Tadiran SL-360P Lithium Battery AA with 3.6 V and 2.4 Ah, with axial terminals

The Tadiran SL-360S from the iXtra Series is a primary lithium thionyl chloride battery in the size AA (Mignon). It has been specially developed for applications that require a long service life in combination with moderate current capacity. With a high nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics that regularly require moderate current pulses. This model is the standard version for use in battery holders.Highlights at a glanceOptimised for moderate loads: High capacity and stable voltage even with moderate current requirements.Very high capacity: 2.4 Ah for a maximum extended and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V for almost the entire lifetime.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360S was specifically developed for applications where longevity and improved performance output are crucial. Its primary uses include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers, as well as industrial counters and measuring instruments (metering) that regularly transmit data. It is the ideal choice for all devices that operate independently for years and periodically require power for transmission or measurement operations.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360S is based on proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to supply its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra Series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series offers better performance with moderate load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply for applications that regularly "wake up" to perform tasks. Characteristics  ModelTadiran SL-360/S TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryWhat is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate current requirements (e.g. wireless sensors). It provides more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory back-up applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require long service life but regularly need power for functions such as sending data. Examples include wireless alarm systems, GPS trackers, data loggers and industrial wireless sensors.Does this model have solder terminals or wires?No, the model SL-360S is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers versions of this cell type with various solder terminals.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface which minimises self-discharge. The iXtra Series is designed so that this layer breaks down more quickly and with less voltage drop under load than with the SL-700 Series, which is advantageous for applications with regular current pulses.

The Tadiran SL-2790S is a revolutionary PulsesPlus hybrid battery in the large case size DD. It was developed for the most demanding long-term applications that require both extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With an enormous capacity of 32 Ah, it is the first choice for devices that have to operate completely autonomously for many years.Highlights at a glanceExtremely high capacity: 32 Ah for maximum autonomous operating times over many years.High pulse current capability: Ideal for applications with high peak current requirements (up to 4 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust DD form factor: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2790S is the optimal energy solution for applications that must work for years to decades without maintenance and still need periodic high power for transmission processes. Its main application areas include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements as well as demanding military applications.The PulsesPlus technology: Maximum energy and performanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as long-term energy storage and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is delivered directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and so ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unmatched benefits. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use over decades and can provide high power immediately when required, even after long periods of inactivity and at low temperatures. Features  ModelTadiran SL-2790/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) Case sizeDD Rated voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is the PulsesPlus technology?PulsesPlus is a hybrid system that combines a durable lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for a very long service life, while the capacitor provides the high output for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high current bursts. A typical example is a self-sufficient measuring buoy that transmits its data to a satellite once a day. A standard battery would experience a voltage drop with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application’s point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never encounters the high load. As a result, the voltage drop caused by the passivation layer in standard cells is effectively avoided.Does this model have solder or wire connections?No, the model SL-2790S is the standard version with regular battery contacts and is intended for use in a suitable DD battery holder. For direct installation, Tadiran also offers versions of this cell type with different connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.

The Tadiran SL-761S is a primary high-performance lithium thionyl chloride battery in the compact special size 2/3 AA. It was designed for maximum reliability and an extremely long operating life in space-critical applications. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal power solution for professional electronic assemblies where miniaturisation and longevity are important. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceCompact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for long and self-sufficient operating periods.High nominal voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding longevity: Designed for more than 10 years of operating and storage life.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, the Tadiran SL-761S is ideal for space-critical applications where a standard AA cell would be too large. It is the preferred choice for professional original equipment in compact sensors, for memory backup (RTC, CMOS) on densely populated boards, in smaller alarm systems and in medical technology. Its reliability also makes it indispensable for miniaturised GPS tracking modules and other mobile monitoring devices.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761S are based on its well thought-out construction. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy is almost completely available even after years of storage, which distinguishes the SL-761S from all other battery technologies. Characteristics  ModelTadiran SL-761/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Tadiran SL-761S batteryIs this battery rechargeable?No, the Tadiran SL-761S is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface that minimises self-discharge. With the first load, this layer can lead to a short voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.How long does the battery last and how should it be stored?The battery has a shelf life of more than 10 years. For maximum durability, we recommend storing it in a cool and dry place with low humidity.Which devices is this battery type suitable for?This battery type is intended exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology and miniaturised tracking systems.Does this model have solder connections?No, this SL-761S model is the standard version and is supplied without solder connections. It is intended for use in suitable battery holders. For direct installation on PCBs, Tadiran offers variants of this cell type with different solder connections.What makes this battery safer than other battery types?Safety is ensured by several factors: The hermetic glass-to-metal seal prevents leakage, the inorganic electrolyte is non-flammable and the cell is not under pressure at room temperature. This ensures a high level of operational safety.

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency lights of the Mexcel M72 series. The battery pack consists of four robust NiMH cells in AAA size, which are assembled into a compact cube of 4. With a nominal voltage of 4.8 V and a capacity of 800 mAh, this battery ensures the standard-compliant emergency lighting duration of your safety lighting and offers maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency light series M72 and compatible models.Reliable NiMH technology: Offers high capacity and cycle stability for demanding emergency lighting operation.Compact cube design: The 2x2 arrangement of the AAA cells enables a space-saving installation in the luminaire.Pre-assembled ready for connection: Equipped with a suitable connection cable and JST plug for quick and error-free replacement.High quality: Use of high-quality industrial cells for a long service life and maximum operational safety.Reliable power for your safety lightingA working battery is the heart of every single-battery emergency light. This Beltrona replacement battery ensures that your safety and escape sign luminaires reliably provide the prescribed energy for the emergency lighting period (e.g. 3 hours) in the event of a power failure. It is the ideal choice for periodic replacement in office buildings, retail outlets, schools and other public institutions to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency lights. Compared to the outdated NiCd technology, it is more environmentally friendly as it does not contain heavy metals such as cadmium, and generally has a higher energy density. The cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for professional installers. The assembly as a compact cube, the precisely fitting cable and the standardised JST plug enable a quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency light is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 ApplicationEmergency light battery TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)800 Cell arrangementBar (4 cells in series) Dimensions (L x W x H in mm)approx. 100 x 29 x 15 ConnectionCable with Molex plug Weight (g)approx. 110  FAQs about the replacement battery for emergency lightsHow do I recognise when the battery in an emergency light needs replacing?Modern emergency lights with autotest function usually indicate a defective or depleted battery by a status LED (e.g. via red flashing). At the latest, if the light no longer passes the annual endurance test for the full emergency lighting period, the battery must be replaced immediately. The typical lifespan of a NiMH battery in this application is approximately 4 years.Why is it important to use the exactly matching plug?The JST plug is a widely used standard in electronics. Using the appropriate pre-assembled plug ensures a polarity-safe and electrically flawless connection to the luminaire electronics. DIY solutions using screw terminals or adhesive tape are not permitted in safety-relevant systems.Can I replace this battery with one with a higher capacity (mAh)?As a rule, this is possible as long as the voltage (4.8V), technology (NiMH) and design are identical. A higher capacity will result in a longer emergency lighting period. However, you must ensure that the battery physically fits into the luminaire housing.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge at collection points in retail or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly recycling.

The Tadiran SL-860S is a primary high-performance lithium thionyl chloride battery in the widely used AA (Mignon) form factor. It was designed for professional applications requiring very high capacity and long service life. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is a reliable energy solution for long-life electronic devices. This model is the standard design for use in battery holders.Highlights at a glanceVery high capacity: 2.4 Ah for maximised extended and autonomous operating time.Standardised design: Common AA (Mignon) size for broad compatibility.High nominal voltage: Stable voltage of 3.6 V throughout almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-860S is the perfect choice for replacing conventional batteries in devices where frequent battery replacement is undesirable or costly. It is excellent for professional initial equipment in metering technology (water, gas, electricity), for memory backups (RTC, CMOS) in computers and controls, as well as in alarm systems, security systems and industrial sensors that rely on AA battery holders.Engineered for maximum safety and efficiencyThe safety and durability of the SL-860S are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces the overall operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low current drain. A characteristic feature is the passivation effect: A thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long shelf and operating life. This ensures that the energy is still reliably available even after many years. Characteristics  ModelTadiran SL-860/S TechnologyLithium thionyl chloride (high current) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 20 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryDoes this model have solder tabs or wires?No, the SL-860S model is the standard version with regular battery contacts and intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers variants of this cell type with different solder tabs.For which applications is this battery type suitable?This type of battery is ideal for professional electronics that require extremely long service life and use AA batteries. Typical applications are meters, industrial computers, alarm systems and long-life sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. When the battery is first put under load, especially at higher currents, it can lead to a brief voltage delay. This should be taken into account in the application’s circuit design.How long is the battery shelf life and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storage in a cool and dry place with low humidity.

The XCELL XCELFP129 is a compact and powerful 12.8 V lithium iron phosphate battery (LiFePO₄) with a capacity of 9 Ah, ensuring reliable power supply. Its integrated battery management system (BMS) guarantees safety, longevity, and high charging efficiency. With over 2000 charge cycles at 80% depth of discharge (DOD), it is a sustainable solution for demanding mobile and stationary applications.Highlights at a glanceCompact energy: 9 Ah capacity at 12.8 V – 115.2 Wh total energyDurable: More than 2000 charge cycles at 80% DODBMS integrated: Protection against overcharging, deep discharge, short circuit and overtemperatureFlexible in use: Parallel connection of up to 2 batteries, serial connection of up to 4 batteries possibleFast charging capability: Efficient charging with up to 9 APowerful in a wide range of applicationsWith its compact dimensions (151 × 65 × 93.5 mm) and a weight of only approx. 1.1 kg, the XCELFP129 is very versatile. It is an excellent alternative to VRLA batteries and is ideally suited for a wide range of applications. These include emergency power systems, portable energy storage, rehabilitation and medical technology, solar storage solutions, alarm systems as well as caravan and marine systems. Even at extreme temperatures from -20°C to +55°C, it delivers stable performance.Efficiency and safety with a systemThe integrated hardware BMS monitors all relevant parameters such as voltage, temperature and current flow, thus ensuring safe operation. It protects against typical risks such as overcharging, deep discharge or short circuit and increases the service life of the cells. Thanks to maintenance-free LiFePO₄ technology, the battery is also gas-free, insensitive to deep discharge and particularly safe.Robust LiFePO₄ technologyThe XCELFP129 is based on cylindrical LiFePO₄ cells of type 21700 (3 Ah), which ensure high thermal stability, long service life and consistent performance. Compared to lead-acid or conventional lithium batteries, LiFePO₄ cells excel in safety, efficiency, and significantly higher cycle stability.Features  ModelXCELL LFP129 Battery typeLiFePO₄ (lithium iron phosphate) Nominal voltage (V)12.8 Capacity (Ah)9 Maximum discharge current9A (continuous) Recommended charging voltage14.4V - 14.6V Trickle charge13.6V - 13.8V Operating temperature (°C)Charging: 0 ~ 45 / Discharging: -20 ~ 60 Storage temperature (°C)-10 ~ 35 Service life>2000 cycles at 100% depth of discharge Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 1.1 ConnectionFaston 250 (6.35 mm) Protection circuitIntegrated BMS  FAQs about the XCELL XCELFP129 LiFePO₄ batteryHow many charge cycles does the XCELL XCELFP129 offer?The battery achieves over 2000 charge cycles at 80% depth of discharge and thus offers a service life of more than 10 years.Can multiple batteries be connected together?Yes, up to 2 batteries can be connected in parallel and up to 4 batteries in series – ideal for flexible storage solutions.For which applications is the battery suitable?The XCELFP129 is suitable for solar storage solutions, emergency power systems, rehabilitation and medical technology, alarm systems, caravan and marine applications as well as a replacement for VRLA batteries.What technology does the XCell LFP129 use, and what protection functions are integrated?It is based on lithium iron phosphate technology (LiFePo₄) and contains an integrated hardware BMS (battery management system) that provides protection against overcharging, deep discharge, overtemperature and short circuit.Is the battery compatible with conventional chargers for lead-acid batteries?Yes, the protection circuit (BMS) allows charging with standard chargers for lead-acid batteries.Is the XCell LFP129 maintenance-free, safe and lighter than comparable lead-acid batteries?Yes, it is maintenance-free, offers a very high level of intrinsic safety (no risk of explosion even under extreme conditions), and weighs about a third less than comparable lead-acid batteries.