Vision Lead-acid battery CP1229 with 12V and 2.9Ah

The Vision CP1250HF2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 5 Ah capacity. This HF Series battery is a high-current type specifically designed for demanding standby operation. Equipped with maintenance-free AGM technology, this battery provides an extremely reliable power supply for critical applications that require high performance in a short time, such as in uninterruptible power supplies (UPS).Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Reliable capacity: 5 Ah at 12 V for secure power supply with a small footprint.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Flexible mounting: Operation is possible in all positions, except permanent use upside down.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for safety-critical applicationsThe Vision CP1250HF2 delivers a nominal capacity of 5 Ah in a 20-hour discharge. Its particular strength lies in its ability to deliver very high currents for short periods of time. This makes it destined for use in uninterruptible power supplies (UPS) that have to supply high loads when starting up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP1250HF2 is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is available on request also in a flame-retardant version according to UL94:V0.Features ModelVision CP1250HF2 Battery typeVRLA AGM (high current) Nominal voltage (V)12 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.75 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1250HF2 lead-acid batteryFor which applications is the CP1250HF2 suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devicesWhat does the designation "HF" and "high current capability" mean?The designation "HF" for Vision batteries stands for "High Rate" or high current. These batteries are constructed with thinner lead plates and a larger active surface, resulting in reduced internal resistance. This allows them to deliver significantly higher currents for short periods than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference compared to a CP1250A standard battery?Although both have the same capacity and size, the CP1250HF2 is specially optimised for high power delivery. The standard battery CP1250A is an all-purpose type. The HF type is the first choice when maximum power output is required in the first few minutes of a power failure, as is the case in UPS systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water, and it can be safely operated in devices and indoors.Can I use this battery for an electric scooter?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For electric scooters that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by "DX" on Vision), as these achieve a significantly longer service life in cyclic operation.

The Vision 6FM50DX is a robust, cycle-resistant lead-acid battery (VRLA) with 12 volts nominal voltage and a capacity of 50 ampere-hours. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle resistance and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charge and discharge cycles.High capacity: 50 Ah at 12 V (20-hour rate) for long-lasting energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent upside-down mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM50DX reliably delivers power in recurring discharge cycles. Its capacity is 50 Ah at a 20-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM50DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre mat, enabling safe handling and operation in any position. The battery is equipped with self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is impact and break-resistant and is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of about 3% per month enables long-term storage while maintaining a high level of operational readiness.Features  ModelVision 6FM50DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)50 (at 20h rate) Max. Discharge current450 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)14.6 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL  FAQs about the VISION 6FM50DX lead-acid batteryWhat applications is the 6FM50DX best suited for?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunications systems and mobile measuring devices. The battery also holds VdS approval, making it ideal for safety-critical applications such as fire and intruder alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significant loss of capacity or service life. This sets it apart from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 50 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging (standby mode) and 14.4 V to 14.7 V for cycle charging (boost mode). Excessive charging current can shorten the battery's service life..How long does the 6FM50DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature. 

The Vision CP1232 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 3.2 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, particularly in security and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact power: 3.2 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104100 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1232 delivers a rated capacity of 3.2 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its applications range from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is completely bound within a glass fibre mat, the CP1232 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features  ModelVision CP1232 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)3.2 (at a 20-hour rate) Maximum discharge current48A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1232 lead-acid batteryWhat applications is the CP1232 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applications Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1232?The service life in standby mode (e.g. in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category ‘Standard Commercial’.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1232 is a very common replacement battery for many alarm systems and emergency lighting systems. Before purchasing, please compare the voltage (12V), capacity (3.2Ah), dimensions and connector type (Faston 4.8 mm) with your old battery to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.96 A to maximise the battery’s service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick and tool-free installation. 

The VARTA CR2032 is a high-quality 3-volt lithium button cell and the world's most widely used battery for small electronic devices. Based on proven lithium manganese dioxide technology (Li-MnO2), it offers an extremely reliable and long-lasting power supply. Supplied in a protective single blister, it is the ideal choice for a wide range of devices, from computer mainboards to remote controls and medical devices.Highlights at a glanceReliable performance: Constant energy output for the flawless functioning of your electronic devices.Universally applicable: The global standard for a huge variety of applications.Long shelf life: With up to 10 years of shelf life, extremely durable and always ready for use.Wide temperature range: Works reliably even under demanding thermal conditions from -20 °C to +70 °C.Safe packaging: The childproof single blister guarantees freshness and protects the cell until use.Reliable power for compact electronicsThe VARTA CR2032 is the preferred energy source for countless everyday and professional devices where a compact size and absolute reliability are crucial. Its main field of application is buffering BIOS/UEFI settings (CMOS) on computer motherboards. You will also find it in car keys, remote controls, scales, medical devices (e.g. blood glucose meters) and fitness sensors (e.g. heart rate belts).Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) enables a high nominal voltage of 3 volts and extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum operational readiness even after many years of storage and a very long service life in use. This technology is the key to reliability in maintenance-free "fit and forget" applications.Developed for maximum reliability and safetyThe CR2032 is manufactured to the highest quality standards to ensure maximum reliability and leakage resistance. This protects your valuable electronic devices from damage. The protective and childproof single blister ensures that the battery maintains its full performance until use and can be stored safely from short circuits and external influences.Characteristics                                                                                                                                                          Model              VARTA lithium button cell CR2032 (single blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3.0               Capacity (mAh)              230               Diameter (mm)              20.0               Height (mm)              3.2               Weight (g)              3.0        FAQs about the VARTA lithium battery CR2032What does the designation CR2032 mean?The designation gives information about the properties and size of the cell. "C" stands for the lithium chemistry, "R" for the round design. The numbers "2032" stand for the dimensions: 20.0 mm in diameter and 3.2 mm in height.Is this battery rechargeable?No. This is a primary lithium battery. Under no circumstances should you attempt to recharge it. Attempting to charge is extremely dangerous and can lead to fire or explosion.What is the advantage over alkaline or silver oxide button cells?The main advantage is the high voltage of 3 volts in one cell, while alkaline and silver oxide cells only provide 1.5 or 1.55 volts. In addition, lithium cells offer a significantly longer shelf life, a higher capacity and a broader operating temperature range.How should this battery be disposed of?Batteries must not be disposed of in household waste. Please return the empty battery to the designated collection points in stores or municipal recycling centres to ensure environmentally responsible disposal.

The Varta Longlife Power 4922, internationally standardised as 6LR61 (9V block), is the powerful and reliable power source for professional and industrial applications. This high-performance alkaline battery has been specially developed for use in safety-relevant and measurement technology devices where a constant and long-lasting power supply is crucial. As a loose single cell, it is ideal for initial equipment (OEM) and for direct use by commercial users.Highlights at a glanceHigh reliability: Designed for safety-critical applications such as smoke detectors and alarm systems.Industrial application: Ideal for measuring devices, medical technology and OEM production.Long shelf life: With 10 years guaranteed shelf life, perfect for stockpiling and production.Tested quality: Each cell meets the highest quality standards for maximum reliability and performance.Guaranteed performance: Proven Varta product performance, made in Germany.Powerful in professional applicationsThe Varta Longlife Power 6LR61 is the essential power source for a wide range of safety-related and professional devices. Its main area of use is in smoke and fire detectors, alarm systems, access control systems and medical devices (e.g. mobile monitoring devices). It also reliably powers measuring devices such as multimeters, professional audio devices such as wireless microphones and effect units as well as various transmitters and receivers in industry.Reliable and powerful alkaline technologyThe proven alkaline-manganese technology (Zn/MnO2) of the Longlife Power series is designed for high and stable power output. It offers superior performance and durability, especially in safety-critical devices where a constant power supply is essential. The high-quality workmanship "Made in Germany" also ensures maximum leak-proof protection and thus protects your valuable professional electronics.Developed for professional useVarta batteries stand for the highest quality and reliability. As an unpackaged single cell, the Longlife Power 6LR61 is directly intended for processing in industrial production (OEM) or for use as required in service and maintenance. This reduces packaging waste and optimises workflows for professional users who rely on consistently high quality. Features                                                                                                                                                          Model              Varta Longlife Power 4922 / 9V block               Battery type              Alkaline manganese               Nominal voltage (V)              9.0               Capacity (mAh)              640               Dimensions (H x L x W in mm)              48.5 x 26.5 x 17.5               Weight (g)              46.0               Connection              Push-button connection        FAQs about the Varta Longlife Power 6LR61 batteryWhat is the difference between "Longlife Power" and the "Industrial Pro" series?Both lines are aimed at professional users. The "Longlife Power" (formerly High Energy) is designed as a powerful all-rounder for devices with high, often fluctuating energy requirements (e.g. measuring devices, wireless microphones). The "Industrial Pro" is designed for maximum reliability and constant power output for OEM applications and devices in long-term continuous operation (e.g. in alarm systems).Why is this battery particularly recommended for smoke detectors?Its high capacity and the stable, long-lasting power output ensure a long and reliable operating life for the smoke detector. This reduces the frequency of battery changes and gives you the assurance that your smoke detector is ready for action in an emergency.Is this battery suitable for initial equipment (OEM)?Yes, the Longlife Power series as a loose cell is ideal for initial equipment, especially for devices that require a powerful and reliable 9V source. Its long shelf life is a decisive advantage for production planning.Is this battery rechargeable?No, the Varta Longlife Power 6LR61 is a primary battery and cannot be recharged. Charging attempts are dangerous and can lead to the battery leaking or bursting.How must this battery be disposed of?Batteries must not be disposed of with household waste. Please take the empty battery to the designated collection points in shops or municipal recycling centres to ensure environmentally responsible recycling.

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP series has been developed for high reliability in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and long-lasting power supply for a wide range of applications, from security systems to emergency power supplies.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting power supply.VdS approved: G 104011 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode at 20 °C.Maintenance-free: Leak-proof and sealed AGM technology with a gas recombination rate of over 99%.High current-carrying capacity: Suitable for loads requiring high inrush currents for short periods.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured in accordance with ISO 9001 and ISO 14001 standards to ensure consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 delivers a capacity of 12 Ah during a 20-hour discharge. It is designed as a general-purpose battery and performs well both in standby parallel operation (float) and during occasional cyclic discharges. With a maximum discharge current of 180 A for 5 seconds, this battery is also ideally suited for short-term power peaks, such as those occurring in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is bound within a glass fibre mat, the CP12120F2 is completely maintenance-free and leak-proof. This ensures safe operation in sensitive environments. The low self-discharge rate of approximately 3% per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against mechanical impact.Features  ModelVision CP12120F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6,35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12120F2 lead-acid batteryWhat applications is the CP12120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12120F2?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.What is the difference between this battery and a purely cycle-resistant type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A battery designed purely for cycling is specifically engineered for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cycle-resistant type would achieve a longer service life.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What temperature ranges and storage conditions apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CSelf-discharge: approximately 3 % per month at 20 °C. For longer storage, it is recommended that the battery be recharged every 6 months.