Saft Lithium round cell LS14500 2PF with 3.6 V and 2.6 Ah

The Tadiran SL-360PT from the iXtra series is a primary lithium thionyl chloride battery in the widely used size AA (Mignon). It was specially developed for applications requiring a long service life in combination with a moderate current load capacity. This version comes pre-assembled with axial pins for flexible and secure solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceReady to install: With robust, axial pins for direct solder mounting.Optimised for moderate loads: High capacity and stable voltage even with medium current demand.Very high capacity: 2.4 Ah for maximised and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PT was specifically developed for applications in which longevity and improved power delivery are crucial. The axial pins enable fixed and vibration-proof integration without a battery holder. Main areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial counters and measuring instruments (metering) that transmit data regularly.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PT are based on Tadiran's proven design. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces total operating costs for your application.iXtra series: The technology for higher performanceTadiran's iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better performance with moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply in applications which regularly "wake up" to perform tasks. Features  ModelTadiran SL-360/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative ends of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and long-lasting solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is permanently soldered and a long service life with regular power demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-360PR from the iXtra series is a primary lithium thionyl chloride battery in the widely used AA (Mignon) format. It was specially developed for applications requiring a long service life combined with moderate current capacity. This version is pre-fitted with radial pins for specific and safe mounting on PCBs. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it offers the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceFor PCB mounting: Pre-fitted with radial pins for direct installation.Optimised for moderate loads: High capacity and stable voltage even with moderate current demand.Very high capacity: 2.4 Ah for maximally extended and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V throughout nearly its entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PR was purpose-designed for applications where a long service life and improved power performance are crucial. The radial pins enable specific and space-saving placement on the PCB. Its main fields of application include wireless alarm and security systems, GPS tracking modules, professional two-way radios, data loggers as well as industrial meters and measuring devices (metering) that regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PR are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal, which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of inherent safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra series: The technology for higher performanceThe Tadiran iXtra series is designed to provide enhanced voltage stability under load. Compared to the standard series (SL-700), which is optimised for ultra-low continuous current, the SL-300 series performs better for medium load requirements and pulse currents. As a result, the passivation effect is impressed more quickly, delivering a more stable power supply in applications that "wake up" regularly to perform tasks. Features ModelTadiran SL-360/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does connection with "radial pins" mean?In contrast to axial connections, which exit centrally from the poles, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific PCB layouts and ensures particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers a more stable voltage under load. In contrast, the SL-700 series is designed for absolute long-term use with minimal continuous current, such as in pure memory-backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered in and a long service life with regular current demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can cause overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage loss under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Saft LS14500 3PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2) in AA size, developed for reverse polarity-proof installation in demanding electronics. It is based on the powerful LS14500 cell and is equipped with three axial solder pins that ensure clear positioning on the circuit board. With a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, it provides an extremely reliable long-term energy solution for safety-critical industrial applications.Highlights at a glanceReverse polarity-proof: Three axial solder pins (3PF) for error-free circuit board assemblyHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely durable: Very low self-discharge of less than 1 % per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for safety-critical electronicsThe Saft LS14500 3PF was specially developed for use in professional electronics where a long-lasting and absolutely reverse-polarity-proof energy source is required. Thanks to the 3-pin configuration, it is ideally suited for board mounting in memory backup systems, real-time clocks (RTC), industrial control units (PLC), meters, and complex sensors where incorrect installation must be ruled out.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage, and has a non-flammable electrolyte. This significantly increases operational safety. The LS14500 3PF is compliant with the IEC 60086-4 safety standard and UL certified, making it ideally suited for demanding applications.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers stable voltage until the end of the discharge cycle. The robust design reliably protects the cell from corrosion and mechanical stresses, thus ensuring the functionality of your application throughout the product's entire service life. Characteristics  ModelSaft LS14500 3PF TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection3 radial pins (3PF) RechargeableNo  FAQs about the Saft LS14500 3PF lithium round cellWhat does the designation 3PF mean and what is the purpose of the third pin?The designation 3PF means that the battery is equipped with three axial solder pins. Two pins serve as positive and negative terminals. The third pin serves as a mechanical coding. This ensures that the battery can only be mounted in the correct orientation on the circuit board, providing effective reverse polarity protection.Is the Saft LS14500 3PF rechargeable?No, the LS14500 3PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous, damages the cell and can lead to leakage or deflagration.How does the 3PF differ from the 2PF version?Both versions are based on the same powerful LS14500 cell. The difference is in the number of connections. The 3PF version offers mechanical reverse polarity protection due to the additional third pin, which the 2PF version does not have. The choice depends on the safety requirements and circuit board layout of the application.Can this battery be used in normal devices for AA batteries?No, this battery is intended exclusively for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than twice as high as that of a conventional 1.5 V AA battery. In addition, the solder pins prevent the use in standard battery holders.For which applications is this version particularly suitable?The 3PF version is ideal for safety-critical applications where incorrect soldering of the battery could cause serious damage to the electronics. It is often used in high-quality industrial controls, medical devices, and long-life security systems.

The Tadiran SL-760PR is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimum self-discharge. This version is pre-configured with radial pins (+/- 1 pin) for the direct and secure mounting on PCBs. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.For PCB mounting: Pre-configured with radial pins (+/- 1 pin) for direct installation.High capacity: 2.2 Ah in standardised AA (Mignon) format.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-760PR was specifically developed for long-term applications with low continuous current, in which the battery is permanently integrated into the electronics. The radial pins enable a specific and space-saving arrangement on the PCB. Its primary areas of application include memory backups (RTC, CMOS) in industrial control systems (PLC), metering technology (metering for water, gas, electricity) as well as long-life security technology and alarm systems in the common AA format.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760PR are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, reducing maintenance costs and the total operating costs of your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to an absolute minimum, enabling extremely long storage and operational capability. This ensures that energy is reliably available even after many years. Features  ModelTadiran SL-760/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit from the centre of the terminals, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current demand.For which devices is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered and an extremely long service life is decisive. Typical applications are meters, industrial computers, alarm systems and long-life sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or rupture of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first use, it can lead to a short voltage delay. This should be considered in circuit design for applications that require current immediately after activation.