Vision Lead-acid battery CP1223 with 12V and 2.3Ah

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.

The Vision CP1270 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1270 provides a rated capacity of 7 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1270 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1270 lead-acid batteryWhat applications is the CP1270 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lights. Please compare the voltage (12V), capacity (7Ah), dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the battery’s service life.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, which enables quick and tool-free installation.

The Vision CP12170X is a highly reliable, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 17 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12170X meets the highest standards of quality and operational reliability.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.VdS approved: G 104064 for safety-related applicationsHigh capacity: 17 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: A leak-proof design and a robust housing ensure safe operation.Low self-discharge: Ensures a long shelf life and guarantees high operational readiness.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Reliable performance for safety-critical applicationsThe Vision CP12170X delivers a capacity of 17 Ah during a 20-hour discharge. Its design is optimized for standby parallel operation, in which it is constantly maintained at charging voltage so that it can immediately provide full power in the event of a power failure. With its low internal resistance, the battery is capable of delivering high currents even for short periods, making it an ideal choice for demanding UPS systems and other safety-critical systems.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP12170X is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20 °C allows for long-term storage. The robust casing made of impact-resistant ABS plastic is also available in a flame-retardant version compliant with UL94:V0 on request.Features  ModelVision CP12170X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)17 (at a 20-hour rate) Maximum discharge current255A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12170X lead-acid batteryWhat applications is the CP12170X suitable for?The battery is ideal for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devices What does the long service life of up to 10 years mean?The specification "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20 °C. The actual service life achieved depends heavily on operating conditions such as ambient temperature, charging voltage and the frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12170X uses higher-quality materials and a more robust grid construction than standard batteries. This results in less corrosion and wear during continuous charging, which enables a significantly longer service life in standby mode and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby mode, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No topping up with water is necessary and it can be operated safely in appliances and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in any position, with the exception of a permanently inverted position. This allows for flexible integration into a wide variety of devices and systems.

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP series has been developed for high reliability in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and long-lasting power supply for a wide range of applications, from security systems to emergency power supplies.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting power supply.VdS approved: G 104011 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode at 20 °C.Maintenance-free: Leak-proof and sealed AGM technology with a gas recombination rate of over 99%.High current-carrying capacity: Suitable for loads requiring high inrush currents for short periods.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured in accordance with ISO 9001 and ISO 14001 standards to ensure consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 delivers a capacity of 12 Ah during a 20-hour discharge. It is designed as a general-purpose battery and performs well both in standby parallel operation (float) and during occasional cyclic discharges. With a maximum discharge current of 180 A for 5 seconds, this battery is also ideally suited for short-term power peaks, such as those occurring in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is bound within a glass fibre mat, the CP12120F2 is completely maintenance-free and leak-proof. This ensures safe operation in sensitive environments. The low self-discharge rate of approximately 3% per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against mechanical impact.Features  ModelVision CP12120F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6,35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12120F2 lead-acid batteryWhat applications is the CP12120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12120F2?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.What is the difference between this battery and a purely cycle-resistant type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A battery designed purely for cycling is specifically engineered for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cycle-resistant type would achieve a longer service life.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What temperature ranges and storage conditions apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CSelf-discharge: approximately 3 % per month at 20 °C. For longer storage, it is recommended that the battery be recharged every 6 months. 

The Vision CP1270F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery offers a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment. Powerful performance for versatile applicationsThe Vision CP1270F2 provides a rated capacity of 7 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270F2 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month allows for long storage life with high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features  ModelVision CP1270F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP1270F2 lead-acid batteryWhat applications is the CP1270F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connection?The difference lies in the width of the flat plug connection. The F2 connection, also called Faston 250, is 6.35 mm wide, while the F1 connection (Faston 187) is only 4.8 mm wide. The wider F2 connection can transmit higher currents better and is often used in more powerful UPS systems. Please check before purchase which connection type your device requires.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270F2 is one of the most common replacement batteries. Please compare before purchase the voltage (12V), the capacity (7Ah), the dimensions and especially the connection type (Faston 6.35 mm) with your old battery to ensure compatibility.Which charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the service life of the battery.What service life does the CP1270F2 have?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".

The Vision 6FM40X is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 40 ampere-hours. It is specially designed for demanding applications involving repeated charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery delivers a reliable, leak-proof, and long-lasting power supply. It is the ideal solution for systems requiring high cycle stability, deep discharges, and an extended service life, and excels in both cyclic and standby applications.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.VdS approved: G 107076 for safety-related applicationsHigh capacity: 40 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to leak-proof AGM technology with over 99% gas recombination.Low self-discharge: Only approx. 3% capacity loss per month at 20 °C, which allows for long-term storage.Flexible installation: Operation is possible in various positions, with the exception of permanent overhead mounting.Long-lasting: A service life of up to 10 years in the design life.High performance for cyclic applicationsThe 6FM40X delivers reliable power in repeated discharge cycles. With a capacity of 40 Ah at a 10-hour discharge rate, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which utilises lead-calcium-tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM System the 6FM40X is completely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The housing is made of robust ABS plastic that is impact- and break-resistant and is also available on request in a flame-retardant version (UL94:V0). The low self-discharge rate of approximately 3% per month enables long-term storage while maintaining high operational readiness.Features ModelVision 6FM40X Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)40 (at a 10-hour rate) Max. discharge current400 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)13.5 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL  FAQs on the Vision 6FM40X lead-acid batteryFor which applications is the 6FM40X best suited?This battery has been specially developed for cyclic applications in which the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs and golf buggies, as well as for use in solar installations, telecommunications systems and mobile measuring devices. Furthermore, the battery has VdS approval, making it ideal for safety-critical applications such as fire and burglar alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specifically designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 40 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging and 14.4 V to 14.7 V for boost charging. An excessively high charging current can shorten the battery’s service life.How long does the 6FM40X battery last?The battery has a design life of up to 10 years at 20 °C. However, the actual service life depends heavily on the specific operating conditions, the depth of discharge and the ambient temperature.