Vision lead-acid battery CP12120F2 with 12V and 12Ah

The Vision CP1270 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power for a wide range of applications, from emergency backup in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power in standard applications.Long service life: Designed for a lifespan of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits in most standard installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1270 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its areas of use range from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month enables long storage capability with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1270 lead-acid batteryFor which applications is the CP1270 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lighting. Please compare the voltage (12V), the capacity (7Ah), the dimensions and the connector type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20°C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise battery service life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables fast and tool-free installation.

The Vision CP1270F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 volt nominal voltage and 7 Ah capacity. This highly versatile and reliable general purpose battery was designed for long life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery offers safe and reliable power for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power supply in standard applications.Long service life: Designed for a service life of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common mounting spaces for batteries of this performance class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices. Powerful performance for versatile applicationsThe Vision CP1270F2 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its range of application extends from alarm systems and small UPS systems to emergency lighting and medical technology, where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1270F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3% per month enables long storage with high readiness for use. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1270F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1270F2 lead-acid batteryFor which applications is the CP1270F2 suitable?The battery is ideally suited for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connections?The difference is in the width of the flat connector. The F2 connector, also known as Faston 250, is 6.35 mm wide, while the F1 connector (Faston 187) is only 4.8 mm wide. The wider F2 connector can transmit higher currents and is often used in more powerful UPS systems. Please check which connector type your device requires before purchasing.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270F2 is one of the most common replacement batteries. Please compare the voltage (12V), capacity (7Ah), dimensions and especially the connector type (Faston 6.35 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage of between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise the life of the battery.What is the service life of the CP1270F2?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.

The Vision CP1223 is a high-quality, valve-regulated lead acid battery (VRLA) with 12 volt nominal voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable energy provision for a wide variety of applications, particularly in security and medical technology.Highlights at a glanceCompact energy: 2.3 Ah capacity at 12 V for reliable energy provision in restricted spaces.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Offers a stable voltage position and low self-discharge.Flexible installation: Operation is possible in all positions except permanent upside-down use.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1223 delivers a nominal capacity of 2.3 Ah with a 20 hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its area of application ranges from alarm systems and UPS systems to mobile medical devices where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1223 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables long storage life with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1223 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (maintenance charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1223 lead-acid batteryFor which applications is the CP1223 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to refill with distilled water and it is protected against leaks.What is the service life of the CP1223?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A in order to maximise the battery’s service life.What does the Faston 187 connector mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free installation.

The Vision CP12170X is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 17 Ah capacity, specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life designed for up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or in alarm systems, the CP12170X fulfils the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 17 Ah at 12 V for a long-lasting power supply in the event of a mains failure.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational safety: Leak-proof design and a robust housing ensure safe operation.Low self-discharge: Enables long storage capability and ensures a high state of readiness.Flexible installation: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12170X delivers a capacity of 17 Ah on a 20-hour discharge. Its design is optimised for standby parallel operation, in which it is kept at a constant charging voltage so it can immediately provide full power in the event of a power failure. With its low internal resistance, the battery is able to supply high currents even for short periods, making it an ideal choice for demanding UPS systems and other safety-relevant systems.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass mat (AGM system), the CP12170X is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3 % per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 on request.Features  ModelVision CP12170X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)17 (at 20h rate) Maximum discharge current255A (for 5 seconds) Charge voltage (standby)13.5V - 13.8V Charge voltage (cycle use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12170X lead-acid batteryFor which applications is the CP12170X suitable?The battery is ideal for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devices What does the long service life of up to 10 years mean?The statement "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20 °C. The actual service life achieved depends greatly on the operating conditions such as ambient temperature, charging voltage, and frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12170X uses higher quality materials and a more robust grid construction than standard batteries. This leads to less corrosion and less wear during continuous charging, which enables the significantly longer service life in standby mode and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby mode, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is necessary and it can be safely operated in devices and indoors.Can the battery be flexibly installed?Yes, the battery can be operated in all positions, with the exception of a permanently upside-down position. This enables flexible installation in a wide variety of devices and systems.

The Varta Longlife Power 4906, internationally standardised as LR6 (AA/Mignon), is the powerful and versatile all-round battery for professional and industrial applications with high energy requirements. This powerful alkaline battery has been specially developed for devices that require a high and often fluctuating power output. The practical 4-pack foil packaging is optimised for professional use and facilitates handling and stocking in a commercial environment.Highlights at a glancePowerful energy: Developed for devices with high and fluctuating energy requirements.Professional reliability: Guarantees constant and long-lasting performance for commercially used devices.Optimised packaging: The 4-pack foil packaging is ideal for easy packaging and service requirements.Long shelf life: With 10 years of shelf life, perfect for stockpiling with minimal self-discharge.Guaranteed quality: Proven Varta product performance, made in Germany.Powerful in professional applicationsThe Varta Longlife Power LR6 is the ideal choice for a wide range of professional devices that require more than just standard power. It is used in medical technology (e.g. mobile ECG devices, infusion pumps), in security technology (wireless motion detectors, electronic locking systems), in industry (measuring devices, hand scanners) as well as in the event sector (wireless microphones, pocket transmitters). Its ability to deliver high power peaks ensures the reliable operation of sophisticated electronics.Reliable and powerful alkaline technologyThe proven alkaline-manganese technology (Zn/MnO2) of the Longlife Power series is designed for high power output. It offers superior performance in energy-intensive devices compared to standard alkaline batteries. The high-quality workmanship "Made in Germany" also ensures maximum leakage safety and protects your valuable professional equipment.Efficiency for professional useThe Varta Longlife Power series in foil packaging is consistently geared towards the needs of professional users. Delivery in foil-wrapped 4-packs makes stockholding easier and ensures needs-based distribution to service technicians or for equipping workstations. The guaranteed Varta quality and long shelf life offer maximum planning and supply security for your company. Battery features                                                                                                                                                          Model              Varta Longlife Power 4906 / AA (foil of 4)               Battery type              Alkaline manganese               Rated voltage (V)              1.5               Capacity (mAh)              approx. 2950               Diameter (mm)              14.5               Height (mm)              50.5               Weight per cell (g)              23.8        FAQs about the Varta Longlife Power LR6 batteryWhat is the difference between "Longlife Power" and "Industrial Pro"?Both lines are aimed at professional users. "Longlife Power" (formerly High Energy) is designed as a powerful all-rounder for devices with high, often fluctuating energy requirements (e.g. measuring devices, wireless microphones). "Industrial Pro" is designed for maximum reliability and a constant power output for OEM applications and safety-relevant devices (e.g. smoke detectors, long-term sensors).What are the advantages of the 4-pack foil packaging?The foil packaging (shrink wrap) joins four batteries into a compact and robust unit. This is ideal for supplying with new devices (OEM), for equipping service kits or for easy and quick distribution to employees without having to handle loose batteries.Is this battery suitable for initial equipment (OEM)?Yes, its high quality and long shelf life make it a very good choice for the initial equipment of devices that require a powerful energy source. For applications where guaranteed long-term stability is a priority, the "Industrial Pro" series is a possible alternative.Can I also use these batteries in devices with low power requirements?Yes, this is possible. However, for devices with very low and constant energy requirements (e.g. remote controls, wall clocks), the batteries of the "Varta Longlife" series are the most economical choice, as these are optimised for maximum lifespan at low load.How should this battery be disposed of?Batteries must not be disposed of with household waste. Please take used batteries to the designated collection points in retail outlets or municipal recycling centres to ensure environmentally friendly disposal.