Vision Lead-acid battery CP12200X with 12V and 20Ah

The Vision CP1223 is a high-quality, valve-regulated lead acid battery (VRLA) with 12 volt nominal voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable energy provision for a wide variety of applications, particularly in security and medical technology.Highlights at a glanceCompact energy: 2.3 Ah capacity at 12 V for reliable energy provision in restricted spaces.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Offers a stable voltage position and low self-discharge.Flexible installation: Operation is possible in all positions except permanent upside-down use.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1223 delivers a nominal capacity of 2.3 Ah with a 20 hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its area of application ranges from alarm systems and UPS systems to mobile medical devices where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1223 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables long storage life with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1223 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (maintenance charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1223 lead-acid batteryFor which applications is the CP1223 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to refill with distilled water and it is protected against leaks.What is the service life of the CP1223?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A in order to maximise the battery’s service life.What does the Faston 187 connector mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free installation.

The Vision CP1270 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power for a wide range of applications, from emergency backup in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power in standard applications.Long service life: Designed for a lifespan of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits in most standard installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1270 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its areas of use range from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month enables long storage capability with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1270 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1270 lead-acid batteryFor which applications is the CP1270 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lighting. Please compare the voltage (12V), the capacity (7Ah), the dimensions and the connector type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20°C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise battery service life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables fast and tool-free installation.

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP Series was developed for high reliability in standby operation and for light cyclic applications. Equipped with maintenance-free AGM technology, this battery offers safe and long-lasting energy supply for a wide range of applications, from security technology to emergency power supply.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting energy supply.Long service life: Designed for a service life of up to 5 years in standby operation at 20°C.Maintenance-free: Leakproof and sealed AGM technology with a gas recombination rate of over 99%.High current capacity: Suitable for devices that require high inrush current for short periods.Flexible installation: Operation is possible in all positions, except permanent upside-down use.Tested quality: Manufactured according to ISO9001 and ISO14001 standards for consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 provides a capacity of 12 Ah at a 20-hour discharge. It is designed as a general-purpose battery and is effective both in standby parallel operation (float) and with occasional cyclical discharges. With a maximum discharge current of 180A for 5 seconds, this battery is also ideally suited for short-term power peaks, as required in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is bound in a glass fibre mat, the CP12120F2 is absolutely maintenance-free and leakproof. This ensures safe operation in sensitive environments. The low self-discharge rate of around 3% per month enables long shelf life with high operational readiness. The robust ABS plastic housing offers excellent protection against mechanical influences.Features  ModelVision CP12120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12120F2 lead-acid batteryFor which applications is the CP12120F2 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (BMA)Emergency lightingMedical devicesTelecommunication systemsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaking.What is the service life of the CP12120F2?The service life in standby operation (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20°C and thus corresponds to the EUROBAT category "Standard Commercial".What is the difference between this battery and a purely cyclic type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A purely cyclic battery is specially designed for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cyclic type would deliver a longer service life.What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 13.5V and 13.8V.Cyclic charge: For occasional cyclic charging a voltage between 14.4V and 15.0V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to avoid impairing service life.What are the temperature ranges and storage conditions?Charging: 0°C to +40°CDischarging: -20°C to +50°CStorage (fully charged): -20°C to +40°CSelf-discharge: about 3% per month at 20°C. For longer storage, it is recommended to recharge the battery every 6 months. 

The Vision 6FM75TDX is a high-performance, cycle-proof and valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 75 Ah capacity. Designed for demanding cyclic applications, this battery combines maintenance-free AGM technology with a robust design. It offers a reliable and long-lasting energy solution for applications where repeated charging and discharging is a daily occurrence, such as in solar technology, mobile applications or rehabilitation technology.Highlights at a glanceHigh cycle stability: Developed for demanding cyclic use with a long service life.Strong capacity: 75 Ah at 12 V for long-lasting and reliable power supply.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after longer periods of disuse.Flexible installation: Operation is possible in all positions, with the exception of continuous upside-down use.Robust construction: The durable ABS plastic housing reliably protects the battery against mechanical impact.Reliable energy for demanding cyclesThe Vision 6FM75TDX has been specially optimised for cyclic operation. It delivers a nominal capacity of 75 Ah on a 20-hour discharge (C20). Its particular strength lies in its ability to be repeatedly deeply discharged and recharged without significant loss of capacity. This makes it the ideal choice for solar installations, electric vehicles and other mobile power supplies that require constant and reliable performance.Advanced technology for maximum longevityThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, where the electrolyte is contained in a glass fibre mat, the 6FM75TDX is fully sealed and maintenance-free. This not only prevents leaks, but also enables efficient gas recombination within the cell. The battery features low internal resistance, allowing high current draw. The low self-discharge rate ensures that the stored energy is preserved for long periods, which is particularly advantageous for seasonally used equipment.Features ModelVision 6FM75TDX Cyclic Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)75 (at 20h rate) Maximum discharge current750A (for 5 seconds) Charge voltage (float)13.6V - 13.8V Charge voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 600 cycles at 80% depth of discharge Dimensions (L/W/H, mm)260 x 168 x 214 Weight (kg)approx. 23.5 ConnectionM6 internal thread CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision 6FM75TDX lead-acid batteryFor which applications is the Vision 6FM75TDX suitable?This battery is specially designed for cyclic applications and is excellently suited for:Solar and photovoltaic off-grid systemsMotorhomes, caravans and boatsElectric wheelchairs and mobility scootersCleaning machines and automated guided vehicles (AGVs)Uninterruptible power supplies (UPS) with high cycle requirementsWhat does the term "cycle-proof" mean?Cycle-proof means that the battery is designed to be frequently and deeply discharged and then fully recharged. Unlike a conventional starter battery, which is designed for short, high current surges, a cycle-proof battery retains its capacity over many of these charge and discharge cycles.Is the battery completely maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.How should the battery be charged to maximise its service life?For maximum service life, we recommend using a good quality charger with an IUoU charging profile suitable for AGM batteries. The charging voltage should be between 14.4 V and 15.0 V in cyclic operation at 20 °C. The maximum charging current should not exceed 22.5 A.Can I connect several of these batteries together?Yes, you can connect several Vision 6FM75TDX batteries in series to increase the voltage (e.g. two for a 24 V system), or in parallel to increase the capacity. Please ensure that you only connect batteries of the same type, age and state of charge.What storage conditions and temperature ranges apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CAlways store the battery fully charged in a cool, dry place. Due to the low self-discharge rate, recharging is only required every six months during longer storage.

The Vision 6FM50DX is a robust, cycle-resistant lead-acid battery (VRLA) with 12 volts nominal voltage and a capacity of 50 ampere-hours. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle resistance and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charge and discharge cycles.High capacity: 50 Ah at 12 V (20-hour rate) for long-lasting energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent upside-down mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM50DX reliably delivers power in recurring discharge cycles. Its capacity is 50 Ah at a 20-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM50DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre mat, enabling safe handling and operation in any position. The battery is equipped with self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is impact and break-resistant and is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of about 3% per month enables long-term storage while maintaining a high level of operational readiness.Features  ModelVision 6FM50DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)50 (at 20h rate) Max. Discharge current450 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)14.6 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL  FAQs about the VISION 6FM50DX lead-acid batteryWhat applications is the 6FM50DX best suited for?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunications systems and mobile measuring devices. The battery also holds VdS approval, making it ideal for safety-critical applications such as fire and intruder alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significant loss of capacity or service life. This sets it apart from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 50 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging (standby mode) and 14.4 V to 14.7 V for cycle charging (boost mode). Excessive charging current can shorten the battery's service life..How long does the 6FM50DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature. 

The Vision CP12240DX is a high-performance, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 24 Ah. This battery has been specially developed for demanding cyclical applications where regular and deep discharge is the order of the day. Equipped with robust, maintenance-free AGM technology, it is the ideal energy source for mobile applications in rehabilitation technology, for electric vehicles or in the leisure sector.Highlights at a glanceHigh cycle stability: Developed for a long service life with repeated, deep discharge and recharging.High capacity: 24 Ah at 12 V for a long-lasting and reliable power supply for mobile consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High power density: Offers a lot of energy in a compact and widely used housing format.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: Enables longer shelf life without significant loss of capacity.High performance for cyclic applicationsThe Vision CP12240DX reliably delivers a capacity of 24 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it a high resistance to the stresses of constant charging and discharging. This makes it the perfect choice for electric wheelchairs, golf caddies, e-scooters and other electric vehicles where maximum cycling and reliability are important.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, in which the electrolyte is securely bound in a glass fibre fleece, the CP12240DX is completely sealed, leak-proof and vibration-resistant. The low internal resistance enables efficient energy output even at higher currents. The housing made of robust ABS plastic reliably protects the internal components from mechanical stress in everyday mobile use and ensures a long and safe service life.Battery features  ModelVision CP12240DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 2000 cycles at 30% depth of discharge Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 7.8 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240DX lead-acid batteryWhat applications is the CP12240DX suitable for?The battery is ideal for a variety of demanding cyclic applications:Electric wheelchairs, mobility scooters and scootersGolf caddies and other light electric vehiclesMedical devices such as patient liftsMobile cleaning machinesMarine and camping applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage in any position.What is the difference to a standard AGM battery?The CP12240DX is designed as a cycle-proof battery. It uses reinforced lead plates and special additives that make it more resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby operation (e.g. in UPS systems) and would lose capacity more quickly during cyclical use.Can the battery be installed flexibly?Yes, the battery can be operated in all positions with the exception of a permanently upside down position. This enables flexible installation in a wide range of devices and vehicles.What are the charging parameters for this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Float charge voltage (20 °C): approx. 13.5 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 7.2 A. The use of a suitable charger is crucial for a long service life.Can two of these batteries be connected to form a 24V system?Yes, you can easily connect two CP12240DX batteries in series to create a 24V system. This is a very common configuration in electric wheelchairs and scooters. Please always use two new, identical batteries for this.