Vision Lead-acid battery CP12120D Cyclic with 12V and 12Ah

The Vision 6FM50DX is a robust, cycle-resistant lead-acid battery (VRLA) with 12 volts nominal voltage and a capacity of 50 ampere-hours. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle resistance and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charge and discharge cycles.High capacity: 50 Ah at 12 V (20-hour rate) for long-lasting energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent upside-down mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM50DX reliably delivers power in recurring discharge cycles. Its capacity is 50 Ah at a 20-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM50DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre mat, enabling safe handling and operation in any position. The battery is equipped with self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is impact and break-resistant and is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of about 3% per month enables long-term storage while maintaining a high level of operational readiness.Features  ModelVision 6FM50DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)50 (at 20h rate) Max. Discharge current450 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)14.6 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL  FAQs about the VISION 6FM50DX lead-acid batteryWhat applications is the 6FM50DX best suited for?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunications systems and mobile measuring devices. The battery also holds VdS approval, making it ideal for safety-critical applications such as fire and intruder alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significant loss of capacity or service life. This sets it apart from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 50 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging (standby mode) and 14.4 V to 14.7 V for cycle charging (boost mode). Excessive charging current can shorten the battery's service life..How long does the 6FM50DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature. 

The Vision CP1250HF2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 5 Ah capacity. This HF Series battery is a high-current type specifically designed for demanding standby operation. Equipped with maintenance-free AGM technology, this battery provides an extremely reliable power supply for critical applications that require high performance in a short time, such as in uninterruptible power supplies (UPS).Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Reliable capacity: 5 Ah at 12 V for secure power supply with a small footprint.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Flexible mounting: Operation is possible in all positions, except permanent use upside down.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for safety-critical applicationsThe Vision CP1250HF2 delivers a nominal capacity of 5 Ah in a 20-hour discharge. Its particular strength lies in its ability to deliver very high currents for short periods of time. This makes it destined for use in uninterruptible power supplies (UPS) that have to supply high loads when starting up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP1250HF2 is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is available on request also in a flame-retardant version according to UL94:V0.Features ModelVision CP1250HF2 Battery typeVRLA AGM (high current) Nominal voltage (V)12 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.75 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1250HF2 lead-acid batteryFor which applications is the CP1250HF2 suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devicesWhat does the designation "HF" and "high current capability" mean?The designation "HF" for Vision batteries stands for "High Rate" or high current. These batteries are constructed with thinner lead plates and a larger active surface, resulting in reduced internal resistance. This allows them to deliver significantly higher currents for short periods than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference compared to a CP1250A standard battery?Although both have the same capacity and size, the CP1250HF2 is specially optimised for high power delivery. The standard battery CP1250A is an all-purpose type. The HF type is the first choice when maximum power output is required in the first few minutes of a power failure, as is the case in UPS systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water, and it can be safely operated in devices and indoors.Can I use this battery for an electric scooter?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For electric scooters that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by "DX" on Vision), as these achieve a significantly longer service life in cyclic operation.

The Vision CP1250A is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 volt nominal voltage and 5.2 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides a safe and reliable power supply for a wide range of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceReliable capacity: 5.2 Ah at 12 V for a reliable power supply with minimal space requirements.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Ideal for installation in enclosures with limited space.Flexible installation: Operation is possible in all positions, except for permanent overhead installation.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1250A delivers a nominal capacity of 5.2 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation but is also suitable for applications with occasional charging and discharging cycles. Its field of application ranges from alarm systems and UPS units to mobile medical equipment, where a constant and failure-proof power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1250A is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables a long shelf life with high operational readiness. The robust ABS plastic housing provides excellent protection from shocks and vibrations.Features  ModelVision CP1250A Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)5.2 (at 20h rate) Maximum discharge current78A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.8 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1250A lead-acid batteryFor which applications is the CP1250A suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1250A?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1250A is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), the capacity (approx. 5Ah), the dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charge current: The charging current should not exceed 1.5 A to maximise the battery's service life.What does the connection type Faston 187 mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, allowing quick and tool-free installation.

The Vision CP1232 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 3.2 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and reliable power supply for a wide variety of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a GlanceCompact energy: 3.2 Ah capacity at 12 V for reliable power supply in a compact size.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Completely sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Provides stable voltage and low self-discharge.Flexible installation: Can be operated in all positions except for continuous upside-down operation.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant equipment.Powerful Performance for Versatile ApplicationsThe Vision CP1232 delivers a nominal capacity of 3.2 Ah during a 20-hour discharge. It is optimised as a general purpose battery for parallel standby operation, but is also suitable for applications with occasional charge and discharge cycles. Its range of application extends from alarm systems and UPS systems to mobile medical devices where a constant and fail-safe power supply is essential.Robust Technology for Demanding EnvironmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1232 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3% per month allows for long storage with high operational readiness. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1232 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)3.2 (at 20h rate) Maximum discharge current48A (for 5 seconds) Charge voltage (float charge)13.5V - 13.8V Charge voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)ca. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1232 lead-acid batteryFor which applications is the CP1232 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model building and hobby applications Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is necessary and it is leak-proof.What is the service life of the CP1232?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1232 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (3.2Ah), dimensions and connection type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charging: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.96 A to maximise battery life.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat blade connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables quick and tool-free installation. 

The Vision 6FM75TDX is a high-performance, cycle-proof and valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 75 Ah capacity. Designed for demanding cyclic applications, this battery combines maintenance-free AGM technology with a robust design. It offers a reliable and long-lasting energy solution for applications where repeated charging and discharging is a daily occurrence, such as in solar technology, mobile applications or rehabilitation technology.Highlights at a glanceHigh cycle stability: Developed for demanding cyclic use with a long service life.Strong capacity: 75 Ah at 12 V for long-lasting and reliable power supply.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after longer periods of disuse.Flexible installation: Operation is possible in all positions, with the exception of continuous upside-down use.Robust construction: The durable ABS plastic housing reliably protects the battery against mechanical impact.Reliable energy for demanding cyclesThe Vision 6FM75TDX has been specially optimised for cyclic operation. It delivers a nominal capacity of 75 Ah on a 20-hour discharge (C20). Its particular strength lies in its ability to be repeatedly deeply discharged and recharged without significant loss of capacity. This makes it the ideal choice for solar installations, electric vehicles and other mobile power supplies that require constant and reliable performance.Advanced technology for maximum longevityThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, where the electrolyte is contained in a glass fibre mat, the 6FM75TDX is fully sealed and maintenance-free. This not only prevents leaks, but also enables efficient gas recombination within the cell. The battery features low internal resistance, allowing high current draw. The low self-discharge rate ensures that the stored energy is preserved for long periods, which is particularly advantageous for seasonally used equipment.Features ModelVision 6FM75TDX Cyclic Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)75 (at 20h rate) Maximum discharge current750A (for 5 seconds) Charge voltage (float)13.6V - 13.8V Charge voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 600 cycles at 80% depth of discharge Dimensions (L/W/H, mm)260 x 168 x 214 Weight (kg)approx. 23.5 ConnectionM6 internal thread CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision 6FM75TDX lead-acid batteryFor which applications is the Vision 6FM75TDX suitable?This battery is specially designed for cyclic applications and is excellently suited for:Solar and photovoltaic off-grid systemsMotorhomes, caravans and boatsElectric wheelchairs and mobility scootersCleaning machines and automated guided vehicles (AGVs)Uninterruptible power supplies (UPS) with high cycle requirementsWhat does the term "cycle-proof" mean?Cycle-proof means that the battery is designed to be frequently and deeply discharged and then fully recharged. Unlike a conventional starter battery, which is designed for short, high current surges, a cycle-proof battery retains its capacity over many of these charge and discharge cycles.Is the battery completely maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.How should the battery be charged to maximise its service life?For maximum service life, we recommend using a good quality charger with an IUoU charging profile suitable for AGM batteries. The charging voltage should be between 14.4 V and 15.0 V in cyclic operation at 20 °C. The maximum charging current should not exceed 22.5 A.Can I connect several of these batteries together?Yes, you can connect several Vision 6FM75TDX batteries in series to increase the voltage (e.g. two for a 24 V system), or in parallel to increase the capacity. Please ensure that you only connect batteries of the same type, age and state of charge.What storage conditions and temperature ranges apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CAlways store the battery fully charged in a cool, dry place. Due to the low self-discharge rate, recharging is only required every six months during longer storage.

The Vision CP12240DX is a high-performance, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 24 Ah. This battery has been specially developed for demanding cyclical applications where regular and deep discharge is the order of the day. Equipped with robust, maintenance-free AGM technology, it is the ideal energy source for mobile applications in rehabilitation technology, for electric vehicles or in the leisure sector.Highlights at a glanceHigh cycle stability: Developed for a long service life with repeated, deep discharge and recharging.High capacity: 24 Ah at 12 V for a long-lasting and reliable power supply for mobile consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High power density: Offers a lot of energy in a compact and widely used housing format.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: Enables longer shelf life without significant loss of capacity.High performance for cyclic applicationsThe Vision CP12240DX reliably delivers a capacity of 24 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it a high resistance to the stresses of constant charging and discharging. This makes it the perfect choice for electric wheelchairs, golf caddies, e-scooters and other electric vehicles where maximum cycling and reliability are important.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, in which the electrolyte is securely bound in a glass fibre fleece, the CP12240DX is completely sealed, leak-proof and vibration-resistant. The low internal resistance enables efficient energy output even at higher currents. The housing made of robust ABS plastic reliably protects the internal components from mechanical stress in everyday mobile use and ensures a long and safe service life.Battery features  ModelVision CP12240DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 2000 cycles at 30% depth of discharge Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 7.8 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240DX lead-acid batteryWhat applications is the CP12240DX suitable for?The battery is ideal for a variety of demanding cyclic applications:Electric wheelchairs, mobility scooters and scootersGolf caddies and other light electric vehiclesMedical devices such as patient liftsMobile cleaning machinesMarine and camping applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage in any position.What is the difference to a standard AGM battery?The CP12240DX is designed as a cycle-proof battery. It uses reinforced lead plates and special additives that make it more resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby operation (e.g. in UPS systems) and would lose capacity more quickly during cyclical use.Can the battery be installed flexibly?Yes, the battery can be operated in all positions with the exception of a permanently upside down position. This enables flexible installation in a wide range of devices and vehicles.What are the charging parameters for this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Float charge voltage (20 °C): approx. 13.5 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 7.2 A. The use of a suitable charger is crucial for a long service life.Can two of these batteries be connected to form a 24V system?Yes, you can easily connect two CP12240DX batteries in series to create a 24V system. This is a very common configuration in electric wheelchairs and scooters. Please always use two new, identical batteries for this.