Crane

Spare battery for

This NiMH high-performance battery is the most powerful replacement solution for Hetronic radio remote controls that operate on 3.6 volts. It replaces the original batteries with the numbers 68300600, 68300900 as well as 68300800.With a capacity of 2,100 mAh (2.1 Ah) this battery offers the technical maximum for this size. Compared to older standard batteries (often 1,200 mAh), you get almost double the runtime. It is frequently used in the Ergo, Nova-S (3.6V versions) and certain Mini variants.Highlights at a glanceMaximum capacity (2.1 Ah): With 2,100 mAh, this battery is a true long-lasting performer. It is ideal for applications where the transmitter must be used for very long periods (e.g. multi-shift operation) without charging.Specific 3.6V voltage: Designed for the 3-cell Hetronic systems. It is not compatible with the 9.6V devices, although it looks similar at a glance. Voltage is crucial.Full replacement for 68300xxx: Replaces directly the original numbers 68300900 (NiMH), 68300600 (NiCd) and 68300800.Environmentally friendly upgrade: Modern NiMH technology eliminates the memory effect of old NiCd batteries (68300600) and avoids toxic cadmium. You can recharge the battery flexibly at any time.Fit accuracy: Has the typical (mostly black) housing with the specific contacts for the 3.6V slot in the transmitter.Compatible transmitters (extract)Please check the nameplate of your transmitter or the old battery for the voltage 3.6V before purchasing:Hetronic Ergo: Ergo, Ergo-F, Ergo-M (transmitter in "banana shape").Hetronic Mini (3.6V): Rarer than the 9.6V version, but occurs.Hetronic Nova-S / Nova-M (3.6V): Special versions.Hetronic GL (3.6V): Older models. Characteristics ModelReplacement battery for Hetronic 3.6V (High-Power Version) Replaces original no.**68300800**, 68300850, 68100800 (Note: 68300900 is usually 9.6V!) Chemistry**NiMH** (Nickel-Metal Hydride) Voltage**3.6 V** (3 cells) Capacity**2100 mAh (2.1 Ah)** – Maximum configuration (standard often only 1200 mAh) Compatible transmitters (extract)Hetronic **MINI-HET**, **POCKET**, **ERGO**, **GR** (Only 3.6V versions!) Form factorCompact black block (approx. 80g), fits into small battery compartments High-Power advantageAlmost **double the runtime** compared to the standard battery – ideal for long shifts ContactsSpecific Hetronic contacts (please compare with the original) Weight (g)approx. 90 - 110  FAQs about the Hetronic 3.6V 2100mAh batteryMy old battery only has 1200 mAh. May I use 2100 mAh?Yes, absolutely. The higher capacity (mAh) is merely a larger "tank". The voltage (3.6V) remains the same. Your transmitter lasts noticeably longer with this battery than the original, with no risk to the electronics.Warning—risk of confusion: 3.6V or 9.6V?This is the most important point with Hetronic:Part number 68300900 / 68300600: This is this battery (3.6V).Part number 68300500 / 68300520: This is the 9.6V battery (looks almost the same!). Please check the number on your old battery closely. The systems are not compatible with each other.Why does it say "HTC" in the description?"HTC" is often used in industry as an abbreviation for Hetronic. It has nothing to do with the smartphone manufacturer. If your battery reads "HTC" and a number starting with 683..., it is a Hetronic battery.

Spare battery for

This NiMH high-performance battery is the perfect replacement for the distinctive orange battery blocks of the HBC Radiomatic radio remote controls. It replaces the obsolete NiCd batteries (type BA222060) and the standard NiMH batteries (type BA203060). With a rated voltage of 6.0 Volt and an increased capacity of often 2,000 mAh to 2,100 mAh (instead of often only 1,500 mAh in the past), this battery ensures that your construction crane or concrete pump remains reliably controllable even during long shifts.Highlights at a glancePowerful upgrade: The modern cells offer up to 30% more runtime than the old standard batteries. This minimises work interruptions for battery changes.Full compatibility: Replaces the HBC original numbers identically BA222060, BA203060, BA203061 and FuB 3A, FuB 03A and PM 471560.Modern NiMH technology: The battery does not suffer from the memory effect of the old NiCd generation. It is more environmentally friendly (cadmium-free) and can be recharged flexibly.Robust housing: The housing (usually in the typical HBC orange or black colour) is shock-resistant and designed for harsh construction site use and temperature fluctuations.Suitable for your charger: The battery is fully compatible with the original HBC chargers (e.g. QE10860, QA10860 or the intelligent chargers of the IL series), provided they support 6V NiMH.Compatible transmitter series (extract)This battery pack fits a large number of the well-known "large" HBC transmitters:Spectrum series: Spectrum 1, Spectrum 2, Spectrum 3, Spectrum A/BMicron series: micron 5, micron 7Eco series: ecoTechnos series: technos 2Linus series: linus 4, linus 6Other: quadrix, keynote, patrol, vector, cubix (please check voltage!) Features ModelReplacement battery for HBC Radiomatic 6V Replaces original no.**BA222060**, **BA203060**, BA203061, FuB 3A, PM 471560 Field of applicationConstruction cranes (Liebherr, Potain), concrete pumps (Putzmeister, Schwing) Chemistry**NiMH** (nickel metal hydride) Voltage6.0 V (5 cells 1.2V each) Battery capacityTypical **1500 mAh to 2100 mAh** (original NiCd often only had 700 mAh) Compatible transmitters (extract)spectrum 1, spectrum 2, spectrum 3, patrol D, eco, linus 4/6, technos DesignRectangular block (typical HBC orange) with 2 contact surfaces at the top Charging informationFits into standard chargers (e.g. QE108600, QA108600) Special featureAttention: Do not confuse with the almost identical looking 3.6V model! Weight (g)approx. 210 - 230  FAQs about the HBC BA203060 / BA222060Can I replace the old NiCd battery (BA222060) with this NiMH battery?Yes, absolutely. HBC has largely discontinued the production of NiCd. This NiMH battery is the official successor. It fits perfectly mechanically and offers more power. Your transmitter will work perfectly with it.Does my old charger recognise the new battery?Yes in 95% of cases. HBC chargers (the large black cubes or the plates in the control cabinet) are usually designed for NiCd and NiMH. Make sure that the charge indicator light switches correctly (charge -> full). As the new battery has more capacity, charging takes a little longer than with the old one.What is the difference to the small BA225030?Attention: There is a very similar looking battery (BA225030 / BA225000), but it is smaller and has only 3.6 Volt (3 cells). The battery described here BA203060 has 6.0 Volt (5 cells) and is larger. If in doubt, count the contacts or look at the type plate in the battery compartment.

Spare battery for

This NiMH battery is a specific replacement for the 6-volt systems from HBC Radiomatic, which are often used in more compact handheld transmitters (such as quadrix, keynote or vector) are used. Although it outwardly looks very similar to the widely used 3.6V batteries (FuB 05A), this pack provides 6.0 Volt.It replaces the original HBC batteries with the designations BA206000, BA206030, BA226030 as well as the types FuB 05XL, FuB 05N and the part number PM237745002. With 1,500 mAh (1.5 Ah) it offers reliable performance for everyday work use.Highlights at a glanceAttention: 6 Volt version! This battery is specially for HBC devices that 6V operating voltage require. It is the more powerful counterpart to the visually almost identical 3.6V batteries (FuB 05AA).NiMH technology: Thanks to nickel-metal hydride cells there is no memory effect. You can charge the battery at any time. It also replaces old NiCd batteries (BA225000/BA226030) if the device can handle 6V.Compact design: Despite the higher voltage (5 cells inside instead of 3) the battery retains its compact format to fit into the corresponding radio transmitters.Compatible designations: The battery is often listed in the market under various numbers, including FuB 05XL (XL often stands for the higher voltage/performance in the small casing), FuB 05N or PM237745002.Important note on voltage (3.6V vs. 6V)Your enquiry also includes numbers for 3.6V batteries (BA205000, BA205030, FuB 05AA). Please be sure to check your device:FuB 05AA / BA205xxx: These are 3.6 Volt batteries.FuB 05XL / BA206xxx: These are 6.0 Volt batteries (this article). Use this 6V battery only if your old battery also had 6V or the type plate on the transmitter indicates 6V. Using 6V in a 3.6V device can damage the electronics! Features ModelReplacement battery for HBC Radiomatic 6V (BA206030) Replaces original no.**BA206030**, BA206000 (old NiCd), BA222060, FuB 3A (often identical in design) Chemistry**NiMH** (Nickel-metal hydride) - No memory effect Voltage**6.0 V** (5 cells) Capacity**1500 mAh (1.5 Ah)** - Solid standard capacity (upgrade to 700mAh NiCd) Compatible transmitters (selection)spectrum 1, spectrum 2, spectrum 3, patrol D, technos, eco (6V versions) FormBlock battery (orange or black), 2 contacts on top Dimensions (L x W x H in mm)approx. 152 x 56 x 19 (standard HBC block size) Charging informationCharge only in HBC chargers (e.g. QE108600, QA108600) Weight (g)approx. 210 - 220  FAQs on the HBC 6V FuB 05XLMy old battery has the number BA205030 (3.6V). Can I use this 6V battery?No, absolutely not. Even if both batteries look mechanically similar, the double voltage (6V instead of 3.6V) would probably destroy your transmitter. If you had BA205..., you absolutely need the 3.6V version.For which transmitters is this 6V battery intended?It is often found in newer or more powerful versions of the series quadrix, keynote, vector or special micron versions. What is always decisive is the type plate on the transmitter.What does 1.5 Ah mean?This stands for 1,500 milliampere hours. This is a solid standard capacity for 6V packs of this size. There are variants with up to 700 mAh (old, NiCd) or up to 2100 mAh (high-end NiMH). With 1.5 Ah you are in the good mid-range and have enough energy for a normal working day.

Crane battery suitable for HBC BA210040, BA211060, BA213020, BA214060, BA214061 NIMH 2x6V 1,5Ah (FuB10AA, FuB10XL, FuB78AA, PM458017, PM471560)

.The HBCBA210040.1500 crane battery is a NiMH pack with 2×6 V and 1.5 Ah for HBC control units BA210040, BA211060, BA213020, BA214060 and BA214061 and ensures a reliable power supply for long periods of use. .

Spare battery for

This NiMH battery is the modern successor to the classic nickel-cadmium batteries (NiCd) from HBC with the designations BA223000 and BA223030. These older batteries often had problems with the memory effect and offered lower capacities.The replacement battery offered here uses modern nickel-metal hydride technology. It fits perfectly mechanically in the compartment of your transmitter (identical design FuB 3A), but delivers more stable performance and is more environmentally friendly. With 6 volt and a capacity of usually 1,500 mAh to 2,100 mAh (depending on the cell chosen), it brings your crane control back up to the performance level of a new device.Highlights at a glanceTechnology upgrade (NiMH instead of NiCd): The biggest advantage: The memory effect is eliminated. You no longer have to fully discharge the battery before charging it. This significantly extends the service life in everyday construction site use.Longer runtime: While the old BA2230xx batteries often only had 700 mAh or 1400 mAh, modern replacement batteries offer 1,500 mAh to 2,100 mAh. This means significantly longer operating times without changing batteries.Full compatibility: Replaces 1:1 the old HBC numbers BA223000 and BA223030 as well as the designation FuB 3A (NiCd). It is mechanically identical to the newer type BA203060 (FuB 03A).Robust housing: The battery comes in a shock-resistant housing (usually HBC orange or black), which is specially designed for harsh use on construction sites.Compatible with chargers: Can be charged with existing HBC chargers (e.g. QE10860, QA10860 or IL series) as these usually support both technologies (NiCd/NiMH).Compatible transmitter series (extract)This 6V block is one of the most widely used batteries at HBC:Spectrum series: spectrum 1, spectrum 2, spectrum A, spectrum BMicron series: micron 5, micron 7Eco series: ecoLinus series: linus 6Technos series: technos 2 Features ModelReplacement battery for HBC Radiomatic (BA223030) Replaces original no.**BA223000** (NiCd), **BA223030** (NiMH), FuB 10AA, BA222060 Chemistry**NiMH** (nickel-metal hydride) – The modern upgrade Voltage**6.0 V** (5 cells) CapacityTypically **1,500 mAh to 2,100 mAh** (depending on the version) Compatible transmitters (extract)HBC spectrum 1, spectrum 2, spectrum 3, patrol D, vector DesignClassic HBC block (orange), 2 contacts on top Charging instructionsFully compatible with existing chargers (e.g. QA108600) Field of applicationConstruction cranes, concrete pumps, forestry radio, industrial cranes Weight (g)approx. 210 – 230  FAQs about the HBC BA223000 / BA223030What is the difference between BA22... and BA20...?This is the HBC code for cell chemistry:BA22xxxx: Old NiCd technology (contains toxic cadmium, memory effect).BA20xxxx: New NiMH technology (more environmentally friendly, more powerful). You can (and should) always replace a BA22 battery with a BA20 battery.My old battery was black, the new one is orange. Is that a problem?No. The colour of the housing varies depending on the production batch or manufacturer of the replacement battery. What matters is only the voltage (6V), the shape (FuB 3A), and the position of the contacts.Do I have to consider anything with NiMH?If you come from NiCd: NiMH batteries do not like deep discharge and extreme heat.Charge the battery when the LED on the transmitter flashes red (do not wait until it is "dead").Do not leave the battery in the blazing hot crane operator’s cab in summer. 

Spare battery for

This NiMH battery is the specific replacement for the somewhat rarer, compact 6-volt batteries from HBC Radiomatic. It often bears the internal designation FuB 9AA (NiMH) or replaces the older FuB 9A (NiCd).It should not be confused with the widely used standard batteries (FuB 3A or FuB 05AA). The BA209060 is used especially in more compact handsets, which nevertheless require 6 volts voltage. With modern nickel-metal hydride technology, it offers reliable power without the memory effect of the old generation.Highlights at a glanceSpecialist for 6V handsets: This battery is precisely designed for HBC transmitters that use the compact format but require 6 volts (in contrast to the 3.6V systems).Full replacement: Replaces the HBC original numbers BA209000, BA209060 and BA209061 as well as the designation FuB 9AA.Modern NiMH upgrade: Also replaces older NiCd batteries (BA229000 / FuB 9A). The advantage: You can recharge the battery at any time, it lasts longer and is more environmentally friendly (cadmium-free).Solid capacity: Depending on the installed cells, this battery usually delivers between 730 mAh and 1,500 mAh. As it is often used in handsets without large displays, this is sufficient for very long operating times.Compatible with chargers: Works with the original HBC chargers (e.g. QE10860, QA10860), provided these are designed for 6V.Compatible transmitter series (extract)This battery fits certain versions of the following transmitters (please check voltage and design!):Micron series: micron 4, micron 5 (6V versions)Eco series: eco (6V versions)Linus series: linus 4Technos series: technos 1 (old versions)Others: patrol (handset variants) Characteristics ModelReplacement battery for HBC Radiomatic (Type FuB 9AA / FuB 9NM) Replaces original no.**BA209000**, **BA209060**, **BA209061**, **BA209062**, FuB 9NM Chemistry**NiMH** (nickel-metal hydride) Voltage**6.0 V** (5 small cells in a block) Capacity**700 mAh to 800 mAh** (standard for this size) Compatible transmitters (extract)**micron 4**, **micron 5**, **micron 6**, **micron 7**, eco, linus 4, linus 6 Form factorCompact, almost square block (approx. 57 x 56 mm) Contacts2 contacts on the top Dimensions (L x W x H in mm)approx. 57 x 56 x 17 (Attention: Much smaller than FuB 10AA!) Weight (g)approx. 90 - 120 (very light)  FAQs about the HBC BA209060 / FuB 9AAHow can I see the difference to the BA205030 (FuB 05AA)?This is visually difficult, as the housings are almost identical.BA205... (FuB 05AA): Has 3.6 volts.BA209... (FuB 9AA): Has 6.0 volts (this battery). You must check the rating label on your old battery ("6V"). If you insert a 6V battery in a 3.6V device, the electronics could burn out!My old battery was NiCd (BA229000). Is this NiMH compatible?Yes. HBC has switched from NiCd to NiMH batteries. The voltage (6V) has remained the same. Your charger should charge the new battery without any problems, and you benefit from a longer lifetime.Why does this battery sometimes have less mAh than the large blocks?This is due to the form factor. Large sub-C cells do not fit into the compact housing of the FuB 9AA. Smaller cells (AA or similar) are usually installed. As the devices in which it is installed (e.g. eco or linus) are very efficient, the battery still easily lasts a full working day.

Crane battery suitable for HTC Mini, 68300600, 68300900 NiMH 3,6V 1500mAh

Spare battery for

This powerful NiMH battery is the suitable replacement for the "long" version of the Hetronic batteries, which are often used in the larger vendor's tray transmitters (Nova-L, Nova-XL). In your enquiry you mentioned "HTC" - this is certainly the manufacturer Hetronic meant.This battery replaces the original number 68303000 (as well as the older 68301000). In contrast to the "short" version (Mini), this battery utilises the full space in the battery compartment and offers with 2,000 mAh (2.0 Ah) enormous capacity for long work shifts in crane, concrete pump or forestry operations.Highlights at a glanceLong design (Nova L): This is the elongated bar (approx. 15 cm long). It is specially designed for transmitters that have the deep battery compartment. It provides more than twice as much energy as the small "Mini" battery.Replaces Hetronic 68303000: Fully compatible with the original numbers 68303000 (NiMH standard), 68301000 (NiCd old) and 68301020.High capacity (2.0 Ah): With 2,000 mAh, this is the high-performance version. This allows you to easily operate demanding radio systems with many functions over long periods without having to recharge.Modern NiMH technology: Easily replaces old NiCd batteries. The advantage: No memory effect, higher energy density, and more environmentally friendly.Robust design: The black plastic housing is shock-resistant and designed for tough construction site use. The contacts on the front ensure a secure connection in the transmitter.Compatible transmitter seriesThis battery fits into the large Hetronic systems:Nova-L: The standard "long" Nova.Nova-XL: The extra large version.GL / GR: Older large transmitter series.Not suitable for: Nova-S, Nova-M or Hetronic Mini (these require the short 750 mAh battery!). Features ModelReplacement battery for Hetronic Nova "Long" / Maxi Replaces original no.**68303000** (NiMH), **68301000** (NiCd), 68301010, KH68300990, Maxi Chemical**NiMH** (nickel-metal hydride) Voltage9.6 V Capacity**2000 mAh (2.0 Ah)** - High capacity version for long shifts Compatible transmitters (extract)Hetronic **Nova-L**, **Nova-XL**, GL, GR, Euro series (large compartments) DesignElongated block (black or yellow), end cap with contacts Dimensions (L x W x H in mm)**Approx. 152 x 49 x 14** (Attention: Much longer than the "Mini" version!) Contacts4 contacts on the front (end cap) Weight (g)approx. 220 - 250 (more cells = more weight)  FAQs about the Hetronic Nova Long (68303000)What is the difference between "Short" and "Long"?This is the most important difference with Hetronic batteries:Short (Mini): Approx. 6 cm long, 750 mAh (for Mini/Nova-S).Long (this battery): Approx. 15 cm long, 2000 mAh (for Nova-L/XL). Please check your old battery. This item here is the long bar.Can I use this battery instead of the old NiCd battery (68301000)?Yes. Hetronic and third-party manufacturers have almost completely switched to NiMH. The voltage (9.6V) is identical. Your transmitter benefits from almost double the runtime (2.0 Ah vs. previously often 1.2 Ah).Does it fit in the yellow Hetronic charger?Yes. The standard chargers from Hetronic (UCH series) are designed so that the battery either fits in completely or (depending on the charging tray) protrudes at the top, but makes secure contact. Since it is NiMH, the battery is charged correctly.

Crane battery f

This NiMH battery is the reliable power source for the tried and tested radio remote controls from HIAB and Olsbergs. It is specially designed for the older, but widely used control systems HiDrive 4000 and CombiDrive 5000 designed.Often also known under the manufacturer's name Olsbergs, this battery replaces the original parts with the numbers 2055112, 9836713 or the type DA123. With 7.2 Volt and a capacity of mostly 1,500 mAh to 2,000 mAh (depending on the version), it brings your loader crane control back to full power – ideal as a replacement for ageing original batteries.Highlights at a glanceDouble identity (HIAB & Olsbergs): These controllers were often manufactured by Olsbergs for HIAB. The battery is therefore suitable for devices with HIAB-logo as well as those with Olsbergs-label.Full replacement: Fully replaces the original numbers 2055112, 9836713, 984.766.9 as well as the Olsbergs type designation DA123.Modern NiMH technology: Unlike old NiCd batteries, these cells do not suffer from the memory effect. You can recharge the battery flexibly without risking a loss in capacity.Robust housing: The battery is installed in an impact-resistant, black plastic housing, which is specially designed for the tough use on trucks and construction sites.Charging compatibility: Fits mechanically and electrically into the original charging stations of the HiDrive/CombiDrive systems.Compatible systemsThis battery is the heart of the following remote controls:HIAB: HiDrive 4000, CombiDrive 5000Olsbergs: Controller DA123, various OEM systems for loader cranes and forestry machines.Loglift / Jonsered: (If the Olsbergs control system is installed). Characteristics ModelReplacement battery for HIAB / Olsbergs (7.2V) Replaces original no.**2055112**, **804572**, **984.766.9**, D6000, DA143 Chemistry**NiMH** (nickel-metal hydride) Voltage**7.2 V** (6 cells) CapacityTypically **1500 mAh to 2000 mAh** (Stable upgrade) Compatible systemsHIAB **HiDrive 4000**, **CombiDrive 5000**, Olsbergs control DesignBlack, elongated block with lateral guide rails Dimensions (L x W x H in mm)approx. 120 x 55 x 23 Contacting4 recessed contacts on the front side Weight (g)approx. 200 - 220  FAQs about the HIAB / Olsbergs batteryMy battery only says "Olsbergs". Will this HIAB battery fit?Yes. HIAB uses the electronics of the Swedish hydraulics specialist Olsbergs for these systems. The batteries are technically identical, whether the HIAB logo or the Olsbergs brand name is on them. What matters is the design and the voltage of 7.2V.Does the battery also fit the newer HIAB XS Drive?No, mostly not. The XS Drive (often with 7.4V Li-Ion or other NiMH design) usually has a different battery compartment. The HiDrive 4000 batteries are rather flat and wide. Please compare the part number: If you are looking for 2055112, this is the right one.My original battery had less capacity. Is that a problem?No, that's an advantage. Old original batteries often only had 1,200 mAh. A new 2,000 mAh battery, at the same size, has more “endurance”. It lasts longer before you need to change it. The charger just takes a bit longer to fully charge it.

Spare battery for

This high-quality NiMH battery is the right power source for the widely used Hiab XS Drive Radio remote controls (often also used with Moffett or Multilift). It replaces the original battery with the part number 378.6692 (often written as 378 6692) and the reference number 16262.Although you wrote "XD Drive" in your enquiry, the part numbers clearly refer to the XS Drive System to. With 2,000 mAh (2.0 Ah), this battery offers a significant increase in performance compared to the older standard batteries (often 1.2 Ah or 1.5 Ah), which means longer charging cycles and fewer interruptions in crane operation.Highlights at a glancePerfect fit for XS Drive: Specially developed for the Hiab XS Drive Transmitter. The battery has the specific housing shape with the side guide rails and the contact block on the front.Replaces Hiab 378.6692: Fully compatible with the original part numbers 378.6692, 378 6692 and the number 16262. Also often replaces batteries from Cargotec or Moffettthat use this control system.High capacity (2.0 Ah): With 2,000 mAh utilise the maximum useful capacity for this design. Your transmitter will last significantly longer than with a used original battery.Reliable NiMH technology: No memory effect. The battery is more robust against deep discharge than Li-Ion variants and can be safely charged with standard NiMH chargers.Gold-plated contacts: High-quality contacts ensure loss-free power transmission and prevent corrosion, which is particularly important in damp weather on the loading crane.Compatible systemsThis battery fits the following control units (please compare part number and appearance):HIAB: XS Drive, XS Drive LiteMoffett: Truck-mounted forklift controls (XS Drive base)Multilift: Roll-off tipper controls (XS Drive base)Squid: Various terminal tractors (if XS Drive is installed) Characteristics ModelReplacement battery for HIAB XS Drive Replaces original no.**378.6692**, **379.6692**, 16262, AX-HI6692, AMH0627 Chemical**NiMH** (nickel-metal hydride) Voltage**7.2 V** (6 cells) Battery capacityTypically **2000 mAh** (standard) to **2300 mAh** (high power) Compatible transmittersHIAB **XS Drive** (modern series) DesignFlat, wide block (approx. 120 x 50 mm) Dimensions (L x W x H in mm)approx. 120 x 50 x 22 (significantly flatter than the CombiDrive battery!) Charging informationRequires special XS-Drive charger (battery is inserted flat) Weight (g)approx. 200 - 210 FAQs about the Hiab XS Drive battery (3786692)Can I use this NiMH battery if my old one was Li-Ion?Caution advised.Li-Ion batteries are also available for the XS Drive (often grey/black with a different number). These require a Li-Ion charger. If your charger and your old battery are NiMH (nickel-metal hydride), this article is perfect. If you have a pure Li-Ion charger, this battery will not fit electrically or will not charge. Check the charger's rating plate!What does the number 16262 mean?This is a common reference number.The number 16262 is often used by replica manufacturers or in cross-reference lists to identify this specific battery type (7.2V Hiab XS). Technically, it corresponds to Hiab number 378.6692.How long does the 2000 mAh battery last?Depending on use.The XS Drive transmitter is relatively economical. With 2,000 mAh, normal crane operation is often several working days possible without recharging. In continuous operation (e.g. 8 hours of uninterrupted transmission), it easily lasts for one to two shifts.

Crane battery suitable for Palfinger/Scanreco 590, 592, 960

.The PAL590.1500 crane battery is a robust NiMH replacement battery for Palfinger/Scanreco transmitters from the 590, 592 and 960 series and provides a long-lasting power supply for reliable radio control in everyday work. .

Spare battery for

This high-quality NiMH battery is the proven power source for the widely used Scanreco radio remote controls, which are especially used with Palfinger, Fassi, HMF and Effer loader cranes.It replaces the classic original batteries with designations 590 and 592 as well as the part numbers 13445, 16131 and 17162. With 7.2 volts and a capacity of mostly 1,500 mAh to 2,000 mAh (depending on cell equipment) this battery restores your remote control to full performance and often replaces old, weak NiCd batteries.Highlights at a glanceThe standard for loader cranes: This battery (often called "Scanreco block") is one of the most frequently used batteries worldwide. It fits into transmitters of the RC400, RC590 and RC960 series.Powerful upgrade (2.0 Ah): While old original batteries often only delivered 1,200 mAh, modern replicas offer 2,000 mAh. This means for you: Longer crane operating times and fewer interruptions for changing batteries.Full compatibility: Replaces the original numbers 590, 592, 13445, 16131, 17162, 1026 and also EA2512 and RSC7220.Modern NiMH technology: No more memory effect. The battery is more robust and environmentally friendly than old NiCd models. It provides a constant voltage until the end.Robust construction: Made from impact-resistant plastic (black) to withstand tough conditions on the lorry or construction site.Compatible systems (excerpt)This battery is manufactured by Scanreco, but sold under many crane brand names. It fits in:Palfinger: Scanreco RC400, RC590, RC960, EEA2512Fassi: (Scanreco systems)HMF: (Scanreco systems)Effer: (Scanreco systems)Marrel: (Scanreco systems)Crane radio: Suitable for all systems using battery type 590/592. Features ModelReplacement battery for Scanreco / Palfinger ("The Bone") Replaces original number**590**, **592**, **960**, 16131, EEA2512, 593, RSC7220 Chemistry**NiMH** (Nickel-Metal Hydride) Voltage**7.2 V** (6 cells in rod) Capacity**2000 mAh** to **3000 mAh** (Depending on version, standard is 2000 mAh) Application areaTruck loader cranes (**Palfinger**, **Fassi**, **Effer**, **HMF**, **Kranlim**) SystemsScanreco RC400, RC590, RC960, Y-HET, Maxi Form factorElongated rod with thickened ends ("dog bone") Dimensions (L x W x H in mm)approx. 150 x 50 x 28 Charging noteCompatible with the standard Scanreco charger (Type 434 / 435 / 439) Weight (g)approx. 340 - 380  FAQs on the Palfinger / Scanreco 590 batteryMy old battery has 3 contacts, this one only 2. Will it fit?Usually, yes. Scanreco batteries generally have 2 main contacts (+ and -) on the face. Some older versions or special designs had a third contact for temperature monitoring. The modern NiMH replacement batteries work flawlessly in the standard chargers (Type 434 / 435) and transmitters even with 2 contacts, as the charging cut-off is via delta peak (voltage).Can I continue to use my Palfinger charger?Yes. The standard charger in the lorry or the mains charger (often known as 434, 435 or 439) charges this battery without issues. As the new battery has more capacity (2.0 Ah), charging takes a little longer than before, but it also lasts longer.What is the difference between type 590 and 592?Historically, there were differences in cell chemistry (NiCd vs NiMH) or capacity. Today, this form factor (Scanreco block) is the universal replacement for both numbers. This battery replaces both types.

Spare battery for

This NiMH high-performance battery is the specialised power source for the radio remote controls of Schwing concrete pumps. It is precisely matched to the AK2 system (often produced by Teletec) and replaces the original batteries with part numbers 10191556 and 491001057.With 7.2 Volt and a capacity of 2,000 mAh (or higher, depending on the version), this battery offers reliable endurance for tough construction site use. It is the ideal solution if your old battery no longer holds a charge or you need a second battery for uninterrupted operation of the concrete pump.Highlights at a glanceSpecialist for concrete pumps: Specially developed for the Schwing radio remote controls of the AK2 series and compatible Teletec transmitters.Full replacement for 10191556: Identically replaces the original Schwing numbers 10191556, 491001057 as well as the Teletec number RTE7220.Powerful upgrade (2.0 Ah): With 2,000 mAh, this battery often offers more capacity than the original standard batteries. This means longer pumping times without battery replacement.Modern NiMH technology: Uses robust nickel-metal hydride cells with no memory effect. You can recharge the battery at any time, which is a great advantage in hectic construction site use.Precisely fitting housing: The battery (mostly black) features the specific design with the correct contacts to securely lock into the slot of the transmitter.Compatible modelsThis battery fits the following control systems:Schwing: Concrete pump AK2, transmitter AK2Teletec: AK2 Transmitter, FW24, FW43Other: Devices that use the battery type CS-TAK200BL or RTE7220 use. Characteristics ModelReplacement battery for Schwing / Teletec (AK2) Replaces original no.**10191556**, **30423555**, 10071306, 31000070 Chemistry**NiMH** (nickel-metal hydride) Voltage**7.2 V** Capacity**2000 mAh (2.0 Ah)** - Solid performance for everyday construction site use Suitable forSchwing Stetter concrete pumps, Teletec radio remote controls DesignRectangular block (grey or black) with guide rails Dimensions (L x W x H in mm)approx. 108 x 50 x 26 Charging informationCompatible with original Schwing/Teletec chargers Weight (g)approx. 210 - 230  FAQs on Schwing AK2 batteryMy old battery has a different colour. Will this black battery fit?Yes, in most cases.The original batteries sometimes vary in colour or branding (Schwing vs. Teletec). The decisive factors are the design and the part number (e.g. 10191556). If your old battery looks mechanically identical and has 7.2V, this replacement battery will fit.Do I need a special charger?No.The battery is designed to be charged with the original Schwing or Teletec charging stations. The charging electronics detect the NiMH battery and charge it reliably.Is this battery also available with Li-Ion technology?Caution.There are conversions or newer versions, but the standard AK2 systems are designed for NiMH (formerly NiCd). A Li-Ion battery necessarily requires a different charger. Stick to NiMH if your charger and transmitter are designed for it, to avoid damage.

Spare battery for

This is the high-end version of the classic HBC supply block. With 2,100 mAh (2.1 Ah) this NiMH battery offers the technically maximum possible capacity for this design. It is the direct upgrade to the standard battery (FuB 10AA with 1500–2000 mAh) and is particularly suitable for users who work in multi-shift operation or whose radio remote controls (e.g. Spectrum series) have a high power consumption due to many additional functions (displays, feedback).It reliably replaces all variants of the type FuB 10, FuB 78 as well as the original BA21 numbers. The specification "2x6V" refers to the special contact configuration (4 contacts), the operating voltage is 6 volt.Highlights at a glanceMaximum endurance (2.1 Ah): With 2,100 mAh you get the longest possible runtime for this battery type. This means fewer charging cycles and more security for long operations on the construction site or in the forestry sector.Complete replacement: Replaces the HBC original numbers BA214060, BA214061, BA213020, BA211060 and BA210040. Compatible with the designations FuB 10AA, FuB 10XL, FuB 78AA as well as PM458017 and PM471560.Modern NiMH technology: No memory effect. You can recharge the battery at any time without fear of loss of capacity. It is also more robust to cold than old NiCd batteries.4-contact system: The battery has the characteristic 4 contacts on the base, which provide intelligent charging detection and redundant power supply in HBC large transmitters.Precision-fit housing: The battery block (usually black or HBC orange) is mechanically precisely matched to the shafts of the Spectrum and Patrol transmitters.Compatible transmitter series (excerpt)This "large" battery is the standard for HBC's tray transmitters:Spectrum series: Spectrum 1, Spectrum 2, Spectrum 3Patrol series: Patrol DVector series: Vector ProSpecial applications: Forestry radios, concrete pumps, cranes using the large BA21 tray. Characteristics ModelSpare battery for HBC Radiomatic (type FuB 10XL) Replaces original no.**FuB 10XL**, **FuB 10AA**, BA214060, BA214061, BA213020 Chemistry**NiMH** (Nickel-metal hydride) - High Energy Cells Voltage**6.0 V** Capacity**2100 mAh (2.1 Ah)** - The maximum for this housing Compatible transmitters (excerpt)spectrum 1, spectrum 2, spectrum 3, patrol D, technos, vector pro ConstructionOrange block (shockproof, vibration-protected) XL advantageApprox. **40% longer runtime** than old NiCd or standard NiMH batteries Charging noteCompatible with all NiMH-compatible HBC chargers (charging time is slightly increased) Weight (g)approx. 230 - 250 (densely packed energy cells)  FAQs for the HBC FuB 10XL (2.1 Ah)What are the benefits of switching from 1.5 Ah to 2.1 Ah?Approx. 40% longer runtime. If your old battery was empty after 8 hours, this one will last over 11 hours in theory. This is often the crucial difference to finish a long shift without changing.What does "2x6V" mean exactly?The battery internally has two strings or a special contact configuration with 4 poles to support the HBC safety features. Technically, it provides 6 volt to the transmitter. Do not be confused by the designation – as long as your old battery has 4 contacts and bears the BA21... number, this one will fit perfectly.Does charging take longer?Yes, slightly. As there is more energy "in the tank" (2100 mAh), the charger takes a little longer to fill it completely (compared with a 1500 mAh battery). The original HBC chargers, however, regulate this automatically and switch off as soon as the battery is full.

Spare battery for

This NiMH battery is the modern replacement for the compact 3.6 Volt battery packs from HBC Radiomatic. It replaces both the older NiCd versions (often known as BA225030 or FuB 05A) as well as the NiMH standard batteries (BA205000 / BA205030 / FuB 05AA).With a capacity of nowadays mostly 2,000 mAh to 2,100 mAh (compared to the old 700–1500 mAh), this battery offers a tremendous increase in run time for your crane remote. It is primarily used in the more compact HBC handsets of the micron, linus and eco series.Highlights at a glanceMore stamina: Thanks to high-quality NiMH cells (mostly AA size inside), this battery offers significantly more capacity than the old originals. Your handset will easily last long working shifts.Full compatibility (3.6V): Identical replacement for HBC original numbers BA205000, BA205030, BA225030 as well as the designations FuB 05AA (NiMH) and FuB 05A (NiCd).Environmentally friendly technology: No more toxic cadmium. The NiMH battery has no memory effect and can be recharged flexibly at any time.HBC fit: Features the typical orange (or black) housing with the two base contacts and snaps securely into the battery compartment.Charging compatibility: Works perfectly with the original HBC chargers (e.g. QE10860, QA10860), provided these are designed for 3.6V or have automatic voltage detection.Compatible transmitter series (excerpt)This 3.6V battery fits into many handsets that do not require the large 6V block:Micron series: micron 4, micron 5, micron 6, micron 7 (please check voltage, some use 6V!)Eco series: ecoLinus series: linus 4, linus 6Spectrum series: spectrum A (some versions), spectrum 1 (with 3.6V conversion)Technos series: technos 1, technos 2 (with 3.6V version)Vector series: vector pro Features ModelReplacement battery for HBC Radiomatic 3.6V Replaces original no.**BA225030**, **BA205030**, BA205000, BA225000, FuB 05 AA, FuB 05 XL Chemistry**NiMH** (Nickel-metal hydride) Voltage**3.6 V** (Be sure to check!) CapacityTypically **1500 mAh to 2100 mAh** (Longer runtime than old NiCd) Compatible transmitters (excerpt)**micron 4**, **micron 5**, **micron 6**, **micron 7**, eco, linus 6, quadrix DesignOrange block (identical size as 6V, but lighter) Charging noteIntelligent HBC chargers (e.g. QD109300) often detect the voltage automatically Contact type2 flat contacts on top Weight (g)approx. 160 - 180 (Noticeably lighter than the 6V battery) FAQs for HBC BA205030 / FuB 05AAAttention: 3.6 Volt or 6 Volt?This is the most important distinction at HBC!This battery (BA205030) has 3.6 Volt (3 cells).The larger sibling (BA203060) has 6.0 Volt (5 cells). They look almost the same visually, but the 6V battery is somewhat thicker/heavier. Always check the type plate of your old battery or the battery compartment. A 6V battery often does not fit mechanically in a 3.6V bay and vice versa.My old battery only has 700 mAh. Can I use the 2000 mAh battery?Yes, that is a huge advantage. The old NiCd batteries had less capacity due to technical reasons. The new NiMH battery lasts almost three times as long at the same voltage (3.6V).What do the colours of the batteries mean (Orange vs. Black)?In the past, orange was often for standard batteries and black for ex-protected areas (ATEX) or newer NiMH series. In replacement batteries, the colour is usually orange (standard) or black, but often has no technical relevance regarding explosion protection. Important: If you work in explosion-protected areas (ATEX), you may use only certified original batteries with corresponding ex-marking, not standard replicas!

Spare battery for

This is the most powerful expansion stage for the 3.6 volt Hetronic system. With a nominal capacity of 2,500 mAh (2.5 Ah), this battery pushes the technical maximum of modern nickel-metal hydride technology in this form factor.It replaces the original batteries 68300900 (standard NiMH) and 68300600 (old NiCd) and compared to these (often only 1200 or 1500 mAh), offers a maximum extension of runtime. This battery is the first choice for intensive, continuous use in multi-shift operations, as it lasts an extremely long time before it needs to be put back on the charger.Highlights at a glanceMaximum capacity (2.5 Ah): With 2,500 mAh, this battery offers the highest possible energy density for this type. That means for you: fewer charging cycles, fewer work interruptions and maximum availability of your radio remote control.Specialist for 3.6V: Designed for Hetronic systems with 3 cells (3.6 volts). It fits perfectly in the Ergo Series and the rarer 3.6V version of the Mini transmitter.100% compatible replacement: Replaces identically Hetronic part numbers 68300900, 68300600, 68300800 and 68300850.State-of-the-art NiMH cells: Uses high-current-quality cells without memory effect. They also replace old, environmentally harmful NiCd batteries (68300600) easily and in an environmentally friendly way.Robust housing: The battery is installed in a precisely fitting plastic housing (mostly black), which protects the cells from impacts and moisture.Compatible models (extract)Important: Please always check whether your device needs 3.6 volt!Hetronic Ergo: Ergo, Ergo-F, Ergo-M (transmitter in "banana shape" – here 3.6V is standard).Hetronic Mini: Attention! Only suitable for Mini transmitters designed for 3.6V. (Most mini transmitters use 9.6V and require a different, thicker battery!).Hetronic Nova-S: (3.6V versions only). Characteristics ModelReplacement battery for Hetronic 3.6V (Ultra-High-Power) Replaces original no.**68300800**, 68300850, 68100800, HE900, HT-01 Chemistry**NiMH** (Nickel-metal hydride) - High energy density Voltage**3.6 V** (3 high-performance cells) Capacity**2500 mAh (2.5 Ah)** - The absolute maximum for this form factor Compatible transmitters (extract)Hetronic **ERGO** (Ergo-F), **MINI-HET**, **POCKET**, **Nova-S** (3.6V only!) Form factorCompact black block (approx. 60 x 54 x 22 mm) Charging timeIncreases slightly compared to standard batteries (as more energy is being charged) FeatureIdeal for continuous use in forestry or construction without charging option Weight (g)approx. 110 - 130 (highest cell density)  FAQs about the Hetronic 3.6V 2500mAh batteryCan my charger handle the high capacity of 2500 mAh?Yes.Your Hetronic charger charges the battery fully. However, since the "tank" is very large (2.5 Ah), charging takes longer than with the old original battery (e.g. 1.2 Ah). Expect double the charging time, but the battery will last twice as long in operation.Why doesn’t the battery fit in my Hetronic Mini?You probably have the 9.6V version.This is the most common mistake: most Hetronic Mini transmitters use a 9.6V battery (part number 68300520). This is square and thicker. The 3.6V battery (68300900) offered here is flatter. Please check the number on your old battery. If it says 683005... you need 9.6V. If it says 683009... or 6... then this one is correct for you.What are the benefits of upgrading from NiCd (68300600) to NiMH?More performance and environmental protection.The old NiCd batteries had the "memory effect" (capacity loss with partial discharge) and contained toxic cadmium. This NiMH battery is robust, can be recharged at any time, and delivers more stable voltage for the electronics.

Spare battery for

This NiMH battery is the compact power source for the smaller transmitters of the Hetronic family. It has been specifically designed as a replacement for the "short" design (often referred to as "mini battery").In contrast to the large Nova-L batteries, which have a long design, this battery is almost square. It replaces the original batteries with the part numbers 68300510 and 68300520. With 9.6 Volt and 750 mAh it delivers exactly the power required for the compact transmitter controls.Highlights at a glanceSpecific "short" design: This battery is designed for the compact battery shafts (approx. dimensions 60 x 50 x 14 mm). It does not fit holders that require the long Nova-L battery, but is the standard replacement part for the "Mini" series.100% replacement for 68300xxx: Replaces the Hetronic original numbers 68300510, 68300520 as well as often 68300500 (if it is the NiMH version).Modern NiMH technology: No memory effect. Unlike old NiCd cells, this battery can be recharged as needed. It is more environmentally friendly and provides stable voltage for the transmitter electronics.Suitable for Hetronic Mini: This is the standard battery for the popular Hetronic Mini vendor tray transmitters and the Nova-S (Short) series.Black housing: The battery comes in the typical black plastic housing with 4 contacts on the front side, matching the original design.Compatible transmitter seriesThis battery is (mechanically) suitable for the following devices:Hetronic Mini: The classic small vendor tray transmitter.Hetronic Nova-S: The short version of the Nova handheld transmitters.Hetronic Nova-M: (Please check battery compartment, some use the long battery).Attention: It does not fit Nova-L or Nova-XL, if these must fully fill the long slot or require a higher capacity (2000 mAh)! Characteristics ModelReplacement battery for Hetronic Nova "Short" / Mini Replaces original no.**68300520**, **68300600**, 68300900, Mini 68300900 Chemistry**NiMH** (nickel-metal hydride) - upgrade to old NiCd Voltage9.6 V Capacity**750 mAh (0.75 Ah)** - Standard for the short design Compatible transmitters (excerpt)Hetronic Nova-S, Nova-M, GL, GK (Please check battery compartment!) DesignRectangular block, black (rarely yellow in replicas) Dimensions (L x W x H in mm)**approx. 114 x 49 x 14** (The length is decisive!) Charging noticeCompatible with Hetronic chargers for 9.6V systems Weight (g)approx. 150 - 170 FAQs for the Hetronic Nova Short (68300520)How do I know if I need the "short" or "long" battery?This is the most important point with Hetronic!Short (this battery): Is almost square (approx. 6 cm long). Capacity mostly 750 mAh.Long (Nova-L): Is elongated rectangular (approx. 12 cm long, looks like two short ones together). Capacity mostly 1500–2000 mAh. Measure your old battery. If it is only approx. 6 cm long, you need this one.Is 750 mAh not too little?Not for the "Mini" transmitters. Since the Hetronic Mini transmitters usually don't have large colour displays or power-hungry additional functions, the 750 mAh capacity is perfectly sufficient for a normal working day. The small housing does not physically allow cells with 2000 mAh at 9.6V.Will it fit in my Hetronic charger?Yes. The yellow or black Hetronic chargers usually have a slot which can accommodate both short and long batteries (the long one protrudes further, the short one disappears further inside, or the slot is universal). The charging contacts are identically positioned.

Spare battery for

This NiMH battery is the precise replacement for the power supply of the compact Ikusi hand-held transmitters, especially the T70/1 and T70/2 (TM70 system). It replaces the original battery BT06K.With a voltage of 4.8 volts and a capacity of 1,000 mAh (1.0 Ah), this battery provides reliable power for your crane or machine control.IMPORTANT SAFETY INSTRUCTION REGARDING ATEX: You mentioned "ATEX/HALL" in your enquiry. Please note: This battery fits into the devices mechanically and electrically. However, if you work in hazardous areas (Ex zones), you are often only permitted for insurance and safety reasons to use only certified original batteries from the manufacturer that are explicitly approved for the corresponding Ex zone. Standard replacement batteries usually have no ATEX approval.Highlights at a GlanceSuitable for Ikusi T70: Specially developed for the "small" hand-held transmitters of the TM70 family (T70/1, T70/2) and also compatible with transmitters that use the BT06K battery.Replaces BT06K: Fully compatible with Ikusi part number BT06K (sometimes also BT06K-Atex mechanically suitable, see warning above).Solid capacity (1.0 Ah): With 1,000 mAh, the battery has enough reserves for long working shifts. As the T70 transmitters are very energy-efficient, a single charge often lasts for several days.NiMH technology: Uses nickel-metal hydride cells. These are more environmentally friendly than old NiCd batteries and have no memory effect.Compact design: Small black block that fits securely into the battery compartment of the hand-held transmitter.Compatible ModelsThis battery fits the following Ikusi remote controls:Ikusi T70/1Ikusi T70/2Ikusi TM70 (hand-held transmitter variants)Ikusi iK2 (please check the battery compartment, some use Li-Ion!) Characteristics ModelReplacement battery for Ikusi T70 (hand-held transmitter) Replaces original no.**BT06K**, **BT06**, 2303692, 2303690 Chemistry**NiMH** (Nickel-metal hydride) Voltage**4.8 V** (4 cells) Capacity**1000 mAh** (Standard) up to 1200 mAh (High Power) Compatible transmittersIkusi **T70/1**, **T70/2**, **T70/1 ATEX**, **T70/2 ATEX** (hand-held transmitter) TypeSmall black cassette battery (ribbed back) Dimensions (L x W x H in mm)approx. 70 x 48 x 16 (Very compact) Charging noteRequires Ikusi charger **BC70** or **BC70K** Contacts2 metal contacts on the back Weight (g)approx. 90 - 110  FAQs about the Ikusi BT06K batteryCan I continue to use my old charger (BC70 / CB70)?Yes. The battery is fully compatible with the original Ikusi chargers (e.g. BC70). The charging electronics detects the battery and charges it correctly.What does "BT06K" mean?That is the type designation from Ikusi.BT = Battery06 = SeriesK = Often indicates the NiMH version (in contrast to the very old NiCd variants like BT06).My old battery has 600 mAh. Is 1000 mAh better?Yes. The standard capacity has increased over the years due to better cell technology. 1,000 mAh means almost double the runtime compared to old 600 mAh batteries. You need to charge less often.

Spare battery for

This is the most powerful expansion stage for your Scanreco and Palfinger radio remote controls. While standard batteries usually only offer 1,500 or 2,000 mAh, this high-end battery delivers a whopping 3,000 mAh (3.0 Ah).It replaces the classic types 590 and 592 (as well as 13445, 16131) and is the ideal solution for intensive continuous use. With this "marathon battery" you can handle even the longest work shifts or multi-day jobs without having to constantly run to the charger.Highlights at a glanceMaximum capacity (3.0 Ah): With 3,000 mAh, this battery offers up to 100% more runtime compared to old original batteries (often 1.5 Ah). It is the maximum that can technically fit into this housing.Full compatibility: Replaces identically the Scanreco/Palfinger original numbers 590, 592, 13445, 16131, 17162 as well as EA2512 and RSC7220.State-of-the-art NiMH cells: No memory effect. The high-current cells used are specially selected for long-lasting, stable voltage output and can also replace old NiCd batteries in an environmentally friendly way.Identical design: Despite the enormous increase in performance, the battery has exactly the same external dimensions as the original and fits snugly into the transmitter and charger.Robust housing: The black, impact-resistant plastic housing is designed for tough construction site work with loader cranes, concrete pumps and forestry machines.Compatible systems (extract)This battery fits all systems that use the classic "Scanreco block":Palfinger: Scanreco RC400, RC590, RC960, Y-HMFScanreco: RC 400 series transmitters / G2B systemFassi: (Scanreco RC400)HMF: (Scanreco RC400)Effer: (Scanreco RC400)Marrel: (Scanreco RC400) Characteristics ModelReplacement battery for Scanreco / Palfinger (Ultra-High-Power) Replaces original no.**590**, **592**, **960**, 16131, EEA2512, RSC7220, 593 Chemistry**NiMH** (Nickel-metal hydride) - High Energy Cells Voltage**7.2 V** Capacity**3000 mAh (3.0 Ah)** - The maximum for this format Suitable for cranesPalfinger, Effer, Fassi, HMF, Kranlim (RC400 / RC590 / RC960) Design"Bone" shape (identical dimensions as standard, fits in every compartment) Contacting2 lateral contact strips (self-cleaning when inserted) Special featureIdeal for transmitters with colour display or high power consumption Weight (g)approx. 380 - 410 (noticeably heavier due to high cell density) FAQs about the Palfinger 3000mAh batteryWill the battery fit in my charger despite 3000 mAh?Yes.The external dimensions are standardised. However, as the "tank" is very large (3.0 Ah), your charger (type 434/435) will accordingly need longer to fully charge the battery (approx. double charging time compared to a 1.5 Ah battery). Plan this in or charge overnight.Is this battery heavier?Yes, minimal.Due to the higher density of the high-performance cells used, the 3000 mAh battery is slightly heavier than a standard 1500 mAh battery. However, the difference is hardly noticeable in everyday work and rather provides a high-quality feel.My old battery was red (NiCd). Can I use this black one (NiMH)?Yes.Palfinger/Scanreco has changed colours and technologies over the years. Whether your old battery was red or black is irrelevant. This modern NiMH battery is backwards compatible and reliably replaces the old technology.

Spare battery for

This is the special 3.6 volt NiMH battery for radio remote controls of the brand Hetronic (often abbreviated as HTC).Attention, important difference: While many Hetronic transmitters (such as Nova-L or Nova-S) run on 9.6 volts, certain series (such as Ergo or special Mini variants) require this 3.6 volt battery. It replaces the original numbers 68300600, 68300900 as well as 68300800. With a capacity of mostly 2,000 mAh (2.0 Ah), it offers significantly more power than the older standard batteries.Highlights at a glanceSpecific 3.6V voltage: This battery is not compatible with the 9.6V systems. It is designed for transmitters that operate at a lower voltage (e.g. hand-held transmitters from the Ergo series).High capacity (2.0 Ah): Modern NiMH cells enable a capacity of approx. 2000 mAh. This ensures very long operating times, often several days with normal use, as 3.6V transmitters usually consume less current.Replaces Hetronic 68300xxx: Fully compatible with part numbers 68300900 (standard NiMH), 68300600 and 68300800.Modern NiMH technology: No memory effect. You can charge the battery at any time. It is the environmentally friendly replacement for older NiCd versions.Compact design: The battery is usually black and rectangular, a little flatter than the 9.6 V blocks, and has specific contacts for the 3.6 V slot.Compatible transmitters (extract)This battery fits mechanically and electrically in the following Hetronic systems (please check the type plate!):Hetronic Ergo: Ergo, Ergo-F, Ergo-M (transmitter in "banana shape" or hand-held transmitter).Hetronic Mini (3.6V): Only for versions that explicitly use 3.6V (many Minis use 9.6V!).Hetronic Nova (3.6V): Special versions. Characteristics ModelReplacement battery for Hetronic 3.6V (type "Pocket") Replaces original no.**68300800**, 68300850, 68100800 (Attention: NOT 68300900!) Chemistry**NiMH** (nickel-metal hydride) Voltage**3.6 V** (3 cells) CapacityTypically **1200 mAh to 2200 mAh** (Depending on cell quality) Compatible transmitters (extract)Hetronic **MINI-HET**, **POCKET**, **ERGO**, **GR** (3.6V versions) DesignSmall black block, often with slightly rounded edges Difference to the 9.6V batterySignificantly smaller and lighter, only 3 cells instead of 8 cells ContactingUsually 4 contacts, but different layout from the 9.6V version Weight (g)approx. 80 - 110 (Very light)  FAQs about the Hetronic 3.6V battery (68300900)My "Mini" transmitter previously had a 9.6V battery (square). Does this one fit?No, absolutely not! This is the most common confusion with Hetronic.9.6V battery (68300520): Is square, thicker.3.6V battery (This item): Is often flatter or differently shaped. The part numbers 68300600 and 68300900 clearly indicate 3.6 volt. If you were to put this battery into a 9.6V device (if it fits mechanically), the device would not start (undervoltage).What does "HTC" mean?In the construction industry Hetronic is often mistakenly abbreviated as "HTC" or confused with the mobile phone manufacturer/HBC. The numbers 683... confirm beyond doubt that it is a Hetronic battery.Can I use my old charger?Yes. Hetronic chargers usually recognise the battery type. Make sure that the contacts are clean. Since this battery is NiMH, the charger should be NiMH-compatible (which almost all Hetronic chargers from the last 15 years are). 

Spare battery for

This NiMH battery is the suitable replacement for the original Autec MBM06MH battery pack (also known under part number R0BATT00E0014). It is the standard energy source for a wide variety of Autec radio remote controls, especially from the Modular, Dynamic and Air series. With a voltage of 7.2 Volt and a typical capacity of 750 mAh (standard), it ensures reliable operation of your crane or machine control.Highlights at a glance100% compatible: Replaces the original battery MBM06MH, identical design and fits mechanically perfectly into the battery compartment of the hand transmitters.Proven NiMH technology: Uses nickel-metal hydride cells. These are robust, safe and no longer have a memory effect (unlike very old NiCd batteries). You can recharge the battery at any time.Suitable for your charger: The battery can easily be charged with the original Autec charging stations (e.g. MBC825A, MBC930D or MBC12V) can be charged. You do not need any new accessories.Typical design: This is a flat, black block (approx. 77 x 53 x 15 mm) with the contacts on the front, which is inserted into the battery compartment.Compatible models (extract)This battery is the heart of many professional Autec remote controls:Modular series: MJ, MK, MJ04, MK PlusDynamic / Dynamic+ series: FJL, FJM, FJR, FJS, DJL, DJM, DJR, DJSAir series: AJS, AJR, AJMSpecial models: E16 KTC, E16 Sirio 42 Features ModelReplacement battery for Autec MBM06MH Replaces original no.MBM06MH, LPM02, LPM04 (older NiCd versions) ApplicationIndustrial radio remote controls (crane, concrete pump) Chemistry**NiMH** (nickel-metal hydride) Voltage7.2 V CapacityTypically **1500 mAh to 2000 mAh** (original NiCd often only had 700 mAh) Suitable for series**Modular series** (MJ, MK) & **Dynamic series** (FJM, FJR, FJL) DesignFlat, rectangular block (black) with contacts on the surface Charging informationCharger must be NiMH-compatible (mostly the case with Autec) SafetyHigh vibration resistance (important for construction site operation) Weight (g)approx. 180 - 200  FAQs about the Autec MBM06MHIs this battery available with greater capacity (e.g. 2000 mAh)?No, usually not in this size. The flat design limits the physical size of the cells inside. The standard capacity for these flat NiMH cells is technically about 700 to 800 mAh. Be sceptical of offers that promise unrealistically high values (such as 2000 mAh) for exactly this small battery type.My battery only has 2 contacts, is that correct?Yes. The MBM06MH usually has two main contacts (+) and (-) on the front for power transmission. Charging is often monitored via temperature or time control in the charger.What is the difference to the LBM02MH?Attention, risk of confusion! The LBM02MH looks similar, but only has 2.4 Volt (often for smaller transmitters). The MBM06MH has 7.2 Volt. The two are not electrically compatible. Be sure to check the nameplate on your old battery or in the battery compartment.

Special crane battery f

This NiMH special battery is the safety-relevant energy source for Ikusi radio remote controls, which are used in potentially explosive areas (Ex zones). It replaces the original battery BT06K and is specially designed for the requirements of the ATEX and HALL safety standards.In contrast to standard batteries, this version features intrinsic protection mechanisms that must prevent sparking or overheating under all circumstances in order to guarantee maximum safety in refineries, mining, or the chemical industry.Highlights at a glanceMaximum safety (ATEX/HALL): This battery is intended for use in safety areas. It meets the strict requirements for explosion protection (please observe certificates on the battery!).Suitable for Ikusi Ex transmitters: Specially adapted for the T70/1 and T70/2 handheld transmitters in the ATEX version (often recognisable by black housings with Ex marking or special type plates).Replaces BT06K (Ex): Compatible with part number BT06K in the explosion-protected version.NiMH technology (4.8V): Uses safe nickel-metal hydride cells with 4.8 volts. This chemistry is robust and durable.Certified design: The housing and the internal connectors are designed to prevent static build-up and short circuits inside.Important safety noticeRisk to life if the wrong choice is made! In potentially explosive areas (Zone 0, 1, 2 etc.) only batteries may be used that have a valid and zone-appropriate ATEX approval.Never use standard replacement batteries without Ex certificate in an ATEX area!Before each use, check that the Ex symbol on the battery is undamaged and legible.Operating an Ex transmitter with a non-Ex battery leads to the immediate loss of the operating licence for the entire system. Properties ModelCrane battery for Ikusi T70 handheld transmitter Replaces original no.**BT06K**, **BT06K-A**, 2303692 Chemistry**NiMH** (Nickel-metal hydride) Voltage**4.8 V** (4 cells) Capacity**1000 mAh** to **1200 mAh** (Significantly improved compared to old 600 mAh) Suitable for transmittersIkusi **T70/1**, **T70/2**, **TM70/1**, **TM70/2** (handheld transmitter design) DesignSmall cassette, black, contacts on the back Charging noteCompatible with Ikusi charger **BC70** (processor-controlled) SafetyRobust housing for heavy industrial use (drop-proof) Weight (g)approx. 90 - 100  FAQs about Ikusi ATEX batteryCan I also use this ATEX battery in a standard (non-Ex) transmitter?Yes. Technically, this works without any problems, as voltage and design are identical. However, it is usually not economical, as ATEX batteries are significantly more expensive due to the elaborate certification and construction than standard batteries.May I charge this battery in the normal charger (BC70)?Usually yes. Ikusi chargers (e.g. BC70) usually charge both versions. Note: The charger itself must usually not be located in the Ex zone! Always charge batteries outside the potentially explosive atmosphere in safe rooms.How do I recognise an ATEX battery?Look for the hexagon symbol with "Ex" and the specific zone markings (e.g. II 2G Ex ib IIC T4) on the battery’s type plate. If this symbol is missing, it is a standard battery and is prohibited for hazardous areas.

Spare battery for

This powerful NiMH battery is the replacement for the large supply blocks of the HBC Radiomatic large transmitters (e.g. Spectrum series). It is known under the designations FuB 10AA, FuB 10XL or FuB 78AA and replaces the original batteries of the BA21xxxx series.With a voltage of 6 volts and a capacity of 2,000 mAh (2.0 Ah), this battery provides reliable energy for long work shifts. The designation "2x6V" often refers to the internal cell arrangement or contact configuration (4 contacts), the voltage for operation is 6V.Highlights at a glanceWide compatibility (FuB 10 / FuB 78): This battery replaces the original types BA214060, BA214061, BA213020, BA211060 and BA210040. It is also compatible with the HBC designations FuB 10AA, FuB 10XL, FuB 78AA as well as the PM numbers PM458017 and PM471560.High capacity (2.0 Ah): As a FuB 10XL variant, it offers 2000 mAh. This is a noticeable upgrade compared to old NiCd batteries (FuB 10A) which often only had 1400 mAh.Modern NiMH technology: No more memory effect. The battery can be charged at any time and is more environmentally friendly than the old cadmium versions.Robust design: This is the large, black (or orange) block battery designed for rugged construction site use in the large tray transmitters.4-contact system: The battery typically has 4 contacts on the bottom (2 for charging, 2 for operation or redundant design), which often leads to the designation "2x6V".Compatible transmitter series (excerpt)This battery type is mainly used in the large "tray" controls:Spectrum series: Spectrum 1, Spectrum 2, Spectrum 3 (certain versions)Patrol series: patrol DVector series: vector proOther: various models for construction cranes, concrete pumps and forestry winches that use the large BA21 compartment. Characteristics ModelReplacement battery for HBC Radiomatic (type FuB 10AA) Replaces original no.**BA214060**, **BA214061**, **FuB 10AA**, FuB 10XL Chemistry**NiMH** (nickel-metal hydride) Voltage**6.0 V** (5 cells at 1.2V each) Capacity**2000 mAh (2.0 Ah)** - High Capacity Version Compatible transmitters (excerpt)spectrum 1, spectrum 2, spectrum A, spectrum B, patrol D, technos (6V versions) DesignOrange block (impact-resistant ABS plastic) Contacting2 nickel-plated contact areas on the top Charging noteCompatible with HBC chargers (e.g. QE108600, QA108600) Weight (g)approx. 220 - 240 (heavier than the 3.6V version)  FAQs for the HBC FuB 10AA / BA214060What is the difference to FuB 05AA or FuB 3A? The size.FuB 05AA: Small block (3.6V).FuB 3A (BA203060): Flatter 6V block (mostly orange).FuB 10AA (this battery): Thicker, large 6V block (usually black or orange) with 4 contacts. Please check the dimensions and BA number of your old battery.What does "2x6V" mean? This is a technical specification of the internal wiring or contact configuration (redundancy). For the user this means: It is a 6 volt battery. If your device needs 6V and has the large compartment, this is the right battery.Can I charge this battery with my old HBC charger? Yes. The original HBC charging cradles (for the FuB 10 type) charge both the old NiCd and the new NiMH versions. The charging electronics detect the battery.