Vision lead-acid battery 6FM40X with 12V and 40Ah

The Vision CP1223 is a high-quality, valve-regulated lead acid battery (VRLA) with 12 volt nominal voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable energy provision for a wide variety of applications, particularly in security and medical technology.Highlights at a glanceCompact energy: 2.3 Ah capacity at 12 V for reliable energy provision in restricted spaces.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Offers a stable voltage position and low self-discharge.Flexible installation: Operation is possible in all positions except permanent upside-down use.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1223 delivers a nominal capacity of 2.3 Ah with a 20 hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its area of application ranges from alarm systems and UPS systems to mobile medical devices where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1223 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables long storage life with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1223 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (maintenance charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1223 lead-acid batteryFor which applications is the CP1223 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to refill with distilled water and it is protected against leaks.What is the service life of the CP1223?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A in order to maximise the battery’s service life.What does the Faston 187 connector mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free installation.

The Vision CP12170X is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 17 Ah capacity, specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life designed for up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or in alarm systems, the CP12170X fulfils the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 17 Ah at 12 V for a long-lasting power supply in the event of a mains failure.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational safety: Leak-proof design and a robust housing ensure safe operation.Low self-discharge: Enables long storage capability and ensures a high state of readiness.Flexible installation: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12170X delivers a capacity of 17 Ah on a 20-hour discharge. Its design is optimised for standby parallel operation, in which it is kept at a constant charging voltage so it can immediately provide full power in the event of a power failure. With its low internal resistance, the battery is able to supply high currents even for short periods, making it an ideal choice for demanding UPS systems and other safety-relevant systems.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass mat (AGM system), the CP12170X is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3 % per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 on request.Features  ModelVision CP12170X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)17 (at 20h rate) Maximum discharge current255A (for 5 seconds) Charge voltage (standby)13.5V - 13.8V Charge voltage (cycle use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12170X lead-acid batteryFor which applications is the CP12170X suitable?The battery is ideal for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devices What does the long service life of up to 10 years mean?The statement "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20 °C. The actual service life achieved depends greatly on the operating conditions such as ambient temperature, charging voltage, and frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12170X uses higher quality materials and a more robust grid construction than standard batteries. This leads to less corrosion and less wear during continuous charging, which enables the significantly longer service life in standby mode and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby mode, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is necessary and it can be safely operated in devices and indoors.Can the battery be flexibly installed?Yes, the battery can be operated in all positions, with the exception of a permanently upside-down position. This enables flexible installation in a wide variety of devices and systems.

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.

The Vision CP1270 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power for a wide range of applications, from emergency backup in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power in standard applications.Long service life: Designed for a lifespan of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits in most standard installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1270 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its areas of use range from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month enables long storage capability with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1270 lead-acid batteryFor which applications is the CP1270 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lighting. Please compare the voltage (12V), the capacity (7Ah), the dimensions and the connector type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20°C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise battery service life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables fast and tool-free installation.

The XCELL XP65-12 is a high-performance lead-acid battery with a nominal voltage of 12 volts and a capacity of 65 Ah (20h rate), ideal for safety-critical applications and demanding industrial environments. Equipped with M6 inlay terminals and tested according to VdS G118049, it impresses with high discharge currents, long service life and reliable performance even under difficult environmental conditions.Highlights at a glanceCertified: VdS G118049 – suitable for safety-relevant systemsHigh capacity: 65 Ah at 20h discharge, 37.7 Ah at 1h loadHigh performance: Discharge current up to 780 A for 5 secondsDurable: Up to 10 years float life at 20 °CMaintenance-free: AGM technology with leak-proof designPowerful performance for industrial and safety-critical applicationsThanks to its reliable AGM technology and high current output, the XP65-12 is ideal for fire and intrusion alarm systems, emergency power systems, telecommunications, medical technology and many other industrial applications. The M6 terminals ensure a secure connection, even under heavy load. With its compact dimensions (348 × 167 × 178 mm), it offers high energy density and can be easily integrated into existing systems.Efficiency and service life at a high levelIn float operation, the battery has a service life of up to 10 years at 20 °C. The charging voltage is 13.5 – 13.8 V in standby mode and 14.4 – 15.0 V in cyclic operation. The maximum charging capacity is 19.5 A. Thanks to the temperature-compensated charging curve, safe and efficient power absorption is guaranteed even with temperature fluctuations. The low self-discharge enables storage times of up to 6 months without recharging at 25 °C.Technology for maximum reliabilityThe standard ABS case is robust and can optionally be made flame-retardant (UL94-V0). A low internal resistance of approx. 7.3 mΩ ensures low losses and high system efficiency. The battery retains 86% of its performance even at 0 °C and still 65% at –15 °C. The product meets international quality standards such as ISO 9001 and CE.Features  ModelXCELL XP65-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)65 (at 20h rate) Maximum discharge current650A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)approx. 21.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP65-12 lead-acid batteryHow long is the service life of the battery?In standby mode, the service life is up to 10 years under optimum conditions (20 °C ambient temperature).For which applications is the battery suitable?The XP65-12 is ideally suited for safety-relevant systems, such as fire and intrusion alarm systems, UPS units, medical technology and industrial energy storage solutions.What temperatures can the battery withstand in use?The battery can be operated within a temperature range of –15 °C to +50 °C. For storage, a range of –15 °C to +40 °C applies.How high is the self-discharge of the XP65-12?At 25 °C, the self-discharge is less than 3 % per month. A top-up charge is recommended after six months at the latest.Which charging parameters must be observed?Standby operation: 13.5 – 13.8 VCyclic operation: 14.4 – 15.0 VMax. charging current: 19.5 ATemperature compensation: –20 mV/°C (float), –30 mV/°C (cycle)Are there any notes on storage and self-discharge?The battery can be stored for up to 6 months at 25 °C, after which a refresh charge is recommended.