Varta Lithium Battery CR1/2AA 3V 950mAh

The VARTA CR2/3AA is a high-performance 3-volt lithium primary battery developed for professional and industrial applications with the highest requirements for longevity and reliability. Based on lithium manganese dioxide technology (Li-MnO2), it offers high energy density, extremely low self-discharge and a very wide operating temperature range. As a loose cell, it is the ideal energy source for the initial equipment (OEM) of durable and low-maintenance electronic devices.Highlights at a glanceExtreme longevity: Up to 10 years of storage thanks to extremely low self-discharge.High energy density: Maximum energy in a compact form for prolonged autonomy.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +85 °C.High capacity: 1.35 Ah for energy-intensive applications with long run time requirements.Industrial top quality: Developed and manufactured for demanding OEM applications and safety-relevant electronics.Reliable energy for long-term applicationsThe VARTA CR2/3AA is the preferred power source for "fit and forget" applications where battery replacement is not planned for years. Its main area of use is for supplying security sensors (e.g. in alarm systems), smart meters (smart metering for water, gas, electricity), industrial control systems (PLC) and the backup of memory modules (SRAM/CMOS backup). It is the optimal solution for all self-sufficient, wireless devices.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the outstanding performance of this cell. It enables a high nominal voltage of 3 volts and an extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum serviceability even after many years of storage. The technology is also known for its high safety and reliability in industrial environments.Developed for industrial integrationAs a highly specialised single cell, the CR2/3AA is optimised for industrial further processing and assembly into battery solutions. Its robust construction and high quality ensure reliable integration into end devices. VARTA offers developers and manufacturers a reliable and powerful platform for the development of durable and low-maintenance products with this cell. Characteristics                                                                                                                                                        Model              VARTA Lithium Battery CR2/3AA               Battery type              Lithium manganese dioxide (Li-MnO2)               Rated voltage (V)              3.0               Capacity (mAh)              1350               Diameter (mm)              14.75               Height (mm)              33.5               Weight (g)              17.0        FAQs about the VARTA Lithium Battery CR2/3AAWhat is the main advantage of this lithium battery?The crucial advantage is the extremely long service and storage life of up to 10 years, combined with a very wide operating temperature range. It supplies reliable energy for many years and is therefore ideal for maintenance-free devices in which the battery is permanently built in.Is this battery rechargeable?No. This is a lithium primary battery. It must never be attempted to recharge it under any circumstances. Charging attempts are extremely dangerous and can lead to fire or explosion.How is this cell integrated into a device?As an industrial raw cell, the CR2/3AA is usually assembled with attached solder pins or solder tabs to then be safely soldered onto a circuit board. It can also be used in special battery holders.What does the size designation "2/3 AA" mean?This means that the cell has the same diameter as a standard AA battery, but only about two thirds of its height. This compact form allows use in space-critical applications.How should this battery be disposed of?Batteries must not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take the empty battery to the respective designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.

The Varta Longlife Power 4922, internationally standardised as 6LR61 (9V block), is the powerful and reliable power source for professional and industrial applications. This high-performance alkaline battery has been specially developed for use in safety-relevant and measurement technology devices where a constant and long-lasting power supply is crucial. As a loose single cell, it is ideal for initial equipment (OEM) and for direct use by commercial users.Highlights at a glanceHigh reliability: Designed for safety-critical applications such as smoke detectors and alarm systems.Industrial application: Ideal for measuring devices, medical technology and OEM production.Long shelf life: With 10 years guaranteed shelf life, perfect for stockpiling and production.Tested quality: Each cell meets the highest quality standards for maximum reliability and performance.Guaranteed performance: Proven Varta product performance, made in Germany.Powerful in professional applicationsThe Varta Longlife Power 6LR61 is the essential power source for a wide range of safety-related and professional devices. Its main area of use is in smoke and fire detectors, alarm systems, access control systems and medical devices (e.g. mobile monitoring devices). It also reliably powers measuring devices such as multimeters, professional audio devices such as wireless microphones and effect units as well as various transmitters and receivers in industry.Reliable and powerful alkaline technologyThe proven alkaline-manganese technology (Zn/MnO2) of the Longlife Power series is designed for high and stable power output. It offers superior performance and durability, especially in safety-critical devices where a constant power supply is essential. The high-quality workmanship "Made in Germany" also ensures maximum leak-proof protection and thus protects your valuable professional electronics.Developed for professional useVarta batteries stand for the highest quality and reliability. As an unpackaged single cell, the Longlife Power 6LR61 is directly intended for processing in industrial production (OEM) or for use as required in service and maintenance. This reduces packaging waste and optimises workflows for professional users who rely on consistently high quality. Features                                                                                                                                                          Model              Varta Longlife Power 4922 / 9V block               Battery type              Alkaline manganese               Nominal voltage (V)              9.0               Capacity (mAh)              640               Dimensions (H x L x W in mm)              48.5 x 26.5 x 17.5               Weight (g)              46.0               Connection              Push-button connection        FAQs about the Varta Longlife Power 6LR61 batteryWhat is the difference between "Longlife Power" and the "Industrial Pro" series?Both lines are aimed at professional users. The "Longlife Power" (formerly High Energy) is designed as a powerful all-rounder for devices with high, often fluctuating energy requirements (e.g. measuring devices, wireless microphones). The "Industrial Pro" is designed for maximum reliability and constant power output for OEM applications and devices in long-term continuous operation (e.g. in alarm systems).Why is this battery particularly recommended for smoke detectors?Its high capacity and the stable, long-lasting power output ensure a long and reliable operating life for the smoke detector. This reduces the frequency of battery changes and gives you the assurance that your smoke detector is ready for action in an emergency.Is this battery suitable for initial equipment (OEM)?Yes, the Longlife Power series as a loose cell is ideal for initial equipment, especially for devices that require a powerful and reliable 9V source. Its long shelf life is a decisive advantage for production planning.Is this battery rechargeable?No, the Varta Longlife Power 6LR61 is a primary battery and cannot be recharged. Charging attempts are dangerous and can lead to the battery leaking or bursting.How must this battery be disposed of?Batteries must not be disposed of with household waste. Please take the empty battery to the designated collection points in shops or municipal recycling centres to ensure environmentally responsible recycling.

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. Featuring maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclic use, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for a long-lasting power supply.VdS approved: G 189170 for safety-related applicationsMaintenance-free: Leak-proof AGM technology with > 99% gas recombination.High current-carrying capacity: Up to 360 A discharge current for 1 second.Flexible installation: Operation in all positions (except permanently upside down).Long-lasting: EUROBAT class “Standard Commercial” with a service life of up to 5 years.High performance for safety-critical applicationsThe NP12-12 delivers 12 Ah during a 20-hour discharge (down to 1.75 V/cell) and 11.1 Ah during a 10-hour discharge (down to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited to short-term power peaks.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, the NP12-12 is completely maintenance-free and leak-proof. The battery features self-closing low-pressure relief valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ in accordance with EN IEC 60896-21, and the short-circuit current is 320 A. The low self-discharge rate of approx. 3% per month allows for long-term storage whilst maintaining a high state of readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa NP12-12 lead-acid batteryWhat applications is the NP12-12 suitable for?The battery is ideal for:VdS-compliant fire and intruder alarm systemsUninterruptible power supplies (UPS)Emergency lightingTelecommunicationsControl and regulation technologyMedical technology devicesIs the battery maintenance-free?Yes, thanks to AGM technology, the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all positions, with the exception of a permanently upside-down mounted position.Which charging parameters (float vs cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charging limit: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarging: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3% per month at 20 °C

The Yuasa NP7-12L is an industrial, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 V and a capacity of 7 Ah (20 h). Leak-proof AGM technology, high current-carrying capacity and robust construction make this maintenance-free battery a reliable power source for emergency power applications, security systems or telecommunications.Highlights at a glanceReliable capacity: 7 Ah (20h) / 6.4 Ah (10h) at 12 V for a steady power supplyVdS approved: G 189099 for safety-critical applicationsCompact and powerful: Weighs just 2.2 kg with a maximum discharge current of 210 A (1 second)Long service life: EUROBAT classification “Standard Commercial” for up to 5 years’ service lifeMaintenance-free: Advanced VRLA-AGM technology with over 99% gas recombinationFlexible installation: Faston connectors (6.35 mm), can be operated in almost any positionCompact solution for critical applicationsWith a 20-hour capacity of 7 Ah (up to 1.75 V/cell), the NP7-12L delivers a stable power supply even under demanding conditions. With a 10-hour discharge rate down to 1.8 V/cell, the capacity is 6.4 Ah. Thanks to a peak current output of up to 210 A for 1 second, the battery is ideal for UPS systems, security and communications technology where reliability counts.Maintenance-free technology with high safetyThe sealed AGM (Absorbent Glass Mat) design ensures a gas-tight construction with self-closing vent valves for pressure regulation. The battery is maintenance-free, requires no topping up and, with a self-discharge rate of only approx. 3% per month, offers high storage stability, making it ideally suited for standby operation. The housing, made from robust ABS plastic, complies with the UL94:HB standard; a flame-retardant version in accordance with UL94:V0 is also available as an option. Its compact dimensions and low weight allow for easy integration, even in mobile systems.Features  ModelYuasa NP7-12L Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)7 (at a 20-hour rate) Maximum discharge current80A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 65 x 97.5 Weight (kg)2.6 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa 12V 7Ah lead-acid batteryWhat applications is the NP7-12L suitable for?The NP7-12L is ideal for emergency power systems (UPS), alarm systems, security and communications technology, as well as backup systems in industry and medicine.How long does the battery last?The battery offers an expected service life of up to 5 years at an ambient temperature of 20 °C and is classified as ‘Standard Commercial’ according to EUROBAT.How safe is the NP7-12L to use?The VRLA design enables safe, maintenance-free operation. The battery is equipped with self-closing vent valves and may be operated in any position – except permanently upside down.How do you charge the NP7-12L correctly?Float charging voltage (20 °C): 13.65 V (≈ 2.275 V/cell), temperature compensation –3 mV/cell/°CBoost/cycle charge: 14.5 V (≈ 2.42 V/cell), compensation –4 mV/cell/°CMax. charging current in cycle mode: 1.75 AWhat temperature ranges and storage conditions must be observed?Charging: −15 °C to +50 °CDischarge: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3% per month at 20 °C 

The VARTA CR2016 is a high-quality 3-volt lithium button cell and is one of the most widely used battery types for a wide range of small electronic devices. Based on proven lithium manganese dioxide technology (Li-MnO2), it offers reliable and long-lasting energy supply in a very flat design. Supplied in protective individual blister packaging, it is the ideal choice for car keys, scales, remote controls, and many other everyday devices.Highlights at a GlanceReliable performance: Consistent power output for flawless operation of your electronic devices.Universally usable: One of the most common button cells for a broad range of applications.Long shelf life: With a shelf life of up to 10 years, extremely durable and ready to use at any time.Wide temperature range: Works reliably even under demanding thermal conditions.Secure packaging: The childproof individual blister guarantees freshness and protects the cell until use.Reliable Power for Compact ElectronicsThe VARTA CR2016 is the preferred power source for countless everyday devices where compact size and reliability are crucial. Its main field of use is remote keys for vehicles, personal and kitchen scales, calculators, small remote controls, and in medical devices such as digital clinical thermometers. It also serves as a backup battery in cameras and organisers.Superior Lithium Manganese Dioxide TechnologyLithium manganese dioxide technology (Li-MnO2) allows for a high nominal voltage of 3 volts in a single, very flat cell. It is characterised by extremely low self-discharge, ensuring long shelf life of up to 10 years. This technology guarantees stable performance for a large portion of the battery lifespan and excellent performance even under fluctuating temperatures.Designed for Maximum Reliability and SafetyThe CR2016 is manufactured according to the highest quality standards to guarantee maximum reliability and leak protection. This safeguards your valuable electronic devices from being damaged. The protective and childproof individual blister ensures the battery retains full performance until use and can be safely stored protected from short circuits and external influences. Characteristics                                                                                                                                                        Model              VARTA Lithium Button Cell CR2016 (Single Blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3.0               Capacity (mAh)              90               Diameter (mm)              20.0               Height (mm)              1.6               Weight (g)              1.6        FAQs about the VARTA Lithium Battery CR2016What does the designation CR2016 mean?The designation gives information about the characteristics and size of the cell. “C” stands for the lithium chemistry, “R” for the round shape. The numbers “2016” represent the dimensions: 20.0 mm in diameter and 1.6 mm in height.Can I use two CR2016 instead of one CR2032?Although two CR2016 cells (2 x 1.6 mm = 3.2 mm) stacked have the same height as a CR2032 cell (3.2 mm) and the same voltage, this is strongly discouraged. Contact between the two cells is often unreliable and may cause malfunctions or damage to the device. Always use the battery type specified by the manufacturer.Is this battery rechargeable?No. This is a primary lithium battery. It must never be recharged under any circumstances. Attempting to charge it is extremely dangerous and may result in fire or explosion.How should this battery be disposed of?Batteries must not be disposed of in household waste. Please take the empty battery to the appropriate collection points in shops or municipal recycling centres to ensure environmentally sound recycling.

The Saft LS14500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in the standard AA size, developed for demanding industrial applications with high energy demand. It offers a nominal voltage of 3.6 V and a superior capacity of 2.6 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications that demand maximum reliability and long operating life.Highlights at a GlanceHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long storageRobust: Hermetically sealed stainless steel case for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for Versatile Industrial ApplicationsThe Saft LS14500 in AA format is the perfect energy solution for a wide variety of professional and industrial devices. Its high energy density makes it the first choice for wireless alarm systems, memory backup systems (memory back up), gas, water or electricity meters (metering), professional electronics as well as tracking systems. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed with a glass to metal seal to minimise the risk of leakage, and features a non-flammable electrolyte, which significantly increases operational safety. The LS14500 is compliant with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for safety-critical applications.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage down to the end of the discharge cycle, even after long storage periods. The robust construction reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application throughout the entire product lifetime. Features  ModelSaft LS14500 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal Voltage (V)3.6 Capacity (mAh)2600 Max. Continuous Discharge Current50 mA Self-dischargeapprox. 1% per year Operating Temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionStandard (industrial head) RechargeableNo  FAQs on the Saft LS14500 Lithium Cylindrical CellCan I replace a standard 1.5 V AA battery with a Saft LS14500?No, definitely not. The Saft LS14500 has a voltage of 3.6 V, which is more than double that of an ordinary alkaline or lithium AA battery (1.5 V). Using it in a device designed for 1.5 V batteries would immediately and irreparably damage the electronics.Is the Saft LS14500 rechargeable?No, the LS14500 is a lithium primary battery and must not under any circumstances be recharged. Any attempt to do so is dangerous and can lead to destruction of the cell, leakage or explosion.For which applications is the LS14500 particularly well suited?It is ideal for professional applications with low continuous current, which must function reliably for many years. These include, in particular, battery-operated sensors, meters (electricity, gas, water), security technology, memory buffering (memory back up) and GPS trackers.What is the difference to the Saft LS14250?The principal difference is in the size and capacity. The LS14500 is AA size and offers a capacity of 2.6 Ah. The LS14250, on the other hand, is half size (1/2 AA) and consequently has a lower capacity of 1.2 Ah. The choice depends on the energy requirement and available space in the application.How should the LS14500 be correctly disposed of?As a lithium battery it is subject to special disposal regulations. It must be given to appropriate municipal collection points or specialist retailers. Disposal with household waste is not permitted.