XP

The XCELL XP1.26 is a compact and reliable 6-volt lead-acid battery with a capacity of 1.2 Ah. It impresses with its long service life, low self-discharge and flexible application possibilities in various applications where a constant power supply is required.Highlights at a glanceLong service life: Designed for a service life of up to 10 years at 20 °C.Compact design: At just 97 x 24 x 58 mm, ideal for space-critical applications.High reliability: Absorbent Glass Mat technology (AGM) ensures leak-proof and low-maintenance operation.Wide temperature range: Powerful in discharge operation from -15 °C to +50 °C.High safety: Robust ABS housing, UL and CE certified.Powerful for various areas of applicationThe XP1.26 is particularly suitable for applications requiring stable emergency power. Typical fields of application are security and alarm systems, lighting systems, telecommunications or small UPS systems. Thanks to its high discharge currents of up to 18 A for 5 seconds, it is also reliable during short-term peak loads.Efficiency through robust technologyWith a low self-discharge of only about 9% in three months (at 25 °C), the battery remains ready for use even after long idle periods. The temperature resistance allows flexible use in demanding environments. In addition, AGM technology ensures uniform performance and minimal maintenance.Compact dimensions and flexible installationThe XCELL XP1.26 weighs only 0.28 kg and is easy to integrate thanks to its small dimensions. The T1 connections ensure simple installation. Thanks to the robust design and the option of standby and cycle operation, the battery is versatile and impresses with consistent performance throughout its service life.Characteristics ModelXCELL XP1.2-6 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby)6.75V - 6.9V Charging voltage (cyclic use)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 24 x 57 Weight (kg)approx. 0.3 ConnectionSolder terminal CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP1.26How long does the battery last?The XP1.26 is designed for a service life of up to 10 years in standby mode at 20 °C.Which applications is the battery suitable for?The battery is ideal for security systems, emergency lighting, telecommunications systems, small UPS systems and other devices that require a reliable 6V power supply.Can the battery be installed in different positions?Yes, thanks to AGM technology, flexible installation is possible without impairing performance.How high is the self-discharge?At 25 °C, the self-discharge is approx. 9% in three months, 18% in six months and 35% after one year.Is the housing flame-retardant?Yes, the housing is made of ABS plastic and meets the UL94 V0 classification.What connections does the battery have?The battery is equipped with a 4.8 mm Faston terminal.Is the XP1.26 maintenance-free and leak-proof?Yes, thanks to AGM technology, the battery is maintenance-free, leak-proof and can be operated in any position.

The XCELL XP3.2-6 is a powerful and compact lead-acid battery that impresses with a capacity of 3.2 Ah at 6 V. It offers reliable power supply, long service life, and a robust construction that makes it ideal for professional use in safety-critical and industrial applications.Highlights at a glanceHigh capacity: 3.2 Ah with 20-hour discharge up to 5.25 V.Reliable technology: AGM technology for maintenance-free and leak-proof operation.Long service life: Up to 10 years standby operation at 20 °C.Compact design: Only 134 x 35 x 67 mm in size, weight 0.6 kg.High safety: Robust ABS housing (UL94 V0) with UL and CE certification.Stable and powerful for a wide range of applicationsWith a maximum discharge rate of 48 A (5 seconds), the XP3.2-6 is also perfectly suited for short-term peak loads. It is used in security and fire alarm systems, UPS systems, emergency lighting, telecommunications, and other applications that require a reliable 6V power source.Efficiency through robust technologyThe low self-discharge rate of around 9% in three months (at 25 °C) guarantees high availability even after extended storage. In addition, due to its temperature resistance from -15 °C to +50 °C in discharge operation, the battery remains flexible in use. The AGM technology ensures consistent performance with minimal maintenance.Compact dimensions and easy installationThanks to its slim design and Faston 4.8 mm terminals, the battery can be quickly and safely integrated. Weighing only 0.6 kg, it is easy to handle while providing a reliable energy solution with long service life.Characteristics ModelXCELL XP3.2-6 Battery typeVRLA AGM (standby / all-purpose) Nominal voltage (V)6 Capacity (Ah)3.2 (at 20h rate) Maximum discharge current48A (for 5 seconds) Charging voltage (floating charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 34 x 66 Weight (kg)approx. 0.64 TerminalFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP3.2-6How long is the service life of the battery?The XP3.2-6 is designed for a service life of up to 10 years in standby operation at 20 °C.In which applications is the battery used?It is particularly suitable for security installations, emergency lighting, telecommunications, UPS systems and other devices that require a stable 6V power supply.Is the battery maintenance-free?Yes, thanks to AGM technology, the battery is absolutely maintenance-free and leak-proof.How high is the self-discharge?The self-discharge is about 9% in three months at 25 °C, 18% in six months and 35% after one year.Is the case flame-retardant?Yes, the ABS housing complies with UL94 V0 classification for flame retardancy.What type of terminal does the battery have?The battery is equipped with a 4.8-mm Faston (blade) terminal. 

The XCELL XP56 is a reliable 6-volt lead-acid battery with a 5 Ah capacity, representing long-lasting performance, high safety, and a compact design. It is ideally suited for safety-critical applications where a constant power supply is required.Highlights at a glanceHigh capacity: Delivers 5 Ah with a 20-hour discharge to 5.25 V.Long service life: Up to 10 years standby operation at 20°C.High current capability: Maximum discharge current of 75 A for 5 seconds.Compact & lightweight: Dimensions 70 x 47 x 107 mm with a weight of only 0.8 kg.Safe & robust: Housing made from ABS plastic (UL94 V0), UL and CE certified.Reliable for a range of applicationsThe XP56 is a proven energy storage unit for security and alarm systems, emergency lighting, UPS systems, telecommunications, and many other devices with 6V power supply. Its high load capability makes it particularly suitable for applications with short-term peak loads.Technology that deliversThanks to Absorbent Glass Mat (AGM) technology, the battery is leak-proof, maintenance-free, and provides consistent performance. Its low self-discharge rate of approx. 9% in three months (at 25°C) ensures it remains reliably ready for use even after extended idle periods. Its operating temperature range of -15°C to +50°C in discharge mode also allows for flexible use in different environments.Compact design and simple installationWith T1 terminals (Faston 4.8 mm), the XP56 can be installed quickly and safely. Its slim dimensions make it especially suitable for devices and systems where space is at a premium. The robust construction ensures maximum operational safety.Specifications  ModelXCELL XP5-6 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)70 x 47 x 107 Weight (kg)approx. 0.81 TerminalFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  Frequently Asked Questions about the XCELL XP56How long is the battery’s service life?The XP56 offers a standby service life of up to 10 years at 20°C.What applications is the battery suitable for?The battery is ideal for security and fire alarm systems, emergency lighting, UPS systems, and telecommunications equipment.How high is the self-discharge?At 25°C, self-discharge is about 9% after three months, 18% after six months and 35% after a year.What terminals does the battery have?The XP56 is equipped with Faston 4.8 mm terminals (T1) which allow for easy and secure installation.What technology does the battery use and is it maintenance free?It is a sealed AGM (Absorbent Glass Mat) lead-acid battery with ABS housing. It is maintenance free, leak-proof and can be used in any installation position.What is the battery’s operating temperature range?The recommended temperature range for operation is –15 °C to +50 °C for discharging and –10 °C to +50 °C for charging; storage is possible from –20 °C to +50 °C. 

The XCELL XP76 is a powerful 6-volt lead-acid battery with a capacity of 7 Ah. It impresses with its long service life, high current carrying capacity and reliable AGM technology. This makes it the ideal solution for applications that require a reliable and constant power supply.Highlights at a glanceHigh capacity: 7 Ah with 20-hour discharge up to 5.25 V.Long service life: Designed for up to 10 years of standby operation at 20 °C.High load capacity: Delivers up to 105 A (5 seconds).Compact design: Dimensions 151 x 34 x 100 mm with 1.12 kg weight.Flexible connection: Available with T1 or T2 terminals.Safe & certified: Robust ABS housing (UL94 V0), UL and CE certified.Reliable performance for various applicationsThe XP76 is versatile and is particularly suitable for emergency and security lighting, UPS systems, alarm systems, telecommunications as well as medical and industrial devices. Thanks to its high current carrying capacity, it provides a stable power supply even during short-term peak loads.Robust technology for long operational readinessWith its AGM technology, the battery is absolutely maintenance-free and leak-proof. The low self-discharge (approx. 9 % in three months at 25 °C) ensures reliable operational readiness even after longer periods of storage. In addition, the XP76 remains powerful in a wide temperature range from -15 °C to +50 °C in discharge operation.Compact dimensions and easy integrationThanks to its slim design and practical T1/T2 connections, the battery can be easily integrated into existing systems. With only 1.12 kg, it is easy to handle and impresses with its robust construction, which guarantees maximum operational safety.Features  ModelXCELL XP7-6 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 34 x 100 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP76How long is the service life of the battery?The XP76 is designed for up to 10 years of standby operation at 20 °C.For which applications is the battery suitable?Typical areas of application include telecommunications, hazard alarm systems, UPS systems, security technology and applications in medical and railway technology.Is the battery maintenance-free?Yes, the AGM technology makes the battery maintenance-free and leak-proof.How high is the self-discharge?The self-discharge rate is approx. 9 % after three months, 18 % after six months and 35 % after twelve months (at 25 °C).Which connection variants are available?The XP76 is available with either T1 or T2 terminals to allow flexible installation.What is the nominal voltage and capacity of the XCELL XP76?The battery has a nominal voltage of 6 volts and a capacity of 7 Ah.In which temperature range can the battery be used?The recommended operating temperature range is between −15 °C and +50 °C.What are the housing and safety features of the battery?It uses a robust ABS housing, is UL and CE certified, and specified for floating applications at about 20 °C.

The XCELL XP0.812JST is a particularly compact 12-volt AGM lead-acid battery with a nominal capacity of 0.8 Ah. Thanks to the pre-assembled JST plug connection, it can be quickly integrated into devices with limited installation space and provides a reliable, maintenance-free power supply in continuous and cyclical operation.Highlights at a glanceSpace-saving and lightweight: 96 x 25 x 62 mm at only 0.33 kgReady for connection: integrated JST connector with stranded wiresReliable capacity: 0.8 Ah at 20 h up to 10.5 VLong service life: Designed for up to 10 years in standby mode at 20 °CSafety and quality: AGM technology, ABS housing, UL and CE, ISO 9001Power for compact applicationsWhether emergency lighting, safety and signalling technology, measuring devices or small controllers. The XP0.812JST delivers a stable 12 V and can withstand short-term discharge currents of up to 5 A for 5 seconds. The internal impedance of approx. 200 mΩ (fully charged, 25 °C) supports consistent power delivery.Availability even after storage periodsAt 25 °C, self-discharge is approx. 9 per cent after 3 months, approx. 18 per cent after 6 months and approx. 35 per cent residual capacity loss after 12 months. This means the battery remains ready for use even after storage phases. The permissible temperature range during discharge operation extends from −15 °C to +50 °C.Installation and charging technologyThe battery is connected via the pre-assembled JST plug connector and can be mounted immediately. For standby operation, a final charging voltage of 13.60 to 13.80 V at 25 °C is recommended, with temperature compensation of −18 mV per °C. In cycle operation, the charging parameters are 14.50 to 14.90 V at 25 °C, compensation −30 mV per °C. The maximum charging current is 0.24 A.Features  ModelXCELL XP0.8-12JST Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)0.8 (at 20h rate) Maximum discharge current12A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)96 x 25 x 62 Weight (kg)approx. 0.35 ConnectionJST connector CertificationsISO9001, CE, UL  FAQs about XCELL batteries with JST connectorHow long is the expected service life of the XP0.812JST on standby?At 20 °C, the battery is designed for up to 10 years in float operation.Is the XP0.812JST battery suitable for cyclical applications?Yes, use the cycle charging voltage of 14.50 to 14.90 V at 25 °C and observe the maximum charging current of 0.24 A.What is special about the JST version?The battery has a pre-assembled JST connector with wires. This enables quick, reverse polarity-proof integration into suitable devices and cable harnesses.What temperatures are permissible during operation?Discharge is possible between -15 °C and +50 °C. The battery should be charged at temperatures from -10 °C to +50 °C. For longer storage, temperatures from -20 °C to +50 °C are permissible.How high is the self-discharge?At 25 °C, approx. 91 per cent of the capacity remains after 3 months, approx. 82 per cent after 6 months and approx. 65 per cent after 12 months. Regular recharging in float operation is recommended. 

The XCELL XP0.812 is a compact 12-volt lead-acid battery with a capacity of 0.8 Ah that impresses with its reliable performance, robust design and maintenance-free AGM technology. It is ideal for applications where space is limited but a stable power supply is required.Highlights at a glanceCompact design: Dimensions of only 96 x 25 x 62 mm with a weight of 0.33 kg.Reliable power: 0.8 Ah capacity with 20-hour discharge up to 10.5 V.Long service life: Up to 10 years in standby mode at 20 °C.High level of safety: Robust ABS housing, UL and CE certified.Maintenance free: AGM technology ensures leak-proof operation.Versatile in useThe XP0.812 is used in security and alarm technology, emergency lighting, measuring devices, telecommunications and many other compact applications. With a maximum discharge current of 5 A (5 seconds), it offers a stable power supply even during short-term load peaks.Efficiency and durabilityThanks to its low self-discharge (approx. 9 % in three months at 25 °C), the battery remains reliably ready for use even when stored for long periods. The temperature resistance of -15 °C to +50 °C in discharge mode enables flexible use in a wide range of environments.Compact dimensions for easy integrationWith its slim design and plug connections, the XP0.812 can be quickly and easily integrated into existing systems. It offers a robust and durable solution for all applications where compact size and operational reliability are crucial.Features  ModelXCELL XP0.8-12 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)0.8 (at 20h rate) Maximum discharge current12A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Battery lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)96 x 25 x 62 Weight (kg)approx. 0.35 ConnectionAMP connector CertificationsISO9001, CE, UL  Frequently asked questions about the XCELL XP0.812How long does the XP0.812 battery last?The XP0.812 is designed for a service life of up to 10 years in standby mode at 20 °C.In which areas is it used?Typical applications include security systems, emergency lighting, telecommunications, measuring devices and other compact devices with a 12V power supply.Is the battery maintenance-free?Yes, the AGM technology makes it completely maintenance-free and leak-proof.How high is the self-discharge rate?Self-discharge is approx. 9 % after three months, 18 % after six months and 35 % after one year at 25 °C.In which temperature range can the battery be used?The battery can be used in a temperature range from -20 °C to +50 °C. 

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The XCELL XP2.3-12 is a slim 12 volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides reliable power supply in safety-relevant and industrial applications and, with VdS G 115071, fulfils the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS recognised: G 115071, additionally UL and CE, manufactured to ISO 9001Power reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm at approx. 0.9 kgMaintenance-free: valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security equipment, emergency lighting, fire alarm systems, communications and measuring devices, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) supports stable voltage supply, even during short-term load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C with temperature compensation of minus 18 mV per °C is recommended. In cyclic operation, the end-of-charge voltages are 14.50 to 14.90 V at 25 °C, compensation minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, minus 10 °C to plus 50 °C during charging, and minus 20 °C to plus 50 °C for storage.Dimensions and connectionThe T1 flat plug connectors made of copper allow quick integration into existing systems. The compact, elongated design means the battery can be positioned particularly well in narrow housings and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP2.3-12What is the expected service life for the XP2.3-12 in standby operation?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years in float operation. Regular test cycles and correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety-related systems such as fire alarm systems and intruder alarm systems, emergency lighting, communications and measuring devices, as well as controls with 12 volt supply.Which charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please observe the respective temperature compensation.What is the self-discharge rate?At 25 °C, about 91 per cent capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.Which connectors are present on the XP2.3-12?The XP2.3-12 is equipped with T1 flat plug connectors made of copper for quick, secure installation. 

The XCELL XP3.4-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 3.4 Ah. It delivers stable performance in safety-relevant and industrial applications and can be integrated quickly thanks to T1 flat plug connections. VdS approval and production in accordance with ISO 9001 emphasise its suitability for professional use.Highlights at a glance3.4 Ah with 20-hour discharge up to 10.5 VVdS recognised, additionally UL and CELow internal resistance of approx. 45 mΩ for reliable power outputSlim format 134 x 67 x 66.5 mm at approx. 1.20 kgMaintenance-free thanks to VRLA-AGM and robust ABS housingPerformance for demanding applicationsThe XP3.4-12 ensures a reliable 12 V supply for fire alarm and intruder alarm systems, emergency and safety lighting, control and regulation technology as well as measuring and communication devices. Even short-term load peaks are absorbed in a stable manner.Efficiency and service lifeThe usable capacity is maintained over a wide temperature range: At 40 °C it is 103 per cent, at 25 °C it is 100 per cent and at 0 °C it is still 86 per cent. The VRLA-AGM technology ensures minimal maintenance and constant performance throughout the entire service life.Technology and installationT1 flat plug connections enable fast, reverse polarity protected integration. In standby mode, a charging voltage of 13.5 to 13.8 V at 25 °C with temperature compensation of minus 20 mV per °C is recommended. In cycling mode, 14.4 to 15.0 V at 25 °C with minus 30 mV per °C. The initial charging current in cycling mode should be less than 1.02 A.Features  ModelXCELL XP3.4-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)3.4 (at 20h rate) Maximum discharge current51A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP3.4-12What is the XP3.4-12 battery particularly suitable for?For safety systems such as fire alarm and intruder alarm systems (BMA and EMA), emergency and safety lighting, controls, communication and measuring devices, and other 12-volt systems with moderate to medium loads.Which charging voltages must be observed?In standby mode, the voltage at 25 °C is 13.5 to 13.8 V. In cycling mode it is between 14.4 and 15.0 V. Please note the respective temperature compensation.Which connections are available on the XP3.4-12?T1 flat plug connections for quick, reverse polarity protected installation in existing cable assemblies.Is the battery maintenance-free?The VRLA-AGM technology enables leak-proof, low-gassing and practically maintenance-free operation.Are there different versions with and without VdS approval?Yes, in addition to the VdS version with the designation G 125002, there are dealer offers for the standard version without VdS approval, which should be taken into account when selecting the product.How does the temperature affect the capacity?The capacity depends on temperature and at 40 degrees Celsius is about 103 percent of the nominal value, at 25 degrees Celsius 100 percent and at 0 degrees Celsius 86 percent. 

The XCELL XP7-12 is a valve-regulated AGM battery with 12 volts and 7 Ah nominal capacity (C20). It impresses with its compact dimensions, high operational reliability and long service life. Thanks to its robust design and low self-discharge, it is ideal for use in safety and emergency power systems, medical technology, measurement and control technology, telecommunications and numerous mobile and stationary applications.Highlights at a glanceCompact performance: 12 V, 7.0 Ah (20h)Flexible use: Any operating position possible (except permanently overhead)Durable: up to 5 years design life at 20 °CHigh reliability: Low self-discharge <3 % per month at 25 °CRobust housing: ABS UL94 HBReliable power supply for a wide range of applicationsThe XCELL XP7-12 delivers constant performance even under demanding conditions. The AGM technology ensures efficient gas recombination, making the battery virtually maintenance-free. With a maximum discharge current capacity of 105 A (5 seconds), it is also suitable for applications with short-term peak loads.Efficiency meets service lifeIn standby operation, the battery should be charged with a charging voltage of 2.25–2.30 V/cell. For cyclic operation, a charging voltage of 2.45–2.50 V/cell is recommended. The temperature compensation is –3 mV/cell/°C in standby operation and –4 mV/cell/°C in cycle operation. The recommended maximum current is 0.3C (approx. 2.1 A). In cycle use, depending on the depth of discharge, the battery achieves several hundred charge and discharge cycles.Technology for flexible applicationsThe operating temperature range of the cells when charging is between –15 °C and +50 °C. When discharging, it is –20 °C to +60 °C and for storage –20 °C to +50 °C. T1 or T2 plug-in connections are available for the electrical connection. The recommended tightening torque for this is between 2 and 3 Newton metres. Each cell is additionally equipped with a safety valve, which further increases operational reliability.Features  ModelXCELL XP7-12 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  FAQ about the XCELL XP7-12 industrial batteryFor which applications is the XP7-12 ideally suited?The XCELL XP7-12 is predestined for emergency power supply, safety and fire alarm systems, medical technology, telecommunications, measurement and control technology as well as mobile devices with cyclic energy requirements.How cycle-resistant is the XP7-12?At 30 % depth of discharge, the battery achieves over 1,000 charge and discharge cycles. At higher depths of discharge, the service life is reduced accordingly, but remains in the range of several hundred cycles.What are the special safety features?The battery is equipped with overpressure valves. Like all VRLA batteries, it can emit small amounts of hydrogen. It should therefore not be used in airtight enclosures and adequate ventilation must be ensured.Which chargers are suitable for the XP7-12?Chargers with constant voltage, designed for VRLA AGM batteries, are recommended. The correct setting of the charging voltage and temperature compensation is crucial for a long service life.How is the battery installed?The battery can be installed in any position except permanently upside down. The connection is made via T1 or T2 plug-in connectors with a tightening torque of 2–3 Nm. 

The XCELL XP7/12F2 convinces as a reliable 12-volt lead-acid battery with 7.2 Ah (20h rate) capacity, robust AGM technology and compact dimensions. Equipped with Faston connectors, this battery is ideal for security and emergency power systems, telecommunications and mobile devices. With a service life of up to 10 years in standby operation, it provides a stable power supply with minimal maintenance.Highlights at a glanceRobust capacity: 7.2 Ah with 20-hour discharge for various areas of applicationLong service life: Up to 10 years standby life at 20 °CHigh discharge reserves: Maximum discharge currents up to 108 A for 5 secondsTemperature resistant: Powerful from -15 °C to +50 °CCompact design: Only 151 x 65 x 100 mm at approx. 2.26 kgStrong performance for demanding areas of applicationThe XCELL XP7/12F2 is the ideal solution for applications that require a compact design with high energy density. Typical areas of use are uninterruptible power supplies (UPS), safety-related lighting systems, medical devices, alarm systems and other industrial applications. Thanks to its Absorbent Glass Mat technology, the battery offers reliable performance even in short-term peak loads.Efficient energy for continuous operationThis battery is characterised by a low self-discharge of only about 9 % in 3 months at 25 °C, making it quickly ready for use even after longer idle periods. Its charging characteristic supports both standby operation with a recommended voltage of 13.60 to 13.80 V and cyclic operation with 14.50 to 14.90 V. With a recommended max. charging current of 2.16 A, the battery remains safe and efficient in operation.Reliable technology for the highest demandsAGM technology ensures leak-proof, maintenance-free operation with an internal gas recovery system. The XCELL XP7/12F2 can be installed in any orientation (except upside down) and reliably withstands temperatures between -15 °C and +50 °C in discharge operation. Its high cycle stability and UL and CE certifications emphasise its suitability for demanding industrial environments.Features  ModelXCELL XP7-12F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, CE, UL  FAQs about the XCELL XP7/12F2 lead-acid batteryHow long is the service life of the battery?The XCELL XP7/12F2 is designed for a service life of up to 10 years in standby operation at 20 °C.What is the battery particularly suitable for?It is ideally suited for applications such as UPS systems, emergency lighting, medical devices, telecommunications systems and mobile electronic devices.Can the battery also be used at low temperatures?Yes, the battery operates reliably in a discharge temperature range from -15 °C to +50 °C.Does the battery require regular maintenance?No, the battery is maintenance-free thanks to its sealed, valve-regulated AGM design.Which charging parameters must be observed?For standby operation, a charging voltage of 13.60 – 13.80 V is recommended, for cyclic operation 14.50 – 14.90 V. The maximum charging current should not exceed 2.16 A. 

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and 12 Ah capacity. With Faston 6.3 mm connectors, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems as well as medical and industrial devices. Its spill-proof AGM technology ensures maintenance-free and long-lasting energy supply.Highlights at a glanceVdS certified: Tested safety according to VdS G120034Compact design: Only 151 x 98 x 95 mm at approx. 4.1 kg weightReliable performance: 12 Ah capacity at 20-hour dischargeHigh discharge current: Up to 180 A (5 sec.) for peak loadsDurable: Up to 5 years of service life at 25 °C in standby modePowerful performance for challenging applicationsThanks to its robust construction and uniform current output, the XP12-12F2 is suitable for a wide range of applications: from safety-relevant systems and telecommunications to medical devices. The Faston connectors (6.3 mm) enable easy integration into existing systems. Even during short-term peak loads, the battery reliably delivers energy with up to 180 A discharge current for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float lifetime of up to 5 years (at 25 °C), the battery is characterised by a low self-discharge rate of less than 3 % per month, making it ready for immediate use even after long storage. It also impresses with good performance at extreme temperatures from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (according to UL94-HB/UL94-V0) and meets international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage in standby operation is 2.25 – 2.30 V/cell (corresponds to 13.5 – 13.8 V) and in cycle operation 2.45 – 2.50 V/cell (corresponds to 14.7 – 15.0 V) at an ambient temperature of 25 °C. Automatic temperature compensation from –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby operation?Under ideal conditions (25 °C ambient temperature), the expected lifetime in standby operation is up to 5 years.Is the battery VdS certified?Yes, the battery holds the VdS approval with the number G120034 and is thus suitable for safety-relevant applications.In which temperature ranges can the battery be used?The battery is designed for a charging range from –15 °C to +50 °C and a discharging range from –20 °C to +60 °C.How high is the self-discharge?At 25 °C, the self-discharge of the battery is below 3 % per month. It is recommended to recharge the battery if stored for more than six months.Which charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cycle operation, it should be 14.7–15.0 V. Temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cycle operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard detection systems as well as for hobby and camping. However, it is not suitable for starting or traction applications.

The XCELL XP18-12 is a high-performance and maintenance-free lead battery known for its reliability and longevity. Based on proven AGM technology (Absorbent Glass Mat), this battery offers a nominal voltage of 12 V and a capacity of 18 Ah. It has been specially developed for demanding stationary and cyclic applications where a constant and secure power supply is crucial. Thanks to its sealed VRLA design, it is leak-proof and can be operated in any position.Highlights at a glanceReliable performance: 18 Ah capacity at 12 V, which corresponds to a total energy of 216 Wh.Durable: Designed for a service life of up to 5 years according to Eurobat classification.Maintenance-free: The VRLA AGM technology eliminates the need to top up water.Safe and flexible: Completely sealed, leak-proof and suitable for installation in any position.Low self-discharge: Ideal for standby operation and seasonal use.VdS approval: VDS G115072Reliable energy for critical applicationsThe XCELL XP18-12 is the ideal energy solution for systems where reliability is paramount. With its standard dimensions of 181 x 77 x 167 mm and a weight of approximately 5.4 kg, it can be easily integrated as a replacement for existing batteries in a wide variety of devices. Its primary areas of application include uninterruptible power supplies (UPS), security and alarm systems, emergency lighting systems as well as applications in medical and rehabilitation technology. The wide operating temperature range ensures stable performance even under demanding environmental conditions.Efficiency and safety thanks to AGM technologyThe AGM technology of the XCELL XP18-12 binds the electrolyte in a glass fibre fleece. This design not only prevents acid leakage, but also provides high vibration resistance and excellent cycle resistance compared to conventional lead-acid batteries. As there is no gassing under normal operating conditions, the battery can be safely used indoors and in housings without special ventilation. This maximises user safety and reduces maintenance to a minimum.Proven and robust lead AGM technologyIn contrast to open lead-acid batteries, the XP18-12 is valve-regulated and sealed thanks to its VRLA design (Valve Regulated Lead Acid). This enables internal gas recombination and ensures consistently high performance throughout its entire service life. The lead calcium grid plates used contribute to a very low self-discharge rate, making the battery perfect for standby operation or for applications with longer periods of inactivity.Features  ModelXCELL XP18-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)18 (at 20h rate) Maximum discharge current270A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle use)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.6 ConnectionM5 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL lead battery XP18-12What does the term AGM mean?AGM stands for "Absorbent Glass Mat". In this technology, the battery electrolyte is bound in a fleece made of glass fibres. This makes the battery leak-proof, maintenance-free and very resistant to vibration.For which applications is the XP18-12 battery suitable?The battery is ideally suited for uninterruptible power supplies (UPS), alarm systems, fire alarm control panels, emergency lighting systems as well as medical and rehabilitation equipment such as patient lifts or electric wheelchairs.What is the expected service life of the battery?The XCELL XP18-12 is designed for a service life of up to 5 years in standby operation (standby) according to the Eurobat classification. The actual service life depends heavily on the application, operating temperature and depth of discharge.Can several XP18-12 batteries be connected together?Yes, you can connect several batteries of this type together. For a higher voltage (e.g. 24 V) connect two batteries in series. For higher capacity, connect the batteries in parallel. Please only use batteries of the same type, age and state of charge.Is the battery actually maintenance-free?Yes, thanks to the sealed VRLA AGM design, the battery is completely maintenance-free. Refilling with distilled water is not required during the entire service life.How should the battery be stored when not in use?Store the battery in a cool, dry place and ensure that it is fully charged. Due to the low self-discharge, the state of charge should be checked every six months and the battery recharged if necessary to avoid deep discharge. 

The XCELL XP26-12 is a powerful, maintenance-free 12-volt lead-acid battery with a 26 Ah capacity (20h rate), characterised by its long service life. It has been specially developed for reliable, safety-relevant and industrial applications. Thanks to its robust AGM technology and M5 inlay connections, it offers a high current output. The battery is also VdS certified (G115073).Highlights at a glanceCertified: VdS G115073, suitable for fire and burglar alarm systemsPowerful performance: 26 Ah capacity at 20-hour dischargeHigh current output: Up to 390 A discharge current (5 seconds)Durable: Up to 5 years service life in standby operation at 25 °CMaintenance-free: Leak-proof AGM technology (VRLA)Powerful performance for challenging applicationsThe XP26-12 ensures a constant and reliable power supply, even during short-term peak loads, with a discharge current of up to 390 A for 5 seconds. With its compact dimensions (165 × 176 × 127 mm) and low weight of approx. 7.9 kg, it is ideal for mobile devices, emergency power supply systems, telecommunications, safety lighting and other industrial applications.Efficient and long-lasting power supplyThe AGM technology ensures maintenance-free operation with a minimum self-discharge of less than 3% per month at 25 °C. For continuous operation (float charging), a voltage of 13.60–13.80 V is recommended, while for cyclic operation 14.50–14.90 V is ideal. Integrated temperature compensation secures the efficiency of the charging performance regardless of the ambient temperature. The maximum charging current is 7.8 A.Technology for reliable safetyThe battery is equipped with a flame-retardant housing according to UL94-HB/V0 and meets international standards such as CE, UL, ISO 9001. The construction enables safe operation over several years in standby mode, with proper maintenance and ambient temperature. Even under difficult conditions, the battery maintains a stable capacity performance, approximately 85 % at 0 °C and 65 % at –15 °C.Features  ModelXCELL XP26-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)26 (at 20h rate) Maximum discharge current390A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP26-12How long is the service life of the XCELL XP26-12 battery?The float service life is 3 to 5 years at an ambient temperature of 25 °C, depending on operating conditions.What is the XCELL XP26-12 suitable for?The battery is suitable for safety-relevant systems (e.g. fire and intrusion alarm systems), UPS systems, telecommunications equipment, medical technology and other industrial applications.Is the XCELL XP26-12 battery VdS certified?Yes, the XCELL XP26-12 holds VdS approval with number G115073.How high is the self-discharge rate?Self-discharge is less than 3 % per month at 25 °C.Which charging parameters must be observed?For standby operation, a voltage of 13.60 to 13.80 V is recommended. In cyclic operation, the voltage is 14.50 to 14.90 V. The maximum charging current should not exceed 7.8 A.Is the battery maintenance-free, leak-proof and can it be used in any position?Yes, the XP 26‑12 VDS is sealed maintenance-free, leak-proof and can be used in any position. 

The XCELL XP45-12 is a robust lead-acid battery with a nominal voltage of 12 volts and a capacity of 45 Ah (20h rate). Thanks to maintenance-free AGM technology, M6 inlay terminals and VdS certification (G115059), this battery is ideally suited for safety-critical and industrial applications. It impresses with its high discharge capacity, long service life and reliable performance even under demanding conditions.Highlights at a glanceCertified: VdS G115059, tested for safety-relevant applicationsHigh capacity: 45 Ah at 20h discharge, 27.9 Ah at 1h loadHigh discharge currents: Up to 450 A for 5 seconds possibleDurable: Up to 12 years float service life at 25 °CMaintenance-free: AGM technology with leak-proof designReliable: Low self-discharge (< 3 %/month)Reliable performance for demanding industrial applicationsThe XP45-12 is characterised by its robust construction and high current output, making it the ideal choice for a wide range of demanding applications. These include uninterruptible power supply systems (UPS), emergency lighting, telecommunications equipment and medical technology as well as other industrial applications. Thanks to its M6 terminals (T4/T9), a stable and reliable connection is ensured. Even during short-term peak loads, the battery reliably supplies up to 450 A of current, underlining its high performance and reliability.Efficient energy and long service lifeThe batteries offer a float service life of up to 12 years at 25 °C, which makes them ideal for continuous use in stationary systems. The recommended charging voltage is 13.50–13.80 V in standby mode and 14.50–14.90 V in cyclic operation. The maximum charging current is limited to 13.5 A. Thanks to the temperature-compensated charging characteristics, energy efficiency is maintained even under fluctuating ambient conditions.Technology for maximum operational safetyThe housing made of flame-retardant ABS meets UL94-HB/V0 standards and reliably protects the cells. Certifications according to UL, CE, ISO 9001 and VdS confirm the high manufacturing quality and safety of the product. The self-discharge is less than 3 % per month, which ensures reliable readiness for use even during longer storage periods.Features  ModelXCELL XP45-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)45 (at 20h rate) Maximum discharge current450A (for 5 seconds) Charging voltage (float charging)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)approx. 14.0 TerminalM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP45-12 lead-acid batteryHow long is the service life of the battery?Under optimal ambient conditions (25 °C), the XP45-12 provides a service life of up to 12 years in float operation.Is the battery VdS-certified?Yes, VdS approval with the number G115059 confirms its suitability for safety-critical applications such as fire and burglar alarm systems.What temperatures can the XP45-12 battery withstand?The XP45-12 battery is designed for discharging at -15 °C to +50 °C and charging at -10 °C to +50 °C.How high is the self-discharge rate?At 25 °C, self-discharge is less than 3 % per month; recharging is recommended after no more than 6 months.Which charging parameters apply?For standby operation: 13.50 – 13.80 V.For cyclic operation: 14.50 – 14.90 V.Temperature compensation: –18 mV/°C (float), –30 mV/°C (cycle).Max. charging current: 13.5 A.What is the cycle life of the XP45-12 battery?The XP45-12 battery can withstand up to 400 charge cycles at a depth of discharge of 50 %. 

The XCELL XP65-12 is a high-performance lead-acid battery with a nominal voltage of 12 volts and a capacity of 65 Ah (20h rate), ideal for safety-critical applications and demanding industrial environments. Equipped with M6 inlay terminals and tested according to VdS G118049, it impresses with high discharge currents, long service life and reliable performance even under difficult environmental conditions.Highlights at a glanceCertified: VdS G118049 – suitable for safety-relevant systemsHigh capacity: 65 Ah at 20h discharge, 37.7 Ah at 1h loadHigh performance: Discharge current up to 780 A for 5 secondsDurable: Up to 10 years float life at 20 °CMaintenance-free: AGM technology with leak-proof designPowerful performance for industrial and safety-critical applicationsThanks to its reliable AGM technology and high current output, the XP65-12 is ideal for fire and intrusion alarm systems, emergency power systems, telecommunications, medical technology and many other industrial applications. The M6 terminals ensure a secure connection, even under heavy load. With its compact dimensions (348 × 167 × 178 mm), it offers high energy density and can be easily integrated into existing systems.Efficiency and service life at a high levelIn float operation, the battery has a service life of up to 10 years at 20 °C. The charging voltage is 13.5 – 13.8 V in standby mode and 14.4 – 15.0 V in cyclic operation. The maximum charging capacity is 19.5 A. Thanks to the temperature-compensated charging curve, safe and efficient power absorption is guaranteed even with temperature fluctuations. The low self-discharge enables storage times of up to 6 months without recharging at 25 °C.Technology for maximum reliabilityThe standard ABS case is robust and can optionally be made flame-retardant (UL94-V0). A low internal resistance of approx. 7.3 mΩ ensures low losses and high system efficiency. The battery retains 86% of its performance even at 0 °C and still 65% at –15 °C. The product meets international quality standards such as ISO 9001 and CE.Features  ModelXCELL XP65-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)65 (at 20h rate) Maximum discharge current650A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)approx. 21.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP65-12 lead-acid batteryHow long is the service life of the battery?In standby mode, the service life is up to 10 years under optimum conditions (20 °C ambient temperature).For which applications is the battery suitable?The XP65-12 is ideally suited for safety-relevant systems, such as fire and intrusion alarm systems, UPS units, medical technology and industrial energy storage solutions.What temperatures can the battery withstand in use?The battery can be operated within a temperature range of –15 °C to +50 °C. For storage, a range of –15 °C to +40 °C applies.How high is the self-discharge of the XP65-12?At 25 °C, the self-discharge is less than 3 % per month. A top-up charge is recommended after six months at the latest.Which charging parameters must be observed?Standby operation: 13.5 – 13.8 VCyclic operation: 14.4 – 15.0 VMax. charging current: 19.5 ATemperature compensation: –20 mV/°C (float), –30 mV/°C (cycle)Are there any notes on storage and self-discharge?The battery can be stored for up to 6 months at 25 °C, after which a refresh charge is recommended. 

The XCELL XPL80-12 is a reliable and long-lasting AGM lead-acid battery. With a nominal voltage of 12 V and a capacity of 80 Ah, it is designed for a design life of up to 12 years thanks to its long-life technology. It is ideal for UPS systems, emergency power supplies, safety lighting, as well as demanding industrial applications. Its robust construction, maintenance-free VRLA technology and high power reserves make it a safe and long-lasting energy source.Highlights at a glanceLong-lasting: Design life of 10 to 12 yearsHigh capacity: 80 Ah at 12 V for reliable power supplyMaintenance-free: AGM technology with valve-regulated closureReliable: Low self-discharge, easy chargingCompact: Space-saving with M6 terminals for flexible integrationPowerful performance for critical applicationsThe XPL80-12 is specially designed for use in safety-critical energy systems. Whether in UPS systems, emergency power systems or safety lighting, the battery always delivers stable performance. Its robust construction also ensures reliable power supply in industrial environments, even under high loads.Efficient energy and long service lifeWith a design life of up to 12 years, the XPL80-12 belongs to the long-life range from XCELL. The AGM technology ensures a sealed, maintenance-free design, while the low self-discharge guarantees reliable readiness for use even after long periods of storage. As the battery is not classified as hazardous goods, transportation is simple and safe.Characteristics  ModelXCELL XPL80-12 Battery typeVRLA AGM (Long Life / Standby) Nominal voltage (V)12 Capacity (Ah)80 (at 20h rate) Maximum discharge current800A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life10-12 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)260 x 168 x 214 Weight (kg)approx. 24.5 ConnectionM6 screw terminal CertificationsISO9001, CE, UL  FAQs about the XCELL XPL80-12 Long Life batteryHow long is the service life of the XPL80-12?The battery is designed for a design life of 10 to 12 years and is therefore suitable for long-term standby operation.For which applications is the battery particularly suitable?The XPL80-12 is ideal for UPS systems, emergency power systems, safety lighting, as well as for industrial applications requiring high reliability.Does the battery need to be serviced regularly?No, the XPL80-12 is completely maintenance-free thanks to AGM VRLA technology.Is the battery easy to transport?Yes, the battery is not classified as hazardous goods and can therefore be transported without problems.What is the nominal voltage and capacity of the XCell XPL8012?The battery has a nominal voltage of 12 V and a capacity of 80 Ah (C10 rate).