Vision Lead-acid battery CP1250A with 12V and 5.2Ah

The Vision CP1229 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 2.9 Ah. This compact and reliable all-purpose battery is designed for long-term service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable power supply for a wide variety of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact energy: 2.9 Ah capacity at 12 V for reliable power supply with low space requirements.Long service life: Designed for a service life of up to 5 years in standby use (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Provides a stable voltage level and low self-discharge.Flexible installation: Operation is possible in all positions except for permanent overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devicesPowerful performance for versatile applicationsThe Vision CP1229 delivers a nominal capacity of 2.9 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application ranges from alarm systems and UPS systems to mobile medical devices where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1229 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of under 3% per month allows for long storage periods with high readiness. The sturdy ABS plastic housing offers excellent protection against shocks and vibrations.Properties  ModelVision CP1229 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.9 (at 20h rate) Maximum discharge current43.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)79 x 56 x 105 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1229 lead-acid batteryFor which applications is the CP1229 suitable?The battery is ideal for a wide range of standby and light cyclical applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. It does not require topping up with distilled water and is protected against leakage.What is the service life of the CP1229?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1229 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.9Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycling charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.87 A in order to maximise battery life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables quick and tool-free installation. 

The Ultralife U9VLJP10 is the economical bulk package (bulk pack) of the proven U9VL-J-P 9V lithium battery. This set contains 10 pieces of high-performance batteries, mostly in space-saving foil packaging instead of individual plastic blisters. This variant is aimed specifically at professional users, janitorial services, hoteliers and installers who need to service a large number of smoke detectors, security sensors or medical devices at the same time. Technically, the cell is identical to the retail version: it offers up to 10 years of service life and maximum reliability.Highlights at a glanceValue pack (10 pieces): Supplied as a 10-unit package (often foil-wrapped or in an industrial carton), which reduces the price per battery compared to individual blister packs and reduces packaging waste – ideal for large projects.The smoke detector standard: Enables up to 10 years maintenance-free operation in compatible smoke detectors, which drastically minimises maintenance effort in rental properties and commercial premises.High energy density: With 1200 mAh, it offers huge reserves for long-term use and lasts up to 5 times longer than conventional 9V alkaline batteries.Long shelf life: Thanks to the very low self-discharge, you can easily store this 10-pack for up to 10 years without the batteries losing significant performance.Wide range of applications: Works reliably at temperatures from -20°C to +60°C, making it the first choice for unheated warehouses, attics or garages.Safety construction: The housing is robust and leak-proof; the lithium manganese dioxide chemistry is non-toxic and contains no cadmium, mercury or lead.The solution for facility management & large installationsThe U9VLJP10 is the standard choice when entire buildings need to be equipped with new batteries. Whether during the annual replacement in hospitals (pagers, monitors), in hotels (electronic door locks, safes) or in apartment buildings (smoke detectors): The bulk pack saves time when unpacking and is kind to the budget. Features ModelUltralife U9VLJP10 (industrial pack / foil) ApplicationLarge scale users, facility management, OEM (less waste) TechnologyLithium manganese dioxide (Li-MnO2) - primary cell Voltage9 V (Nominal) Capacity1200 mAh (constant to end of life) Packaging unit10 pieces shrink-wrapped in foil (bulk) Dimensions (L x W x H in mm)48.5 x 26.5 x 17.5 (standard 9V block) Shelf life10 years (ideal for long-term smoke detectors) Temperature range-20°C to +60°C Special featuresCost-efficient bulk package, more environmentally friendly (less plastic) Weight (g)approx. 37 (per battery)  FAQs about the Ultralife U9VLJP10What is the difference to the U9VLJP-BP?There is no technical difference in the battery itself. BP = Blister Pack (individually packaged for retail sale). 10 (or FP) = Foil Pack / Bulk (10 pieces packed together for industry). The U9VLJP10 is more environmentally friendly (less plastic waste) and usually cheaper per item.Is "round cell" the correct term?Your enquiry mentioned "round cell", which is a common misunderstanding. The U9VL is a 9V block (rectangular, prismatic). Internally, it consists of three flat cells (not round cells), but the design is the classic "E-block". Ultralife also manufactures real round cells (like the ER14505 AA), but the designation U9VL always refers to the 9V block.What happens if I store the batteries?Almost nothing. That is the great advantage of lithium. You can buy this 10-pack, take out 2 batteries and put the remaining 8 in a cupboard for 8 years. If you need the remaining 8 batteries then, they will still have almost 100% of their charge. Store them ideally in a cool, dry place.Are the batteries packed short-circuit-proof?As a rule, the batteries in the pack of 10 are supplied so that the terminals cannot touch each other (e.g. by a plastic cap on each battery or a tightly fitting foil). Important: If you open the pack and put loose batteries in a drawer, be sure to tape the terminals or leave the protective cap on. If two 9V blocks touch at the terminals, a short circuit immediately occurs (fire hazard!).

The Yuasa NP7-12 is a powerful, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 7 Ah. It impresses with its reliable performance, robust design and versatile application options, ideal for industrial applications, safety and emergency power systems.Highlights at a glanceReliable capacity: 7 Ah at 12 V for constant power supply.Compact format: 151 × 65 × 97.5 mm, ideal for limited installation space.Flexible installation: Can be installed in any position, except permanently upside down.Maintenance free: VRLA technology with low pressure drain valves.Durable: EUROBAT classification "Standard Commercial" for up to 5 years of use.High current carrying capacity: Up to 210 A discharge current for 1 second.Robust performance for demanding applicationsThe NP7-12 offers a 20-hour capacity of 7 Ah (up to 1.75 V/cell at 20°C) and a 10-hour capacity of 6.4 Ah (up to 1.8 V/cell). Thanks to its high current carrying capacity of up to 210 A for 1 second, the battery is particularly suitable for emergency power systems, UPS systems and safety-related applications.Maintenance-free operation and long service lifeThe NP7-12 is classified as "Standard Commercial" according to EUROBAT and offers a service life of up to 5 years at 20°C ambient temperature. The self-discharge is only about 3% per month, ensuring a high level of operational readiness even after extended storage. The housing is made of durable ABS plastic (UL94:HB) and is also available in a flame-retardant version (UL94:V0) upon request. The battery meets the ISO 9001 quality standard.Easy integration and reliable technologyThe battery is equipped with Faston connectors (4.75 mm) and can be easily integrated into almost any system. Installation is possible in all positions, except permanently upside down. Each of the six cells is fitted with a low-pressure relief valve, which reseals automatically after pressure equalisation for maintenance-free and safe operation. The recommended float charge voltage is 13.65 V (±1%) per unit, for cyclic operation 14.5 V (±3%). The maximum charging current is 1.75 A during cyclic operation; for float charging there is no limit.Features ModelYuasa NP7-12 Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current80A (for 5 seconds) Charge voltage (float charge)13.65V (±1%) Charge voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 65 x 94 Weight (kg)2.5 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa lead-acid battery with 12V and 7AhHow long does the NP7-12 last?The NP7-12 offers a service life of up to 5 years at 20°C ambient temperature and complies with the EUROBAT category "Standard Commercial".For which applications is the battery suitable?The battery is suitable for:UPS systemsFire detection and alarm systemsMedical devicesEmergency lightingTelecommunications and control systemsIs flexible installation possible?Yes, the battery can be operated in almost any position, just avoid a permanently upside down mounting position.What safety features are integrated?The battery features a robust ABS housing and low-pressure relief valves for safe gas pressure regulation. A flame-retardant housing is optionally available.How and with which parameters is the NP7‑12 charged correctly?Float charging voltage: 13.65 V unit voltage (2.275 V/cell) at 20°C, temperature compensation –3 mV/cell/°C.Cyclic (boost) charging voltage: 14.5 V unit (2.42 V/cell), compensated with –4 mV/cell/°C.Recommended charging current for cyclic operation: up to approx. 1.75 A (~0.25 C)What is the maximum discharge current and how good is the deep discharge resistance?Short-term peak current (1 sec): 210 A,1‑minute current: 48 AInternal impedance: about 23 mΩ at 1 kHz.The battery recovers excellently after deep discharge and is structurally robust in designWhat is the self-discharge during storage and what should be observed?At 20°C, the self-discharge is about 3% per month. The NP7‑12 can be stored for up to 12 months, provided it is recharged regularly. Storage should be between –20°C and +60°C, ideally not exceeding +30°C. 

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. Equipped with maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclical operation, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for long-lasting power supply.VdS-certified: Ideal for fire and burglar alarm systems.Maintenance-free: Leak-proof AGM technology with > 99 % gas recombination.High current carrying capacity: Up to 360 A discharge current for 1 second.Flexible mounting: Operation in all positions (except permanently overhead).Durable: EUROBAT class “Standard Commercial” with up to 5 years service life.Powerful performance for safety-critical applicationsThe NP12-12 delivers 12 Ah with a 20-hour discharge (to 1.75 V/cell) and 11.1 Ah with a 10-hour discharge (to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited for short-term power peaks.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), the NP12-12 is absolutely maintenance-free and leak-proof. The battery features self-closing low-pressure release valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ according to EN IEC 60896-21, the short-circuit current is 320 A. The low self-discharge of approx. 3 % per month allows long-term storage with high operational readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (standby charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa NP12-12 lead-acid batteryFor which applications is the NP12-12 suitable?The battery is ideally suited for:VdS-compliant fire and burglar alarm systemsUninterruptible power supplies (UPS)Safety lightingTelecommunicationsControl and regulation technologyMedical devicesIs the battery maintenance-free?Yes, thanks to AGM technology the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for permanently upside-down installation.Which charging parameters (float vs. cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charge limitation: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarge: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3 % per month at 20 °C

The Yuasa NP2.3-12 is a maintenance-free VRLA industrial battery with VdS approval. It impresses with its compact dimensions, reliable power delivery and a service life of up to 5 years. Ideal if you need a stable 12-volt supply in a compact space for safety and emergency power applications.Highlights at a glanceReliable capacity: 2.3 Ah at 20-hour discharge down to 10.5 V at 20 °C.Compact and lightweight: 178 x 34 x 64 mm at 0.95 kg.Flexible mounting: Operation in any position except permanently upside down.Low self-discharge: About 3 percent per month at 20 °C.Especially safe: Low pressure relief valves, UL recognised materials.Easy installation: FASTON plug-in connection 4.7 mm.Maximum performance for compact applicationsDespite its small size, the NP2.3-12 delivers high charging currents for short periods. Up to 69 A for 1 second and 23 A for 1 minute are possible. The measured internal resistance is 90 mΩ at 1 kHz. This makes the battery particularly suitable for fire and intruder alarm systems, emergency and safety lighting, controllers, measuring instruments as well as small UPS and buffer applications.Efficiency meets long service lifeThe EUROBAT classification as Standard Commercial stands for a typical service life of 3 to 5 years at 20 °C. The low self-discharge supports long service times. The housing is made as standard from ABS to UL94 HB, with an optionally available flame-retardant FR version to UL94 V0. Valve-regulated recombination and low-maintenance operation ensure high operational safety.Technology for flexible applicationsThe battery can be operated in almost any position except permanently upside down. The operating temperature range for charging and discharging is minus 20 °C to plus 60 °C. For float charging, 13.65 V ±1 percent is provided, with temperature compensation of minus 3 mV per cell and degree Celsius. For fast charging, 14.50 V ±3 percent applies, compensation minus 4 mV per cell and degree Celsius.  For float charging, no current limitation is required, for fast charging 0.575 A is recommended. Sufficient ventilation must be ensured, as hydrogen can be produced with VRLA batteries.Electrical connection is via FASTON 4.7 mm plug-in connectors. The compact design facilitates installation in narrow housings and racks.Features  ModelYuasa NP2.3-12 VdS Battery typeVRLA AGM (cycle-resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current23A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)1 ConnectionBlade terminal CertificationsIEC 60896-21+22, UL, VdS  FAQs about the Yuasa NP lead batteryFor which applications is the battery suitable?Preferred areas of application are VdS-compliant fire and intruder alarm systems, emergency and safety lighting, control and signalling systems, measuring instruments, small UPS and buffer applications.How is the battery installed?Mounting is possible in any position except permanently upside down. Electrical connection is via FASTON blade terminals 4.7 mm. Please ensure correct polarity and sufficient ventilation.What charging voltage is recommended?For float charging 13.65 V ±1 percent at 20 °C, temperature compensation minus 3 mV per cell per °C. For fast charging 14.50 V ±3 percent at 20 °C with compensation minus 4 mV per cell per °C.No current limitation required for float charging, for fast charging 0.575 A.Are there any special safety instructions?Each cell has a low pressure valve for controlled venting. Do not operate batteries in gas-tight housings. Dispose of at the end of service life according to local regulations.Ask ChatGPTIs the battery suitable for series and parallel connections?Basically yes, provided installation is carried out according to Yuasa guidelines. Observe identical cable lengths per strand, suitable fuses, correct polarity and sufficient ventilation. For multiple strands, follow the instructions for multi-strand connection. Which chargers are suitable?Chargers with constant voltage for VRLA-AGM, set to the voltages specified in the data sheet and taking temperature compensation into account. 

The Yuasa NP24-12I VdS is an industrial, valve-regulated lead-acid battery (VRLA) with 12 V nominal voltage and 24 Ah capacity. With leak-proof AGM technology, high current carrying capacity, and VdS approval, this maintenance-free battery is the reliable energy source for safety-critical applications such as fire alarm systems, UPS systems, or telecommunications installations.Highlights at a glanceReliable capacity: 24 Ah (20h) / 22.3 Ah (10h) at 12 V for constant power supplyCertified: VdS approval for safety-relevant systemsHigh peak load: Maximum discharge current up to 500 A for 1 secondMaintenance-free: AGM technology with > 99 % gas recombinationFlexible installation: Female thread or bolt connections (M5) with 2.45 Nm tightening torquePowerful solution for critical systemsWith a nominal capacity of 24 Ah (20h discharge to 1.75 V/cell) and 22.3 Ah (10h discharge to 1.8 V/cell), the NP24-12I ensures reliable and stable power supply – even during sudden load peaks up to 500 A. Ideally suited for emergency power supplies, security technology and communication systems where reliability is the highest priority.Robust technology with high operational reliabilityThe maintenance-free AGM technology (Absorbent Glass Mat) completely contains the electrolyte in the separator, so no free electrolyte is present. With gas recombination of over 99 % and self-closing safety valves, the battery is safe in operation and does not need topping up. The low self-discharge of about 3 % per month makes it particularly stable in storage. The robust ABS plastic housing complies with UL94:HB, and a flame-retardant version in accordance with UL94:V0 is available on request.Features  ModelYuasa NP24-12I VdS Battery typeVRLA AGM (cycle resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current240A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cycle operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)175 x 166 x 125 Weight (kg)8.6 ConnectionM5 thread CertificationsIEC 60896-21+22, UL, VdS  FAQs about the Yuasa lead-acid battery with 12V and 24AhFor which applications is the NP24-12I suitable?It is ideal for fire detection systems, UPS systems, emergency lighting, telecommunications, security technology and PV backup systems.What is the typical service life in standby mode?The NP24-12I offers a service life of up to 5 years at 20 °C and is classified as "Standard Commercial" according to EUROBAT.What type of connection is used?Female thread or bolt connections (M5) with a tightening torque of 2.45 Nm ensure a secure and vibration-resistant connection.Is the battery really maintenance-free and leak-proof?Yes. VRLA technology with gas recombination and valve-regulated design. Each cell has a low-pressure valve. yuasa.deIn which position may the NP24-12I be installed?Installation and operation possible up to 90 degrees from the upright position. Permanent overhead installation is not intended.Which charging voltages must be observed and how high may the charging current be?Float charge at 20 °C 13.65 V per block. Cyclic charge at 20 °C 14.5 V per block. Temperature compensation Float about −3 mV per cell and °C, cyclic about −4 mV per cell and °C. Cyclic charging current up to 6 A.Can the battery be operated in a closed housing?No, VRLA batteries can emit hydrogen gas. Installation in hermetically sealed enclosures is not permitted and adequate ventilation must always be ensured.