Deye Sun 20K-SG05LP3-EU-SM2 Three-phase hybrid inverter 20KW

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding private and commercial photovoltaic applications. With an enormous nominal capacity of 16 kWh (314 Ah) in just a single compact case module, this storage unit significantly minimises space requirements and installation effort.This model uses proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. In combination with the intelligent battery management system (BMS) and extensive monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for autonomous energy supply to your home or business.Highlights at a GlanceMassive storage capacity (16 kWh): With 314 Ah nominal capacity at 51.2 V, this single module provides enough energy to reliably supply large households even during longer sunless periods.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and almost completely eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large consumers such as heat pumps or wallboxes.Extreme scalability: Up to 32 units can be connected in parallel as standard for even greater energy needs. With a CAN bridge, scaling up to 64 modules is possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage unit features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Durability & efficiency: Certified for over 6,000 charge cycles (at 25°C), which ensures reliable operation for decades in daily use.Flexible installation: Despite the high weight, the case system is extremely flexible and can be installed on the wall, floor-standing, or stacked.Areas of ApplicationThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family homes: Maximises the self-consumption of PV electricity and, in combination with a hybrid inverter, provides powerful emergency power for the entire building.Commercial applications (C&I): Used to cap expensive load peaks (peak shaving) and store large PV surpluses in agricultural or commercial operations.Off-grid & island systems: Thanks to its gigantic capacity and high continuous discharge performance, provides a reliable energy source for totally off-grid properties.Installation & Safety InstructionsLogistics and weight: At 109 kg, the module is extremely heavy. Transport must always be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of site: The storage unit must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², to avoid overheating and voltage losses.Commissioning with parallel connection: When connecting several SE-F16 modules together, all units must be charged to exactly the same voltage level prior to cabling in order to avoid dangerous equalisation currents. Features  ModelDeye SE-F16 (Series C with display) Technology**LiFePO4** (lithium iron phosphate) Nominal voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Nominal capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + App (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor-mount, wall-mount or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference is in capacity and housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 offers 11.8 kWh (230 Ah) and weighs about 84 kg. Both use the same 51.2 V architecture and are designed for identical applications, but the F16 provides significantly more autonomy per installed module.What does the "C" stand for in the model name SE-F16-C?The suffix "-C" in Deye storage refers to the extended model variant, which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the case. This allows the current state of charge (SoC), cell voltages, and warnings to be read directly on the device without having to open the app.Do I necessarily need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "plug & play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. For third-party brands (such as Victron, SMA, or Solis), communication must first be configured manually using DIP switches or software settings.

The Deye AI-W5.1-B with 30.72 kWh capacity is the ideal solution for demanding energy projects in both private and commercial environments. Thanks to its pluggable, scalable design and high-performance technology, this storage system combines maximum efficiency with maximum flexibility.Highlights at a glanceHigh storage capacity: 30.72 kWh for large energy requirements High charging/discharging capacity: Up to 250 A for instant energy utilisation Low-voltage battery technology: 51.2 V for maximum compatibility and safety Modular and expandable: Perfectly adaptable to growing energy needs Pluggable system: Simple, quick installation without complex cabling Robust and durable: Industrial-grade design for long service life and reliable operationMaximum storage capacity for demanding applicationsWith an impressive usable capacity of 30.72 kWh, the Deye AI-W5.1-B offers a solution for maximum energy independence. Whether as centralised storage in residential buildings with high power consumption or for peak load coverage in commercial applications. This storage system reliably provides energy at all times.Flexibility and future-proofingThe modular architecture enables individual adaptation to almost any project. The storage can be easily expanded and flexibly adapts to changing requirements, entirely without time-intensive reinstallation.Solid technology for long-term useWith a height of just under two metres and a weight of more than 330 kg, the device is designed for continuous stationary operation. The combination of advanced battery technology, intelligent management system and reliable protection functions makes the storage system a long-term investment in a stable energy supply.Who is the Deye AI-W5.1-B 30 kWh suitable for?This storage system is ideal for: Large consumers in single and multi-family homes Companies with PV systems that want to be independent of the grid Project developers realising storage solutions for industry and commerce Installers who want to save time and work modularly ModelDEYAI-W30.7-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)44.8-57.6 System capacity (kWh)30.72 System usable capacity (kWh)27.6 Charging/discharging current (A) - Recommendation250 Charging/discharging current (A) - Nominal value250 Charging/discharging current (A) - Peak discharge (2 min,25°C)360 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication connectionCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m Housing IP protection classIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)720 * 255 * 1974 Weight (kg)339.5 Installation locationFloor installation Recommended discharge depth90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsCE/IEC62619 /VDE2510-50/ UL1973/UL9540A/UN38.3  FAQs about the 30 kWh Deye AI-W5.1-B energy storageWhat voltage and currents apply to the 6-module tower?A tower with six modules achieves a nominal voltage of 307.2 V (6 × 51.2 V at 100 Ah). The permissible continuous current is 50 A per tower, briefly up to 150 A for 10 seconds is possible.How far can the system be expanded in total?The system is designed for maximum flexibility. Six modules are possible per tower, which is equivalent to 30.7 kWh. By paralleling up to six towers a total capacity of around 184 kWh can be realised.Which hybrid inverters is the 30 kWh tower compatible with?The storage is officially approved for three-phase Deye hybrid inverters of the SUN-xK-HP3 and SUN-xK-BM series. The combination is factory matched, plug & play is possible without further configuration.Is outdoor installation of the tower permitted?Yes, the system is fully protected against dust and water jets thanks to IP65 housing. The permissible temperature range is between –20 °C and +55 °C, with a humidity of up to 95 %. The prerequisite is a weather-protected location with free air circulation.Does the system require active cooling?No, the storage operates fanless with passive convection. The manual only prescribes a minimum distance of 20 cm behind the housing to ensure sufficient heat dissipation. Scope of supply Deye AI-W5.1-B Modular Battery System (30.72 kWh): System compositionThis product is a set and consists of seven separate main components which together result in a 30.72 kWh tower system.Component 1: Deye AI-W5.1-B-BMS (control unit & base)The central control unit (BMS cluster) that manages the entire system. This unit forms the base of the battery tower.Components 2 to 7: Six Deye AI-W5.1-BATT battery modules (each 5.12 kWh)Six pure battery modules of 5.12 kWh each, which are stacked on the BMS unit and on top of each other.1 x set of battery connection cables (plus & minus)A pair of high-performance cables for connecting the BMS unit with an external hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the BMS and the inverter.5 x connection bridges / parallel connection cablesShort, robust cables or fixed bridges for interconnecting the six battery modules.1 x earth cableA protective conductor cable for correct earthing of the BMS unit.1 x mounting accessories (tower mounting)Includes screws or locking mechanisms to safely connect the seven components into a tower.1 x operating and installation manualA printed manual describing the installation of the entire tower system.

The Deye SUN-15K-SG05LP3-EU-SM2 is a powerful three-phase hybrid inverter designed for demanding commercial and residential photovoltaic systems. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile application options, it is a reliable solution for modern energy systems.Highlights at a glanceHigh output: 15 kW nominal output for medium to large PV systemsFlexible battery insert: Compatible with 48 V lithium-ion and lead-acid batteriesHigh charging and discharging current: up to 280A for fast energy storageParallel connection: operation of up to 10 devices possible, on-grid and off-gridDiesel generator compatible: support for external energy sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate through intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 percent and MPPT efficiency of over 99 percent, the system is extremely efficient and energy-optimised.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, the SUN-15K is versatile thanks to AC coupling and parallel operation. The combination with up to 10 inverters and various battery types enables scalable storage solutions and maximum system availability.Intelligent grid and off-grid system operationThe inverter supports operation on the public power grid as well as stand-alone operation. The integrated communication via RS485, CAN, WLAN, GPRS or LAN (optional) allows easy integration into monitoring and control systems. The protective functions and IP65 protection class guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems in the commercial or private sector with medium energy requirementsSystems that are operated parallel to the mains or off-gridProjects with requirements for maximum flexibility and reliabilityExisting systems that are to be modernised via AC coupling  ModelSUN-15K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)280A Max. Discharge current (A)280A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)24000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power15000 Max. AC input/output apparent power16500 AC input/output rated current (A)22.8/21.8 Max. AC input/output current (A)25/24 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)50.6 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low-voltage batteries with a voltage of 40-60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6 %, the EU efficiency is 97.0 %, which means very low losses.How many MPPTs and strings does it support?It has two MPP trackers, to each of which up to two PV strings can be connected (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 devices are possible in parallel in on-grid or off-grid operation to flexibly scale system performance and capacity.Which protective functions are integrated?It is protected to IP65 and is therefore protected against dust and water jets. It also has comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuits, earth faults and arcing ("AFCI"). Scope of delivery: Deye SUN-15K-SG05LP3-EU-SM2 Three-phase hybrid inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with 15 kW output, integrated LCD colour touchscreen and support for 48V batteries.1 x Wall Mount BracketA robust metal rail for securely fastening the appliance to a wall with the appropriate load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local WLAN network for monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)Folding current transformers for recording the energy flows at the house connection, which are necessary for functions such as zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The corresponding plug pairs (plus and minus) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for the data connection between the inverter and the battery management system of the storage system.1 x mounting kitContains the required stainless steel screws and heavy-duty plugs for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with technical specifications, wiring diagrams, installation instructions and safety instructions.

The DEYE AI-W5.1-B in the 15 kWh version is a powerful, pluggable, and scalable energy storage system for demanding applications in the private and commercial sector. It impresses with high storage capacity, efficient charging and discharging performance, as well as easy integration into existing PV systems.H2: Highlights at a glanceHigh storage capacity: 15.36 kWh for large energy requirementsPowerful charging/discharging current: Up to 250 A for fast energy deliveryLow voltage system: 51.2 V for increased safety and compatibilityEasy installation: Pluggable system for fast integrationScalability: Expandable for growing energy needsRobust design: Long service life and reliability – ideal for demanding applicationsH2: Efficient energy storage for modern systemsThe DEYE AI-W5.1-B is specially designed to reliably store large amounts of energy. The capacity of over 15 kWh in combination with a high charging/discharging current of 250 A makes it an ideal solution for the efficient use of solar power, even with higher load requirements.Flexible integration & modular extensionThanks to the pluggable design, the storage system can be particularly easily integrated into new or existing photovoltaic systems. The modular architecture enables a scalable storage solution that grows with energy requirements, whether in a private home, apartment building or commercial operation.Robust technology for reliable operationThe high-quality housing and solid construction ensure safe use, even in demanding conditions. With its modern battery management system, the storage unit offers maximum safety, longevity, and a stable energy supply.Who is the DEYE AI-W5.1-B 15 kWh battery storage suitable for?This energy storage system is ideal for: Homeowners who want to increase their independence and reduce electricity costs Commercial operators who want to absorb load peaks or integrate backup power solutions Installers who rely on simple, modular systems PV projects where future-proof and expandable storage systems are needed  ModelDEYAI-W15.3-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)44.8-57.6 System capacity (kWh)15.36 System usable capacity (kWh)13.8 Charging/discharging current (A) - Recommendation150 Charging/discharging current (A) - Nominal value250 Charging/discharging current (A) - Peak discharge (2 min,25°C)360 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m Enclosure degree of protection (IP)IP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)720 * 255 * 1131 Weight (kg)180.5 Installation locationFloor installation Recommended depth of discharge90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsCE/IEC62619 /VDE2510-50/ UL1973/UL9540A/UN38.3  FAQs about the DEYE AI-W5.1-B energy storageHow far can I expand the system later?Up to six modules can be combined per tower, resulting in 30.7 kWh storage capacity. By connecting up to six towers in parallel, an expansion to a maximum total capacity of 184 kWh is possible without additional control technology.Which hybrid inverters is the 15 kWh package compatible with?The storage package is officially approved for three-phase Deye hybrid inverters of the SUN-xK-HP3 and SUN-xK-BM series. The systems are fully matched; plug-&-play operation is possible directly, without manual configuration.Do I need active cooling?No, the system operates completely fanless with passive convection. The only important thing is a location with free air circulation, as recommended in the manual. Additional air conditioning is not required.Does the battery need to be fully charged before first operation?Yes, the initial charge to 100% is necessary to ensure correct SoC (State of Charge) detection. If this step is skipped, deviating capacity displays and charging behaviour may occur.How loud is the battery in operation?The battery works completely without active fans and is therefore practically silent. Only relays switch briefly when switching, which is briefly audible. During regular operation, the system remains silent. Scope of delivery Deye AI-W5.1-B Modular Battery System (15.36 kWh): System compositionThis product is a set and consists of four separate main components, which together result in a 15.36 kWh tower system.Component 1: Deye AI-W5.1-B-BMS (control unit & base)The central control unit (BMS Cluster), which manages the entire system. This unit forms the base of the battery tower.Component 2, 3 & 4: Three Deye AI-W5.1-BATT battery modules (each 5.12 kWh)Three pure battery modules of 5.12 kWh each, which are stacked on the BMS unit and on top of each other.1 x set of battery connection cables (plus & minus)A pair of high-performance cables for connecting the BMS unit to an external hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the BMS and the inverter.2 x connection bridge / parallel connection cableShort, robust cables or fixed bridges to connect the three battery modules with each other.1 x grounding cableA protective conductor cable for proper grounding of the BMS unit.1 x mounting accessories (tower mounting)Includes screws or locks to securely connect the four components into a tower.1 x operating and installation manualA printed manual describing the installation of the entire tower system.

The Deye SE-G5.1Pro-B is a powerful battery module with 5.12 kWh storage capacity based on safe lithium iron phosphate technology (LiFePO₄). With its modular design, support for high-current applications and its flexibility in installation, it is the ideal solution for modern energy storage systems in private and commercial settings.Highlights at a glanceSafe & durable: Cobalt-free LiFePO₄ cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting & 19" rack Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith a single capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a module in large modular storage systems. Thanks to the possibility to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is possible. Perfect for applications with increasing energy needs. Automatic network addressing as well as support for firmware updates via USB or remote access make commissioning and maintenance much easier.Flexible to mount – space-saving & installation-friendlyThanks to three mounting options, rack mounting (19 inch), wall mounting or floor installation, the module can be optimally positioned in almost any environment. With its compact form of only 133 mm height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and future-proof storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators & installers who value easy integration and low maintenance  Sustainability-orientated users who rely on environmentally friendly storage technology ModelDEYSE-G5.1 Pro-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)43.2-57.6 System capacity (kWh)5.12 System usable capacity (kWh)4.6 Charge/discharge current (A) - Recommendation50 Charge/discharge current (A) - Nominal value100 Charge/discharge current (A) - Peak discharge (2 min,25°C)150 Operating temperature (°C)Charge: 0 ~ 55 / Discharge: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP protection class of the housingIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)440 * 133 * 540 Weight (kg)45 Installation locationFloor mounting, rack mounting Recommended depth of discharge90% Cycle lifetime25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3, IEC62619, CE,UK, VDE2510-50, CEI 0-21, FCC, UL1973, UL9540A  FAQs about the Deye SE-G5.1Pro-B battery storage unitHow much energy is actually usable?One module delivers 5.12 kWh gross capacity, of which around 4.6 kWh is usable at 90% depth of discharge, particularly suitable for private and commercial applications.What voltage and currents apply per module?The module operates at 51.2 V nominal voltage and 100 Ah capacity. The continuous current is 50 A, with up to 150 A possible for 10 seconds at peak.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, giving a total capacity of over 327 kWh. For home use: six modules per stack, i.e. 30.7 kWh per unit.How long does the module last?The cells achieve over 6,000 cycles at 90 % DoD, with a residual capacity of at least 70 % at the end of life, so they are designed for long-term use.Which Deye inverters is the system compatible with?The battery is officially released for all three-phase hybrid inverters of the SUN-xK-HP3 and SUN-xK-BM series, fully plug-&-play enabled without additional modifications. Scope of delivery Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a single, flexible low-voltage battery module for installation in 19-inch racks, for wall mounting or floor mounting.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including an intelligent, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for attaching the module in a 19-inch rack.1 x set of battery connection cables (plus & minus)A pair of pre-assembled high-performance cables for connecting the module (or the battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect the power and data bus of this module to another module.1 x earthing cableA protective conductor cable for proper earthing of the housing.1 x operating and installation manualA printed manual that describes the various installation methods (rack, wall, stack).2 x wall bracketsFor wall mounting of the battery pack 4 x feetFor stacking and securing the battery