Tadiran SL-360PR Lithium battery AA with 3.6 V and 2.4 Ah, with radial pins

The Tadiran SL-360PT from the iXtra series is a primary lithium thionyl chloride battery in the widely used size AA (Mignon). It was specially developed for applications requiring a long service life in combination with a moderate current load capacity. This version comes pre-assembled with axial pins for flexible and secure solder mounting. With a nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics with regular power consumption.Highlights at a glanceReady to install: With robust, axial pins for direct solder mounting.Optimised for moderate loads: High capacity and stable voltage even with medium current demand.Very high capacity: 2.4 Ah for maximised and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V during almost the entire service life.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360PT was specifically developed for applications in which longevity and improved power delivery are crucial. The axial pins enable fixed and vibration-proof integration without a battery holder. Main areas of use include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers and industrial counters and measuring instruments (metering) that transmit data regularly.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360PT are based on Tadiran's proven design. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, which minimises maintenance costs and reduces total operating costs for your application.iXtra series: The technology for higher performanceTadiran's iXtra series is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series shows better performance with moderate load demands and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply in applications which regularly "wake up" to perform tasks. Features  ModelTadiran SL-360/PT TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionAxial pins (PT) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "axial pins" mean?This model is equipped with connection wires (pins) that emerge centrally from the positive and negative ends of the cell. This configuration is intended for through-hole mounting on printed circuit boards (PCBs) and allows a very robust and long-lasting solder connection.What is the difference between the SL-300 (iXtra) and SL-700 series?The SL-300 (iXtra) series, to which this cell belongs, is optimised for applications with moderate current requirements (e.g. wireless sensors). It offers a more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory backup applications.For which applications is this battery type suitable?This battery type is ideally suited for professional electronics where the battery is permanently soldered and a long service life with regular power demand is crucial. Examples include wireless alarm systems, GPS trackers and industrial wireless sensors.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface, minimising self-discharge. The iXtra series is designed so that this layer breaks down more quickly and with less voltage drop under load than in the SL-700 series, which is advantageous for applications with regular current pulses.

The Saft LS14500 2PF is a high-performance lithium thionyl chloride battery (Li-SOCl2) in AA size, which is equipped at the factory with two axial solder pins. This assembly enables safe and permanent mounting directly on printed circuit boards. It offers a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, making it the ideal choice for long-lasting industrial applications that require a permanently mounted power source.Highlights at a glanceReady to install: Two axial solder pins (2PF) for direct and secure PCB mountingHigh capacity: 2.6 Ah in the standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely Long-lasting: Very low self-discharge of less than 1% per yearRobust: Hermetically sealed stainless steel housing for maximum safety in operationVersatile: Usable in a wide temperature range from -60°C to +85°CPowerful for industrial electronicsThe Saft LS14500 2PF was specially developed for use in professional electronics, where a vibration-resistant and permanent power supply is crucial. Thanks to the integrated solder pins, it is ideal for permanent installation in memory backup systems, alarm systems, industrial control units (PLCs), counters, and safety-critical sensors that must function reliably for many years.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output throughout the entire service life. The cell is hermetically sealed with a glass-to-metal seal to minimise the risk of current leakage. It also contains a non-flammable electrolyte, which significantly increases operational safety. The LS14500 2PF complies with the IEC 60086-4 safety standard and is UL certified.Robust Li-SOCl2 technology for professionalsThe lithium thionyl chloride chemistry delivers superior energy density and an exceptionally long service life. Compared to other battery technologies, it provides a stable voltage level up to the end of the discharge cycle. The robust construction reliably protects the cell from corrosion and mechanical stress, ensuring the functionality of your application throughout the product's service life. Features  ModelSaft LS14500 2PF TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection2 radial pins (2PF) RechargeableNo  FAQs about the Saft LS14500 2PF lithium round cellWhat does the designation 2PF mean?The marking 2PF describes the assembly of the battery. It means that the cell is provided with two axial solder pins (pins). These enable easy and safe through-hole mounting (Through Hole Technology) directly onto a printed circuit board.Is the Saft LS14500 2PF rechargeable?No, the LS14500 2PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to recharge is dangerous, damages the cell, and can result in leakage or venting.What is the difference to the standard LS14500 without pins?The electrical characteristics and the battery cell itself are identical. The only difference lies in the configuration. The 2PF version is intended for direct soldering onto a PCB, whereas the standard version is designed for use in battery holders.Can this battery be used in normal devices for AA batteries?No, this battery is intended solely for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than double that of a conventional 1.5 V AA battery. Furthermore, the solder pins prevent use in standard battery holders.How is the battery mounted correctly on a PCB?The battery is inserted through the designated holes on the PCB and then soldered. It is essential to ensure the correct polarity, which is marked on the battery, to avoid damaging the electronics.

The Tadiran SL-760PR is a primary high-performance lithium thionyl chloride battery in the widely used size AA (Mignon). As part of the proven SL-700 series, it is optimised for maximum reliability and an extremely long service life with minimum self-discharge. This version is pre-configured with radial pins (+/- 1 pin) for the direct and secure mounting on PCBs. With a nominal voltage of 3.6 V and a high capacity of 2.2 Ah, it is the ideal energy solution for professional "fit and forget" applications.Highlights at a glanceMaximum longevity: Extremely low self-discharge of less than 1% per year.For PCB mounting: Pre-configured with radial pins (+/- 1 pin) for direct installation.High capacity: 2.2 Ah in standardised AA (Mignon) format.High rated voltage: Stable voltage of 3.6 V throughout almost the entire service life.Wide temperature range: Reliable operation from -55°C to +85°C.Powerful in a wide range of applicationsThe Tadiran SL-760PR was specifically developed for long-term applications with low continuous current, in which the battery is permanently integrated into the electronics. The radial pins enable a specific and space-saving arrangement on the PCB. Its primary areas of application include memory backups (RTC, CMOS) in industrial control systems (PLC), metering technology (metering for water, gas, electricity) as well as long-life security technology and alarm systems in the common AA format.Designed for maximum safety and efficiencyThe safety and longevity of the SL-760PR are based on the proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high degree of intrinsic safety. Each cell is designed to deliver its energy constantly and safely over a very long period of time, reducing maintenance costs and the total operating costs of your application.Superior lithium thionyl chloride technologyThe lithium thionyl chloride technology (Li-SOCl₂) of the SL-700 series is the gold standard for long-term applications with low current requirements. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which reduces the self-discharge to an absolute minimum, enabling extremely long storage and operational capability. This ensures that energy is reliably available even after many years. Features  ModelTadiran SL-760/PR TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2200 Max. continuous discharge current100 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionRadial pins (PR) RechargeableNo  FAQs about this Tadiran batteryWhat does the connection with "radial pins" mean?In contrast to axial connections, which exit from the centre of the terminals, radial pins are arranged so that they exit from one face of the battery. This configuration is optimised for specific layouts on printed circuit boards (PCBs) and enables particularly stable and defined mounting of the cell.What is the advantage of the SL-700 series over other series?The SL-700 series is optimised for the absolute lowest self-discharge. It is the best choice for applications that require very little power over many years, such as memory backup in computers. In contrast, other series (such as the SL-300 iXtra) are designed for applications with higher pulse current demand.For which devices is this battery type suitable?This battery type is ideal for professional electronics in which the battery is permanently soldered and an extremely long service life is decisive. Typical applications are meters, industrial computers, alarm systems and long-life sensors with specific PCB layouts.Is this battery rechargeable?No, this is a primary lithium battery and must not be recharged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or rupture of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface. This layer is the reason for the extremely low self-discharge. On first use, it can lead to a short voltage delay. This should be considered in circuit design for applications that require current immediately after activation.

The Saft LS14500 3PF is a highly specialised lithium thionyl chloride battery (Li-SOCl2) in AA size, developed for reverse polarity-proof installation in demanding electronics. It is based on the powerful LS14500 cell and is equipped with three axial solder pins that ensure clear positioning on the circuit board. With a nominal voltage of 3.6 V and a high capacity of 2.6 Ah, it provides an extremely reliable long-term energy solution for safety-critical industrial applications.Highlights at a glanceReverse polarity-proof: Three axial solder pins (3PF) for error-free circuit board assemblyHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely durable: Very low self-discharge of less than 1 % per yearRobust: Hermetically sealed stainless steel housing for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for safety-critical electronicsThe Saft LS14500 3PF was specially developed for use in professional electronics where a long-lasting and absolutely reverse-polarity-proof energy source is required. Thanks to the 3-pin configuration, it is ideally suited for board mounting in memory backup systems, real-time clocks (RTC), industrial control units (PLC), meters, and complex sensors where incorrect installation must be ruled out.Efficiency and guaranteed safetyThe proven lithium thionyl chloride technology guarantees reliable energy output for many years. The cell is hermetically sealed by a glass-to-metal seal to minimise the risk of leakage, and has a non-flammable electrolyte. This significantly increases operational safety. The LS14500 3PF is compliant with the IEC 60086-4 safety standard and UL certified, making it ideally suited for demanding applications.Robust Li-SOCl2 technology for professionalsLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers stable voltage until the end of the discharge cycle. The robust design reliably protects the cell from corrosion and mechanical stresses, thus ensuring the functionality of your application throughout the product's entire service life. Characteristics  ModelSaft LS14500 3PF TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal voltage (V)3.6 Capacity (mAh)2600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 Connection3 radial pins (3PF) RechargeableNo  FAQs about the Saft LS14500 3PF lithium round cellWhat does the designation 3PF mean and what is the purpose of the third pin?The designation 3PF means that the battery is equipped with three axial solder pins. Two pins serve as positive and negative terminals. The third pin serves as a mechanical coding. This ensures that the battery can only be mounted in the correct orientation on the circuit board, providing effective reverse polarity protection.Is the Saft LS14500 3PF rechargeable?No, the LS14500 3PF is a lithium primary battery and must not be recharged under any circumstances. Any attempt to charge it is dangerous, damages the cell and can lead to leakage or deflagration.How does the 3PF differ from the 2PF version?Both versions are based on the same powerful LS14500 cell. The difference is in the number of connections. The 3PF version offers mechanical reverse polarity protection due to the additional third pin, which the 2PF version does not have. The choice depends on the safety requirements and circuit board layout of the application.Can this battery be used in normal devices for AA batteries?No, this battery is intended exclusively for professional electronics with an operating voltage of 3.6 V per cell. The voltage is more than twice as high as that of a conventional 1.5 V AA battery. In addition, the solder pins prevent the use in standard battery holders.For which applications is this version particularly suitable?The 3PF version is ideal for safety-critical applications where incorrect soldering of the battery could cause serious damage to the electronics. It is often used in high-quality industrial controls, medical devices, and long-life security systems.

The VARTA CRAA with U-solder tabs (LF-U) is a high-performance, industrially assembled 3-volt lithium primary battery in AA format. It was developed for professional applications that require an extremely durable and reliable energy source with a connection type optimized for direct PCB mounting. Based on lithium manganese dioxide technology (Li-MnO2), it offers a high capacity of 2Ah, extremely low self-discharge and is the ideal energy source for the initial equipment (OEM) of long-life and low-maintenance electronic devices.Highlights at a glanceIndustrial assembly: Equipped with robust U-solder tabs for easy and secure PCB mounting.Extreme longevity: Up to 10 years storage life due to extremely low self-discharge.High capacity: With 2 Ah, it offers a very high energy reserve for long-lasting autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High 3V voltage: Ideal for modern electronic circuits in AA format.Reliable energy for long-term applicationsThe assembled VARTA CRAA is the preferred energy source for "fit and forget" applications where the battery is permanently soldered to a PCB. Its main areas of use are powering smart meters (smart metering for water, gas, electricity), industrial controllers (PLC), safety sensors, alarm systems, and the buffering of memory modules (SRAM/CMOS backup) in professional electronics.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts in the popular AA format and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum readiness for use even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs an industrially pre-assembled cell, the CRAA with U-solder tabs is optimized for efficient and process-safe machine or manual placement of PCBs. The robust, U-shaped solder tabs ensure a permanently secure and vibration-resistant solder connection. With this cell, VARTA offers developers and manufacturers a reliable and easy-to-integrate platform for the development of durable and low-maintenance products. Characteristics                                                                                                                                                                              Model              VARTA lithium round cell CRAA with U-solder tabs               Battery type              Lithium manganese dioxide (Li-MnO2)               Rated voltage (V)              3.0               Capacity (mAh)              2000               Diameter (mm)              14.75               Height (mm)              50.5               Weight (g)              21.5               Connection              U-solder tabs        FAQs on the VARTA lithium battery CRAA with U-solder tabsWhat does "LF-U" or "U-solder tabs" mean?"LF" stands for "solder tab". The addition "U" describes the shape of the metal strips welded to the poles, which are bent like a "U". This configuration facilitates soldering the battery to a PCB (printed circuit board) and ensures a particularly stable mechanical connection.Is this battery rechargeable?No. This is a lithium primary battery. It must by no means be recharged. Attempting to recharge is extremely dangerous and may lead to fire or explosion.Can I use this battery as a replacement for a standard 1.5V AA battery?No, absolutely not. This CRAA cell has a rated voltage of 3 volts, whereas standard AA batteries (alkaline, lithium, NiMH) have 1.5 volts. It may only be used in devices explicitly designed for the 3-volt lithium CRAA type, as the higher voltage would destroy other devices.How should this battery be disposed of?Batteries must not be disposed of in household waste. As an industrial battery, it is subject to the regulations of the Battery Act. Please take the empty battery to the appropriate industrial or municipal collection points to ensure correct and environmentally friendly recycling.

The Tadiran SL-761S is a primary high-performance lithium thionyl chloride battery in the compact special size 2/3 AA. It was designed for maximum reliability and an extremely long operating life in space-critical applications. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal power solution for professional electronic assemblies where miniaturisation and longevity are important. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceCompact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for long and self-sufficient operating periods.High nominal voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding longevity: Designed for more than 10 years of operating and storage life.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, the Tadiran SL-761S is ideal for space-critical applications where a standard AA cell would be too large. It is the preferred choice for professional original equipment in compact sensors, for memory backup (RTC, CMOS) on densely populated boards, in smaller alarm systems and in medical technology. Its reliability also makes it indispensable for miniaturised GPS tracking modules and other mobile monitoring devices.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761S are based on its well thought-out construction. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy is almost completely available even after years of storage, which distinguishes the SL-761S from all other battery technologies. Characteristics  ModelTadiran SL-761/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Tadiran SL-761S batteryIs this battery rechargeable?No, the Tadiran SL-761S is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface that minimises self-discharge. With the first load, this layer can lead to a short voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.How long does the battery last and how should it be stored?The battery has a shelf life of more than 10 years. For maximum durability, we recommend storing it in a cool and dry place with low humidity.Which devices is this battery type suitable for?This battery type is intended exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology and miniaturised tracking systems.Does this model have solder connections?No, this SL-761S model is the standard version and is supplied without solder connections. It is intended for use in suitable battery holders. For direct installation on PCBs, Tadiran offers variants of this cell type with different solder connections.What makes this battery safer than other battery types?Safety is ensured by several factors: The hermetic glass-to-metal seal prevents leakage, the inorganic electrolyte is non-flammable and the cell is not under pressure at room temperature. This ensures a high level of operational safety.