XCELL XP7-12F2 lead-acid battery with 7 Ah and 12 V

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and a capacity of 12 Ah. With 6.3 mm Faston plug-in terminals, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems, and medical and industrial equipment. Its leak-proof AGM technology ensures a maintenance-free and long-lasting power supply.Highlights at a glanceVdS approved: G 120034 for safety-related applicationsCompact design: Measuring just 151 x 98 x 95 mm and weighing approx. 4.1 kgReliable performance: 12 Ah capacity at a 20-hour discharge rateHigh discharge current: Up to 180 A (5 sec.) for peak loadsLong-lasting: Up to 5 years’ service life at 25 °C in standby modePowerful performance for demanding applicationsThanks to its robust construction and consistent current output, the XP12-12F2 is suitable for a wide range of applications: from safety-critical systems and telecommunications to medical equipment. The Faston connectors (6.3 mm) enable seamless integration into existing setups. Even during short-term load peaks, the battery reliably delivers power with a discharge current of up to 180 A for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float life of up to 5 years (at 25 °C), the battery is characterised by low self-discharge of less than 3% per month, meaning it is ready for immediate use even after prolonged storage. It also impresses with good performance at extreme temperatures ranging from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (in accordance with UL94-HB/UL94-V0) and complies with international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage is 2.25 – 2.30 V/cell (equivalent to 13.5 – 13.8 V) in standby mode and 2.45 – 2.50 V/cell (equivalent to 14.7 – 15.0 V) in cycle mode at an ambient temperature of 25 °C. Automatic temperature compensation of –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby mode?Under ideal conditions (25 °C ambient temperature), the expected service life in standby mode is up to 5 years.Is the battery VdS-certified?Yes, the battery has VdS approval with the number G120034 and is therefore suitable for safety-critical applications.What temperature range is the battery suitable for?The battery is designed for a charging range of –15 °C to +50 °C and a discharging range of –20 °C to +60 °C.What is the self-discharge rate?At 25 °C, the battery’s self-discharge rate is less than 3 % per month. It is recommended that the battery be recharged if it has been stored for longer than six months.What charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cyclic operation, it should be 14.7–15.0 V. The temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cyclic operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard warning systems, as well as for hobby and camping use. However, it is not suitable for starting or traction applications.

The XCELL XP2.3-12 is a slim 12-volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides a reliable power supply for safety-critical and industrial applications and, with VdS G 115071 certification, meets the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS approved: G 115071 for safety-related applicationsPower reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm, weighing approx. 0.9 kgMaintenance-free: Valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security technology, emergency lighting, fire alarm systems, communication and measuring equipment, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) ensures a stable power supply, even during brief load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C is recommended, with temperature compensation of minus 18 mV per °C. In cyclic operation, the final charging voltages range from 14.50 to 14.90 V at 25 °C, with compensation of minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, from minus 10 °C to plus 50 °C during charging, and from minus 20 °C to plus 50 °C for storage.Dimensions and connectionsThe T1 copper flat plug connectors enable quick integration into existing systems. Thanks to its compact, elongated design, the battery fits particularly well in narrow enclosures and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20-hour rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4,8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP2.3-12What is the expected service life of the XP2.3-12 in standby mode?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years of float operation. Regular testing cycles and the correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety systems such as fire alarm and intruder alarm systems, emergency lighting, communication and measuring equipment, as well as control systems with a 12-volt supply.What charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please note the relevant temperature compensation.What is the self-discharge rate?At 25 °C, approximately 91 per cent of capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.What connections are available on the XP2.3-12?The XP2.3-12 features T1 copper flat plug connectors for quick and secure installation. 

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. Featuring maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclic use, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for a long-lasting power supply.VdS approved: G 189170 for safety-related applicationsMaintenance-free: Leak-proof AGM technology with > 99% gas recombination.High current-carrying capacity: Up to 360 A discharge current for 1 second.Flexible installation: Operation in all positions (except permanently upside down).Long-lasting: EUROBAT class “Standard Commercial” with a service life of up to 5 years.High performance for safety-critical applicationsThe NP12-12 delivers 12 Ah during a 20-hour discharge (down to 1.75 V/cell) and 11.1 Ah during a 10-hour discharge (down to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited to short-term power peaks.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, the NP12-12 is completely maintenance-free and leak-proof. The battery features self-closing low-pressure relief valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ in accordance with EN IEC 60896-21, and the short-circuit current is 320 A. The low self-discharge rate of approx. 3% per month allows for long-term storage whilst maintaining a high state of readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa NP12-12 lead-acid batteryWhat applications is the NP12-12 suitable for?The battery is ideal for:VdS-compliant fire and intruder alarm systemsUninterruptible power supplies (UPS)Emergency lightingTelecommunicationsControl and regulation technologyMedical technology devicesIs the battery maintenance-free?Yes, thanks to AGM technology, the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all positions, with the exception of a permanently upside-down mounted position.Which charging parameters (float vs cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charging limit: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarging: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3% per month at 20 °C

The XCELL XP26-12 is a powerful, maintenance-free 12-volt lead-acid battery with a capacity of 26 Ah (20-hour rate), characterised by its long service life. It has been specially developed for reliable, safety-critical and industrial applications. Thanks to its robust AGM technology and M5 inlay terminals, it delivers a high current output. The battery is also VdS-certified (G115073).Highlights at a glanceVdS approved: G 115073 for safety-related applicationsPowerful performance: 26 Ah capacity at a 20-hour discharge rateHigh current output: Up to 390 A discharge current (5 seconds)Long-lasting: Up to 5 years’ service life in standby mode at 25 °CMaintenance-free: Leak-proof AGM technology (VRLA)Powerful performance for demanding applicationsThe XP26-12 ensures a constant and reliable power supply, even during short-term load peaks, with a discharge current of up to 390 A for 5 seconds. With its compact dimensions (165 × 176 × 127 mm) and low weight of approx. 7.9 kg, it is ideal for mobile devices, emergency power supply systems, telecommunications, safety lighting and other industrial applications.Efficient and long-lasting power supplyAGM technology ensures maintenance-free operation with minimal self-discharge of less than 3% per month at 25 °C. A voltage of 13.60–13.80 V is recommended for continuous operation (float charging), whilst 14.50–14.90 V is ideal for cyclic operation. Integrated temperature compensation ensures the efficiency of the charging power regardless of the ambient temperature. The maximum charging power is 7.8 A.Technology for reliable safetyThe battery is fitted with a flame-retardant casing in accordance with UL94-HB/V0 and complies with international standards such as CE, UL and ISO 9001. The design allows for safe operation over several years in standby mode, provided proper maintenance is carried out and ambient temperature conditions are met. Even under difficult conditions, the battery maintains a stable capacity output, approximately 85% at 0 °C and 65% at –15 °C.Features  ModelXCELL XP26-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)26 (at a 20-hour rate) Maximum discharge current390A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP26-12What is the service life of the XCELL XP26-12 battery?Depending on operating conditions, the float service life is 3 to 5 years at an ambient temperature of 25 °C.What is the XCELL XP26-12 suitable for?The battery is suitable for safety-critical systems (e.g. fire and burglar alarm systems), UPS systems, telecommunications equipment, medical technology and other industrial applications.Is the XCELL XP26-12 battery VdS-certified?Yes, the XCELL XP26-12 holds VdS approval with the number G115073.What is the self-discharge rate?Self-discharge is less than 3% per month at 25 °C.What charging parameters should be observed?A voltage of 13.60 to 13.80 V is recommended for standby operation. In cyclic operation, the voltage is 14.50 to 14.90 V. The maximum charging current should not exceed 7.8 A.Is the battery maintenance-free, leak-proof and usable in any position?Yes, the XP 26‑12 VDS is maintenance-free, sealed, leak-proof and can be operated in any position. 

The Yuasa NP24-12I VdS is an industrial, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 V and a capacity of 24 Ah. With leak-proof AGM technology, high current-carrying capacity and VdS approval, this maintenance-free battery is a reliable power source for safety-critical applications such as fire alarm systems, UPS systems or telecommunications systems.Highlights at a glanceReliable capacity: 24 Ah (20h) / 22.3 Ah (10h) at 12 V for a constant power supplyVdS approved: G 182026 for safety-related applicationsHigh peak load: Maximum discharge current up to 500 A for 1 secondMaintenance-free: AGM technology with > 99% gas recombinationFlexible installation: Internal threaded or bolt connections (M5) with a tightening torque of 2.45 NmHigh-performance solution for critical systemsWith a nominal capacity of 24 Ah (20-hour discharge to 1.75 V/cell) and 22.3 Ah (10-hour discharge to 1.8 V/cell), the NP24-12I delivers a reliable and stable power supply – even during sudden load peaks of up to 500 A. Ideal for emergency power supplies, security technology and communication systems where reliability is of the utmost importance.Robust technology with high operational reliabilityThe maintenance-free AGM (Absorbent Glass Mat) technology completely binds the electrolyte within the separator, meaning there is no free electrolyte present. With gas recombination of over 99% and self-closing safety valves, the battery is safe in operation and requires no topping up. The low self-discharge rate of approx. 3% per month makes it particularly suitable for long-term storage. The housing, made of robust ABS plastic, complies with the UL94:HB standard; a flame-retardant version in accordance with UL94:V0 is available upon request.Features  ModelYuasa NP24-12I VdS Battery typeVRLA AGM (cycle-resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)24 (at a 20-hour rate) Maximum discharge current240A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)175 x 166 x 125 Weight (kg)8.6 ConnectionM5 thread CertificationsIEC 60896-21+22, UL, VdS  FAQs on the Yuasa 12V 24Ah lead-acid batteryWhat applications is the NP24-12I suitable for?It is ideal for fire alarm systems, UPS systems, emergency lighting, telecommunications, security technology and PV backup systems.What is the typical service life in standby mode?The NP24-12I offers a service life of up to 5 years at 20 °C and is classified as ‘Standard Commercial’ according to EUROBAT.What type of connection is used?Internal threads or bolt connections (M5) with a tightening torque of 2.45 Nm ensure a secure and vibration-resistant connection.Is the battery truly maintenance-free and leak-proof?Yes. VRLA technology with gas recombination and valve-regulated design. Each cell has a low-pressure valve. yuasa.deIn what orientation may the NP24-12I be mounted?Installation and operation are possible at angles of up to 90 degrees from the upright position. Permanent overhead installation is not intended.What charging voltages must be observed and what is the maximum permissible charging current?Float charge at 20 °C 13.65 V per block. Cyclic charging at 20 °C 14.5 V per block. Temperature compensation float approx. −3 mV per cell and °C, cyclic approx. −4 mV per cell and °C. Cyclic charging current up to 6 A.Can the battery be operated in a sealed enclosure?No, VRLA batteries can release hydrogen gas. Installation in airtight enclosures is not permitted and adequate ventilation must always be ensured.