Hiab

This NiMH battery is the reliable power source for the tried and tested radio remote controls from HIAB and Olsbergs. It is specially designed for the older, but widely used control systems HiDrive 4000 and CombiDrive 5000 designed.Often also known under the manufacturer's name Olsbergs, this battery replaces the original parts with the numbers 2055112, 9836713 or the type DA123. With 7.2 Volt and a capacity of mostly 1,500 mAh to 2,000 mAh (depending on the version), it brings your loader crane control back to full power – ideal as a replacement for ageing original batteries.Highlights at a glanceDouble identity (HIAB & Olsbergs): These controllers were often manufactured by Olsbergs for HIAB. The battery is therefore suitable for devices with HIAB-logo as well as those with Olsbergs-label.Full replacement: Fully replaces the original numbers 2055112, 9836713, 984.766.9 as well as the Olsbergs type designation DA123.Modern NiMH technology: Unlike old NiCd batteries, these cells do not suffer from the memory effect. You can recharge the battery flexibly without risking a loss in capacity.Robust housing: The battery is installed in an impact-resistant, black plastic housing, which is specially designed for the tough use on trucks and construction sites.Charging compatibility: Fits mechanically and electrically into the original charging stations of the HiDrive/CombiDrive systems.Compatible systemsThis battery is the heart of the following remote controls:HIAB: HiDrive 4000, CombiDrive 5000Olsbergs: Controller DA123, various OEM systems for loader cranes and forestry machines.Loglift / Jonsered: (If the Olsbergs control system is installed). Characteristics ModelReplacement battery for HIAB / Olsbergs (7.2V) Replaces original no.**2055112**, **804572**, **984.766.9**, D6000, DA143 Chemistry**NiMH** (nickel-metal hydride) Voltage**7.2 V** (6 cells) CapacityTypically **1500 mAh to 2000 mAh** (Stable upgrade) Compatible systemsHIAB **HiDrive 4000**, **CombiDrive 5000**, Olsbergs control DesignBlack, elongated block with lateral guide rails Dimensions (L x W x H in mm)approx. 120 x 55 x 23 Contacting4 recessed contacts on the front side Weight (g)approx. 200 - 220  FAQs about the HIAB / Olsbergs batteryMy battery only says "Olsbergs". Will this HIAB battery fit?Yes. HIAB uses the electronics of the Swedish hydraulics specialist Olsbergs for these systems. The batteries are technically identical, whether the HIAB logo or the Olsbergs brand name is on them. What matters is the design and the voltage of 7.2V.Does the battery also fit the newer HIAB XS Drive?No, mostly not. The XS Drive (often with 7.4V Li-Ion or other NiMH design) usually has a different battery compartment. The HiDrive 4000 batteries are rather flat and wide. Please compare the part number: If you are looking for 2055112, this is the right one.My original battery had less capacity. Is that a problem?No, that's an advantage. Old original batteries often only had 1,200 mAh. A new 2,000 mAh battery, at the same size, has more “endurance”. It lasts longer before you need to change it. The charger just takes a bit longer to fully charge it.

This high-quality NiMH battery is the right power source for the widely used Hiab XS Drive Radio remote controls (often also used with Moffett or Multilift). It replaces the original battery with the part number 378.6692 (often written as 378 6692) and the reference number 16262.Although you wrote "XD Drive" in your enquiry, the part numbers clearly refer to the XS Drive System to. With 2,000 mAh (2.0 Ah), this battery offers a significant increase in performance compared to the older standard batteries (often 1.2 Ah or 1.5 Ah), which means longer charging cycles and fewer interruptions in crane operation.Highlights at a glancePerfect fit for XS Drive: Specially developed for the Hiab XS Drive Transmitter. The battery has the specific housing shape with the side guide rails and the contact block on the front.Replaces Hiab 378.6692: Fully compatible with the original part numbers 378.6692, 378 6692 and the number 16262. Also often replaces batteries from Cargotec or Moffettthat use this control system.High capacity (2.0 Ah): With 2,000 mAh utilise the maximum useful capacity for this design. Your transmitter will last significantly longer than with a used original battery.Reliable NiMH technology: No memory effect. The battery is more robust against deep discharge than Li-Ion variants and can be safely charged with standard NiMH chargers.Gold-plated contacts: High-quality contacts ensure loss-free power transmission and prevent corrosion, which is particularly important in damp weather on the loading crane.Compatible systemsThis battery fits the following control units (please compare part number and appearance):HIAB: XS Drive, XS Drive LiteMoffett: Truck-mounted forklift controls (XS Drive base)Multilift: Roll-off tipper controls (XS Drive base)Squid: Various terminal tractors (if XS Drive is installed) Characteristics ModelReplacement battery for HIAB XS Drive Replaces original no.**378.6692**, **379.6692**, 16262, AX-HI6692, AMH0627 Chemical**NiMH** (nickel-metal hydride) Voltage**7.2 V** (6 cells) Battery capacityTypically **2000 mAh** (standard) to **2300 mAh** (high power) Compatible transmittersHIAB **XS Drive** (modern series) DesignFlat, wide block (approx. 120 x 50 mm) Dimensions (L x W x H in mm)approx. 120 x 50 x 22 (significantly flatter than the CombiDrive battery!) Charging informationRequires special XS-Drive charger (battery is inserted flat) Weight (g)approx. 200 - 210 FAQs about the Hiab XS Drive battery (3786692)Can I use this NiMH battery if my old one was Li-Ion?Caution advised.Li-Ion batteries are also available for the XS Drive (often grey/black with a different number). These require a Li-Ion charger. If your charger and your old battery are NiMH (nickel-metal hydride), this article is perfect. If you have a pure Li-Ion charger, this battery will not fit electrically or will not charge. Check the charger's rating plate!What does the number 16262 mean?This is a common reference number.The number 16262 is often used by replica manufacturers or in cross-reference lists to identify this specific battery type (7.2V Hiab XS). Technically, it corresponds to Hiab number 378.6692.How long does the 2000 mAh battery last?Depending on use.The XS Drive transmitter is relatively economical. With 2,000 mAh, normal crane operation is often several working days possible without recharging. In continuous operation (e.g. 8 hours of uninterrupted transmission), it easily lasts for one to two shifts.