Vision Lead-acid battery CP1290F2 with 12V and 9Ah

The Vision CP1270 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power for a wide range of applications, from emergency backup in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power in standard applications.Long service life: Designed for a lifespan of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits in most standard installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1270 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its areas of use range from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month enables long storage capability with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1270 lead-acid batteryFor which applications is the CP1270 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lighting. Please compare the voltage (12V), the capacity (7Ah), the dimensions and the connector type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20°C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise battery service life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables fast and tool-free installation.

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The VARTA CR2 is a high-performance 3-volt lithium primary battery specially developed for devices with high, short-term energy requirements such as cameras and flash units. Based on lithium manganese dioxide technology (Li-MnO2), it offers exceptionally high performance, extremely low self-discharge and a very wide operating temperature range. Supplied in a protective individual blister pack, it is the ideal energy source for demanding photography and other high-tech applications.Highlights at a GlanceHigh Performance: Developed for high-tech devices with high and fast energy demand (high drain).Quick Flash Readiness: Quickly delivers high currents for rapid charging of photo flashes.Extreme Longevity: Up to 10 years of shelf life thanks to extremely low self-discharge.Wide Temperature Range: Reliable performance under extreme conditions from -20 °C to +70 °C.Safe Packaging: The protective blister guarantees freshness and performance until use.Reliable Power for Photography and High-Tech DevicesThe VARTA CR2 is the preferred power source for a wide range of devices where high performance and absolute reliability are essential. Its main area of application is analogue and digital photography to power cameras and external flashes. It is also ideal for use in high-intensity LED torches, lasers, smart home sensors, and security technology.Superior Lithium Manganese Dioxide TechnologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts and can deliver very high currents very quickly. This shortens the charging time between two flashes and ensures consistent performance during continuous shooting. The extremely low self-discharge guarantees maximum readiness for use even after many years of storage.Developed for Maximum ReliabilityThe CR2 is manufactured to the highest quality standards to ensure maximum reliability and leak-proof protection. This protects your valuable and often sensitive equipment from damage. The protective individual blister pack ensures that the battery retains its full performance until used and can be safely stored protected from short-circuit and external influences. Characteristics                                                                                                                                                          Model              VARTA Lithium photo battery CR2 (individual blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Rated voltage (V)              3.0               Capacity (mAh)              880               Diameter (mm)              15.6               Height (mm)              27.0               Weight (g)              11.0        FAQs about the VARTA Lithium Battery CR2What is the main advantage of this lithium battery?The crucial advantage is its ability to deliver very high currents quickly (high drain), making it ideal for photographic flashes and other high-power applications. This is combined with an extremely long shelf life and a wide temperature range.Is this battery rechargeable?No. This is a lithium primary battery. It must not under any circumstances be attempted to recharge it. Confusion with similar-looking rechargeable lithium-ion batteries (e.g. RCR2) is dangerous and can lead to fire or explosion.Why is it called a "photobattery"?One of the main areas of application for this battery type is to power cameras and flashes. The high voltage and the ability to provide power quickly are perfectly matched to the requirements of photography.How should this battery be disposed of?Batteries may not be disposed of in household waste. Please take the empty battery to the designated collection points in retail or municipal recycling centres to ensure environmentally friendly recycling. 

The Yuasa NP1.2-6 is a particularly compact, valve-regulated lead-acid battery (VRLA) with 6 volts and 1.1 Ah capacity. It is ideal for devices with low energy requirements where a constant, reliable power supply is needed, for example in safety and measuring systems. The battery is maintenance-free, robust and designed for a long service life.Highlights at a glanceCompact capacity: 1.1 Ah at 6 V – ideal for energy-saving systems.Minimal space requirement: Only 97 × 25 × 54.5 mm – fits into the smallest installation spaces.Flexible installation: Operation possible in all positions, except permanently upside down.Maintenance-free: VRLA technology with integrated low-pressure exhaust valves.Long-lasting: EUROBAT class “Standard Commercial” – up to 5 years in use.Safe design: Robust ABS housing, optionally flame-retardant.Small battery, great reliabilityWith its capacity of 1.1 Ah at a 10-hour discharge up to 1.8 V/cell (at 20 °C), the NP1.2-6 provides a stable power supply for applications with low current requirements. The high discharge current of up to 36 A for 1 second also makes the battery suitable for short-term power peaks.Robust technology with a long service lifeThe NP1.2-6 is maintenance-free and designed for durability. It complies with the EUROBAT classification “Standard Commercial” with a service life of up to 5 years at 20 °C. The low self-discharge rate of approx. 3 % per month guarantees high operational readiness, even with longer storage. The housing is made of impact-resistant ABS (UL94:HB), with an optionally available flame-retardant version to UL94:V0. The battery also meets the requirements of ISO 9001.Easy integration and safe handlingThanks to its compact dimensions, the NP1.2-6 can be flexibly integrated into existing systems. Installation is possible in almost any position as long as it is not operated permanently upside down. The Faston plug connections (4.75 mm) enable quick and secure connection. Each cell has a low-pressure exhaust valve that opens when necessary and then automatically closes again for safe, low-maintenance operation. For floating charge there is no limit to the charging current, for cyclic operation the recommended limit is 0.3 A.Features ModelYuasa NP1.2-6 Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)6 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current12A (for 5 seconds) Charging voltage (float charge)6.825V (±1%) Charging voltage (cyclic operation)7.275V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)97 x 24 x 57 Weight (kg)0.3 ConnectionFaston 4.8mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa lead-acid battery with 6V and 1.1AhCan the battery be installed flexibly?Yes, it can be used in all positions, with the exception of a permanently upside-down mounted position.What is the NP 1.2-6 suitable for?The Yuasa NP 1.2/6 is a maintenance-free 6 V / 1.2 Ah VRLA lead-acid battery with AGM technology (cross-linked glass fibre mat), which has been specially developed for standby applications such as UPS systems, alarm technology, emergency lighting or telecommunications. The design is leak-proof and long-lasting.How long does the lead-acid battery last and how many charging cycles are possible?The battery has a design life of 3 to 5 years in float or standby operation (EUROBAT class “Standard Commercial”). Over 1,000 charge cycles are possible in cyclic use (depending on depth of discharge and operating conditions).How high is the self-discharge rate and what should be considered during storage?Monthly self-discharge: approx. 3 % at 20 °CStorage capability: can be stored for up to 12 months at room temperature (if regularly recharged)Recommended storage range: –20 °C to +60 °C (fully charged)How high are the load capacity and short-circuit resistance?Maximum discharge current (1 second): 36 A1-minute current: approx. 12 AInternal impedance: approx. 60 mΩ at 1 kHzGood recovery even after deep discharge thanks to lead-calcium grid 

The VARTA CR123A is a high-performance 3-volt lithium primary battery developed for professional and demanding applications with very high energy requirements. Based on lithium manganese dioxide technology (Li-MnO2), it offers exceptionally high performance, extremely low self-discharge and a very wide operating temperature range. Supplied in a protective individual blister, it is the ideal power source for digital cameras, smart home devices and LED torches.Highlights at a glanceMaximum performance: Developed for high-tech devices with high and fast energy needs (high drain).Extreme longevity: Up to 10 years storage life thanks to extremely low self-discharge.Wide temperature range: Reliable performance under extreme conditions from -20 °C to +70 °C.Versatile application: Ideal for photography, smart home, security technology and outdoor activities.Safe packaging: The protective blister ensures freshness and performance until use.Reliable energy for high-tech applicationsThe VARTA CR123A is the preferred power source for a wide range of devices in which high output and absolute reliability are crucial. Its main field of application is in security technology (motion detectors, alarm systems), in smart home devices, in professional photography (flash units, cameras) and in high-intensity LED torches. Its ability to deliver high currents very quickly guarantees the flawless functioning of all demanding devices.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to this cell’s exceptional performance. It enables a high nominal voltage of 3 volts and is able to supply high currents very quickly, which is essential for devices such as photo flashes. The extremely low self-discharge of less than 1% per year at room temperature guarantees maximum readiness even after many years of storage in “fit and forget” applications such as sensors.Developed for maximum reliabilityThe CR123A is made to the highest quality standards to ensure maximum reliability and leak resistance. This protects your valuable electronic devices from damage. The protective individual blister ensures that the battery retains its full performance until it is used and can be stored safely protected from short circuits and external influences. Features                                                                                                                                                        Model              VARTA Lithium Photo Battery CR123A (Individual Blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3.0               Capacity (mAh)              1480               Diameter (mm)              17.0               Height (mm)              34.5               Weight (g)              17.0        FAQs about the VARTA Lithium Battery CR123AWhat is the main advantage of this lithium battery?The decisive advantage is its ability to deliver very high currents quickly (high drain), combined with extremely long storage capabilities and a wide temperature range. It is the perfect choice for energy-intensive devices that must work for long periods without maintenance.Is this battery rechargeable?No. This is a lithium primary battery. It must not be recharged under any circumstances. Confusion with similarly looking rechargeable lithium-ion batteries (e.g. RCR123A) is dangerous and may result in fire or explosion.Why is it called a "photo battery"?Historically, one of the first main applications for this type of battery was to power analogue and early digital cameras as well as their flash units. Owing to its high output, it is still widely used today in professional photography and for high-performance LED torches.Can I use this instead of two AA batteries?No, the CR123A has a voltage of 3 volts, while two AA batteries in series also deliver 3 volts. However, the form factor is completely different. It is not intended as a direct replacement for AA batteries and only fits devices specifically designed for the CR123A type.How should this battery be disposed of?Batteries must not be disposed of in household waste. Please take the empty battery to the designated collection points in stores or to municipal recycling centres to ensure environmentally sound recycling.

The VARTA CR2025 is a high-quality 3-volt lithium button cell and is one of the most widely used battery types for a variety of electronic devices. Based on proven lithium manganese dioxide technology (Li-MnO2), it provides a reliable and long-lasting energy supply. Supplied in a protective individual blister, it is the ideal choice for remote controls, medical devices, fitness trackers, and many other everyday devices.Highlights at a glanceReliable performance: Constant energy output for flawless operation of your electronic devices.Universally usable: One of the most common button cells for a wide range of applications.Long shelf life: With up to 10 years of shelf life, extremely durable and always ready for use.Wide temperature range: Works reliably even under demanding thermal conditions from -20 °C to +70 °C.Secure packaging: The child-resistant individual blister guarantees freshness and protects the cell until use.Reliable energy for compact electronicsThe VARTA CR2025 is the preferred power source for numerous everyday and professional devices where compact size and reliability are crucial. Its main area of use is in remote controls, medical devices (e.g. blood glucose meters), fitness sensors (e.g. heart rate belts), scales and as a backup battery for storing settings (CMOS) in computers and industrial systems.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) enables a high nominal voltage of 3 volts in a single, flat cell. It is characterized by extremely low self-discharge, which ensures the long shelf life of up to 10 years. This technology guarantees stable performance over most of the battery's lifespan and excellent performance even at fluctuating temperatures.Developed for maximum reliability and safetyThe CR2025 is produced to the highest quality standards to ensure maximum reliability and leak-proofing. This protects your valuable electronic devices from damage. The protective and child-resistant individual blister ensures that the battery retains its full performance until use and can be safely stored protected from short circuit and external influences. Characteristics                                                                                                                                                        Model              VARTA lithium button cell CR2025 (individual blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3.0               Capacity (mAh)              170               Diameter (mm)              20.0               Height (mm)              2.5               Weight (g)              2.5        FAQs about the VARTA Lithium Battery CR2025What does the designation CR2025 mean?The designation gives information about the properties and the size of the cell. "C" stands for lithium chemistry, "R" for the round shape. The numbers "2025" denote the dimensions: 20.0 mm in diameter and 2.5 mm in height.Is this battery rechargeable?No. This is a primary lithium battery. Under no circumstances should it be attempted to recharge it. Charging attempts are extremely dangerous and may result in fire or explosion.What is the advantage over alkaline or silver oxide button cells?The main advantage is the high voltage of 3 volts in a single cell, while alkaline and silver oxide cells provide only 1.5 or 1.55 volts. In addition, lithium cells offer a significantly longer shelf life and a wider temperature range.How must this battery be disposed of?Batteries must not be disposed of in household waste. Please dispose of the empty battery at the designated collection points in stores or municipal recycling centres for environmentally friendly disposal.