Deye Sun 50K-SG01HP3-EU-BM4 Three-phase hybrid inverter 50KW

The Deye GB-L-PRO20 is a powerful and highly flexible high-voltage energy storage system that has been specially developed for modern photovoltaic systems in homes and small businesses. With a gross capacity of 20.45 kWh it provides a massive energy reserve to maximise independence from the public grid and reliably supply even large households or commercial operations.The system is supplied including the GBL-PRO BMS, which, as an intelligent control unit, monitors the entire tower. Thanks to the advanced lithium iron phosphate technology (LiFePO4), the system guarantees maximum safety with a long service life. The simple stack assembly enables quick installation without complex cable connections between the modules.Highlights at a glanceHigh safety: The cobalt-free LiFePO4 chemistry ensures maximum safety, thermal stability and a long cycle life of over 6000 cycles.Central GBL-PRO BMS: The intelligent control unit monitors each cell individually and protects the overall system against overcharging, deep discharge and thermal problems.Simple installation: Thanks to the modular "plug-and-play" design, the stack assembly is quick and requires no additional cable connections between the battery modules.Efficient high-voltage technology: The high system voltage reduces conversion losses and optimises efficiency when combined with modern hybrid inverters.Emergency power capability: Supports high discharge rates to ensure the safe supply of critical loads or entire households even during power outages.Robust design: With protection class IP65, the system is dustproof and protected against water jets, enabling installation in various environments.Areas of applicationThe GB-L-PRO20 is the ideal storage solution for demanding energy concepts:Optimisation of in-house electricityStorage of surplus solar power during the day for use in the evening and at night, even with high base consumption.Backup power supplyIn conjunction with compatible hybrid inverters, the system offers protection against grid failures (blackout prevention) for the entire house.Peak load shavingReducing electricity costs by buffering peak loads, especially in households with multiple e-charging stations or heat pumps.Installation & safety instructionsSite selectionPlace the storage system on a level, load-bearing surface (pay attention to weight). Ensure sufficient ventilation and observe the recommended minimum distances.Protection against extreme temperaturesAlthough the system is designed for a wide temperature range, installation in cool, frost-free indoor spaces (e.g. basement or technical room) extends the life of the cells.Professional commissioningThe electrical connection to the inverter and the configuration of the GBL-PRO BMS may only be carried out by certified specialist personnel. Properties Model**Deye GB-L-PRO20** Nominal energy**20.45 kWh** Nominal voltage**512 V** (high voltage) Battery typeLithium iron phosphate (LiFePO4) Max. charge/discharge current50 A Usable energy (90% DoD)18.41 kWh Degree of protection**IP65** (indoor/outdoor installation) Cycle life≥ 6000 cycles (@25°C, 90% DoD) CertificationsCE, IEC62619, VDE2510-50, UN38.3  FAQs about the Deye GB-L-PRO20 battery systemCan I expand the system with additional modules later?Yes.Thanks to the modular system, you can flexibly adapt the capacity of your storage system. The GBL-PRO BMS automatically detects new modules and integrates them into the battery management.Which inverters is the system compatible with?Primarily with Deye hybrid inverters.The system is optimally matched to Deye high-voltage hybrid inverters. Please check the current compatibility list for third-party devices before installation.Why is LiFePO4 used as a cell chemistry?Because of its superior safety.In contrast to conventional lithium-ion batteries (NMC), LiFePO4 is much more chemically stable. Even in the event of mechanical damage, these cells are not prone to ignition.Does the system have integrated heating for winter operation?Yes, optional.The Deye GB-L-PRO20 system supports an integrated heating function that allows the battery cells to be charged safely even at low ambient temperatures. This effectively protects the cells when installed in unheated rooms.What is the maximum discharge power of the 20.45 kWh system?Depends on module configuration.Thanks to the high-voltage technology, the system can provide high discharge currents. As a rule, this 20.45 kWh package allows a continuous output of approx. 10 kW to 15 kW, ideal for wallboxes or air conditioning systems. Scope of delivery Deye GB-L-PRO20 Modular high-voltage battery system (20.45 kWh): System compositionThis product is a set and consists of six separate main components, which together form a 20.45 kWh high-voltage tower system.Component 1: Deye GBL-PRO BMS (high-voltage control unit & base)The central control unit (BMS) that manages the entire high-voltage system. This unit forms the base of the battery tower.Components 2 to 6: Five Deye GB-L-PRO-BATT high-voltage battery modules (each 4.09 kWh)Five high-voltage battery modules each with 4.09 kWh that are stacked on the BMS unit and on top of each other.1 x set battery connection cables (plus & minus)A pair of special high-voltage power cables for connecting the BMS unit to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the BMS and the inverter.4 x connecting bridge / series connection cableShort, robust cables or fixed bridges to connect the five battery modules in series.1 x earth cableA protective conductor cable for proper earthing of the BMS unit.1 x mounting accessories (tower assembly)Includes screws or locks to securely connect the six components into a tower.1 x operation and installation manualA printed manual describing the installation of the entire high-voltage tower system.

The Deye BOS-G 60 PRO high-voltage storage set is a reliable and powerful storage solution for commercial applications and demanding private households. With a total capacity of 61.44 kWh, modular expandability and intelligent battery management, it fulfils the highest requirements for safety, efficiency and flexibility.Highlights at a glanceHigh capacity: 61.44 kWh gross storage capacity for large energy systemsUsable energy: 55.30 kWh at 90 per cent depth of dischargeFlexible scalability: Up to 16 battery racks can be operated in parallelIntelligent control: Integrated BMS protects against overcharging, deep discharge and overheatingEasy to use: Quick installation in 19-inch rack formatEfficient energy storage for modern projectsThe BOS-G 60 PRO offers an excellent foundation for integration into existing energy systems with its high voltage of 614.4 volts and a wide operating voltage range of 528 to 700.8 volts. The lithium iron phosphate technology used ensures high safety, low self-discharge and a long service life.Modular and customisableThe system architecture allows flexible expansion to up to 16 parallel battery racks and AC parallel operation of up to 10 Deye inverters. This means that the system can be precisely adapted to increasing requirements and remains expandable in the long term.Safe energy managementThe integrated BMS continuously monitors cell voltages, temperatures and charge levels. It actively protects against critical operating states and optimises the service life of the battery units through automatic cell balancing.Who is the Deye BOS-G 60 PRO suitable for?The high-voltage storage set is ideal for:Commercial enterprises with high energy consumption or emergency power requirementsLarge photovoltaic systems focusing on optimising self-consumptionPrivate households with above-average energy requirementsProject developers who require a modular, certified high-voltage system  ModelDEYBOS-G-PRO Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 Max. battery module number in series (optional)5-16 System nominal voltage (V)256-819.2 System operating voltage (V)220~934.4 System capacity (kWh)25.6-81.92 System usable capacity (kWh)23.04-73.73 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - Nominal value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)125 Operating temperature (°C)Charge: 0 ~ 55 / Discharge: -20 ~ 55 Display system indicator Yellow : Battery High VoltagePower On Red : Battery System Alarm Communication connectionCAN2.0, RS485 Humidity5% ~ 85%RH Altitude≤3000m IP protection class of the housingIP20 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)530 * 602 * 2219 Weight (kg)290-837 Installation locationFloor mounting Recommended depth of discharge90% Cycle lifetime25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3 / CE / CE-EMC / IEC62040 / CEC / VDE  FAQs about the Deye BOS-G 60 PRO high-voltage storage setWhat storage capacity does the BOS‑G 60 PRO provide and how much of it is usable?The set consists of 12 LiFePO₄ modules, each with a gross capacity of 5.12 kWh, giving a total storage capacity of 61.44 kWh. Thanks to the recommended 90% depth of discharge (DoD), around 55.3 kWh of usable net energy is available, ideal for large private households or commercial applications.What protection and management functions does the BMS perform?The integrated battery management system (BMS) continuously monitors and protects against overvoltage, undervoltage, overcurrent, short circuit and temperature deviations. It also actively balances all cells and ensures optimal charging and discharging conditions.Which electrical parameters (voltage & current) are relevant?Operating voltage: between 528 V and 700.8 V, nominal voltage at 614.4 V DCMaximum continuous current: 100 AShort-term peak current: 125 A (approx. 2 minutes)Is the system modularly expandable?Yes, the modular concept makes it possible to operate several BOS‑G 60 PRO storage units in parallel. Up to 16 tanks (racks) in series and up to 10 inverters in the AC network are possible to scale capacity and redundancy as required.In which temperature range can the storage system be operated?Discharge: from −20 °C to +55 °CCharge: from 0 °C to +55 °C This makes the system suitable for a wide range of climate zones, from cold garages to warm attics. Scope of delivery Deye BOS-G60 PRO high-voltage storage set (61.44 kWh) with rack system: System compositionThis product is a set and consists of a rack cabinet and the 13 individual slide-in modules (1x BMS and 12x batteries).Component 1: Deye rack system / battery cabinetA cabinet to hold the BMS unit and the battery modules, often with rollers and feet.Component 2: Deye control box / BMS slide-in moduleThe central control unit (BMS/BCCB), which is inserted into the rack cabinet as a module.Component 3 to 14: Twelve Deye BOS-G-PRO-Pack5.1 high-voltage battery slide-in modules (each 5.12 kWh)Twelve pure high-voltage battery modules, which are also inserted into the rack cabinet.1 x set of battery connection cables (plus & minus)A pair of special high-voltage power cables to connect the BMS module to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A long data cable for communication between the BMS module and the inverter.12 x connection bridge / series connection cableShort, robust cables or fixed bridges to connect the thirteen slide-in modules (BMS + 12 batteries) in the rack with each other.1 x earthing cableA protective conductor cable to earth the rack system in accordance with regulations.1 x mounting accessories (rack mounting)Includes screws and rails for fixing the modules inside the rack as well as material for anchoring the cabinet to the floor.1 x operating and installation manualA printed manual describing the assembly of the complete rack system.

The JA Solar JAM54D40 455/LB bifacial solar module is part of the Deep Blue 4.0 Pro series and has been developed for maximum energy yield, long service life and high efficiency. With the latest n-type technology, bifacial design and double-sided glass structure, the module is ideal for demanding private and commercial photovoltaic systems.Highlights at a glancePowerful: 455 W rated power with up to 22.6% module efficiencyBifacial energy yield: Rear side efficiency up to 80% (±5%)High reliability: Over 6,000 charge cycles at 70% EOL powerLow degradation: Only 0.4% power loss per year over 30 yearsRobust design: Double glass module with 1.6 mm glass thickness front and rearDurable: 25 years product warranty, 30 years performance guaranteeState-of-the-art n-type cell technologyThe module is based on n-type Bycium++ cell technology with 16 busbars (MBB half-cell). This reduces the power loss caused by light-induced degradation (LID) and ensures better performance in low light conditions as well as a higher overall energy yield.High performance under real conditionsThe JAM54D40 455/LB delivers strong performance not only under standard test conditions, but also at high ambient temperatures, low irradiation and when used bifacially. The bifacial rear-side absorption can achieve an additional yield of up to 30% with optimum installation.Robust construction for high loadsThe module is designed for a maximum static front load of 5400 Pa and a back load of 2400 Pa. The junction box is IP68 rated, ensuring a safe operation under a wide range of weather conditions. Suitable for applications from -40 °C to +85 °C.   Electrical parameters at STC Maximum rated power (Pmax) (W)455 Open-circuit voltage (Voc) (V)39.50 Maximum power voltage (Vmp) (V)33.00 Short-circuit current (Isc) (A)14.56 Maximum power current (Imp) (A)13.79 Module efficiency (%)22.8 Operating conditions Maximum system voltage1500V DC Operating temperature–40°C ... +85°C Maximum rated power of series fuse30A General data Dimensions (W / H / D)1762/1134/30mm Weight22 kg   Who is the JA Solar JAM54D40 455/LB suitable for?Installers and system planners focusing on performance and durabilityOperators of rooftop systems wanting to benefit from additional bifacial yieldCustomers looking for a visually appealing full black solution with high energy yieldProjects with demands for low degradation and high environmental resilienceFrequently asked questions (FAQ) about the JA Solar JAM54D40 455/LBWhat does "bifacial" mean for this module?The module uses bifacial cells that are light-sensitive on both the front and rear sides. This means that reflected light from the rear side can also be converted into electricity, which can increase energy yield by up to 30 percent depending on the installation environment.What is the difference between n-type and p-type cells?n-type cells, as in the JAM54D40 455/LB, have higher efficiency, lower light-induced degradation (LID) and better low-light performance compared to conventional p-type cells.How large is the module and how much does it weigh?The module measures 1134 × 1762 × 30 mm and weighs 22 kg. It features a double glass design with 1.6 mm glass thickness on the front and rear sides.How long is the warranty?JA Solar offers 25 years product warranty and 30 years linear performance guarantee with a maximum annual degradation of only 0.4 percent.Is the module suitable for use in extreme climate zones?Yes, the module is designed for operating temperatures from -40 °C to +85 °C and can withstand a front load of up to 5400 Pa and a back load of up to 2400 Pa. The junction box is rated to IP68.Which inverters is the module compatible with?The module is compatible with all standard inverters designed for a system voltage of up to 1500V DC. The junction boxes are equipped with MC4-EVO2 connectors.What is the best way to install the module?The module is suitable for both rooftop and ground-mounted systems. It can be installed in landscape or portrait format. The cable length is adapted to the orientation in each case.How robust is the module against environmental influences?Thanks to its glass-glass design and black aluminium frame, the module withstands extreme loads, designed for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The rear foil and robust frame construction provide reliable protection against moisture and environmental influences.  

The SOLR6100 solar cable (100 metres, 6mm²) in red is the professional solution for photovoltaic installations where maximum efficiency and minimum resistance are paramount. With a length of 100 metres per roll and a reinforced cross-section of 6mm², this cable is ideal for large rooftop installations, ground-mounted projects, or systems with high current ratings. The red marking allows standard-compliant identification of the positive pole (+) and ensures clear cabling.Certified according to the international standard IEC 62930, this cable provides the highest safety for modern PV systems with voltages up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section greatly reduces electrical resistance and ensures higher yield compared to standard cables.Certified safety: Conforms to IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.High coverage: 100 metres in one piece allow for individual cuts for custom string connections without unnecessary junctions.Extremely durable: High quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a service life of over 25 years.Corrosion-protected conductor: Fine stranded, tinned copper provides consistently optimal conductivity and protection against oxidation in humid environments.Wide temperature range: Safe operation under extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLR6100 is the first choice for demanding PV projects:Large rooftop systems & PV parksEfficient string cabling and connecting distant module fields to the central inverter.High-performance balcony systemsIdeal for systems with modern modules (500Wp+), to transport high currents without loss.Battery storage & off-grid systemsPerfect for 24V or 48V systems where minimal voltage drops are crucial for charging efficiency.Installation & safety instructionsProfessional connectionUse only MC4 connectors explicitly approved for 6mm² cable with this cross-section and a high-quality crimping tool.Mechanical protectionWhen routing on the roof or through walls, use corrugated conduits or cable ducting to protect the insulation from mechanical abrasion and rodent damage.Parallel cable routingRun positive (red) and negative (black) cables as parallel and close as possible together, to minimise electromagnetic interference (induction loops). Features Model / SKU**SOLR6100** Conductor cross-section**6.0 mm²** Form of supply**100 metre roll** ColourRed (positive pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV & ozone resistant  FAQs on the red solar cable 100m 6mm²Why should I choose 6mm² instead of 4mm²?For higher yield and future-proofing. Especially with cable lengths over 15–20 metres or when using modules with high current (Isc over 13A), the voltage drop with 6mm² is noticeably lower. This means that more energy reaches the inverter and the cable remains cooler under high load.Can the cable be laid directly in the ground?Only in a protective conduit. Although the insulation is very robust, the cable is not designed for direct burial without protection. In suitable cable protection conduit, however, laying in the ground is no problem.Is the cable resistant to chemicals?Yes. The XLPO insulation is resistant to acids, alkalis, and ammonia. This makes it especially suitable for installations in agriculture (barns) or in areas affected by industrial pollution.

The solar cable SOLS6100 (100 metres, 6mm²) in black is the professional solution for photovoltaic installations where maximum efficiency and minimal resistance are paramount. With a length of 100 metres on a reel and a reinforced cross-section of 6mm², this cable is excellent for large roof systems, open-area projects or systems with high currents. The black identification enables standard-compliant identification of the negative pole (-) and ensures clearly arranged cabling.Certified in accordance with the international standard IEC 62930, this cable offers maximum safety for modern PV systems with voltages of up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section significantly reduces the electrical resistance and provides more yield compared to standard cables.Certified safety: Complies with IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.Long range: 100 metres in one piece enable custom cuts for tailor-made string connections without unnecessary separation points.Extremely resistant: The high-quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a lifespan of more than 25 years.Corrosion-protected conductor: Fine-stranded, tinned copper offers permanently optimum conductivity and protects against oxidation in a damp environment.Wide temperature range: Safe operation in extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLS6100 is the number one choice for demanding PV projects:Large roof systems & PV parksEfficient string cabling and connection of distant module fields to the central inverter.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to ensure the loss-free transport of high currents.Battery storage & stand-alone systemsPerfect for 24V or 48V systems where low voltage drops are crucial for charging efficiency.Assembly & safety instructionsProfessional connectionsFor this cross-section, use only MC4 connectors that are explicitly approved for 6mm² cable, and use high-quality crimping pliers.Mechanical protectionWhen laying on the roof or through walls, use corrugated ducts or cable ducts to protect the insulation from mechanical abrasion and rodent bites.Parallel cable routingRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields (induction loops). Features Model / SKU**SOLS6100** Conductor cross-section**6.0 mm²** Delivery form**100 metre reel** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV- & ozone-resistant  FAQs about solar cable black 100m 6mm²Why should I choose 6mm² instead of 4mm²?For more yield and future-proofing.Especially for cable lengths above 15–20 metres or when using modules with high current (Isc above 13A), voltage drop is noticeably lower with 6mm². This means more energy reaches the inverter and the cable stays cooler under high load.Can the cable be laid directly in the ground?Only in protective conduit.Although the insulation is very robust, the cable is not designed for direct burial without protection. Installation in a suitable cable conduit in the ground, however, is no problem.Is the cable resistant to chemicals?Yes.The XLPO insulation is resistant to acids, alkalis and ammonia. This makes it particularly suitable for agricultural (stables) or industrially impacted areas.