Tadiran

The Tadiran TL-5930 is a primary high-performance lithium-thionyl chloride battery in the large size D (Mono). It is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version (/F) comes with flexible cable ends (Flying Leads) pre-assembled for versatile and straightforward installation. With a nominal voltage of 3.6 V and a very high capacity of 19 Ah, it is the ideal energy solution for demanding and long-lasting industrial applications.Highlights at a glanceVery high capacity: 19 Ah for extremely long, self-sufficient operating times over many years.Maximum longevity: Extremely low self-discharge of under 1% per year.Flexible termination: Pre-assembled with free cable ends (/F) for versatile installations.High nominal voltage: Stable voltage of 3.6 V during almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful for many applicationsThe Tadiran TL-5930 was specifically developed for long-term applications with low to moderate continuous current, where maximum energy reserve is required. The flexible cable connections also allow installation away from the main board. Its main areas of use include self-sufficient measuring buoys, long-term data loggers, professional security technology, remote monitoring systems and industrial control units (SPS) that must operate for years without maintenance.Engineered for maximum safety and efficiencyThe safety and longevity of the TL-5930 are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium-thionyl chloride technologyLithium-thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low power consumption. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to a minimum and thus enables extremely long storage and operational life. This ensures that energy is still reliably available even after many years. Features  ModelTadiran TL-5930 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeD (Mono) Nominal voltage (V)3.6 Capacity (mAh)19000 Max. continuous discharge current230 mA Max. pulse current400 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 60.0 Weight (g)approx. 92 ConnectionCable connection RechargeableNo  FAQs about this Tadiran batteryWhat does the "/F" terminal (free cable ends) mean?This model is equipped with flexible connection cables whose ends are stripped. This allows a versatile connection, for example, to screw terminals, connectors or by direct soldering in applications where standard board mounting is not possible or desired.What does the high capacity of 19 Ah mean in practice?A capacity of 19 Ah means a very large energy reserve. A device that, for example, consumes an average current of 100 microamperes (µA), could theoretically be operated with this battery for over 20 years without the need to replace the battery.For which devices is this battery type suitable?This battery type is ideal for professional electronics that require an extremely long and maintenance-free runtime. Typical applications are long-term data loggers, remote control systems, emergency call systems and other self-sufficient systems with low to moderate current consumption.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is hazardous and may lead to overheating, leakage or bursting of the cell.What does the passivation effect mean in this battery?After extended storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. At the first load, especially with higher currents, it can cause a short voltage delay. This should be taken into account in the circuit design of the application.

The Tadiran SL-350T from the iXtra series is a primary lithium thionyl chloride battery in the extremely compact size 1/2 AA. It was specially developed for miniaturised applications that require a long service life in combination with moderate current load capability. This version comes equipped with solder tags (LF-U) for direct and secure mounting to PCBs. With a nominal voltage of 3.6 V and a capacity of 1.2 Ah, it is the ideal energy solution for professional, space-constrained electronics.Highlights at a glanceCompact and powerful: Optimised for moderate loads in the miniaturised 1/2 AA size.For PCB mounting: Pre-equipped with solder tags for direct installation.High capacity: 1.2 Ah for long operating times in small devices.High nominal voltage: Stable voltage level of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-350T was specifically developed for applications where both miniaturisation and enhanced power output are crucial. The solder tabs allow firm and permanent integration into the circuitry. Its primary use cases include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices, and other professional electronics that require regular transmission pulses in minimal space.Designed for maximum safety and efficiencySafety and longevity of the SL-350T are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable, ensuring a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over very long periods, reducing maintenance costs and lowering the total operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for the lowest continuous currents, the SL-300 series demonstrates better performance for medium load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in more stable energy delivery in applications that regularly "wake up" to perform tasks. Features  ModelTadiran SL-350/T TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current60 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionSolder tag (T) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with solder tags mean?This model is equipped with metal contacts, called solder tags, which can be soldered directly to a printed circuit board (PCB) for simple and permanently secure attachment. This provides excellent mechanical and electrical connections without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate power requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for maximum long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This type of battery is ideal for miniaturised electronics where the battery is directly soldered and long service life with regular power requirements is essential. Examples include compact wireless sensors, small medical devices, and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer is broken down faster and with less voltage drop under load than with the SL-700 series, which is an advantage for applications with regular current pulses.

The Tadiran SL-350PR from the iXtra series is a primary lithium thionyl chloride battery in the extremely compact 1/2 AA size. It was specially developed for miniaturised applications that require long life in combination with moderate current capability. This version is pre-assembled with radial pins for a specific and secure mounting on PCBs. With 3.6 V nominal voltage and 1.2 Ah capacity, it is the ideal energy solution for professional, space-critical electronics.Highlights at a glanceFor PCB mounting: Pre-assembled with radial pins for direct installation.Compact and powerful: Optimised for moderate loads in the miniaturised 1/2 AA size.High capacity: 1.2 Ah for long runtimes in small devices.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-350PR was specifically developed for applications where both miniaturisation and improved performance are essential. The radial pins enable a specific and space-saving arrangement on the PCB. Its primary areas of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular transmission pulses in the smallest spaces.Designed for maximum safety and efficiencyThe safety and durability of the SL-350PR are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and delivers a high level of intrinsic safety. Each cell is designed to consistently and safely deliver its energy over a very long period, which minimises maintenance costs and lowers the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series performs better under medium load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable energy supply for applications that regularly "wake up" to perform tasks. Characteristics  ModelTadiran SL-350/PR TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current60 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does connection with "radial pins" mean?In contrast to axial connections, which emerge centrally from the poles, radial pins are arranged so that they exit from one end face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate power requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for long-term use with minimal continuous current, such as for pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics where the battery is permanently soldered in and a long service life with regular power demand is essential. Example applications include compact wireless sensors, small medical devices and GPS trackers with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage, or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. The iXtra series is designed such that this layer is broken down more quickly under load and with less voltage drop than the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-350PT is a specialised primary battery based on lithium thionyl chloride ($Li-SOCl_{2}$), which is known for its extreme longevity and reliability. With its compact 1/2 AA design and a nominal voltage of 3.6 V it is the standard solution for industrial applications that require a constant power supply over many years with minimal self-discharge.This specific version has 3 PCB contacts (pins) in the configuration +1 / -2. This means that it has a positive pin on one side and two negative pins on the other side. This arrangement ensures reverse polarity protection and mechanically extremely stable mounting directly on the circuit board (PCB).Highlights at a glanceEnormous energy density: Despite its small size, offers a capacity of 1.2 Ah, ideal for long-life electronic components.Extreme shelf life: Thanks to minimal self-discharge (less than 1% per year at room temperature), a service life of up to 10-20 years possible.Wide temperature range: Works reliably under extreme conditions from -55°C to +85°C, which makes them ideal for outdoor applications.Stable discharge voltage: The voltage remains almost constant at a high level over almost the entire discharge time.Safe PCB mounting: The 3-pin configuration (+1/-2) enables vibration-proof soldering on boards and prevents assembly errors.Hermetically sealed: The housing is laser-sealed to prevent leakage and to protect the sensitive chemistry from environmental influences.Areas of applicationIndustrial controls (PLC)Used as a backup battery for data backup (RAM/RTC) in control systems from Siemens, ABB or Fanuc.Consumption meter (Metering)Used in smart gas, water, or electricity meters that must operate for more than a decade without battery replacement.Safety technologyPower supply for sensors, alarm systems, and surveillance devices in remote or difficult-to-access areas.Assembly & safety instructionsSoldering processWhen soldering to the PCB, the heat exposure should be kept as short as possible (max. 5 seconds at 260°C) to avoid damaging the internal seals of the battery.No rechargeThis is a primary battery. Attempting to charge it may result in explosions, fires, or the release of toxic gases.StorageStore the batteries in a cool and dry place. Avoid contact between the pins themselves or with conductive surfaces to prevent short circuits. Features ModelTadiran SL-350PT (1/2 AA) Chemical compositionLithium-thionyl chloride (**Li-SOCl2**) Rated voltage**3.6 V** Nominal capacity**1.2 Ah** (1200 mAh) Connection type**Solder tags (PT)** for PCB mounting Operating temperature**-55°C to +85°C** DimensionsØ 14.7 mm x 25.2 mm (1/2 AA) Max. continuous discharge current6 mA Special featureNot rechargeable (primary cell)  FAQs about the Tadiran SL-350PTWhy does the battery have two negative pins?For mechanical stability and reverse polarity protection. The two negative pins, together with the offset positive pin, form a triangular pattern on the PCB. This ensures that the battery can only be inserted in one direction, and it remains firmly in place even in case of vibrations.Can I replace the SL-350PT with a standard 1/2 AA battery?Only if the pin configuration is identical. There are 1/2 AA batteries with axial wires, simple solder tags or flat terminals. The replacement must have the grid dimensions and the pin layout of the SL-350PT (+1/-2) for fitting on the PCB.What does the "passivation effect" mean?A protective mechanism in lithium batteries. During long-term storage, a thin protective layer forms on the anode. This prevents self-discharge. When first used, the voltage may briefly drop slightly until the layer is removed by the flow of current.

The Tadiran SL-350P from the iXtra Series is a primary lithium thionyl chloride battery in the extremely compact 1/2 AA size. This special version is pre-assembled with robust axial connection wires, which allows flexible and safe installation by direct soldering. It was developed for miniaturised applications that combine a long lifetime with moderate current load capacity. With 3.6 V nominal voltage and a high capacity of 1.2 Ah, it is the ideal energy solution for professional electronics.Highlights at a glanceReady to install: With robust, axial wires for direct and safe soldering installation.Compact and powerful: Optimised for moderate loads in the miniaturised 1/2 AA size.High capacity: 1.2 Ah for long runtimes in small devices.High rated voltage: Stable voltage of 3.6 V over almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-350P has been specially developed for applications where both miniaturisation and improved power output are essential. The axial wires allow a secure and vibration-resistant integration without a battery holder. Its primary applications include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular transmission pulses in a confined space.Designed for maximum safety and efficiencyThe safety and longevity of the SL-350P are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period of time, reducing maintenance costs and lowering the total operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra Series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), optimised for minimal continuous currents, the SL-300 Series shows better behaviour for medium load demands and pulse currents. The passivation effect is overcome faster, resulting in a more stable power supply in applications that regularly "wake up" to perform tasks.Characteristics  ModelTadiran SL-350/P TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current60 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionAxial wires (P) RechargeableNo  FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires that emerge centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration allows very flexible assembly and a direct, firm connection to the electronics by soldering, without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics that require a long service life and where the cell is firmly soldered. Examples include compact wireless sensors, small medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and under no circumstances may it be recharged. Attempting to charge the cell is dangerous and may lead to overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra Series is designed so that this layer is broken down more quickly and with less voltage drop under load than in the SL-700 Series, which is beneficial for applications with regular current pulses.

The Tadiran SL-360S from the iXtra Series is a primary lithium thionyl chloride battery in the size AA (Mignon). It has been specially developed for applications that require a long service life in combination with moderate current capacity. With a high nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics that regularly require moderate current pulses. This model is the standard version for use in battery holders.Highlights at a glanceOptimised for moderate loads: High capacity and stable voltage even with moderate current requirements.Very high capacity: 2.4 Ah for a maximum extended and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V for almost the entire lifetime.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360S was specifically developed for applications where longevity and improved performance output are crucial. Its primary uses include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers, as well as industrial counters and measuring instruments (metering) that regularly transmit data. It is the ideal choice for all devices that operate independently for years and periodically require power for transmission or measurement operations.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360S is based on proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to supply its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra Series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series offers better performance with moderate load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply for applications that regularly "wake up" to perform tasks. Characteristics  ModelTadiran SL-360/S TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryWhat is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate current requirements (e.g. wireless sensors). It provides more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory back-up applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require long service life but regularly need power for functions such as sending data. Examples include wireless alarm systems, GPS trackers, data loggers and industrial wireless sensors.Does this model have solder terminals or wires?No, the model SL-360S is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers versions of this cell type with various solder terminals.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface which minimises self-discharge. The iXtra Series is designed so that this layer breaks down more quickly and with less voltage drop under load than with the SL-700 Series, which is advantageous for applications with regular current pulses.

The Tadiran SL-360T from the iXtra series is a primary lithium-thionyl chloride battery in the widely used AA (Mignon) size. It was specially developed for applications requiring a long service life in combination with moderate current carrying capacity. This version is pre-configured with solder tags (LF-U) for direct and secure mounting onto PCBs. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics that require regular power consumption.Highlights at a glanceOptimised for moderate loads: High capacity and stable voltage even for moderate current requirements.For PCB assembly: Pre-configured with solder tags for direct installation.Very high capacity: 2.4 Ah for maximally extended and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360T was specifically developed for applications where longevity and improved power output are crucial. The solder tags allow for a firm and permanent integration into the circuitry. Its primary areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial meters and measuring instruments (metering) that transmit data regularly.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-360T are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable, providing a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, which minimises maintenance costs and reduces the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide enhanced voltage stability under load. Compared to the standard series (SL-700), which is optimised for ultra-low continuous currents, the SL-300 series demonstrates superior performance under moderate load requirements and pulse currents. This overcomes the passivation effect more quickly, resulting in more reliable energy delivery for applications that regularly “wake up” to perform tasks. Features  ModelTadiran SL-360/T TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionSolder tag (T) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with solder tags mean?This model is equipped with metal contacts, known as solder tags, which allow easy and permanently secure attachment directly to a printed circuit board (PCB). This ensures excellent mechanical and electrical connection without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate current demand (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, however, is designed for absolute long-term use with the lowest possible continuous current, such as for pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics where the battery is soldered in place and a long service life with regular power demand is essential. Examples include wireless alarm systems, GPS trackers, and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer is reduced more quickly under load and with less voltage drop than with the SL-700 series, making it advantageous for applications with regular current pulses.

The Tadiran SL-360PR from the iXtra series is a primary lithium thionyl chloride battery in the widely used AA (Mignon) format. It was specially developed for applications requiring a long service life combined with moderate current capacity. This version is pre-fitted with radial pins for specific and safe mounting on PCBs. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it offers the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceFor PCB mounting: Pre-fitted with radial pins for direct installation.Optimised for moderate loads: High capacity and stable voltage even with moderate current demand.Very high capacity: 2.4 Ah for maximally extended and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V throughout nearly its entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PR was purpose-designed for applications where a long service life and improved power performance are crucial. The radial pins enable specific and space-saving placement on the PCB. Its main fields of application include wireless alarm and security systems, GPS tracking modules, professional two-way radios, data loggers as well as industrial meters and measuring devices (metering) that regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PR are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal, which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of inherent safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra series: The technology for higher performanceThe Tadiran iXtra series is designed to provide enhanced voltage stability under load. Compared to the standard series (SL-700), which is optimised for ultra-low continuous current, the SL-300 series performs better for medium load requirements and pulse currents. As a result, the passivation effect is impressed more quickly, delivering a more stable power supply in applications that "wake up" regularly to perform tasks. Features ModelTadiran SL-360/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does connection with "radial pins" mean?In contrast to axial connections, which exit centrally from the poles, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific PCB layouts and ensures particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers a more stable voltage under load. In contrast, the SL-700 series is designed for absolute long-term use with minimal continuous current, such as in pure memory-backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered in and a long service life with regular current demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can cause overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage loss under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-360PT from the iXtra series is a primary lithium thionyl chloride battery in the widely used size AA (Mignon). It was specially developed for applications requiring a long service life in combination with a moderate current load capacity. This version comes pre-assembled with axial pins for flexible and secure solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceReady to install: With robust, axial pins for direct solder mounting.Optimised for moderate loads: High capacity and stable voltage even with medium current demand.Very high capacity: 2.4 Ah for maximised and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PT was specifically developed for applications in which longevity and improved power delivery are crucial. The axial pins enable fixed and vibration-proof integration without a battery holder. Main areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial counters and measuring instruments (metering) that transmit data regularly.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PT are based on Tadiran's proven design. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces total operating costs for your application.iXtra series: The technology for higher performanceTadiran's iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better performance with moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply in applications which regularly "wake up" to perform tasks. Features  ModelTadiran SL-360/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative ends of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and long-lasting solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is permanently soldered and a long service life with regular power demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-360P from the iXtra series is a primary lithium-thionyl chloride battery in the AA (Mignon) size. This special version is pre-configured with robust axial connection wires, enabling flexible and secure installation by direct soldering. It was designed for applications combining long lifetime with moderate current-carrying capability. With 3.6 V nominal voltage and a very high capacity of 2.4 Ah, it is the ideal power solution for professional electronics that regularly require moderate current pulses.Highlights at a glanceReady to install: With robust, axial wires for direct and safe soldering installation.Optimised for moderate loads: High capacity and stable voltage even at medium current demand.Very high capacity: 2.4 Ah for maximum extended and autonomous operating duration.High nominal voltage: Stable voltage level of 3.6 V over almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-360P was specifically developed for applications where longevity and improved power delivery are crucial. The axial wires enable secure and vibration-proof integration without a battery holder. Its main areas of application include wireless alarm and security systems, GPS tracking modules, professional radio devices, data loggers as well as industrial counters and measuring instruments (metering), which regularly transmit data.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360P are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, thus minimising maintenance costs and reducing the overall operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimum continuous currents, the SL-300 series shows improved performance with medium load requirements and pulse currents. The passivation effect is thereby more quickly overcome, leading to a more stable power supply in applications which regularly "wake up" to perform tasks.Features  ModelTadiran SL-360/P TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial wires (P) RechargeableNo  FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires that exit centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration allows for very flexible installation and direct, firm connection to the electronics by soldering, without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require a long service life, but regularly need power for functions such as data transmission. The axial wires make it perfect for installations where the cell must be firmly soldered.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is dangerous and may result in overheating, leakage, or the cell bursting.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed so that this layer is broken down more quickly and with less voltage drop under load than with the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-361T from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA format. It was specially developed for applications that require a long service life combined with moderate current capacity. This variant comes with solder tabs (LF-U) pre-configured for direct and safe mounting on PCBs. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal power solution for professional miniaturised electronics.Highlights at a glanceCompact and powerful: Optimised for moderate loads in the compact 2/3 AA format.For PCB mounting: Pre-configured with solder tabs for direct installation.High capacity: 1.6 Ah for long runtimes in compact devices.High nominal voltage: Stable voltage of 3.6 V over almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-361T was specifically developed for applications where both miniaturisation and improved power output are critical. The solder tabs enable a reliable and permanent integration into the circuit. Its primary fields of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices, and other professional electronics that require regular transmission pulses in the smallest of spaces.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361T are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.iXtra series: The technology for higher performanceThe Tadiran iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better behaviour under moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable energy supply in applications that regularly "wake up" to perform tasks.Features  ModelTadiran SL-361/T TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionSolder tab (T) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with solder tabs mean?This model is equipped with metal contacts known as solder tabs, which can be soldered directly onto a printed circuit board (PCB) for easy and permanently secure fastening. This ensures excellent mechanical and electrical connection without the need for a battery holder.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with very low continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics, where the battery is permanently soldered and long service life with regular current demand is crucial. Examples are compact wireless sensors, small medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After extended storage, a protective layer forms on the lithium surface that minimises self-discharge. The iXtra series is designed so that this layer is broken down faster and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-361PR from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA format. It was specially developed for applications requiring a long service life in combination with moderate current capacity. This version comes pre-configured with radial pins for specific and secure mounting on PCBs. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal energy solution for professional, miniaturised electronics.Highlights at a glanceFor PCB mounting: Pre-configured with radial pins for direct installation.Compact and powerful: Optimised for moderate loads in the compact 2/3 AA size.High capacity: 1.6 Ah for long runtimes in compact devices.High rated voltage: Stable voltage of 3.6 V throughout almost the entire operating life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a variety of applicationsThe Tadiran SL-361PR was specifically developed for applications where both miniaturisation and enhanced power delivery are crucial. The radial pins allow specific and space-saving arrangement on the PCB. Its main areas of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring equipment, and other professional electronics that require regular transmission pulses in extremely small formats.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361PR are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period of time, reducing maintenance costs and lowering the total operating costs of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for very low continuous currents, the SL-300 series behaves better with moderate load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in more stable power in applications that regularly "wake up" to perform tasks. Specifications  ModelTadiran SL-361/PR TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit centrally from the terminals, radial pins are arranged so that they leave from one face of the battery. This configuration is optimised for specific PCB (printed circuit board) layouts and enables particularly stable and defined mounting of the cell.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with the lowest continuous current, such as memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics where the battery is soldered in place and a long service life with regular power requirements is crucial. Examples include compact wireless sensors, small medical devices, and GPS trackers with special PCB designs.Is this battery rechargeable?No, this is a primary lithium battery and must never be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leaks, or bursting of the cell.What does the passivation effect mean in this battery?After long storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is constructed so that this layer is reduced under load faster and with lower voltage drop than in the SL-700 series, which is beneficial for applications with regular current pulses.

The Tadiran SL-361PT from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA format. It was specially developed for applications that require a long service life in combination with moderate current-carrying capacity. This version is pre-assembled with axial pins for flexible and secure soldering assembly. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal energy solution for professional, miniaturised electronics.Highlights at a glanceReady to install: With robust, axial pins for direct soldering assembly.Compact and powerful: Optimised for moderate loads in the compact 2/3 AA format.High capacity: 1.6 Ah for long runtimes in compact devices.High rated voltage: Stable voltage position of 3.6 V for almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-361PT was specifically developed for applications where both miniaturisation and enhanced power output are essential. The axial pins allow for solid and vibration-resistant integration without a battery holder. Its primary areas of application include compact wireless sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular pulse transmission in very confined spaces.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361PT are based on Tadiran's proven design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra series from Tadiran is designed to offer improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series demonstrates better behaviour under medium load conditions and pulse currents. The passivation effect is thus overcome more quickly, resulting in more stable power supply in applications that regularly "wake up" to perform tasks. Features  ModelTadiran SL-361/PT TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connecting wires (pins) that exit centrally from the positive and negative poles of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and permanent soldered connection.What is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimum continuous current, such as for pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for miniaturised electronics, where the battery is permanently soldered and a long service life with regular power requirements is essential. Examples include compact wireless sensors, miniature medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must never be recharged under any circumstances. Attempting to recharge the cell is dangerous and can lead to overheating, leakage or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. The iXtra series is designed to ensure that this layer is broken down faster and with lower voltage drop under load than with the SL-700 series, which is advantageous for applications with regular pulse currents.

The Tadiran SL-361P from the iXtra series is a primary lithium thionyl chloride battery in the compact 2/3 AA size. It was specially developed for applications that require a long service life combined with a moderate current load. This version is pre-configured with axial wire (pins) for flexible and secure solder mounting. With 3.6 V nominal voltage and 1.6 Ah capacity, it is the ideal energy solution for professional, miniaturised electronics.Highlights at a glanceReady to install: With robust, axial wire for direct solder mounting.Compact and powerful: Optimised for moderate loads in the compact 2/3 AA size.High capacity: 1.6 Ah for long runtimes in compact devices.High rated voltage: Stable voltage of 3.6 V throughout almost the entire lifespan.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-361P was specifically developed for applications where both miniaturisation and enhanced power output are crucial. The axial wire enables firm and vibration-proof integration without a battery holder. Its primary fields of application include compact radio sensors, miniaturised GPS trackers, medical monitoring devices and other professional electronics that require regular transmission pulses in the smallest space.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-361P are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal, reliably preventing electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Every cell is designed to deliver its energy consistently and safely over a very long period of time, minimising maintenance costs and reducing the total cost of ownership of your application.iXtra series: The technology for higher performanceThe iXtra series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series demonstrates better performance with medium load demands and pulse currents. The passivation effect is overcome more rapidly, resulting in a more stable power supply in applications that regularly "wake up" to perform tasks. Features  ModelTadiran SL-361/P TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current70 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial wire (P) RechargeableNo  FAQs about this Tadiran batteryWhat does the "axial wire" connection mean?This model is equipped with connection wires (pins) that emerge from the centre of the positive and negative terminals of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and durable solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, which includes this cell, is optimised for applications with moderate current requirements (e.g. radio sensors). It offers more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideal for miniaturised electronics in which the battery is firmly soldered and a long service life with regular power requirements is crucial. Examples include compact wireless sensors, small medical devices and GPS trackers.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and may lead to overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After prolonged storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Tadiran SL-550S is a special high-temperature lithium thionyl chloride battery in the extremely compact 1/2 AA form factor. It is designed for maximum reliability and long service life under extreme thermal loads. With its ability to operate continuously at temperatures of up to +130 °C, it sets the standard for the most demanding industrial applications. It offers a nominal voltage of 3.6 V, a capacity of 0.8 Ah, and in this S version is intended for use in battery holders.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Maximum reliability: Designed for use under the harshest environmental conditions.Compact form: 1/2 AA size for use in miniaturised high-temperature applications.High nominal voltage: Stable voltage level of 3.6 V even at high temperatures.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550S was specifically developed for applications where standard lithium batteries would fail due to high temperatures. Its primary areas of application include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring of industrial high-temperature processes, as well as use in autoclaves and medical sterilisation equipment. It is also the first choice for demanding military and aerospace systems.Engineered for maximum heat resistanceThe exceptional thermal load resistance of the SL-550S is based on its reinforced construction and an optimised electrolyte chemistry. The hermetic glass-to-metal seal is specially designed to maintain its integrity and prevent leakage even during repeated temperature cycles. The non-flammable electrolyte and robust stainless steel casing ensure maximum safety, even at the upper temperature limit.Superior high-temperature technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity. A characteristic feature is the passivation effect, which minimises self-discharge and enables a storage life of over 10 years. This high-temperature version maintains its performance and reliability even under conditions far outside the specifications of conventional batteries. Features  ModelTadiran SL-550/S TechnologyLithium-thionyl chloride (high temperature) Form factor1/2 AA Nominal voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran high-temperature batteryWhat sets this battery apart from a standard Tadiran cell?The key difference is the extended operating temperature range of up to +130 °C, whereas standard cells such as the SL-750 are only specified up to +85 °C. This is made possible by a special, heat-resistant internal construction and adapted chemistry that ensures reliable operation in extreme heat.For which applications is this battery type essential?This battery type is required for all devices whose operating temperature permanently or periodically rises above +85 °C. Typical examples are measuring instruments in oil production, sensors in the engine compartment of vehicles, or electronics used in industrial furnaces or autoclaves.Does this model have solder terminals or wires?No, the SL-550S model is the standard version with normal battery contacts and is intended for use in a suitable 1/2 AA battery holder. For direct installation, Tadiran also offers high-temperature variants with various solder terminals.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Trying to charge the cell is especially dangerous at high temperatures.Does the high temperature affect the battery service life?Yes, as with any battery, consistently high operating temperature leads to increased self-discharge and may shorten overall service life compared to operation at room temperature. However, the SL-550S is specifically engineered to minimise this effect and achieve the longest possible life under these tough conditions.

The Tadiran SL-550PR is a special high-temperature lithium-thionyl chloride battery in the extremely compact size 1/2 AA. It was designed for maximum reliability and a long service life under extreme thermal stress. With its ability to operate continuously at temperatures of up to +130 °C, it is the ideal energy solution for miniaturised industrial applications. This version is pre-assembled with radial pins for direct and secure mounting on circuit boards.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.For PCB mounting: Pre-assembled with radial pins for direct installation.Extremely compact format: 1/2 AA size for miniaturised high-temperature applications.High rated voltage: Stable voltage level of 3.6 V even at extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550PR was specifically developed for applications in which standard lithium batteries would fail due to high temperatures and a permanent soldering connection is required. The radial pins allow a specific and space-saving arrangement on the PCB. Its main areas of application include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring of industrial high-temperature processes, as well as use in autoclaves and medical sterilisation equipment.Engineered for maximum heat resistanceThe exceptional thermal load capacity of the SL-550PR is based on its reinforced construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is specifically designed to maintain its integrity even under repeated temperature cycles and to prevent leakage. The non-flammable electrolyte and robust stainless steel casing ensure maximum safety, even at the upper end of the temperature range.Superior high-temperature technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and enables a shelf life of over 10 years. This high-temperature variant maintains its performance and reliability even under conditions well outside the specifications of conventional batteries. Features  ModelTadiran SL-550/PR TechnologyLithium-thionyl chloride (high temperature) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran high-temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The crucial difference is the extended operating temperature range of up to +130 °C, while standard cells such as the SL-750 are only specified up to +85 °C. This is achieved by a special, heat-resistant internal construction and a customised chemistry, guaranteeing reliable operation under extreme heat.What does the connection with "radial pins" mean?Unlike axial connections that exit from the centre of the poles, radial pins are arranged so that they extend from one end face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.For which applications is this battery type essential?This battery type is essential for all devices whose operating temperature continuously or periodically exceeds +85 °C. Typical examples include measuring instruments for oil production, sensors in vehicle engine compartments or electronics used in industrial ovens or autoclaves.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is extremely dangerous, especially at high temperatures.Does the high temperature affect the service life of the battery?Yes, as with any battery, a permanently high operating temperature leads to increased self-discharge and can shorten the total service life compared to operation at room temperature. However, the SL-550PR is specifically engineered to minimise this effect and achieve the maximum possible service life under these harsh conditions.

The Tadiran SL-550PT is a special high-temperature lithium thionyl chloride battery in the extremely compact size 1/2 AA. It was designed for maximum reliability and long operational life under extreme thermal stress. With the ability to operate continuously at temperatures up to +130 °C, it is the ideal energy solution for miniaturised industrial applications. This version comes equipped with robust axial pins for direct and secure assembly on circuit boards.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Ready to install: With robust, axial pins for direct solder mounting.Extremely compact design: 1/2 AA size for miniaturised high-temperature applications.High rated voltage: Stable voltage of 3.6 V even under extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550PT was specifically developed for applications where standard lithium batteries would fail due to high temperatures and a fixed solder connection is required. Thanks to its miniaturised 1/2 AA size, it is ideal for devices with space constraints. Its primary areas of application include oil and gas exploration (e.g. downhole drilling measurement technology), automotive use in engine compartments, monitoring of industrial high-temperature processes, as well as use in autoclaves and medical sterilisation devices.Engineered for maximum heat resistanceThe outstanding thermal durability of the SL-550PT is based on its reinforced construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is specifically designed to maintain its integrity and prevent leaks even with repeated thermal cycling. The non-flammable electrolyte and robust stainless steel shell ensure maximum safety, even at the upper end of the temperature range.Superior high-temperature technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-500 series is renowned for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and allows storage for over 10 years. This high-temperature version retains its performance and reliability even under conditions that are far outside the specifications of standard batteries.Features  ModelTadiran SL-550/PT TechnologyLithium thionyl chloride (high temperature) Size1/2 AA Rated voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran high-temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The key difference is the extended operating temperature range of up to +130 °C, while standard cells such as the SL-750 are only specified up to +85 °C. This is achieved by a special heat-resistant internal construction and adapted chemistry to ensure reliable operation in extreme heat.What does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative pole of the cell. This configuration is designed for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent soldered connection.For which applications is this battery type essential?This battery type is required for all devices where the operating temperature permanently or periodically rises above +85 °C. Typical examples are measuring instruments in oil production, sensors in the engine compartment of vehicles, or electronics used in industrial ovens or autoclaves.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is extremely dangerous, especially at high temperatures.Does high temperature affect the battery's lifetime?Yes, as with any battery, permanently high operating temperature leads to increased self-discharge and can shorten the overall lifetime compared to room temperature operation. However, the SL-550PT is specially engineered to minimise this effect and achieve the maximum possible lifetime under these harsh conditions.

The Tadiran SL-550P is a special high-temperature lithium thionyl chloride battery in the extremely compact 1/2 AA format. It was designed for maximum reliability and long service life under extreme thermal loads. With its ability to operate continuously at temperatures up to +130 °C, it is the ideal energy solution for miniaturised industrial applications. This version comes with robust axial pins pre-configured for direct and secure mounting on circuit boards.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Ready to install: With robust axial pins for direct solder mounting.Extremely compact design: 1/2 AA size for miniaturised high-temperature applications.High nominal voltage: Stable voltage level of 3.6 V even in extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-550P was specifically developed for applications where standard lithium batteries would fail due to high temperatures and a permanent solder connection is required. Thanks to its miniaturised 1/2 AA size, it is ideal for space-critical devices. Its primary fields of application include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring industrial high-temperature processes and use in autoclaves and medical sterilisation equipment.Designed for maximum heat resistanceThe exceptional thermal endurance of the SL-550P is based on its reinforced construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is specially designed to preserve its integrity and prevent leakage even during repeated temperature cycles. The non-flammable electrolyte and robust stainless steel casing ensure the highest level of safety, even at the upper end of the temperature range.Superior high-temperature technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and enables a shelf life of over 10 years. This high-temperature version retains its performance and reliability even under conditions that are far outside the specifications of conventional batteries. Characteristics  ModelTadiran SL-550/P TechnologyLithium thionyl chloride (high temperature) Format1/2 AA Nominal voltage (V)3.6 Capacity (mAh)800 Max. continuous discharge current35 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 10 ConnectionAxial pins (P) RechargeableNo  FAQs about this Tadiran high-temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The decisive difference is the extended operating temperature range of up to +130 °C, while standard cells such as the SL-750 are specified only up to +85 °C. This is achieved by a special heat-resistant internal construction and a customised chemistry, which ensure reliable operation in extreme heat.What does the connection with "axial pins" mean?This model is fitted with connection wires (pins) that protrude centrally from the positive and negative terminals of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent solder connection.For which applications is this battery type essential?This battery type is required for all devices whose operating temperature permanently or periodically exceeds +85 °C. Typical examples include instrumentation in oil production, sensors in the engine compartment of vehicles, or electronics used in industrial ovens or autoclaves.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is extremely dangerous, especially at high temperatures.Does high temperature affect battery life?Yes, as with any battery, a permanently high operating temperature leads to increased self-discharge and can reduce total life compared to operation at room temperature. However, the SL-550P is specially designed to minimise this effect and achieve the maximum possible life under these harsh conditions.

The Tadiran SL-560S is a special high-temperature lithium thionyl chloride battery in the widely used AA (Mignon) format. It has been designed for maximum reliability and long operating life under extreme thermal stress. With its ability to operate continuously at temperatures of up to +130 °C, it sets the standard for the most demanding industrial applications in the common AA format. It offers a nominal voltage of 3.6 V, a capacity of 1.7 Ah and, in this S version, is intended for use in battery holders.Highlights at a glanceExtreme temperature range: Reliable operation from -55 °C to +130 °C.Standardised format: AA / Mignon for broad compatibility in high temperature applications.High capacity: 1.7 Ah especially for optimised use at high temperatures.High nominal voltage: Stable voltage of 3.6 V even at extreme heat.Outstanding longevity: Very low self-discharge and proven long-term stability.Powerful in extreme applicationsThe Tadiran SL-560S was specifically developed for applications where standard lithium batteries would fail due to high temperatures. The standard AA size allows its use in many existing device designs. Its primary applications include oil and gas exploration (e.g. "downhole drilling" measurement technology), automotive applications in the engine compartment, monitoring industrial high-temperature processes, as well as use in autoclaves and medical sterilisation equipment.Designed for maximum heat resistanceThe exceptional thermal resistance of the SL-560S is based on its reinforced construction and an optimised electrolyte chemistry. The hermetic glass-to-metal seal is specially designed to maintain its integrity even under repeated temperature cycles and to prevent leaks. The non-flammable electrolyte and robust stainless steel housing ensure the highest level of safety, even at the upper limit of the temperature range.Superior high temperature technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-500 series is known for its longevity under extreme conditions. A characteristic feature is the passivation effect, which minimises self-discharge and enables a shelf life of over 10 years. This high-temperature variant retains its performance and reliability even under conditions far beyond the specifications of conventional batteries. Features  ModelTadiran SL-560/S TechnologyLithium thionyl chloride (high temperature) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)1700 Max. continuous discharge current70 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +130 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 19 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran high temperature batteryWhat distinguishes this battery from a standard Tadiran cell?The main difference is the extended operating temperature range of up to +130 °C, whereas standard cells such as the SL-760 are only specified up to +85 °C. This is achieved by a special heat-resistant internal design and adapted chemistry, which ensures reliable operation in extreme heat.For which applications is this battery type indispensable?This battery type is required for all devices whose operating temperature rises permanently or periodically above +85 °C. Typical examples are measuring instruments in oil production, sensors in the engine compartment of vehicles or electronics used in industrial ovens or autoclaves.Does this model have solder tabs or wires?No, the SL-560S model is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers high temperature versions with various solder tabs.Is this battery rechargeable?No, this is a primary lithium battery and must under no circumstances be recharged. Attempting to charge the cell is extremely dangerous, especially at high temperatures.Does the high temperature affect the service life of the battery?Yes, as with any battery, permanently high operating temperature leads to increased self-discharge and can shorten the total service life compared to operation at room temperature. However, the SL-560S has been specially designed to minimise this effect and achieve the maximum possible service life under these tough conditions.

The Tadiran SL-750S is a primary high-performance lithium thionyl chloride battery in the extremely compact 1/2 AA format. It has been developed for maximum reliability and a very long service life in miniaturised and space-constrained applications. With a nominal voltage of 3.6 V and a capacity of 1.0 Ah, it is the ideal energy solution for professional electronics that require maximum performance in a minimum of space. This model is the standard version for use in suitable battery holders.Highlights at a glanceExtremely compact form factor: 1/2 AA size for maximum miniaturisation of your application.Reliable capacity: 1.0 Ah for a long and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of under 1% per year.Outstanding longevity: Designed for an operational and storage life of over 10 years.Extensive temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-750S is your first choice when space is the limiting factor. Its extremely small form factor makes it indispensable for compact sensors, medical devices (e.g. in diagnostics), memory backups (RTC, CMOS) on densely packed circuit boards, and for military applications. It is perfectly suited to all devices that require a long-lasting and reliable energy source, but do not offer space for a standard AA cell.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-750S are based on its well-conceived construction. The cell features a hermetic glass-to-metal seal that reliably prevents the leakage of electrolyte. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Every cell is designed to release its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total cost of ownership of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers decisive advantages for long-term use. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, drastically reducing self-discharge and thus allowing for extremely long shelf life. This technology ensures that the energy is still almost fully available even after years of storage, setting the SL-750S apart from all other battery technologies. Features  ModelTadiran SL-750/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.Does this model have solder tags or wires?No, the model SL-750S is the standard version with conventional battery contacts and is intended for use in a suitable 1/2 AA battery holder. For direct installation on circuit boards, Tadiran offers variants of this cell type with different solder tags.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. At initial load, this layer can cause a short voltage delay. For applications that require immediate high pulse currents, appropriate circuit designs or special battery types should be considered.What devices is this battery type suitable for?This battery type is designed exclusively for professional and industrial electronics with very limited space. This includes compact sensors, memory backup, compact medical devices, and demanding location systems.How long does the battery last and how should it be stored?The battery has a shelf life of over 10 years. For maximum longevity, we recommend storing it in a cool, dry place with low humidity. 

The Tadiran SL-750T is a primary high-performance lithium thionyl chloride battery in the extremely compact size 1/2 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long operating life with minimal self-discharge. This version is pre-assembled with solder tabs (LF-U) for direct and secure mounting on PCBs, making it ideal for miniaturised “Fit and Forget” applications.Highlights at a glanceMaximum lifespan: Extremely low self-discharge of less than 1% per year.For PCB mounting: Pre-assembled with solder tabs for direct installation.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.High nominal voltage: Stable voltage of 3.6 V for almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-750T was specifically developed for long-term applications with low continuous current where the battery is permanently integrated into the electronics and installation space is limited. Its primary applications include memory backups (RTC, CMOS) in compact industrial controllers, miniaturised metering technology and wireless security sensors. It is the perfect choice for all devices that need to operate independently for over a decade without battery replacement.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-750T are based on Tadiran’s proven design. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, minimising maintenance costs and reducing your application’s total operating costs.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirement. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating capability. This ensures that the energy remains reliably available even after many years. Features  ModelTadiran SL-750/T TechnologyLithium-thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionSolder tab (T) RechargeableNo  FAQs about this Tadiran batteryWhat does connection with solder tabs mean?This model is equipped with metal contacts, known as solder tabs, which can be soldered directly onto a printed circuit board (PCB) for a simple and permanently secure mounting. This ensures excellent mechanical and electrical connectivity without the need for a battery holder.What is the advantage of the SL-700 series compared to other series?The SL-700 series is optimised for the lowest possible self-discharge. It is the best choice for applications that require very little power for many years, such as data retention (memory backup). In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current demand.For which devices is this battery type suitable?This type of battery is ideal for miniaturised professional electronics in which the battery is permanently soldered and an extremely long service life is essential. Typical applications are compact meters, miniature industrial controllers and security sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is responsible for the extremely low self-discharge. When first used, it can cause a brief voltage delay. This should be considered in circuit design for applications that require current immediately after activation.

The Tadiran SL-750PT is a primary high-performance lithium thionyl chloride battery in the extremely compact size 1/2 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version is preconfigured with axial pins for flexible and secure solder assembly, making it ideal for miniaturised "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.Ready to install: With robust, axial pins for direct solder assembly.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.High rated voltage: Stable voltage of 3.6 V during nearly the entire service life.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-750PT was specifically developed for long-term applications with low continuous current, where the battery is firmly integrated into the electronics and the installation space is limited. The axial pins enable flexible integration into the circuit. Its primary fields of application include memory backups (RTC, CMOS) in compact industrial controls, miniaturised metering technology, and durable wireless security sensors.Designed for maximum safety and efficiencyThe safety and longevity of the SL-750PT are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents leakage of the electrolyte. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces the total operating costs of your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long shelf and operating life. This ensures that the energy is reliably available even after many years. Features  ModelTadiran SL-750/PT TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Rated voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge from the centre of the positive and negative pole of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and permanent solder connection.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolutely lowest self-discharge. It is the best choice for applications that require very little current over many years, such as memory retention (memory backup). In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This battery type is ideal for miniaturised professional electronics, where the battery is permanently soldered and an extremely long service life is crucial. Typical applications are compact counters, miniature industrial controllers, and long-life security sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may result in overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. During the first load, it can cause a brief voltage delay. This should be considered in the circuit design for applications that require current immediately after activation.

The Tadiran SL-750PR is a primary high-performance lithium-thionyl chloride battery in the extremely compact size 1/2 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version is preassembled with radial pins for specific and secure mounting on PCBs, making it ideal for miniaturised "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.For PCB mounting: Preassembled with radial pins for direct installation.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-750PR has been specifically developed for long-term applications with low continuous current, where the battery is permanently integrated into the electronics and the installation space is limited. The radial pins allow a specific and space-saving arrangement on the PCB. The main areas of application are memory backups (RTC, CMOS) in compact industrial controllers, miniaturised metering technology and long-life wireless safety sensors.Designed for maximum safety and efficiencyThe safety and longevity of the SL-750PR are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.Superior lithium-thionyl chloride technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, reducing the self-discharge to an absolute minimum and thus enabling extremely long storage and operating periods. This ensures that the energy is reliably available even after many years. Features  ModelTadiran SL-750/PR TechnologyLithium-thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which emerge from the centre of the terminals, radial pins are arranged so that they emerge from one face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series compared to other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that need very little power over many years, such as memory backup. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This battery type is ideal for miniaturised professional electronics, where the battery is permanently soldered and an extremely long service life is crucial. Typical applications are compact counters, industrial mini controllers and long-life safety sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not under any circumstances be recharged. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. During the first load, it can cause a short voltage delay. This should be taken into account in the circuit design for applications that require current immediately after activation.

The Tadiran SL-750P is a primary high-performance lithium thionyl chloride battery in the extremely compact 1/2 AA size. This special version is pre-assembled with robust axial connection wires, allowing flexible and direct installation in electronic assemblies. With a nominal voltage of 3.6 V and a capacity of 1.0 Ah, it is the ideal energy solution for professional, miniaturised applications where longevity and fixed integration are essential.Highlights at a glanceReady to install: With robust, pre-assembled axial wires for direct mounting.Extremely compact design: 1/2 AA size for maximum miniaturisation of your application.Reliable capacity: 1.0 Ah for a long and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-750P is the first choice when space is the limiting factor and a fixed, soldered connection is required. The axial wires allow flexible and direct integration into the circuit without the need for a battery holder. It is indispensable for compact sensors, medical devices, memory backups (RTC, CMOS) on densely packed boards, and for military applications where vibration resistance is a high priority.Designed for maximum safety and efficiencyThe safety and longevity of the SL-750P are based on its well-thought-out construction. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) provides crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, drastically reducing self-discharge and enabling the extremely long shelf life. This technology ensures that even after years of storage, the energy is still almost fully available, setting the SL-750P apart from all other battery technologies. Characteristics  ModelTadiran SL-750/P TechnologyLithium thionyl chloride (Li-SOCl₂) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1000 Max. continuous discharge current30 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionAxial wires (P) RechargeableNo  FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage or explosion of the cell.What does the "axial wire" connection mean?This model is equipped with connection wires that run out from the centre of the positive and negative poles of the cell in opposite directions along the longitudinal axis. This configuration allows very flexible mounting and direct connection to the electronics by soldering, without the need for a battery holder.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the surface of the lithium, which minimises self-discharge. When the load is first applied, this layer may cause a short voltage delay. For applications that require immediate high current pulses, appropriate circuit designs or special battery types should be considered.For which devices is this battery type suitable?This battery type is designed exclusively for professional and industrial electronics with very limited space, where the cell is soldered directly. These include compact sensors, memory backup and small medical devices.What is the shelf life of the battery and how should it be stored?The battery has a shelf life of over 10 years. For maximum longevity, we recommend storing it in a cool, dry place with low humidity.

The Tadiran SL-760S is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). It was developed for maximum reliability and an extremely long service life. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional electronic applications that require a durable and stable power supply in a standard format. This model is the standard version for use in battery holders.Highlights at a glanceStandardised design: Common size AA (Mignon) for broad compatibility.High capacity: 2.2 Ah for a very long and autonomous service life.High nominal voltage: Stable voltage level of 3.6 V over almost the entire lifetime.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding durability: Designed for an operating and storage life of more than 10 years.Extreme temperature range: Fully functional within a temperature range from -55 °C to +85 °C.Powerful in diverse applicationsThe Tadiran SL-760S is the perfect choice to replace conventional batteries in devices where frequent battery changes are undesirable or costly. It is excellently suited for professional original equipment in metering technology (water, gas, electricity), for memory backup (RTC, CMOS) in computers and controllers, as well as in alarm systems, security systems and industrial sensors that use AA battery holders.Designed for maximum safety and efficiencyThe safety and durability of the SL-760S are based on its carefully thought-out construction. The cell features a hermetic glass-metal seal which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Every cell is designed to deliver its energy constantly and safely over a very long period, which minimises maintenance costs and lowers the overall operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers decisive advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, significantly reducing self-discharge and thus enabling extremely long shelf life. This technology ensures that energy is still almost completely available even after years of storage, setting the SL-760S apart from all other battery technologies. Features  ModelTadiran SL-760/S TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can result in overheating, leakage or bursting of the cell.Does this model have solder terminals or wires?No, the model SL-760S is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation on circuit boards, Tadiran offers variants of this cell type with different solder connections (e.g. solder tags or axial wires).What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. On first use, this layer can cause a brief voltage delay. For applications that require immediate high current pulses, corresponding circuit designs or special battery types should be considered.For which devices is this battery type suitable?This battery type is designed exclusively for professional and industrial electronics. These include, among others, meters, memory backup, security technology, medical devices and sophisticated tracking systems that use AA batteries.How long is the battery shelf life and how should it be stored?The battery has a shelf life of more than 10 years. For maximum shelf life, we recommend storage in a cool and dry place with low humidity.

The Tadiran SL-760T is a primary high-performance lithium thionyl chloride battery in AA (Mignon) size, developed for maximum reliability and an extremely long service life. With a nominal voltage of 3.6 V and a capacity of 2.2 Ah, it is the ideal energy solution for professional electronic applications in which battery replacement is not possible or desired for years. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceHigh rated voltage: Stable voltage level of 3.6 V throughout almost the entire lifetime.Maximum reliability: Extremely low self-discharge rate of below 1% per year.Outstanding longevity: Designed for an operational and storage lifetime of over 10 years.Extreme temperature range: Fully functional in a temperature range from -55 °C to +85 °C.High energy density: One of the highest energy densities of all primary lithium batteries.Reliable performance for critical applicationsThe Tadiran SL-760T was specially developed for long-term applications with low continuous current and periodic high peaks. It is the preferred choice for professional original equipment in metering technology (water, gas, electricity), for memory backup (RTC, CMOS), in alarm and security systems as well as in industrial control systems (PLC). Its reliability also makes it indispensable for GPS tracking systems, automotive electronics and military applications where failure is not an option.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760T are based on its well-designed construction. The cell features a hermetic glass-to-metal seal, which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, drastically reducing self-discharge and thus enabling extremely long shelf life. This technology ensures that the energy is still almost completely available even after years of storage, which sets the SL-760T apart from all other battery technologies.Characteristics  ModelTadiran SL-760/T TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. constant discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionSolder tag (T-form) RechargeableNo  FAQs about the Tadiran SL-760T batteryIs this battery rechargeable?No, the Tadiran SL-760T is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. At first load, this layer can cause a brief voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types such as the Tadiran PulsesPlus series should be considered.How long is the battery's shelf life and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storage in a cool and dry place with low humidity.For which devices is this battery type suitable?This battery type is designed exclusively for professional and industrial electronics. These include electricity, water and gas meters, memory backup, security technology, medical devices and advanced locating systems.What does the "CLG 3mm solder tag" connection mean?This model comes from the factory with a special 3mm wide solder tag (CLG configuration). This connection makes it easy and safe to solder the cell directly to circuit boards or into electronic assemblies, ensuring a permanently stable electrical connection.What makes this battery safer than other battery types?Safety is ensured by several factors: the hermetic glass-to-metal seal prevents leaks, the inorganic electrolyte is non-flammable, and the cell is not pressurised at room temperature. This ensures a high degree of operational safety.

The Tadiran SL-760PT is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimum self-discharge. This version is factory-fitted with a special 3-pin configuration (+1 pin / -2 pins) for particularly stable and secure mounting on PCBs. With 3.6 V nominal voltage and 2.2 Ah capacity, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of under 1% per year.Stable PCB mounting: Factory-fitted with 3 radial pins (+1/-2) for maximum mechanical stability.High capacity: 2.2 Ah in standardised AA (Mignon) size.High nominal voltage: Stable voltage of 3.6 V for almost the entire lifetime.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-760PT was specifically developed for long-term applications with low continuous current, where the battery is securely and vibration-resistantly integrated into the electronics. The 3-pin configuration provides superior mechanical stability on the circuit board. Its main areas of use include memory backups (RTC, CMOS) in industrial controllers (PLC), metering technology (metering for water, gas, electricity), as well as long-lasting security technology and alarm systems.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760PT are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period of time, minimising maintenance costs and reducing the total cost of ownership for your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low power requirements. A distinctive feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to an absolute minimum, thus enabling extremely long shelf and operating life. This ensures that the energy is reliably available even after many years. Features  ModelTadiran SL-760/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 Connection3 pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat is the advantage of the 3-pin configuration (+1/-2)?This special arrangement with one positive and two negative pins provides exceptionally high mechanical stability when the cell is soldered to a printed circuit board (PCB). It reliably prevents the cell from twisting or wobbling, making it ideal for devices exposed to vibrations or mechanical stress.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This battery type is ideal for professional electronics where the battery is permanently soldered and an extremely long service life and high mechanical stability are crucial. Typical uses include meters, industrial computers, and alarm systems.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can cause overheating, leakage, or bursting of the cell.What does the passivation effect mean in this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. During the first load, it can cause a brief voltage delay. This should be taken into account in circuit designs for applications that require current immediately after activation.

The Tadiran SL-760PR is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimum self-discharge. This version is pre-configured with radial pins (+/- 1 pin) for the direct and secure mounting on PCBs. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.For PCB mounting: Pre-configured with radial pins (+/- 1 pin) for direct installation.High capacity: 2.2 Ah in standardised AA (Mignon) format.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-760PR was specifically developed for long-term applications with low continuous current, in which the battery is permanently integrated into the electronics. The radial pins enable a specific and space-saving arrangement on the PCB. Its primary areas of application include memory backups (RTC, CMOS) in industrial control systems (PLC), metering technology (metering for water, gas, electricity) as well as long-life security technology and alarm systems in the common AA format.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760PR are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, reducing maintenance costs and the total operating costs of your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to an absolute minimum, enabling extremely long storage and operational capability. This ensures that energy is reliably available even after many years. Features  ModelTadiran SL-760/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit from the centre of the terminals, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current demand.For which devices is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered and an extremely long service life is decisive. Typical applications are meters, industrial computers, alarm systems and long-life sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or rupture of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first use, it can lead to a short voltage delay. This should be considered in circuit design for applications that require current immediately after activation.

The Tadiran SL-760P is a primary high-performance lithium-thionyl chloride battery in the widely used size AA (Mignon). This special version comes pre-assembled with robust axial connection wires, allowing flexible and direct installation in electronic assemblies. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional electronic applications requiring long-lasting power supply in a standard format.Highlights at a glanceReady to install: With robust, pre-assembled axial wires for direct mounting.High capacity: 2.2 Ah for a very long and self-sufficient operating life.High nominal voltage: Stable voltage of 3.6 V throughout almost the entire service life.Maximum reliability: Extremely low self-discharge rate of under 1% per year.Outstanding longevity: Designed for an operating and storage life of over 10 years.Extreme temperature range: Fully functional in a temperature range from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-760P is the perfect choice for long-life installations where battery replacement is undesirable. The axial wires allow flexible and direct integration into the circuit without the need for a battery holder. It is ideal for professional original equipment in metering (water, gas, electricity), for memory backups (RTC, CMOS) as well as in alarm systems, security systems and industrial sensors.Engineered for maximum safety and efficiencyThe safety and longevity of the SL-760P are based on its considered construction. The cell is fitted with a hermetic glass-to-metal seal which reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high level of intrinsic safety. Each cell is designed to supply its energy constantly and safely over a very long period, minimising maintenance costs and reducing the overall operating costs of your application.Superior lithium-thionyl chloride technologyLithium-thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. One characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, dramatically reducing self-discharge and thus enabling extremely long shelf life. This technology ensures that the energy remains almost fully available even after years of storage, which sets the SL-760P apart from all other battery technologies. Characteristics  ModelTadiran SL-760/P TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial wires (P) RechargeableNo  FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may result in overheating, leakage, or bursting of the cell.What does "axial wire" connection mean?This model is fitted with connection wires that exit centrally from the positive and negative pole of the cell, running in opposite directions along the longitudinal axis. This configuration allows very flexible mounting and direct connection to the electronics via soldering, without requiring a battery holder.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface that minimises self-discharge. On initial load, this layer may result in a brief voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.Which devices is this battery type suitable for?This battery type is solely designed for professional and industrial electronics. These include, among others, meters, memory backup, security technology, medical devices and sophisticated tracking systems where the battery is soldered directly in place.How long is the battery shelf life and how should it be stored?The battery offers a shelf life of over 10 years. For maximum shelf life, we recommend storage in a cool, dry place with low humidity.

The Tadiran SL-761S is a primary high-performance lithium thionyl chloride battery in the compact special size 2/3 AA. It was designed for maximum reliability and an extremely long operating life in space-critical applications. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal power solution for professional electronic assemblies where miniaturisation and longevity are important. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceCompact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for long and self-sufficient operating periods.High nominal voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding longevity: Designed for more than 10 years of operating and storage life.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, the Tadiran SL-761S is ideal for space-critical applications where a standard AA cell would be too large. It is the preferred choice for professional original equipment in compact sensors, for memory backup (RTC, CMOS) on densely populated boards, in smaller alarm systems and in medical technology. Its reliability also makes it indispensable for miniaturised GPS tracking modules and other mobile monitoring devices.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761S are based on its well thought-out construction. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy is almost completely available even after years of storage, which distinguishes the SL-761S from all other battery technologies. Characteristics  ModelTadiran SL-761/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Tadiran SL-761S batteryIs this battery rechargeable?No, the Tadiran SL-761S is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface that minimises self-discharge. With the first load, this layer can lead to a short voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.How long does the battery last and how should it be stored?The battery has a shelf life of more than 10 years. For maximum durability, we recommend storing it in a cool and dry place with low humidity.Which devices is this battery type suitable for?This battery type is intended exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology and miniaturised tracking systems.Does this model have solder connections?No, this SL-761S model is the standard version and is supplied without solder connections. It is intended for use in suitable battery holders. For direct installation on PCBs, Tadiran offers variants of this cell type with different solder connections.What makes this battery safer than other battery types?Safety is ensured by several factors: The hermetic glass-to-metal seal prevents leakage, the inorganic electrolyte is non-flammable and the cell is not under pressure at room temperature. This ensures a high level of operational safety.

.The Tadiran SL-761/T is a 3.6 V lithium thionyl chloride battery (size 1/6 AA, 0.85 Ah) with axial solder wires (T). It is used for reliable long-term operation in industrial devices and storage systems that require high energy density..

The Tadiran SL-761PR is a primary high-performance lithium thionyl chloride battery in the compact size 2/3 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimal self-discharge. This version is pre-assembled with radial pins for direct and secure mounting on circuit boards. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a GlanceMaximum longevity: Extremely low self-discharge of under 1% per year.For PCB mounting: Pre-assembled with radial pins for direct installation.Reliable capacity: 1.5 Ah in compact 2/3 AA size.High nominal voltage: Stable voltage of 3.6 V for almost the entire lifetime.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a Range of ApplicationsThe Tadiran SL-761PR was specifically developed for long-term applications with low continuous current, where the battery is firmly integrated into the electronics. The radial pins allow specific and space-saving placement on the board. Its main areas of use include memory backups (RTC, CMOS) in industrial control units (PLC), meter technology (metering for water, gas, electricity) as well as long-lasting security technology and alarm systems.Engineered for Maximum Safety and EfficiencyThe safety and longevity of the SL-761PR are based on Tadiran’s proven design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high intrinsic safety. Each cell is designed to supply its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior Lithium Thionyl Chloride TechnologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A distinctive feature is the passivation effect: a thin protective layer forms on the lithium anode, which minimises self-discharge to an absolute minimum and enables extremely long storage and operating times. This ensures that the energy is reliably available even after many years.Features  ModelTadiran SL-761/PR TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1500 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit from the centre of the terminals, radial pins are arranged so that they exit from one end face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and allows particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little current over many years, such as memory backup in computers. In contrast, other series (like the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This type of battery is ideal for professional electronics where the battery is permanently soldered and an extremely long service life is essential. Typical applications are meters, industrial computers, alarm systems and long-lasting sensors with specific board layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can cause overheating, leakages or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. Upon first load, it can cause a brief voltage delay. This should be considered in circuit design for applications that require current immediately after activation.

The Tadiran SL-761PT is a primary high-performance lithium-thionyl chloride battery in the compact size 2/3 AA. As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long operating life with minimum self-discharge. This version is pre-assembled with axial connection wires for flexible and secure solder mounting. With a rated voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal energy solution for professional "Fit and Forget" applications.Highlights at a glanceReady to install: With robust, pre-assembled axial wires for direct mounting.Maximum longevity: Extremely low self-discharge of less than 1 % per year.Reliable capacity: 1.5 Ah in a compact 2/3 AA size.High rated voltage: Stable voltage level of 3.6 V over almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-761PT has been specifically developed for long-term applications with low continuous current, where the battery is permanently integrated into the electronics. The axial wires allow flexible and direct integration into the circuit. Its primary areas of application include memory backups (RTC, CMOS) in industrial controllers (PLC), metering technology (metering for water, gas, electricity) as well as long-life security technology and alarm systems. It is the perfect choice for all devices that need to operate autonomously for a decade or more without a battery change.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761PT are based on the proven Tadiran construction. The cell features a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period, which minimises maintenance costs and reduces the total operating costs of your application.Superior lithium-thionyl chloride technologyThe lithium-thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating life. This ensures that the energy is still reliably available even after many years. Characteristics  ModelTadiran SL-761/PT TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 AA Rated voltage (V)3.6 Capacity (mAh)1500 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial wires (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the "axial wires" connection mean?This model is equipped with connection wires that exit the centre of the positive and negative poles of the cell and run in opposite directions along the longitudinal axis. This configuration enables very flexible mounting and direct, fixed connection to the electronics by soldering, without requiring a battery holder.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current requirements.For which devices is this battery type suitable?This type of battery is ideal for professional electronics where the battery is permanently soldered and an extremely long service life is crucial. Typical applications are meters, industrial computers, alarm systems and long-life sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to recharge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean with this battery?After extended storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first load, it can lead to a short voltage delay. This should be considered in circuit design for applications that require immediate current after activation.

The Tadiran lithium battery of size 2/3 AA is a primary high-performance cell designed for maximum reliability and an extremely long operating life. This special version is preassembled with robust axial connection wires (CNA), which enables flexible and direct installation in electronic assemblies. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal energy solution for professional, space-critical applications where longevity is crucial.Highlights at a glanceReady to install: With robust, preassembled axial wires for direct mounting.Compact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for a long and self-sufficient operating time.High nominal voltage: Stable voltage of 3.6 V for almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Extreme temperature range: Fully operational in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, this Tadiran cell is ideal for space-critical applications where a standard AA cell would be too large. The axial wires enable flexible and direct integration into the circuit without the need for a battery holder. It is the preferred choice for professional initial equipment for compact sensors, memory backups (RTC, CMOS) on densely populated boards, smaller alarm systems and in medical technology.Engineered for maximum safety and efficiencyThe safety and longevity of this cell are based on its thoughtful construction. It features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy reliably and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.Superior lithium-thionyl chloride technologyLithium-thionyl chloride technology (Li-SOCl₂) offers decisive advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy remains almost completely available even after years of storage, which sets this cell apart from all other battery technologies. Features  ModelTadiran SL-761 (axial wires) TechnologyLithium-thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1500 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionAxial wires RechargeableNo  FAQs about this Tadiran batteryIs this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the "axial wires" connection mean?This model is equipped with connection wires that emerge centrally from the positive and negative terminals of the cell and run in opposite directions along the longitudinal axis. This configuration enables very flexible assembly and direct connection to the electronics by soldering, without the need for a battery holder.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface, which minimises self-discharge. This layer can cause a brief voltage delay during initial load. For applications that require immediate high current pulses, appropriate circuit designs or special battery types should be considered.Which devices is this battery type suitable for?This battery type is designed exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology, and miniaturised tracking systems.How long is the battery shelf life and how should it be stored?The battery has a shelf life of over 10 years. For maximum durability, we recommend storage in a cool and dry place with low humidity.

The Tadiran SL-850S is a primary lithium thionyl chloride battery in an extremely compact size 1/2 AA. It was designed for professional electronic applications that require high energy density and reliable long-term performance in the smallest of spaces. With a nominal voltage of 3.6 V and a high capacity of 1.2 Ah, it is a proven energy solution for long-lasting, miniaturised devices. This model is the standard version for use in battery holders.Highlights at a glanceCompact design: High energy density in the miniaturised 1/2 AA size.High capacity: 1.2 Ah for a long and reliable operating time.High rated voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-850S was developed specifically for applications where miniaturisation and a long, maintenance-free service life are crucial. Its primary areas of use include memory backups (RTC, CMOS), security technology, industrial sensors, small medical devices and other professional electronics that rely on a long-lasting power source in a small design.Designed for maximum safety and efficiencyThe safety and longevity of the SL-850S are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, which minimises maintenance costs and reduces the total cost of ownership of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating life. This ensures that the energy is still reliably available even after many years. Battery features  ModelTadiran SL-850/S TechnologyLithium thionyl chloride (high current) Size1/2 AA Nominal voltage (V)3.6 Capacity (mAh)1200 Max. continuous discharge current500 mA Max. pulse current1000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 25.2 Weight (g)approx. 9 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryDoes this model have solder terminals or wires?No, the model SL-850S is the standard version with normal battery contacts and is intended for use in a suitable 1/2 AA battery holder. For direct installation, Tadiran also offers variants of this cell type with different solder connections.For which applications is this battery type suitable?This type of battery is ideal for miniaturised electronics that require an extremely long service life. Typical applications include compact wireless sensors, small medical devices, safety technology and memory retention in industrial control systems.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. At the first load, especially with higher currents, it can lead to a short voltage delay. This should be taken into account in the circuit design of the application.What is the shelf life of the battery and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storing in a cool and dry place with low humidity.

The Tadiran SL-860P is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). It was designed for professional applications that require a very high capacity and a long service life. This version is pre-fitted with axial pins for flexible and safe solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is a reliable energy solution for long-life electronic devices.Highlights at a glanceVery high capacity: 2.4 Ah for a maximally extended and self-sufficient operating time.Ready to install: With robust, axial pins for direct and safe soldering.High nominal voltage: Stable voltage level of 3.6 V for almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-860P has been specially developed for long-term applications where the battery is firmly and vibration-proof integrated into electronics. The axial pins allow a fixed integration without a battery holder. Its primary fields of application include memory backups (RTC, CMOS) in industrial controllers (PLC), metering technology (metering for water, gas, electricity), professional security technology and long-life radio sensors.Designed for maximum safety and efficiencyThe safety and service life of the SL-860P are based on the proven Tadiran design. The cell features a hermetic glass-to-metal seal that reliably prevents electrolyte leakage. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum, thus enabling extremely long storage and operating capability. This ensures that the energy is still reliably available even after many years. Characteristics  ModelTadiran SL-860/P TechnologyLithium thionyl chloride (high current) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 20 ConnectionAxial pins (P) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connecting wires (pins) that exit centrally from the positive and negative poles of the cell. This configuration is designed for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent solder connection.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is soldered in place and extremely long service life is crucial. Typical applications include meters, industrial computers, alarm systems and long-life sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not under any circumstances be recharged. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first use, especially with higher currents, it can cause a short voltage delay. This should be considered in the circuit design of the application.What is the shelf life of the battery and how should it be stored?The battery has a shelf life of over 10 years. For maximum shelf life, we recommend storing in a cool, dry place with low humidity.

The Tadiran SL-2770S is a revolutionary PulsesPlus hybrid battery in the standard size C (Baby). It was specially developed for modern electronic applications that require both a long service life and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). This version offers a high energy reserve for long-term applications, with 7.2 Ah.Highlights at a glanceHigh pulse current capability: Ideal for applications with high peak current requirements (up to 1.5 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Very high capacity: 7.2 Ah from the primary cell for extremely long, self-sufficient runtimes.Maximum service life: The primary cell is only minimally stressed, which maximises longevity.Robust C (Baby) design: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2770S is the optimal energy solution for demanding applications that spend most of their time in standby mode but periodically require high performance for transmissions. Its primary areas of use include modern radio modules (GSM, LTE, IoT), professional asset tracking systems, emergency call systems (eCall), security and surveillance technology, as well as military communication equipment. Wherever a standard lithium battery would collapse under pulse load, PulsesPlus technology provides reliable performance.PulsesPlus technology: Maximum energy and performanceThe core of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell serves as a long-term energy store and constantly charges the parallel-connected hybrid layer capacitor (HLC). If the application requires a high current pulse, this is supplied directly by the HLC and not by the primary cell. This intelligent system protects the primary cell from heavy loads, prevents the typical voltage drop caused by passivation, and thus ensures stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unequalled advantages. It combines the high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source which remains operational for over 10 years and can deliver high power instantly when required, even after long idle times and at low temperatures. Features  ModelTadiran SL-2770/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)8500 Max. continuous discharge current300 mA Max. pulse current600 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 50 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-life lithium primary battery with a rechargeable hybrid layer capacitor (HLC). The battery provides the energy for extremely long life, while the capacitor delivers the high performance for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power, but periodically require short, high current pulses. A typical example is an asset tracker that sends its position via mobile once a day. A standard battery would experience a voltage drop during such a transmission pulse, but the PulsesPlus battery would not.Does PulsesPlus completely prevent the passivation effect?Yes, from an application perspective, the passivation effect is completely eliminated. As the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never faces the high load. Thus, the voltage drop that occurs in standard cells due to the passivation layer is effectively avoided.Does this model have solder terminals or wires?No, the model SL-2770S is the standard version with normal battery contacts and is intended for use in a suitable C battery holder. For direct installation, Tadiran also offers versions of this cell type with various connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged by an external source. The integrated capacitor is recharged exclusively by the primary cell itself.

The Tadiran SL-2780S is a revolutionary PulsesPlus hybrid battery in the standard size D (Mono). It was developed for demanding long-term applications that require both a very high energy reserve and the ability to deliver high current pulses. The system combines a long-lasting lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With a very high capacity of 16.5 Ah, it is the first choice for devices that need to function completely autonomously for many years.Highlights at a glanceVery high capacity: 16.5 Ah for extremely long, autonomous runtimes.High pulse current capability: Ideal for applications with high peak current demand (up to 3 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust D (Mono) design: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2780S is the optimal energy solution for applications that need to operate for years to decades without maintenance and periodically require high performance for transmission operations. Its primary fields of application include long-term asset tracking systems, autonomous measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements, as well as demanding military applications.PulsesPlus technology: Maximum energy and performanceThe core of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 16.5 Ah serves as a long-term energy store and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is supplied directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop caused by passivation, and thus ensures stable voltage and maximum service life.Superior lithium-hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unrivalled advantages. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is an energy source that remains operational for decades and can immediately deliver high performance when required, even after long periods of inactivity and at low temperatures.Features  ModelTadiran SL-2780/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeD (Mono) Nominal voltage (V)3.6 Capacity (mAh)16500 Max. continuous discharge current500 mA Max. pulse current3000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 60.0 Weight (g)approx. 95 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-lasting lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for an extremely long service life, while the capacitor delivers the high performance for current pulses.For which applications is a PulsesPlus battery superior to a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require brief, high current pulses. A typical example is an asset tracker that transmits its position once a day via mobile communications. A standard battery would experience a voltage drop during this transmission pulse, but the PulsesPlus battery would not.Does PulsesPlus completely prevent the passivation effect?Yes, from the application's point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never experiences the high load. This effectively prevents the voltage drop that occurs in standard cells due to the passivation layer.Does this model have solder terminals or wires?No, the SL-2780S model is the standard version with normal battery contacts and is intended for use in a suitable D battery holder. For direct installation, Tadiran also offers variants of this cell type with different connections.Is this system rechargeable?No, this is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.

The Tadiran SL-2780P is a revolutionary PulsesPlus hybrid battery in the standard size D (mono). It was developed for demanding long-term applications that require both a very high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium-thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). This version is pre-assembled with axial wire (pins) for a fixed and vibration-proof installation.Highlights at a glanceHigh pulse current capability: Ideal for applications with high peak current requirements (up to 3 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Very high capacity: 16.5 Ah from the primary cell for extremely long, self-sufficient runtimes.Ready to install: With robust, axial wire for direct and safe solder mounting.Maximum service life: Low self-discharge of the primary cell and gentle operation.Powerful in a wide range of applicationsThe Tadiran SL-2780P is the optimum energy solution for applications that must operate for years or even decades without maintenance and periodically require high power for transmission processes. Its primary areas of use include long-term asset tracking systems, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements and demanding military applications in which the energy source is permanently soldered.PulsesPlus technology: Maximum energy and performanceThe core of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 16.5 Ah serves as long-term energy storage and continuously charges the parallel-connected hybrid layer capacitor (HLC). If the application requires a high current pulse, this is supplied directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and thus ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unrivalled advantages. It combines the extremely high energy density and low self-discharge of a lithium-thionyl chloride cell with the high power density of a capacitor. The result is an energy source that remains operational for decades and can deliver high power immediately when required, even after long periods of inactivity and at low temperatures. Characteristics ModelTadiran SL-2780/P TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeD (mono) Rated voltage (V)3.6 Capacity (mAh)16500 Max. continuous discharge current500 mA Max. pulse current3000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 60.0 Weight (g)approx. 95 ConnectionAxial wire (P) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-life lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for an extremely long service life, while the capacitor provides the high power for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high power surges. A typical example is an asset tracker that sends its position once a day via mobile radio. The voltage of a standard battery would collapse with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application's point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never experiences the high load. This effectively avoids the voltage dip that occurs in standard cells due to the passivation layer.What does the "axial wire" connection mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative terminals of the cell. This configuration is intended for through-hole mounting (Through-Hole) on printed circuit boards (PCBs) and enables a very robust and durable soldered connection.Is this system rechargeable?No, this is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is charged only by the primary cell itself.

The Tadiran SL-2790S is a revolutionary PulsesPlus hybrid battery in the large case size DD. It was developed for the most demanding long-term applications that require both extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With an enormous capacity of 32 Ah, it is the first choice for devices that have to operate completely autonomously for many years.Highlights at a glanceExtremely high capacity: 32 Ah for maximum autonomous operating times over many years.High pulse current capability: Ideal for applications with high peak current requirements (up to 4 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust DD form factor: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2790S is the optimal energy solution for applications that must work for years to decades without maintenance and still need periodic high power for transmission processes. Its main application areas include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements as well as demanding military applications.The PulsesPlus technology: Maximum energy and performanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as long-term energy storage and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is delivered directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and so ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unmatched benefits. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use over decades and can provide high power immediately when required, even after long periods of inactivity and at low temperatures. Features  ModelTadiran SL-2790/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) Case sizeDD Rated voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is the PulsesPlus technology?PulsesPlus is a hybrid system that combines a durable lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for a very long service life, while the capacitor provides the high output for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high current bursts. A typical example is a self-sufficient measuring buoy that transmits its data to a satellite once a day. A standard battery would experience a voltage drop with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application’s point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never encounters the high load. As a result, the voltage drop caused by the passivation layer in standard cells is effectively avoided.Does this model have solder or wire connections?No, the model SL-2790S is the standard version with regular battery contacts and is intended for use in a suitable DD battery holder. For direct installation, Tadiran also offers versions of this cell type with different connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.

The Tadiran SL-2790T is a revolutionary PulsesPlus hybrid battery in the very large size DD. It was developed for the most demanding long-term applications that require both an extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). This version is equipped with solder tags (LF-U) pre-assembled for direct mounting on circuit boards and offers the maximum available capacity of this series at 32 Ah.Highlights at a GlanceExtremely high capacity: 32 Ah for maximum independent runtimes over many years.High pulse current capability: Ideal for applications with high peak current demand (up to 4 A).No voltage dip: The integrated HLC prevents the passivation effect under load.For PCB mounting: Pre-assembled with solder tags for direct and secure installation.Maximum service life: Low self-discharge of the primary cell and gentle operation.Powerful in a Wide Variety of ApplicationsThe Tadiran SL-2790T is the optimum energy solution for applications that have to operate for years or even decades without maintenance and require periodically high performance for transmission processes. Its main areas of use include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy needs and demanding military applications in which the energy source is integrated directly on a mainboard.The PulsesPlus Technology: Maximum Energy and PerformanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as a long-term energy store and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is supplied directly from the HLC, not from the primary cell. This clever system protects the primary cell from high loads, prevents the typical voltage drop caused by passivation, and thus ensures stable voltage and maximum service life.Superior Lithium Hybrid TechnologyBy combining the best properties of two technologies, the PulsesPlus battery offers unrivalled advantages. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use for decades and can provide high power immediately as needed, even after long periods of inactivity and at low temperatures. Features  ModelTadiran SL-2790/T TechnologyPulsesPlus (Li-SOCl₂ + HLC) SizeDD Nominal voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 Connectionsolder tab (T) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is PulsesPlus technology?PulsesPlus is a hybrid system that combines a long-life lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for an extremely long service life, while the capacitor provides the high power for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually require very little power, but periodically require short, high current surges. A typical example is a self-sufficient measuring buoy that transmits its data by satellite once a day. A standard battery would experience a voltage dip with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely eliminate the passivation effect?Yes, from the application's point of view, the passivation effect is completely eliminated. Since the high current pulse is provided by the HLC and not by the primary cell, the primary cell never sees the high load. This effectively avoids the voltage dip that occurs with standard cells due to the passivation layer.What does connection with solder tags mean?This model is equipped with metal contacts, so-called solder tags, which can be soldered directly onto a printed circuit board (PCB) for a simple and permanently secure connection. This ensures an excellent mechanical and electrical connection.Is this system rechargeable?No, this is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.

The Tadiran SL-2870P is a special lithium thionyl chloride battery in the C (Baby) size, designed for reliable long-term operation in an extended temperature range of up to +125 °C. It combines a very high capacity of 8.5 Ah with the ability to withstand demanding thermal conditions. This version is pre-assembled with an axial lead (pins) for secure and vibration-resistant installation and is ideal for professional industrial and automotive applications.Highlights at a glanceExtended temperature range: Reliable operation from -55 °C to +125 °C.High capacity: 8.5 Ah for very long runtimes in demanding environments.Ready to install: With robust, axial leads for direct and secure solder mounting.High rated voltage: Stable voltage level of 3.6 V even at high temperatures.Maximum longevity: Very low self-discharge and proven long-term stability.Powerful in a wide range of applicationsThe Tadiran SL-2870P was specifically developed for applications whose operating temperature exceeds the limit of standard lithium batteries (+85 °C). Its main applications include automotive electronics (e.g. toll systems, tracking), industrial sensors in demanding production environments, outdoor devices with strong sun exposure and professional security equipment that must function reliably in all climate zones.Designed for increased thermal loadThe exceptional thermal durability of the SL-2870P is based on its special construction and optimised electrolyte chemistry. The hermetic glass-to-metal seal is designed to maintain its tightness even at elevated temperatures and repeated temperature cycles. This ensures the highest possible level of safety and reliability over the entire, long service life of the cell.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications. A characteristic feature is the passivation effect: A thin protection layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long shelf and operating life. This version retains its performance and reliability even under thermal conditions that would be critical for standard cells. Features  ModelTadiran SL-2870/P TechnologyLithium thionyl chloride (high current) SizeC (Baby) Nominal voltage (V)3.6 Capacity (mAh)8500 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 26.2 x 50.0 Weight (g)approx. 50 ConnectionAxial lead (P) RechargeableNo  FAQs about this Tadiran batteryWhat is the difference between this (+125°C) and a standard (+85°C) Tadiran cell?The key difference is the extended upper operating temperature range of +125 °C compared to +85 °C for standard cells. This is achieved through a special, more heat-resistant internal design and an adjusted chemistry, which guarantees reliable long-term operation in high-heat environments.Do I need this cell or the high temperature series (+130°C)?This cell (up to +125°C) is the ideal and economical choice for most demanding industrial and automotive applications. The high-temperature series (SL-500, up to +130°C) is designed for even more extreme niche applications such as deep drilling in the oil and gas industry ("downhole drilling").What does the "axial lead" connection mean?"Axial lead" is a technical term for connection wires (pins) that exit centrally from the positive and negative terminals of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and enables a very robust and permanent solder connection.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and may lead to overheating, leaks, or rupture of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first load, it can lead to a short voltage delay. This should be taken into account in the circuit design for applications that require power immediately after activation.

The Tadiran SL-886P is a primary high-performance lithium thionyl chloride battery in the special size 1/6 D. It is characterised by an exceptionally high energy density and offers a very high capacity of 1.7 Ah in an extremely compact housing. This version is equipped with robust pins for direct and secure mounting on circuit boards. With its nominal voltage of 3.6 V, it is the ideal energy solution for professional and long-lasting electronics with special space requirements.Highlights at a glanceVery high energy density: 1.7 Ah capacity in special 1/6 D compact form factor.For PCB mounting: Pre-assembled with pins for a robust and durable soldered connection.High rated voltage: Stable voltage of 3.6 V for almost the entire service life.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-886P was specifically developed for demanding applications that require a high and long-lasting energy reserve in the smallest of spaces. Its main areas of use include professional medical technology, military communication and monitoring systems, industrial sensors, and other specialised electronic devices where standard sizes cannot be used.Designed for maximum safety and efficiencyThe safety and longevity of the SL-886P are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, which minimises maintenance costs and lowers the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) is the gold standard for long-term applications with low power requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces self-discharge to an absolute minimum and thus enables extremely long storage and operating capability. This ensures that the energy remains reliably available even after many years. Features  ModelTadiran SL-886/P TechnologyLithium thionyl chloride (high current) Size1/6 D Nominal voltage (V)3.6 Capacity (mAh)1700 Max. continuous discharge current1000 mA Max. pulse current2000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x H, mm)approx. 33.1 x 10.5 Weight (g)approx. 22 ConnectionPins / printed contacts (P) RechargeableNo  FAQs about this Tadiran batteryWhat is special about the 1/6 D size?The 1/6 D size is a specialised industrial form factor and not a common consumer standard. It was developed to provide high capacity in devices with special, compact space requirements where standard sizes such as AA do not fit.What does connection with pins mean?This model is equipped with connection pins that enable an extremely robust and mechanically stable connection when soldered directly onto a printed circuit board (PCB). This is especially important for devices that are exposed to shocks or vibrations.For which applications is this battery type suitable?This type of battery is ideal for specialised professional electronic devices in which the battery is permanently soldered in and a very long service life in a compact housing is essential. Typical applications can be found in medical technology, military equipment, and industrial sensor technology.Is this battery rechargeable?No, this is a primary lithium battery and under no circumstances should it be charged. Attempting to charge the cell is dangerous and can lead to overheating, leakage, or bursting of the cell.What does the passivation effect mean for this battery?After prolonged storage, a protective layer forms on the lithium surface. This layer is responsible for the extremely low self-discharge. During the first load, especially with higher currents, it may cause a short voltage delay. This should be taken into account in the circuit design of the application.

The Tadiran SL-889P from the TLM series is a primary high-performance lithium battery developed for applications with extremely high current and pulse requirements. In contrast to conventional lithium thionyl chloride cells, which are optimised for energy density, this cell is designed for maximum power density. With the ability to deliver pulses up to 5 A, it is the ideal energy solution for the most demanding military, medical and industrial applications. This version is pre-assembled with robust pins for direct and secure mounting on PCBs.Highlights at a glanceExtreme pulse capability: Reliably delivers high current pulses of up to 5 A.High continuous current: Suitable for demanding continuous loads of up to 2 A.Fast voltage response: Low voltage drop and stable voltage even under high load.Compact energy source: 1.0 Ah capacity in a robust, special shape (Ø21mm).For PCB mounting: Pre-assembled with pins for an extremely resilient solder connection.Powerful in a wide range of applicationsThe Tadiran SL-889P was specifically developed for applications where high performance must be accessed in fractions of a second. Its primary areas of use include military communication technology (radios), medical devices such as defibrillators, emergency systems, pyrotechnic igniters, and professional cordless power tools. It is the first choice when conventional primary cells cannot deliver the required performance.TLM series: The technology for maximum performanceTLM (Tadiran Lithium Metal Oxide) technology is based on a unique lithium metal oxide chemistry optimized for high power output. In contrast to Li-SOCl₂ cells designed for longevity, TLM technology enables the construction of cells with very low internal resistance. This leads to a rapid voltage response without the delay caused by passivation and enables the delivery of extremely high currents from a compact and lightweight housing, which is also hermetically sealed and very safe.Engineered for maximum robustnessEach cell of the TLM series is designed for use in harsh conditions. The hermetically sealed glass-to-metal seal and stainless steel housing ensure high resistance to shocks, vibrations, and demanding environments. The pre-assembled solder pins allow an especially strong and durable connection to the PCB, which further enhances the reliability of the overall system. Features  ModelTadiran SL-889/P TechnologyLithium (Li-SOCl₂ / Li-MnO₂) SizeSpecific shape Nominal voltage (V)3.0 Capacity (mAh)1000 Max. continuous discharge current500 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (mm)Manufacturer-specific Weight (g)approx. 10 ConnectionPins / solder contacts (P) RechargeableNo  FAQs about this Tadiran high-performance batteryWhat is the main difference between the TLM (SL-800) and the Li-SOCl₂ (e.g. SL-700) series?The main difference lies in the design goal. The TLM series is optimised like a sprinter for maximum performance (high currents). The Li-SOCl₂ series are optimised like marathon runners for maximum energy (long service life at low current). They therefore cater to completely different application requirements.For which applications is a TLM battery the right choice?A TLM battery is ideal for devices that require very high power for a short period. Examples include rapid charging of capacitors in a defibrillator, transmission process of a military radio, or initiating a pyrotechnic igniter.What is the advantage of pin connection?Pins offer an extremely robust and mechanically stable connection when soldered directly to a printed circuit board (PCB). This is particularly important for devices exposed to strong vibrations, shocks, or accelerations, as found in military or industrial environments.Why is the nominal voltage specified as 3.0 V?While the open circuit voltage is higher, the nominal voltage of 3.0 V is a realistic value that reflects the stable cell voltage under typical high load. For a high-performance cell, the voltage under load is a crucial quality characteristic.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge a high-performance cell is extremely dangerous.