Saft Lithium round cell LS14500 3PF with 3.6 V and 2.6 Ah

The Saft LS14500 2PF is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, which is equipped at the factory with two axial solder pins. This assembly enables safe and permanent mounting directly on printed circuit boards. It offers a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, making it the ideal choice for long-lasting industrial applications that require a permanently mounted power source.Highlights at a glanceReady to install: Two axial solder pins (2PF) for direct and secure PCB mountingHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely Long-lasting: Very low self-discharge of less than 1% per yearRobust: Hermetically sealed stainless steel housing for maximum safety in operationVersatile: Usable in a wide temperature range from -60°C to +85°CPowerful for industrial electronicsThe Saft LS14500 2PF was specially developed for use in professional electronics, where a vibration-resistant and permanent power supply is crucial. Thanks to the integrated solder pins, it is ideal for permanent installation in memory backup systems, alarm systems, industrial control units (PLCs), counters, and safety-critical sensors that must function reliably for many years.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output throughout the entire service life. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage. It also contains a non-flammable electrolyte, which significantly increases operational safety. The LS14500 2PF complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsThe lithium thionyl chloride chemistry delivers superior energy density and an exceptionally long service life. Compared to other battery technologies, it provides a stable voltage level up to the end of the discharge cycle. The robust construction reliably protects the cell from corrosion and mechanical stress, ensuring the functionality of your application throughout the product's service life. Features  ModelSaft LS14500 2PF TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection2 radial pins (2PF) RechargeableNo  FAQs about the Saft LS14500 2PF lithium round cellWhat does the designation 2PF mean?The marking 2PF describes the assembly of the battery. It means that the cell is provided with two axial solder pins (pins). These enable easy and safe through-hole mounting (Through Hole Technology) directly onto a printed circuit board.Is the Saft LS14500 2PF rechargeable?No, the LS14500 2PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to recharge is dangerous, damages the cell, and can result in leakage or venting.What is the difference to the standard LS14500 without pins?The electrical characteristics and the battery cell itself are identical. The only difference lies in the configuration. The 2PF version is intended for direct soldering onto a PCB, whereas the standard version is designed for use in battery holders.Can this battery be used in normal devices for AA batteries?No, this battery is intended solely for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than double that of a conventional 1.5 V AA battery. Furthermore, the solder pins prevent use in standard battery holders.How is the battery mounted correctly on a PCB?The battery is inserted through the designated holes on the PCB and then soldered. It is essential to ensure the correct polarity, which is marked on the battery, to avoid damaging the electronics.

The Tadiran SL-360PT from the iXtra series is a primary lithium thionyl chloride battery in the widely used size AA (Mignon). It was specially developed for applications requiring a long service life in combination with a moderate current load capacity. This version comes pre-assembled with axial pins for flexible and secure solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceReady to install: With robust, axial pins for direct solder mounting.Optimised for moderate loads: High capacity and stable voltage even with medium current demand.Very high capacity: 2.4 Ah for maximised and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PT was specifically developed for applications in which longevity and improved power delivery are crucial. The axial pins enable fixed and vibration-proof integration without a battery holder. Main areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial counters and measuring instruments (metering) that transmit data regularly.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PT are based on Tadiran's proven design. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces total operating costs for your application.iXtra series: The technology for higher performanceTadiran's iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better performance with moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply in applications which regularly "wake up" to perform tasks. Features  ModelTadiran SL-360/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative ends of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and long-lasting solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is permanently soldered and a long service life with regular power demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-360PR from the iXtra series is a primary lithium thionyl chloride battery in the widely used AA (Mignon) format. It was specially developed for applications requiring a long service life combined with moderate current capacity. This version is pre-fitted with radial pins for specific and safe mounting on PCBs. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it offers the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceFor PCB mounting: Pre-fitted with radial pins for direct installation.Optimised for moderate loads: High capacity and stable voltage even with moderate current demand.Very high capacity: 2.4 Ah for maximally extended and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V throughout nearly its entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PR was purpose-designed for applications where a long service life and improved power performance are crucial. The radial pins enable specific and space-saving placement on the PCB. Its main fields of application include wireless alarm and security systems, GPS tracking modules, professional two-way radios, data loggers as well as industrial meters and measuring devices (metering) that regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PR are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal, which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of inherent safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra series: The technology for higher performanceThe Tadiran iXtra series is designed to provide enhanced voltage stability under load. Compared to the standard series (SL-700), which is optimised for ultra-low continuous current, the SL-300 series performs better for medium load requirements and pulse currents. As a result, the passivation effect is impressed more quickly, delivering a more stable power supply in applications that "wake up" regularly to perform tasks. Features ModelTadiran SL-360/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does connection with "radial pins" mean?In contrast to axial connections, which exit centrally from the poles, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific PCB layouts and ensures particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers a more stable voltage under load. In contrast, the SL-700 series is designed for absolute long-term use with minimal continuous current, such as in pure memory-backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered in and a long service life with regular current demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can cause overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage loss under load than in the SL-700 series, which is advantageous for applications with regular current pulses.