Deye GE-F60 – State-of-the-art energy storage solution for domestic and commercial applications
Product information
Deye’s GE-F60 series represents the next generation of intelligent high-voltage energy storage systems. It combines high-performance lithium iron phosphate (LiFePO4) technology with an integrated energy management system, thereby offering a reliable, safe and scalable solution for energy storage, for both domestic and industrial use.
Highlights at a glance
- Capable of black start & suitable for off-grid use: Automatic restart in the event of a power cut
- High efficiency and service life: Over 6,000 charge cycles with minimal capacity loss
- Scalable up to 600 kWh & 500 kW: Flexible expansion to meet growing requirements
- IP55-certified: Dust- and splash-proof for a wide range of locations
Safety & security of the highest standard
The GE-F60 sets new standards in terms of safety:
- Active gas, smoke and temperature monitoring
- Aerosol fire-extinguishing system in the module & complete system
- Redundant power supply for maximum reliability
- Intelligent cell balancing and automatic fault detection
Scalable for any application
The basic system comprises 12 modules, each with a capacity of 5.12 kWh, resulting in a total capacity of 61.44 kWh (55.29 kWh usable). Depending on the application, the battery capacity can be expanded to up to 360 kWh. Up to 10 systems can be connected in parallel via the AC side, making them well-suited for large commercial or industrial projects.
Who is the Deye GE-F60 suitable for?
- Private households seeking maximum energy independence
- SMEs & industrial facilities requiring a stable power supply and peak load management
- Emergency power systems that must be fail-safe and capable of black start
- PV projects with high output and storage requirements
- Off-grid systems, e.g. for remote buildings or isolated grids
FAQs on the Deye GE-F60 energy storage solution
How much energy is available when the unit is fully loaded?
A tower comprising 12 modules delivers 61.44 kWh gross. With a depth of discharge of 90 %, approximately 55.29 kWh of this is usable.
What voltages and currents apply?
The nominal system voltage is 614 V. The operating range is from 480 to 700 V. The continuous discharge current is specified as 100 A; up to 125 A is possible for short periods.
To what extent can the system be scaled?
For larger commercial or industrial applications, up to six GE-F60 units can be operated in parallel. This enables total capacities of up to 360 kWh to be achieved.
Which inverters is the system compatible with?
The GE-F60 is fully pre-configured for hybrid inverters in the SUN-29.9K/30K/35K-SG01HP3-EU-BM3 and SUN-40K/50K-SG01HP3-EU-BM4 series. The appropriate CAN profile (code 00) is already pre-programmed at the factory; manual configuration is not required. It is strongly recommended that you check the compatibility list, as the manufacturer may make changes.
What safety features are built in?
The safety concept includes gas and smoke detection, active pressure relief, an integrated aerosol extinguishing cartridge and an automatic shut-off within three seconds. These measures specifically address common concerns regarding installation indoors or in the cellar.
| Battery technology: | LiFePO4 |
|---|---|
| Certifications: | CE / IEC 62619 / IEC 62040 / UN 38.3 |
| Charge/discharge current (rated value): | 100 A / 100 A |
| Communication: | CAN2.0/RS485 |
| Cycle life: | ≥ 6,000 cycles (at 25 ± 2 °C, 70% EOL) |
| Dimensions (W x D x H): | 780 x 1056 x 2235 mm |
| Maximum discharge current: | 125 A (peak for 2 minutes at 25 °C) |
| Operating temperature (charging): | 0 °C to +55 °C |
| Operating temperature (discharge): | -20 °C to +55 °C |
| Operating voltage range : | 480 ~ 700 V |
| Permissible humidity: | 5% – 85% RH |
| Protection class: | IP55 |
| System capacity (rated value): | 61.44 kWh |
| System nominal voltage : | 51.2 V |
| Usable capacity: | 55.29 kWh |
| Warranty: | 10 years |
| Weight: | approx. 1,200 kg |
Login