Saft

The Saft LS14250 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2), configured with U-shaped solder terminals for flexible and robust mounting. This special version is based on the proven LS14250 cell and offers a nominal voltage of 3.6 V as well as a capacity of 1.2 Ah. Thanks to its extremely low self-discharge and high reliability, it is the ideal power source for durable industrial electronics where a secure and long-lasting connection is required.Highlights at a glanceFlexible mounting: U-shaped solder terminals (LF-U) for versatile installation positionsPowerful: 1.2 Ah capacity at 3.6 V for persistent power supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage throughout the entire service lifeRobust: Hermetically sealed stainless steel housing for highest operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for versatile industrial applicationsThe Saft LS14250 LF-U was developed for use in professional devices where the battery is not soldered directly onto a board but requires a flexible connection. The U-shaped solder terminals enable a secure connection with cables or in special battery holders. Typical application areas include memory backup systems, alarm systems, medical devices, meters and industrial control units that require a reliable and long-lasting power supply.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed to minimise the risk of leakage current, and it has a non-flammable electrolyte which significantly increases operational safety. The LS14250 LF-U conforms to the IEC 60086-4 safety standard and is UL certified. This underlines its suitability for demanding applications that require maximum reliability.Robust Li-SOCl2 technology for industrial useLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after long storage. The robust construction with stainless steel housing and glass-to-metal seal protects the cell reliably against corrosion and environmental influences, thus ensuring the functionality of your application throughout the entire product lifecycle. Features  ModelSaft LS14250 LF-U TechnologyLithium Thionyl Chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionSolder tag (U-shape) RechargeableNo  FAQs on the Saft LS14250 LF-U lithium cylindrical cellWhat does the designation LF-U mean?The designation LF-U describes the type of connection of the battery. "LF" stands for solder tag and the "U" specifies their shape as U-shaped solder tags. These allow cables to be soldered or for use in certain holders.Is the Saft LS14250 LF-U rechargeable?No, the LS14250 LF-U is a lithium primary battery and must under no circumstances be recharged. Attempting to recharge it is dangerous and can cause destruction of the cell, leakage, or even explosion.For which applications is this version with solder connections suitable?This version is ideal for applications where the battery is not plugged directly onto a circuit board. It is often used to replace older batteries with soldered cables or for devices requiring a flexible, wired connection to the power supply.What is the difference to the versions with pins (e.g. 2PF)?While versions with pins (PF) are designed for direct mounting in suitably prepared holes on a circuit board, solder connections (LF-U) provide more flexibility. Cables of various lengths can be soldered on, allowing the battery to be positioned freely inside the device housing.How should the LS14250 LF-U be correctly stored and disposed of?The battery should be stored in a dry and cool place to ensure minimal self-discharge. As a lithium battery, it is subject to special disposal regulations and must be taken to the relevant municipal collection points or specialist retailers. Disposal in household waste is not permitted.

The Saft LS14250 with Z solder tag is a high-performance lithium thionyl chloride battery (Li-SOCl2), designed for horizontal mounting on printed circuit boards. This version is based on the reliable LS14250 cell and offers a nominal voltage of 3.6 V and a capacity of 1.2 Ah. The specially shaped Z solder terminals enable a flat and space-saving installation. Thanks to its extremely low self-discharge, it is the ideal energy source for long-life industrial electronics.Highlights at a GlanceFlat mounting: Z-shaped solder terminals for horizontal board mountingPowerful: 1.2 Ah capacity at 3.6 V for long-lasting power supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage over the entire service lifeRobust: Hermetically sealed stainless steel case for the highest operational safetyVersatile: Usable over a wide temperature range from -60 °C to +85 °CPowerful for Compact Industrial ApplicationsThe Saft LS14250 with Z solder tag was specially developed for use in professional devices where low overall height of components is critical. The Z-shaped terminals make it possible to solder the battery flat directly to the PCB, allowing for very flat device designs. It is excellent for memory backup systems, real-time clocks, meters, sensors and compact industrial assemblies.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed to minimise the risk of current leakage, and contains a non-flammable electrolyte, significantly increasing operational safety. The LS14250 conforms to the IEC 60086-4 safety standard and is UL certified. This underlines its suitability for demanding applications where maximum reliability is crucial.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after long storage times. The robust construction with stainless steel casing and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus ensuring the functionality of your application over its entire product life. Technical Features  ModelSaft LS14250 (Z solder tag) TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. Continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionZ solder tag RechargeableNo  FAQs about the Saft LS14250 with Z solder tagWhat is the advantage of a Z solder tag?The Z-shaped solder tag is specially designed for horizontal (flat) mounting of the battery on a printed circuit board. This allows a very low installation height and is ideal for compact electronic devices where height space is limited.Is the Saft LS14250 with Z solder tag rechargeable?No, this is a lithium primary battery that is not rechargeable. Any attempt to recharge the battery is dangerous and may lead to destruction of the cell, leakage or explosion.How is this version different from one with axial pins?While versions with axial pins (e.g. 2PF) are designed for vertical mounting in holes on a printed circuit board, the version with Z solder tag is designed exclusively for horizontal surface mounting by soldering. The choice depends on the board layout and the space available.For which applications is this battery particularly suitable?This version is ideal for all applications where a long-life backup battery is required and at the same time a very flat design is to be realised. Examples include compact data loggers, flat sensor modules or memory modules in notebooks and industrial computers.How should the LS14250 with Z solder tag be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be handed in at appropriate municipal collection points or in specialist shops. Disposal in household waste is not permitted.

The Saft LS14250 2PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2), developed for demanding industrial applications. It combines the proven performance of the LS14250 cell with robust axial connection wires (pins) for secure and permanent mounting directly on circuit boards. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it offers an exceptionally reliable long-term energy solution, characterised by minimal self-discharge and high operational reliability.Highlights at a glanceReady to install: Two axial connection wires (2PF) for direct solder mountingPowerful: 1.2 Ah capacity at 3.6 V for long-lasting power supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage over the entire service lifeRobust: Hermetically sealed stainless steel housing for maximum safetyVersatile: Can be used in a wide temperature range from -60 °C to +85 °CPowerful for demanding electronicsThe Saft LS14250 2PF was specially designed for use in professional electronics where a fixed and vibration-proof power source is required. Thanks to the integrated axial pins, it is ideal for circuit board mounting in measuring devices, sensors, memory backup systems (memory back up), alarm systems and industrial control units (PLC). Its high energy density and compact 1/2 AA form factor enable space-saving and efficient integration into your devices.Efficiency and safety with a systemThe proven lithium thionyl chloride technology guarantees reliable energy delivery over many years. The cell is hermetically sealed to minimise the risk of current leakage and features a non-flammable electrolyte, which significantly increases operational safety. The LS14250 2PF complies with IEC 60086-4 safety standard and is UL certified, underscoring its suitability for demanding industrial applications.Robust Li-SOCl2 technology for industryThe lithium thionyl chloride chemistry stands for superior energy density and long service life. Compared to other battery technologies, it offers stable voltage right up to the end of the discharge cycle. The robust construction with stainless steel housing and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus ensuring the functionality of your application over the entire product lifespan. Features  ModelSaft LS14250 2PF TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 Connection2 radial pins (2PF) RechargeableNo  FAQs about the Saft LS14250 2PF lithium round cellWhat does the designation 2PF mean?The designation 2PF refers to the configuration of the battery. It means that the cell is factory-fitted with two robust, axial connection wires (pins). These allow simple and secure solder mounting directly onto a circuit board.Is the Saft LS14250 2PF rechargeable?No, the LS14250 2PF is a lithium primary battery and must not be charged under any circumstances. Attempting to charge it is dangerous and can result in destruction of the cell, leakage or an explosion.For which applications is this battery with solder pins suitable?This version is especially designed for permanently installed applications where the battery is soldered directly onto a circuit board. Typical uses are memory retention (memory back up) for control systems, security technology, industrial sensors and counters.How long is the service life of the LS14250 2PF in operation?The service life strongly depends on the application, the current draw and the ambient temperature. However, thanks to the extremely low self-discharge, the battery can reliably deliver energy for over 10 years in low power applications.How should the LS14250 2PF be stored and disposed of?The battery should be stored in a dry and cool place to keep self-discharge as low as possible. As a lithium battery, it must not be disposed of with household waste but must be taken to special battery collection points.

The Saft LS14250 3PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2) designed for reverse polarity safe mounting in demanding electronic assemblies. It is based on the proven LS14250 cell and is equipped with three axial connection wires (pins), which ensure clear and secure positioning on the printed circuit board. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it offers an extremely reliable long-term energy solution for industrial applications.Highlights at a glanceReverse polarity safe: Three axial connection wires (3PF) for error-free solder mountingPowerful: 1.2 Ah capacity at 3.6 V for enduring power supplyExtremely long-lasting: Very low self-discharge of under 1% per yearReliable: Constant and stable operating voltage throughout the battery's lifetimeRobust: Hermetically sealed stainless steel case for highest safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for safety-critical electronicsThe Saft LS14250 3PF was specially developed for use in professional electronics, where a long-lasting and reverse polarity safe energy source is essential. Thanks to the 3 pin configuration, it is ideal for mounting on PCBs in safety-critical applications such as memory backup systems, real-time clocks (RTC), industrial control units (PLC), meters, and complex sensors. Its high energy density and the compact 1/2 AA design enable space-saving and secure integration.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable power delivery over many years. The cell is hermetically sealed to minimise the risk of leakage current and features a non-flammable electrolyte, which significantly increases operational safety. The LS14250 3PF complies with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for demanding applications where maximum reliability is required.Robust Li-SOCl2 technology for industryThe lithium thionyl chloride chemistry stands for superior energy density and a long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle. The robust construction with stainless steel case and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus ensuring the functionality of your application over the entire product life. Characteristics  ModelSaft LS14250 3PF TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 Connection3 radial pins (3PF) RechargeableNo  FAQs about the Saft LS14250 3PF lithium round cellWhat does the designation 3PF mean and what is the purpose of the third pin?The designation 3PF means that the battery is equipped with three axial connection wires (pins). While two pins serve as positive and negative poles, the third pin provides mechanical coding. This prevents incorrect insertion or soldering of the battery on the PCB and protects the electronics from damage caused by reverse polarity.Is the Saft LS14250 3PF rechargeable?No, the LS14250 3PF is a lithium primary battery that is not rechargeable. Any attempt to recharge the battery poses a significant safety risk and can destroy the cell.In which devices is this special 3 pin version used?This version is mainly used in industrial and safety-related electronics, where incorrect installation of the battery must be avoided at all costs. Typical applications are long-life memory buffering (SRAM, RTC) in control units, medical devices, and complex measurement systems.How does the 3PF differ from the 2PF version?Both versions are based on the same battery cell and have identical electrical properties. The only difference is the number of connection wires. The 3PF version has an additional mechanical reverse polarity protection thanks to the third pin, which the 2PF version does not have.How should the LS14250 3PF be stored and disposed of properly?The battery should be stored in a dry and cool place to ensure minimal self-discharge. As a lithium battery, it is subject to special disposal regulations and must be taken to the relevant municipal collection points or a specialised dealer. Disposal with household waste is not permitted.

The Saft LS14250 3PFRP is a highly specialised lithium thionyl chloride battery (Li-SOCl2) designed for reverse polarity safe and defined assembly in demanding electronic assemblies. It is based on the proven LS14250 cell and is fitted with three axial connection wires (pins) in a specific arrangement. The suffix RP (Reversed Position) denotes a pin configuration rotated by 180 degrees compared to the standard. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it provides an extremely reliable long-term energy solution for industrial applications.Highlights at a GlanceSpecific mounting: 3 axial pins in reversed position (3PFRP) for defined mounting positionsReverse polarity safe: The 3 pin arrangement prevents incorrect solderingPowerful: 1.2 Ah capacity at 3.6 V for enduring energy supplyExtremely long-lasting: Very low self-discharge of less than 1% per yearReliable: Constant and stable operating voltage throughout the entire service lifeRobust: Hermetically sealed stainless steel housing for maximum safetyPowerful for specific industrial applicationsThe Saft LS14250 3PFRP was specially developed for use in professional electronics, where a durable and mechanically precisely defined energy source is essential. Thanks to the specific 3 pin configuration, it is ideal for PCB mounting in memory backup systems (memory back up), real time clocks (RTC), industrial controller units (PLC) and counters, whose layout requires this special pin configuration. Its high energy density and compact 1/2 AA form factor enable space-saving and process-safe integration.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable power delivery over many years. The cell is hermetically sealed to minimise the risk of leakage current and features a non-flammable electrolyte, which significantly increases operational safety. The LS14250 3PFRP complies with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for demanding applications where maximum reliability is essential.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and long service life. Compared to other battery technologies, it offers a stable voltage level up to the end of the discharge cycle. The robust design with stainless steel housing and glass-metal seal reliably protects the cell from corrosion and environmental influences, thus safeguarding the functionality of your application throughout the entire product service life. Characteristics  ModelSaft LS14250 3PFRP TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 Connection3 radial pins (RP) RechargeableNo  FAQs about the Saft LS14250 3PFRP lithium round cellWhat does the designation 3PFRP mean?The designation 3PFRP describes the assembly of the battery. "3PF" stands for three axial solder pins which ensure reverse polarity safety. The suffix "RP" stands for "Reversed Position" and means that the pins are arranged 180 degrees rotated compared to the standard 3PF version. This variant is required for specific PCB layouts.Is the Saft LS14250 3PFRP rechargeable?No, the LS14250 3PFRP is a lithium primary battery and is not rechargeable. Any attempt to charge the battery poses a significant safety risk and can lead to the destruction of the cell.Can I replace a 3PFRP version with a normal 3PF version?No, a direct replacement is generally not possible. The reversed pin arrangement of the 3PFRP version is mechanically coded and only fits on PCBs that are specifically designed for this configuration. Please check your application’s requirements carefully.For which applications is this special 3PFRP version required?This version is used in industrial electronics where the PCB layout requires the battery to be mounted in a rotated position to, for example, save space or optimise track routing. Typical areas of application include durable memory buffers in controllers, counters, and medical devices.How must the LS14250 3PFRP be appropriately stored and disposed of?The battery should be stored in a dry and cool place to ensure minimal self-discharge. As a lithium battery, it is subject to specific disposal regulations and must be handed in at the relevant municipal collection points or at specialist retailers. Disposal via household waste is not permitted.

The Saft LS14250 CNA is a highly specialised lithium thionyl chloride battery (Li-SOCl2), factory-assembled with flexible axial wire connections. This version is based on the powerful LS14250 cell and offers a nominal voltage of 3.6 V and a capacity of 1.2 Ah. The wire connections allow for versatile and straightforward integration into applications requiring a wired energy solution. Thanks to its extremely low self-discharge, it is the ideal choice for long-lasting industrial applications.Highlights at a glanceReady to connect: Axial wire connections for flexible and direct wiringPowerful: 1.2 Ah capacity at 3.6 V for enduring power supplyExtremely long-lasting: Very low self-discharge of under 1% per yearReliable: Constant and stable operating voltage over the entire lifespanRobust: Hermetically sealed stainless-steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for flexible industrial applicationsThe Saft LS14250 with axial wire connection was developed for use in professional devices where flexible positioning of the battery within the housing is required. The attached wires allow for an easy connection to contacts on the mainboard without the need to place the battery itself on the board. It is ideally suited for memory backup systems, alarm systems, counters, localisation systems, and industrial control units.Efficiency and guaranteed safetyProven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed to minimise the risk of leakage, and has a non-flammable electrolyte, significantly increasing operational safety. The LS14250 conforms to safety standard IEC 60086-4 and is UL certified. This underlines its suitability for demanding applications where maximum reliability is required.Robust Li-SOCl₂ technology for industryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage up to the end of the discharge cycle, even after long storage times. The robust construction with stainless steel housing and glass-to-metal seal reliably protects the cell against corrosion and environmental influences and thus ensures the functionality of your application throughout the product's life. Features  ModelSaft LS14250 (axial wire) TechnologyLithium-thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionAxial wire connection RechargeableNo  FAQs about the Saft LS14250 with axial wire connectionWhat is the advantage of axial wire connections?Axial wire connections offer maximum flexibility when installing. The battery does not have to sit directly on a PCB, but can be placed at any suitable location in the housing and connected to the electronics using the wires. This is especially useful when PCB space is limited.Is the Saft LS14250 with wires rechargeable?No, this is a lithium primary battery, which is not rechargeable. Any attempt to recharge the battery is dangerous and can cause cell destruction, leakage, or even an explosion.How does this version differ from a standard LS14250 cell?The battery cell itself is identical to the standard LS14250. The only difference lies in the assembly. This version comes from the factory with permanently connected axial wires, eliminating the need for manual soldering during installation and ensuring a reliable connection.Can the wires be extended or shortened?Yes, the wires can be shortened as required by your application. Extension is also possible but should be done professionally with appropriate connectors or solder points and suitable insulation to ensure electrical safety.How should the LS14250 with wire connection be correctly disposed of?Being a lithium battery, it is subject to special disposal regulations. It must be handed in at appropriate municipal collection points or authorised specialist dealers. Disposal with household waste is not permitted. Before disposal, the wire ends should be insulated to prevent short circuits.

The Saft LS14500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in the standard AA size, developed for demanding industrial applications with high energy demand. It offers a nominal voltage of 3.6 V and a superior capacity of 2.6 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications that demand maximum reliability and long operating life.Highlights at a GlanceHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long storageRobust: Hermetically sealed stainless steel case for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for Versatile Industrial ApplicationsThe Saft LS14500 in AA format is the perfect energy solution for a wide variety of professional and industrial devices. Its high energy density makes it the first choice for wireless alarm systems, memory backup systems (memory back up), gas, water or electricity meters (metering), professional electronics as well as tracking systems. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed with a glass to metal seal to minimise the risk of leakage, and features a non-flammable electrolyte, which significantly increases operational safety. The LS14500 is compliant with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for safety-critical applications.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage down to the end of the discharge cycle, even after long storage periods. The robust construction reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application throughout the entire product lifetime. Features  ModelSaft LS14500 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal Voltage (V)3.6 Capacity (mAh)2600 Max. Continuous Discharge Current50 mA Self-dischargeapprox. 1% per year Operating Temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionStandard (industrial head) RechargeableNo  FAQs on the Saft LS14500 Lithium Cylindrical CellCan I replace a standard 1.5 V AA battery with a Saft LS14500?No, definitely not. The Saft LS14500 has a voltage of 3.6 V, which is more than double that of an ordinary alkaline or lithium AA battery (1.5 V). Using it in a device designed for 1.5 V batteries would immediately and irreparably damage the electronics.Is the Saft LS14500 rechargeable?No, the LS14500 is a lithium primary battery and must not under any circumstances be recharged. Any attempt to do so is dangerous and can lead to destruction of the cell, leakage or explosion.For which applications is the LS14500 particularly well suited?It is ideal for professional applications with low continuous current, which must function reliably for many years. These include, in particular, battery-operated sensors, meters (electricity, gas, water), security technology, memory buffering (memory back up) and GPS trackers.What is the difference to the Saft LS14250?The principal difference is in the size and capacity. The LS14500 is AA size and offers a capacity of 2.6 Ah. The LS14250, on the other hand, is half size (1/2 AA) and consequently has a lower capacity of 1.2 Ah. The choice depends on the energy requirement and available space in the application.How should the LS14500 be correctly disposed of?As a lithium battery it is subject to special disposal regulations. It must be given to appropriate municipal collection points or specialist retailers. Disposal with household waste is not permitted.

The Saft LS14500 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, which is assembled with U-shaped solder tags for flexible and robust mounting. This special version is based on the powerful LS14500 cell and offers a nominal voltage of 3.6 V as well as a high capacity of 2.6 Ah. Thanks to its extremely low self-discharge and high reliability, it is the ideal energy source for long-lasting industrial electronics.Highlights at a glanceFlexible mounting: U-shaped solder tags (LF-U) for versatile installation positionsHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1% per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Can be used in a wide temperature range from -60°C to +85°CPowerful for versatile industrial applicationsThe Saft LS14500 LF-U was designed for use in professional devices where the battery is not soldered directly onto a circuit board but requires a flexible connection. The U-shaped solder tags enable a secure connection by means of cables or in special battery holders. Typical areas of application include memory backup systems, alarm systems, medical devices, counters and industrial control units that require a reliable and long-lasting power supply.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by means of a glass-to-metal seal to minimise the risk of leakage current, and it has a non-flammable electrolyte, which significantly increases operational safety. The LS14500 LF-U complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level right to the end of the discharge cycle. The robust construction reliably protects the cell against corrosion and mechanical stress, thus ensuring the functionality of your application throughout the entire product service life. Characteristics  ModelSaft LS14500 LF-U TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionSolder tag (U-shape) RechargeableNo  FAQs about the Saft LS14500 LF-U lithium round cellWhat does the designation LF-U mean?The designation LF-U describes the type of connections of the battery. "LF" stands for solder tag and the "U" specifies their shape as U-shaped solder tags. These allow cables to be soldered or used in certain holders, providing a high degree of flexibility during installation.Is the Saft LS14500 LF-U rechargeable?No, the LS14500 LF-U is a lithium primary battery and must never be recharged under any circumstances. Any attempt at charging is dangerous, damages the cell and can lead to leakage or deflagration.What is the difference compared to versions with pins (e.g. 2PF)?While versions with pins (PF) are designed for direct mounting in suitable holes on a circuit board, the U-shaped solder tags (LF-U) offer more flexibility. Cables of different lengths can be soldered to them to position the battery freely in the device housing.Can this battery be used in normal devices for AA batteries?No, this battery is exclusively intended for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than twice that of a conventional 1.5 V AA battery.For which applications is this version with solder tags suitable?This version is ideal for applications where the battery is not mounted directly on a circuit board. It is often used to replace older batteries with soldered cables or in devices that require a flexible, wired connection to the power supply.

Saft Lithium round cell LS14500 with Z solder tab, 3.6 V and 2.6 Ah

Saft Lithium round cell LS14500 2PF with 3.6 V and 2.6 Ah

The Saft LS14500 3PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2) in AA size, developed for reverse polarity-proof installation in demanding electronics. It is based on the powerful LS14500 cell and is equipped with three axial solder pins that ensure clear positioning on the circuit board. With a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, it provides an extremely reliable long-term energy solution for safety-critical industrial applications.Highlights at a glanceReverse polarity-proof: Three axial solder pins (3PF) for error-free circuit board assemblyHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely durable: Very low self-discharge of less than 1 % per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for safety-critical electronicsThe Saft LS14500 3PF was specially developed for use in professional electronics where a long-lasting and absolutely reverse-polarity-proof energy source is required. Thanks to the 3-pin configuration, it is ideally suited for board mounting in memory backup systems, real-time clocks (RTC), industrial control units (PLC), meters, and complex sensors where incorrect installation must be ruled out.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage, and has a non-flammable electrolyte. This significantly increases operational safety. The LS14500 3PF is compliant with the IEC 60086-4 safety standard and UL certified, making it ideally suited for demanding applications.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers stable voltage until the end of the discharge cycle. The robust design reliably protects the cell from corrosion and mechanical stresses, thus ensuring the functionality of your application throughout the product's entire service life. Characteristics  ModelSaft LS14500 3PF TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection3 radial pins (3PF) RechargeableNo  FAQs about the Saft LS14500 3PF lithium round cellWhat does the designation 3PF mean and what is the purpose of the third pin?The designation 3PF means that the battery is equipped with three axial solder pins. Two pins serve as positive and negative terminals. The third pin serves as a mechanical coding. This ensures that the battery can only be mounted in the correct orientation on the circuit board, providing effective reverse polarity protection.Is the Saft LS14500 3PF rechargeable?No, the LS14500 3PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous, damages the cell and can lead to leakage or deflagration.How does the 3PF differ from the 2PF version?Both versions are based on the same powerful LS14500 cell. The difference is in the number of connections. The 3PF version offers mechanical reverse polarity protection due to the additional third pin, which the 2PF version does not have. The choice depends on the safety requirements and circuit board layout of the application.Can this battery be used in normal devices for AA batteries?No, this battery is intended exclusively for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than twice as high as that of a conventional 1.5 V AA battery. In addition, the solder pins prevent the use in standard battery holders.For which applications is this version particularly suitable?The 3PF version is ideal for safety-critical applications where incorrect soldering of the battery could cause serious damage to the electronics. It is often used in high-quality industrial controls, medical devices, and long-life security systems.

The Saft LS14500 3PFRP is a highly specialised lithium thionyl chloride battery (Li-SOCl2) in AA size, developed for reverse polarity-proof and mechanically defined assembly. It is based on the powerful LS14500 cell and is equipped with three axial solder pins in a 180 degree reversed arrangement (Reversed Position). With a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, it offers an extremely reliable long-term energy solution for specific industrial applications.Highlights at a glanceSpecific assembly: 3 axial pins in reversed position (3PFRP) for defined installation orientationsReverse polarity-proof: The 3-pin arrangement excludes faulty solder assemblyHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely durable: Very low self-discharge of under 1% per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyPowerful for specific industrial applicationsThe Saft LS14500 3PFRP was specially developed for use in professional electronics where the PCB layout requires a rotated arrangement of the energy source. Thanks to the specific 3-pin configuration, it is ideal for fixed mounting in memory backup systems, real-time clocks (RTC), industrial control units (PLC), and meters whose layout is precisely matched to this battery version.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy delivery for many years. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and features a non-flammable electrolyte. This significantly increases operational safety. The LS14500 3PFRP complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long lifespan. Compared to other battery technologies, it offers stable voltage levels up to the end of the discharge cycle. The robust construction reliably protects the cell from corrosion and mechanical stress, thus ensuring the functionality of your application throughout the entire product lifespan. Characteristics  ModelSaft LS14500 3PFRP TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection3 radial pins (RP) RechargeableNo  FAQs about the Saft LS14500 3PFRP lithium round cellWhat does the designation 3PFRP mean?The designation "3PF" stands for three axial solder pins, which ensure reverse polarity protection. The suffix "RP" stands for "Reversed Position" and means that the arrangement of the three pins is rotated 180 degrees compared to the standard 3PF version. This version is mandatory for specific PCB layouts.Is the Saft LS14500 3PFRP rechargeable?No, the LS14500 3PFRP is a lithium primary battery and must under no circumstances be recharged. Any attempt to charge is dangerous, damages the cell and may result in leakage or explosion.Can I replace a 3PFRP version with a normal 3PF version?No, a direct replacement is mechanically not possible. The reversed pin arrangement of the 3PFRP version is coded and only fits PCBs that are exactly designed for this configuration. Please carefully check the requirements of your application or the battery to be replaced.Can this battery be used in regular devices for AA batteries?No, this battery is designed exclusively for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than double that of a conventional 1.5 V AA battery. In addition, the solder pins prevent use in regular battery holders.For which applications is this special version required?The 3PFRP version is used in industrial electronics where the PCB layout requires the battery to be installed in a rotated position, for example to optimise trace routing or save space. It is often used in specific controllers, meters and medical devices.

The Saft LS14500 with axial wire connection is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, factory-assembled with flexible connection wires. This version is based on the powerful LS14500 cell and offers a nominal voltage of 3.6 V and a high capacity of 2.6 Ah. The wire connections enable versatile integration in applications that require a wired energy solution, ensuring a long and reliable operating life.Highlights at a glanceReady for connection: Axial wire connections for flexible and direct wiringHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for flexible industrial applicationsThe Saft LS14500 with axial wire connection was designed for use in professional devices where flexible positioning of the battery in the housing is required. The soldered wires allow easy connection to contacts on the main board without the need to place the battery itself on the board. It is ideal for memory backup systems, alarm systems, counters, localisation systems and industrial control units.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage currents and has a non-flammable electrolyte, which significantly increases operational safety. The LS14500 complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies it offers a stable voltage level until the end of the discharge cycle. The robust design reliably protects the cell against corrosion and mechanical stresses, thus ensuring the functionality of your application throughout the entire product service life. Features  ModelSaft LS14500 (axial wire) TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionAxial wire connection RechargeableNo  FAQs about the Saft LS14500 with axial wire connectionWhat is the advantage of axial wire connections?Axial wire connections offer maximum flexibility during installation. The battery does not have to sit directly on a board, but can be placed at any suitable location within the device's enclosure and then connected to the electronics via the wires. This is particularly useful when space on the PCB is limited.Is the Saft LS14500 with wires rechargeable?No, this is a lithium primary battery which is not rechargeable. Any attempt to recharge the battery is dangerous and can lead to destruction of the cell, leakage, or deflagration.How does this version differ from a standard LS14500 cell?The battery cell itself is identical to the standard LS14500. The difference lies only in the configuration. This version is factory-supplied with permanently connected axial wires, which eliminates the need for manual soldering during installation and ensures a process-reliable connection.Can this battery be used in standard devices for AA batteries?No, this battery is exclusively designed for professional electronics with an operating voltage of 3.6 V. The voltage is more than twice as high as a standard 1.5 V AA battery. Furthermore, the wires do not allow use in standard battery holders.Can the wires be shortened or lengthened?Yes, the wires can be shortened according to the requirements of your application. Extension is also possible, but should be carried out professionally with suitable connectors or solder joints and appropriate insulation to ensure electrical safety.

Saft Lithium battery LS 17330 3.6V 2.1Ah with axial terminals

The Saft LS17330 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in the compact 2/3 A size, developed for demanding industrial applications with high energy requirements. It offers a nominal voltage of 3.6 V and a high capacity of 2.1 Ah. Thanks to its extremely low self-discharge and robust construction, it’s the ideal choice for long-life applications where maximum reliability and long operating time are required in minimal space.Highlights at a glanceHigh energy density: 2.1 Ah capacity in the compact 2/3 A sizePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of under 1 % per yearReliable: Excellent response even after long storageRobust: Hermetically sealed stainless steel housing for highest operational safetyVersatile: Usable over a wide temperature range from -60 °C to +85 °CPowerful for compact industrial applicationsThe Saft LS17330 is the perfect energy solution for professional and industrial devices where space is limited. Its high energy density makes it the first choice for wireless alarm systems, memory backup systems (memory back up), gas or water meters (metering), professional electronics and tracking systems. Thanks to its ability to provide stable performance even at low temperatures, it ensures your devices work reliably under all conditions.Efficiency and guaranteed safetyProven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage and contains a non-flammable electrolyte, significantly increasing operational safety. The LS17330 is compliant with IEC 60086-4 safety standard and UL certified, confirming its suitability for safety-critical applications.Robust Li-SOCl2 technology for industryLithium thionyl chloride chemistry is synonymous with superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage up to the end of the discharge cycle, even after long storage periods. The robust construction reliably protects the cell from corrosion and environmental influences, ensuring your application functions throughout the entire product life. Features  ModelSaft LS17330 TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 A Nominal voltage (V)3.6 Capacity (mAh)2100 Max. continuous discharge current75 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 16.8 x 33.6 Weight (g)approx. 16 ConnectionStandard (industrial cap) RechargeableNo  FAQs about the Saft LS17330 lithium round cellWhat does the size 2/3 A mean?The 2/3 A size describes a cell that is shorter than a standard AA battery but has a slightly larger diameter. This compact shape makes a high energy density possible for applications with limited space.Is the Saft LS17330 rechargeable?No, the LS17330 is a lithium primary battery and under no circumstances may it be recharged. Attempting to recharge is dangerous and can result in cell destruction, leakage or an explosion.For which applications is the LS17330 particularly well suited?It is ideal for professional applications with low continuous current that must work reliably for many years and where little space is available. This mainly includes compact sensors, alarm systems, memory backup (memory back up) and GPS trackers.What is the difference to the Saft LS14500?The main difference is in the size and capacity. The LS17330 (2/3 A) is shorter and thicker than the LS14500 (AA). At 2.1 Ah, it offers a slightly lower capacity than the LS14500 (2.6 Ah). The choice depends on the available space and the energy needs of the application.How should the LS17330 be properly disposed of?As a lithium battery, it is subject to special disposal regulations. It must be taken to appropriate municipal collection points or specialist dealers. Disposal as household waste is not permitted.

The Saft LS17500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size A, which was developed for demanding industrial applications with very high energy requirements. It offers a nominal voltage of 3.6 V and an exceptionally high capacity of 3.6 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications where maximum reliability and a long, maintenance-free service life are required.Highlights at a glanceVery high capacity: 3.6 Ah in the A size for maximum runtimePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long periods of storageRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Can be used in a wide temperature range from -60 °C to +85 °CPowerful for energy-intensive applicationsThe Saft LS17500 is the perfect energy solution for professional and industrial devices that require a high amount of energy over a long period of time. Its high capacity makes it the first choice for meters for gas, water or electricity (metering), memory backup systems (memory back up), buoys, tracking systems and industrial control systems. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LS17500 is compliant with the IEC 60086-4 safety standard and UL certified, emphasising its suitability for safety-critical applications.Robust Li-SOCl2 technology for industrial applicationsLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after a long storage period. The robust design reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application over the entire product service life. Characteristics  ModelSaft LS17500 TechnologyLithium thionyl chloride (Li-SOCl₂) SizeA Rated voltage (V)3.6 Capacity (mAh)3600 Max. Continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 17.0 x 50.9 Weight (g)approx. 23 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Saft LS17500 lithium round cellWhat does size A mean?Size A describes a cell that has the same height as a standard AA battery, but has a larger diameter (approx. 17 mm compared to 14.5 mm). This larger diameter enables a significantly higher capacity.Is the Saft LS17500 rechargeable?No, the LS17500 is a lithium primary battery and must not be charged under any circumstances. Attempted charging is dangerous and can lead to destruction of the cell, leakage or deflagration.For which applications is the LS17500 particularly suitable?It is ideal for professional applications with high energy requirements and low continuous current that need to function independently for many years. These include, in particular, meters (smart metering), long-term data loggers, maritime buoys and sophisticated safety technology.What is the difference to the Saft LS14500?Both cells have the same height, but the LS17500 (size A) is thicker than the LS14500 (size AA). Due to the larger volume, the LS17500 with 3.6 Ah offers a significantly higher capacity than the LS14500 with 2.6 Ah and therefore enables longer runtimes.How should the LS17500 be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be taken to appropriate municipal collection centres or specialist retailers. Disposal with household waste is not permitted.

The Saft LSH14 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size C, specially developed for professional applications with high energy and power requirements. Thanks to its spiral electrode construction, it offers a nominal voltage of 3.6 V, a high capacity of 5.8 Ah, and the ability to deliver exceptionally high continuous and pulse currents. This makes it the ideal choice for demanding devices where fast and high energy output is crucial.Highlights at a GlanceHigh current carrying capacity: Developed for high continuous currents up to 1300 mAHigh capacity: 5.8 Ah for a long-lasting and powerful energy supplyHigh pulse capability: Reliable delivery of pulses up to 2500 mASpiral technology: Optimised for fast energy output with minimal voltage dropWide temperature range: Reliable use from -60 °C to +85 °CRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum Power for Demanding ApplicationsThe Saft LSH14 is the perfect energy solution for devices that require high performance either for short periods or permanently. It is ideally suited for use in emergency transmitters (ELT, EPIRB), military equipment, professional power tools, tracking systems with frequent data transmission, and other industrial applications where standard lithium batteries would reach their performance limits.Superior Spiral Technology for High CurrentsIn contrast to batteries with wound construction (bobbin type), the spiral design of the LSH14 maximises the active electrode surface. This enables a much faster chemical reaction and thus the delivery of significantly higher currents with consistently stable voltage behaviour. This ensures reliable and constant performance for your application even under high load.Efficiency and Guaranteed SafetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage, and has a non-flammable electrolyte, which significantly increases operational safety. The LSH14 conforms to the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with high power requirements. Characteristics  ModelSaft LSH14 TechnologyLithium thionyl chloride (high current) SizeC (Baby) Nominal Voltage (V)3.6 Capacity (mAh)5800 Max. continuous discharge current1300 mA Max. pulse current2500 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 51 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Saft LSH14 lithium round cellWhat does the suffix "LSH" mean for this battery?The "LSH" designation stands for the High Power series from Saft. These batteries use a spiral electrode design that enables them to deliver significantly higher currents than the "LS" (Low Self-discharge) series, which is designed for long-term applications with low current requirements.What is the main difference to the Saft LS26500?Although both batteries are size C, they are optimised for different purposes. The LSH14 is designed for high power and high current output (e.g. for motors or transmitters). The LS26500 is optimised for an extremely long life with very low current consumption (e.g. for memory back-up).Does the LSH14 have a higher self-discharge rate than an LS battery?Yes, due to the spiral construction with a larger electrode surface, the self-discharge of the LSH series tends to be somewhat higher than that of the LS series. Nevertheless, it offers excellent shelf life and lifespan for a high-performance battery.Which devices is the LSH14 particularly suitable for?It is ideal for devices that require high performance, such as emergency beacons, professional sensors with active transmission, medical devices, security and military technology, and other demanding industrial applications.Is the LSH14 rechargeable?No, the LSH14 is a lithium primary battery and must not under any circumstances be recharged. Any attempt to charge is dangerous and can lead to the destruction of the cell or an explosion.

Saft Lithium round cell LSH14 LF-U with 3.6 V and 5.8 Ah

Saft Lithium round cell LSH14 with Z solder tab, 3.6 V and 5.8 Ah

Saft Lithium round cell LS26500PLUS with 3.6 V and 8.5 Ah

The Saft LSH20 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, developed for the most demanding industrial applications with maximum energy and power requirements. Thanks to its spiral electrode design, it offers a nominal voltage of 3.6 V, an exceptionally high capacity of 13.0 Ah and the ability to deliver extremely high continuous and pulse currents. This makes it the ultimate choice for critical applications where maximum performance and reliability are required.Highlights at a glanceMaximum power: Developed for the highest continuous currents up to 1800 mAExtremely high capacity: 13.0 Ah in the D size for maximum runtime under loadHighest pulse capability: Reliable delivery of pulses up to 4000 mA (4 A)Spiral technology: Optimised for fast energy output with minimal voltage dipWide temperature range: Reliably usable from -60 °C to +85 °CRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for critical applicationsThe Saft LSH20 is the perfect energy solution for devices that require very high performance over a long period. It is ideal for use in emergency transmitters (ELT, EPIRB), military equipment such as radios, professional power tools, underwater applications, as support energy for high-performance backup systems, and in other industrial applications where no compromises can be made in terms of performance.Superior spiral technology for highest currentsIn contrast to batteries with bobbin-type construction, the spiral design of the LSH20 maximises the active electrode surface. This enables a significantly faster chemical reaction and thus the delivery of extremely high currents with stable voltage behaviour at the same time. This ensures reliable and constant performance of your application even under the highest load.Efficiency and guaranteed safetyThe cell is hermetically sealed by means of a glass-to-metal seal to minimise the risk of leakage current and features a non-flammable electrolyte, which significantly increases operational safety. The LSH20 complies with the IEC 60086-4 safety standard as well as being UL certified and is therefore suitable for safety-critical applications with the highest performance requirements. Features  ModelSaft LSH20 TechnologyLithium thionyl chloride (high current) SizeD (Mono) Nominal voltage (V)3.6 Capacity (mAh)13000 Max. continuous discharge current1800 mA Max. pulse current4000 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 100 ConnectionStandard (Industrial head) RechargeableNo  FAQs about the Saft LSH20 lithium round cellWhat does the suffix "LSH" mean for this battery?The designation "LSH" stands for the High Power series by Saft. These batteries use a spiral electrode design that enables them to deliver significantly higher currents than the "LS" (Low Self-discharge) series, which is designed for long-term applications with low power requirements.What is the main difference to the Saft LS33600?Although both batteries are size D, they are optimised for opposing purposes. The LSH20 is designed for maximum performance and extremely high current output (e.g. for motors or powerful transmitters) and has a capacity of 13.0 Ah. The LS33600 is optimised for an extremely long service life with very low power consumption and therefore offers a higher capacity of 17.0 Ah.Does the LSH20 have a higher self-discharge rate than an LS battery?Yes, due to the spiral construction with a larger electrode surface, the self-discharge of the LSH series is generally somewhat higher than that of the LS series. Nevertheless, it offers excellent storage capability and service life for a high-performance battery.For which devices is the LSH20 particularly suitable?It is ideal for devices that require the highest possible performance from a primary cell. These include emergency beacons, professional dive computers, military communications technology, geophysical measuring instruments and other demanding industrial applications.Is the LSH20 rechargeable?No, the LSH20 is a lithium primary battery and must never be recharged under any circumstances. Any attempt to recharge is dangerous and can lead to destruction of the cell or to an explosion.

The Saft LSH20 LF-U is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, which is assembled with U-shaped solder connections for flexible and robust installation. It combines the spiral-shaped high-performance technology of the LSH series with versatile connection options. With a rated voltage of 3.6 V and a very high capacity of 13.0 Ah, it is the ideal choice for demanding devices that require extremely high energy output and flexible installation.Highlights at a glanceFlexible mounting: U-shaped solder terminals (LF-U) for versatile installation positionsMaximum power: Developed for the highest continuous currents up to 1800 mAExtremely high capacity: 13.0 Ah in the D size for maximum runtime under loadHighest pulse capacity: Reliable output of pulses up to 4000 mA (4 A)Spiral technology: Optimised for fast energy output with minimal voltage dropRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for critical applicationsThe Saft LSH20 LF-U was designed for use in professional devices that require maximum power and a wired connection. The U-shaped solder connections enable a secure connection using cables. Typical applications include emergency transmitters (ELT, EPIRB), military equipment, professional power tools and industrial applications where the power source cannot be placed directly on the circuit board.Superior spiral technology for maximum currentsIn contrast to batteries with a wound design (bobbin type), the spiral design of the LSH20 maximises the active electrode surface. This enables a significantly faster chemical reaction and therefore the delivery of extremely high currents with stable voltage behaviour. This ensures reliable and constant performance of your application even under the highest load.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LSH20 LF-U conforms to the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with the highest power requirements.Characteristics ModelSaft LSH20 LF-U TechnologyLithium thionyl chloride (high current) SizeD (mono) Nominal voltage (V)3.6 Capacity (mAh)13000 Max. continuous discharge current1800 mA Max. pulse current4000 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 100 ConnectionSolder tag (U-shape) RechargeableNo  FAQs on the Saft LSH20 LF-U lithium round cellWhat does the designation LF-U mean?The LF-U labelling describes the type of connections on the battery. "LF" stands for solder connection and the "U" specifies their shape as U-shaped solder lugs. These allow cables to be soldered on or used in certain holders, which offers a high degree of flexibility during installation.What is the main difference to the Saft LS33600?Although both batteries are size D, they are optimised for opposing purposes. The LSH20 LF-U is designed for maximum power and extremely high current output. The LS33600 is optimised for an extremely long service life with very low power consumption and offers a higher capacity.For which applications is this version with solder terminals suitable?This version is ideal for high-performance applications where the battery does not sit directly on a circuit board. It is often used to replace older batteries with soldered cables or in devices that require a flexible, wired connection to the power source.Does the LSH20 have a higher self-discharge rate than an LS battery?Yes, due to the spiral design with a larger electrode surface, the self-discharge of the LSH series tends to be slightly higher than that of the LS series. Nevertheless, it offers excellent shelf life and durability for a high-performance battery.Is the LSH20 LF-U rechargeable?No, the LSH20 LF-U is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous and can lead to the destruction of the cell or to a deflagration.

The Saft LSH20 with Z solder tag is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, designed for horizontal mounting on printed circuit boards. It combines the spiral-shaped high-performance technology of the LSH series with a flat, space-saving installation. With a nominal voltage of 3.6 V and a very high capacity of 13.0 Ah, it is the ideal choice for demanding devices that require an extremely high energy output and a compact design.Highlights at a glanceFlat mounting: Z-shaped solder terminals for horizontal PCB mountingMaximum power: Developed for highest continuous currents up to 1800 mAExtremely high capacity: 13.0 Ah in the D size for maximum runtime under loadHighest pulse capacity: Reliable delivery of pulses up to 4000 mA (4 A)Spiral technology: Optimised for fast energy output with minimal voltage dropRobust: Hermetically sealed stainless steel housing for maximum operational safetyMaximum power for compact applicationsThe Saft LSH20 with Z solder tag was specially developed for use in professional devices where a low height and extremely high performance are crucial. The Z-shaped connections allow the battery to be soldered horizontally directly onto the circuit board. It is ideal for emergency transmitters, military equipment and high-performance industrial applications with limited installation space.Superior spiral technology for maximum currentsIn contrast to batteries with a wound design (bobbin type), the spiral design of the LSH20 maximises the active electrode surface. This enables a significantly faster chemical reaction and therefore the delivery of extremely high currents with stable voltage behaviour. This ensures reliable and constant performance of your application even under the highest load.Efficiency and guaranteed safetyThe cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LSH20 conforms to the IEC 60086-4 safety standard and is UL certified, making it suitable for safety-critical applications with the highest power requirements. Battery features  ModelSaft LSH20 (Z solder tag) TechnologyLithium thionyl chloride (high current) SizeD (mono) Rated voltage (V)3.6 Capacity (mAh)13000 Max. continuous discharge current1800 mA Max. pulse current4000 mA Self-dischargeapprox. 3% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 100 ConnectionZ solder tag RechargeableNo  FAQs about the Saft LSH20 with Z solder tagWhat is the advantage of a Z solder tag?The Z-shaped solder tag is specially designed for horizontal (flat) mounting of the battery on a printed circuit board. This enables a very low installation height and is ideal for compact electronic devices where vertical installation space is limited.What is the main difference to the Saft LS33600?Although both batteries are size D, they are optimised for opposing purposes. The LSH20 is designed for maximum power and extremely high current output. The LS33600 is optimised for an extremely long service life with very low power consumption and offers a higher capacity.For which applications is this battery particularly suitable?This version is optimal for all high-performance applications where a long-life battery is required and a very flat design is needed at the same time. Examples are compact emergency transmitters, flat sensor modules, or high-performance memory modules.Does the LSH20 have a higher self-discharge rate than an LS battery?Yes, due to the spiral-shaped design with a larger electrode surface, the self-discharge of the LSH series tends to be slightly higher than that of the LS series. Nevertheless, it offers excellent shelf life and durability for a high-performance battery.Is the LSH20 with Z solder tag rechargeable?No, this is a lithium primary battery, which is not rechargeable. Any attempt to recharge the battery is dangerous and may result in destruction of the cell or deflagration.

Saft Lithium battery LSH 20 3.6V 13Ah with axial terminals

The Saft LS26500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size C, developed for demanding industrial applications with very high energy requirements. It offers a nominal voltage of 3.6 V and an exceptionally high capacity of 7.7 Ah. Thanks to its extremely low self-discharge and robust construction, it is the ideal choice for long-life applications where maximum reliability and a long, maintenance-free operating life are required.Highlights at a glanceVery high capacity: 7.7 Ah in the C size for maximum runtimePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of under 1% per yearReliable: Excellent response behaviour even after long storageRobust: Hermetically sealed stainless steel case for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for energy-intensive applicationsThe Saft LS26500 is the perfect energy solution for professional and industrial devices that require a high amount of energy over a long period. Its high capacity makes it the first choice for meters for gas, water or electricity (metering), memory backup systems (memory back up), buoys, tracking systems as well as industrial controls. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage, and features a non-flammable electrolyte which significantly increases operational safety. The LS26500 complies with safety standard IEC 60086-4 as well as being UL certified and thus demonstrates its suitability for safety-critical applications.Robust Li-SOCl2 technology for industryLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage right up to the end of the discharge cycle, even after long periods of storage. The robust construction protects the cell reliably against corrosion and environmental influences, ensuring the functionality of your application over the entire product lifetime. Characteristics  ModelSaft LS26500 TechnologyLithium Thionyl Chloride (Li-SOCl₂) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)7700 Max. continuous discharge current150 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 26.0 x 50.0 Weight (g)approx. 48 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Saft LS26500 lithium round cellWhat does the size C mean?The C size describes a cell that has the same height as a standard AA battery but has a larger diameter (approx. 26 mm compared to 14.5 mm). This larger diameter allows a significantly higher capacity.Is the Saft LS26500 rechargeable?No, the LS26500 is a lithium primary battery and must never be recharged under any circumstances. Any attempt to charge is dangerous and can lead to cell destruction, leakage, or bursting.For which applications is the LS26500 particularly suitable?It is optimal for professional applications with high energy requirements and low continuous current that must operate autonomously for many years. These include in particular meters (smart metering), long-term data loggers, maritime buoys and demanding security technology.What is the difference to the Saft LS17500?Both cells have the same height, but the LS26500 (size C) is thicker than the LS17500 (size A). Due to the larger volume, the LS26500, with 7.7 Ah, offers a much higher capacity than the LS17500, with 3.6 Ah, and enables longer runtimes.How must the LS26500 be correctly disposed of?As a lithium battery, it is subject to special disposal regulations. It must be handed in to the relevant municipal collection points or specialist dealers. Disposal with household waste is not permitted.

The Saft LS33600 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in size D, which was developed for demanding industrial applications with maximum energy requirements. It offers a nominal voltage of 3.6 V and an exceptionally high capacity of 17.0 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications where maximum reliability and decades of maintenance-free operation are required.Highlights at a glanceMaximum capacity: 17.0 Ah in the D size for an extremely long runtimePowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long periods of storageRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Can be used in a wide temperature range from -60 °C to +85 °CPowerful for energy-intensive long-term applicationsThe Saft LS33600 is the perfect energy solution for professional and industrial devices that require a very high amount of energy autonomously over many years. Its outstanding capacity makes it the first choice for gas, water or electricity meters (metering), memory backup systems (memory back up) for critical infrastructure, maritime buoys, seismic sensors and sophisticated tracking systems.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage and has a non-flammable electrolyte, which significantly increases operational safety. The LS33600 is compliant with the IEC 60086-4 safety standard and UL certified, emphasising its suitability for safety-critical applications.Robust Li-SOCl2 technology for industryLithium thionyl chloride chemistry stands for superior energy density and an exceptionally long service life. Compared to other battery technologies, it offers a stable voltage level until the end of the discharge cycle, even after a long storage period. The robust design reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application over the entire product service life. Characteristics  ModelSaft LS33600 TechnologyLithium thionyl chloride (Li-SOCl₂) SizeD (mono) Rated voltage (V)3.6 Capacity (mAh)17000 Max. continuous discharge current200 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 33.4 x 60.0 Weight (g)approx. 90 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Saft LS33600 lithium round cellWhat does size D mean?Size D, also known as a mono cell, is one of the largest standard sizes for round cells. Its large volume enables a very high capacity, making it ideal for applications that require an extremely long runtime without battery replacement.Is the Saft LS33600 rechargeable?No, the LS33600 is a lithium primary battery and must not be charged under any circumstances. Attempted charging is dangerous and can lead to destruction of the cell, leakage or deflagration.For which applications is the LS33600 particularly suitable?It is ideal for professional applications with very high energy requirements and low continuous current that need to function independently for decades. These primarily include smart metering gateways, long-term data loggers, buoys, pipeline monitoring systems and other low-maintenance industrial applications.What is the difference to the Saft LS26500?The main difference lies in the size and capacity. The LS33600 (size D) is both taller and thicker than the LS26500 (size C). As a result, at 17.0 Ah, the LS33600 offers more than twice the capacity of the LS26500 (7.7 Ah) and therefore enables considerably longer operating times.How should the LS33600 be disposed of correctly?As a lithium battery, it is subject to special disposal regulations. It must be disposed of at appropriate municipal collection centres or specialist retailers. Disposal with household waste is not permitted.

The Saft LS14250 is a high-performance and long-lasting lithium thionyl chloride battery (Li-SOCl2) developed for demanding electronic devices. It offers a nominal voltage of 3.6 V and a capacity of 1.2 Ah. Thanks to its robust construction and low self-discharge, it is the ideal choice for long-term applications where reliability comes first. The cell is characterised by an exceptionally long service life and a wide operating temperature range.Highlights at a glancePowerful: 1.2 Ah capacity at 3.6 V – 4.32 Wh total energyLong-lasting: Extremely low self-discharge of under 1% per yearReliable: High and stable operating voltage throughout service lifeRobust: Stainless steel housing with hermetic glass-metal sealVersatile: Wide operating temperature range from -60°C to +85°CPowerful in a variety of applicationsThe LS14250 stands out due to its high energy density and its compact design in the 1/2 AA format. This makes it extremely versatile and ideally suited for burglar alarm and security systems, toll systems, memory back-up, computer real time clocks, tracking systems, as well as professional electronics. Thanks to its broad temperature range, the battery guarantees reliable performance even under extreme conditions.Efficiency and safety with systemThe proven lithium thionyl chloride technology ensures constant and reliable power output. The non-flammable electrolyte and the hermetic sealing guarantee the highest standards of safety during operation. The cell is compliant with IEC 60086-4 safety standard and is UL certified. The storage life of up to 10 years makes the Saft LS14250 an economical and sustainable energy solution.Robust Li-SOCl2 technologyThe lithium thionyl chloride technology used stands for high energy density, stability and a long service life. Compared to other primary cells, this technology offers superior performance, especially in applications with low continuous current. The low self-discharge and high corrosion resistance ensure your devices function for many years. Characteristics  ModelSaft LS14250 TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current35 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 25.0 Weight (g)approx. 8.9 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Saft LS14250 lithium round cellHow long can the Saft LS14250 be stored?The battery has a very low self-discharge of less than 1% per year when stored at +20°C. This enables storage for up to 10 years without significant loss of capacity.Is the Saft LS14250 rechargeable?No, the Saft LS14250 is a primary battery. It is not designed for recharging. Any attempt to recharge the battery is a safety risk and may cause damage or leakage of the cell.What applications is the LS14250 battery suitable for?The LS14250 is ideal for applications which require low but constant power supply over a long period. These include, among others, memory back-ups for control units, real time clocks in computers, burglar alarms, tracking systems, and various measuring devices.Can this battery be used as a replacement for other models such as ER14250?Yes, the Saft LS14250 is, in many cases, a suitable replacement for batteries designated ER14250, as it has the same size and comparable electrical properties. However, it is recommended to check the device manufacturer's specific requirements.Within which temperature range can the battery be used?The Saft LS14250 offers an exceptionally wide operating temperature range of –60°C to +85°C and thus assures reliable operation even under extreme environmental conditions.