Vision Lead-acid battery CP1232 with 12V and 3.2Ah

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP series has been developed for high reliability in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and long-lasting power supply for a wide range of applications, from security systems to emergency power supplies.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting power supply.VdS approved: G 104011 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode at 20 °C.Maintenance-free: Leak-proof and sealed AGM technology with a gas recombination rate of over 99%.High current-carrying capacity: Suitable for loads requiring high inrush currents for short periods.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured in accordance with ISO 9001 and ISO 14001 standards to ensure consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 delivers a capacity of 12 Ah during a 20-hour discharge. It is designed as a general-purpose battery and performs well both in standby parallel operation (float) and during occasional cyclic discharges. With a maximum discharge current of 180 A for 5 seconds, this battery is also ideally suited for short-term power peaks, such as those occurring in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is bound within a glass fibre mat, the CP12120F2 is completely maintenance-free and leak-proof. This ensures safe operation in sensitive environments. The low self-discharge rate of approximately 3% per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against mechanical impact.Features  ModelVision CP12120F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6,35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs on the Vision CP12120F2 lead-acid batteryWhat applications is the CP12120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12120F2?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.What is the difference between this battery and a purely cycle-resistant type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A battery designed purely for cycling is specifically engineered for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cycle-resistant type would achieve a longer service life.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What temperature ranges and storage conditions apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CSelf-discharge: approximately 3 % per month at 20 °C. For longer storage, it is recommended that the battery be recharged every 6 months. 

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The XCELL XP7/12F2 impresses as a reliable 12-volt lead-acid battery with 7.2 Ah (20-hour rate) capacity, robust AGM technology and compact dimensions. Equipped with Faston terminals, this battery is ideal for security and emergency power systems, telecommunications and mobile devices. With a service life of up to 10 years in standby mode, it offers a stable power supply with minimal maintenance.Highlights at a glanceRobust capacity: 7.2 Ah at a 20-hour discharge rate for a wide range of applicationsVdS approved: G 116061 for safety-related applicationsLong service life: Up to 10 years standby service life at 20 °CHigh discharge reserves: Maximum discharge currents of up to 108 A for 5 secondsTemperature-resistant: Powerful from -15 °C to +50 °CCompact design: Only 151 x 65 x 100 mm at approx. 2.26 kgStrong performance for demanding applicationsThe XCELL XP7/12F2 is the ideal solution for applications that require a compact design combined with high energy density. Typical areas of application include uninterruptible power supplies (UPS), safety-relevant lighting systems, medical devices, alarm systems and other industrial applications. Thanks to its absorbent glass mat technology, the battery offers reliable performance even during short-term load peaks.Efficient energy for continuous operationThis battery is characterised by a low self-discharge of only around 9 % in 3 months at 25 °C, which means it is quickly ready for use even after longer periods of storage. Its charging characteristics support both standby mode with a recommended voltage of 13.60 to 13.80 V and cyclic use with 14.50 to 14.90 V. With a recommended max. charging current of 2.16 A, the battery remains safe and efficient in operation.Reliable technology for the highest demandsAGM technology ensures leak-proof, maintenance-free operation with an internal gas recovery system. The XCELL XP7/12F2 can be installed in any position (except upside down) and reliably withstands temperatures between -15 °C and +50 °C during discharge operation. Its high cycle resistance and UL and CE certifications underline its suitability for demanding industrial environments.Features  ModelXCELL XP7-12F2 Battery typeVRLA AGM (Standby / General purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, CE, UL  FAQs about the XCELL XP7/12F2 lead-acid batteryHow long is the battery service life?The XCELL XP7/12F2 is designed for a service life of up to 10 years in standby mode at 20 °C.What is the battery particularly suitable for?It is ideal for applications such as UPS systems, emergency lighting, medical devices, telecommunications systems and mobile electronic devices.Can the battery also be used at low temperatures?Yes, the battery works reliably in a discharge temperature range from -15 °C to +50 °C.Does the battery need regular maintenance?No, the battery is maintenance-free thanks to its sealed, valve-regulated AGM design.What charging parameters need to be observed?A charging voltage of 13.60 – 13.80 V is recommended for standby mode, and 14.50 – 14.90 V for cyclic operation. The maximum charging current should not exceed 2.16 A. 

The Vision CP1229 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 2.9 Ah. This compact and reliable all-purpose battery is designed for long-term service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable power supply for a wide variety of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact energy: 2.9 Ah capacity at 12 V for reliable power supply with low space requirements.Long service life: Designed for a service life of up to 5 years in standby use (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Provides a stable voltage level and low self-discharge.Flexible installation: Operation is possible in all positions except for permanent overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devicesPowerful performance for versatile applicationsThe Vision CP1229 delivers a nominal capacity of 2.9 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application ranges from alarm systems and UPS systems to mobile medical devices where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1229 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of under 3% per month allows for long storage periods with high readiness. The sturdy ABS plastic housing offers excellent protection against shocks and vibrations.Properties  ModelVision CP1229 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.9 (at 20h rate) Maximum discharge current43.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)79 x 56 x 105 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1229 lead-acid batteryFor which applications is the CP1229 suitable?The battery is ideal for a wide range of standby and light cyclical applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. It does not require topping up with distilled water and is protected against leakage.What is the service life of the CP1229?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1229 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.9Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycling charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.87 A in order to maximise battery life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables quick and tool-free installation. 

The XCELL XP2.3-12 is a slim 12-volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides a reliable power supply for safety-critical and industrial applications and, with VdS G 115071 certification, meets the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS approved: G 115071 for safety-related applicationsPower reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm, weighing approx. 0.9 kgMaintenance-free: Valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security technology, emergency lighting, fire alarm systems, communication and measuring equipment, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) ensures a stable power supply, even during brief load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C is recommended, with temperature compensation of minus 18 mV per °C. In cyclic operation, the final charging voltages range from 14.50 to 14.90 V at 25 °C, with compensation of minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, from minus 10 °C to plus 50 °C during charging, and from minus 20 °C to plus 50 °C for storage.Dimensions and connectionsThe T1 copper flat plug connectors enable quick integration into existing systems. Thanks to its compact, elongated design, the battery fits particularly well in narrow enclosures and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20-hour rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4,8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP2.3-12What is the expected service life of the XP2.3-12 in standby mode?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years of float operation. Regular testing cycles and the correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety systems such as fire alarm and intruder alarm systems, emergency lighting, communication and measuring equipment, as well as control systems with a 12-volt supply.What charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please note the relevant temperature compensation.What is the self-discharge rate?At 25 °C, approximately 91 per cent of capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.What connections are available on the XP2.3-12?The XP2.3-12 features T1 copper flat plug connectors for quick and secure installation. 

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.