Tadiran Lithium battery SL-761S / 2/3 AA

The Tadiran SL-360P from the iXtra series is a primary lithium-thionyl chloride battery in the AA (Mignon) size. This special version is pre-configured with robust axial connection wires, enabling flexible and secure installation by direct soldering. It was designed for applications combining long lifetime with moderate current-carrying capability. With 3.6 V nominal voltage and a very high capacity of 2.4 Ah, it is the ideal power solution for professional electronics that regularly require moderate current pulses.Highlights at a glanceReady to install: With robust, axial wires for direct and safe soldering installation.Optimised for moderate loads: High capacity and stable voltage even at medium current demand.Very high capacity: 2.4 Ah for maximum extended and autonomous operating duration.High nominal voltage: Stable voltage level of 3.6 V over almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-360P was specifically developed for applications where longevity and improved power delivery are crucial. The axial wires enable secure and vibration-proof integration without a battery holder. Its main areas of application include wireless alarm and security systems, GPS tracking modules, professional radio devices, data loggers as well as industrial counters and measuring instruments (metering), which regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360P are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, thus minimising maintenance costs and reducing the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimum continuous currents, the SL-300 series shows improved performance with medium load requirements and pulse currents. The passivation effect is thereby more quickly overcome, leading to a more stable power supply in applications which regularly "wake up" to perform tasks.Features  ModelTadiran SL-360/P TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial wires (P) RechargeableNo  FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires that exit centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration allows for very flexible installation and direct, firm connection to the electronics by soldering, without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require a long service life, but regularly need power for functions such as data transmission. The axial wires make it perfect for installations where the cell must be firmly soldered.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is dangerous and may result in overheating, leakage, or the cell bursting.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer is broken down more quickly and with less voltage drop under load than with the SL-700 series, which is advantageous for applications with regular current pulses.

The XCELL XCELFP129 is a compact and powerful 12.8 V lithium iron phosphate battery (LiFePO₄) with a capacity of 9 Ah, ensuring reliable power supply. Its integrated battery management system (BMS) guarantees safety, longevity, and high charging efficiency. With over 2000 charge cycles at 80% depth of discharge (DOD), it is a sustainable solution for demanding mobile and stationary applications.Highlights at a glanceCompact energy: 9 Ah capacity at 12.8 V – 115.2 Wh total energyDurable: More than 2000 charge cycles at 80% DODBMS integrated: Protection against overcharging, deep discharge, short circuit and overtemperatureFlexible in use: Parallel connection of up to 2 batteries, serial connection of up to 4 batteries possibleFast charging capability: Efficient charging with up to 9 APowerful in a wide range of applicationsWith its compact dimensions (151 × 65 × 93.5 mm) and a weight of only approx. 1.1 kg, the XCELFP129 is very versatile. It is an excellent alternative to VRLA batteries and is ideally suited for a wide range of applications. These include emergency power systems, portable energy storage, rehabilitation and medical technology, solar storage solutions, alarm systems as well as caravan and marine systems. Even at extreme temperatures from -20°C to +55°C, it delivers stable performance.Efficiency and safety with a systemThe integrated hardware BMS monitors all relevant parameters such as voltage, temperature and current flow, thus ensuring safe operation. It protects against typical risks such as overcharging, deep discharge or short circuit and increases the service life of the cells. Thanks to maintenance-free LiFePO₄ technology, the battery is also gas-free, insensitive to deep discharge and particularly safe.Robust LiFePO₄ technologyThe XCELFP129 is based on cylindrical LiFePO₄ cells of type 21700 (3 Ah), which ensure high thermal stability, long service life and consistent performance. Compared to lead-acid or conventional lithium batteries, LiFePO₄ cells excel in safety, efficiency, and significantly higher cycle stability.Features  ModelXCELL LFP129 Battery typeLiFePO₄ (lithium iron phosphate) Nominal voltage (V)12.8 Capacity (Ah)9 Maximum discharge current9A (continuous) Recommended charging voltage14.4V - 14.6V Trickle charge13.6V - 13.8V Operating temperature (°C)Charging: 0 ~ 45 / Discharging: -20 ~ 60 Storage temperature (°C)-10 ~ 35 Service life>2000 cycles at 100% depth of discharge Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 1.1 ConnectionFaston 250 (6.35 mm) Protection circuitIntegrated BMS  FAQs about the XCELL XCELFP129 LiFePO₄ batteryHow many charge cycles does the XCELL XCELFP129 offer?The battery achieves over 2000 charge cycles at 80% depth of discharge and thus offers a service life of more than 10 years.Can multiple batteries be connected together?Yes, up to 2 batteries can be connected in parallel and up to 4 batteries in series – ideal for flexible storage solutions.For which applications is the battery suitable?The XCELFP129 is suitable for solar storage solutions, emergency power systems, rehabilitation and medical technology, alarm systems, caravan and marine applications as well as a replacement for VRLA batteries.What technology does the XCell LFP129 use, and what protection functions are integrated?It is based on lithium iron phosphate technology (LiFePo₄) and contains an integrated hardware BMS (battery management system) that provides protection against overcharging, deep discharge, overtemperature and short circuit.Is the battery compatible with conventional chargers for lead-acid batteries?Yes, the protection circuit (BMS) allows charging with standard chargers for lead-acid batteries.Is the XCell LFP129 maintenance-free, safe and lighter than comparable lead-acid batteries?Yes, it is maintenance-free, offers a very high level of intrinsic safety (no risk of explosion even under extreme conditions), and weighs about a third less than comparable lead-acid batteries.

The VARTA CR2/3AA is a high-performance 3-volt lithium primary battery developed for professional and industrial applications with the highest requirements for longevity and reliability. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and a very wide operating temperature range. As a loose cell, it is the ideal energy source for the initial equipment (OEM) of durable and low-maintenance electronic devices.Highlights at a glanceExtreme longevity: Up to 10 years of storage thanks to extremely low self-discharge.High energy density: Maximum energy in a compact form for prolonged autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High capacity: 1.35 Ah for energy-intensive applications with long run time requirements.Industrial top quality: Developed and manufactured for demanding OEM applications and safety-relevant electronics.Reliable energy for long-term applicationsThe VARTA CR2/3AA is the preferred power source for "fit and forget" applications where battery replacement is not planned for years. Its main area of use is for supplying security sensors (e.g. in alarm systems), smart meters (smart metering for water, gas, electricity), industrial control systems (PLC) and the backup of memory modules (SRAM/CMOS backup). It is the optimal solution for all self-sufficient, wireless devices.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the outstanding performance of this cell. It enables a high nominal voltage of 3 volts and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum serviceability even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs a highly specialised single cell, the CR2/3AA is optimised for industrial further processing and assembly into battery solutions. Its robust construction and high quality ensure reliable integration into end devices. VARTA offers developers and manufacturers a reliable and powerful platform for the development of durable and low-maintenance products with this cell. Characteristics                                                                                                                                                        Model              VARTA Lithium Battery CR2/3AA               Battery type              Lithium manganese dioxide (Li-MnO2)               Rated voltage (V)              3.0               Capacity (mAh)              1350               Diameter (mm)              14.75               Height (mm)              33.5               Weight (g)              17.0        FAQs about the VARTA Lithium Battery CR2/3AAWhat is the main advantage of this lithium battery?The crucial advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. It supplies reliable energy for many years and is therefore ideal for maintenance-free devices in which the battery is permanently built in.Is this battery rechargeable?No. This is a lithium primary battery. It must never be attempted to recharge it under any circumstances. Charging attempts are extremely dangerous and can lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the CR2/3AA is usually assembled with attached solder pins or solder tabs to then be safely soldered onto a circuit board. It can also be used in special battery holders.What does the size designation "2/3 AA" mean?This means that the cell has the same diameter as a standard AA battery, but only about two thirds of its height. This compact form allows use in space-critical applications.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the respective designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.

""Sonnenschein Lead-acid battery A512/140 A incl. MTZ Nominal voltage: 12 V Nominal capacity 20h: 140 Ah Max. Max. load: 770 A Connection: A Maintenance-free over the entire service life Deep discharge-proof in accordance with DIN 43 534 Tried and tested worldwide and successful dryfit technology Extremely low gassing due to internal gas recombination Grid plate in lead-calcium alloys Service life 6 years Very low self-discharge rate and therefore long shelf life Short recharging times Fully recyclable 7 years Design life at an ambient temperature of 20 °C (80% residual capacity) Excellent energy storage properties combined with high reliability The lead batteries from Sonnenschein have a stable and reliable capacity, are deep discharge-proof, maintenance-free, fully recyclable and tried and tested worldwide. ""

The VARTA CRAA with U-solder tabs (LF-U) is a high-performance, industrially assembled 3-volt lithium primary battery in AA format. It was developed for professional applications that require an extremely durable and reliable energy source with a connection type optimized for direct PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers a high capacity of 2Ah, extremely low self-discharge and is the ideal energy source for the initial equipment (OEM) of long-life and low-maintenance electronic devices.Highlights at a glanceIndustrial assembly: Equipped with robust U-solder tabs for easy and secure PCB mounting.Extreme longevity: Up to 10 years storage life due to extremely low self-discharge.High capacity: With 2 Ah, it offers a very high energy reserve for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High 3V voltage: Ideal for modern electronic circuits in AA format.Reliable energy for long-term applicationsThe assembled VARTA CRAA is the preferred energy source for "fit and forget" applications where the battery is permanently soldered to a PCB. Its main areas of use are powering smart meters (smart metering for water, gas, electricity), industrial controllers (PLC), safety sensors, alarm systems, and the buffering of memory modules (SRAM/CMOS backup) in professional electronics.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts in the popular AA format and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum readiness for use even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CRAA with U-solder tabs is optimized for efficient and process-safe machine or manual placement of PCBs. The robust, U-shaped solder tabs ensure a permanently secure and vibration-resistant solder connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of durable and low-maintenance products. Characteristics                                                                                                                                                                              Model              VARTA lithium round cell CRAA with U-solder tabs               Battery type              Lithium manganese dioxide (Li-MnO2)               Rated voltage (V)              3.0               Capacity (mAh)              2000               Diameter (mm)              14.75               Height (mm)              50.5               Weight (g)              21.5               Connection              U-solder tabs        FAQs on the VARTA lithium battery CRAA with U-solder tabsWhat does "LF-U" or "U-solder tabs" mean?"LF" stands for "solder tab". The addition "U" describes the shape of the metal strips welded to the poles, which are bent like a "U". This configuration facilitates soldering the battery to a PCB (printed circuit board) and ensures a particularly stable mechanical connection.Is this battery rechargeable?No. This is a lithium primary battery. It must by no means be recharged. Attempting to recharge is extremely dangerous and may lead to fire or explosion.Can I use this battery as a replacement for a standard 1.5V AA battery?No, absolutely not. This CRAA cell has a rated voltage of 3 volts, whereas standard AA batteries (alkaline, lithium, NiMH) have 1.5 volts. It may only be used in devices explicitly designed for the 3-volt lithium CRAA type, as the higher voltage would destroy other devices.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the regulations of the Battery Act. Please take the empty battery to the appropriate industrial or municipal collection points to ensure correct and environmentally friendly recycling.

The Tadiran SL-2790S is a revolutionary PulsesPlus hybrid battery in the large case size DD. It was developed for the most demanding long-term applications that require both extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With an enormous capacity of 32 Ah, it is the first choice for devices that have to operate completely autonomously for many years.Highlights at a glanceExtremely high capacity: 32 Ah for maximum autonomous operating times over many years.High pulse current capability: Ideal for applications with high peak current requirements (up to 4 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust DD form factor: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2790S is the optimal energy solution for applications that must work for years to decades without maintenance and still need periodic high power for transmission processes. Its main application areas include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements as well as demanding military applications.The PulsesPlus technology: Maximum energy and performanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as long-term energy storage and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is delivered directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and so ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unmatched benefits. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use over decades and can provide high power immediately when required, even after long periods of inactivity and at low temperatures. Features  ModelTadiran SL-2790/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) Case sizeDD Rated voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is the PulsesPlus technology?PulsesPlus is a hybrid system that combines a durable lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for a very long service life, while the capacitor provides the high output for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high current bursts. A typical example is a self-sufficient measuring buoy that transmits its data to a satellite once a day. A standard battery would experience a voltage drop with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application’s point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never encounters the high load. As a result, the voltage drop caused by the passivation layer in standard cells is effectively avoided.Does this model have solder or wire connections?No, the model SL-2790S is the standard version with regular battery contacts and is intended for use in a suitable DD battery holder. For direct installation, Tadiran also offers versions of this cell type with different connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.