and dip-switch combinations for this purpose. Continuous currents of up to 350 A also make it possible to use large LiFePO₄ batteries, ideal for hybrid self-consumption systems.Is the 16 kW inverter suitable for 13–18 kWp PV capacity and does it offer expansion capacity?Absolutely. The inverter allows up to 30 kW DC input capacity, so an oversizing of around 190 % is possible. For PV arrays between 13 and 18 kWp, this results in an ideal DC/AC ratio of 0.8 to 1.1. Subsequent module expansion is also easily possible.How loud is the 16 kW inverter?The noise level is ≤ 60 dB(A); intelligent ventilation means operation is usually hardly audible.Does the inverter support three-phase emergency power, import limiting and remote maintenance?Yes. The Deye SM2 series supports three-phase emergency power operation, remote firmware updates and smart monitoring. An import limit of ~20 W is set ex works, which can be adjusted via Modbus for true zero feed-in.Scope of delivery:1x hybrid inverter1x wall bracket 4x stainless steel anti-collision screw M8x801x parallel communication cable1x L-type hex key1x battery temperature cable1x magnetic ring for battery cable1x magnetic ring for BMS communication cable1x user manual1x Wi-Fi plug3x sensor clamp 

The Deye SUN-18K-SG05LP3-EU-SM2 combines high performance with maximum flexibility and safety for demanding photovoltaic systems. With a rated output of 18 kW, extensive protection functions and a wide range of possible applications from commercial operations to private homes and off-grid energy systems, this hybrid inverter is a reliable solution for modern energy projects.Highlights at a glancePowerful: 18 kW rated power for large PV systems Versatile storage compatibility: Supports lead-acid and lithium-ion batteries Retrofittable: Alternating current pair for existing PV systems Resistant: IP65 protection for outdoor use Diesel generator compatibility: Ideal for off-grid systemsEfficient energy conversion for modern requirementsWith a maximum efficiency of 97.6 % and an MPPT efficiency of over 99 %, the Deye SUN-18K-SG05LP3-EU-SM2 offers a particularly efficient solution for utilising and storing solar energy. The support of two independent MPP trackers and a wide voltage range ensure optimum performance even under changing conditions.Flexibility and scalabilityThe inverter allows up to 10 units to be connected in parallel, making it particularly attractive for larger systems or future expansions. With two battery inputs, the system can be flexibly customised to individual storage requirements - both with lead-acid and modern lithium-ion batteries.Reliability and protectionThanks to comprehensive protective functions such as reverse polarity protection, overvoltage and short-circuit protection as well as residual current monitoring (RCD), the inverter offers maximum safety. The IP65 certification allows it to be used in demanding environments, while the intelligent cooling system ensures quiet and efficient heat dissipation.Who is the Deye SUN-18K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:Commercial operations with high power requirements and self-consumption optimisation Homeowners looking for a future-proof storage solution Installers who want to realise modular systems with scaling potential Operators of off-grid systems, e.g. in conjunction with diesel generators Retrofit projects in which existing systems are to be expanded  modelSUN-18K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)330A Max. Discharge current (A)330A Charging strategy for Li-Ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)27000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+20A Max. Input short-circuit current (A)54+30A Number of MPP trackers/Number of strings MPP tracker2/2+2 AC input/output side Rated AC input/output active power18000 Max. AC input/output apparent power18000 AC input/output rated current (A)27.3/26.1 Max. AC input/output current (A)27.3/26.1 Max. Continuous AC passthrough (grid to charge)70 Peak power (without grid)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 lagging Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output grid frequency/range(Hz)50/45-55, 60/55-65 Form of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, grid monitoring, islanding protection, earth fault detection, overvoltage load shedding protection, residual current device (RCD) monitoring, overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimension (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)50.6 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. For details, please refer to the general warranty conditions Grid controlIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the 18 kW Deye Sun three-phase hybrid inverterIs the SUN-18K really grid-compliant without additional NA protection?Yes, the model fulfils the requirements of VDE-AR-N 4105, EN 50549 and G99, as stated in the official data sheet. A separate VDE certificate confirms compliance with the German grid guidelines. This means that no external NA protection is required and the inverter is generally accepted by grid operators without additional hardware.Which batteries are compatible with the device?The SUN-18K is compatible with numerous 48 V LiFePO₄ storage systems (including BYD, Pylontech, Dyness, Seplos). An official list provides suitable RS485 and CAN profiles including dip switch settings.How much kWp PV can I connect and is there room for later expansion?The device allows up to 30 kW DC input power, which corresponds to approx. 170 % oversizing. For a typical 15 kWp system, this results in a DC/AC ratio of 0.83, optimally within the recommended range of 0.8 to 1.1. This means that the inverter is not oversized and offers enough reserve for future PV expansions without the need for replacement.Does the inverter fit in my technical room - weight, dimensions & volume?With 456 × 750 × 268 mm and a weight of 51.9 kg, it should be installed in pairs or with a wall frame. Thanks to intelligent air cooling, the noise level remains below 60 dB(A). The integrated IP65 protection also allows weatherproof outdoor installation.Does the SUN-18K offer the convenience and backup features I need?Yes, and comprehensively: Genuine three-phase emergency power operation (backup) with Gen-Port for connecting additional devices or inverters. Remote service via Deye-Cloud: Remote maintenance, firmware updates and immediate shutdown possible. Import limit at ~20 W grid consumption - if you want zero feed-in, you can configure this individually via Modbus registers.Scope of delivery:1x hybrid inverter1x wall bracket 4x stainless steel collision protection screw M8x801x parallel communication cable1x L-type hexagon spanner1x battery temperature cable1x magnetic ring for battery cable1x magnetic ring for BMS communication cable1x user manual1x Wi-Fi plug3x sensor terminal

The Deye SUN-16K-SG01LP1-EU is a robust hybrid inverter, ideally suited for use in private households and small businesses. It impresses with an AC output of 15 kW and ensures efficient and reliable energy supply, thanks to flexible battery utilisation as well as comprehensive safety features. The unit is suitable for both grid-connected and off-grid operation.Highlights at a glanceHigh performance: 15 kW nominal power, 16 kW peak powerFlexible operation: On-grid and off-grid use possiblePowerful battery integration: Max. charge/discharge current 250 A, compatible with 48 V low-voltage batteriesEfficient energy conversion: Max. efficiency 97.6%, 2 MPPTs for optimal PV utilisationUser-friendly: Colour touchscreen, integrated WLAN, control via appScalable: Parallel operation of up to 16 devices for larger projectsEfficient energy managementThe SUN-16K-SG01LP1-EU optimises PV energy self-consumption by prioritising direct use of electricity and storing surplus energy in batteries or feeding it into the grid. The battery can also be charged via a diesel generator, making it the ideal backup solution or suitable for remote off-grid sites.Flexible storage and system integrationThe system is suitable for a range of battery manufacturers thanks to its compatibility with 48 V low-voltage batteries and communication interfaces (RS485, CAN). Six programmable time windows for charging and discharging allow for intelligent management, even in conjunction with variable electricity tariffs.Maximum safety and reliabilityThe inverter guarantees safe and reliable operation under all conditions via IP65 protection rating, integrated safety mechanisms (overvoltage, short-circuit and anti-islanding protection) as well as compliance with international standards.Who is the Deye SUN-16K-SG01LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high energy demands and self-sufficiency requirementsSmall businesses with a need for continuous energy supplyOperators of off-grid systems with diesel generator integrationInstallations that should remain scalable through parallel operationProperties  ModelDeye SUN-16K-SG01LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)290 Max. discharge current (A)290 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)25600 Rated PV input voltage (V)500 Start voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)16000 Max. AC output power (W)17600 AC output nominal current (A)69.6 Max. AC current (A)76.5 Max. continuous AC throughput (A)100 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.5 Size (mm)527W x 700H x 294D Degree of protectionIP65 Warranty10 years  FAQs about the Deye SUN-16K-SG01LP1-EU Hybrid InverterWhich batteries is the 16 kW inverter compatible with?The inverter supports 48 V low-voltage batteries and is compatible with various manufacturers thanks to RS485 and CAN interfaces.Can the Deye inverter also be operated without a battery?Yes, the SUN-16K-SG01LP1-EU works both with and without battery storage.Is parallel operation possible?Up to 16 units can be operated in parallel, which allows for use in larger projects.How is the inverter system controlled?The control is conveniently done via a colour touchscreen directly on the device or via app using the integrated WLAN.What warranty does Deye offer?A manufacturer’s warranty of 10 years applies to the SUN-16K-SG01LP1-EU. Scope of delivery: Deye SUN-16K-SG01LP1-EU (16 kW 1-phase hybrid inverter) 1 x Deye SUN-16K-SG01LP1-EU inverterAn extremely powerful single-phase hybrid inverter with 16 kW output, integrated LCD colour touchscreen and support for 48 V low-voltage battery systems.1 x Wall Mount BracketA robust metal rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external clamp-on current transformer for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x installation kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x User Manual (operating instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.

The Deye SUN-12K-SG02LP1-EU is a powerful hybrid inverter for modern photovoltaic systems. With up to 12 kW AC output, flexible battery connection and extensive protection functions, it provides a reliable solution for grid-tied and off-grid applications in both residential and commercial environments.Highlights at a glanceHigh performance: 12 kW AC output power for demanding energy systemsFlexible operation: Up to 16 devices can be used in parallel – on-grid and off-gridVersatile storage integration: Supports lithium-ion and lead-acid batteriesIntelligent energy management: 6 freely configurable time slots for charging and dischargingMaximum safety: Integrated protection against overload, short circuit, overvoltage and island operationEfficient energy utilisation with hybrid technologyThe SUN-12K-SG02LP1-EU enables both DC and AC coupling and is therefore ideal for new installations and retrofits. Thanks to a maximum efficiency of 97.6% and an MPPT efficiency of 99.9%, it ensures optimum energy conversion.Flexibility through parallel operationUp to 16 inverters can be operated in parallel, both in grid-tied and in island mode. This enables projects of any size, from private homes with high energy requirements to larger commercial installations.Intelligent battery usageWith a maximum charge and discharge current of 190 A and adaptive communication to the BMS (RS485, CAN), the inverter supports both lithium-ion and lead-acid batteries. The battery can also be charged from a diesel generator, increasing the possible uses.Safety and protection functionsThe Deye SUN-12K-SG02LP1-EU is certified according to international standards and offers extensive protection mechanisms: Overvoltage and short-circuit protection, anti-islanding, residual current monitoring as well as PV string monitoring. This means it meets the highest safety standards for stable operation.Who is the Deye SUN-12K-SG02LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high levels of self-consumptionCommercial businesses with a need for uninterruptible power supplyInstallations that require flexible expansion via parallel operationOperators of PV systems who wish to use both grid operation and stand-alone operationProperties  ModelDeye SUN-12K-SG02LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)250 Max. discharge current (A)250 Charging strategy for Li-ion batterySelf-adapting to BMS PV string input data Max. DC input power (W)24000 Nominal PV input voltage (V)500 Starting voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)12000 Max. AC output power (W)13200 AC output rated current (A)52.2 Maximum AC current (A)57.4 Max. Continuous AC pass-through (A)80 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.6 Size (mm)420W x 670H x 233D Protection classIP65 Warranty10 years  FAQs about the Deye SUN-12K-SG02LP1-EU hybrid inverterWhich battery types can be connected to the 12 kW inverter?The inverter is compatible with lithium-ion and lead-acid batteries and automatically adjusts its charging strategy to the appropriate BMS.Can the 1-phase inverter be operated in parallel?Yes, up to 16 devices can be connected in parallel for both grid-tied and off-grid systems.Which protection functions are integrated?The unit has overvoltage, short-circuit, island grid and overcurrent protection as well as integrated monitoring for PV strings and residual currents.Is the inverter also suitable for retrofits?Yes, thanks to AC and DC coupling, the SUN-12K-SG02LP1-EU is suitable for both new installations and for expanding existing PV systems.What warranty applies to the device?Deye offers a 10-year manufacturer's warranty. Scope of delivery: Deye SUN-12K-SG02LP1-EU 12 kW hybrid inverter 1-phase 1 x Deye SUN-12K-SG02LP1-EU inverterA single-phase hybrid inverter with 12 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall mount bracketA robust metal mounting rail for securely mounting the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT)An external clamp-on current transformer for measuring the energy flows at the house connection, required for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x operating manual (User Manual)A printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for private and commercial energy projects. It combines inverter, battery charger and energy management system in one device and enables efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for a wide range of storage optionsBattery voltage range from 40 to 60 volts for flexible application optionsMaximum charging and discharging current of 240 amps For rapid energy consumption and outputMaximum PV input power of 18,000 watts Enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 per cent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 per cent and impresses with an MPPT efficiency of over 99 per cent. The wide MPPT voltage range of 200 to 650 volts in conjunction with a maximum PV input voltage of 800 volts ensures efficient energy capture even with changing irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the option of operating up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows uncomplicated integration into existing systems, making the inverter ideal for retrofitting. Support for different battery types enables customised storage solutions, tailored to individual needs and budgets.Reliability and protectionWith a protection class of IP65, the inverter is optimally protected against dust and water and is suitable for demanding environmental conditions. The wide operating temperature range of minus 40 to plus 60 degrees Celsius ensures safe operation even in extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection as well as monitoring of the DC insulation impedance ensure maximum operational safety and a long service life for the system.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption rate and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. Charging current (A)240 Max. Discharge current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)24000 Rated PV input voltage (V)550 Starting voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 Rated AC output current (A)18.2/17.4 Maximum rated AC output current (A)20/19.2 Max. Continuous AC throughput (A)45 Peak power (without mains)2x rated power, 10 S Output power factor0.8 leading to 0.8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current supply<0.5% ln Efficiency Max. Efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputOvervoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage load drop protection,Earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,Islanding protection monitoring, earth fault detection, DC input switch, DC isolation switchImpedance monitoring, reverse current detection (RCD), overvoltage protection level Overvoltage categoryDC Type II/AC Type III Certifications and standards Mains approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 T Degree of protectionIP65 Installation styleWall bracket Guarantee10 years  FAQs about the 10 kW Deye hybrid inverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amps, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterruptible power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, WLAN, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 per cent, whereby each phase can supply up to 50 per cent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 Three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-8K-SG05LP3-EU-SM2 is a powerful three-phase hybrid inverter. It has been specifically designed for residential and commercial applications, combining an inverter, battery charger and intelligent energy management system in a single device. This all-in-one solution is ideal for new installations as well as retrofitting existing photovoltaic systems and reliably maximises self-consumption and energy efficiency.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for flexible storage solutionsBattery voltage range from 40 to 60 volts for different storage requirementsMaximum charging and discharging current of 190 amps enables fast energy transferMaximum PV input power of 12,000 watts for larger photovoltaic systemsUnbalanced output power with up to 50 percent of the rated power per phase enables flexible load distributionParallel connection of up to 10 devices for customisable system sizesEfficient energy conversion for modern requirementsThe Deye SUN-8K-SG05LP3-EU-SM2 offers a maximum efficiency of 97.6 percent and an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts ensures that a high energy yield is achieved even with changing irradiation conditions. With a maximum PV input voltage of 800 volts, the inverter is optimally suited for high-performance solar module fields. This helps to sustainably increase the efficiency and profitability of the photovoltaic system.Flexibility and scalabilityThe Deye SUN-8K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. With the option of operating up to ten devices in parallel, the system can be scaled for both smaller and larger energy projects. AC coupling enables simple integration into existing solar systems without the need for extensive modifications. Thanks to the support of both battery types, lead-acid and lithium-ion, the inverter offers a high degree of adaptability to individual storage solutions.Reliability and protectionWith a protection class of IP65, the inverter is optimally protected against dust and water and is therefore suitable for use in a wide variety of environments. The operating temperature range of minus 40 to plus 60 degrees Celsius ensures reliable operation even in extreme weather conditions. Extensive protection functions such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and monitoring of the DC insulation impedance ensure a high level of operational safety and a long service life for the device.Who is the Deye SUN-8K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners seeking a powerful and flexible solution for self-consumption and grid independenceCommercial operations that require stable and efficient power supplyUsers wishing to retrofit existing solar systems with modern storage solutionsInstallations in regions with fluctuating grid supply, where diesel generators provide additional security of supply  ModelDEYE SUN 8K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)190 Max. discharging current (A)190 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)16000 Rated PV input voltage (V)550 Starting voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)20+20 Max. PV short-circuit current (A)30+30 Number of MPPT2 Strings per MPPT1+1 AC output data AC rated power and UPS power (W)8000 Max. AC output power (W)8800 AC output rated current (A)12.2/11.6 Maximum AC output rated current (A)13.4/12.8 Max. continuous AC throughput (A)45 Peak power (without grid)2-fold rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputOvervoltage Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Current Interrupter (optional), Grid Monitoring,Islanding Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Reverse Current Detection (RCD), Overvoltage Protection Level Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45°C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35.2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs about the 8 kW Deye Sun Hybrid InverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 190 amps, which enables fast energy transfer.Which protective functions are integrated in the Deye?The inverter offers protective mechanisms such as DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, optional arc fault protection switch, islanding protection, DC switch, insulation impedance detection, residual current detection, and overvoltage protection class II for DC and AC.Is the inverter suitable for retrofitting existing systems?Yes, the inverter can be easily integrated into existing solar systems thanks to AC coupling.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase supplying up to 50 percent of the rated power. Scope of delivery: Deye SUN-8K-SG05LP3-EU-SM2 (8 kW LV hybrid inverter) 1 x Deye SUN-8K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 8 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x wall mounting (Wall Mount Bracket)A robust metal mounting rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clip-on current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4 compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for proper installation of the wall mount.1 x user manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety information.

The Deye SUN-10K-SG05LP3-EU-SM2 is a powerful three-phase hybrid inverter designed for both residential and commercial solar power systems. It integrates solar power, battery storage and grid power within an intelligent energy management system to ensure maximum efficiency and flexibility. This inverter is a future-proof and robust solution for sustainable energy supply and is ideal for both new installations and retrofitting existing systems.Highlights at a glanceSupports lead-acid and lithium-ion batteries for flexible storage solutionsMaximum charging and discharging current of 210 amps for fast energy transferMaximum PV input power of 15,000 watts for high-performance solar systemsTwo independent MPPT inputs for optimal utilisation of solar energy with different module alignmentsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionParallel connection of up to 10 devices for individually scalable systemsEfficient energy conversion for modern requirementsThe Deye SUN-10K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and an MPPT efficiency rate of over 99 percent. With an MPPT voltage range from 200 to 650 volts and a maximum PV input voltage of 800 volts, the inverter works reliably and efficiently even under different irradiation conditions. This ensures optimal use of solar energy and economical operation of the entire system.Flexibility and scalabilityThe Deye SUN-10K-SG05LP3-EU-SM2 offers maximum flexibility by allowing up to ten units to be operated in parallel. This makes it easy to adapt to different power requirements. AC coupling enables straightforward integration into existing systems without major intervention in the existing infrastructure. Thanks to support for both lead-acid and lithium-ion batteries, customised storage solutions can be implemented to suit individual needs.Reliability and protectionThe inverter features IP65 protection against dust and water, making it suitable for use in challenging environmental conditions. A wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme circumstances. Comprehensive protection features such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and DC insulation impedance monitoring ensure the safety of the inverter, battery, and connected devices.Who is the Deye SUN-10K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption and reduce energy costsCommercial operators who require a stable and efficient energy supplyOperators of existing solar power systems who want to expand their system with a modern storage solutionInstallations in regions with fluctuating grid stability, where diesel generators provide an additional energy source  ModelDEYE SUN 10K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)210 Max. discharging current (A)210 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adapting to BMS PV string input data Max. DC input power (W)20000 Rated PV input voltage (V)550 Starting voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)10000 Max. AC output power (W)11000 AC rated output current (A)15.2/14.5 Maximum AC rated output current (A)16.7/16 Max. continuous AC through current (A)45 Peak output (without grid)2x rated power, 10 s Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% European efficiency97.00% MPPT efficiency99,90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputOvervoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage event load protection,Earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,Island detection monitoring, earth fault detection, DC input switch, DC isolation impedanceMonitoring, residual current detection (RCD), overvoltage protection level Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General Data Operating temperature range (℃)-45~60°C, >45° C output derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Mounting styleWall mounting Warranty10 years  FAQs about the 10 kW Deye three-phase hybrid inverterIs the inverter suitable for outdoor use?Yes, with protection class IP65, the SUN-10K-SG05LP3-EU-SM2 is protected against dust and splashing water and is therefore suitable for outdoor useHow is the system monitored and controlled?Parameters can be set and firmware updates can be performed remotely via the intelligent monitoring platform.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-10K-SG05LP3-EU-SM2 supports the integration of diesel generators for enhanced power security.Is the inverter suitable for retrofitting existing systems?Yes, thanks to AC coupling the inverter can be easily integrated into existing solar systems.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-10K-SG05LP3-EU-SM2 Three-phase Hybrid Inverter 10KW 1 x Deye SUN-10K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 10 kW output, integrated LCD touchscreen and support for 48V low-voltage batteries.1 x Wall Mount BracketA robust metal mounting rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi Stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External split-core current transformers for measuring energy flows at the domestic connection, necessary for zero feed-in and optimising self-consumption.1 x Set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication cable (BMS)A prefabricated RJ45 data cable for the connection between the inverter and battery management system.1 x Mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional mounting of the wall bracket.1 x User manual (User Manual)A printed manual with detailed installation instructions, circuit diagrams, and safety information.

The Deye SUN-15K-SG05LP3-EU-SM2 is a powerful three-phase hybrid inverter designed for demanding commercial and residential photovoltaic systems. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile application options, it is a reliable solution for modern energy systems.Highlights at a glanceHigh output: 15 kW nominal output for medium to large PV systemsFlexible battery insert: Compatible with 48 V lithium-ion and lead-acid batteriesHigh charging and discharging current: up to 280A for fast energy storageParallel connection: operation of up to 10 devices possible, on-grid and off-gridDiesel generator compatible: support for external energy sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate through intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 percent and MPPT efficiency of over 99 percent, the system is extremely efficient and energy-optimised.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, the SUN-15K is versatile thanks to AC coupling and parallel operation. The combination with up to 10 inverters and various battery types enables scalable storage solutions and maximum system availability.Intelligent grid and off-grid system operationThe inverter supports operation on the public power grid as well as stand-alone operation. The integrated communication via RS485, CAN, WLAN, GPRS or LAN (optional) allows easy integration into monitoring and control systems. The protective functions and IP65 protection class guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems in the commercial or private sector with medium energy requirementsSystems that are operated parallel to the mains or off-gridProjects with requirements for maximum flexibility and reliabilityExisting systems that are to be modernised via AC coupling  ModelSUN-15K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)280A Max. Discharge current (A)280A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)24000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power15000 Max. AC input/output apparent power16500 AC input/output rated current (A)22.8/21.8 Max. AC input/output current (A)25/24 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)50.6 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low-voltage batteries with a voltage of 40-60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6 %, the EU efficiency is 97.0 %, which means very low losses.How many MPPTs and strings does it support?It has two MPP trackers, to each of which up to two PV strings can be connected (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 devices are possible in parallel in on-grid or off-grid operation to flexibly scale system performance and capacity.Which protective functions are integrated?It is protected to IP65 and is therefore protected against dust and water jets. It also has comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuits, earth faults and arcing ("AFCI"). Scope of delivery: Deye SUN-15K-SG05LP3-EU-SM2 Three-phase hybrid inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with 15 kW output, integrated LCD colour touchscreen and support for 48V batteries.1 x Wall Mount BracketA robust metal rail for securely fastening the appliance to a wall with the appropriate load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local WLAN network for monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)Folding current transformers for recording the energy flows at the house connection, which are necessary for functions such as zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The corresponding plug pairs (plus and minus) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for the data connection between the inverter and the battery management system of the storage system.1 x mounting kitContains the required stainless steel screws and heavy-duty plugs for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with technical specifications, wiring diagrams, installation instructions and safety instructions.

The Deye SUN-20K-SG05LP3-EU-SM2 offers a reliable and efficient solution for energy conversion in photovoltaic systems. With its high charging and discharging capacity and support for various battery types, it is ideal for demanding energy projects.Highlights at a glanceHigh performance: 20 kW rated output for high energy requirements Flexible battery selectionCompatible with lead-acid and lithium-ion batteries High charging/discharging current: Up to 350A for fast power transmission Expandable: Parallel connection of up to 10 devices possible Robust designIP65 protection class for use in various environments Efficient energy conversion for modern requirementsThe Deye SUN-20K-SG05LP3-EU-SM2 is specially designed to meet the requirements of modern photovoltaic systems. With its three-phase output power and support for 48V low-voltage batteries, it offers an efficient solution for energy conversion and storage.Flexibility and scalabilityThanks to the option of connecting up to 10 devices in parallel, the inverter can be flexibly adapted to different system sizes. The support of both lead-acid and lithium-ion batteries enables customised adaptation to specific energy requirements.Reliability and protectionWith a protection class of IP65, the inverter is protected against dust and water, ensuring reliable operation in different environments. The integrated protective functions ensure safe and stable operation of the system.Who is the Deye SUN-20K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for: Operators of larger solar systems who are looking for a flexible and safe storage solution Commercial enterprises that want to cover energy peaks or work off-grid Homeowners who want to maximise their self-consumption rate Users with diesel generator support who are aiming for maximum self-sufficiency  ModelSUN-20K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)350A Max. Discharge current (A)350A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)32000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power20000 Max. AC input/output apparent power22000 AC input/output rated current (A)30.4/29 Max. AC input/output current (A)33.4/31.9 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)51.9 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye Sun three-phase hybrid inverterWhich battery types are supported?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60V.Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel, making the inverter ideal for larger systems.What is the maximum charging and discharging current?The maximum charging and discharging current is 350A each, which enables fast energy transfer.What is the standby consumption of the device?The Deye SUN-20K-SG05LP3-EU-SM2 has a self-consumption of ≤ 60 W.Does the 20 kW inverter fit on an 18 kWp system or do I have to oversize/undersize?Yes, the Deye SUN 20K-SG05LP3-EU-SM2 is technically optimised for an 18 kWp system. It does not necessarily have to be oversized or undersized. With a DC/AC ratio of around 0.9, it is exactly in the ideal range (0.9 - 1.1 is recommended). This means that the system is even slightly undersized, but this has practically no disadvantages and at the same time offers scope for retrofitting additional modules at a later date. Scope of delivery: Deye SUN-20K-SG05LP3-EU-SM2 (20 kW LV hybrid inverter) 1 x Deye SUN-20K-SG05LP3-EU-SM2 inverterAn extremely powerful three-phase hybrid inverter with 20 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA solid metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-5K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial applications. It intelligently combines solar energy, battery storage and grid power for efficient energy conversion and stable energy management. Ideal for new installations and retrofits, it promotes high self-consumption and system efficiency.Highlights at a glanceHigh charging and discharging current up to 120 amps for fast energy transferCompatibility with diesel generators for additional protection in case of grid interruptionsParallel connection of up to 10 devices enables flexible system expansionEasy integration into existing solar systems via AC couplingTime-based battery management with up to six configurable charging and discharging periods to optimise energy useSafe operation through 48 volt low voltage battery and transformer isolation designUnbalanced output power with up to 50 per cent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-5K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 per cent and an MPPT efficiency of over 99 per cent. The wide MPPT voltage range of 200 to 650 volts ensures stable performance even in variable weather and irradiation conditions. This technology ensures optimum energy yield and helps to increase the profitability of the photovoltaic system.Flexibility and scalabilityUp to ten devices can be operated in parallel, making the inverter suitable for both smaller and larger energy systems. The AC coupling enables simple integration into existing systems and reduces the need for extensive modifications. The inverter is compatible with lead-acid and lithium-ion batteries, allowing different storage solutions to be implemented flexibly. With time-based battery management, charging and discharging processes can be adapted to electricity tariffs and consumption profiles, enabling additional cost savings.Reliability and protectionThe inverter has protection class IP65 and is therefore protected against dust and water. It is designed for an operating temperature range from minus 40 to plus 60 degrees Celsius and is therefore also suitable for demanding environmental conditions. Comprehensive protective functions such as reverse polarity protection, overcurrent protection, overvoltage protection and thermal protection, monitoring of the DC insulation impedance and residual current monitoring ensure safe operation and a long service life for the system.Who is the Deye SUN-5K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for Homeowners who want to achieve a higher self-consumption rate and reduce energy costsCommercial operations needing reliable and flexible energy supplyUsers wishing to retrofit existing solar systems with modern storage solutionsInstallations in regions with variable grid stability where diesel generators are an additional energy source  ModelDEYE SUN 5K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)120 Max. discharging current (A)120 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)8000 Nominal PV input voltage (V)550 Starting voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)20+20 Max. PV short circuit current (A)30+30 Number of MPPT2 Strings per MPPT1+1 AC output data AC nominal power and UPS power (W)5000 Max. AC output power (W)5500 AC output nominal current (A)7.6/7.3 Maximum AC output nominal current (A)8.4/8 Max. continuous AC throughput (A)45 Peak power (without grid)2x nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputOvervoltage protection, AC output short circuit protection, DC component monitoring, overvoltage load case protection,Earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,Islanding protection monitoring, earth-fault detection, DC input switch, DC isolationImpedance monitoring, residual current detection (RCD), overvoltage protection level Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Guideline R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35.2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs about the Deye Sun three-phase hybrid inverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60 volts.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-5K-SG05LP3-EU-SM2 supports the integration of diesel generators for additional supply security.How many MPP trackers does the Deye SUN-5K-SG05LP3-EU-SM2 inverter have?The unit has 2 independent MPP trackers, which allow flexible PV system design.What is the maximum charging and discharging current?The maximum charging and discharging current is 120 amps each and enables fast energy transfer.Can the inverter supply unbalanced loads?Yes, the inverter can handle an unbalanced load of up to 100 per cent, with each phase supplying up to 50 per cent of the rated power. Scope of delivery: Deye SUN-5K-SG05LP3-EU-SM2 (5 kW LV hybrid inverter) 1 x Deye SUN-5K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 5 kW output, integrated LCD colour touchscreen, and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet to enable remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT)External split-core current transformers for measuring the energy flows at the house connection, required for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A prefabricated RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and anchors)A set of stainless steel screws and heavy-duty anchors for proper installation of the wall mount bracket.1 x user manualA printed manual providing detailed installation instructions, wiring diagrams and essential safety instructions.

The Deye SUN-15K-SG01HP3-EU-AM2 is a powerful hybrid inverter with high-voltage battery support, developed for demanding photovoltaic systems. With 15 kW output, intelligent load management and a wide range of protection features, this model is ideal for energy self-sufficient applications, commercial operations or retrofit projects for existing solar installations. Highlights at a glancePowerful: 15 kW rated output with high efficiency High-voltage battery compatibility: Higher charging efficiency thanks to battery voltage up to 700 V High safety standard: Comprehensive protection functions incl. reverse polarity protection and residual current monitoring Flexible and expandable: Parallel connection of up to 10 devices possible Quiet and compact: Only 30.5 kg weight, < 55 dB noise level and wall-mountable Efficient energy conversion with high-voltage technologyThe SUN-15K-SG01HP3-EU-AM2 utilises a high-voltage battery voltage of up to 700 V, making charging and discharging processes particularly efficient. With a maximum efficiency of 97.6 % and an impressive MPPT efficiency of 99.9 %, it ranks among the most efficient devices in its class. Two MPP trackers ensure optimum energy yield even with complex module layouts.Flexibility and scalabilityWhether as part of a new energy system or for retrofitting existing PV installations: the inverter can be used flexibly. Thanks to parallel connection of up to 10 units and support of alternating current pairs, the system is suitable for a wide range of installation configurations. The intelligent charging schedule permits six individually definable time windows for battery usage.Reliability and protectionWith IP65 protection rating, extensive safety functions such as anti-islanding protection, short-circuit and overvoltage protection as well as residual current monitoring, the SUN-15K-SG01HP3-EU-AM2 is perfectly equipped for safe operation – even at extreme temperatures between -45 °C and +60 °C. Intelligent cooling ensures quiet, stable operation.Who is the Deye SUN-15K-SG01HP3-EU-AM2 suitable for?This inverter is ideal for: Private households and businesses relying on high-voltage energy storage Installers seeking flexible retrofit solutions with minimal space requirements Off-grid applications requiring diesel generator support Users with complex load profiles in need of efficient charge/discharge management Systems requiring high efficiency with a compact design ModelDEYE SUN 15K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-Ion Battery voltage range (V)160~700 Max. charging current (A)37 Max. discharging current (A)37 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)19500 Rated PV input voltage (V)1000 Start voltage (V)180 MPP voltage range (V)150-850 Full-load DC voltage range (V)420-850 Rated DC input voltage (V)600 PV input current (A)26+20 Max. PV short circuit current (A)39+30 Number of MPPT2 Strings per MPPT2+1 AC output data AC rated power and UPS power (W)15000 Max. AC output power (W)16500 AC output nominal current (A)22,8 / 21,8 Max. AC output nominal current (A)25 / 24 Max. AC output current(A)30 Max. continuous AC throughput (A)80 Peak power (without grid)1.5 x nominal power, 10 s Generator input/intelligent load/AC coupling current (A)22,8 / 80 / 22,8 Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( nominal output ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Dimensions (mm)408B×638H×237T（Without connectors and brackets） Degree of protectionIP65 Mounting styleWall mounting Warranty10 years  FAQs about the Deye Sun 15K Hybrid InverterCan I really limit grid consumption to 0 W?In the “Zero-Export-to-CT” operating mode, the inverter reduces feed-in to nearly zero. However, the current firmware allows a technical residual consumption of approx. 20 W. Users report that adjustments to Modbus registers or external energy management systems such as ioBroker can indeed achieve 0 W grid consumption. For standard applications such as full feed-in or net metering, the factory setting is usually entirely sufficient.Are the charge/discharge currents sufficient for large high-voltage batteries?Yes. According to the data sheet, the inverter allows 50 A charging or discharging current in each direction, which enables up to 20 kW output at a battery voltage of 400 V. Systems such as BYD HVS/HVM, Pylontech Force H and Dyness Tower are listed as fully compatible in the official Approved Battery List. This allows even large storage blocks to be operated quickly and in sync with the BMS.How much kWp can I connect, without the inverter clipping?On the 15 kW model, up to 30 kW PV access power and 24 kW PV input power are permitted. A typical 18 kWp PV installation results in a DC/AC ratio of 1.2, which is within the recommended oversizing range of 0.8 to 1.3. Slight clipping may occur on a few summer days but has little effect on total yield and offers valuable expansion reserves.Can I install the inverter outdoors?Yes. The device is protected against dust and water jets according to IP65, operates reliably at temperatures from –40 °C to +60 °C and tolerates 100 % humidity. For outdoor installation, the manufacturer recommends a protected, well-ventilated location to ensure unrestricted air cooling (≤ 55 dB(A)) and prevent fan blockage.Can the inverter be fully controlled via app or remote access?Yes. All relevant functions can be remotely controlled via Deye Cloud or the local SUN APP: parameter changes, firmware updates and emergency shutdowns are no problem. The app manual guides you step by step through the Wi-Fi setup including connection using the internal hotspot network. RS485, CAN, LAN and 4G sticks are also available for connecting external EMS solutions.  Scope of delivery: Deye Sun 15K-SG01HP3-EU-AM2 Three-phase Hybrid Inverter 15KW 1 x Deye SUN-15K-SG01HP3-EU-AM2 InverterA three-phase high-voltage hybrid inverter with 15 kW output, integrated LCD touchscreen and two MPPT trackers.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.3 x Current Transformer (CT)External clamp current transformers for measuring energy flows at the house connection, required for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4 compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage.1 x communication cable (BMS)A prefabricated RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and plugs)A set of stainless steel screws and heavy-duty plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety notes.

The Deye SUN-20K-SG01HP3-EU-AM2 is a powerful three-phase hybrid inverter with high-voltage battery compatibility. It impresses with high efficiency, flexible application options and maximum scalability – ideal for demanding solar installations in residential and commercial projects.Highlights at a glance20 kW rated output & high-voltage battery compatibility for maximum efficiency Up to 10 devices connectable in parallel, ideal for modular large-scale systems 100 % unbalanced output, each phase individually usable 6 freely adjustable charging/discharging time windows for smart energy management Robust IP65 housing & support for diesel generatorsEfficient energy conversion with high-voltage technologyThe SUN-20K-SG01HP3-EU-AM2 uses high-voltage lithium-ion batteries (160–700 V), enabling particularly high charging and discharging efficiency. With an MPPT efficiency of 99.9 % and a maximum efficiency of 97.6 %, it ensures optimal utilisation of the available solar energy even under variable weather conditions.Flexibility and scalabilityThanks to the possibility of parallel connection of up to 10 devices, the inverter is suitable for both complex new builds and retrofitting larger systems. Two independent MPP trackers each with two inputs optimise energy yields across multiple module arrays. Six freely definable time windows for charging and discharging the battery provide maximum control and adaptability.Reliability and protectionThe inverter is equipped with comprehensive protection mechanisms including reverse polarity protection, anti-islanding operation, insulation and short-circuit monitoring, and overvoltage protection. The IP65 protection class enables safe outdoor use, whilst smart cooling and quiet operation (< 55 dB) ensure low-maintenance running.Who is the Deye SUN-20K-SG01HP3-EU-AM2 suitable for?This inverter is ideal for: Businesses with high energy and storage demands Homeowners seeking maximum independence with high-voltage technology Installers planning flexible, future-proof systems Project developers realising AC-coupled retrofitting solutionsOff-grid systems with diesel generators or hybrid operations  ModelDEYE SUN 20K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-lon Battery voltage range (V)160~700 Max. charging current (A)37 Max. discharging current (A)37 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)32000 Rated PV input voltage (V)1000 Start voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)26+26 Max. PV short circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated output & UPS power (W)20000 Max. AC output power (W)22000 AC rated output current (A)30,4 / 29 Max. AC rated output current (A)33,4 / 31,9 Max. continuous AC throughput (A)80 Peak output (without grid)1.5x rated power, 10 S Generator input/intelligent load/AC coupling current (A)30,4 / 80 / 30,4 Output power factor0.8 leading to 0.8 lagging Output frequency & voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated output ) DC injection<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at PV string input, insulation resistance detection, differential current monitoring unit, output overcurrent protection, output short circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Size (mm)408B×638H×237T（Without connectors and brackets） Protection classIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye Sun 20K High-Voltage Hybrid InverterWhich grid codes are stored in the inverter?The inverter contains all common grid codes, which can be switched directly in the menu “Setting → Grid”. These include VDE-AR-N 4105 for Germany, EN 50549 for the EU, CEI 0-21 for Italy, G98 and G99 for Great Britain, OVE R25 for Austria, RD 1699 and RD 14 for Spain, as well as NRS 097-2-1 for South Africa. As a rule, no additional NA protection is required as soon as the appropriate country profile has been activated.Which high-voltage batteries are compatible and how do I set up the BMS correctly?The approved storage solutions include BYD HVS and HVM, Pylontech Force H1 and H2, Dyness Tower, as well as the Deye GB-L Series. Each storage is assigned a specific setup number, which is selected in the menu “Battery → Lithium → Setup Number”. Alternatively, the same number can be set using the DIP switches on the battery. Other models follow the same procedure and are listed in the compatibility list.How much PV output can be connected without inverter clipping?According to the data sheet, up to 30 kW DC input is permitted, while the AC output is 20 kW. This gives a DC/AC ratio of 1.5. In practice, a ratio of 1.1 to 1.2 is recommended, which equates to around 22 to 24 kWp. Even with 26 to 28 kWp, only minor losses due to clipping occur on a few days according to experience.How loud is the inverter during operation?In standby operation, the inverter remains almost silent as the fans only start at temperatures above 50°C or under sustained load. In normal operation, the noise level is below 45 decibels. Under full load, a clear airflow noise can be heard, but it stays below the maximum sound pressure of 55 decibels, as specified by the manufacturer. The device is therefore well suited for basements and technical rooms.Can settings and firmware updates be carried out via app?Via the Deye Cloud or the SUN-APP, all settings can be managed remotely. This includes changes to charging and export parameters, firmware updates for inverter, BMS, and HMI as well as an emergency shutdown. Connection is established via WiFi, LAN, or the factory hotspot network. RS485, CAN, and 4G sticks are also available for integrating external systems. Scope of delivery: Deye SUN-20K-SG01HP3-EU-AM2 (20 kW HV Hybrid Inverter) 1 x Deye SUN-20K-SG01HP3-EU-AM2 inverterA powerful three-phase high-voltage hybrid inverter with 20 kW output, integrated LCD touchscreen, and two MPPT trackers.1 x Wall Mount BracketA solid metal mounting rail for safe installation of the heavy device on a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for Internet connection for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clamp current transformers to measure the power flows at the house connection, necessary for zero export and self-consumption optimisation.1 x set of PV connectors (MC4 compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and battery management system.1 x mounting kit (screws and plugs)A set of stainless steel screws and heavy-duty wall plugs for correct installation of the wall mount.1 x user manualA printed manual containing detailed installation instructions, diagrams and safety notes.

The Deye SUN-30K-SG01HP3-EU-BM3 is a versatile hybrid inverter with high output power, three MPP trackers and high-voltage battery support. It was specially developed for demanding PV applications in commercial operations, apartment blocks or off-grid systems and impresses with its efficiency, flexibility and robust design.Highlights at a glance:30 kW nominal power and 33 kW peak power For medium to large systems 3 MPPT with 6 PV strings for maximum yield optimisation Two high-voltage battery inputs with 50 A charge/discharge current each Parallel connection of up to 10 devices for modular system solutions Supported Mains-independent operation with diesel generators Efficient energy conversion for demanding applicationsWith a maximum DC input power of 39,000 W, three independent MPPTs and an MPPT efficiency of 99.9 %, the SUN-30K achieves outstanding performance. The intelligent MPPT control ensures high yields even with shading or unevenly aligned module fields.Flexibility and scalabilityWhether grid-connected, hybrid or completely off-grid - the inverter offers flexible application options. The parallel connection of up to 10 devices, AC coupling and two separate battery inputs enable scalable energy storage systems with high-voltage lithium-ion batteries (160-800 V). The energy can be utilised or stored in a targeted manner via six adjustable charging/discharging windows.Reliability and protectionThanks to protection class IP65, intelligent cooling (< 65 dB) and safety functions such as reverse polarity, overvoltage, short-circuit and residual current protection, operation is guaranteed even under demanding conditions. The certifications in accordance with VDE, IEC and other international standards ensure use in the European market.Who is the Deye SUN-30K-SG01HP3-EU-BM3 suitable for?This inverter is ideal for: Commercial PV systems with medium to high energy requirements Apartment blocks with a high proportion of self-consumption PV projects with storage expansion via high-voltage batteries Hybrid solutions with diesel generators for maximum supply reliability Installers looking for a reliable solution for large modular systems  ModelDEYE SUN 30K-SG01 HP3-EU-BM3 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. Charging current (A)50+50 Max. Discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)48000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 Number of MPPT3 Strings per MPPT2 + 2 + 2 AC output data AC rated power and UPS power (W)30000 Max. AC output power (W)33000 Rated AC output current (A)45,5 / 43,5 Max. AC output current (A)50 / 47,8 Max. Continuous AC throughput (A)200 Peak power (without mains)1.5 times the rated power, 10 SS Output power factor0.8 leading to 0.8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current supply<0.5% ln Efficiency Max. Efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, overcurrent protection output, short-circuit protection output, overvoltage protection output Overvoltage categoryDC Type II/AC Type III Certifications and standards Mains approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527W×894H×294T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Guarantee10 years  FAQs about the Deye Sun 30K high-voltage hybrid inverterDo I need external NA protection?No. The 30 kW BM3 series has an integrated anti-islanding protection circuit that meets the requirements of the applicable standards such as VDE-AR-N 4105. Separate NA protection is not required.Which high-voltage storage systems are approved?According to the official compatibility list (version DY-HV 160-800-017), BYD HVS/HVM, Pylontech Force H (H1/H2), Dyness Tower and the Deye GB-L series, among others, are fully compatible. The connection is made via CAN or RS485, depending on the system.How much kWp can I connect without major losses?Technically, up to 65 kW DC input power is permitted; according to the manufacturer, the maximum PV access power is 100 kW. A DC/AC ratio of 1.2 to 1.3 - i.e. around 60 to 65 kWp - is considered practical. Even on midsummer days, experience has shown that the yield loss due to clipping is less than two per cent on an annual average.How many strings and MPPTs are available?The inverter offers four independent MPP trackers (MPPT), each with two DC inputs. This means that a total of eight string connections are available, particularly suitable for complex roof orientations with different module inclinations and directions.Can I connect several 30 kW devices?Yes, up to ten inverters can be connected in parallel in on-grid or off-grid operation. One device assumes the master function, reads the CT sensors and controls the other units in the network. Scope of delivery: Deye SUN-30K-SG01HP3-EU-BM3 (30 kW HV hybrid inverter) 1 x Deye SUN-30K-SG01HP3-EU-BM3 inverterA powerful three-phase high-voltage hybrid inverter with 30 kW output, integrated LCD touchscreen and three MPPT trackers for large commercial or demanding private photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar systems with high energy requirements. With 50 kW rated power, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, ideal for large PV projects, industrial applications and off-grid supply systems.Highlights at a glancePowerful: 50 kW rated power and 55 kW maximum output power Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100 % unbalanced output usable per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large systemsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6 %, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9 % ensures optimum power yield even with partial shading or heterogeneous module fields.Flexibility and scalabilityThis inverter can be used in systems with up to 10 devices connected in parallel, making it particularly suitable for large modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with powerful storage systems. The six programmable charge/discharge time windows offer intelligent energy management for self-consumption and grid relief.Reliability and protectionWith IP65 protection class and comprehensive safety functions such as reverse polarity protection, residual current monitoring and overvoltage protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. The intelligent cooling system ensures quiet operation (< 65 dB) even at high power.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial plants with very high energy consumption Large-scale projects with multiple battery storage systems and module fields Installers who want to realise future-proof high-voltage systems Off-grid installations with diesel generator connection Grid-parallel storage solutions with intelligent load management  ModelDEYE SUN 50K-SG01 HP3-EU-BM4 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. charging current (A)50+50 Max. discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of PV string Max. DC input power (W)80000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 + 55 Number of MPPT4 Strings per MPPT2 + 2 + 2 + 2 AC output data AC rated power and UPS power (W)50000 Max. AC output power (W)55000 AC output rated current (A)75,8 / 72,5 Max. AC output current (A)83,4 / 79,8 Max. continuous AC throughput (A)200 Peak power (without grid)1.5 times rated power, 10 S Generator input/intelligent load/AC coupling current (A)75,8 / 200 / 75,8 Output power factor0,8 leading to 0,8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527B×894H×294T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Warranty10 years  FAQs about the Deye Sun 50K Hybrid inverterDo I need external NA protection from 50 kW?No. The inverter has an integrated anti-islanding circuit and fulfils all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage storage systems are approved?Officially compatible models include BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The appropriate setup number is entered directly in the menu “Battery → Lithium → Setup Number” or set via DIP switches. According to the provider, other storage solutions such as BOS-G are already preconfigured.How many kWp can I connect without clipping?According to the data sheet, the maximum DC input power is 65 000 W. The manufacturer even provides for up to 100 000 W PV access power, which results in a DC/AC ratio of 1.3. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit can low clip losses occur on a few high-load days, which remain below two per cent over the course of the year.Can I connect several 50-kW devices in parallel?Yes. Up to ten inverters can be operated in parallel, both grid-connected and off-grid. One device assumes the master function including CT sensor connection, the other units follow automatically in the network.Do I need special ventilation?Active climate technology is not required. The inverter works with intelligent air cooling and is designed for ambient temperatures up to 60 °C. The maximum noise level is 65 dB(A) under full load, in standby mode the device remains virtually silent. Good air circulation is important, for example in a ventilated technical room or in a protected outdoor location. The fan inlets and outlets must remain unobstructed, otherwise charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 50 kW power, integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial device to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT - Current Transformer)External split core current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation at high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the massive wall bracket.1 x operating manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety instructions.

The Deye SUN-25K-SG01HP3-EU-AM2 is a powerful, three-phase hybrid inverter with high-voltage battery compatibility. It was specially developed for demanding PV applications in residential and commercial areas and impresses with its high efficiency, flexible application options and robust design.Highlights at a glanceHigh rated power: 25 kW for high-performance PV systems in residential and commercial areas.AC and DC coupling: Enables the retrofitting of existing solar systems and the flexible integration of battery storage systems.High efficiency: A maximum efficiency of 97.6 % and an MPPT efficiency of over 99 % ensure maximum energy yield.Scalable: Up to 10 units can be connected in parallel for on-grid and off-grid operation, allowing flexible system expansion.Intelligent monitoring: The smart functions enable remote monitoring and maintenance, including the remote setting of parameters and firmware updates.Comprehensive safety: Equipped with various protection mechanisms, including overvoltage, overcurrent and earth fault protection.Efficient energy conversion with high-voltage technologyWith a maximum DC input power of 32,500 W and an MPPT efficiency of 99.9 %, the SUN-25K achieves outstanding performance. The intelligent MPPT control ensures high yields even with shading or unevenly aligned module fields. The inverter is optimised for high-voltage lithium-ion batteries (160–700 V), which enables particularly high charging and discharging efficiency.Flexibility and scalabilityWhether grid-connected, hybrid or off-grid: the inverter offers flexible application options. The AC and DC coupling makes it easy to retrofit existing solar systems. The parallel connection of up to 10 devices and two separate battery inputs offer scalable solutions for growing energy requirements. With six freely definable time windows for charging and discharging the battery, the energy can be utilised or stored in a targeted manner. Reliability and protectionThanks to the IP65 protection class and intelligent cooling, operation is guaranteed even under demanding conditions. Safety functions such as reverse polarity, overvoltage, short-circuit and residual current protection ensure maximum operational safety. The certifications in accordance with VDE-AR-N 4105, EN 50549 and other international standards confirm the high quality of the device. Who is the Deye SUN-25K-SG01HP3-EU-AM2 suitable for? This inverter is ideal for:Commercial operations with high energy requirements and storage needsHomeowners aiming for maximum self-sufficiency with high-voltage technologyInstallers planning flexible, future-proof systemsProject developers who implement AC-coupled retrofit solutions  ModelDEYE SUN 25K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-lon Battery voltage range (V)160~700 Max. Charging current (A)50 Max. Discharge current (A)50 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)40000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Full load DC voltage range (V)500-850 Rated DC input voltage (V)700 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)25000 Max. AC output power (W)27500 Rated AC output current (A)37,9 /36,3 Maximum rated AC output current (A)41,7 / 39,9 Max. Continuous AC throughput (A)80 Peak power (without mains)1.5 times the rated power, 10 S Generator input / intelligent load / AC coupling current (A)30,4 / 80 / 30,4 Output power factor0,8 leading to 0,8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current supply<0,5% ln Efficiency Max. Efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, overcurrent protection output, short-circuit protection output, overvoltage protection output Overvoltage categoryDC Type II/AC Type III Certifications and standards Mains approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Size (mm)408B×638H×237T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Guarantee10 years  FAQs about the Deye SUN-25K-SG01HP3-EU-AM2Which grid codes are stored in the inverter?The inverter contains all common grid codes, which can be changed directly in the "Setting → Grid" menu. These include VDE-AR-N 4105 for Germany, EN 50549 for the EU and CEI 0-21 for Italy. As a rule, no additional NA protection is required as soon as the appropriate country profile has been activated.Which high-voltage storage systems are compatible and how do I set up the BMS correctly?The approved storage solutions include BYD HVS and HVM, Pylontech Force H1 and H2, Dyness Tower and the Deye GB-L Series. Each storage system is assigned a specific setup number, which is selected in the "Battery → Lithium → Setup Number" menu. Alternatively, the same number can be set using the DIP switches on the battery.How much PV power can I connect without the inverter clipping?According to the data sheet, up to 32,500 W DC input power is permitted, while the AC output power is 25 kW. This results in a DC/AC ratio of 1.3. In practice, a ratio of 1.1 to 1.2 is recommended, which corresponds to around 27.5 to 30 kWp.How loud is the inverter in operation?In standby mode, the inverter remains virtually silent as the fans only start up when required. In normal operation, the noise level is below 55 decibels, as specified by the manufacturer. The device is therefore well suited for basements and utility rooms.Can settings and firmware updates be carried out via app?Yes, all settings can be controlled remotely via the Deye Cloud or the SUN APP. This includes changes to charging and export parameters, firmware updates for inverters, BMS and HMI as well as a possible emergency shutdown of the device. The connection is made via WLAN, LAN or the factory hotspot network. Scope of delivery: Deye SUN-25K-SG01HP3-EU-AM2 (25 kW HV hybrid inverter) 1 x Deye SUN-25K-SG01HP3-EU-AM2 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 25 kW output, integrated LCD touchscreen and three MPPT trackers for demanding photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

Highlights at a glanceMassive power: 100 kW rated power for large solar installations in commerce, industry and solar parksMaximum efficiency: Peak efficiency up to 98.7% for highest yieldsFlexible design: Up to 6 MPP trackers for optimised energy yield with different module layoutsRobust design: Protection class IP65 for use under demanding environmental conditionsIntelligent connectivity: Extensive monitoring and communication options via RS485, Wi-Fi, Ethernet and optional GPRS/4GComprehensive protection: Integrated safety functions including overvoltage protection, short-circuit and residual current monitoringEfficient energy conversion for modern requirementsThe Deye SUN-100K-G03 has been specifically developed for the high demands of modern, large-scale photovoltaic systems. With three-phase output power and a maximum efficiency of up to 98.7%, the inverter ensures that a maximum proportion of the generated direct current is converted into grid-compliant alternating current, with minimal losses. Thanks to support for a wide MPPT voltage range from 200 V to 850 V, the system remains efficient under different irradiation conditions.Flexibility and scalabilityThanks to its up to 6 independent MPP trackers, the Deye SUN-100K-G03 enables optimal adaptation to differently oriented solar module fields or partial shading. This makes it ideal for complex rooftop installations or ground-mounted systems with variable module layouts. In addition, the robust technical design allows flexible system configuration for a wide variety of project requirements.Reliability and protectionWith its IP65 protection rating, the inverter is optimally protected against dust and water. High-quality components, a wide operating temperature range from -25 °C to +60 °C (with power derating above 45 °C) as well as an intelligent air cooling system ensure long-lasting and stable operation, even under demanding conditions. Integrated protection mechanisms such as overvoltage and short-circuit protection, anti-islanding function and residual current monitoring guarantee maximum safety for the system and the grid.Who is the Deye SUN-100K-G03 suitable for?This inverter is ideal for: Operators of large solar installations who focus on maximum energy yields and high profitabilityCommercial businesses and industries with high self-consumption or full feed-in to the gridSolar park operators who rely on reliable performance and extensive monitoring functionsAgricultural businesses with large energy needs and area potential for PV installations  ModelDEYE SUN 100K-G03 Input data of the PV strings Max. DC input power (W)150000 Max PV input voltage (V)1000 Starting voltage (V)250 MPPT voltage range (V)200-850 Full load MPPT voltage range (V)500-850 PV input current (A)40+40+40+40+40+40 Max. PV short-circuit current (A)60+60+60+60+60+60 Number of MPPT6 Strings per MPPT4+4+4+4+4+4 AC output data AC rated power and UPS power (W)100000 Max. AC output power (W)110000 AC output rated current (A)151.5/144.9 Maximum AC output rated current (A)166.7/159.4 Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency98,80% Euro efficiency98.20% MPPT efficiency99,90% Protection Overvoltage categoryDC Type II/AC Type II Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, CEI 0-16, EN 50549, NRS 097, RD 140,UNE 217002, OVE Guideline R25, G99, VDE-AR-N 4105, VDE-AR-N 4110 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-25~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; RS232 Weight (kg)81 Size (mm)824B×516H×312.7T Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs about the 100 kW Deye three-phase string inverterHow many MPP trackers does the inverter have?The Deye SUN-100K-G03 features up to 6 independent MPP trackers, ideal for complex system layouts.What is the device's maximum efficiency?The inverter achieves an impressive maximum efficiency of up to 98.7%.What voltage range does the MPPT support?The MPPT voltage range is between 200 V and 850 V, allowing a wide range of module configurations.Can the inverter also be operated at high ambient temperatures?Yes, it is suitable for temperatures from -25 °C to +60 °C. Above 45 °C, the power is gradually derated to protect the lifespan.Does the inverter provide integrated protection mechanisms?Yes, the SUN-100K-G03 features comprehensive protection functions including overvoltage protection (DC/AC), short-circuit and residual current monitoring, anti-islanding and more. Scope of delivery: Deye Sun SUN-100K-G03 Three-phase string inverter 100KW 1 x Deye SUN-100K-G03 inverterThree-phase device with an AC output power of 100 kW, equipped with multiple MPP trackers for maximum efficiency in industrial applications.1 x Wall Mounting BracketA reinforced mounting rail specially designed for the high weight of the device for safe wall or frame installation.1 x Wi-Fi / LAN / GPRS Stick (Data Logger)A plug-and-play communication module for remote monitoring of system data and performance values via the Deye Cloud or app.1 x set of DC connection plugs (MC4-compatible)The full number of PV connector pairs (plus and minus) for connecting all strings to the DC inputs of the inverter.1 x set of mounting materialIncludes stainless steel screws to secure the housing to the bracket and heavy-duty expansion bolts for firm installation into the substrate.1 x Operating and Installation ManualA detailed manual with technical specifications, wiring diagrams, installation instructions and safety information.1 x Warranty CardThe official document for product registration and claiming manufacturer's warranty rights.

The Deye SUN-10K-SG01HP3-EU-DM2 is a powerful, three-phase high-voltage hybrid inverter that serves as the heart of modern photovoltaic systems in detached houses. With an AC output power of 10 kW it enables highly efficient energy use through the combination of solar power generation, intelligent battery charging and a reliable emergency power supply.This model of the SG01 series is specifically optimised for operation with high-voltage battery storage. The higher system voltage minimises conversion losses, which increases the overall efficiency of your system. Whether you want to optimise self-consumption, achieve zero feed-in or run in off-grid mode – this inverter offers the right solution for every scenario.Highlights at a glanceHigh-voltage battery support: Compatible with storage systems in the range of 160 V to 700 V, which ensures maximum efficiency during charging and discharging.100% unbalanced load capability: Each of the three phases can be loaded independently with up to 100% of the rated output—ideal for uneven household consumption.2 MPPT trackers: Enables flexible design of two module strings for optimal yields even with different roof pitches or partial shading.UPS function (backup): Guarantees an uninterrupted power supply in case of grid failure with an extremely fast switchover time of less than 10 ms.Smart Load & AC coupling: Intelligent output for controllable loads (e.g. heat pump) and the option to integrate existing PV inverters into the system.Colour touch display: Simple configuration and visualisation of all performance data directly on the device through a user-friendly interface.Parallel operation: Supports parallel operation of up to 10 units to scale the system capacity as needed in the future.Areas of applicationThe SUN-10K is the all-rounder for the modern home:Detached houses with storagePerfectly matched to high-voltage batteries such as the Deye BOS-A series or Pylontech Force H2 to maximise the degree of self-sufficiency.Emergency power backupReliably protects important household devices such as heating pumps, refrigerators and lighting against power failures.Sector couplingIntelligent control of wallboxes or hot water heating elements via the Smart Load contact when there is a solar surplus.Installation & safety notesBattery compatibilityEnsure that only certified high-voltage storage units are connected. Communication is via the BMS port (CAN/RS485).Heat dissipationInstall the device in a cool, well-ventilated location. Although it is IP65-certified, installing it in a location protected from direct sunlight will extend the life of the components.Protective devicesThe system features integrated DC disconnect switches and a Type II DC surge protector to protect the installation against lightning damage and faults. Properties ModelDeye SUN-10K-SG01HP3-EU-DM2 AC rated output10,000 W (10 kW) Max. DC input power13,000 W Battery voltage range160 V – 800 V (high voltage) Number of MPPT2 (with 2+1 strings) Max. efficiency97.60 % Protection classIP65 (suitable for outdoor installation) CommunicationRS485, CAN, Wi-Fi / Ethernet Warranty10 years (manufacturer dependent)  FAQs on the Deye SUN-10K-SG01HP3Can I operate this inverter with 48V batteries?No.This model is a high-voltage hybrid (HP3). For 48V low-voltage storage, you need the LP3 series from Deye. Operating with the wrong battery voltage can cause damage.Do I need a separate smart meter for zero feed-in?Generally no.Deye usually supplies the appropriate 3-phase smart meter (e.g. Eastron) directly with these hybrid models so the inverter can record the household consumption at the grid connection point.Is the Wi-Fi module included?Yes.A Wi-Fi dongle for integration into the Solarman app or the Deye Cloud Portal is included as standard to enable global monitoring of the system.Can the inverter control a heat pump?Yes.Via the programmable Smart Load output, a signal can be sent to the heat pump (SG-Ready) to store thermal energy when there is sufficient solar output or the battery is full.

The Deye SUN-30K-SG02HP3-EU-AM3 is one of the most powerful three-phase high-voltage hybrid inverters for the commercial and demanding private sector. With a rated output of 30 kW, it serves as a central energy hub that intelligently interconnects photovoltaics, battery storage and the public grid. It is specifically designed to handle large loads while ensuring maximum independence via state-of-the-art storage technology.Thanks to the AM3 platform, this model supports extremely high PV input currents, ensuring compatibility with the latest high-performance solar modules (bifacial or large-format cells). The high-voltage battery system achieves superior energy conversion efficiency and makes the system the ideal choice for sector coupling (PV, heat, mobility).Highlights at a glanceEnormous 30 kW output: Sufficient capacity for commercial enterprises, agriculture or large apartment complexes with high energy demands.High-voltage battery support: Operates in the voltage range of 160 V to 800 V, improving efficiency and reducing installation costs with smaller cable cross-sections.3 MPPT trackers: Allowing flexible configuration of up to three different roof areas or orientations to optimise yield over the whole day.High-current PV input: The AM3 series is optimised for modern PV modules with high input current (up to 36 A per MPPT).True 3-phase emergency power: Provides complete backup power for the entire building with 100% unbalanced load capability in the event of a grid outage.Smart Load & Generator Port: A multifunctional connection for targeted control of high consumption loads (e.g. air conditioners) or integrating an external generator.Robust IP65 housing: Dust-tight and protected against water jets for reliable installation indoors and outdoors.Areas of applicationCommercial & IndustrialReduction of load peaks (peak shaving) and securing critical infrastructure during power failures.Agricultural operationsSupplying energy-intensive equipment such as milking machines, fans, or cooling systems with large-scale PV use.Neighbourhood solutionsCentral inverter for tenant electricity models in conjunction with heat pump cascades and EV charging infrastructure.Mounting & safety notesMassive constructionDue to its weight of 80 kg, installation must be carried out on a load-bearing wall by at least two professionals. Adequate ventilation is imperative for active cooling.Battery systemThe cell is optimised for high-voltage storage racks (e.g. Deye BOS-G Series). Correct communication between BMS and inverter via CAN/RS485 is essential for safe operation.Grid connectionConnection to the public grid and commissioning must be performed by a certified electrician to ensure compliance with local guidelines (e.g. VDE-AR-N 4105). Properties ModelDeye SUN-30K-SG02HP3-EU-AM3 Nominal output30 kW (30,000 Watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-Ion Battery voltage range160 V – 800 V Number of MPP trackers3 MPPT Max. efficiency97.60 % Degree of protectionIP65 (Weatherproof) Special featureSupports parallel operation of up to 10 units  FAQs about the Deye SUN-30K-SG02HP3-EU-AM3Can the inverter be operated in parallel?Yes, up to 10 devices. This enables commercial storage solutions on a megawatt-hour scale, with both output and storage capacity scalable in modules.Does the device support zero export?Yes, precisely configurable. Using the supplied smart meter, the inverter can be configured to ensure no energy is fed into the public grid (Zero Export function).How is the system monitored?Via Solarman Cloud. A WLAN or LAN logger is included as standard, which transmits all performance data to the cloud in real time. Evaluation can be conveniently carried out using an app or web browser. Scope of delivery: Deye SUN-30K-SG02HP3-EU-AM3 (30 kW HV Hybrid Inverter) 1 x Deye SUN-30K-SG02HP3-EU-AM3 inverterA powerful three-phase high-voltage hybrid inverter with 30 kW output, integrated LCD colour touchscreen and three MPPT trackers for large PV systems.1 x Wall Mount BracketA reinforced metal installation rail for secure mounting of the heavy industrial unit on a load-bearing wall structure.1 x Wi-Fi Stick (data logger)A pluggable communication module for Internet connection for remote monitoring via Deye Cloud or Solarman App.3 x Current Transformer (CT)External clamp current transformers for accurate measurement of energy flows at the house connection, required for zero export and local consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the different PV strings to the inverter.1 x set battery connection plugs (High-Voltage)Special high-voltage connectors for safe electrical connection of a compatible HV battery storage system.1 x Communication cable (BMS)A pre-assembled RJ45 data cable for communication between the inverter and the battery management system.1 x Mounting kit (screws and dowels)A set of stainless steel screws and heavy duty dowels for proper installation of the wall bracket.1 x User manualA printed manual with detailed installation instructions, wiring diagrams and safety instructions.

The Deye SUN-3.6K-SG05LP1-EU-AM2 is a compact, single-phase hybrid inverter that has been specially developed for smaller photovoltaic systems in residential buildings. With an AC output power of 3.6 kW it offers the ideal introduction to energy independence by combining solar power generation, battery management and emergency power supply in one device.As part of the SG05 series this inverter is optimised for operation with 48V low-voltage batteries. This makes the system particularly flexible and cost-efficient when selecting storage. Despite its compact design, it features all the "big" Deye features such as the smart load connection and parallel scalability.Highlights at a glanceLow-voltage battery connection: Compatible with common 48V lithium-ion and lead-acid batteries, offering a wide range of affordable storage options.Colour touch LCD: Intuitive operation and real-time monitoring of all energy flows directly at the unit via the integrated display.2 MPPT trackers: Enables the connection of two independent module strings, ideal for roofs with different orientations (e.g. east-west).Excellent backup function: Lightning-fast switch to emergency power in less than 10 ms, so that sensitive devices continue to run without interruption in the event of a power failure.AC coupling possible: Existing solar installations can easily be integrated via the inverter to retrofit them with a storage system.Parallel connection: Up to 16 units can be connected in parallel to flexibly increase system performance as demand increases.Smart load connection: The "Smart Load" port enables targeted control of consumers such as heating rods or pool pumps when there is a surplus of solar energy.Areas of applicationThe SUN-3.6K is the specialist for efficient small-scale systems:Detached houses & flatsPerfect for PV systems up to approx. 4.6 kWp to massively increase self-consumption within the household.RetrofittingYou can add a 48V battery storage system to an existing system without having to replace the old inverter.Critical infrastructureSecuring servers, aquariums or heating controls through reliable UPS function.Installation & safety instructionsBattery protectionAs high currents can flow in 48V systems, please ensure appropriately dimensioned cable cross-sections and a suitable DC fuse between the battery and inverter.Wall mountingThe device is robustly built and designed for wall mounting. Thanks to IP65 protection, installation in protected outdoor areas is also possible.Earthing & lightning protectionEnsure that the system is installed with professional earthing to protect the electronics and connected appliances from surges. Properties ModelDeye SUN-3.6K-SG05LP1-EU-AM2 Nominal output power3.6 kW (3,600 watts) Phases1-phase (230V) Battery typeLow voltage (LV) 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charge/discharge current90 A Max. efficiency97.60 % Protection classIP65** (Weatherproof) Special featureIncluding **connection cable set  FAQs about the Deye SUN-3.6K-SG05LP1Which batteries are suitable for this inverter?Almost all 48V lithium storage units.It works perfectly with common models such as Pylontech (US2000C/US3000C/US5000), Dyness or Deye's own low-voltage batteries. Conventional lead gel batteries can also be configured.Can I use the inverter for a balcony power plant?Technically yes, but it is oversized.While it far exceeds the output of a balcony power plant, it offers the advantage that you can integrate a proper battery and later expand the system to a full rooftop installation.Is the WLAN module for app control included?Usually, yes.Deye usually supplies a Wifi dongle, which allows you to connect the system with the "Solarman" app or Deye's own portal to view yields and consumption worldwide.Can the device start a generator?Yes.Via the signal port, the inverter can send an automatic start command to compatible generators when the battery level is too low and there is no sun. Scope of delivery: Deye SUN-3.6K-SG05LP1-EU-AM2-P (3.6 kW 1-phase hybrid inverter) 1 x Deye SUN-3.6K-SG05LP1-EU-AM2-P inverterA compact single-phase hybrid inverter with 3.6 kW output, integrated colour LCD touchscreen and support for 48V low voltage battery systems.1 x Wall mount bracketA robust metal mounting rail to securely fasten the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.1 x current transformer (CT - Current Transformer)An external hinged current transformer for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of battery connection cables (DC cables)A pair of pre-assembled high-performance cables (red and black) for direct electrical connection of a 48V battery (specific for this bundle version).1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty plugs for proper installation of the wall mount bracket.1 x user manual (User Manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-10K-SG01HP3-EU-AM2 is a state-of-the-art, three-phase high-voltage hybrid inverter specifically developed to maximise self-consumption and increase energy independence in residential and commercial properties. With a rated power of 10 kW, this device combines the functions of a photovoltaic inverter, a battery charger, and an off-grid system in one robust unit.The AM2 series is distinguished by its compatibility with high-voltage battery systems, which significantly increases system efficiency by reducing conversion losses. Thanks to its extremely fast switching time, it also functions as a fully-fledged uninterruptible power supply (UPS), which continues to supply critical loads within milliseconds in the event of a power failure.Highlights at a glanceMaximum efficiency: Support for high-voltage batteries minimises transmission losses and optimises overall system performance.Genuine 3-phase backup power: Provides a full three-phase backup power supply with 100% unbalanced load capability in the event of a mains failure.DC and AC coupling: Flexibly deployable for upgrading existing solar systems (AC side) or for complete new installations (DC side).Intelligent load management: A dedicated "Smart Load" connection allows targeted control of large consumers such as heat pumps or heating rods when there is a PV surplus.Robust IP65 housing: Suitable for indoor and outdoor installation, protected against dust and water jets.Advanced communication: Integrated interfaces for WLAN/LAN monitoring as well as RS485/CAN for precise communication with BMS systems from renowned battery manufacturers.Colour touch LCD: Intuitive operation and direct visualisation of the energy flows directly on the device.Areas of applicationHome optimisationPerfect for households with electric car and heat pump to drastically increase the proportion of solar power in total consumption.Commercial PV systemsUse in smaller commercial enterprises to reduce electricity costs and to safeguard critical IT infrastructure.Agriculture & off-grid solutionsReliable energy supply in regions with unstable power grids or for completely self-sufficient operation.Assembly & safety instructionsBattery compatibilityCheck Deye's compatibility list before installation. The inverter is optimised for high-voltage storage systems; 48V systems cannot be operated with this specific model.Ventilation & coolingWhen wall-mounting, ensure sufficient distance to the sides (min. 30 cm) and top/bottom (min. 50 cm) to ensure optimal heat dissipation.Surge protectionThe device has integrated Type II surge protection for DC and AC, which reduces installation costs and increases safety. Properties ModelDeye SUN-10K-SG01HP3-EU-AM2 Rated output power10 kW (10,000 Watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-ion battery Battery voltage range160 V – 700 V Number of MPP trackers2 MPPT Max. efficiency97.60 % Protection classIP65 (installation outdoors possible) Special featureColour touch display & black start capable  FAQs about the Deye SUN-10K-SG01HP3-EU-AM2Can the inverter be connected in parallel?Yes, up to 10 devices. For higher power requirements, multiple units can be paralleled to scale both AC power and battery capacity.Does the device support zero export?Yes, fully configurable. The inverter can be configured using the supplied smart meter or CT clamps so that no electricity is fed into the public grid (zero export function).Is the WLAN module included in the scope of delivery?Yes, a logger is usually included. The inverter comes as standard with a WLAN stick (LSW-3) for easy connection to the Solarman app. Scope of delivery: Deye SUN-10K-SG01HP3-EU-AM2 – 10 kW / 3-phase hybrid inverter 1 x Deye SUN-10K-SG01HP3-EU-AM2 inverterA three-phase high-voltage hybrid inverter with 10 kW output, integrated LCD touchscreen and two MPPT trackers.1 x wall mount bracketA robust metal mounting rail for secure attachment of the unit to the wall.1 x Wi-Fi plug / data loggerA pluggable communication module for Internet connection for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External sensors for precise measurement of the energy flow at the house connection, required for zero export and self-consumption regulation.1 x set of PV connectors (MC4-compatible)The corresponding pairs of DC plugs (plus and minus) for connecting the solar modules to the inverter.1 x set of battery connection plugsSpecial high-voltage connectors for safe electrical connection of a compatible battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for communication between the inverter and the battery management system.1 x mounting set (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x user manualA printed manual with detailed circuit diagrams, installation instructions and safety information.

The NEP BDM-800 (Northern Electric & Power) is a powerful, dual microinverter specially designed for modern balcony power plants. With a maximum output of 800 Watt it fully exploits the legal feed-in limits and ensures maximum yield.A key advantage of this model over many competitors is the already permanently integrated WLAN module. You do not need an additional base station (like a DTU) to read out the yield data. The inverter connects directly to your home router. Thanks to two independent MPPT trackers, it individually controls two connected solar modules, which optimises the overall yield especially in case of partial shading or different orientations (e.g. east/west).Highlights at a glanceHigh output power (800 watts): Reliably feeds up to 800 VA into the home grid, ideal for maximum yield from standard balcony power plants.Integrated WLAN: No external gateway or additional stick required; the device sends yield data straight to the free NEPViewer app.Two independent MPPT trackers: Guarantees the best yield from each of the two modules, even if one is partially shaded.Integrated NA protection: Complies with the German standard VDE-AR-N 4105 (including integrated relay) for safe and legal operation in Germany.High module compatibility: Handles high input currents and is therefore ideally suited for modern high-performance modules (400W to 600W+ per input).Robust & weatherproof: The aluminium housing is dust- and waterproof to IP67 and built for decades of outdoor use.Areas of applicationThe NEP BDM-800 is the uncomplicated all-rounder for:Balcony power plants (2 modules): The classic "plug & play" unit on the balcony railing for immediate reduction in the electricity bill.Garden & flat roof installation: Ideal, as the unit can be mounted outdoors directly behind the elevated modules thanks to IP67.Smart homes: For users who wish to monitor their electricity generation conveniently and without additional hardware on their smartphone (iOS/Android).Assembly & Safety InstructionsWLAN reception at the installation site: As the WLAN module is located in the metal housing of the inverter, please check with your smartphone before permanent installation whether sufficient WLAN signal from your router still reaches the balcony/roof.Ventilation: The inverter uses its casing as a heat sink. Do not mount it directly on combustible materials and allow space to the rear of the module so that air may circulate.Throttling possible: If your local grid operator still insists on 600 watts, the NEP BDM-800 can usually be throttled in a certified manner via support or the app (and later increased back to 800W). Features ModelNEP BDM-800 Max. recommended PV power**2 x 600 Wp** Maximum output power**800 VA** Number of MPPT / Inputs**2 MPPT** (independent) Max. DC input voltage**60 V** Max. input current (DC)**2 x 17 A** Communication**WiFi integrated** (2.4 GHz) Efficiency (Max.)**97.3 %** Protection class**IP67** (weatherproof) Dimensions (W x H x D)268 x 250 x 42 mm  FAQs about the NEP BDM-800Do I need an extra antenna or a gateway for the app?No. The WLAN module and the antenna are already invisibly integrated in the housing of the BDM-800. You only need to connect the device to your home network (2.4 GHz) via the app during initial setup.Which plugs do I need to connect to the socket?The device usually has a standardised AC connection (often type Betteri BC01). To connect to the socket you need a suitable connection cable "Betteri to Schuko" (or to Wieland plug), long enough for your setup.What happens if my router fails? Will the NEP still produce electricity?Yes, absolutely. The WLAN connection is used purely for reading the statistics and yields in the app. As soon as the sun is shining and there is grid voltage, the inverter feeds electricity into your home grid – completely independently of the internet.

The Hoymiles HMS-800W-2T is the powerful successor to the legendary HM series and sets new standards for modern balcony power plants. With a maximum output power of 800 watts this micro inverter gets the most out of your solar modules and is optimally prepared for the current legislation.The "2T" in the name stands for two independent MPPT trackers. This means you can connect two solar modules, which are controlled completely independently of each other. If one module is in the shade or has a different alignment, the second module still runs at full power. Compared to the previous series, the HMS-800W-2T uses the more stable Sub-1G radio technology (for greater range to DTU) and the new BC05 plug-in system.Highlights at a GlanceHigh output power (800 watts): Delivers a full 800 VA of power into the household grid, making it ideal for the maximum permissible feed-in limit of balcony power plants.Two independent MPPT trackers: Guarantees the maximum yield from each individual module, even with partial shading or different alignment (e.g. east/west).Stable Sub-1G communication: Offers a noticeably more stable and wider-reaching connection through walls when used with an (optional) DTU compared to conventional Wi-Fi.New connection system (BC05): Equipped with the proprietary Hoymiles "Field Connector" (BC05) for rapid and extremely watertight installation.Reactive power control: Complies with the VDE-AR-N 4105:2018-11 standard and supports grid stability by providing reactive power.Robust design (IP67): The fully sealed housing is dust- and waterproof and designed for decades of outdoor use in the harshest conditions.Flexible limiting: Using an optional DTU unit, the output can be temporarily restricted to 600 watts via app (S-Miles Cloud) if required.Areas of ApplicationThe HMS-800W-2T is the standard solution for:Balcony power plants (2 modules): The classic – two modules on the balcony railing for maximum self-sufficiency covering your electricity needs.Garages & Carports: Thanks to high protection class IP67 can be safely used on flat roofs.Garden sheds: Easy installation “Plug & Play” (with suitable Schuko cable).Shaded locations: Where a string inverter would fail, the HMS-800 still extracts energy thanks to single MPPT.Mounting & Safety InstructionsCable selection (Important!): The HMS-800W-2T uses the new BC05 connection (rectangular, flat). It is not compatible with the old Betteri BC01 cables from the HM series. When purchasing the connection cable, be sure to look for the note "for HMS series" or "BC05".Distance to the surface: Mount the inverter with at least 2 cm distance to the mounting surface (roof/wall) so that air can circulate behind the unit (passive cooling).Hot Spot: The metal housing acts as a heat sink and in summer at full load can become up to 80°C hot. This is normal, but avoid touching during operation.Earthing: The device is earthed via the AC connection. Additional grounding on the housing is possible, but not usually mandatory if a compliant Schuko/Wieland cable is used (observe local VDE standards). Features ModelHoymiles HMS-800W-2T Max. recommended PV power**320 W to 540 W+** (per module) Maximum output power**800 VA** (adjustable to 600 VA) MPPT number / inputs**2 MPPT** / 2 DC inputs Max. DC input voltage**65 V** Max. input current (DC)**2 x 14 A** (Compatible with modern 500W+ modules) Communication**Integrated Wi-Fi** (2.4 GHz) AC connection**BC05 connector** (HMS series) Efficiency (CEC)**96.7 %** Protection class**IP67** (dust-tight & protection against temporary submersion) Dimensions (W x H x D)261 x 180 x 35.1 mm FAQs about the Hoymiles HMS-800W-2TWhat is the difference with the Hoymiles HM-800?The HMS is the newer generation. The main differences are:Radio: HMS uses Sub-1G (better range) instead of 2.4 GHz (HM).Connection: HMS uses the BC05 connector, HM uses Betteri BC01.Amperage: The HMS tolerates higher input currents (14A), making it more compatible with modern high performance modules (400W+).Do I necessarily need a DTU (Data Transfer Unit)?For pure operation ("generate power"): No. As soon as the sun shines and the grid is present, it generates power. For monitoring (app) and settings (throttling to 600W): Yes. As the HMS-800W-2T does not have integrated Wi-Fi, you need the DTU-Lite-S stick for app connection.Can I limit the inverter to 600 watts?Yes. When used together with a DTU and an installer account in the S-Miles Cloud, the output power can be limited as a percentage (e.g. to 75% = 600W) to comply with current registration requirements.