CP (standard)

The Vision CP672 is a high-quality, valve-regulated lead-acid (VRLA) battery with 6 Volt nominal voltage and 7.2 Ah capacity. This highly versatile and reliable general-purpose battery is designed for a long service life in standby operation as well as for light cyclical demands. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power supply for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a glanceHigh capacity: 7.2 Ah at 6 V for a long-lasting power supply in compact applications.Long service life: Designed for a service life of up to 5 years in standby operation (Float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured according to the highest quality standards for consistently high reliability.Powerful performance for versatile applicationsThe Vision CP672 provides a nominal capacity of 7.2 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation but is also suitable for applications with occasional charge and discharge cycles. Its scope of application ranges from security lighting and alarm systems to leisure applications where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP672 is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 on request.Features  ModelVision CP672 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)7.2 (at 20h rate) Maximum discharge current108A (for 5 seconds) Charging voltage (float charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 34 x 100 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP672 lead-acid batteryFor which applications is the CP672 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Safety lighting and emergency lighting systemsSecurity and alarm technologyAutomatic feeders and agricultural equipmentElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP672 batteries in series to obtain a voltage of 12 V. This is common practice to operate 12V devices. Please always make sure to use two identical batteries (same model, same age) and to connect them correctly.What is the service life of the CP672?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 6.75 V and 6.9 V.Cyclic charge: For occasional cyclical charging, a voltage between 7.2 V and 7.5 V is recommended.Maximum charge current: Charge current should not exceed 2.16 A to maximise battery life.What does the Faston 187 terminal type mean?Faston 187 refers to the type of terminal. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply pushed onto these contacts, allowing quick and tool-free installation. 

The Vision CP6120F1 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 6 volts and 12 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for prolonged service life in standby operation as well as for light cyclical requirements. Equipped with maintenance-free AGM technology, this battery delivers safe and consistent power for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a glanceHigh capacity: 12 Ah at 6 V for long-lasting power in compact applications.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common installation spaces for batteries in this performance class.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Tested quality: Manufactured according to the highest quality standards for consistently high reliability.Strong performance for versatile applicationsThe Vision CP6120F1 delivers a nominal capacity of 12 Ah on a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application extends from safety lighting and alarm systems to leisure applications requiring constant and fail-safe power supply.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely contained within a fibreglass mat, the CP6120F1 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3% per month allows long storage with high operational readiness. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Characteristics  ModelVision CP6120F1 Battery typeVRLA AGM (standby / all-purpose) Nominal voltage (V)6 Capacity (Ah)12 (at 20h rate) Maximum discharge current130A (for 5 seconds) Charging voltage (trickle charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 50 x 100 Weight (kg)approx. 1.8 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP6120F1 lead-acid batteryWhich applications is the CP6120F1 suitable for?The battery is ideal for a wide range of standby and light cyclical applications:Safety lighting and emergency lighting systemsSafety and alarm technologyAutomatic feeders and agricultural equipmentElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP6120F1 batteries in series to achieve a voltage of 12 V. This is common practice for operating 12V devices. Please ensure that you always use two identical batteries (same model, same age) and connect them correctly.What is the service life of the CP6120F1?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 6.75 V and 6.9 V.Cycle charge: For occasional cyclical charging a voltage between 7.2 V and 7.5 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to maximise the life of the battery.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free assembly. 

The Vision CP6120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 6 Volt nominal voltage and 12 Ah capacity. This highly versatile and reliable multi-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm connectors, this battery provides safe and consistent power supply for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a GlanceHigh capacity: 12 Ah at 6 V for long-lasting power in compact applications.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Completely sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits into the most common installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards for consistently high reliability. Strong Performance for Versatile ApplicationsThe Vision CP6120F2 delivers a nominal capacity of 12 Ah for a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is also suitable for applications with occasional charge-discharge cycles. Its fields of application range from emergency lighting and alarm systems to leisure applications where a constant and fail-safe power supply is essential.Robust Technology for Demanding EnvironmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP6120F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month ensures long shelf life and high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features  ModelVision CP6120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)12 (at 20h rate) Maximum discharge current130A (for 5 seconds) Charging voltage (float charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 50 x 100 Weight (kg)approx. 1.8 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP6120F2 Lead-Acid BatteryWhat applications is the CP6120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Emergency lighting and emergency lighting systemsSecurity and alarm technologyAutomatic feeders and agricultural devicesElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP6120F2 batteries in series to obtain a voltage of 12 V. This is a common practice to operate 12 V devices. Please always ensure that you use two identical batteries (same model, same age) and connect them correctly.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connectors?The difference is in the width of the flat connector. The F2 connector, also called Faston 250, is 6.35 mm wide, while the F1 connector (Faston 187) is only 4.8 mm wide. The wider F2 connector can transmit higher currents better. Please check which connector type your device needs before purchasing.What charging parameters apply to this battery?Trickle charge (float): The recommended voltage is between 6.75 V and 6.9 V at 20 °C.Cyclic charge: For occasional cyclic charging, a voltage between 7.2 V and 7.5 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to maximise the service life of the battery.What is the service life of the CP6120F2?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial". 

The Vision CP1229 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 2.9 Ah. This compact and reliable all-purpose battery is designed for long-term service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable power supply for a wide variety of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact energy: 2.9 Ah capacity at 12 V for reliable power supply with low space requirements.Long service life: Designed for a service life of up to 5 years in standby use (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Provides a stable voltage level and low self-discharge.Flexible installation: Operation is possible in all positions except for permanent overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devicesPowerful performance for versatile applicationsThe Vision CP1229 delivers a nominal capacity of 2.9 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application ranges from alarm systems and UPS systems to mobile medical devices where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1229 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of under 3% per month allows for long storage periods with high readiness. The sturdy ABS plastic housing offers excellent protection against shocks and vibrations.Properties  ModelVision CP1229 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.9 (at 20h rate) Maximum discharge current43.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)79 x 56 x 105 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1229 lead-acid batteryFor which applications is the CP1229 suitable?The battery is ideal for a wide range of standby and light cyclical applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. It does not require topping up with distilled water and is protected against leakage.What is the service life of the CP1229?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1229 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.9Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycling charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.87 A in order to maximise battery life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables quick and tool-free installation. 

The Vision CP1223 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery delivers a safe and consistent power supply for a wide range of applications, particularly in security and medical technology.Highlights at a glanceCompact power: 2.3 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104099 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1223 provides a rated capacity of 2.3 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM System (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1223 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features  ModelVision CP1223 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4,8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1223 lead-acid batteryWhat applications is the CP1223 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1223?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A to maximise the battery's service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connector. These are flat-pin connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick, tool-free installation.

The Vision CP1232 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 3.2 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, particularly in security and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact power: 3.2 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104100 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1232 delivers a rated capacity of 3.2 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its applications range from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is completely bound within a glass fibre mat, the CP1232 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features  ModelVision CP1232 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)3.2 (at a 20-hour rate) Maximum discharge current48A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1232 lead-acid batteryWhat applications is the CP1232 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applications Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1232?The service life in standby mode (e.g. in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category ‘Standard Commercial’.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1232 is a very common replacement battery for many alarm systems and emergency lighting systems. Before purchasing, please compare the voltage (12V), capacity (3.2Ah), dimensions and connector type (Faston 4.8 mm) with your old battery to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.96 A to maximise the battery’s service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick and tool-free installation. 

The Vision CP1250A is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 volt nominal voltage and 5.2 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides a safe and reliable power supply for a wide range of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceReliable capacity: 5.2 Ah at 12 V for a reliable power supply with minimal space requirements.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Ideal for installation in enclosures with limited space.Flexible installation: Operation is possible in all positions, except for permanent overhead installation.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1250A delivers a nominal capacity of 5.2 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation but is also suitable for applications with occasional charging and discharging cycles. Its field of application ranges from alarm systems and UPS units to mobile medical equipment, where a constant and failure-proof power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1250A is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables a long shelf life with high operational readiness. The robust ABS plastic housing provides excellent protection from shocks and vibrations.Features  ModelVision CP1250A Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)5.2 (at 20h rate) Maximum discharge current78A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.8 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1250A lead-acid batteryFor which applications is the CP1250A suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1250A?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1250A is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), the capacity (approx. 5Ah), the dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charge current: The charging current should not exceed 1.5 A to maximise the battery's service life.What does the connection type Faston 187 mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, allowing quick and tool-free installation.

The Vision CP1250HF2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 5 Ah capacity. This HF Series battery is a high-current type specifically designed for demanding standby operation. Equipped with maintenance-free AGM technology, this battery provides an extremely reliable power supply for critical applications that require high performance in a short time, such as in uninterruptible power supplies (UPS).Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Reliable capacity: 5 Ah at 12 V for secure power supply with a small footprint.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Flexible mounting: Operation is possible in all positions, except permanent use upside down.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for safety-critical applicationsThe Vision CP1250HF2 delivers a nominal capacity of 5 Ah in a 20-hour discharge. Its particular strength lies in its ability to deliver very high currents for short periods of time. This makes it destined for use in uninterruptible power supplies (UPS) that have to supply high loads when starting up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP1250HF2 is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is available on request also in a flame-retardant version according to UL94:V0.Features ModelVision CP1250HF2 Battery typeVRLA AGM (high current) Nominal voltage (V)12 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.75 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1250HF2 lead-acid batteryFor which applications is the CP1250HF2 suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devicesWhat does the designation "HF" and "high current capability" mean?The designation "HF" for Vision batteries stands for "High Rate" or high current. These batteries are constructed with thinner lead plates and a larger active surface, resulting in reduced internal resistance. This allows them to deliver significantly higher currents for short periods than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference compared to a CP1250A standard battery?Although both have the same capacity and size, the CP1250HF2 is specially optimised for high power delivery. The standard battery CP1250A is an all-purpose type. The HF type is the first choice when maximum power output is required in the first few minutes of a power failure, as is the case in UPS systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water, and it can be safely operated in devices and indoors.Can I use this battery for an electric scooter?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For electric scooters that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by "DX" on Vision), as these achieve a significantly longer service life in cyclic operation.

The Vision CP1270 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1270 provides a rated capacity of 7 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1270 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1270 lead-acid batteryWhat applications is the CP1270 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lights. Please compare the voltage (12V), capacity (7Ah), dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the battery’s service life.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, which enables quick and tool-free installation.

The Vision CP1270F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery offers a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment. Powerful performance for versatile applicationsThe Vision CP1270F2 provides a rated capacity of 7 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270F2 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month allows for long storage life with high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features  ModelVision CP1270F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1270F2 lead-acid batteryWhat applications is the CP1270F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connection?The difference lies in the width of the flat plug connection. The F2 connection, also called Faston 250, is 6.35 mm wide, while the F1 connection (Faston 187) is only 4.8 mm wide. The wider F2 connection can transmit higher currents better and is often used in more powerful UPS systems. Please check before purchase which connection type your device requires.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270F2 is one of the most common replacement batteries. Please compare before purchase the voltage (12V), the capacity (7Ah), the dimensions and especially the connection type (Faston 6.35 mm) with your old battery to ensure compatibility.Which charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the service life of the battery.What service life does the CP1270F2 have?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".

The Vision CP1290F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 9 Ah capacity. This highly versatile and reliable general-purpose battery has been designed for long service life in standby operation as well as light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery provides safe and consistent power for a wide range of applications, from backup power in UPS systems to safety-critical alarm systems.Highlights at a glanceHigh capacity: 9 Ah at 12 V for reliable energy supply in standard applications.Long service life: Designed for a service life of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits most common installation spaces for batteries in this power class, often as an upgrade for 7Ah models.Flexible installation: Can be operated in any position, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for a variety of applicationsThe Vision CP1290F2 delivers a nominal capacity of 9 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications with occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is completely bound in a glass fibre mat, the CP1290F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month means it can be stored for a long time while remaining highly ready for use. The durable ABS plastic casing provides excellent protection against shocks and vibration.Features  ModelVision CP1290F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)9 (at 20h rate) Maximum discharge current135A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1290F2 lead-acid batteryFor which applications is the CP1290F2 suitable?The battery is ideally suited for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical equipmentModel building and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is necessary and it is protected against leakage.Can I use this 9Ah battery as a replacement for a 7Ah battery?In many cases yes. The CP1290F2 often has the same dimensions as a standard 7Ah battery. If your device has enough space, you can use this battery as an upgrade for longer standby time. Please check the dimensions beforehand and make sure that your charger is suitable for the higher capacity.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1290F2 is a very common replacement battery. Please compare the voltage (12V), capacity (9Ah), dimensions, and especially the connector type (Faston 6.35 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Trickle charge (float): The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charging: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.7 A in order to maximise the battery's service life.What does the Faston 250 connector mean?Faston 250 refers to the type of connector. These are flat plug connectors with a width of 6.35 mm (0.250 inch). Cables with suitable cable lugs are simply plugged onto these contacts, allowing quick and tool-free installation. 

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP series has been developed for high reliability in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and long-lasting power supply for a wide range of applications, from security systems to emergency power supplies.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting power supply.VdS approved: G 104011 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode at 20 °C.Maintenance-free: Leak-proof and sealed AGM technology with a gas recombination rate of over 99%.High current-carrying capacity: Suitable for loads requiring high inrush currents for short periods.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured in accordance with ISO 9001 and ISO 14001 standards to ensure consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 delivers a capacity of 12 Ah during a 20-hour discharge. It is designed as a general-purpose battery and performs well both in standby parallel operation (float) and during occasional cyclic discharges. With a maximum discharge current of 180 A for 5 seconds, this battery is also ideally suited for short-term power peaks, such as those occurring in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is bound within a glass fibre mat, the CP12120F2 is completely maintenance-free and leak-proof. This ensures safe operation in sensitive environments. The low self-discharge rate of approximately 3% per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against mechanical impact.Features  ModelVision CP12120F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6,35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12120F2 lead-acid batteryWhat applications is the CP12120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12120F2?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.What is the difference between this battery and a purely cycle-resistant type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A battery designed purely for cycling is specifically engineered for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cycle-resistant type would achieve a longer service life.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What temperature ranges and storage conditions apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CSelf-discharge: approximately 3 % per month at 20 °C. For longer storage, it is recommended that the battery be recharged every 6 months. 

The Vision CP12170X is a highly reliable, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 17 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12170X meets the highest standards of quality and operational reliability.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.VdS approved: G 104064 for safety-related applicationsHigh capacity: 17 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: A leak-proof design and a robust housing ensure safe operation.Low self-discharge: Ensures a long shelf life and guarantees high operational readiness.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Reliable performance for safety-critical applicationsThe Vision CP12170X delivers a capacity of 17 Ah during a 20-hour discharge. Its design is optimized for standby parallel operation, in which it is constantly maintained at charging voltage so that it can immediately provide full power in the event of a power failure. With its low internal resistance, the battery is capable of delivering high currents even for short periods, making it an ideal choice for demanding UPS systems and other safety-critical systems.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP12170X is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20 °C allows for long-term storage. The robust casing made of impact-resistant ABS plastic is also available in a flame-retardant version compliant with UL94:V0 on request.Features  ModelVision CP12170X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)17 (at a 20-hour rate) Maximum discharge current255A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12170X lead-acid batteryWhat applications is the CP12170X suitable for?The battery is ideal for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devices What does the long service life of up to 10 years mean?The specification "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20 °C. The actual service life achieved depends heavily on operating conditions such as ambient temperature, charging voltage and the frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12170X uses higher-quality materials and a more robust grid construction than standard batteries. This results in less corrosion and wear during continuous charging, which enables a significantly longer service life in standby mode and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby mode, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No topping up with water is necessary and it can be operated safely in appliances and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in any position, with the exception of a permanently inverted position. This allows for flexible integration into a wide variety of devices and systems.

The Vision CP12170EX is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 17 Ah. This reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceHigh capacity: 17 Ah at 12 V for a long-lasting and reliable power supply.VdS approved: G 104064 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High power density: Offers plenty of power in a compact and widely used housing format.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested safety: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP12170EX delivers a rated capacity of 17 Ah at a 20-hour discharge rate. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. With its low internal resistance, the battery is capable of delivering high currents even for short periods, making it an ideal choice for UPS systems, emergency lighting and other systems with high inrush currents.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is completely bound within a glass fibre mat, the CP12170EX is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features ModelVision CP12170EX Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)17 (at a 20-hour rate) Maximum discharge current255A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.4 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12170EX lead-acid batteryFor which applications is the CP12170EX suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12170EX?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.Can this battery replace an old battery in my UPS system?Yes, the Vision CP12170EX is a very common replacement battery for many UPS systems. Before purchasing, please compare the voltage (12V), capacity (17Ah), dimensions and connection type (M5 screw connection) with your old battery to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What does the M5 connection type mean?M5 refers to the type of connection. It is a metric thread with a diameter of 5 mm. The cables are usually connected to this battery using screws, often with the aid of cable lugs, which ensures a very secure and firm connection.

The Vision CP12200X is a highly reliable, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 20 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12200X fulfils the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 20 Ah at 12 V for long-lasting power supply in an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: Leak-proof design and a robust housing ensure safe operation.Low self-discharge: Enables a long shelf life and ensures high readiness for use.Flexible installation: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12200X provides a capacity of 20 Ah at a 20 hour discharge. Its design is optimised for standby parallel operation, where it is continuously kept at charging voltage in order to provide full performance immediately in the event of a power failure. With its low internal resistance, the battery is capable of supplying high currents for short periods, making it an ideal choice for demanding UPS systems and other safety-relevant systems.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in fibreglass fleece (AGM system), the CP12200X is absolutely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in case of overcharging. The low self-discharge of less than 3 % per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 if required.Features  ModelVision CP12200X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)20 (at 20h rate) Maximum discharge current300A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 6.0 ConnectionM5 screw terminal CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12200X lead-acid batteryFor which applications is the CP12200X suitable?The battery is ideally suited for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devicesWhat does the long service life of up to 10 years mean?The indication "10 years" refers to the constructive service life (design life) of the battery in standby parallel operation, also called float operation, at a constant ambient temperature of 20°C. The actual service life achieved depends greatly on operating conditions such as ambient temperature, charging voltage and frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12200X uses higher-quality materials and a more robust grid design than standard batteries. This results in less corrosion and wear during continuous charging, which enables the significantly longer service life in standby operation and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum maintenance of the battery.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water and it can be operated safely in equipment and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for a permanently overhead mounted position. This enables flexible installation in a wide variety of equipment and systems.

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.