Lead
Sonnenschein GF 12 014 YF lead gel battery 12V 14Ah
The Sonnenschein GF 12 014 YF is an absolutely maintenance-free lead-gel block battery, developed for the highest demands on cycle durability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® gel technology, this battery offers exceptional service life and robustness. With a nominal voltage of 12V and a capacity of 14 Ah (C5), it is the ideal energy source for daily, demanding use in electric wheelchairs, golf caddies, and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout the entire service life, maximum reliability and leak-proof.High cycle durability: Developed for demanding, daily charging and discharging (approx. 450 cycles according to IEC 60254-1).Compact performance: High energy density in a compact and lightweight design.Deep discharge-proof: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant casing for the tough everyday life in mobile use.Maximum performance for rehab and leisure applicationsThe Sonnenschein GF 12 014 YF is the specialist for mobile, electrically powered vehicles in the rehab and leisure sector. Its main areas of application are electric wheelchairs, scooters, golf caddies and mobile lifting platforms. Wherever vehicles need to work reliably and maintenance-free on a daily basis, this battery provides the right energy and stamina.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and installable in any position, but also ensures excellent cycle durability and very low self-discharge. Unlike conventional wet-cell batteries, acid stratification is prevented, which considerably extends the service life in tough cycling use.Developed for durability and economyThe GF-Y series was developed for maximum economy and minimum downtime in professional use. The high cycle life reduces the need for premature replacement and thus lowers the total cost of ownership (TCO) of your equipment. Being absolutely maintenance-free eliminates the time and cost required for regular topping-up with water and ensures maximum occupational safety. Features ModelSonnenschein GF 12 014 YF ApplicationTraction / drive TechnologyLead gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)14 (C5) / 16 (C20) Cycle durabilityapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)181 x 76 x 167 ConnectionM5 female thread Weight (kg)approx. 5.9 FAQs about the Sonnenschein GF 12 014 YF lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specifically designed to supply electric motors with energy over a longer period of time. It is extremely cycle-resistant, meaning it can be deeply discharged and recharged regularly, as is the case with the daily use of, for example, electric wheelchairs. This distinguishes it from a starter battery.What is the main advantage of Dryfit® gel technology in mobile use?The decisive advantage is absolute maintenance freedom. With mobile devices, the time-consuming and error-prone checking and refilling of water is no longer necessary. In addition, the batteries are leak-proof, even when inclined or exposed to strong vibrations, which significantly increases operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how fast it is discharged. The C-rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications, as high currents flow here. C20 (discharge over 20 hours) is a common comparison value, where the nominal capacity is higher.How should this lead battery be disposed of?Lead batteries contain environmentally hazardous substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to local recycling centres to ensure proper recycling.
Sonnenschein GF 12 025 YG lead-gel battery 12V 25Ah
The Sonnenschein GF 12 025 YG is an absolutely maintenance-free lead-gel block battery that was developed for the highest demands on cycle stability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® gel technology, this battery offers an exceptional service life and robustness. With a nominal voltage of 12V and a capacity of 25 Ah (C5), it is the ideal energy source for daily, demanding use in electric wheelchairs, scooters and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for demanding, daily charging and discharging operations (approx. 450 cycles in accordance with IEC 60254-1).Compact performance: High energy density in a compact and common design.Deep discharge proof: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for tough everyday use in mobile applications.Maximum performance for rehab and leisure applicationsThe Sonnenschein GF 12 025 YG is the specialist for mobile, electrically powered vehicles in the rehabilitation and leisure sector. Its main areas of application are electric wheelchairs, scooters for senior citizens, golf caddies and mobile lifting systems. Wherever vehicles need to work reliably and maintenance-free on a daily basis, this battery provides the necessary energy and endurance.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and installable in any position, but also ensures excellent cycle stability and very low self-discharge. In contrast to conventional wet batteries, acid stratification is prevented, which considerably extends the service life in hard cycling operation.Developed for longevity and economyThe GF-Y series was developed for maximum economy and minimum downtime in professional use. The long cycle life reduces the need for premature replacement and therefore lowers the total cost of ownership (TCO) of your devices. Completely maintenance-free, it eliminates the time and expense of regular water refilling and ensures maximum work safety. Features ModelSonnenschein GF 12 025 YG ApplicationTraction / drive TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)25 (C5) / 28 (C20) Cycle stabilityapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)197 x 132 x 181 ConnectionM5 internal thread Weight (kg)approx. 9.7 FAQs about the Sonnenschein GF 12 025 YG lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specially designed to supply electric motors with energy over a longer period of time. It is extremely cycle-resistant, i.e. it can be regularly deeply discharged and recharged, as is the case with daily use of, for example, electric wheelchairs. This distinguishes it from a starter battery.What is the main advantage of Dryfit® gel technology in mobile use?The key advantage is the absolute freedom from maintenance. With mobile devices, there is no need for time-consuming and error-prone checking and refilling of water. In addition, the batteries are leak-proof, even when tilted or exposed to strong vibrations, which significantly increases operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications, as high currents flow here. C20 (discharge over 20 hours) is a common comparative value where the nominal capacity is higher.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer that sells new batteries, or to local recycling centres, to ensure proper disposal.
Sonnenschein GF 12 033 YG1 - 12 V 32.5 Ah gel traction battery
The Sonnenschein GF 12 033 YG1 is a maintenance-free gel battery from the robust GF-Y range (dryfit A500 Cyclic), specially developed for cyclic applications in the leisure and rehabilitation sector. It is characterised by reliability, durability and a high cycle life. With 32.5 Ah (C5) and 38 Ah (C20), it ensures a stable energy supply for various mobile applications.Highlights at a glance12 V block battery with 32.5 Ah (C5) and 38 Ah (C20)Maintenance-free thanks to sealed VRLA gel technology (dryfit)Up to 450 charge cycles according to IEC 60254-1Low self-discharge and long shelf lifeRobust design, deep-discharge proof and reliablePowerful for mobile applicationsThe GF 12 033 YG1 is ideal for use in golf caddies, electric wheelchairs, boats, hybrid vehicles and other traction applications. It impresses with its high performance and reliability in cyclic applications.Efficiency thanks to maintenance-free gel technologyThe dryfit gel technology ensures that no water needs to be topped up. The low self-discharge allows long storage without loss of performance, meaning the battery is always ready for use.Safety and reliabilityWith 450 cycles according to IEC 60254-1, the battery offers a high level of operational reliability and durability. It is deep-discharge proof, vibration-resistant and designed for a long service life. Features ModelSonnenschein GF 12 033 YG1 Battery typeVRLA lead-gel (traction battery) Nominal voltage (V)12 Capacity (Ah)33 (at 5h rate) Cycle lifeapprox. 700 cycles (according to IEC 60254-1) Charging voltage (cyclic operation)14.1V - 14.4V MaintenanceMaintenance-free (dryfit gel) Operating temperature (°C)-20 ~ 50 Self-dischargeVery low Dimensions (L/W/H, mm)197 x 132 x 180 Weight (kg)approx. 13.5 ConnectionAutopol (conical) StandardsIEC 60254-1 FAQs about the Sonnenschein GF 12 033 YG1 lead batteryFor which applications is the GF 12 033 YG1 suitable?The battery is ideal for golf caddies, electric wheelchairs, hybrid and electric boats, as well as other traction and leisure solutions.Is the GF 12 033 YG1 maintenance-free?Yes, the battery is absolutely maintenance-free thanks to VRLA gel technology. No need to refill with water.What is the service life of the battery?The battery offers up to 450 charge cycles according to IEC 60254-1.Can the battery be deep-discharged?Yes, the GF 12 033 YG1 is deep-discharge proof and thus reliable even in cyclic use.What are the technological advantages of dryfit® gel technology?The dryfit® gel technology stands out for its numerous advantages: it is maintenance-free, extremely low in gases, completely leak-proof and can be used in any position. It also scores with low self-discharge and long shelf life. Fast recharging is another plus. No transport restrictions (IATA DGR A67) and the technology is fully recyclable.
Sonnenschein GF 12 051 YG1 Lead-gel battery 12V 51Ah
The Sonnenschein GF 12 051 YG1 is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on cycle stability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® gel technology, this battery offers an exceptional service life and robustness. With a nominal voltage of 12V and a capacity of 51 Ah (C5), it is the ideal energy source for daily, demanding use in electric wheelchairs, scooters and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for demanding, daily charging and discharging operations (approx. 450 cycles in accordance with IEC 60254-1).High capacity: 51Ah (C5) for long runtimes in a standard design.Deep discharge proof: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for tough everyday use in mobile applications.Maximum performance for rehab and leisure applicationsThe Sonnenschein GF 12 051 YG1 is the specialist for mobile, electrically powered vehicles in the rehabilitation and leisure sector. Its main areas of application are electric wheelchairs, scooters for senior citizens, golf caddies and mobile lifting systems. Wherever vehicles need to work reliably and maintenance-free on a daily basis, this battery provides the necessary energy and endurance.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and installable in any position, but also ensures excellent cycle stability and very low self-discharge. In contrast to conventional wet batteries, acid stratification is prevented, which considerably extends the service life in hard cycling operation.H2: Developed for longevity and economyThe GF-Y series was developed for maximum economy and minimum downtime in professional use. The long cycle life reduces the need for premature replacement and therefore lowers the total cost of ownership (TCO) of your devices. Completely maintenance-free, it eliminates the time and expense of regular water refilling and ensures maximum work safety.Battery features ModelSonnenschein GF 12 051 YG1 ApplicationTraction / drive TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)51 (C5) / 56 (C20) Cycle stabilityapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)278 x 175 x 190 ConnectionG-M6 (M6 internal thread) Weight (kg)approx. 20.8 FAQs about the Sonnenschein GF 12 051 YG1 lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specially designed to supply electric motors with energy over a long period of time. It is extremely cycle-resistant, i.e. it can be regularly deeply discharged and recharged, which is the case with daily use, for example in electric wheelchairs. This distinguishes it from a starter battery.What is the main advantage of Dryfit® gel technology in mobile use?The decisive advantage is the absolute maintenance-free operation. In mobile devices, time-consuming and error-prone checking and topping up of water is no longer necessary. In addition, the batteries are leak-proof, even when tilted or subjected to heavy vibrations, which significantly increases operational safety when used in mobile applications.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications, as high currents flow here. C20 (discharge over 20 hours) is a common comparative value, where the nominal capacity is higher.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any dealer who sells new batteries or to municipal recycling centres to ensure proper recycling.
Sonnenschein GF 12 072 Y Lead gel battery 12V 72Ah
The Sonnenschein GF 12 072 Y is a completely maintenance-free lead-gel block battery designed for the highest demands of cycle stability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® Gel technology, this battery offers exceptional longevity and robustness. With a nominal voltage of 12V and a high capacity of 72 Ah (C5), it is the ideal energy source for demanding daily use in electric wheelchairs, scooters and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® Gel Technology: Completely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for demanding daily charge and discharge operation (approx. 450 cycles in accordance with IEC 60254-1).High capacity: 72Ah (C5) for long run times in a standard design.Deep discharge safe: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant case for tough everyday mobile use.Maximum performance for rehab and leisure applicationsThe Sonnenschein GF 12 072 Y is the specialist for mobile, electrically powered vehicles in the rehab and leisure sector. Its main areas of application are electric wheelchairs, scooters for seniors, golf caddies, mobile lifting systems and small cleaning machines. Wherever vehicles must work reliably and maintenance-free on a daily basis, this battery delivers the required energy and endurance.Proven Dryfit® Gel TechnologyThe Dryfit® Gel technology invented and perfected by Sonnenschein binds the electrolyte within a thixotropic silica gel. This makes the battery absolutely leak-proof and installable in any position, as well as ensuring excellent cycle resistance and very low self-discharge. Unlike conventional wet batteries, acid stratification is prevented, which significantly extends the service life in tough cycling operation.Developed for longevity and economyThe GF-Y series has been developed for maximum economy and minimal downtime in professional use. The long cycle life reduces the need for premature replacement and thus lowers the total cost of ownership (TCO) of your devices. The absolute maintenance-free design eliminates the time and cost for regular water refilling and ensures maximum operational safety. Features ModelSonnenschein GF 12 072 Y ApplicationTraction / drive TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)72 (C5) / 80 (C20) Cycle resistanceapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)330 x 171 x 236 ConnectionStandard car terminal (SAE) Weight (kg)approx. 30.0 FAQs about the Sonnenschein GF 12 072 Y lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specifically designed to supply electric motors with energy over a long period of time. It is extremely cycle-resistant, meaning it can be regularly deeply discharged and recharged, as is the case with daily use such as electric wheelchairs. This distinguishes it from a starter battery.What is the main advantage of Dryfit® Gel technology in mobile use?The key advantage is its absolute maintenance-free design. With mobile devices, the time-consuming and error-prone checking and refilling of water is eliminated. In addition, the batteries are leak-proof even when tilted or exposed to strong vibrations, which greatly increases operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications as high currents flow here. C20 (discharge over 20 hours) is a common comparative value in which the rated capacity is higher.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer who sells new batteries, or at municipal recycling centres, to ensure proper recycling.
Sonnenschein GF 12 094 Y Lead gel battery 12V 94Ah
The Sonnenschein GF 12 094 Y is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on cycle stability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® gel technology, this battery offers an exceptional service life and robustness. With a nominal voltage of 12V and a high capacity of 94 Ah (C5), it is the ideal energy source for daily, demanding use in electric wheelchairs, scooters and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for demanding, daily charging and discharging operations (approx. 450 cycles in accordance with IEC 60254-1).High capacity: 94Ah (C5) for long runtimes in a robust design.Deep discharge proof: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for tough everyday use in mobile applications.Maximum performance for rehab and leisure applicationsThe Sonnenschein GF 12 094 Y is the specialist for mobile, electrically powered vehicles in the rehabilitation and leisure sector. Its main areas of application are electric wheelchairs, scooters for senior citizens, golf carts, mobile lifting systems and small cleaning machines. Wherever vehicles need to work reliably and maintenance-free on a daily basis, this battery provides the necessary energy and endurance.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and installable in any position, but also ensures excellent cycle stability and very low self-discharge. In contrast to conventional wet batteries, acid stratification is prevented, which considerably extends the service life in hard cycling operation.Developed for longevity and economyThe GF-Y series was developed for maximum economy and minimum downtime in professional use. The long cycle life reduces the need for premature replacement and therefore lowers the total cost of ownership (TCO) of your devices. Completely maintenance-free, it eliminates the time and expense of regular water refilling and ensures maximum work safety. Battery features ModelSonnenschein GF 12 094 Y ApplicationTraction / drive TechnologyLead-gel (dryfit®) Rated voltage (V)12 Capacity (Ah)93.5 (C5) / 110 (C20) Cycle stabilityapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)286 x 269 x 230 ConnectionStandard Autopole (SAE) Weight (kg)approx. 38.5 FAQs on the Sonnenschein GF 12 094 Y lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specially designed to supply electric motors with energy over a longer period of time. It is extremely cycle-resistant, i.e. it can be regularly deeply discharged and recharged, which is the case, for example, in daily use in electric wheelchairs. This distinguishes it from a starter battery.What is the main advantage of Dryfit® gel technology in mobile use?The decisive advantage is the absolute freedom from maintenance. With mobile devices, there is no need for time-consuming and error-prone checking and topping up of water. In addition, the batteries are leak-proof, even when tilted or subjected to strong vibrations, which significantly increases operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications, as high currents flow here. C20 (discharge over 20 hours) is a common comparative value, where the nominal capacity is higher.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer who sells new batteries, or to municipal recycling centres, to ensure that it is recycled appropriately.
Sonnenschein A512/25 G5 Lead-gel battery 12V 25Ah
The Sonnenschein A512/25 G5 is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A500 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 25 Ah, it is the ideal energy source for fail-safe emergency power supplies in security technology, UPS systems and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A512/25 G5 is the specialist for standby parallel operation (standby use), where immediate and reliable power takeover in the event of a mains failure is crucial. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and security lighting systems, fire detection and alarm systems as well as the power supply in hospitals and telecommunications systems.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A500 series was developed for maximum economy over the entire service life. The extremely long service life of 12 years and more significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of the entire system. Battery features ModelSonnenschein A512/25 G5 ApplicationStandby / UPS / safety lighting TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)25 (C20) Design life12 years (Eurobat Long Life) Dimensions (L x W x H in mm)167 x 176 x 126 ConnectionG-M5 (M5 internal thread) Weight (kg)approx. 9.5 FAQs about the Sonnenschein A512/25 G5 lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The decisive advantage is the combination of absolute freedom from maintenance, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charging).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this one is optimised for standby parallel operation. It is permanently kept at a constant voltage (trickle charge) and only rarely has to release energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Sonnenschein Lead-acid battery A412/12 SR – Reliable
The Sonnenschein lead-acid battery A412/12 SR is a compact and powerful gel battery, ideal for a wide range of applications, including telecommunication systems, security systems and emergency power supplies. With a capacity of 12 Ah and robust gel technology, this battery offers a maintenance-free and long-lasting energy source. The A412/12 SR is characterised by its high reliability, low self-discharge and constant performance, even under extreme conditions. This battery is suitable for use in various environments and ensures a safe and stable power supply over a long period of time. Put your trust in the quality of Sonnenschein and secure a reliable power source for your requirements.
Sonnenschein A412/100 A lead gel battery 12V 100Ah
The Sonnenschein A412/100 A is an absolutely maintenance-free lead-gel block battery that has been developed to meet the highest demands for operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 100 Ah, it is the ideal energy source for fail-safe emergency power supplies in telecommunications, industrial plants and safety-relevant systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A412/100 A is the specialist for standby parallel operation (standby use), where an immediate and reliable power supply is crucial in the event of a mains failure. Its main areas of application are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems as well as power supply in power stations, substations and railway systems. Wherever a power failure would have serious consequences, this battery provides the necessary security.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A400 series was developed for maximum economy over the entire service life. The extremely long service life of 12 years and more significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of the overall system. Battery features ModelSonnenschein A412/100 A ApplicationStandby / UPS / safety lighting TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)100 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)498 x 110 x 287 ConnectionStandard Autopol (SAE) Weight (kg)approx. 35.0 FAQs about the Sonnenschein A412/100 A lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The decisive advantage is the combination of absolute freedom from maintenance, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charging).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this one is optimised for standby parallel operation. It is permanently kept at a constant voltage (trickle charge) and only rarely has to release energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Yuasa RE7-12LFR lead-acid battery with 12 V and 7 Ah
The Yuasa RE7-12LFR is a compact, maintenance-free VRLA industrial battery with 12 volts and 7 Ah (C20). It combines reliable power output with a flame-retardant case according to UL94 V0 and is suitable for professional applications where installation space is limited.Highlights at a glanceService life class: EUROBAT General Purpose 6 to 9 years, Yuasa service life up to 10 years at 20°C.Capacity: 7 Ah with 20-hour discharge to 1.75 V per cell, 6.2 Ah with 10-hour discharge to 1.8 V per cell.Solid power output: up to 105 A for 1 second, 42 A for 1 minute.Easy installation: FASTON plug-in terminals 6.35 mm.Low self-discharge: about 3 percent per month at 20°C.Maximum performance for compact applicationsThanks to AGM technology and valve-regulated oxygen recombination, the RE7-12LFR reliably delivers energy during short power peaks. Typical areas of application are safety and emergency lighting, fire alarm and intruder alarm systems, communication and control technology as well as small UPS and buffer applications.Efficiency meets long service lifeFor standby operation, the float charge voltage is 13.65 V ±1 percent per block (2.275 V per cell) at 20°C. The temperature compensation is minus 3 mV per cell and degree Celsius. For cyclic or heavy charging, 14.50 V ±3 percent per block (2.42 V per cell) is provided, with compensation of minus 4 mV per cell and degree Celsius. No current limitation is necessary for float charging; 1.75 A is recommended for heavy charging.Technology for flexible applicationsThe battery is designed for a wide temperature range. Charging, discharging and storage are each possible from minus 15°C to plus 45°C. The robust ABS case in FR version increases operational safety. Thanks to the FASTON 6.35 mm terminals, quick and safe installation is possible. VRLA batteries must not be operated in gas-tight enclosures; adequate ventilation must be ensured.Features ModelYuasa RE7-12LFR Battery typeVRLA AGM (cycle-proof, maintenance-free) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current70A (for 5 seconds) Charge voltage (float charge)13.5V to 13.8V Charge voltage (cyclic operation)14.4V to 15.0V Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)151 x 65 x 97.5 Weight (kg)2.5 ConnectionFASTON plug-in terminal 6.3mm CertificationsIEC 60896-21+22, UL, VdS FAQs about the Yuasa RE7-12LFR batteryFor which applications is the RE7-12LFR battery suitable?The RE7-12LFR is a 12 V VRLA AGM battery with 7 Ah, designed for standby and light cyclic applications, for example UPS, emergency lighting, fire and security technology and telecommunications.How is the battery installed?Installation is possible in any position, except permanently upside down. The electrical connection is made via FASTON 6.35 mm plug terminals. Please ensure correct polarity, secure fit and adequate ventilation.Is the case flame retardant?Yes, the case is made from flame-retardant ABS and complies with UL94 V0.Which charging voltages are recommended?Float charging 13.65 V ±1 percent per block at 20°C with temperature compensation of minus 3 mV per cell and degree Celsius. Cyclic or heavy charging 14.50 V ±3 percent per block with compensation of minus 4 mV per cell and degree Celsius. No current limitation is necessary in float charge, 1.75 A for heavy charge.Are there additional safety instructions?Each cell comes with a low-pressure relief valve. VRLA batteries can release hydrogen; do not operate the battery in gas-tight cases and dispose of it at the end of its life in accordance with local regulations.Which temperature ranges and self-discharge should be observed?Typical capacity loss is about 3 percent per month at 20°C. Operating ranges according to the datasheet: storage fully charged from minus 15 to plus 45°C, charging from minus 15 to plus 45°C, discharging from minus 15 to plus 45°C.
Sonnenschein A512/120 A - 12 V 120 Ah VRLA gel battery
The Sonnenschein A512/120 A is a powerful and maintenance-free gel battery from the A500 series. With proven dryfit gel technology, it is ideal for applications in telecommunications, emergency lighting, emergency power supply and power distribution. Its robust construction ensures durability and reliability, even under demanding operating conditions.Highlights at a glance12 V block battery with 120 Ah (C20, 1.75 V/C, 20 °C)Design life: 10–12 years (EUROBAT "Long Life")Maintenance-free thanks to sealed VRLA gel technologyGrid plates in lead-calcium alloy for high corrosion resistanceExtremely low gassing due to internal gas recombinationVery low self-discharge, storage capacity up to 2 years at 20 °CPowerful in a wide range of applicationsThe A512/120 A is ideally suited for UPS systems, telecommunications systems, security and hazard annunciation technology as well as power supply systems. With its high energy density, it ensures reliable and uninterrupted power supply.Efficiency and operational reliabilityThanks to dryfit gel technology and gas recombination, the battery operates with extremely low maintenance. The stable design guarantees safe performance, even with repeated charge and discharge cycles.Robust gel technologyThe reinforced grid plates in lead-calcium alloy increase corrosion resistance and ensure a long service life. At the same time, the design ensures a high load capacity, even under harsh operating conditions. Features ModelSonnenschein A512/120 A Battery typeVRLA lead-gel (dryfit) Nominal voltage (V)12 Capacity (Ah)120 (at 20h rate) Short-circuit current (A)2000 Charging voltage (float charge)13.5V (at 20°C) Charging voltage (boost)14.1V - 14.4V Operating temperature (°C)-20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12 years (EUROBAT: Long Life) Dimensions (L/W/H, mm)345 x 172 x 277 Weight (kg)approx. 39.5 ConnectionAutopole (conical) StandardsIEC 60896-21, ISO 9001 FAQs about the Sonnenschein A512/120 A lead batteryFor which applications is the A512/120 A suitable?The battery is ideal for UPS systems, telecommunications, emergency lighting, hazard annunciation technology and power supply systems.Is the A512/120 A maintenance-free?Yes, thanks to VRLA gel technology the battery is completely maintenance-free; it does not require topping up with water.What service life does the battery offer?The design life is 10–12 years according to EUROBAT classification "Long Life".Can the battery be transported without restrictions?Yes, ready-to-use gel batteries are not subject to any transport restrictions (IATA, DGR A67).What are the advantages of dryfit gel technology?It ensures low self-discharge, high cycle stability, safety and reliable performance even under adverse conditions.
Sonnenschein A512/140 A lead gel battery 12V 140Ah
The Sonnenschein A512/140 A is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on operational safety and an extremely long service life in professional standby applications. As part of the globally proven A500 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a high capacity of 140 Ah, it is the ideal energy source for fail-safe emergency power supplies in telecommunications, in industrial installations, and in safety-relevant systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum supply security for critical infrastructureThe Sonnenschein A512/140 A is the specialist for standby parallel operation (standby use), where immediate and reliable power takeover is crucial in the event of a power outage. Its main areas of application are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems, as well as power supply in power plants, substations, and railway facilities. Wherever a power failure would have serious consequences, this battery provides the necessary security.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against loss of capacity and makes the operation particularly safe and efficient, without the need to fill up with water.Developed for longevity and reliabilityThe A500 series was developed for maximum economy throughout the entire service life. The extremely long service life of 12 years or more considerably reduces the need for costly and complex battery replacements in permanently installed systems. The high manufacturing quality and the use of highly pure materials ensure consistent performance and thus contribute to the high operational reliability of the overall system. Features ModelSonnenschein A512/140 A ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)140 (C10) Design life12 years (Eurobat Long Life) Dimensions (L x W x H in mm)513 x 223 x 223 ConnectionStandard Autopol (SAE) Weight (kg)approx. 51.0 FAQs about the Sonnenschein A512/140 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology?The crucial advantage is the combination of absolute freedom from maintenance, highest cycle stability, and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent performance over a long period, making them the premium solution for critical standby applications.What does the "Eurobat Long Life" classification mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charge).What is the difference between a standby battery and a starter or solar battery?A standby battery like this is optimised for standby parallel operation. It is permanently maintained at a constant voltage (trickle charge) and only rarely needs to release energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily deep discharge and recharging.How should this lead-acid battery be disposed of?Lead-acid batteries contain substances that are harmful to the environment and must not be disposed of in household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper recycling.
Sonnenschein A512/200 A Lead-gel battery 12V 200Ah
The Sonnenschein A512/200 A is an absolutely maintenance-free lead-gel block battery with very high capacity, developed for the highest standards of operational safety and an extremely long service life in professional standby applications. As part of the globally proven A500 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a very high capacity of 200 Ah, it is the ideal energy source for fail-safe emergency power supplies in large industrial plants, data centres and safety-critical systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout its entire lifetime, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment protection.Very high capacity: 200 Ah for maximum bridging times during power outages.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Maximum security of supply for critical infrastructureThe Sonnenschein A512/200 A is the specialist for standby parallel operation, where immediate and reliable energy takeover in the event of mains failure is crucial. Its main fields of application are large uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems, as well as power supply in power stations, substations and railway systems. Wherever a power outage would have serious consequences, this battery provides the necessary security.Proven Dryfit® Gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A500 series was designed for maximum cost-effectiveness throughout its entire service life. The extremely long service life of 12 years or more significantly reduces the need for costly and laborious battery replacements in permanently installed systems. The high manufacturing quality and the use of highly pure materials ensure consistent performance and thus contribute to the high operational reliability of the overall system. Features ModelSonnenschein A512/200 A ApplicationStandby / UPS / Safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)200 (C10) Design life12 years (Eurobat Long Life) Dimensions (L x W x H in mm)518 x 274 x 242 ConnectionStandard auto pole (SAE) Weight (kg)approx. 69.0 FAQs about the Sonnenschein A512/200 A lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The main advantage is the combination of absolute maintenance freedom, the highest cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent performance over a long period, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charge).What is the difference between a standby battery and a starter or solar battery?A standby battery like this is optimised for standby parallel operation. It is permanently maintained at a constant voltage (float charge) and only rarely has to deliver energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharge and recharge.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge at any retailer selling new batteries or at local recycling facilities to ensure proper recycling.
Sonnenschein S12/90 A - 12 V 90 Ah gel solar battery
The Sonnenschein S12/90 A is a reliable and maintenance-free lead-gel battery from the proven SOLAR series. With innovative dryfit gel technology, it offers high cycle stability, long service life and safe energy supply for smaller to medium-sized photovoltaic applications, leisure and off-grid systems. With 90 Ah (C100), it impresses with its robustness and efficiency.Highlights at a glance12 V block battery with 90 Ah (C100, 1.80 V/C, 20 °C)Up to 800 charge cycles at 60% depth of discharge (C10, 20 °C)Maintenance-free thanks to VRLA gel technology (no water topping required)Very low self-discharge, storage capability up to 2 years at 20 °CDeep discharge-proof and robust for solar and leisure usePowerful in solar and leisure solutionsThe S12/90 A is ideal for photovoltaic systems, stand-alone systems, weekend homes, leisure vehicles, boats and other off-grid applications. With its high capacity it reliably provides energy even with repeated cycles and demanding operating conditions.Efficiency and operational reliabilityThe dryfit gel technology ensures maintenance-free operation, as no topping up with water is required. Thanks to its extremely low gassing and self-discharge, the battery offers a long shelf life and high operational reliability.Robust design for long service lifeWith a cycle stability of up to 800 cycles at 60% DoD and a robust housing, the S12/90 A is ideally designed for long-term use. Its construction is deep discharge-proof and ensures stable performance even with fluctuating charge and discharge cycles. Features ModelSonnenschein Solar S12/90 A Battery typeVRLA lead-gel (solar battery) Rated voltage (V)12 Capacity (Ah)90 (at 100h rate) Cycle lifeapprox. 1200 cycles (at 60% DoD) Charging voltage (cycle operation)14.1V - 14.4V MaintenanceMaintenance-free (dryfit gel) Operating temperature (°C)-20 ~ 50 Self-dischargeVery low Dimensions (L/W/H, mm)345 x 172 x 237 Weight (kg)approx. 31.0 ConnectionAutopole (tapered) StandardsIEC 61427, IEC 60896-21 FAQs about the Sonnenschein S12/90 A lead batteryWhat applications is the S12/90 A suitable for?The battery is ideal for photovoltaic systems, stand-alone systems, weekend homes, boats and other off-grid and leisure solutions.Is the S12/90 A maintenance-free?Yes, thanks to the sealed VRLA gel technology (dryfit), the battery is absolutely maintenance-free.What is the service life of the battery?The battery achieves up to 800 charge cycles at 60% depth of discharge (C10, 20 °C).Can the battery be deep-discharged?Yes, the S12/90 A is deep discharge-proof and therefore particularly reliable with repeated cycles.Which connection is intended for the battery?Connection is via the proven A-terminal (round pole).
Sonnenschein SOLAR S12/230 A lead-gel battery 12V 230Ah
The Sonnenschein S12/230 A is an absolutely maintenance-free lead-gel block battery with a very high capacity, specially developed for the extreme requirements in cyclical solar and off-grid use. As part of the globally proven Sonnenschein SOLAR series with Dryfit® Gel technology, this battery offers unrivalled cycle stability and reliability. With a nominal voltage of 12V and a very high nominal capacity of 230 Ah (C100), it is the ideal storage solution for self-sufficient energy systems, holiday homes, motorhomes, and marine applications.Highlights at a GlanceSuperior Dryfit® Gel Technology: Absolutely maintenance-free throughout its entire service life, maximum reliability and leak-proof.Extremely high cycle stability: Developed for daily deep charge-discharge operation (approx. 800 cycles at 60% DoD).Very high capacity: 230 Ah (C100) for reliable and long-lasting energy buffering over several days.Deep-discharge safe: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or phases of low sunlight.Maximum Supply Security for Autonomous SystemsThe Sonnenschein S12/230 A is the specialist for cyclical applications where the battery is charged and discharged daily. Its main areas of application are off-grid solar systems for holiday homes, mountain huts, camper vans, boats, and yachts. In addition, it is ideal for professional applications in telecommunications, traffic guidance systems or signalling systems requiring an independent and maintenance-free power supply.Proven Dryfit® Gel TechnologyThe Dryfit® Gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure during solar operation. The gel technology ensures excellent cycle stability and a very low self-discharge rate.Developed for Durability and ReliabilityThe SOLAR series was developed for maximum cost-effectiveness over the entire service life. Its extremely high cycle life greatly reduces the need for costly and time-intensive battery replacement. The high manufacturing quality and use of ultra-pure materials ensure consistent performance and thereby contribute to the high operational safety of your independent energy supply. Features ModelSonnenschein SOLAR S12/230 A ApplicationSolar / Cycle mode (Off-Grid) TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)200 (C10) / 230 (C100) Cycle stabilityapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)518 x 274 x 242 ConnectionStandard autopole (SAE) Weight (kg)approx. 69.0 FAQs on the Sonnenschein S12/230 A Lead-Gel BatteryWhat is the main advantage of Dryfit® Gel Technology in solar applications?In cyclical solar use, avoiding acid stratification is crucial. In gel batteries, the electrolyte is bound, which prevents stratification and makes the battery more resistant to deep discharges. This results in a significantly longer lifespan than with AGM or wet-cell batteries in this application.What do the capacity ratings C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, as slow discharges over several days are common here. C10 (discharge over 10 hours) is relevant for a faster discharge.What is the difference between this solar battery (S series) and a standby battery (A series)?A solar battery (cyclical) like this one is optimised for daily deep discharge and recharge (high number of cycles). A standby battery (A series) is designed for standby parallel operation (e.g. in UPS systems), is permanently charged, and only rarely discharged (long design lifespan in years).How should this lead battery be disposed of?Lead batteries contain environmentally hazardous substances and must not be disposed of in household waste. You can return your used battery free of charge to any dealer who sells new batteries or to municipal recycling centres to ensure proper recycling.
Sonnenschein SOLAR S12/130 A lead-gel battery 12V 130Ah
The Sonnenschein S12/130 A is an absolutely maintenance-free lead-gel block battery, specially developed for the extreme demands in cyclical solar and off-grid use. As part of the globally proven Sonnenschein SOLAR series with Dryfit® gel technology, this battery offers unrivalled cycle stability and reliability. With a nominal voltage of 12V and a high nominal capacity of 130 Ah (C100), it is the ideal storage solution for independent energy systems, holiday homes, motorhomes and marine applications.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout the entire service life, maximum reliability, and leak-proof.Extremely high cycle stability: Designed for daily, deep charging and discharging in solar installations.High capacity: 130 Ah (C100) for reliable and long-lasting energy buffering.Deep discharge resistant: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or periods of low solar radiation.Maximum supply security for autonomous systemsThe Sonnenschein S12/130 A is the specialist for cyclical applications where the battery is charged and discharged daily. Its main areas of use are off-grid solar systems for holiday homes, mountain huts, motorhomes, boats and yachts. It is also excellent for professional applications in telecommunications or signalling systems that require autonomous and maintenance-free power supply.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure in solar operation. The gel technology guarantees excellent cycle stability and a very low self-discharge rate.Designed for durability and reliabilityThe SOLAR series was developed for maximum economic efficiency over the entire service life. The extremely high cycle lifetime significantly reduces the need for costly and time-consuming battery replacements. High manufacturing quality and the use of high-purity materials ensure consistent performance and thus contribute to the high operational reliability of your autonomous energy supply. Features ModelSonnenschein SOLAR S12/130 A ApplicationSolar / cycle operation (Off-Grid) TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)104 (C10) / 130 (C100) Cycle stabilityapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)286 x 269 x 230 ConnectionStandard Autopol (SAE) Weight (kg)approx. 39.8 FAQs about the Sonnenschein S12/130 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology in solar operation?In cyclical solar operation, avoiding acid stratification is crucial. In gel batteries, the electrolyte is bound, which prevents stratification and makes the battery more resistant to deep discharges. This results in a significantly longer service life than with AGM or wet batteries in this application.What do the capacity indicators C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, since slow discharges over several days are more common here. C10 (discharge over 10 hours) is relevant with faster discharging.What is the difference between this solar battery (S-series) and a standby battery (A-series)?A solar battery (cyclical) like this is optimised for daily, deep discharge and recharging (high cycle count). A standby battery (A-series) is designed for standby parallel operation (e.g. in UPS systems), is permanently charged and only rarely discharged (long design life in years).How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally hazardous substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling depots to ensure proper recycling.
Sonnenschein A412/32 G6 lead gel battery 12V 32Ah
The Sonnenschein A412/32 G6 is an absolutely maintenance-free lead-gel block battery, developed for the highest demands on operational safety and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® Gel Technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 32 Ah, it is the ideal energy source for fail-safe emergency power supplies in security technology, UPS systems and in medical technology.Highlights at a glanceSuperior Dryfit® Gel Technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High storage capability and always ready for use in an emergency.Maximum supply security for critical infrastructureThe Sonnenschein A412/32 G6 is the specialist for standby-parallel operation (standby use), where immediate and reliable energy provision during a power failure is decisive. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and security lighting systems, fire alarm and security systems, as well as power supply in hospitals and telecommunications facilities.Proven Dryfit® Gel TechnologyThe Dryfit® Gel Technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient, with no need to top up with water.Designed for durability and reliabilityThe A400 series has been developed for maximum economic efficiency over the entire life cycle. The extremely long service life of 12 years and more significantly reduces the need for expensive and complex battery replacements in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure consistently high performance, thereby contributing to the high operational reliability of the entire system. Features ModelSonnenschein A412/32 G6 ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)32 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)210 x 176 x 174 ConnectionG6 (M6 internal thread) Weight (kg)approx. 14.5 FAQs about the Sonnenschein A412/32 G6 lead-gel batteryWhat is the main advantage of Dryfit® Gel Technology?The key advantage is the combination of absolute maintenance-free operation, highest cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and provide very consistent performance over a long period, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The classification "Long Life" means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct float charge).What is the difference between a standby battery and a starter or solar battery?A standby battery like this is optimised for standby-parallel operation. It is permanently maintained at a constant voltage (float charge) and only rarely releases energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily deep discharge and recharge.How must this lead-acid battery be disposed of?Lead-acid batteries contain environmentally hazardous substances and must not be disposed of as household waste. You can return your old battery free of charge to any retailer selling new batteries or at municipal recycling centres to ensure proper recycling.
Sonnenschein A512/60 A lead gel battery 12V 60Ah
The Sonnenschein A512/60 A is an absolutely maintenance-free lead-gel block battery developed for the highest demands on operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A500 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 60 Ah, it is the ideal power source for fail-safe emergency power supplies for security technology, UPS systems, and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free for the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum supply security for critical infrastructureThe Sonnenschein A512/60 A is the specialist for standby parallel operation (standby use), where immediate and reliable energy transfer is crucial in the event of a power failure. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and safety lighting systems, fire alarm and alarm systems, as well as power supply in hospitals and telecommunications systems.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient, without the need to top up with water.Developed for longevity and reliabilityThe A500 series was developed for maximum cost-effectiveness over the entire service life. The extremely long service life of 12 years and more significantly reduces the need for costly and laborious battery replacements in permanently installed systems. The high manufacturing quality and use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of the overall system. Features ModelSonnenschein A512/60 A ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Rated voltage (V)12 Capacity (Ah)60 (C20) Design life12 years (Eurobat Long Life) Dimensions (L x W x H in mm)261 x 171 x 210 ConnectionStandard Autopole (SAE) Weight (kg)approx. 23.5 FAQs about the Sonnenschein A512/60 A lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The crucial advantage is the combination of absolute maintenance-free operation, highest cycle stability, and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent performance over a long period, making them the premium solution for critical standby applications.What does the "Eurobat Long Life" classification mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected lifetime of 12 years or more under defined standby conditions (usually 20°C ambient temperature and proper float charging).What is the difference between a standby battery and a starter or solar battery?A standby battery like this is optimised for standby parallel operation. It is permanently kept at a constant voltage (float charge) and only rarely has to deliver energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharge and recharge.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer that sells new batteries or to local recycling centres to ensure proper recycling.
Sonnenschein A512/60 G6 lead-gel battery 12V 60Ah
The Sonnenschein A512/60 G6 is an absolutely maintenance-free lead-gel block battery, developed for the highest requirements of operational safety and extremely long service life in professional standby applications. As part of the internationally proven A500 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 60 Ah, it is the ideal source of power for fail-safe emergency power supply in security technology, UPS systems, and medical technology.Highlights at a glanceSuperior Dryfit® Gel Technology: Absolutely maintenance-free throughout the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and more) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Rugged construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High shelf life and always ready for immediate use in an emergency.Maximum supply security for critical infrastructureThe Sonnenschein A512/60 G6 is the specialist for standby parallel operation, where immediate and reliable takeover of power in the event of mains failure is critical. Its main areas of use are uninterruptible power supplies (UPS) for computer and server systems, emergency and security lighting systems, fire detection and alarm systems as well as power supply in hospitals and telecommunications systems.Proven Dryfit® Gel TechnologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also provides excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation especially safe and efficient without the need to top up water.Developed for longevity and reliabilityThe A500 series was designed for maximum economy over its entire service life. The extremely long service life of 12 years or more considerably reduces the need for costly and time-consuming battery replacements in permanently installed systems. High manufacturing quality and the use of high-purity materials ensure consistent performance and thus contribute to the high operational reliability of the entire system. Features ModelSonnenschein A512/60 G6 ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)60 (C20) Design life12 years (Eurobat Long Life) Dimensions (L x W x H in mm)261 x 171 x 210 ConnectionG6 (M6 internal thread) Weight (kg)approx. 23.5 FAQs about the Sonnenschein A512/60 G6 lead-gel batteryWhat is the main advantage of Dryfit® Gel Technology?The decisive advantage is the combination of absolute maintenance freedom, highest cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent output over a long period, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected lifespan of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charge).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this is optimised for standby parallel operation. It is continuously kept at a constant voltage (trickle charge) and only rarely needs to deliver energy. A starter battery is designed for short-term, high current. A solar battery (cycle battery) is optimised for daily deep discharge and recharge.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge at any dealer selling new batteries or at municipal recycling depots to ensure correct recycling.
Sonnenschein A412/90 A - 12 V 90 Ah VRLA gel battery
The Sonnenschein A412/90 A is a maintenance-free gel battery from the A400 series. It utilises the proven dryfit gel technology and offers an excellent price-performance ratio for long-term energy storage. This reliable battery is ideally suited for telecommunications and UPS systems, safety lighting, hazard detection technology, as well as various industrial applications.Highlights at a glance12 V block battery with 90 Ah (C10, 1.80 V/Z, 20 °C)Design life: 12 years and longer (EUROBAT "Long Life")Maintenance-free thanks to sealed VRLA gel technology (no need to top up with water)Very low gassing due to internal gas recombinationHigh corrosion resistance thanks to reinforced lead-calcium grid platesPowerful in critical applicationsThe A412/90 A is ideal for applications where an uninterruptible power supply is essential. These include telecommunications, emergency lighting, security systems, UPS systems and other off-grid applications. With 90 Ah capacity, it delivers stable performance even with repeated charging and discharging cycles.Efficiency and safety in operationThe dryfit gel technology reduces the maintenance effort to a minimum. Thanks to gas recombination, the battery is virtually gas-free, making it safe for use in sensitive environments. Its low self-discharge enables a long shelf life.Robust design for long service lifeWith reinforced grid plates made of lead-calcium alloy, the A412/90 A is particularly resistant to corrosion and designed for a service life of more than 12 years. It is resistant to deep discharge and offers maximum reliability even under harsh conditions. Features ModelSonnenschein A412/90 A Battery typeVRLA lead gel (dryfit) Nominal voltage (V)12 Capacity (Ah)90 (at 10h rate) Short-circuit current (A)1800 Charging voltage (float charge)13.38V - 13.5V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)-20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12 years (EUROBAT: Long Life) Dimensions (L/W/H, mm)345 x 172 x 277 Weight (kg)approx. 33.0 ConnectionAutopole (conical) StandardsIEC 60896-21, ISO 9001 FAQs about the Sonnenschein A412/90 A lead batteryFor which applications is the A412/90 A suitable?The battery is ideal for UPS systems, telecommunications, emergency and safety lighting, as well as hazard detection technology.Is the A412/90 A maintenance-free?Yes, thanks to VRLA gel technology, the battery is absolutely maintenance-free and requires no topping up with water.How long is the A412/90 A battery designed for use?It has a design life of 12 years at 20 °C, retaining around 80% of its original capacity after standard C10 use.Can the battery be deeply discharged?Yes, the battery is resistant to deep discharge and reliable even in cyclic operation.What are the dimensions, the weight and the connection of the A412/90 A?The battery measures 286 mm × 269 mm × 230 mm and weighs approx. 33 kg. It is equipped with an A terminal (round terminal), which allows easy integration.
Sonnenschein A412/120 A lead gel battery 12V 120Ah
The Sonnenschein A412/120 A is an absolutely maintenance-free lead-gel block battery developed for the highest demands in operational reliability and extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a high capacity of 120 Ah, it is the ideal energy source for fail-safe emergency power supplies in telecommunications, industrial facilities, and safety-relevant systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout its entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and more) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Delivers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for operation under demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum supply security for critical infrastructureThe Sonnenschein A412/120 A is the specialist for standby parallel operation (standby use), where immediate and reliable power take-over in case of mains failure is crucial. Its main areas of use are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems, as well as power supply in power stations, substations and railway systems. Wherever a power failure would have serious consequences, this battery provides the necessary security.Proven Dryfit® gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient, without the need for water refilling.Developed for longevity and reliabilityThe A400 series was developed for maximum cost-effectiveness over the entire service life. The extremely long lifespan of 12 years and more significantly reduces the need for costly and complex battery replacements in permanently installed systems. The high manufacturing quality and the use of ultra-pure materials ensure consistent performance and thus contribute to the high operational reliability of the overall system. Features ModelSonnenschein A412/120 A ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)120 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)513 x 223 x 223 ConnectionStandard Autopole (SAE) Weight (kg)approx. 47.0 FAQs about the Sonnenschein A412/120 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology?The key advantage is the combination of absolute maintenance freedom, maximum cycle life and extreme durability. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer extremely consistent performance over a long period, making them the premium solution for critical standby applications.What does the "Eurobat Long Life" classification mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (typically 20°C ambient temperature and correct trickle charge).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this one is optimised for parallel standby operation. It is permanently kept at a constant voltage (trickle charge) and is only rarely required to deliver energy. A starter battery is designed for brief, high current loads. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How should this lead-acid battery be disposed of?Lead batteries contain substances harmful to the environment and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or at municipal recycling centres to ensure proper disposal.
Sonnenschein SOLAR BLOCK SB12/100 A lead-gel battery 12V 100Ah
The Sonnenschein SB12/100 A is an absolutely maintenance-free, premium-class lead-gel block battery developed for the most demanding cyclic applications in professional solar systems. As part of the SOLAR BLOCK series, it combines proven Dryfit® gel technology with an extremely robust tubular plate construction. With a nominal voltage of 12V and a capacity of 100 Ah (C100), it offers the highest cycle life and reliability for self-sufficient energy systems.Highlights at a glanceSuperior tubular plate technology: Offers the highest cycle life and durability in demanding solar and traction use.Dryfit® gel technology: Absolutely maintenance-free throughout its entire service life, with maximum reliability and leak-proof design.Extremely long cycle life: Designed for thousands of charge and discharge cycles (approx. 1200 cycles at 60% DoD).Deep discharge proof: Excellent recovery even after repeated deep discharges and absolutely robust against acid stratification.Low self-discharge: Perfect for seasonal use and long periods of self-sufficiency.Maximum security of supply for self-sufficient systemsThe Sonnenschein SB12/100 A is the specialist for large and critical cyclical applications. Its main areas of use are medium- to large-scale off-grid solar systems, self-sufficient telecommunications stations, signalling systems, and demanding marine applications. Wherever the battery is the only energy source and is deeply discharged on a daily basis, this battery provides maximum service life and reliability.Proven Dryfit® gel and tubular plate technologyThe combination of Dryfit® gel and tubular plates (positively armoured) is the key to the extreme robustness of this battery. The gel binds the electrolyte, prevents acid stratification, and makes the battery maintenance-free. The tubular plate construction protects the active mass from decay during deep discharge cycles and ensures unrivalled durability compared to standard grid plate batteries.Developed for durability and reliabilityThe SOLAR BLOCK series was developed for maximum cost-effectiveness throughout its entire service life. The extremely long cycle life significantly reduces the need for costly and time-consuming battery replacements and lowers the system's total cost of ownership (TCO). The high manufacturing quality ensures consistent performance and maximum operational safety. Features ModelSonnenschein SOLAR BLOCK SB12/100 A ApplicationSolar / cyclic operation (off-grid) TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)89 (C10) / 100 (C100) Cycle lifeapprox. 1200 cycles (at 60% DOD) Dimensions (L x W x H in mm)513 x 189 x 223 ConnectionStandard car terminal (SAE) Weight (kg)approx. 36.5 FAQs about the Sonnenschein SB12/100 A lead-gel batteryWhat is the difference between this SOLAR BLOCK (SB) and the SOLAR (S) series?The SOLAR BLOCK (SB) series (this model) uses a tubular plate construction. It is designed for an extremely high number of cycles and the toughest daily use in large off-grid systems. The SOLAR (S) series (e.g. S12/130 A) uses grid plates and is also very cycle-resistant, but the SB series offers an even longer lifespan in high-performance cycling operation.What is the main advantage of Dryfit® gel technology in solar operation?In cyclic solar operation, avoiding acid stratification is crucial. In gel batteries the electrolyte is bound, which prevents stratification and makes the battery more resistant to deep discharge. This results in a much longer service life compared to AGM or wet batteries in this application.What do the capacity ratings C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate specifies the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, as slow discharges over several days are more common here. C10 (discharge over 10 hours) is relevant for a faster discharge.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any dealer who sells new batteries or to municipal recycling centres to ensure proper disposal.
Yuasa REW45/12 12 V 45 W high-load battery 8 Ah
The Yuasa REW45/12 is a maintenance-free VRLA high-performance battery with 12 volts, 45 W 10-minute power rating and 8 Ah (C20). Thanks to its optimised high-current discharge and compact design, it is ideal for UPS systems, safety and emergency lighting, fire alarm and burglar alarm systems as well as measurement and control technology.Highlights at a glanceHigh load performance: 252 W per block at 10 minutes up to 9.6 V block voltage, alternatively 42 W per cell up to 1.6 V/cell at 20 °C.Reliable capacity: 8 Ah with 20-hour discharge up to 1.75 V/cell, 6.96 Ah with 10-hour discharge up to 1.8 V/cell.Compact and lightweight: 151 x 64 x 94 mm, height above connector 97.5 mm, only 2.7 kg.Easy installation: FASTON plug connections 6.35 mm.Service life class: EUROBAT General Purpose 6 to 9 years, Yuasa service life up to 10 years at 20 °C.Maximum performance for demanding applicationsThe REW45/12 is designed for high discharge rates. With an internal impedance of just 24 mΩ, it reliably provides high power for short periods and protects connected systems from voltage drops. Typical areas of application are UPS systems with short backup times, alarm and security technology, as well as buffer applications with dynamic load profiles.Efficiency meets long service lifeA float charge voltage of 13.65 V ±1 percent per block (2.275 V/cell) at 20 °C applies for standby operation. Temperature compensation is minus 3 mV per cell and degree Celsius. For cyclic or rapid charge, 14.50 V ±3 percent per block (2.42 V/cell) is specified, with compensation of minus 4 mV per cell and degree Celsius. No current limitation is required for float charging, for rapid charging 2 A is recommended.Technology for flexible applicationsThe permissible temperature range for storage, charging and discharging is between minus 15 °C and plus 45 °C. The robust ABS housing according to UL94 HB increases operational safety. Each cell has a low-pressure relief valve for safe pressure regulation. Please ensure sufficient ventilation, as VRLA batteries can release hydrogen.Features ModelYuasa REW45-12 Battery typeVRLA AGM (high load, maintenance-free) Nominal voltage (V)12 Capacity (Ah)8 (at 20h rate) Maximum discharge current80A (for 5 seconds) Charging voltage (float)13.5V to 13.8V Charging voltage (cycle use)14.4V to 15.0V Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeDesign Life EUROBAT 6-9 years Dimensions (L/W/H, mm)151 x 65 x 97.5 Weight (kg)2.7 ConnectionBlade terminal 6.3mm CertificationsIEC 60896-21+22, UL, VdS FAQs about the Yuasa REW45/12 batteryWhat is the expected service life?The EUROBAT classification General Purpose specifies 6 to 9 years. For standby operation at 20 °C, Yuasa indicates a service life of up to 10 years.What is the REW45/12 particularly suitable for?For applications requiring high short-term performance such as UPS systems with short autonomy, emergency and safety lighting, alarm and signalling systems, as well as measurement and control technology.Which charging voltages are recommended?Float charge 13.65 V ±1 percent per block at 20 °C with temperature compensation of minus 3 mV per cell and degree Celsius. Cyclic or rapid charge 14.50 V ±3 percent per block with compensation of minus 4 mV per cell and degree Celsius. No current limitation is necessary for float charging, for rapid charging 2 A.May the REW45-12 be used in a closed housing?No, VRLA batteries can release hydrogen gas. Therefore, operation in tightly sealed housings is not permitted, and sufficient ventilation must be provided.Is the battery maintenance-free?Yes, the Yuasa REW45/12 is a valve-regulated AGM design with almost complete gas recombination; each cell has a low-pressure relief valve.Can the REW45-12 be used as a replacement for common 12 V-7 Ah blocks?Often yes, provided that there is sufficient space, 6.35 mm plug connections, appropriate charging parameters and the required high current rating for the application.
Yuasa NPW45-12 VRLA high performance battery
The Yuasa NPW45-12 is a compact VRLA high-performance battery with 12 volts, 45 W 10-minute power rating and 7.5 Ah (C20). It is optimised for high discharge rates and delivers reliable energy with short autonomy times. Ideal for UPS, safety and emergency lighting, alarm and signalling systems as well as measurement and control technology.Highlights at a glanceHigh load performance: 256 W per block at 10 minutes up to 9.6 V block voltage, alternatively 42.8 W per cell up to 1.6 V/cell at 20 °C.Reliable capacity: 7.5 Ah with 20-hour discharge up to 1.75 V/cell, 6.6 Ah with 10-hour discharge up to 1.8 V/cell.Compact and lightweight: 151 × 65 × 94 mm, height above connection 97.5 mm, only 2.7 kg.Simple installation: 6.35 mm FASTON connectors.Service life class: EUROBAT Standard Commercial 3 to 5 years, Yuasa service life up to 5 years at 20 °C.Maximum performance for demanding applicationsThe NPW45-12 is designed for high discharge rates. Thanks to its low internal impedance, it provides high power at short notice and keeps the output voltage stable. This makes it ideal for UPS systems with short bridging times, emergency and safety lighting, fire alarm and burglar alarm systems as well as dynamic buffer loads in control and communication technology.Efficiency meets long service lifeA float charge voltage of 13.65 V ±1 per cent per block (2.275 V/cell) at 20 °C applies for standby operation. Temperature compensation is minus 3 mV per cell and degree Celsius. For cyclic or heavy charging, 14.50 V ±3 per cent per block (2.42 V/cell) is provided, with compensation of minus 4 mV per cell and degree Celsius. No current limitation is required for float charging, for heavy charging 2.125 A is recommended.Technology for flexible applicationsThe permissible temperature range enables versatile applications: discharge from minus 15 °C to plus 50 °C, charging from 0 °C to plus 40 °C, storage from minus 15 °C to plus 40 °C. The robust ABS housing complies with UL94 HB, optional FR version according to UL94 V0 available. Each cell is equipped with a low-pressure relief valve for safe pressure regulation. Please ensure adequate ventilation, as VRLA batteries can release hydrogen.Battery features ModelYuasa NPW45-12 Battery typeVRLA AGM (high load, maintenance-free) Nominal voltage (V)12 Capacity (Ah)7.2 (at 20h rate) Maximum discharge current45 Watt per cell Charging voltage (trickle charge)13.5V to 13.8V Charging voltage (cycle operation)14.4V to 15.0V Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeDesign Life EUROBAT 6-9 years Dimensions (L/W/H, mm)151 x 65 x 97.5 Weight (kg)2.75 ConnectionFlat connector 6.3mm CertificationsIEC 60896-21+22, UL, VdS FAQ about the Yuasa NPW45-12 (High-Rate VRLA)What is the expected life of the NPW 45-12 battery?The EUROBAT classification Standard Commercial indicates a service life of 3 to 5 years. Yuasa indicates a service life of up to 5 years in standby mode at 20 °C.What is the NPW45-12 particularly suitable for?For applications with high short-term power such as UPS with short autonomy, emergency and safety lighting, alarm and signalling systems as well as measurement and control technology.How is the battery installed?Installation is possible in any position, except permanently upside down. The connection is made via FASTON 6.35 mm. Please ensure correct polarity, tight fit of the plug-in terminals and sufficient ventilation.Can the NPW45-12 be operated in a closed housing?No, VRLA batteries can release hydrogen. Operation in airtight enclosures is not permitted and adequate ventilation must be ensured.Is the NPW45-12 VdS-approved?The official product pages/data sheets do not state VdS approval for this model. Please check the requirements of your system.Is the NPW45-12 suitable for frequent charge/discharge cycles?It is primarily designed for standby/high current. For pronounced cycling applications, Yuasa recommends cyclic series (e.g. NPC/REC).
Exide Marathon L12V32 – compact 12 V AGM lead-acid battery
The maintenance-free Exide Marathon L12V32 is a 12 V AGM lead-acid battery from the Marathon L/XL series with a nominal capacity of 31.5 Ah (C10). This battery is characterised by a long service life of over 12 years (EUROBAT "Long Life"), a high power density and very low self-discharge. Thanks to its robust lead-calcium grid plates and AGM technology, it provides reliable energy for UPS systems, telecommunications, security lighting and other critical applications with medium bridging times.Highlights at a glanceMaintenance-free: no need to top up with water (VRLA/AGM)High power density with compact dimensionsVery low gassing (≈99 % internal recombination) & low self-dischargeDesign Life: ≥12 years (EUROBAT "Long Life")Transport without hazardous goods requirements for operational blocks (IATA A67)Powerful 12 V performance for short to medium bridgingThe L12V32 delivers reliable currents for power surges in UPS and TC applications. Typical constant current values (20 °C, final voltage per cell):1.90 V/C: 10 min 50 A, 30 min 27 A, 1 h 17 A, 10 h 2.8 A1.80 V/C: 10 min 70 A, 30 min 33 A, 1 h 20.2 A, 10 h 3.2 A Constant power example (1.90 V/C, 20 °C): 585 W (10 min), 318 W (30 min), 207 W (1 h).The short-circuit current of 966 A and an internal resistance of 13 mΩ underline its high-current capability.Long service life, high availability, low maintenanceAGM technology enables fast recharging and long waiting times in standby operation. The minimal gas development significantly reduces ventilation and maintenance requirements. Thanks to the low self-discharge, storage and standby times are extended, making this technology ideal for emergency power and safety systems.VRLA/AGM with robust grid plate chemistryThe electrolyte is immobilised in glass fleece (AGM). The lead-calcium grid plates ensure high corrosion resistance. With an internal gas recombination rate of approx. 99%, maintenance is reduced to a minimum. Development is according to IEC 60896-21/-22, manufacturing in ISO 9001 certified European facilities. The blocks are UL certified.Features ModelExide Marathon L12V32 Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)12 Capacity (Ah)32.8 (at 10h rate) Short-circuit current (A)1400 Charging voltage (float charge)13.62V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)195 x 130 x 181 Weight (kg)approx. 12.5 ConnectionM6 screw connection CertificationsISO 9001, ISO 14001, UL wFAQs for the Exide Marathon L12V32 batteryFor which applications is the L12V32 suitable?The L12V32 is designed for UPS systems, telecommunications, emergency and security lighting, hazard alarm technology as well as for energy and railway technology.How long is the expected service life?According to EUROBAT, the design life is in the "Long Life" class (≥ 12 years), depending on temperature, charge/discharge profile and installation.Is the battery maintenance-free?Yes, as a sealed VRLA/AGM accumulator there is no need to top up water. Regular visual and function checks in accordance with standards/manufacturer recommendation remain reasonable.Are there any transport restrictions?For operational blocks there are no special transport requirements according to IATA DGR, Section A67 (rail, road, sea, air).Is there a flame-retardant version?Yes, in addition to the standard PP housing (UL 94-HB), a UL 94-V0 variant is available.What does “incl. MTZ” mean?The package includes the mounting/accessory set (MTZ) for quick, standard-compliant installation (e.g. connectors/screws as per specification).
Sonnenschein SOLAR S12/85 A lead-gel battery 12V 85Ah
The Sonnenschein S12/85 A is an absolutely maintenance-free lead-gel block battery, specially developed to meet the requirements of cyclic solar and off-grid use. As part of the globally proven Sonnenschein SOLAR series using Dryfit® gel technology, this battery provides unrivalled cycle stability and reliability. With a nominal voltage of 12V and a nominal capacity of 85 Ah (C100), it is the ideal storage solution for medium stand-alone energy systems, signalling equipment and mobile applications.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout the entire service life, maximum reliability and leak-proof.High cycle stability: Designed for daily, deep charge and discharge operation (approx. 800 cycles at 60% DoD).High capacity: 85 Ah (C100) for reliable energy buffering over several days.Deep-discharge safe: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or periods of low solar irradiation.Maximum supply security for stand-alone systemsThe Sonnenschein S12/85 A is the specialist for cyclic applications where the battery is charged and discharged daily. Its main areas of application are off-grid solar systems for holiday homes, motorhomes, boats and yachts. It is also ideally suited for professional applications in telecommunications, traffic management systems, parking meters or signalling systems that require an autonomous and maintenance-free energy supply.Proven Dryfit® gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure in solar operation. The gel technology ensures excellent cycle stability and very low self-discharge.Developed for longevity and reliabilityThe SOLAR series was developed for maximum cost-effectiveness over the entire service life. The extremely high cycle life significantly reduces the need for costly and time-consuming battery replacements. The high manufacturing quality and the use of highly pure materials ensure constant performance and thus contribute to the high operational safety of your autonomous energy supply. Features ModelSonnenschein SOLAR S12/85 A ApplicationSolar / cyclic operation (off-grid) TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)74 (C10) / 85 (C100) Cycle stabilityapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)353 x 175 x 190 ConnectionStandard auto post (SAE) Weight (kg)approx. 25.5 FAQs about the Sonnenschein S12/85 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology in solar operation?The key advantage is the combination of absolute maintenance-free operation, maximum cycle stability and extreme durability. Compared with AGM batteries, gel batteries are often even more robust against deep discharges and provide very consistent performance over a long period of time.What do the capacity specifications C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications because slow discharge over several days is more common here. C10 (discharge over 10 hours) is relevant for faster discharge.What is the difference between this solar battery (S series) and a standby battery (A series)?A solar battery (cyclic) like this is optimised for daily deep discharge and recharging (high number of cycles). A standby battery (A series) is designed for standby parallel operation (e.g. in UPS systems), is permanently charged and only rarely discharged (long design service life in years).How must this lead-acid battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper recycling.
Sonnenschein Lead-acid battery A412/5.5 SR – High-performance gel battery f
Sonnenschein Lead-acid battery A412/5.5 SR – High-performance gel battery for a wide range of applications
Sonnenschein A606/200 – 6 V 200 Ah VRLA gel battery
The Sonnenschein A606/200 is a maintenance-free lead-gel battery from the high-quality A600 series. With its proven dryfit gel technology, it offers high reliability, long service life and maximum safety for stationary applications. It is specially designed for telecommunications, UPS systems, power supply, security and emergency lighting, and fulfils the highest requirements for operational safety and durability.Highlights at a glance6 V block battery with 200 Ah (C10, 1.80 V/C, 20 °C)Design service life: 15 years (EUROBAT "Long Life")Extremely low gassing due to internal gas recombinationHigh corrosion resistance due to tubular plate technologyDeep discharge-proof and robust constructionShelf life up to 2 years at 20 °C without rechargingPowerful for critical applicationsThe A606/200 is particularly suitable for use in telecommunications systems, UPS installations, power supply networks, hazard signalling technology as well as security and emergency lighting. With its high energy density and reliability, it ensures secure power supply also for longer bridging times.Efficiency and safety in operationThe internal gas recombination significantly reduces gassing and makes the battery extremely low-maintenance. Thanks to the sealed construction, the battery can be operated without topping up with water, which significantly reduces operating costs and maintenance effort.Tubular plate technology for long service lifeThe robust tubular plate construction provides high corrosion resistance, deep discharge security and a service life of up to 15 years. Even under harsh environmental conditions, the A606/200 ensures constant and reliable performance. Features ModelSonnenschein A606/200 Battery typeOPzV (lead gel / tubular plate) Nominal voltage (V)6 Capacity (Ah)200 (at 10h rate) Short-circuit current (A)5200 Charging voltage (float charge)6.75V (at 20°C) Charging voltage (boost charge)7.05V - 7.20V Design life20 years (at 20°C) Cycle life>1200 cycles at 80% depth of discharge MaintenanceMaintenance-free (VRLA gel) Dimensions (L/W/H, mm)244 x 191 x 410 Weight (kg)approx. 39.0 ConnectionM8 screw terminal StandardsIEC 60896-21/-22 FAQs about the Sonnenschein A606/200 lead batteryWhat applications is the A606/200 suitable for?The battery is ideal for telecommunications, UPS systems, power supply networks, security and emergency lighting as well as hazard signalling technology.Is the A606/200 maintenance-free?Yes, thanks to the VRLA gel technology (dryfit), the battery is absolutely maintenance-free and does not require topping up with water.How long is the battery's service life?The A606/200 has a design service life of up to 15 years according to EUROBAT classification "Long Life".What are the battery's dimensions, and how much does it weigh?The dimensions are 273 × 204 × 358 mm (length × width × height), and the weight is about 43 kg.How long can the A606/200 battery be stored without needing to be recharged?Thanks to extremely low self-discharge, the battery can be stored at 20 °C for up to 2 years without recharging and retains its performance.
Exide Sprinter P12V600 lead-acid battery with 12V and 24Ah
The Exide Sprinter P12V600 is a compact and powerful AGM lead-acid battery specially developed for applications with high current requirements. With a nominal voltage of 12 V and a capacity of 24 Ah (C10), it provides reliable power supply for uninterruptible power supply (UPS) as well as other safety-critical areas of application. Thanks to maintenance-free VRLA technology, robust housing and a service life of up to 10 years, the P12V600 is a dependable solution for industrial high-current applications.Highlights at a glanceHigh performance: 600 W with a 15-minute discharge to 1.60 V/cell.Long-lasting: Design life of 10 years at 20 °C, EUROBAT classification "High Performance".Maintenance-free: AGM technology with 99% gas recombination, no need to refill water.Reliable and safe: Complies with IEC 60896-21/-22, housing material as per UL 94-HB.Environmentally friendly: Fully recyclable, no transport restrictions (IATA, DGR A67).Powerful performance for critical applicationsThe batteries of the Exide Sprinter P series have been specially developed for high-current applications. With 600 watts output at a 15-minute discharge, the P12V600 is optimally suited for UPS systems, telecommunications systems and safety-related applications. Its lead-calcium alloy grid plates provide excellent high-current characteristics and long durability.Efficiency meets long service lifeWith a service life of up to 10 years (80% residual capacity at 20 °C), the P12V600 delivers reliable energy for long-term use. Very low self-discharge and short recharge times increase operational efficiency. The robust polypropylene housing as per UL 94-HB provides additional safety and protection in daily operation.Technology for reliable power supplyThanks to maintenance-free VRLA technology and 99% gas recombination, the P12V600 is extremely low-gassing and safe in use. The battery is free from restrictions on all transport routes and thus easy to handle logistically. As part of the Exide Sprinter P series, it is manufactured to the highest quality standards and provides a proven solution for continuous operation in critical infrastructures.Features ModelExide Sprinter P12V600 Battery typeVRLA AGM (High-Rate / UPS) Nominal voltage (V)12 Capacity (Ah)24 (at 10h rate) Short-circuit current (A)1200 Charging voltage (float charge)13.62V (at 20°C) Charging voltage (boost charge)14.1V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life10-12 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 9.8 ConnectionM6 screw terminal CertificationsISO 9001, ISO 14001, UL FAQs about the Exide Sprinter P12V600 lead-acid batteryHow long is the service life of the P12V600?The battery is designed for an operating life of up to 10 years at 20 °C and belongs to the EUROBAT "High Performance" class.What applications is the battery suitable for?The P12V600 is ideal for UPS systems, telecommunications, security power supply and other applications with high short-term current requirements.What safety features does the battery offer?It is maintenance-free, extremely low-gassing due to 99% gas recombination and features a robust housing material as per UL 94-HB.Can the P12V600 battery be transported?Yes, the lead-acid battery is not subject to any transport restrictions and can be safely shipped by road, rail, water or air (IATA, DGR A67).What charging parameters should be observed?The battery should be operated with the charging parameters recommended by the manufacturer. For standby operation, a float charge voltage of approx. 2.27 V/cell at 25 °C applies.
Exide Sprinter P12V875 lead-acid battery with 12V and 41Ah
The Exide Sprinter P12V875 is a compact AGM lead-acid battery specially developed for applications with high current requirements. With a nominal voltage of 12 V and a capacity of 41 Ah (C10), it impresses with its performance, long service life and maintenance-free VRLA technology. It is ideal for uninterruptible power supply (UPS) as well as other safety-critical applications.Highlights at a glanceHigh power output: 875 W with a 15-minute discharge down to 1.60 V/cell.Long service life: Design life of up to 10 years at 20 °C, EUROBAT classification “High Performance”.Maintenance-free: VRLA-AGM technology with 99 % gas recombination, no need to top up with water.Safe and reliable: Housing material in accordance with UL 94-HB, developed according to IEC 60896-21/-22.VdS approval: Tested safety for use in safety-related systems.Powerful performance for critical applicationsWith an output of 875 watts for a 15-minute discharge, the P12V875 is a reliable energy source for UPS systems, safety power supplies and telecommunications systems. The lead-calcium alloy grid plates ensure excellent high-current properties and consistently high performance even under peak loads.Efficiency meets long service lifeThe battery offers an expected service life of up to 10 years (80 % residual capacity at 20 °C) and belongs to the EUROBAT class “High Performance”. Thanks to AGM technology, it is extremely low-gassing and features very low self-discharge. The robust polypropylene housing, in accordance with UL 94-HB, provides additional safety and protection.Technology for demanding applicationsThe Exide Sprinter P12V875 is fully recyclable and maintenance-free over its entire service life. With an internal resistance of only 12.9 mΩ and a short-circuit current of 1000 A, it offers maximum operational safety. Thanks to M-M6 terminals, the battery is easy to install and secure to fasten.Features ModelExide Sprinter P12V875 Battery typeVRLA AGM (High-Rate / UPS) Nominal voltage (V)12 Capacity (Ah)41 (at 10h rate) Short-circuit current (A)1650 Charging voltage (float charge)13.62V (at 20°C) Charging voltage (boost)14.1V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life10-12 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)approx. 15.5 TerminalM6 screw terminal CertificationsISO 9001, ISO 14001, UL FAQs about the Exide Sprinter P12V875 lead-acid batteryHow long is the service life of the P12V875?The battery offers a service life of up to 10 years at 20 °C and is classified as EUROBAT “High Performance”.For which applications is the battery suitable?The P12V875 is ideal for UPS systems, safety power supplies and telecommunications systems that require high power at short notice.What safety features does the battery offer?The battery is maintenance-free, features a housing material in accordance with UL 94-HB, is VdS-approved and operates extremely low-gassing thanks to 99 % gas recombination.Are there any transport restrictions?No, the battery can be transported without restrictions in accordance with IATA, DGR A67 – whether by road, rail, air or sea.What charging parameters need to be observed?For standby operation, a float voltage of approx. 2.27 V/cell at 25 °C is recommended.
Sonnenschein A412/65 G6 lead-gel battery 12V 65Ah
The Sonnenschein A412/65 G6 is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 65 Ah, it is the ideal energy source for fail-safe emergency power supplies in security technology, UPS systems and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A412/65 G6 is the specialist for standby parallel operation (standby use), where an immediate and reliable power supply is crucial in the event of a mains failure. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and security lighting systems, fire detection and alarm systems as well as the power supply in hospitals and telecommunications systems.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A400 series was developed for maximum efficiency over the entire service life. The extremely long service life of 12 years and more significantly reduces the need for costly and time-consuming battery changes in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of the entire system. Battery features ModelSonnenschein A412/65 G6 ApplicationStandby / UPS / safety lighting TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)65 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)353 x 175 x 190 ConnectionG6 (M6 internal thread) Weight (kg)approx. 25.0 FAQs about the Sonnenschein A412/65 G6 lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The decisive advantage is the combination of absolute freedom from maintenance, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charging).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this one is optimised for standby parallel operation. It is permanently kept at a constant voltage (trickle charge) and only rarely has to release energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Sonnenschein A412/90 F10 lead gel battery 12V 90Ah
The Sonnenschein A412/90 F10 is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on operational reliability and a very long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 90 Ah, it is the ideal energy source for fail-safe emergency power supplies in telecommunications, industrial plants and safety-relevant systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.Long service life: Classified as "Long Life" (10 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A412/90 F10 is the specialist for standby parallel operation (standby use), where immediate and reliable energy transfer is crucial in the event of a power failure. Its main areas of application are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems as well as power supply in power stations, substations and railway systems. Wherever a power failure would have serious consequences, this battery provides the necessary security.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A400 series was developed for maximum economy over the entire service life. The long service life of 10 years and more significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of the entire system. Characteristics ModelSonnenschein A412/90 F10 ApplicationStandby / UPS / Telecommunications TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)90 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)394 x 174 x 224 ConnectionF10 (M8 internal thread) Weight (kg)approx. 33.5 FAQs about the Sonnenschein A412/90 F10 lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The decisive advantage is the combination of absolute freedom from maintenance, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 10 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charging).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this one is optimised for standby parallel operation. It is permanently kept at a constant voltage (trickle charge) and only rarely has to release energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Sonnenschein SOLAR S12/60 A lead-gel battery 12V 60Ah
The Sonnenschein S12/60 A is an absolutely maintenance-free lead-gel block battery, specially developed for the requirements of cyclical solar and off-grid use. As part of the globally proven Sonnenschein SOLAR series featuring Dryfit® gel technology, this battery provides unrivalled cycle life and reliability. With a nominal voltage of 12V and a nominal capacity of 60 Ah (C100), it is the ideal storage solution for small independent energy systems, signalling installations and mobile applications.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout its service life, maximum reliability and leak-proof.High cycle life: Developed for daily, deep charge and discharge operation (approx. 800 cycles at 60% DoD).Compact design: High energy density in a compact and robust housing.Deep-discharge safe: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or periods of low sunlight.Maximum supply reliability for independent systemsThe Sonnenschein S12/60 A is the specialist for cyclical applications where the battery is charged and discharged daily. Its main fields of use are small off-grid solar systems for holiday homes, motorhomes, boats and yachts. It is also highly suitable for professional applications in telecommunications, traffic control systems, parking ticket machines or signalling installations that require an independent and maintenance-free power supply.Proven Dryfit® gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, immobilises the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure in solar operation. The gel technology provides excellent cycle life and very low self-discharge.Developed for longevity and reliabilityThe SOLAR series has been developed for maximum cost-effectiveness throughout its lifetime. The extremely high cycle life significantly reduces the need for costly and labour-intensive battery changes. The high manufacturing quality and use of high purity materials ensures constant performance and contributes to the high operational reliability of your independent energy supply. Features ModelSonnenschein SOLAR S12/60 A ApplicationSolar / cycle operation (Off-Grid) TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)50 (C20) / 60 (C100) Cycle lifeapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)261 x 136 x 230 ConnectionStandard automotive pole (SAE) Weight (kg)approx. 19.0 FAQs about Sonnenschein S12/60 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology in solar operation?The key advantage is the combination of absolute maintenance freedom, highest cycle life and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and provide very consistent performance over a long period of time.What do the capacity specifications C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate specifies the discharge current. C100 (discharge over 100 hours) is the standard for solar applications since slower discharges over several days are common. C10 (discharge over 10 hours) is relevant for faster discharge.What is the difference between this solar battery (S-series) and a standby battery (A-series)?A solar battery (cyclic) like this is optimised for daily, deep discharge and recharge (high number of cycles). A standby battery (A-series) is designed for standby parallel operation (e.g., in UPS systems), is charged permanently and only rarely discharged (long design life in years).How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer selling new batteries or at municipal recycling centres to ensure professional recycling.
Sonnenschein Lead-acid battery GF 12 105 V
""Sonnenschein Lead-acid battery A512/140 A incl. MTZ Nominal voltage: 12 V Nominal capacity 20h: 140 Ah Max. Max. load: 770 A Connection: A Maintenance-free over the entire service life Deep discharge-proof in accordance with DIN 43 534 Tried and tested worldwide and successful dryfit technology Extremely low gassing due to internal gas recombination Grid plate in lead-calcium alloys Service life 6 years Very low self-discharge rate and therefore long shelf life Short recharging times Fully recyclable 7 years Design life at an ambient temperature of 20 °C (80% residual capacity) Excellent energy storage properties combined with high reliability The lead batteries from Sonnenschein have a stable and reliable capacity, are deep discharge-proof, maintenance-free, fully recyclable and tried and tested worldwide. ""
Sonnenschein GF 12 065 Y - 12 V 65 Ah lead-gel battery
The Sonnenschein GF 12 065 Y is a maintenance-free lead-gel battery from the robust GF-Y series (dryfit® A500 cyclic). It was specially developed for cyclical applications in the leisure and rehabilitation sector and impresses with its reliability, robustness and high level of safety. With 65 Ah (C5) and 78 Ah (C20), it is suitable for use in electric and hybrid boats, golf caddies, electric wheelchairs and many other traction applications.Highlights at a glance12 V block battery with 65 Ah (C5) and 78 Ah (C20)Maintenance-free thanks to sealed VRLA gel technology (no need to top up with water)Up to 450 charging cycles according to IEC 60254-1Deep discharge-proof and robust in useHigh intrinsic safety and reliable performance100% recyclable and environmentally friendlyPowerful for mobile applicationsThe GF 12 065 Y is ideal for mobile applications such as golf caddies, electric and hybrid boats, rehab vehicles and other traction solutions. Its cycle stability and stable energy output make it a reliable companion for everyday use.Efficiency through gel technologyThanks to dryfit® gel technology, there is no need to top up with water. The battery is characterised by low self-discharge, which ensures a long service life even after long periods of inactivity.Safety and reliabilityThe sealed design makes the battery maintenance-free and particularly safe to operate. Thanks to its robust design, it is protected against deep discharge and offers a constant energy supply even with repeated charging and discharging cycles. Battery features ModelSonnenschein GF 12 065 Y Battery typeVRLA lead-gel (traction battery) Rated voltage (V)12 Capacity (Ah)65 (at 5h rate) Cycle lifeapprox. 700 cycles (according to IEC 60254-1) Charging voltage (cycle operation)14.1V - 14.4V MaintenanceMaintenance-free (dryfit gel) Operating temperature (°C)-20 ~ 50 Self-dischargeVery low Dimensions (L/W/H, mm)242 x 175 x 275 Weight (kg)approx. 27.5 ConnectionAutopol (conical) StandardsIEC 60254-1 FAQs for the Sonnenschein GF 12 065 Y gel batteryWhat applications is the GF 12 065 Y suitable for?The battery is ideal for golf caddies, electric wheelchairs, hybrid and electric boats and many other traction applications.Is the GF 12 065 Y maintenance-free?Yes, thanks to the sealed VRLA gel technology, the battery is completely maintenance-free and does not require topping up with water.How many charging cycles can the gel battery perform?It achieves around 450 cycles at 75 % discharge according to the IEC standard. Some sources even state up to 700 cycles, which emphasises a particularly high cycle tolerance.Which connection does the battery have?The GF 12 065 Y is equipped with an A terminal (Autopol), with the positive terminal on the right-hand side.What are the dimensions and weight of the GF 12 065 Y battery?The battery measures 353 × 175 × 190 mm (L × W × H) and weighs approx. 26.8 kg.
Sonnenschein SOLAR S12/27 G5 lead-gel battery 12V 27Ah
The Sonnenschein S12/27 G5 is an absolutely maintenance-free lead-gel block battery that has been specially developed for the requirements of cyclical solar and off-grid applications. As part of the globally proven Sonnenschein SOLAR series with Dryfit® gel technology, this battery offers unrivalled cycle stability and reliability. With a nominal voltage of 12V and a nominal capacity of 27 Ah (C100), it is the ideal storage solution for small self-sufficient energy systems, signalling systems and mobile applications.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for daily, deep charging and discharging operation (approx. 800 cycles at 60% DoD).Compact design: High energy density in a compact and robust housing.Deep discharge proof: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or periods of low solar radiation.Maximum security of supply for self-sufficient systemsThe Sonnenschein S12/27 G5 is the specialist for cyclical applications where the battery is charged and discharged daily. Its main areas of application are small off-grid solar systems for holiday homes, motorhomes, boats and yachts. It is also ideal for professional applications in telecommunications, traffic guidance systems, parking machines or signalling systems that require a self-sufficient and maintenance-free energy supply.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure in solar operation. The gel technology ensures excellent cycle stability and very low self-discharge.Developed for longevity and reliabilityThe SOLAR series was developed for maximum economy over the entire service life. The extremely long cycle life significantly reduces the need for costly and time-consuming battery replacements. The high production quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of your self-sufficient energy supply. Battery features ModelSonnenschein SOLAR S12/27 G5 ApplicationSolar / cycle operation (off-grid) TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)27 (C100) Cycle stabilityapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)167 x 176 x 126 ConnectionG-M5 (M5 internal thread) Weight (kg)approx. 9.6 FAQs on the Sonnenschein S12/27 G5 lead-gel batteryWhat is the main advantage of Dryfit® gel technology in solar operation?Avoiding acid stratification is crucial in cyclic solar operation. In gel batteries, the electrolyte is bound, which prevents stratification and makes the battery more resistant to deep discharges. This leads to a significantly longer service life than with AGM or wet batteries in this application.What do the capacity specifications C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, as slow discharges over several days are common here. C10 (discharge over 10 hours) is relevant for faster discharging.What is the difference between this solar battery (S series) and a standby battery (A series)?A solar battery (cyclic) like this one is optimised for daily, deep discharge and recharging (high number of cycles). A standby battery (A series) is designed for standby parallel operation (e.g. in UPS systems), is permanently charged and only rarely discharged (long design service life in years).How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Yuasa Lead-acid battery with 12V and 66 Ah - SWL1850
The YUASA SWL 1850 lead-acid battery impresses with a high power density, 66 Ah capacity and excellent reliability for demanding industrial applications. Ideal for systems that rely on constant power supply and high safety reserves.Highlights at a glanceHigh Performance: EUROBAT "High Performance" for up to 12 years of use.High power output: Delivers 1850 watts with a 10-minute discharge up to 9.6 V.Flexible installation: Installation possible in almost any position.Robust safety: Low-pressure relief valves for safe operation.Powerful performance for demanding areas of useThe YUASA SWL1850 is part of the well-established SWL range of valve-regulated lead-acid batteries (VRLA) and provides outstanding performance for short-term high-current applications. With a 10-minute constant power discharge rate of 1850 watts to 9.6 V, it is ideal for UPS systems, safety lighting, telecommunications systems and other critical applications. Its maximum discharge current of 800 A (1 second) gives additional power reserves during sudden peak loads.Efficient energy and long service lifeWith its EUROBAT "High Performance" classification, the SWL1850 achieves a service life of up to 12 years at 20 °C. The low self-discharge of around 3 % per month ensures that the battery remains ready for operation even after extended periods of inactivity. The housing is made of robust ABS plastic and is optionally available in a flame-retardant version (UL94:V0) to meet additional safety requirements.Technology for versatile applicationsThe SWL1850 can be installed in almost any position except permanently upside down. The battery is equipped with M6 female threaded connectors that ensure a secure and stable connection. The recommended charging current for cyclic operation is max. 16.5 A, while no limit is needed for float charging. Low-pressure relief valves reliably regulate the gas pressure within the cells, ensuring safe and low-maintenance operation. The battery meets numerous international standards and certifications, including ISO 9001, ISO 14001, OHSAS 18001 as well as IEC61056 and IEC60896-21/22 standards. ModelYuasa SWL1850 Battery TypeAGM VRLA (valve-regulated) Nominal Voltage (V)12 Capacity (Ah)66 (at 10h rate) Maximum Discharge Current (A)800 (1 second) ConnectionM6 female thread ApplicationHigh performance battery for UPS systems Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)23.8 FAQs about the Yuasa 12V lead-acid batteryWhat is the service life of the SWL1850?The SWL1850 belongs to the EUROBAT "High Performance" class and offers an expected service life of up to 12 years at 20 °C.For which applications is the battery suitable?The SWL1850 is particularly suitable for:Uninterruptible power supplies (UPS) Telecommunications systems Safety and emergency lighting Medical devices Photovoltaic systems Fire alarm and safety systemsCan the battery be installed flexibly?Yes, the battery can be operated in almost any position, except permanently upside down.What safety features does the SWL1850 offer?The battery features a robust case, low-pressure relief valves for gas pressure regulation, and the option of a flame-retardant case (UL94:V0).What is the maximum discharge current?The SWL1850 delivers up to 800 A for 1 second and up to 500 A for 1 minute, making it ideal for short-term high current loads.How high is the self-discharge?The self-discharge is approx. 3 % per month at 20 °C, ensuring the battery remains ready for use even after longer periods of inactivity.
Vision Lead-acid battery CP1223 with 12V and 2.3Ah
The Vision CP1223 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery delivers a safe and consistent power supply for a wide range of applications, particularly in security and medical technology.Highlights at a glanceCompact power: 2.3 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104099 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1223 provides a rated capacity of 2.3 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM System (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1223 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features ModelVision CP1223 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4,8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1223 lead-acid batteryWhat applications is the CP1223 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1223?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A to maximise the battery's service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connector. These are flat-pin connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick, tool-free installation.
Vision Lead-acid battery CP1270 with 12V and 7Ah
The Vision CP1270 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1270 provides a rated capacity of 7 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound within a glass fibre mat, the CP1270 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features ModelVision CP1270 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1270 lead-acid batteryWhat applications is the CP1270 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category “Standard Commercial”.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lights. Please compare the voltage (12V), capacity (7Ah), dimensions and the connection type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the battery’s service life.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connections with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, which enables quick and tool-free installation.
Vision lead-acid battery CP12120F2 with 12V and 12Ah
The Vision CP12120F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP series has been developed for high reliability in standby operation as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and long-lasting power supply for a wide range of applications, from security systems to emergency power supplies.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting power supply.VdS approved: G 104011 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode at 20 °C.Maintenance-free: Leak-proof and sealed AGM technology with a gas recombination rate of over 99%.High current-carrying capacity: Suitable for loads requiring high inrush currents for short periods.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured in accordance with ISO 9001 and ISO 14001 standards to ensure consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 delivers a capacity of 12 Ah during a 20-hour discharge. It is designed as a general-purpose battery and performs well both in standby parallel operation (float) and during occasional cyclic discharges. With a maximum discharge current of 180 A for 5 seconds, this battery is also ideally suited for short-term power peaks, such as those occurring in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is bound within a glass fibre mat, the CP12120F2 is completely maintenance-free and leak-proof. This ensures safe operation in sensitive environments. The low self-discharge rate of approximately 3% per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against mechanical impact.Features ModelVision CP12120F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6,35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP12120F2 lead-acid batteryWhat applications is the CP12120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (FAS)Emergency lightingMedical devicesTelecommunications equipmentIs the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP12120F2?The service life in standby mode (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20 °C, which corresponds to the EUROBAT category ‘Standard Commercial’.What is the difference between this battery and a purely cycle-resistant type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A battery designed purely for cycling is specifically engineered for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cycle-resistant type would achieve a longer service life.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A so as not to affect the service life.What temperature ranges and storage conditions apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CSelf-discharge: approximately 3 % per month at 20 °C. For longer storage, it is recommended that the battery be recharged every 6 months.
Vision Lead-acid battery CP12170X with 12V and 17Ah
The Vision CP12170X is a highly reliable, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 17 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12170X meets the highest standards of quality and operational reliability.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.VdS approved: G 104064 for safety-related applicationsHigh capacity: 17 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: A leak-proof design and a robust housing ensure safe operation.Low self-discharge: Ensures a long shelf life and guarantees high operational readiness.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Reliable performance for safety-critical applicationsThe Vision CP12170X delivers a capacity of 17 Ah during a 20-hour discharge. Its design is optimized for standby parallel operation, in which it is constantly maintained at charging voltage so that it can immediately provide full power in the event of a power failure. With its low internal resistance, the battery is capable of delivering high currents even for short periods, making it an ideal choice for demanding UPS systems and other safety-critical systems.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP12170X is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20 °C allows for long-term storage. The robust casing made of impact-resistant ABS plastic is also available in a flame-retardant version compliant with UL94:V0 on request.Features ModelVision CP12170X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)17 (at a 20-hour rate) Maximum discharge current255A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP12170X lead-acid batteryWhat applications is the CP12170X suitable for?The battery is ideal for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devices What does the long service life of up to 10 years mean?The specification "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20 °C. The actual service life achieved depends heavily on operating conditions such as ambient temperature, charging voltage and the frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12170X uses higher-quality materials and a more robust grid construction than standard batteries. This results in less corrosion and wear during continuous charging, which enables a significantly longer service life in standby mode and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby mode, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No topping up with water is necessary and it can be operated safely in appliances and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in any position, with the exception of a permanently inverted position. This allows for flexible integration into a wide variety of devices and systems.
Vision Lead-acid battery CP12240HX with 12V and 24Ah
The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.
Vision lead-acid battery 6FM40X with 12V and 40Ah
The Vision 6FM40X is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 40 ampere-hours. It is specially designed for demanding applications involving repeated charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery delivers a reliable, leak-proof, and long-lasting power supply. It is the ideal solution for systems requiring high cycle stability, deep discharges, and an extended service life, and excels in both cyclic and standby applications.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.VdS approved: G 107076 for safety-related applicationsHigh capacity: 40 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to leak-proof AGM technology with over 99% gas recombination.Low self-discharge: Only approx. 3% capacity loss per month at 20 °C, which allows for long-term storage.Flexible installation: Operation is possible in various positions, with the exception of permanent overhead mounting.Long-lasting: A service life of up to 10 years in the design life.High performance for cyclic applicationsThe 6FM40X delivers reliable power in repeated discharge cycles. With a capacity of 40 Ah at a 10-hour discharge rate, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which utilises lead-calcium-tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM System the 6FM40X is completely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The housing is made of robust ABS plastic that is impact- and break-resistant and is also available on request in a flame-retardant version (UL94:V0). The low self-discharge rate of approximately 3% per month enables long-term storage while maintaining high operational readiness.Features ModelVision 6FM40X Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)40 (at a 10-hour rate) Max. discharge current400 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)13.5 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL FAQs on the Vision 6FM40X lead-acid batteryFor which applications is the 6FM40X best suited?This battery has been specially developed for cyclic applications in which the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs and golf buggies, as well as for use in solar installations, telecommunications systems and mobile measuring devices. Furthermore, the battery has VdS approval, making it ideal for safety-critical applications such as fire and burglar alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specifically designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 40 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging and 14.4 V to 14.7 V for boost charging. An excessively high charging current can shorten the battery’s service life.How long does the 6FM40X battery last?The battery has a design life of up to 10 years at 20 °C. However, the actual service life depends heavily on the specific operating conditions, the depth of discharge and the ambient temperature.
Vision lead-acid battery 6FM65X with 12V and 65Ah
The Vision 6FM65X is a robust, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 65 ampere-hours. It is specially designed for demanding standby and cyclic applications and offers an outstanding service life of up to 10 years in design life. Thanks to the AGM technology (Absorbent Glass Mat), this battery is completely maintenance-free, leak-proof and ensures a reliable and long-lasting power supply for critical systems.Highlights at a glanceLong service life: A service life of up to 10 years in design life for long-lasting reliability.VdS approved: G 107005 for safety-related applicationsHigh capacity: 65 Ah at 12 V for a long-lasting and stable power supply.Maintenance-free: Thanks to leak-proof AGM technology with over 99 % gas recombination.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C, which allows for long-term storage.Flexible installation: Operation is possible in various positions, with the exception of permanent overhead mounting.High current-carrying capacity: Ideally suited for short-term, high-power peaks.Powerful performance for versatile applicationsThe 6FM65X reliably supplies power for a variety of applications. With a capacity of 65 Ah at a 10-hour discharge rate, this battery is an excellent choice for emergency power systems, telecommunications systems and uninterruptible power supplies (UPS). Its robust construction using lead-calcium-tin alloys ensures high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM65X is completely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which allows for safe handling and operation in any position. The battery features self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The casing is made of robust ABS plastic that is impact- and break-resistant and is also available in a flame-retardant version (UL94:V0) upon request. The low self-discharge rate of approximately 3 % per month enables long-term storage while preserving high operational readiness.Features ModelVision 6FM65X Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)65 Max. discharge current650 A (for 5s) Charging voltage (float charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)22.6 ConnectionM6 thread FAQs on the VISION 6FM65X lead-acid batteryWhat applications is the 6FM65X best suited for?This battery is ideal for use in UPS systems, emergency lighting, security and alarm systems, as well as in telecommunications systems. Also for cyclic applications, such as in mobile devices or solar systems, it is a reliable energy source thanks to its robust design.What does the "10-year battery" mean?The addition "10-year battery" refers to the battery’s design life. This means that, under ideal conditions (float charge at 20 °C), the battery has a life expectancy of up to 10 years. The actual service life may vary depending on the individual operating conditions, such as depth of discharge and ambient temperature.Is the battery maintenance-free?Yes, thanks to AGM technology, the battery is completely maintenance-free. The electrolyte is bound in the mat, which means that topping up with water is not necessary.Can the battery be installed flexibly?Yes, the battery can be operated in any position. The exception is permanent overhead mounting, which should be avoided.What charging parameters apply to the battery?For float charging, we recommend a voltage of 13.6 V to 13.8 V. In cyclic operation, i.e. with regular charging and discharging, the charging voltage should be between 14.4 V and 14.7 V.
Vision Lead-acid battery CP1232 with 12V and 3.2Ah
The Vision CP1232 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 3.2 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology, this battery provides a safe and consistent power supply for a wide range of applications, particularly in security and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact power: 3.2 Ah capacity at 12 V for a reliable power supply with a small footprint.VdS approved: G 104100 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Reliable performance: Provides a stable voltage and low self-discharge.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-critical equipment.Powerful performance for versatile applicationsThe Vision CP1232 delivers a rated capacity of 3.2 Ah during a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its applications range from alarm systems and UPS systems to mobile medical devices, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, in which the electrolyte is completely bound within a glass fibre mat, the CP1232 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month allows for long-term storage whilst maintaining high operational readiness. The robust ABS plastic casing offers excellent protection against shocks and vibrations.Features ModelVision CP1232 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)3.2 (at a 20-hour rate) Maximum discharge current48A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1232 lead-acid batteryWhat applications is the CP1232 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applications Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. No top-up of distilled water is required and it is protected against leakage.What is the service life of the CP1232?The service life in standby mode (e.g. in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category ‘Standard Commercial’.Can this battery replace an old battery in my alarm system?Yes, the Vision CP1232 is a very common replacement battery for many alarm systems and emergency lighting systems. Before purchasing, please compare the voltage (12V), capacity (3.2Ah), dimensions and connector type (Faston 4.8 mm) with your old battery to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.96 A to maximise the battery’s service life.What does the Faston 187 connector type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply plugged onto these contacts, enabling quick and tool-free installation.
Vision Lead-acid battery CP1290F2 with 12V and 9Ah
The Vision CP1290F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 9 Ah capacity. This highly versatile and reliable general-purpose battery has been designed for long service life in standby operation as well as light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery provides safe and consistent power for a wide range of applications, from backup power in UPS systems to safety-critical alarm systems.Highlights at a glanceHigh capacity: 9 Ah at 12 V for reliable energy supply in standard applications.Long service life: Designed for a service life of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits most common installation spaces for batteries in this power class, often as an upgrade for 7Ah models.Flexible installation: Can be operated in any position, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for a variety of applicationsThe Vision CP1290F2 delivers a nominal capacity of 9 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications with occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is completely bound in a glass fibre mat, the CP1290F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month means it can be stored for a long time while remaining highly ready for use. The durable ABS plastic casing provides excellent protection against shocks and vibration.Features ModelVision CP1290F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)9 (at 20h rate) Maximum discharge current135A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1290F2 lead-acid batteryFor which applications is the CP1290F2 suitable?The battery is ideally suited for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical equipmentModel building and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is necessary and it is protected against leakage.Can I use this 9Ah battery as a replacement for a 7Ah battery?In many cases yes. The CP1290F2 often has the same dimensions as a standard 7Ah battery. If your device has enough space, you can use this battery as an upgrade for longer standby time. Please check the dimensions beforehand and make sure that your charger is suitable for the higher capacity.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1290F2 is a very common replacement battery. Please compare the voltage (12V), capacity (9Ah), dimensions, and especially the connector type (Faston 6.35 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Trickle charge (float): The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charging: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.7 A in order to maximise the battery's service life.What does the Faston 250 connector mean?Faston 250 refers to the type of connector. These are flat plug connectors with a width of 6.35 mm (0.250 inch). Cables with suitable cable lugs are simply plugged onto these contacts, allowing quick and tool-free installation.
Vision Lead-acid battery CP6120F1 with 6V and 12Ah
The Vision CP6120F1 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 6 volts and 12 Ah capacity. This extremely versatile and reliable all-purpose battery has been designed for prolonged service life in standby operation as well as for light cyclical requirements. Equipped with maintenance-free AGM technology, this battery delivers safe and consistent power for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a glanceHigh capacity: 12 Ah at 6 V for long-lasting power in compact applications.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common installation spaces for batteries in this performance class.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Tested quality: Manufactured according to the highest quality standards for consistently high reliability.Strong performance for versatile applicationsThe Vision CP6120F1 delivers a nominal capacity of 12 Ah on a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application extends from safety lighting and alarm systems to leisure applications requiring constant and fail-safe power supply.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely contained within a fibreglass mat, the CP6120F1 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3% per month allows long storage with high operational readiness. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Characteristics ModelVision CP6120F1 Battery typeVRLA AGM (standby / all-purpose) Nominal voltage (V)6 Capacity (Ah)12 (at 20h rate) Maximum discharge current130A (for 5 seconds) Charging voltage (trickle charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 50 x 100 Weight (kg)approx. 1.8 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP6120F1 lead-acid batteryWhich applications is the CP6120F1 suitable for?The battery is ideal for a wide range of standby and light cyclical applications:Safety lighting and emergency lighting systemsSafety and alarm technologyAutomatic feeders and agricultural equipmentElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP6120F1 batteries in series to achieve a voltage of 12 V. This is common practice for operating 12V devices. Please ensure that you always use two identical batteries (same model, same age) and connect them correctly.What is the service life of the CP6120F1?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 6.75 V and 6.9 V.Cycle charge: For occasional cyclical charging a voltage between 7.2 V and 7.5 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to maximise the life of the battery.What does the Faston 187 connection type mean?Faston 187 refers to the type of connection. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free assembly.
Vision 6FM80X lead-acid battery with 12V and 80Ah – Long-life 10-year standby battery
The Vision 6FM80X is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 80 Ah capacity, specially developed for long-term standby operation. Equipped with maintenance-free AGM technology and designed for 10 years of service life, this battery provides safe and durable emergency power for safety-critical and industrial applications. Whether in UPS systems or in safety technology, the 6FM80X meets the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20°C.High capacity: 80 Ah at 12 V for long-lasting energy supply in case of power failure.Maintenance-free: Completely sealed AGM technology with efficient gas recombination eliminates the need for topping up with water.High operational safety: Leak-proof design and a sturdy case ensure safe operation in any installation position.Low self-discharge: Enables long storage capability and ensures high operational readiness.Flexible installation: Operation possible in all positions, with the exception of permanent overhead use.Reliable performance for safety-critical applicationsThe Vision 6FM80X delivers a capacity of 80 Ah at 20-hour discharge (C20) and 74.4 Ah at 10-hour discharge (C10). Its design is optimised for parallel standby operation, in which it is constantly maintained at charging voltage to provide full power immediately in the event of a power failure. With low internal resistance and high short-circuit current tolerance, the battery is capable of delivering high currents even for demanding loads for a short period.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with electrolyte bound in glass fibre fleece (AGM system), the 6FM80X is completely maintenance-free and leak-proof. The battery is equipped with self-regulating safety valves which ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available as a flame-retardant version according to UL94:V0 if required and is thus ideally suited for use in safety-critical systems.Characteristics ModelVision 6FM80X Battery typeVRLA AGM (Standby) Nominal voltage (V)12 Capacity (Ah)80 (at 20h rate) Maximum discharge current800A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Maximum charging current24A Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 50 Design lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)350 x 167 x 179 Weight (kg)approx. 24.0 ConnectionM6 female thread CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision 6FM80X lead-acid batteryFor which applications is the 6FM80X suitable?The battery is ideal for standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and mobile base stationsMedical and clinical equipmentControl and automation technologyWhat exactly does "10-year battery" mean?The term "10 years" refers to the design life of the battery in standby parallel operation, also known as float operation, at a constant ambient temperature of 20°C. The actual service life achieved depends heavily on operating conditions such as ambient temperature, charging voltage and the frequency of discharges.What is the difference to a cyclic battery?A standby battery like the 6FM80X is optimised for long service life at constant float charge with infrequent discharges. A cyclic battery, on the other hand, is designed for frequent deep discharges and recharges, as is the case with solar installations or electric vehicles. Using a standby battery in a cyclic application would significantly shorten its lifespan.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely used in devices and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in all positions except permanently upside down. This enables flexible installation in a wide variety of devices and systems.
Vision Lead-acid battery CP672 with 6V and 7.2Ah
The Vision CP672 is a high-quality, valve-regulated lead-acid (VRLA) battery with 6 Volt nominal voltage and 7.2 Ah capacity. This highly versatile and reliable general-purpose battery is designed for a long service life in standby operation as well as for light cyclical demands. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power supply for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a glanceHigh capacity: 7.2 Ah at 6 V for a long-lasting power supply in compact applications.Long service life: Designed for a service life of up to 5 years in standby operation (Float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits in the most common installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured according to the highest quality standards for consistently high reliability.Powerful performance for versatile applicationsThe Vision CP672 provides a nominal capacity of 7.2 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation but is also suitable for applications with occasional charge and discharge cycles. Its scope of application ranges from security lighting and alarm systems to leisure applications where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP672 is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 on request.Features ModelVision CP672 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)7.2 (at 20h rate) Maximum discharge current108A (for 5 seconds) Charging voltage (float charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 34 x 100 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP672 lead-acid batteryFor which applications is the CP672 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Safety lighting and emergency lighting systemsSecurity and alarm technologyAutomatic feeders and agricultural equipmentElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP672 batteries in series to obtain a voltage of 12 V. This is common practice to operate 12V devices. Please always make sure to use two identical batteries (same model, same age) and to connect them correctly.What is the service life of the CP672?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 6.75 V and 6.9 V.Cyclic charge: For occasional cyclical charging, a voltage between 7.2 V and 7.5 V is recommended.Maximum charge current: Charge current should not exceed 2.16 A to maximise battery life.What does the Faston 187 terminal type mean?Faston 187 refers to the type of terminal. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply pushed onto these contacts, allowing quick and tool-free installation.
Vision Lead-acid battery CP12200X with 12V and 20Ah
The Vision CP12200X is a highly reliable, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 20 Ah, which has been specially developed for long-term standby operation in safety-critical systems. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this battery offers an extremely safe and durable emergency power supply. Whether in UPS systems, medical technology or alarm systems, the CP12200X fulfils the highest standards of quality and operational safety.Highlights at a glanceLong service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 20 Ah at 12 V for long-lasting power supply in an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.High operational reliability: Leak-proof design and a robust housing ensure safe operation.Low self-discharge: Enables a long shelf life and ensures high readiness for use.Flexible installation: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12200X provides a capacity of 20 Ah at a 20 hour discharge. Its design is optimised for standby parallel operation, where it is continuously kept at charging voltage in order to provide full performance immediately in the event of a power failure. With its low internal resistance, the battery is capable of supplying high currents for short periods, making it an ideal choice for demanding UPS systems and other safety-relevant systems.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in fibreglass fleece (AGM system), the CP12200X is absolutely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in case of overcharging. The low self-discharge of less than 3 % per month at 20 °C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame-retardant version according to UL94:V0 if required.Features ModelVision CP12200X Battery typeVRLA AGM (Long Life Standby) Nominal voltage (V)12 Capacity (Ah)20 (at 20h rate) Maximum discharge current300A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 6.0 ConnectionM5 screw terminal CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12200X lead-acid batteryFor which applications is the CP12200X suitable?The battery is ideally suited for demanding standby applications and emergency power supply:Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Telecommunications systems and IT infrastructureMedical and clinical devicesWhat does the long service life of up to 10 years mean?The indication "10 years" refers to the constructive service life (design life) of the battery in standby parallel operation, also called float operation, at a constant ambient temperature of 20°C. The actual service life achieved depends greatly on operating conditions such as ambient temperature, charging voltage and frequency of discharges.What is the difference compared to a standard 5-year battery?The CP12200X uses higher-quality materials and a more robust grid design than standard batteries. This results in less corrosion and wear during continuous charging, which enables the significantly longer service life in standby operation and increases the operational reliability of your systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimum maintenance of the battery.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water and it can be operated safely in equipment and indoors.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for a permanently overhead mounted position. This enables flexible installation in a wide variety of equipment and systems.
Vision Lead-acid battery CP6120F2 Faston 6.3mm 6 V 12 Ah
The Vision CP6120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 6 Volt nominal voltage and 12 Ah capacity. This highly versatile and reliable multi-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm connectors, this battery provides safe and consistent power supply for a wide range of applications, from emergency lighting to automatic feeders and children's toys.Highlights at a GlanceHigh capacity: 12 Ah at 6 V for long-lasting power in compact applications.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Completely sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits into the most common installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards for consistently high reliability. Strong Performance for Versatile ApplicationsThe Vision CP6120F2 delivers a nominal capacity of 12 Ah for a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is also suitable for applications with occasional charge-discharge cycles. Its fields of application range from emergency lighting and alarm systems to leisure applications where a constant and fail-safe power supply is essential.Robust Technology for Demanding EnvironmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP6120F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month ensures long shelf life and high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features ModelVision CP6120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)6 Capacity (Ah)12 (at 20h rate) Maximum discharge current130A (for 5 seconds) Charging voltage (float charge)6.75V - 6.9V Charging voltage (cyclic operation)7.2V - 7.5V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 50 x 100 Weight (kg)approx. 1.8 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP6120F2 Lead-Acid BatteryWhat applications is the CP6120F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Emergency lighting and emergency lighting systemsSecurity and alarm technologyAutomatic feeders and agricultural devicesElectric children's toysCamping and mobile lightingMedical devicesIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.Can I connect two of these batteries to a 12V system?Yes, you can connect two CP6120F2 batteries in series to obtain a voltage of 12 V. This is a common practice to operate 12 V devices. Please always ensure that you use two identical batteries (same model, same age) and connect them correctly.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connectors?The difference is in the width of the flat connector. The F2 connector, also called Faston 250, is 6.35 mm wide, while the F1 connector (Faston 187) is only 4.8 mm wide. The wider F2 connector can transmit higher currents better. Please check which connector type your device needs before purchasing.What charging parameters apply to this battery?Trickle charge (float): The recommended voltage is between 6.75 V and 6.9 V at 20 °C.Cyclic charge: For occasional cyclic charging, a voltage between 7.2 V and 7.5 V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to maximise the service life of the battery.What is the service life of the CP6120F2?The service life in standby operation (for example in an emergency light) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".
VISION lead-acid battery 6FM200DX with 12V and 200Ah
The Vision 6FM200DX is a cycle-resistant, valve-regulated lead battery (VRLA) with 12 volts nominal voltage and 200 ampere hours capacity. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery provides a reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems which require high cycle durability and deep discharges and is excellently suited for cyclical as well as standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.High capacity: 200 Ah at 12 V for long-lasting and stable power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C, which enables long-term storage.Flexible installation: Operation is possible in various positions, except permanent overhead installation.Durable: A service life of up to 10 years in design life.Strong performance for cyclical applicationsThe 6FM200DX reliably supplies power in recurring discharge cycles. With a capacity of 200 Ah in a 10-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which uses lead-calcium-tin alloys, enables high cycle durability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM200DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre fleece, which allows safe handling and operation in any position. The battery has self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge rate of about 3 % per month enables long-term storage with high operational readiness.Characteristics ModelVision 6FM200DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)200 (at 10h rate) Max. discharge current1000 A (for 5s) Charge voltage (float charge)13.6 V to 13.8 V Charge voltage (cycle operation)14.4 V to 14.7 V Operating temperature (°C)Charge: -10 ~ 60 / Discharge: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)522 x 238 x 218 Weight (kg)65 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM200DX lead batteryFor which applications is the 6FM200DX best suited?This battery has been specially developed for cyclical applications in which the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to cope with a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 200 Ah. Please observe the charging voltages recommended by the manufacturer: for float charging 13.6 V to 13.8 V and for cycle charging 14.4 V to 14.7 V. A charging current of over 60 A can shorten the battery's service life.How long does the 6FM200DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends heavily on the individual operating conditions, the depth of discharge and the ambient temperature. For example, more than 600 cycles can be achieved with 50 % depth of discharge.
Vision lead-acid battery 6FM150DX with 12V and 150Ah
The Vision 6FM150DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 150 ampere hours capacity. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle strength and deep discharges and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, which significantly extends the service life compared to conventional VRLA batteries.High capacity: 150 Ah at 12 V for long-lasting and stable power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only around 3 % capacity loss per month at 20 °C, which makes long-term storage possible.Flexible installation: Operation is possible in various positions, except for permanent overhead installation.Long service life: A service life of up to 10 years in design life.Strong performance for cyclic applicationsThe 6FM150DX reliably provides power in recurring discharge cycles. With a capacity of 150 Ah at a 10-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy demand. Its special construction, which uses lead-calcium-tin alloys, enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM150DX is completely maintenance-free and leak-proof. The electrolyte is safely bound in a glass fibre mat, which allows safe handling and operation in any position. The battery is equipped with self-sealing low-pressure relief valves that ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of around 3 % per month enables long-term storage with high operational readiness.Characteristics ModelVision 6FM150DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)150 (at 10h rate) Max. discharge current1000 A (for 5s) Charging voltage (float charging)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)485 x 172 x 240 Weight (kg)47 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM150DX lead-acid batteryFor which applications is the 6FM150DX best suited?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as the main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger that is suitable for AGM batteries with a capacity of 150 Ah. Please observe the charging voltages recommended by the manufacturer: for float charge operation 13.6 V to 13.8 V and for cycle charge operation 14.4 V to 14.7 V.How long does the 6FM150DX battery last?The service life of the battery is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, depth of discharge and ambient temperature. For example, over 650 cycles can be achieved when used with 50 % depth of discharge.
Vision lead-acid battery 6FM134DX with 12V and 134Ah
The Vision 6FM134DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 134 ampere hours. It is specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideal for cyclical as well as standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charging and discharging cycles, which considerably extends the service life compared to conventional VRLA batteries.High capacity: 134 Ah at 12 V for long-lasting and stable energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C, which enables long-term storage.Flexible installation: Operation is possible in various positions, except for permanent overhead installation.Long service life: A service life of up to 10 years in Design Life.Strong performance for cyclical applicationsThe 6FM134DX reliably delivers power in recurring discharge cycles. With a capacity of 134 Ah at a 20-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy needs. Its special design, which uses lead-calcium-tin alloys, enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM134DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery has self-closing low-pressure relief valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) upon request. The low self-discharge of about 3 % per month enables long-term storage with high readiness for use.Characteristics ModelVision 6FM134DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)134 (at 20h rate) Max. discharge current950 A (for 5s) Charge voltage (float charge)13.6 V to 13.8 V Charge voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharge: -20 ~ 60 Service lifeup to 10 years (according to Design Life) Dimensions (L/W/H, mm)341 x 173 x 283 Weight (kg)40.0 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM134DX lead-acid batteryFor which applications is the 6FM134DX best suited?This battery was specially developed for cyclical applications where the battery is regularly discharged and recharged. It is ideal as the main power supply for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunication systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend the use of a charger suitable for AGM batteries with a capacity of 134 Ah. Observe the charging voltages recommended by the manufacturer: for buffer charging (float operation) 13.6 V to 13.8 V and for cycle charging (boost operation) 14.4 V to 14.7 V. A charging current of more than 40 A can shorten the battery's service life.How long does the 6FM134DX battery last?The expected service life of the battery is up to 10 years at 20 °C in Design Life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature. For example, over 650 cycles can be achieved when used at 50% depth of discharge.
VISION lead-acid battery 6FM120DX with 12V and 120Ah
The Vision 6FM120DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with 12 volts nominal voltage and 120 ampere hours capacity. It is specially designed for demanding applications with recurring charging and discharging cycles. Equipped with the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideal for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Designed for a high number of charge and discharge cycles, significantly extending the life compared to conventional VRLA batteries.High capacity: 120 Ah at 12 V for a long-lasting and stable power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3% capacity loss per month at 20°C, which allows long-term storage.Flexible installation: Operation is possible in different positions, except for permanent overhead mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM120DX reliably delivers power in recurring discharge cycles. With a capacity of 120 Ah at a 10-hour discharge, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special construction, which utilises lead calcium tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM120DX is absolutely maintenance-free and leak-proof. The electrolyte is securely bound in a glass fibre mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure relief valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is optionally also available in a flame-retardant version (UL94:V0). The low self-discharge rate of about 3% per month allows long-term storage while maintaining high readiness for use.Features ModelVision 6FM120DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)120 (at 10h rate) Max. discharge current950 A (for 5s) Charging voltage (float charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (as per design life) Dimensions (L/W/H, mm)410 x 176 x 227 Weight (kg)38.0 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM120DX Lead Battery For which applications is the 6FM120DX best suited?This battery was specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power source for electric vehicles such as wheelchairs, cleaning machines, golf caddies and for use in solar systems, telecommunications systems, UPS systems and medical devices.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or lifespan. This distinguishes it from conventional lead-acid batteries, which are designed more for standby operation.How do I charge the battery correctly?We recommend using a charger that is designed for AGM batteries with a capacity of 120 Ah. Pay attention to the charging voltages recommended by the manufacturer: for buffer charging (float mode) 13.6 V to 13.8 V and for cyclic charging (boost mode) 14.4 V to 14.7 V. A charging current higher than 36 A can shorten the battery's lifespan.How long does the 6FM120DX battery last?The expected lifespan of the battery is up to 10 years at 20°C in design life. However, the actual service life depends heavily on individual operating conditions, depth of discharge, and ambient temperature. For example, with 50% depth of discharge, more than 650 cycles can be achieved.
Vision lead-acid battery 6FM100DX with 12V and 100Ah
The Vision 6FM100DX is a cycle-resistant, valve-regulated lead-acid battery (VRLA) with 12 volt nominal voltage and 100 Ah capacity. It is specially optimised for recurring charge and discharge cycles. Equipped with the AGM technology (Absorbent Glass Mat), this battery provides a reliable, leak-proof and long-lasting power supply. It is ideal for applications requiring high cycle resistance, deep discharges and a long service life.Highlights at a glanceCycle-resistant: Designed for a long cycle life to withstand repeated charging and discharging.High capacity: 100 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only about 3% per month at 20 °C, enabling a long storage period.Flexible installation: Operation is possible in various positions, except for permanent overhead mounting.Durable: Up to 10 years service life in design life.Powerful performance for cyclic applicationsThe 6FM100DX reliably supplies power in recurring discharge cycles. With a capacity of 100 Ah at a 10-hour discharge (up to 1.8 V/cell), this battery is an excellent choice for mobile and cyclic energy needs. Its special construction allows a high load capacity, making it ideal for applications with variable current requirements.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM100DX is absolutely maintenance-free and leak-proof. The electrolyte is securely contained in a fibreglass mat, which enables safe handling and operation in any position. The battery features self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is also available in a flame-retardant version (UL94:V0) upon request.Properties ModelVision 6FM100DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)100 (at 10h rate) Max. discharge current900 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)330 x 171 x 215 Weight (kg)32.0 ConnectionM8 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM100DX lead-acid batteryFor which applications is the 6FM100DX best suited?This battery was specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as golf caddies, wheelchairs, cleaning machines, as well as for solar installations, medical equipment and telecommunications systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to handle a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 100 Ah. Observe the manufacturer-recommended charging voltages: for float charging (standby operation) approx. 13.6 V to 13.8 V and for cycle charging (boost operation) approx. 14.4 V to 14.7 V. Too high a charging current can shorten the life of the battery.How long does the 6FM100DX battery last?The expected service life of the battery is up to 10 years at 20 °C in design life. However, the actual service life depends heavily on individual operating conditions, depth of discharge and temperature. With 50% depth of discharge, for example, over 650 cycles can be achieved.
Vision Lead-acid battery 6FM75TDX Cyclic with 12V and 75Ah
The Vision 6FM75TDX is a high-performance, cycle-proof and valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 75 Ah capacity. Designed for demanding cyclic applications, this battery combines maintenance-free AGM technology with a robust design. It offers a reliable and long-lasting energy solution for applications where repeated charging and discharging is a daily occurrence, such as in solar technology, mobile applications or rehabilitation technology.Highlights at a glanceHigh cycle stability: Developed for demanding cyclic use with a long service life.Strong capacity: 75 Ah at 12 V for long-lasting and reliable power supply.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after longer periods of disuse.Flexible installation: Operation is possible in all positions, with the exception of continuous upside-down use.Robust construction: The durable ABS plastic housing reliably protects the battery against mechanical impact.Reliable energy for demanding cyclesThe Vision 6FM75TDX has been specially optimised for cyclic operation. It delivers a nominal capacity of 75 Ah on a 20-hour discharge (C20). Its particular strength lies in its ability to be repeatedly deeply discharged and recharged without significant loss of capacity. This makes it the ideal choice for solar installations, electric vehicles and other mobile power supplies that require constant and reliable performance.Advanced technology for maximum longevityThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, where the electrolyte is contained in a glass fibre mat, the 6FM75TDX is fully sealed and maintenance-free. This not only prevents leaks, but also enables efficient gas recombination within the cell. The battery features low internal resistance, allowing high current draw. The low self-discharge rate ensures that the stored energy is preserved for long periods, which is particularly advantageous for seasonally used equipment.Features ModelVision 6FM75TDX Cyclic Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)75 (at 20h rate) Maximum discharge current750A (for 5 seconds) Charge voltage (float)13.6V - 13.8V Charge voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 600 cycles at 80% depth of discharge Dimensions (L/W/H, mm)260 x 168 x 214 Weight (kg)approx. 23.5 ConnectionM6 internal thread CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision 6FM75TDX lead-acid batteryFor which applications is the Vision 6FM75TDX suitable?This battery is specially designed for cyclic applications and is excellently suited for:Solar and photovoltaic off-grid systemsMotorhomes, caravans and boatsElectric wheelchairs and mobility scootersCleaning machines and automated guided vehicles (AGVs)Uninterruptible power supplies (UPS) with high cycle requirementsWhat does the term "cycle-proof" mean?Cycle-proof means that the battery is designed to be frequently and deeply discharged and then fully recharged. Unlike a conventional starter battery, which is designed for short, high current surges, a cycle-proof battery retains its capacity over many of these charge and discharge cycles.Is the battery completely maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.How should the battery be charged to maximise its service life?For maximum service life, we recommend using a good quality charger with an IUoU charging profile suitable for AGM batteries. The charging voltage should be between 14.4 V and 15.0 V in cyclic operation at 20 °C. The maximum charging current should not exceed 22.5 A.Can I connect several of these batteries together?Yes, you can connect several Vision 6FM75TDX batteries in series to increase the voltage (e.g. two for a 24 V system), or in parallel to increase the capacity. Please ensure that you only connect batteries of the same type, age and state of charge.What storage conditions and temperature ranges apply?Charging: 0 °C to +40 °CDischarging: −20 °C to +50 °CStorage (fully charged): −20 °C to +40 °CAlways store the battery fully charged in a cool, dry place. Due to the low self-discharge rate, recharging is only required every six months during longer storage.
Vision lead-acid battery 6FM55DX with 12V and 55Ah
The Vision 6FM55DX is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 55 ampere hours. It has been specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and long-lasting power supply. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideal for cyclical as well as standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charging and discharging cycles.High capacity: 55 Ah at 12 V for a long-lasting power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in different positions, except for permanent overhead installation.Long service life: A service life of up to 10 years in the design life.High performance for cyclical applicationsThe 6FM55DX reliably supplies power in recurring discharge cycles. With its capacity of 55 Ah, this battery is an excellent choice for mobile applications and systems with high energy requirements. Its special design, which utilises lead-calcium-tin alloys, enables high cycle stability and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system the 6FM55DX is absolutely maintenance-free and leak-proof. The electrolyte is securely bound in glass fibre fleece, ensuring safe handling and operation in any position. The battery has self-sealing low pressure relief valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is impact and break-resistant and, if required, is also available in a flame-retardant version (UL94:V0). The low self-discharge rate of about 3 % per month enables long-term storage with high operational readiness.Characteristics ModelVision 6FM55DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)55 ConnectionM6 screw terminal Dimensions (L/W/H, mm)239 x 132 x 205 Weight (kg)18 Operating temperature range (°C)-20 to +60 Service lifeup to 10 years (according to design life) FAQs on the VISION 6FM55DX lead-acid batteryFor which applications is the 6FM55DX best suited?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunication systems and mobile measuring instruments.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 55 Ah. Observe the charging voltages recommended by the manufacturer. Too high a charging current can shorten the battery's service life.How long does the 6FM55DX battery last?The service life of the battery is up to 10 years at 20 °C in the designed life. However, the actual service life depends strongly on the individual operating conditions, the depth of discharge and the ambient temperature.
Vision lead-acid battery 6FM50DX with 12V and 50Ah
The Vision 6FM50DX is a robust, cycle-resistant lead-acid battery (VRLA) with 12 volts nominal voltage and a capacity of 50 ampere-hours. It is specially designed for demanding applications with recurring charge and discharge cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers a reliable, leak-proof and durable power supply. It is the ideal solution for systems that require high cycle resistance and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle-resistant: Developed for a high number of charge and discharge cycles.High capacity: 50 Ah at 12 V (20-hour rate) for long-lasting energy supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent upside-down mounting.Durable: A service life of up to 10 years in design life.High performance for cyclic applicationsThe 6FM50DX reliably delivers power in recurring discharge cycles. Its capacity is 50 Ah at a 20-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high cycle resistance and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM50DX is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass-fibre mat, enabling safe handling and operation in any position. The battery is equipped with self-closing low-pressure relief valves to ensure pressure equalisation within the cells. The housing is made of robust ABS plastic, which is impact and break-resistant and is also available in a flame-retardant version (UL94:V0) on request. The low self-discharge of about 3% per month enables long-term storage while maintaining a high level of operational readiness.Features ModelVision 6FM50DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)50 (at 20h rate) Max. Discharge current450 A (for 5s) Charging voltage (trickle charge)13.6 V to 13.8 V Charging voltage (cyclic operation)14.4 V to 14.7 V Operating temperature (°C)Charging: -10 ~ 60 / Discharging: -20 ~ 60 Service lifeup to 10 years (according to design life) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)14.6 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL FAQs about the VISION 6FM50DX lead-acid batteryWhat applications is the 6FM50DX best suited for?This battery has been specially developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunications systems and mobile measuring devices. The battery also holds VdS approval, making it ideal for safety-critical applications such as fire and intruder alarm systems.What does "cycle-resistant" mean?A cycle-resistant battery is specially designed to withstand a high number of charge and discharge cycles without significant loss of capacity or service life. This sets it apart from conventional lead-acid batteries, which are more suited for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 50 Ah. Observe the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging (standby mode) and 14.4 V to 14.7 V for cycle charging (boost mode). Excessive charging current can shorten the battery's service life..How long does the 6FM50DX battery last?The battery's life expectancy is up to 10 years at 20 °C in design life. However, the actual service life depends greatly on the individual operating conditions, the depth of discharge and the ambient temperature.
Vision Lead-acid battery CP12240DX Cyclic with 12V and 24Ah
The Vision CP12240DX is a high-performance, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 24 Ah. This battery has been specially developed for demanding cyclical applications where regular and deep discharge is the order of the day. Equipped with robust, maintenance-free AGM technology, it is the ideal energy source for mobile applications in rehabilitation technology, for electric vehicles or in the leisure sector.Highlights at a glanceHigh cycle stability: Developed for a long service life with repeated, deep discharge and recharging.High capacity: 24 Ah at 12 V for a long-lasting and reliable power supply for mobile consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High power density: Offers a lot of energy in a compact and widely used housing format.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: Enables longer shelf life without significant loss of capacity.High performance for cyclic applicationsThe Vision CP12240DX reliably delivers a capacity of 24 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it a high resistance to the stresses of constant charging and discharging. This makes it the perfect choice for electric wheelchairs, golf caddies, e-scooters and other electric vehicles where maximum cycling and reliability are important.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) in combination with the AGM system, in which the electrolyte is securely bound in a glass fibre fleece, the CP12240DX is completely sealed, leak-proof and vibration-resistant. The low internal resistance enables efficient energy output even at higher currents. The housing made of robust ABS plastic reliably protects the internal components from mechanical stress in everyday mobile use and ensures a long and safe service life.Battery features ModelVision CP12240DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 2000 cycles at 30% depth of discharge Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 7.8 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12240DX lead-acid batteryWhat applications is the CP12240DX suitable for?The battery is ideal for a variety of demanding cyclic applications:Electric wheelchairs, mobility scooters and scootersGolf caddies and other light electric vehiclesMedical devices such as patient liftsMobile cleaning machinesMarine and camping applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage in any position.What is the difference to a standard AGM battery?The CP12240DX is designed as a cycle-proof battery. It uses reinforced lead plates and special additives that make it more resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby operation (e.g. in UPS systems) and would lose capacity more quickly during cyclical use.Can the battery be installed flexibly?Yes, the battery can be operated in all positions with the exception of a permanently upside down position. This enables flexible installation in a wide range of devices and vehicles.What are the charging parameters for this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Float charge voltage (20 °C): approx. 13.5 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 7.2 A. The use of a suitable charger is crucial for a long service life.Can two of these batteries be connected to form a 24V system?Yes, you can easily connect two CP12240DX batteries in series to create a 24V system. This is a very common configuration in electric wheelchairs and scooters. Please always use two new, identical batteries for this.
Vision Lead-acid battery CP12180DX Cyclic with 12V and 18Ah
The Vision CP12180DX is a high-performance, cycle-proof and valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 18 Ah capacity. This battery has been specially developed for demanding cyclic use, where regular and deep discharge is the norm. Equipped with sturdy, maintenance-free AGM technology, it is the ideal energy source for mobile applications in rehabilitation technology, for electric vehicles or for leisure use.Highlights at a GlanceHigh cycle stability: Designed for a long service life during repeated, deep discharge and recharging.Strong capacity: 18 Ah at 12 V for enduring and reliable energy supply for mobile consumers.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures a leak-proof and maintenance-free operation.High power density: Offers a lot of energy in a compact and widely used housing format.Flexible mounting: Operation possible in all positions, except for permanent upside-down use.Low self-discharge: Enables longer shelf life with no significant capacity loss. Strong Performance for Cyclical ApplicationsThe Vision CP12180DX reliably delivers a capacity of 18 Ah with a 20-hour discharge. Its construction is specifically designed for cyclic operation, which gives it high resistance to the stresses of constant charging and discharging. This makes it the perfect choice for electric wheelchairs, golf caddies, e-scooters and other electric vehicles where maximum cycle life and reliability are important.Robust Technology for Demanding EnvironmentsThanks to the VRLA technology (Valve Regulated Lead Acid) in conjunction with the AGM system, where the electrolyte is safely held in a glass fibre mat, the CP12180DX is fully sealed, leak-proof and vibration-resistant. The low internal resistance allows efficient energy delivery even at higher currents. The housing made from robust ABS plastic reliably protects the internal components from mechanical loads in daily mobile use and ensures a long, safe service life.Properties ModelVision CP12180DX Cyclic Battery typeVRLA AGM (cycle-proof) Nominal voltage (V)12 Capacity (Ah)18 (at 20h rate) Maximum discharge current270A (for 5 seconds) Charging voltage (float charging)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 1800 cycles at 30% depth of discharge Dimensions (L/W/H, mm)181 x 77 x 167 Weight (kg)approx. 5.5 ConnectionM5 screw terminal CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12180DX Lead-Acid BatteryFor which applications is the CP12180DX suitable?The battery is ideally suited for a wide variety of demanding cyclic applications:Electric wheelchairs, mobility scooters and scootersGolf caddies and other lightweight electric vehiclesMedical devices such as patient liftsMobile cleaning machinesApplications in marine and camping areasIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference to a standard AGM battery?The CP12180DX is designed as a cycle-proof battery. It uses reinforced lead plates and special additives, which make it more resistant to the stresses of deep discharges. A standard AGM battery is usually optimised for standby use (e.g. in UPS systems) and would lose capacity more quickly with cyclic use.Can the battery be installed flexibly?Yes, the battery can be operated in all positions, except for permanent upside-down mounting. This enables flexible installation in a wide variety of devices and vehicles.What charging parameters apply to this battery?Cyclic charging voltage (20 °C): approx. 14.4 V to 15.0 V.Float charge voltage (20 °C): approx. 13.5 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 5.4 A. Using a suitable charger is crucial for a long service life.Can two of these batteries be connected to form a 24V system?Yes, you can easily connect two CP12180DX batteries in series to create a 24V system. This is a very common configuration in electric wheelchairs and mobility scooters. Please always use two new, identical batteries for this purpose.
Vision Lead-acid battery CP12120D Cyclic with 12V and 12Ah
The Vision CP12120D is a high-quality, cycle-resistant and valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This battery has been specially developed for demanding cyclic applications and combines a robust design with reliable and maintenance-free AGM technology. It is the ideal energy source for applications that require regular and deep discharge, such as in rehabilitation technology, e-scooters or mobile leisure activities.Highlights at a glanceHigh cycle stability: Designed for a long service life with up to 1600 cycles at 30% depth of discharge.Compact energy: Provides 12 Ah capacity at 12 V in a handy and widely used case format.Maintenance-free AGM technology: The advanced AGM (Absorbent Glass Mat) technology ensures leak-proof and maintenance-free operation.High current carrying capacity: Suitable for consumers with short-term high starting current.Flexible mounting: Operation is possible in all positions, with the exception of permanent overhead use.Low self-discharge: With only about 3% self-discharge per month, the battery is ready for use even after extended periods of non-use.High performance for cyclic applicationsThe CP12120D reliably delivers 12 Ah with a 20-hour discharge (C20). Its strength lies in its high cycle resistance, making it suitable for repeated use. It was designed to ensure stable performance and fast rechargeability even after deep discharges. This makes it the perfect choice for electric vehicles, medical equipment and other mobile applications where reliability is paramount.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) combined with the AGM system, where the electrolyte is safely held in a glass fibre mat, the CP12120D is fully sealed and maintenance-free. This not only prevents acid from leaking, but also ensures high vibration resistance. The low internal resistance of about 18 mΩ enables efficient energy discharge. The case made of robust ABS plastic reliably protects the internal components from mechanical stresses during daily use.Features ModelVision CP12120D Cyclic Battery typeVRLA AGM (Cycle-resistant) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.6V - 13.8V Charging voltage (cyclic operation)14.5V - 14.9V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeapprox. 1600 cycles at 30% depth of discharge Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.6 ConnectionFaston 6.3 mm CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12120D lead-acid batteryFor which applications is the CP12120D suitable?The battery is ideal for a variety of cyclic applications:Electric wheelchairs, scooters and other rehab technologyToys and children's electric vehiclesMobile lighting and sound systemsEcho sounders and power supply for fishing boatsCamping and leisure activities Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaks in any position.What is the service life of the CP12120D?Service life in cyclic operation is very high and depends on the depth of discharge. With regular discharging to 30%, for example, the battery can achieve up to 1600 cycles.Can the battery be flexibly installed?Yes, the battery can be operated in all positions, with the exception of permanent overhead installation. This enables flexible installation in various devices.What are the charging parameters for this battery?Cyclic charging voltage (20°C): about 14.5 V to 14.9 V.Float charge voltage (20°C): about 13.6 V to 13.8 V.Maximum charging current: The recommended maximum charging current is 3.6 A. Exceeding this may reduce the service life.Can I use this battery as a replacement for a standard lead-acid battery?Yes, in many cases this AGM battery can replace a conventional lead-acid or gel battery with the same specifications (voltage, capacity and dimensions) and often offers advantages such as higher cycle stability and absolute maintenance freedom.
Sonnenschein A412/50 A lead gel battery 12V 50Ah
The Sonnenschein A412/50 A is an absolutely maintenance-free lead-gel block battery that has been developed for the highest standards of operational safety and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 50 Ah, it is the ideal energy source for fail-safe emergency power supply in security technology, UPS systems and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free for the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant case for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum supply security for critical infrastructureThe Sonnenschein A412/50 A is the specialist for standby parallel operation (standby use), where immediate and reliable power supply in the event of a mains failure is crucial. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and safety lighting systems, fire detection and alarm systems, as well as power supply in hospitals and telecommunications systems.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to add water.Developed for longevity and reliabilityThe A400 series has been developed for maximum cost-effectiveness throughout its life cycle. The extremely long service life of 12 years or more significantly reduces the need for expensive and complex battery replacements in fixed installations. The high manufacturing quality and use of high-purity materials ensure consistent performance, thus contributing to the high operational reliability of the entire system. Features ModelSonnenschein A412/50 A ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)50 (C10) Design service life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)278 x 175 x 190 ConnectionStandard car post (SAE) Weight (kg)approx. 21.0 FAQs about the Sonnenschein A412/50 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology?The key advantage is the combination of absolute maintenance-free operation, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and provide very consistent performance over a long period of time, making them a premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (mostly 20°C ambient temperature and correct maintenance charging).What is the difference between a standby battery and a starter or solar battery?A standby battery like this one is optimised for standby parallel operation. It is permanently kept at a constant voltage (maintenance charge) and rarely has to deliver energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily deep discharge and recharge.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any dealer who sells new batteries, or to municipal recycling centres, to ensure proper recycling.
Sonnenschein GF 12 051 Y 2 - 12 V 51 Ah gel battery with bottom rail
The Sonnenschein GF 12 051 Y 2 is a maintenance-free gel battery from the GF-Y series (dryfit® A500 cyclic). It was specially developed for the leisure and rehabilitation sector and offers a reliable power supply for mobile applications such as golf caddies, electric and hybrid boats, electric wheelchairs and scooters. With 51 Ah (C5) and 56 Ah (C20), the battery impresses with its robustness, long service life and high safetyHighlights at a glance12 V block battery with 51 Ah (C5) and 56 Ah (C20) (C20)Maintenance-free thanks to VRLA gel technology (no need to refill with water)Up to 450 charge cycles according to IEC 254-1 at 75% depth of dischargeDeep discharge-proof, robust and reliableWith bottom rail for additional stability and safe installation100% recyclable, environmentally friendly technologyPowerful for mobile applicationsThe GF 12 051 Y 2 is ideally suited for use in golf caddies, wheelchairs, electric and hybrid boats as well as scooters. Thanks to its high cycle stability, it is a particularly durable solution for repeated charging and discharging processes.Efficiency through gel technologyThe dryfit® gel technology makes the battery completely maintenance-free. Refilling with water is not required. Due to the low self-discharge, the battery remains reliably ready for use even after prolonged storage.Robust design for long service lifeThe GF 12 051 Y 2 is distinguished by a long service life, made possible by up to 450 charging cycles in accordance with IEC 254-1 and a resilient design. An integrated base rail increases stability, especially when used in mobile applications. Features ModelSonnenschein GF 12 051 Y 2 Battery typeVRLA lead-gel (traction battery) Nominal voltage (V)12 Capacity (Ah)51 (at 5h rate) Cycle lifeapprox. 700 cycles (according to IEC 60254-1) Charging voltage (cyclic operation)14.1V - 14.4V MaintenanceMaintenance-free (dryfit gel) Self-dischargeVery low Dimensions (L/W/H, mm)242 x 175 x 190 Weight (kg)approx. 20.5 ConnectionAutopole (conical) Base railB13 StandardsIEC 60254-1 FAQs on the Sonnenschein GF 12 051 Y 2 lead-gel batteryFor which applications is the GF 12 051 Y 2 suitable?It is ideally suited for mobile electric applications such as wheelchairs, e-scooters, golf caddies, electric boats, cleaning and lifting machines – typically in the leisure and rehabilitation sector.How big is the battery, how much does it weigh, and how is it connected?The battery measures 278 × 175 × 190 mm, weighs approx. 20.8 kg and is equipped with an A-terminal (Autopole, positive pole on the right).What is the service life of the battery?The battery achieves up to 450 charging cycles according to IEC 254-1 at 75% depth of discharge.Can the battery be deep discharged?Yes, the battery is deep discharge-proof and reliable even with repeated cycles.What special features does the dryfit® gel technology offer?It guarantees maintenance freedom (no refilling necessary), low gas emission and leak-proof, long shelf life with very low self-discharge as well as robustness and high cycle tolerance.
Sonnenschein GF 12 040 Y lead-gel battery 12V 40Ah
The Sonnenschein GF 12 040 Y is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on cycle stability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® gel technology, this battery offers an exceptional service life and robustness. With a nominal voltage of 12V and a capacity of 40 Ah (C5), it is the ideal energy source for daily, demanding use in electric wheelchairs, scooters and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for demanding, daily charging and discharging operation (approx. 450 cycles in accordance with IEC 60254-1).Robust performance: High energy density in a standard car battery design.Deep discharge proof: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for tough everyday use in mobile applications.Maximum performance for rehab and leisure applicationsThe Sonnenschein GF 12 040 Y is the specialist for mobile, electrically powered vehicles in the rehabilitation and leisure sector. Its main areas of application are electric wheelchairs, scooters for seniors, golf caddies, mobile lifting systems and electric boats. Wherever vehicles need to work reliably and maintenance-free on a daily basis, this battery provides the necessary energy and endurance.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and installable in any position, but also ensures excellent cycle stability and very low self-discharge. In contrast to conventional wet batteries, acid stratification is prevented, which considerably extends the service life in hard cycling operation.Developed for durability and cost-effectivenessThe GF-Y series was developed for maximum cost-effectiveness and minimal downtime in professional use. The high cycle life reduces the need for premature replacement and thus lowers the total operating costs (TCO) of your devices. The absolute maintenance-free operation eliminates the time and cost required for regular topping up with water and ensures the highest level of occupational safety. Features ModelSonnenschein GF 12 040 Y ApplicationTraction / drive TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)40 (C5) / 44 (C20) Cycle lifeapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)197 x 165 x 170 ConnectionM6 internal thread Weight (kg)approx. 14.0 FAQs about the Sonnenschein GF 12 040 Y lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specifically designed to supply electric motors with energy over a longer period of time. It is extremely cycle-resistant, i.e. it can regularly be deeply discharged and recharged, which is the case in the daily use of, for example, electric wheelchairs. This distinguishes it from a starter battery.What is the main advantage of Dryfit® gel technology in mobile applications?The main advantage is the absolute maintenance-free operation. With mobile devices, the time-consuming and error-prone checking and topping up of water is not required. In addition, these batteries are leak-proof, even when tilted or exposed to severe vibrations, which significantly increases operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications, as high currents flow here. C20 (discharge over 20 hours) is a common comparison value, where the nominal capacity is higher.How should this lead battery be disposed of?Lead batteries contain environmentally hazardous substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper disposal.
Exide Marathon L6V110 lead-acid battery with 6V and 110Ah
The Exide Marathon L6V110 is a reliable lead-acid battery for industrial applications that require a safe and uninterrupted power supply. With its robust AGM technology, a long design life of over 12 years, and high high-current capability, it is ideal for telecommunications, power supply, and other safety-related systems.Highlights at a GlanceAGM technology with highly compressive glass-fibre separator for maximum operational safetyDesign life of over 12 years according to EUROBAT classification “Long Life”Extremely low gas emission due to 99% internal gas recombinationMaintenance-free over the entire service life (no need to top up water)Certified in accordance with IEC 60896-21/-22 and UL standardsMaximum Performance for Demanding ApplicationsThe Exide Marathon L6V110 lead-acid battery offers high power density in a compact design. Thanks to its strong high-current capability, it is perfectly suited for use in telecommunications systems, UPS systems, power supplies, emergency lighting, and photovoltaic applications. Its short charging time ensures rapid availability, while the optimised design allows space-saving installation.Efficiency Meets Long Service LifeWith a design life of more than 12 years in float charge operation, the Exide Marathon L6V110 offers a high level of operational reliability and cost-effectiveness. The combination of robust lead-calcium grid technology, low self-discharge, and high corrosion resistance makes the battery a long-lasting and sustainable solution for critical energy systems.AGM Technology for Maximum Safety and LongevityThe proven AGM technology with glass-fibre separator and lead-calcium grid plates ensures maximum corrosion resistance, reliability, and operational safety. The L6V110 meets IEC 60896-21/-22 standards, is UL certified and is also available in a flame-retardant housing version (UL 94-V0).Features ModelExide Marathon L6V110 Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)6 Capacity (Ah)110 (at 10h rate) Short-circuit current (A)2900 Charging voltage (float charge)6.81V (at 20°C) Charging voltage (boost charge)7.05V - 7.2V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)244 x 132 x 275 Weight (kg)approx. 20.0 ConnectionM8 screw connection CertificationsISO 9001, ISO 14001, UL FAQs on the Exide Marathon L6V110For which applications is the Exide Marathon L6V110 suitable?The battery is ideal for telecommunications, UPS systems, emergency lighting, photovoltaic storage as well as power supply and railway technology.How long is the service life of the Exide Marathon L6V110?The Exide Marathon L6V110 offers a design life of at least 12 years in standby operation (EUROBAT: Long Life).Is the Exide Marathon L6V110 maintenance-free?Yes, the battery is completely maintenance-free. There is no need to top up water.Can the Exide Marathon L6V110 be transported?Yes, the battery is not subject to any transport restrictions, whether by rail, road, water, or air (IATA, DGR A67).Is the Exide Marathon L6V110 recyclable?Yes, the battery is 100% recyclable and therefore particularly environmentally friendly.
Yuasa Lead-acid battery with 12V and 86Ah - SWL2250FR
The Yuasa SWL2250FR impresses with its high power density, 86 Ah capacity and reliable performance for industrial applications. It is the ideal solution for systems that rely on a secure energy supply and maximum operational safety.Highlights at a glanceHigh Performance: EUROBAT "High Performance Commercial" for up to 12 years of use.High power output: Delivers 2250 watts during a 10-minute discharge to 9.6 V.Flexible installation: Can be installed in almost any position.High safety: With low-pressure relief valves for safe operation.Powerful performance for challenging applicationsThe Yuasa SWL2250FR is part of the proven SWL series of valve-regulated lead-acid batteries (VRLA). It delivers an impressive 2250 watts with a 10-minute constant power discharge to 9.6 V, making it particularly suitable for UPS systems, safety lighting and telecommunications systems. With a maximum discharge current of 800 A for one second, the battery provides a reliable power supply even during sudden load peaks.Efficient energy and long service lifeThanks to its EUROBAT classification "High Performance Commercial", the SWL2250FR achieves a service life of up to 12 years at 20 °C. The low self-discharge rate of around 3% per month ensures high operational readiness even after long periods of inactivity. The robust ABS housing reliably protects the battery and is optionally available in a flame-retardant version (UL94:V0) to meet additional safety requirements.Technology for versatile applicationsThe SWL2250FR can be installed flexibly in almost any position, except for a permanently overhead mounted position. The battery has M8 internal thread connections, which ensure simple and secure connection. For cyclic operation, a maximum charging current of 19 A is recommended, while no limitation is required for float charging. Low-pressure relief valves ensure safe gas pressure regulation inside the cells and guarantee low-maintenance operation. The SWL2250FR meets numerous international standards and certifications, including ISO 9001, ISO 14001, OHSAS 18001 as well as IEC61056 and IEC60896-21/22. ModelYuasa SWL2250FR Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)86 (at 20h rate) Maximum discharge current1442 A (short-circuit current) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.5V (±3%) Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Storage temperature (°C)-20 ~ 50 Service lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)380 x 166 x 174 Weight (kg)28.4 ConnectionM8 thread CertificationsISO9001, ISO14001, ISO45001, UL FAQs about the Yuasa lead acid battery with 12V and 86AhWhat service life does the SWL2250FR offer?The SWL2250FR belongs to the EUROBAT class "High Performance Commercial" and offers an expected service life of up to 12 years at 20 °C.For which applications is the battery suitable?The SWL2250FR is particularly suitable for:Uninterruptible power supplies (UPS) Telecommunications systems Safety and emergency lighting Medical equipment Photovoltaic systems Fire alarm and security systemsCan the battery be flexibly installed?Yes, the battery can be operated in almost any position, except permanently upside down.What safety features does the SWL2250FR offer?The battery features a robust housing, low-pressure relief valves for gas pressure regulation and the option of a flame-retardant housing (UL94:V0).What is the maximum discharge current?The SWL2250FR delivers up to 800 A for 1 second and up to 500 A for 1 minute, making it ideal for short-term high-current loads.How high is the self-discharge?The self-discharge rate is approx. 3% per month at 20 °C, ensuring the battery remains operational even after longer periods of inactivity.
Vision Lead-acid battery CP1229 with 12V and 2.9Ah
The Vision CP1229 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 2.9 Ah. This compact and reliable all-purpose battery is designed for long-term service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable power supply for a wide variety of applications, especially in safety and medical technology as well as in emergency lighting systems.Highlights at a glanceCompact energy: 2.9 Ah capacity at 12 V for reliable power supply with low space requirements.Long service life: Designed for a service life of up to 5 years in standby use (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Provides a stable voltage level and low self-discharge.Flexible installation: Operation is possible in all positions except for permanent overhead use.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devicesPowerful performance for versatile applicationsThe Vision CP1229 delivers a nominal capacity of 2.9 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its field of application ranges from alarm systems and UPS systems to mobile medical devices where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1229 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of under 3% per month allows for long storage periods with high readiness. The sturdy ABS plastic housing offers excellent protection against shocks and vibrations.Properties ModelVision CP1229 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.9 (at 20h rate) Maximum discharge current43.5A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)79 x 56 x 105 Weight (kg)approx. 1.2 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1229 lead-acid batteryFor which applications is the CP1229 suitable?The battery is ideal for a wide range of standby and light cyclical applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. It does not require topping up with distilled water and is protected against leakage.What is the service life of the CP1229?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1229 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.9Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycling charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.87 A in order to maximise battery life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables quick and tool-free installation.
Sonnenschein GF 12 033 YG2 - 12 V 32.5 Ah gel battery
The Sonnenschein GF 12 033 YG2 is a maintenance-free lead-gel battery of the proven GF-Y series (dryfit® A500 cyclic). With its high cycle stability, robust design and reliable energy output, it is ideal for use in leisure and rehabilitation applications. With 32.5 Ah (C5) and 38 Ah (C20), it ensures a constant energy supply in golf caddies, electric wheelchairs, hybrid and electric boats, and many other traction applications.Highlights at a glance12 V block battery with 32.5 Ah (C5) and 38 Ah (C20)Maintenance-free thanks to sealed VRLA gel technology (no need to top up with water)Up to 450 charging cycles according to IEC 60254-1Very low self-discharge and long shelf lifeRobust design for mobile usePowerful for mobile applicationsThe GF 12 033 YG2 is ideal for mobile applications such as golf caddies, electric and hybrid boats, rehab vehicles or scooters. Thanks to its compact design and high reliability, it is a safe energy supplier even during repeated charging and discharging operations.Efficiency through gel technologyThanks to the sealed design and dryfit® gel technology, the batteries are completely maintenance-free, as there is no need to top up with water. The low self-discharge ensures a high level of operational readiness even after long periods of non-use.Robust design for long service lifeWith up to 450 charging cycles, the GF 12 033 YG2 guarantees high safety and efficiency in operation. Its deep discharge protection ensures reliable performance even in demanding mobile applications. Battery features ModelSonnenschein GF 12 033 YG2 Battery typeVRLA lead-gel (traction battery) Rated voltage (V)12 Capacity (Ah)33 (at 5h rate) Cycle lifeapprox. 700 cycles (according to IEC 60254-1) Charging voltage (cycle operation)14.1V - 14.4V MaintenanceMaintenance-free (dryfit gel) Operating temperature (°C)-20 ~ 50 Self-dischargeVery low Dimensions (L/W/H, mm)197 x 132 x 180 Weight (kg)approx. 13.5 ConnectionAutopol (conical) StandardsIEC 60254-1 FAQs about the Sonnenschein GF 12 033 YG2 VRLA gel batteryWhat applications is the GF 12 033 YG2 gel battery suitable for?It is ideal for traction applications in the leisure and rehabilitation sector, e.g. for electric wheelchairs, e-scooters, golf caddies, cleaning and lifting platforms, and electric boats.Is the GF 12 033 YG2 maintenance-free?Yes, thanks to sealed VRLA gel technology (dryfit®), the battery is absolutely maintenance-free.What is the service life of the battery?The battery achieves up to 450 charging cycles according to IEC 60254-1.Can the battery be deep discharged?Yes, the GF 12 033 YG2 is deep discharge proof and reliable even in cyclic use.What are the advantages of dryfit® gel technology in terms of safety and maintenance?The technology is maintenance-free, leak-proof, very low in gas (internal recombination), deep discharge proof, rechargeable, fully recyclable and subject to no transport restrictions.
Sonnenschein SOLAR BLOCK SB12/75 A lead-gel battery 12V 75Ah
The Sonnenschein SB12/75 A is an absolutely maintenance-free premium-class lead-gel block battery developed for the most demanding cyclic applications in professional solar systems. As part of the globally proven SOLAR BLOCK series, it combines the proven Dryfit® gel technology with an extremely robust tubular plate design. With a nominal voltage of 12V and a capacity of 75 Ah (C100), it offers the highest cycle stability and reliability for self-sufficient energy systems.Highlights at a glanceSuperior tubular plate technology: Offers the highest cycle stability and longevity in demanding solar and traction applications.Dryfit® gel technology: Absolutely maintenance-free over the entire lifecycle, maximum reliability and leak-proof.Extremely long cycle life: Developed for thousands of charge and discharge cycles (approx. 1200 cycles at 60% DoD).Deep discharge safe: Excellent recovery even after repeated deep discharges and absolutely robust against acid stratification.Low self-discharge: Perfect for seasonal use and long periods of self-sufficiency.Maximum security of supply for self-sufficient systemsThe Sonnenschein SB12/75 A is the specialist for large and critical cyclic applications. Its main areas of use are medium off-grid solar systems for holiday homes, self-sufficient telecommunications stations, signal systems, and demanding marine applications. Wherever the battery is the only energy source and is deeply discharged daily, this battery offers maximum life and reliability.Proven Dryfit® gel and tubular plate technologyThe combination of Dryfit® gel and tubular plates (positively reinforced) is the key to this battery’s extreme robustness. The gel binds the electrolyte, prevents acid stratification, and makes the battery maintenance-free. The tubular plate construction protects the active mass from decay during deep discharge cycles, providing unrivalled durability compared to standard grid plate batteries.Developed for longevity and reliabilityThe SOLAR BLOCK series was designed for maximum cost-effectiveness throughout its life cycle. The extremely long cycle life significantly reduces the need for expensive and time-consuming battery changes and lowers the overall operating costs (TCO) of the system. The high manufacturing quality ensures consistent performance and maximum operational safety. Characteristics ModelSonnenschein SOLAR BLOCK SB12/75 A ApplicationSolar / cycle operation (Off-Grid) TechnologyLead gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)66 (C10) / 75 (C100) Cycle stabilityapprox. 1200 cycles (at 60% DOD) Dimensions (L x W x H in mm)330 x 171 x 236 ConnectionStandard car pole (SAE) Weight (kg)approx. 27.7 FAQs about the Sonnenschein SB12/75 A lead-gel batteryWhat is the difference between this SOLAR BLOCK (SB) and the SOLAR (S) series?The SOLAR BLOCK (SB) series (this model) uses a tubular plate construction. It is designed for an extremely high number of cycles (approx. 1200 cycles) and the toughest daily use in large off-grid systems. The SOLAR (S) series (e.g. S12/85 A) uses grid plates and is also very cycle-resistant (approx. 800 cycles), but the SB series offers even higher durability in high-performance cyclic operation.What is the main advantage of Dryfit® gel technology in solar operation?In cyclic solar operation, avoiding acid stratification is crucial. In gel batteries, the electrolyte is bound, preventing stratification and making the battery more resistant to deep discharges. This results in a significantly longer life than with AGM or wet batteries in this application.What do the capacity specifications C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, as slow discharges over several days are more common here. C10 (discharge over 10 hours) is relevant for faster discharging.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to local recycling facilities to ensure proper recycling.
Sonnenschein A406/165 A lead gel battery 6V 165Ah
The Sonnenschein A406/165 A is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a rated voltage of 6V and a capacity of 165 Ah, it is the ideal energy source for fail-safe emergency power supplies in telecommunications, industrial plants and safety-relevant systems.Highlights at a glanceSuperior Dryfit® Gel technology: Absolutely maintenance-free over the entire lifetime, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A406/165 A is the specialist for standby parallel operation (standby use), where immediate and reliable energy transfer is crucial in the event of a mains failure. Its main areas of application are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems, as well as power supply in power stations, substations and railway installations. Wherever a power failure would have serious consequences, this battery provides the necessary security.Proven Dryfit® Gel TechnologyThe Dryfit® Gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes the operation particularly safe and efficient, without the need to top up with water.Developed for longevity and reliabilityThe A400 series was developed for maximum cost-effectiveness over the entire service life. The extremely long service life of 12 years and more significantly reduces the need for expensive and laborious battery replacement in fixed installations. The high manufacturing quality and the use of high-purity materials ensure consistent performance and thus contribute to the high operational safety of the entire system. Features ModelSonnenschein A406/165 A ApplicationStandby / UPS / Safety lighting TechnologyLead-gel (dryfit®) Rated voltage (V)6 Capacity (Ah)165 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)244 x 190 x 275 ConnectionStandard Autopole (SAE) Weight (kg)approx. 32.0 FAQs about the Sonnenschein A406/165 A lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The crucial advantage is the combination of absolute maintenance-free operation, highest cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent performance over a long period, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct maintenance charging).What is the difference between a standby battery and a starter or solar battery?A standby battery like this one is optimised for standby parallel operation. It is permanently kept at a constant voltage (maintenance charge) and only rarely needs to supply energy. A starter battery is designed for short-term high currents. A solar battery (cycle battery) is optimised for daily, deep discharges and recharges.How must this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer selling new batteries or to municipal recycling centres free of charge to ensure proper disposal.
Yuasa RE12-12FR lead-acid battery with 12V and 12Ah
The Yuasa RE12-12FR lead-acid battery impresses with its 12 Ah capacity, compact dimensions, and robust construction for a wide range of industrial applications. It is ideal for systems that depend on reliable power supply where space is limited.Highlights at a glanceSolid service life: EUROBAT “General Purpose” for up to 9 years of use.High operational safety: Flame-retardant ABS housing (UL94:V0).Compact design: At only 98 mm high, ideal for tight installation conditions.Maintenance-free: VRLA technology for leak-proof operation.Powerful performance for challenging applicationsThe Yuasa RE12-12FR is a compact VRLA industrial battery that is ideal for applications such as emergency lighting, alarm systems, UPS systems, or telecommunications devices. With a capacity of 12 Ah at a 20-hour rate of discharge, it provides a stable energy supply even with recurring charge and discharge cycles. The maximum discharge current of up to 180 A for one second ensures power reserves for short load peaks.Efficient energy and long service lifeThe RE12-12FR is designed for a service life of up to 10 years and meets the EUROBAT classification “General Purpose” (6 to 9 years). Its low self-discharge of only about 3% per month guarantees a high readiness for use even after prolonged periods of inactivity. The flame-retardant ABS housing (UL94:V0) offers additional safety and reliably protects the battery from external influences.Technology for versatile applicationsThe Yuasa RE12-12FR can be installed flexibly in almost any position, except permanently upside down. Thanks to its compact dimensions (151 x 98 x 94 mm), it is particularly suitable for systems where space is limited. The Faston terminals (6.35 mm) allow for a fast and secure connection. The VRLA technology ensures low-maintenance operation, while low pressure relief valves reliably regulate the gas pressure within the cells. The RE12-12FR meets key international standards, including ISO 9001, and is certified by Underwriters Laboratories Inc. ModelYuasa RE12-12FR Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 1 second) Charging voltage (float charge)13.65V (±1%) Charging voltage (cycle use)14.5V (±3%) Operating temperature (°C)Charge: -15 ~ 45 / Discharge: -15 ~ 45 Storage temperature (°C)-15 ~ 45 Service lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)4.15 ConnectionFaston 6.3 CertificationsISO9001, UL FAQs for Yuasa RE12-12FR V0-case Lead 12V 12AhWhat is the expected service life of the RE12-12FR?The RE12-12FR belongs to the EUROBAT “General Purpose” class and offers an expected service life of up to 9 years, and up to 10 years under optimal conditions.For which applications is this battery suitable?The Yuasa RE12-12FR lead-acid battery is especially suitable for:Uninterruptible power supplies (UPS) Safety and emergency lighting systems Fire alarm and safety systems Medical devices Recreational vehicles such as motorhomes and boats Solar and wind power systemsCan the battery be installed flexibly?Yes, the battery can be installed in almost any position except permanently upside down.What safety features does the RE12-12FR offer?The battery features a flame-retardant housing, low pressure relief valves for regulating gas pressure, and maintenance-free VRLA technology for safe operation.How high is the self-discharge rate?The self-discharge rate is about 3% per month at 20 °C, which ensures the battery remains ready for use even after extended periods of downtime.What terminals does the battery have?The RE12-12FR is equipped with Faston terminals (6.35 mm) that enable simple and quick installation.
Yuasa Lead-acid battery with 12V and 25Ah - SWL750
The Yuasa SWL750 impresses with its high power density, compact dimensions and reliable performance for industrial applications. It is the ideal solution for systems that need to deliver high energy at short notice and at the same time rely on a long service life.Highlights at a glanceHigh Performance: EUROBAT "High Performance" for up to 12 years of use.High power output: Delivers 750 watts with a 10-minute discharge up to 9.6 V.Compact design: Space-saving with high energy density.Maintenance free: VRLA technology for leak-proof operation.Powerful performance for challenging applicationsThe Yuasa SWL750 is part of the proven SWL series of valve-regulated lead-acid batteries (VRLA). It delivers 750 watts with a 10-minute constant power discharge up to 9.6 V and is ideal for UPS systems, security lighting, telecommunication systems and other applications that require high power at short notice. Its maximum discharge current of 500 A for one second provides the necessary power reserves for sudden load peaks.Efficient energy and long service lifeThe SWL750 is designed for a service life of up to 10 years and fulfils the EUROBAT classification "High Performance" (10 to 12 years). The low self-discharge rate of around 3 % per month ensures that the battery remains ready for use even after long periods of non-use. The robust ABS housing protects the battery from external influences and is optionally available in a flame-retardant FR version (UL94:V0).Robust technology for industrial applicationsThe Yuasa SWL750 can be operated flexibly in almost any installation position, except permanently upside down. The M5 female threaded connections enable safe and easy installation. The recommended charging current for cyclic operation is a maximum of 11.45 A, while no limit is required for float charging. Low-pressure drain valves ensure safe gas pressure regulation within the cells and guarantee low-maintenance operation. The SWL750 fulfils numerous international standards and certifications, including ISO 9001, ISO 14001, OHSAS 18001 and the IEC standards IEC61056 and IEC60896-21/22. Battery modelYuasa SWL750 Battery typeVRLA AGM Rated voltage (V)12 Capacity (Ah)25 (at 20h rate) Maximum discharge current300A (for 1 second) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cycle operation)14.5V (±3%) Operating temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Storage temperature (°C)-20 ~ 50 Service lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)9.6 ConnectionM5 thread CertificationsISO9001, ISO14001, OHSAS18001, IEC 60896-21+22, UL FAQs about the Yuasa SWL750 lead-acid batteryWhat is the service life of the SWL750?The SWL750 belongs to the EUROBAT class "High Performance" and offers an expected service life of up to 12 years at 20 °C.For which applications is the battery suitable?The SWL750 is particularly suitable for:Uninterruptible power supplies (UPS) Safety and fire alarm systems Telecommunication systems Emergency lighting systemsCan the battery be installed flexibly?Yes, the battery can be installed and operated in any position up to 90 ° from the upright position, but not permanently upside down.What safety features does the SWL750 offer?The battery has a robust housing, low-pressure drain valves for gas pressure regulation and maintenance-free VRLA technology for safe operation.How high is the self-discharge?The self-discharge rate is approx. 3% per month at 20 °C, which means that the battery remains ready for use even during longer downtimes.What connections does the battery have?The SWL750 is equipped with M5 female threaded connections for safe and easy installation.
Vision Lead-acid battery CP1270F2 with 12V and 7Ah
The Vision CP1270F2 is a high-quality, valve-regulated lead-acid (VRLA) battery with 12 volts rated voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby mode as well as for light cyclic applications. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery offers a safe and consistent power supply for a wide range of applications, from emergency power supply in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for a reliable power supply in standard applications.VdS approved: G 103134 for safety-related applicationsLong service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits into the most common installation spaces for batteries in this power class.Flexible installation: Operation is possible in all positions, with the exception of continuous overhead use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-critical equipment. Powerful performance for versatile applicationsThe Vision CP1270F2 provides a rated capacity of 7 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications involving occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270F2 is completely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month allows for long storage life with high operational readiness. The robust ABS plastic housing offers excellent protection against shocks and vibrations.Features ModelVision CP1270F2 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs on the Vision CP1270F2 lead-acid batteryWhat applications is the CP1270F2 suitable for?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (FAS)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the difference between the F1 (4.8mm) and F2 (6.35mm) connection?The difference lies in the width of the flat plug connection. The F2 connection, also called Faston 250, is 6.35 mm wide, while the F1 connection (Faston 187) is only 4.8 mm wide. The wider F2 connection can transmit higher currents better and is often used in more powerful UPS systems. Please check before purchase which connection type your device requires.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270F2 is one of the most common replacement batteries. Please compare before purchase the voltage (12V), the capacity (7Ah), the dimensions and especially the connection type (Faston 6.35 mm) with your old battery to ensure compatibility.Which charging parameters apply to this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A in order to maximise the service life of the battery.What service life does the CP1270F2 have?The service life in standby mode (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".
Exide Marathon L12V24 - 12 V AGM lead-acid battery with 24 Ah
The Exide Marathon L12V24 is a compact, sealed VRLA-AGM block battery that supplies reliable energy for medium bridging times with 12 V and 23.5 Ah (C10) or 24.0 Ah (C20). Thanks to its long-life design (≥12 years, EUROBAT) and high power density, it is extremely low-gassing and maintenance-free, as it does not need to be topped up with water. This makes it ideal for use in UPS systems, telecommunications, safety lighting as well as energy and railway technology. A mounting kit (MTZ) is included in the scope of delivery.Highlights at a glance12 V / 24 Ah (C20), 23.5 Ah at C10, 15.8 Ah at C1Maintenance-free (AGM/VRLA), internal gas recombination ~99 %Design life: ≥12 years (EUROBAT "Long Life")High high-current capability for short discharge timesCompact & lightweight: 168 × 127 × 174 mm, approx. 9.5 kgReliable performance for critical UPS loadsThe L12V24 was designed for applications where stable voltage and high currents are crucial. Its robust high-current design, emphasised by a short-circuit current of 880 A and an internal resistance of 14.3 mΩ, makes it ideal for UPS systems, hazard alarm technology and starting and buffering tasks. Example values at 20 °C are 14.9 A at 1.80 V/cell for 1 hour or 39 A at 1.95 V/cell for 10 minutes.High energy density with minimal effortThe L12V24 combines high power density with fast recharge times thanks to AGM technology and an optimised grid alloy. Its low self-discharge reduces maintenance intervals and storage costs, and its maintenance-free design lowers operating costs over its entire service life.AGM-VRLA for maximum operational safetyThe electrolyte is bound in glass mat (AGM). The valve regulation allows internal gas recombination, which minimises gassing. Lead-calcium grid plates improve corrosion resistance. The product is not subject to transport restrictions (ready for operation according to IATA DGR A67) and is manufactured in Europe to ISO 9001. Variants with UL 94-V0 are available.Features ModelExide Marathon L12V24 Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)12 Capacity (Ah)24 (at 10h rate) Short-circuit current (A)1100 Charging voltage (float charge)13.62V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)165 x 125 x 175 Weight (kg)approx. 9.5 ConnectionM5 screw connection CertificationsISO 9001, ISO 14001, UL FAQs about the Exide Marathon L12V24 batteryWhat is the L12V24 particularly suitable for?The L12V24 is designed for UPS systems, telecommunications equipment, safety/emergency lighting, as well as general buffer and backup applications with medium bridging times.Do I need to top up with water or perform regular maintenance?No, the Exide Marathon L12V24 is sealed and maintenance-free; topping up with water is not necessary.What is the expected service life in standby operation?The battery is designed for a design life of 12 years and longer in accordance with EUROBAT "Long Life", depending on the environment and operating profile.Is the transport of the battery restricted?Ready-to-use VRLA AGM blocks like the L12V24 are not subject to any special transport restrictions in accordance with IATA DGR A67, so shipping by road, rail, sea or air is possible.Is there a flame-retardant version?Yes, the L12V24 is optionally available with UL 94-V0 housing. This increases the material's flame resistance for applications with increased fire protection requirements.Which connections are available and are accessories included?The block has M-M6 terminals; required mounting/connection components (MTZ) are included in the delivery.
Yuasa SWL1100 high-performance battery with 12 V
The Yuasa SWL1100 is a VRLA high-performance battery with 12 volts. It offers an output of 1100 watts per block over 10 minutes and a capacity of 39.6 Ah with a 10-hour discharge. This battery combines high short-term performance with a long service life and is ideal for use in UPS systems, emergency and security power supplies, data centres, telecommunications systems and industrial control systems.Highlights at a glanceHigh Performance: 1100 W per block at 10 minutes up to 9.6 V block voltage, alternatively 183 W per cell up to 1.6 V/cell at 20 °C.Reliable capacity: 39.6 Ah with 10-hour discharge up to 10.8 V.Long service life: EUROBAT High Performance 10 to 12 years, Yuasa service life up to 10 years at 20 °C.Flexible mounting: Can be operated in any position, except permanently upside down.Simple installation: M5 internal thread, recommended tightening torque 2.5 Nm.Low self-discharge: about 3 percent per month at 20 °C.Maximum performance for demanding applicationsThanks to low impedance and high short-term current capability, the SWL1100 reliably delivers peak performance and keeps output voltage stable. This makes it ideal for UPS systems with high power density, safety power supplies, communication nodes and buffer applications in critical infrastructures.Efficiency meets long service lifeFor standby operation, a float charge voltage of 13.65 V ±1 percent per block applies, corresponding to 2.275 V per cell at 20 °C. The temperature compensation is minus 3 mV per cell and degree Celsius. For heavy-duty charging, 14.50 V ±3 percent per block is provided, 2.42 V per cell, with compensation of minus 4 mV per cell and degree Celsius. No current limitation is required for float charging; 9.90 A is recommended for heavy-duty charging.Technology for flexible applicationsThe wide temperature range enables versatile applications: Discharge from minus 20 °C to plus 60 °C, charge from minus 15 °C to plus 50 °C, storage from minus 20 °C to plus 60 °C. Each cell is equipped with a low-pressure valve. VRLA batteries release hydrogen. Do not operate the battery in gas-tight housings and ensure adequate ventilation.Features ModelYuasa SWL1100 Battery typeVRLA AGM (high load, maintenance-free) Nominal voltage (V)12 Capacity (Ah)26 (at 20h rate) Maximum power1100 watts per cell (at 15 minutes) Charging voltage (float charge)13.5V to 13.8V Charging voltage (cycle operation)14.4V to 15.0V Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeDesign Life EUROBAT 10-12 years Dimensions (L/W/H, mm)205 x 165 x 182 Weight (kg)12.6 ConnectionM6 thread CertificationsIEC 60896-21+22, UL, VdS FAQ about the Yuasa SWL1100What is the SWL1100 designed for?The SWL1100 is a valve-regulated VRLA AGM battery for applications with high short-term power, especially UPS and other high current standby uses. The SWL series is designed as a high-rate series.How does SWL differ from NPL?The SWL series is a further developed NPL design with improved energy-to-density ratio and up to 40 percent additional discharge capacity at high current discharge, with largely the same mechanical and electrical characteristics. What temperature ranges and self-discharge should be considered?At a temperature of 20 °C, the typical self-discharge is about 3 percent capacity loss per month. In terms of storage, the battery can be stored fully charged at −20 to +60 °C. In operation, the charging range is between −15 and +50 °C, while the discharging range covers −20 to +60 °C.In which position may the battery be operated?Installation and operation are permitted up to 90 degrees from the upright position. Permanent overhead installation is not intended.May the SWL1100 be operated in a closed housing?VRLA batteries emit hydrogen gas, which can form explosive mixtures when combined with air. Therefore, operation in hermetically sealed housings is prohibited. Sufficient ventilation must be ensured.
Sonnenschein A606/300 6 V 300 Ah VRLA gel battery f
The Sonnenschein A606/300 is a robust 6 V block from the A600 series equipped with dryfit gel technology. It has been specially developed for maximum reliability in areas such as telecommunications, UPS systems, power supply, security and emergency lighting. The integrated tubular plates ensure a long service life and high cycle stability. Highlights at a glance6 V block battery with 300 Ah at C10, 1.80 V/cell, 20 °C.Design life: 15 years for blocks at 20 °C.Maintenance-free due to VRLA gel with internal gas recombination.Tubular plate technology for high corrosion resistance and long service life.Very low self-discharge. Storable up to 2 years at 20 °C without recharging.Performance in critical infrastructuresThe A606/300 offers stable performance for long bridging times in UPS systems, telecommunications systems and power distribution networks. Its high load capability, from minute to hour ranges, is demonstrated by constant current and power data, enabling precise design for your application.Efficiency and operational reliability in everyday lifeThe dryfit gel technology is characterised by extremely low gas emission and a high recombination rate. This significantly reduces maintenance effort and operational costs, as there is no need to top up with water. Their robust construction makes the batteries resistant to deep discharge and predestined for reliable continuous operation even under challenging conditions.Technology with tubular platesThe tubular plate technology ensures uniform active mass retention, high cycle stability and excellent high current capability. In combination with the gel electrolyte, this results in a durable, safe and horizontally mountable solution for stationary energy storage. Features ModelSonnenschein A606/300 Battery typeOPzV (lead-gel / tubular plate) Rated voltage (V)6 Capacity (Ah)300 (at 10h rate) Short-circuit current (A)7200 Charge voltage (float charge)6.75V (at 20 °C) Charge voltage (boost charge)7.05V - 7.20V Design life20 years (at 20 °C) Cycle life>1200 cycles at 80% depth of discharge MaintenanceMaintenance-free (VRLA gel) Dimensions (L/W/H, mm)362 x 191 x 410 Weight (kg)approx. 59.0 ConnectionM8 screw terminal StandardsIEC 60896-21/-22 FAQs about the Sonnenschein A606/300 gel batteryWhat applications is the A606/300 suitable for?The block is ideal for telecommunications systems, UPS systems, power supply networks, safety and emergency lighting, and hazard warning technology.Is the A606/300 maintenance-free?Yes, the sealed VRLA gel technology with internal gas recombination makes the battery completely maintenance-free. Topping up with water is not necessary.How long is the expected service life?The design life is 15 years for blocks at 20 °C and 80 percent residual capacity C10.What safety and quality standards does the battery meet?This series was developed according to IEC 60896-21/-22. A flame-retardant version according to UL 94-V0 is available. Production takes place in Europe and is ISO 9001 certified.Can the A606/300 be installed horizontally?Yes, the gel technology also allows horizontal installation, making installation and maintenance in cabinets and racks easier.
Vision lead-acid battery 6FM36DX with 12V and 36Ah
The Vision 6FM36DX is a robust, cycle-resistant lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 36 ampere hours. It is specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery offers reliable, leak-proof and long-lasting power. It is the ideal solution for systems that require high cycle stability and deep discharges, and is ideally suited for both cyclic and standby operation.Highlights at a glanceCycle resistant: Developed for a high number of charge and discharge cycles.High capacity: 36 Ah at 12 V (20-hour rate) for a long-lasting power supply.Maintenance-free: Thanks to the leak-proof AGM technology.Low self-discharge: Only approx. 3 % capacity loss per month at 20 °C.Flexible installation: Operation is possible in various positions, except for permanent overhead installation.Durable: A service life of up to 10 years in the design life.Strong performance for cyclic applicationsThe 6FM36DX reliably delivers power in recurring discharge cycles. Its capacity is 36 Ah for a 20-hour discharge and 33 Ah for a 10-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it enables high resistance to cycles and excellent recovery after deep discharge.Robust technology for demanding environmentsThanks to the VRLA technology with AGM system, the 6FM36DX is absolutely maintenance-free and leak-proof. The electrolyte is securely enclosed in a glass fibre mat, which enables safe handling and operation in any position. The battery is equipped with self-closing low-pressure vent valves that ensure pressure equalisation within the cells. The case is made of robust ABS plastic, which is also available as a flame-retardant version (UL94:V0) on request. The low self-discharge rate of around 3 % per month enables long-term storage with high readiness for use.Specifications ModelVision 6FM36DX Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)36 (at 20h rate) Max. discharge current300 A (for 5s) Charging voltage (maintenance charge)13.6 V to 13.8 V Charging voltage (cycle operation)14.4 V to 14.7 V Operating temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Service lifeup to 10 years (in design life) Dimensions (L/W/H, mm)195 x 130 x 155 Weight (kg)11.4 ConnectionM6 screw terminal CertificationsISO9001, ISO14001, UL FAQs for VISION 6FM36DX lead-acid batteryWhat applications is the 6FM36DX best suited for?This battery was specifically developed for cyclic applications where the battery is regularly discharged and recharged. It is ideal as a main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunication systems and mobile measuring equipment.What does "cycle resistant" mean?A cycle-resistant battery is specifically designed to cope with a high number of charge and discharge cycles without significantly losing capacity or service life. This distinguishes it from conventional lead batteries, which are more designed for standby operation.How do I charge the battery correctly?We recommend using a charger designed for AGM batteries with a capacity of 36 Ah. Observe the voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charge operations and 14.4 V to 14.7 V for cycle charging operations. Excessive charging current can shorten the service life of the battery.How long does the 6FM36DX battery last?The service life of the battery is up to 10 years at 20 °C in the design life. However, the actual life depends heavily on the individual operating conditions, the depth of discharge and the ambient temperature. For example, over 650 cycles can be achieved with 50 % depth of discharge, and even over 1500 cycles at 30 % depth of discharge.
Sonnenschein A612/150 A lead gel battery 12V 150Ah
The Sonnenschein A612/150 A is an absolutely maintenance-free lead-gel block battery with high capacity, developed for high operational safety and long service life in professional standby and light cyclic applications. As part of the globally proven A600 series with Dryfit® gel technology, this battery offers outstanding reliability. With a nominal voltage of 12V and a capacity of 150 Ah, it is the ideal energy source for fail-safe emergency power supplies, signalling systems and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High reliability: Classified as "General Purpose" by Eurobat for a long service life of 6 to 9 years.High cycle strength: Provides good cycle strength and excellent recovery even after deep discharge.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High shelf life and always ready for use in emergencies.Maximum security of supply for critical infrastructureThe Sonnenschein A612/150 A is a versatile specialist for standby parallel operation (standby use) and light traction applications. Its main areas of application are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems, and power supply in hospitals, rail facilities, and marine engineering.Proven Dryfit® gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, immobilises the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also provides excellent cycle strength and very low self-discharge. The internal gas recombination protects from capacity loss and makes operation particularly safe and efficient, without the need to top up with water.Developed for longevity and reliabilityThe A600 series has been developed for maximum cost-effectiveness throughout its service life. The long service life of up to 9 years reduces the need for expensive battery replacements in fixed systems. The high manufacturing quality and the use of highly pure materials ensure consistently high performance and thus contribute to high operational safety of the overall system. Features ModelSonnenschein A612/150 A ApplicationStandby / UPS / Telecommunications TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)150 (C10) Design life15 years (Eurobat Very Long Life) Dimensions (L x W x H in mm)538 x 209 x 374 ConnectionStandard Autopol (SAE) Weight (kg)approx. 63.0 FAQs about the Sonnenschein A612/150 A lead-gel batteryWhat is the main advantage of the Dryfit® gel technology?The key advantage is the combination of absolute maintenance freedom, high cycle strength and extreme durability. Compared to AGM batteries, gel batteries are often even more robust against deep discharging and offer very consistent performance over a long period.What does the "Eurobat General Purpose" classification mean?Eurobat is the association of European battery manufacturers. The classification "General Purpose" means that this battery is designed for an expected service life of 6 to 9 years under defined standby conditions (usually 20°C ambient temperature and correct trickle charge).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this is optimised for standby parallel operation. It is kept permanently at a constant voltage (trickle charge) and only rarely needs to deliver energy. A starter battery is designed for short-term, high currents. A solar battery (pure cycle battery) is optimised for daily, deep discharge and recharge.How must this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to municipal recycling centres to ensure it is properly recycled.
Sonnenschein SOLAR S12/32 G6 lead-gel battery 12V 32Ah
The Sonnenschein S12/32 G6 is an absolutely maintenance-free lead-gel block battery that has been specially developed for the requirements of cyclical solar and off-grid applications. As part of the globally proven Sonnenschein SOLAR series with Dryfit® gel technology, this battery offers unrivalled cycle stability and reliability. With a nominal voltage of 12V and a nominal capacity of 32 Ah (C100), it is the ideal storage solution for small self-sufficient energy systems, signalling systems and mobile applications.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for daily, deep charging and discharging operation (approx. 800 cycles at 60% DoD).Compact design: High energy density in a compact and robust housing.Deep discharge safe: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or periods of low solar radiation.Maximum security of supply for self-sufficient systemsThe Sonnenschein S12/32 G6 is the specialist for cyclical applications where the battery is charged and discharged daily. Its main areas of application are small off-grid solar systems for holiday homes, motorhomes, boats and yachts. It is also ideal for professional applications in telecommunications, traffic guidance systems, parking machines or signalling systems that require a self-sufficient and maintenance-free energy supply.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure in solar operation. The gel technology ensures excellent cycle stability and very low self-discharge.Developed for longevity and reliabilityThe SOLAR series was developed for maximum economy over the entire service life. The extremely long cycle life significantly reduces the need for costly and time-consuming battery replacements. The high production quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of your self-sufficient energy supply. Features ModelSonnenschein SOLAR S12/32 G6 ApplicationSolar / cycle operation (off-grid) TechnologyLead gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)32 (C100) Cycle stabilityapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)167 x 176 x 126 ConnectionG6 (M6 internal thread) Weight (kg)approx. 11.5 FAQs about the Sonnenschein S12/32 G6 lead-gel batteryWhat is the main advantage of Dryfit® gel technology in solar operation?The decisive advantage is the combination of absolute freedom from maintenance, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time.What do the capacity specifications C20 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, as slow discharges over several days are common here. C20 (discharged over 20 hours) is a common comparison value.What is the difference between this solar battery (S series) and a standby battery (A series)?A solar battery (cyclic) like this one is optimised for daily, deep discharge and recharging (high number of cycles). A standby battery (A series) is designed for standby parallel operation (e.g. in UPS systems), is permanently charged and only rarely discharged (long design service life in years).How should this lead-acid battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any dealer who sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Sonnenschein A412/65 F10 lead gel battery 12V 65Ah
The Sonnenschein A412/65 F10 is an absolutely maintenance-free lead-gel block battery that has been developed for the highest demands on operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 65 Ah, it is the ideal energy source for fail-safe emergency power supplies in security technology, UPS systems and medical technology.Highlights at a glanceSuperior Dryfit® Gel technology: Absolutely maintenance-free over the entire service life, maximum reliability, and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use in demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A412/65 F10 is the specialist for standby parallel operation (standby use), where an immediate and reliable power supply is crucial in the event of a mains failure. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and security lighting systems, fire detection and alarm systems as well as the power supply in hospitals and telecommunications systems.Proven Dryfit® Gel technologyThe Dryfit® Gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A400 series was developed for maximum efficiency over the entire service life. The extremely long service life of 12 years and more significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of the entire system. Features ModelSonnenschein A412/65 F10 ApplicationStandby / UPS / Telecommunications TechnologyLead gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)65 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)353 x 175 x 190 ConnectionF10 (M8 internal thread) Weight (kg)approx. 25.0 FAQs about the Sonnenschein A412/65 F10 lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The decisive advantage is the combination of absolute maintenance-free operation, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct trickle charging).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this is optimised for standby parallel operation. It is permanently kept at a constant voltage (float charge) and only rarely needs to supply energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How should this lead-acid battery be disposed of?Lead-acid batteries contain substances that are harmful to the environment and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to municipal recycling centres to ensure proper disposal.
Sonnenschein GF 12 063 Y Lead-gel battery 12V 63Ah
The Sonnenschein GF 12 063 Y is an absolutely maintenance-free lead-gel block battery that has been developed to meet the highest demands for cycle stability and reliability in light traction applications. As part of the globally proven GF-Y series with Dryfit® gel technology, this battery offers an exceptional service life and robustness. With a nominal voltage of 12V and a capacity of 63 Ah (C5), it is the ideal energy source for daily, demanding use in electric wheelchairs, scooters and other mobile electric vehicles.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout its entire service life, highly reliable and leak-proof.High cycle stability: Developed for demanding, daily charging and discharging operation (approx. 450 cycles as per IEC 60254-1).High capacity: 63Ah (C5) for long runtimes in a standard form factor.Deep-discharge safe: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for tough everyday use in mobile applications.Maximum power for rehab and leisure applicationsThe Sonnenschein GF 12 063 Y is the specialist for mobile, electrically powered vehicles in the rehab and leisure sector. Its main areas of application are electric wheelchairs, scooters for seniors, golf caddies, mobile lifting systems, and small cleaning machines. Wherever vehicles need to work reliably and maintenance-free on a daily basis, this battery delivers the necessary energy and endurance.Proven Dryfit® Gel TechnologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and installable in any position, but also ensures excellent cycle stability and very low self-discharge. Unlike conventional wet batteries, acid stratification is prevented, which significantly prolongs service life in tough cycling operations.Developed for longevity and economyThe GF-Y series was developed for maximum economy and minimal downtime in professional use. The high cycle life reduces the need for premature replacement and thus lowers the total cost of ownership (TCO) of your devices. Absolute maintenance-free operation eliminates the time and expense required for regular topping up with water and ensures maximum job safety. Features ModelSonnenschein GF 12 063 Y O ApplicationTraction / drive TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)63 (C5) / 70 (C20) Cycle stabilityapprox. 450 cycles (IEC 60254-1) Dimensions (L x W x H in mm)261 x 171 x 210 ConnectionF-M6 (M6 internal thread) Weight (kg)approx. 23.0 FAQs on the Sonnenschein GF 12 063 Y lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specially designed to supply electric motors with energy over a long period of time. It is extremely cycle-resistant, meaning it can be regularly deeply discharged and recharged, as is the case with, for example, electric wheelchairs in daily use. This distinguishes it from a starter battery.What is the main advantage of Dryfit® Gel Technology in mobile applications?The key advantage is the absolute maintenance-free operation. With mobile devices, there is no need for time-consuming and error-prone checking and refilling of water. In addition, the batteries are leak-proof, even when tilted or under strong vibrations, significantly increasing operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C5 (discharge over 5 hours) is the standard for traction applications, as high currents are involved. C20 (discharge over 20 hours) is a common comparative value where the nominal capacity is higher.How should this lead battery be disposed of?Lead batteries contain environmentally hazardous substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to local recycling centers to ensure proper disposal.
Sonnenschein Lead-acid battery S12/17 G5
Sonnenschein Lead-acid battery S12/17 G5
Sonnenschein SOLAR S12/41 A lead gel battery 12V 41Ah
The Sonnenschein S12/41 A is an absolutely maintenance-free lead-gel block battery that has been specially developed for the requirements of cyclical solar and off-grid applications. As part of the globally proven Sonnenschein SOLAR series with Dryfit® gel technology, this battery offers unrivalled cycle stability and reliability. With a nominal voltage of 12V and a nominal capacity of 41 Ah (C100), it is the ideal storage solution for small self-sufficient energy systems, signalling systems and mobile applications.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.High cycle stability: Developed for daily, deep charging and discharging operation (approx. 800 cycles at 60% DoD).Compact design: High energy density in a compact and robust housing.Deep discharge proof: Excellent recovery even after repeated deep discharges and robust against acid stratification.Low self-discharge: Perfect for seasonal use or periods of low solar radiation.Maximum security of supply for self-sufficient systemsThe Sonnenschein S12/41 A is the specialist for cyclical applications in which the battery is charged and discharged daily. Its main areas of application are small off-grid solar systems for holiday homes, motorhomes, boats and yachts. It is also ideal for professional applications in telecommunications, traffic guidance systems, parking machines or signalling systems that require a self-sufficient and maintenance-free energy supply.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also effectively prevents acid stratification – one of the main causes of premature battery failure in solar operation. The gel technology ensures excellent cycle stability and very low self-discharge.Developed for longevity and reliabilityThe SOLAR series was developed for maximum economy over the entire service life. The extremely long cycle life significantly reduces the need for costly and time-consuming battery replacements. The high production quality and the use of high-purity materials ensure constant performance and thus contribute to the high operational reliability of your self-sufficient energy supply. Battery features ModelSonnenschein SOLAR S12/41 A ApplicationSolar / cycle operation (off-grid) TechnologyLead gel (dryfit®) Rated voltage (V)12 Capacity (Ah)41 (C100) Cycle stabilityapprox. 800 cycles (at 60% DOD) Dimensions (L x W x H in mm)210 x 176 x 174 ConnectionStandard Auto terminal (SAE) Weight (kg)approx. 15.5 FAQs about the Sonnenschein S12/41 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology in solar operation?The decisive advantage is the combination of absolute freedom from maintenance, maximum cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over a long period of time.What do the capacity specifications C10 and C100 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, as slow discharges over several days are common here. C10 (discharge over 10 hours) is relevant for faster discharging.What is the difference between this solar battery (S series) and a standby battery (A series)?A solar battery (cyclic) like this one is optimised for daily, deep discharge and recharging (high number of cycles). A standby battery (A series) is designed for standby parallel operation (e.g. in UPS systems), is permanently charged and only rarely discharged (long design service life in years).How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.
Sonnenschein A412/50 G6 lead gel battery 12V 50Ah
The Sonnenschein A412/50 G6 is an absolutely maintenance-free lead-gel block battery developed for the highest demands on operational reliability and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® Gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 50 Ah, it is the ideal energy source for fail-safe emergency power supplies in security technology, UPS systems, and medical technology.Highlights at a glanceSuperior Dryfit® Gel technology: Absolutely maintenance-free throughout the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) in accordance with Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High shelf life and always ready for use in case of emergency.Maximum supply security for critical infrastructureThe Sonnenschein A412/50 G6 is the specialist for standby parallel operation, where immediate and reliable energy transfer is crucial in the event of a mains failure. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and safety lighting systems, fire alarm and security systems, as well as power supply in hospitals and telecommunications systems.Proven Dryfit® Gel technologyThe Dryfit® Gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient, without the need to refill with water.Developed for longevity and reliabilityThe A400 series was developed for maximum efficiency over the entire service life. The extremely long service life of 12 years and more significantly reduces the necessity for costly and extensive battery replacements in fixed installations. The high manufacturing quality and the use of highly pure materials ensure consistent performance and thus contribute to the high operational reliability of the entire system. Features ModelSonnenschein A412/50 G6 ApplicationStandby / UPS / emergency lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)50 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)278 x 175 x 190 ConnectionG6 (M6 internal thread) Weight (kg)approx. 21.0 FAQs about the Sonnenschein A412/50 G6 lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The decisive advantage is the combination of absolute maintenance-free operation, highest cycle stability, and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent performance over a long period of time, making them the premium solution for critical standby applications.What does the classification "Eurobat Long Life" mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct float charging).What is the difference between a standby battery and a starter or solar battery?A standby battery like this is optimised for standby parallel operation. It is permanently maintained at a constant voltage (float charge) and only rarely needs to deliver energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharging and recharging.How must this lead-acid battery be disposed of?Lead-acid batteries contain environmentally hazardous substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to municipal recycling centres to ensure proper disposal.
Exide Marathon M12V35FT industrial battery with 12V and 35Ah
The Exide Marathon M12V35FT is a compact and powerful lead-acid battery with 12 V and 35 Ah (C10). Thanks to its front terminal technology, it is particularly easy to install and maintain, making it ideal for modular cabinets and battery racks. With its long service life and proven AGM technology, it is suitable for telecommunications and power supply applications with medium to long backup times.Highlights at a glance12 V nominal voltage and 35 Ah capacity (C10 at 20 °C)Front terminals for easy installationDesign life over 12 years according to EUROBAT classification "Very Long Life"AGM technology with highly compressed glass mat separatorsExtremely low gassing thanks to 99% internal gas recombinationMaintenance-free over the entire service life (no water topping up required)Powerful performance in a compact formThe Exide Marathon M12V35FT impresses with its high power density and compact dimensions. With a discharge output of up to 1089 W per block (10 minutes, 1.6 V/cell, 20 °C), it provides a reliable power supply even when high energy is required at short notice.Efficiency thanks to long service life and low self-dischargeWith a design life of over 12 years in standby operation, the M12V35FT provides a sustainable and cost-efficient solution. Its low self-discharge extends storage time, while short recharge times ensure it is quickly ready for use.AGM technology for safety and reliabilityThe proven AGM technology (Absorbent Glass Mat) with robust lead-calcium grids guarantees high corrosion resistance, safe gas recombination and reliable operation. In addition, central degassing systems further enhance operational safety.Features ModelExide Marathon M12V35FT Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)12 Capacity (Ah)35 (at 10h rate) Short-circuit current (A)1450 Charge voltage (float charge)13.68V (at 20°C) Charge voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Design life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)209 x 108 x 239 Weight (kg)approx. 13.5 TerminalM6 front terminal CertificationsISO 9001, ISO 14001, UL FAQs about the Exide Marathon M12V35FTFor which applications is the Exide Marathon M12V35FT suitable?The battery is ideal for telecommunications systems, power supply applications, UPS systems and emergency lighting.How long is the service life of the Exide Marathon M12V35FT?The battery offers a design life of more than 12 years in standby operation and meets the EUROBAT classification "Very Long Life".What are the benefits of the front terminal technology of the Exide Marathon M12V35FT?The front terminals make installation and maintenance easier, particularly in modular cabinets and battery racks with restricted access.Is the Exide Marathon M12V35FT maintenance-free?Yes, the battery is completely maintenance-free. There is no need to top up water during its entire service life.Can the Exide Marathon M12V35FT be transported?Yes, the battery is not subject to any transport restrictions according to IATA, DGR, section A67 and can be safely transported by rail, road, sea or air.
Vision Lead-acid battery CP1250HF2 with 12V and 5Ah
The Vision CP1250HF2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 5 Ah capacity. This HF Series battery is a high-current type specifically designed for demanding standby operation. Equipped with maintenance-free AGM technology, this battery provides an extremely reliable power supply for critical applications that require high performance in a short time, such as in uninterruptible power supplies (UPS).Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 5 years in standby mode (float) at 20 °C.Reliable capacity: 5 Ah at 12 V for secure power supply with a small footprint.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Flexible mounting: Operation is possible in all positions, except permanent use upside down.Tested quality: Manufactured to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for safety-critical applicationsThe Vision CP1250HF2 delivers a nominal capacity of 5 Ah in a 20-hour discharge. Its particular strength lies in its ability to deliver very high currents for short periods of time. This makes it destined for use in uninterruptible power supplies (UPS) that have to supply high loads when starting up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fibre fleece (AGM system), the CP1250HF2 is completely maintenance-free and leak-proof. The battery features self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is available on request also in a flame-retardant version according to UL94:V0.Features ModelVision CP1250HF2 Battery typeVRLA AGM (high current) Nominal voltage (V)12 Capacity (Ah)5 (at 20h rate) Maximum discharge current75A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)90 x 70 x 107 Weight (kg)approx. 1.75 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1250HF2 lead-acid batteryFor which applications is the CP1250HF2 suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devicesWhat does the designation "HF" and "high current capability" mean?The designation "HF" for Vision batteries stands for "High Rate" or high current. These batteries are constructed with thinner lead plates and a larger active surface, resulting in reduced internal resistance. This allows them to deliver significantly higher currents for short periods than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference compared to a CP1250A standard battery?Although both have the same capacity and size, the CP1250HF2 is specially optimised for high power delivery. The standard battery CP1250A is an all-purpose type. The HF type is the first choice when maximum power output is required in the first few minutes of a power failure, as is the case in UPS systems.What is the correct charging voltage for this battery?For maximum service life in standby operation, the float charge voltage at 20 °C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to sealed AGM technology, the battery is completely maintenance-free. There is no need to top up with water, and it can be safely operated in devices and indoors.Can I use this battery for an electric scooter?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For electric scooters that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by "DX" on Vision), as these achieve a significantly longer service life in cyclic operation.
Sonnenschein A406/165 F10 - 6 V 165 Ah gel battery
The Sonnenschein A406/165 F10 is a high-quality industrial battery from the A400 series based on proven dryfit® gel technology. It combines long service life, reliable performance, and excellent value for money. With 165 Ah (C10), it is the ideal solution for uninterruptible power supplies, telecommunications, emergency lighting, and many other stationary applications.Highlights at a glance6 V block battery with 165 Ah (C10, 1.80 V/Z, 20 °C)Design life: 12 years and longer (EUROBAT “Long Life”)Maintenance-free: VRLA gel technology (no topping up with water necessary)Very low self-discharge – up to 2 years storage at 20 °CReinforced grid plates made of lead-calcium alloy for high corrosion resistancePowerful for critical applicationsThe A406/165 F10 has been specially developed for applications in telecommunications, UPS systems, and safety and emergency lighting. It ensures reliable power supply, even during extended bridging periods, thanks to its high load capacity.Efficiency and safety in operationThanks to dryfit® gel technology and gas recombination, the battery operates with extremely low maintenance and low gas emissions. This reduces operating costs and enables safe use even in sensitive environments.Robust design for long service lifeThe A406/165 F10 gel battery is distinguished by a stable construction, deep-discharge-proof technology, and reinforced grid plates. These features ensure a service life of over 12 years and meet the highest standards of reliability and safety. Features ModelSonnenschein A406/165 F10 Battery typeVRLA lead gel (dryfit) Nominal voltage (V)6 Capacity (Ah)165 (at 10h rate) Short-circuit current (A)3100 Charging voltage (float charge)6.75V (at 20°C) Charging voltage (boost charge)7.05V - 7.20V Design life12 years (EUROBAT: Long Life) Cycle lifeapprox. 800 cycles at 60% depth of discharge MaintenanceMaintenance-free (VRLA gel) Dimensions (L/W/H, mm)310 x 180 x 285 Weight (kg)approx. 32.5 TerminalM10 screw terminal (F10) StandardsIEC 60896-21/-22 FAQs about the Sonnenschein A406/165 F10 VRLA gel batteryFor which applications is the A406/165 F10 suitable?It is ideally suited for emergency power and UPS systems, telecommunications equipment, traffic and security technology, emergency lighting, as well as fire alarm and railway technology.Is the A406/165 F10 maintenance-free?Yes, thanks to the sealed VRLA gel technology the battery is absolutely maintenance-free, no need to top up with water.How long is the service life of the battery?The design life is 12 years and longer in accordance with EUROBAT “Long Life”.Can the gel battery be deeply discharged?Yes, the A406/165 F10 is deep-discharge proof and thus reliable in cyclic applications as well.What are the benefits of dryfit® technology in terms of safety and the environment?This technology ensures maintenance-free operation, is leakproof, very low-gassing, durable, fully recyclable, has a low CO₂ footprint, and can be installed horizontally; it is also not subject to any transport restrictions, e.g. in accordance with IATA A67.
Sonnenschein A412/180 A lead gel battery 12V 180Ah
The Sonnenschein A412/180 A is an absolutely maintenance-free lead-gel block battery with very high capacity, developed for ultimate operational safety and extremely long service life in professional standby applications. As part of the globally proven A400-series with Dryfit® gel technology, this battery provides exceptional reliability. With a nominal voltage of 12V and a very high capacity of 180 Ah, it is the ideal energy source for fail-safe emergency power supply in large industrial plants, data centres and safety-critical systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout its entire service life, maximum reliability and leakproof.Extreme longevity: Classified as “Long Life” (12 years and beyond) in accordance with Eurobat for maximum investment security.Very high capacity: 180 Ah for maximum bridging times during power failures.High cycle stability and deep-discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Maximum supply security for critical infrastructureThe Sonnenschein A412/180 A is the specialist for standby parallel operation, where immediate and reliable energy supply in the event of a power failure is essential. Its main areas of application are large uninterruptible power supplies (UPS), telecommunication and IT systems, emergency and safety lighting installations as well as energy supply in power plants, substations and railway installations. Wherever power outages would have serious consequences, this battery provides the necessary security.Proven Dryfit® gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leakproof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient—with no need to add water.Engineered for longevity and reliabilityThe A400-series was developed for maximum economy throughout its entire service life. The extremely long service life of 12 years or more significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The high manufacturing quality and the use of ultra-pure materials ensure constant performance and thus contribute to the high operational safety of the overall system. Features ModelSonnenschein A412/180 A ApplicationStandby / UPS / Safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)180 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)513 x 275 x 353 ConnectionStandard Autopole (SAE) Weight (kg)approx. 69.0 FAQs about the Sonnenschein A412/180 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology?The key benefit is the combination of absolute maintenance freedom, highest cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and provide very constant performance over a long period, making them the premium solution for critical standby applications.What does the classification “Eurobat Long Life” mean?Eurobat is the association of European battery manufacturers. The “Long Life” classification means that this battery is designed for an expected lifetime of 12 years or more under defined standby conditions (normally 20°C ambient temperature and proper float charging).What is the difference between a standby battery and a starter or solar battery?A standby battery like this one is optimised for standby parallel operation. It is kept permanently at a constant voltage (float charge) and only rarely releases energy. A starter battery is designed for short-term high currents. A solar battery (cycle battery) is optimised for daily deep discharge and recharge.How must this lead-acid battery be disposed of?Lead-acid batteries contain environmentally hazardous substances and must not be disposed of in domestic waste. You can return your old battery free of charge at any dealer selling new batteries or at municipal recycling centres to ensure proper recycling.
Sonnenschein GF 06 160 V1 - 6 V 160 Ah gel traction battery
The Sonnenschein GF 06 160 V1 is a powerful and maintenance-free gel battery from the GF-V series. It has been specially developed for heavy-duty industrial use and offers reliable energy supply for automated guided vehicles (AGVs), lifting platforms, cleaning machines, material handling equipment, electric vehicles and pallet trucks.Highlights at a glance6 V block battery with 160 Ah (C5) and 196 Ah (C20)Up to 700 charging cycles according to IEC 60254-1Maintenance-free due to closed VRLA gel technology (no topping up)Very high intrinsic safety and extremely reliableLow self-discharge and therefore long shelf lifeRobust construction for industrial applicationsPowerful in industrial useThe GF 06 160 V1 is designed for applications in demanding material handling, intralogistics as well as for mobile machines. It delivers constant energy even under tough conditions and ensures a reliable power supply across many charging cycles.Efficiency through gel technologyThanks to dryfit® gel technology, the battery is maintenance-free, as the electrolyte is bound in the gel and therefore no topping up with water is necessary. The extremely low self-discharge also ensures a long shelf life without loss of performance.Robust and durableWith a cycling capacity of up to 700 charging cycles, the battery stands out for its high reliability. The robust housing and sealed design provide safety and stability even in harsh environments. Features ModelSonnenschein GF 06 160 V1 Battery typeVRLA lead-gel (traction battery) Nominal voltage (V)6 Capacity (Ah)160 (at 5h rate) Cycle lifeapprox. 700 cycles (to IEC 60254-1) Charging voltage (cycle use)7.05V - 7.20V MaintenanceMaintenance-free (dryfit gel) Operating temperature (°C)-20 ~ 50 Self-dischargeVery low Dimensions (L/W/H, mm)244 x 190 x 275 Weight (kg)approx. 29.5 ConnectionAutopole (conical) StandardsIEC 60254-1 FAQs on the Sonnenschein GF 06 160 V1 gel batteryIs the GF 06 160 V1 maintenance-free?Yes, the battery is completely maintenance-free thanks to VRLA gel technology. Topping up with water is not necessary.Can the gel battery be deep discharged?Yes, the GF 06 160 V1 is protected against deep discharge and is reliable even under cyclic use.Is the battery subject to transport restrictions?No, operational VRLA gel batteries such as the GF 06 160 V1 are exempt from transport restrictions according to IATA A67.What are the typical dimensions, weight and terminal?The battery measures 246 × 192 × 275 mm (length × width × height), weighs about 29–30 kg, and is equipped with an A-terminal (round pole). The pole arrangement is diagonal: positive pole front right, negative pole rear left.For which applications is the GF 06 160 V1 particularly suitable?It is predestined for demanding industrial traction tasks such as in cleaning machines, mobile lifting platforms, automated guided vehicles, wheelchairs, scooters, golf caddies and electric boats.How many charging cycles does the battery achieve?It reaches up to 700 charging cycles at 75% discharge according to IEC 60254-1, which ensures a long service life under cyclic conditions.
Yuasa NPL130/6IFR lead-acid battery with 6V and 130Ah
The YUASA NPL130/6IFR impresses with high capacity, long service life and robust construction for industrial applications. It is the ideal lead-acid battery for systems that require a reliable power supply with simultaneously high operational safety.Highlights at a glanceLong service life: EUROBAT "Long Life" for up to 12 years of use.High capacity: Delivers 130 Ah at 20-hour discharge.Flexible installation: Installation possible in almost any position.High safety: With low-pressure release valves for pressure equalisation.Powerful performance for challenging applicationsThe YUASA NPL130/6IFR is a high-quality VRLA industrial battery, developed for applications where reliability and constant performance are crucial. With a capacity of 130 Ah and a maximum discharge current of 500 A for one second, it offers a reliable power supply, even under high load requirements. It is ideally suited for UPS systems, telecommunication systems, emergency lighting and numerous industrial applications.Efficient energy and long service lifeThe NPL130/6IFR belongs to the EUROBAT "Long Life" class and achieves a useful life of up to 12 years at 20 °C. Its low self-discharge of only around 3 % per month ensures that the battery remains ready for use even after long periods of inactivity. The case is made of flame-retardant ABS plastic (UL94:V0) and reliably protects the battery from mechanical influences and increases operational safety.Technology for industrial energy applicationsThe YUASA NPL130/6IFR can be flexibly installed in almost any position, except for permanent overhead mounting. The battery has M6 female thread or bolt connections, which ensure simple and secure connection. The recommended maximum charging current in cyclic operation is 32.5 A, while no limitation is required in float charge operation. Thanks to low-pressure release valves, the gas pressure within the cells is safely regulated, ensuring low-maintenance and safe operation. The NPL130/6IFR meets international standards and certifications, including ISO 9001, ISO 14001 and ISO 45001 as well as approvals from Underwriters Laboratories Inc. ModelYuasa NPL130/6IFR Battery typeVRLA AGM Nominal voltage (V)6 Capacity (Ah)130 (at 20h rate) Maximum discharge current1400A (short-circuit current) Charging voltage (float charge)6.825V (±1%) Charging voltage (cyclic operation)7.3V (±3%) Operating temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Storage temperature (°C)-20 ~ 50 Service lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)345 x 172 x 281 Weight (kg)31 ConnectionM8 thread CertificationsISO9001, ISO14001, OHSAS18001, UL, VdS FAQs for Yuasa Lead-acid 6V 130Ah - NPL130/6IFRWhat is the service life of the NPL130/6IFR?The NPL130/6IFR belongs to the EUROBAT "Long Life" class and offers an expected useful life of up to 12 years at 20 °C.For which applications is the battery suitable?The NPL130-6IFR is particularly suitable for:Uninterruptible power supplies (UPS) Telecommunication systems Safety and emergency lighting Fire alarm and safety systems Medical devices Photovoltaic systems Control and regulation systems.Can the battery be installed flexibly?Yes, the battery can be operated in almost any position, apart from permanently upside down.What safety features does the NPL130/6IFR offer?The battery features a flame-retardant ABS case, low-pressure release valves for gas pressure regulation and maintenance-free VRLA technology for safe operation.What is the self-discharge rate?The self-discharge rate is approx. 3 % per month at 20 °C, so the battery remains ready for use even after longer periods of inactivity.What connections does the battery have?The NPL130/6IFR is equipped with M6 female thread or bolt terminals that allow safe and easy installation.
R&B Maintenance-free lead-acid battery – 4V / 3.5Ah (AGM)
The R&B 4V / 3.5Ah is a compact and absolutely maintenance-free lead-fleece battery (AGM technology). With a nominal voltage of 4 volts, this battery is a true specialist and supplies reliable energy for a variety of compact industrial and everyday devices.Thanks to VRLA technology (Valve Regulated Lead Acid), the housing is completely sealed. The electrolyte is safely bound in a glass fibre mat, making this battery extremely leakproof, resistant to vibrations and especially easy to maintain. It is suitable for both cyclic use (frequent charging/discharging) and standby parallel operation (standby).Highlights at a glanceMaintenance-free AGM technology: The electrolyte is safely bound in a glass fibre mat, which makes the battery completely leakproof and eliminates the need to top up water throughout its entire life.Position-independent operation: Thanks to the sealed VRLA design, the battery can be installed and operated safely in almost any position (except permanently upside down).Low self-discharge: The high-quality lead chemistry ensures that the battery retains its charge very well even after prolonged storage (e.g. in seasonally used devices).High cycle resistance: The robust grid plates are designed to withstand repeated daily charging and discharging processes (e.g. in mobile devices) with ease.Standardised connections: Equipped with Faston plug-in contacts (usually 4.8 mm) commonly used in this size class for quick and tool-free replacement ("Plug & Play").Fields of applicationThe 4V / 3.5Ah specification is a widely used industry standard for the following devices:Electronic scales: The absolute classic. Used in thousands of market scales, platform scales and counting scales as a backup or main source of power.Hand spotlights & torches: Large, rechargeable LED or halogen spotlights for tradesmen, security services or private use.Emergency and safety lighting: Compact escape route lights that come into operation in the event of a power failure.Toys: Small electric cars or model building applications requiring 4V.Insect killers: Mobile, rechargeable devices for outdoor use.Assembly & safety instructionsAvoid deep discharge: Lead batteries do not tolerate deep discharges. Charge the battery immediately after every use (e.g. after using the scale at the market). Never store it in a discharged state.Correct charging technology: Only use chargers that are expressly suitable for 4V lead batteries. A 6V or 12V charger would cause the battery to boil immediately and destroy it (risk of swelling).Plug contact: Before installation, check that the cable shoes of your device sit tightly on the 4.8 mm Faston contacts. A loose contact leads to voltage drops and heat development.Recycling: Lead batteries are highly recyclable but also toxic. Never dispose of old batteries in household waste, always return them to a recycling centre or specialist battery retailer. Features ModelR&B Maintenance-free lead battery (AGM) Technology**AGM VRLA** (lead-fleece, sealed) Nominal voltage**4 V** (2 cells at 2 volts each) Nominal capacity**3.5 Ah** (C20) Dimensions (L x W x H in mm)approx. **90 x 34 x 60** (height over terminals often approx. 65 mm) Connection**Faston 4.8 mm** (F1 flat plug) Weightapprox. **0.45 - 0.5 kg** Housing materialABS plastic Typical applicationsShop scales, LED hand spotlights, electronic toys Charging voltage (cyclic)4.8 V - 5.0 V (at 25°C) FAQs about the R&B 4V/3.5AhWill this battery fit as a replacement in my electronic scales?Yes, in the vast majority of cases. The values "4V" and "3.5Ah" (often also 3.2Ah or 4.0Ah) at dimensions of approx. 90x34x60 mm are the quasi-standard for mobile market and platform scales. To be on the safe side, simply measure your old part and compare the dimensions.My old battery has 4V and 4.0Ah. Can I still use this 3.5Ah battery?Yes, absolutely. The voltage (4V) is the crucial factor and must match. The capacity (Ah) merely indicates the runtime. A 3.5Ah battery works perfectly in a 4.0Ah device; the maximum operating time (e.g. the headlamp's lighting time) is only slightly shorter.What is the best way to store the battery over winter?Charge the battery to 100% before storage. Disconnect it from the device (to exclude silent consumers) and store it in a cool, dry place (approx. 10–15°C). Recharge the battery at the latest every 3 to 4 months to prevent damage from sulphation.
Exide Sprinter P6V1700 - 6 V 122 Ah AGM high-performance battery
The Exide Sprinter P6V1700 is an extremely powerful, maintenance-free AGM battery that has been specially developed for applications with the highest high-current requirements. With an output of 1700 W (15 min, 1.60 V/Z, 25 °C) and a nominal capacity of 122 Ah, it provides reliable energy for UPS systems, telecommunications, safety lighting and many other areas of critical power supply.Highlights at a glanceHigh power density: 1700 W output at 15 minutes (1.60 V/Z, 25 °C)Compact and space-saving: 273 × 167 × 191 mm at only approx. 25 kgLong service life: 10–12 years design life according to EUROBAT “High Performance”Maintenance-free: AGM technology with gas recombination, no need to top up waterMaximum safety: UL-certified, optional flame-retardant housing UL 94-V0High performance for critical applicationsThe Sprinter P6V1700 battery is optimised for short discharge times and offers excellent high-current properties. It is ideally suited for uninterruptible power supplies (UPS), telecommunication systems, safety and hazard signalling technology, as well as for applications in power supply and railway technology. Thanks to its high power density, it delivers reliable energy even with compact dimensions.Efficiency and safety in operationThe AGM technology with glass mat separator ensures rapid recharging, low self-discharge and high operational safety. With an internal gas recombination rate of 99%, the battery is virtually gas-free and can be operated without any special maintenance. It is also transportable without restrictions according to IATA A67, safe by road, rail, water and air.Advanced AGM technologyThe Sprinter P6V1700 is based on a high-quality lead-calcium alloy that guarantees maximum corrosion resistance. The compressed glass mat separators provide high operational safety and allow for a long service life. It is produced in Europe under ISO 9001-certified standards, a guarantee of consistent quality.Features ModelExide Sprinter P6V1700 Battery typeVRLA AGM (High-Rate / UPS) Rated voltage (V)6 Capacity (Ah)122 (at 10h rate) Short-circuit current (A)3700 Charging voltage (float)6.81V (at 20°C) Charging voltage (boost)7.05V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life10–12 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)244 x 132 x 275 Weight (kg)approx. 21.0 ConnectionM8 screw terminal CertificationsISO 9001, ISO 14001, UL FAQs about the Exide Sprinter P6V1700 lead batteryFor which applications is the Sprinter P6V1700 suitable?The battery is ideal for UPS systems, telecommunication systems, safety lighting, hazard signalling technology as well as energy supply and railway technology.How long is the service life of the Sprinter P6V1700?The design service life is 10 to 12 years according to EUROBAT classification “High Performance”.Does the battery require maintenance?No, the Exide Sprinter P6V1700 is maintenance-free. The AGM technology eliminates the need to top up water.Is the transport of the battery restricted?No, the battery is not subject to any transport restrictions according to IATA A67 and can be safely transported by road, rail, ship or plane.What are the advantages of AGM technology?AGM technology enables high power density, short charging times, low self-discharge and maximum safety through an internal gas recombination of 99%.
Yuasa SWL1800FR high performance battery
Yuasa SWL1800FR is a VRLA high-performance battery with 12 volts and 57.6 Ah (C20). It delivers a high short-term output of 1974 W at 10 minutes per block. Thanks to the combination of reliable performance, long service life and a flame-retardant housing, it is the ideal choice for UPS systems, emergency and security power supplies, data centres, telecommunications and industrial control systems. The "FR" in the model designation stands for the flame-retardant housing, which offers additional safety.Highlights at a glanceLong service life: Eurobat Long Life 10 to 12 years, Yuasa Service life up to 10 years at 20 °C.High capacity: 78 Ah with 20-hour discharge up to 1.75 V/cell, 72.1 Ah with 10-hour discharge up to 1.8 V/cell.Strong power output: up to 800 A for 1 second, 500 A for 1 minute.Very low impedance: less than 5 mΩ at 1 kHz for excellent load behaviour.Safe and robust: ABS housing according to UL94 V0, low pressure drain valves.Top performance for demanding applicationsWith its very low impedance and high short-term current capability, the SWL1800FR is ideal for uninterruptible power supply systems with high power density, security power supplies, communication nodes, industrial buffering and critical infrastructures. It reliably delivers peak power and a stable voltage to ensure a secure power supply even in the most demanding applications.Efficiency meets long service lifeFor standby mode, a float charge voltage of 13.65 V ±1 per cent per block (2.275 V per cell) at 20 °C is recommended, supplemented by a temperature compensation of minus 3 mV per cell and degree Celsius. No current limitation is necessary in this charging mode. For heavy charging, 14.50 V ±3 per cent per block (2.42 V per cell) is provided, with compensation of minus 4 mV per cell and degree Celsius. A current limit of 13.75 A is recommended.Technology for flexible applicationsThe wide temperature range enables versatile applications: Discharging from -20 °C to +60 °C, charging from -15 °C to +50 °C and storage from -20 °C to +50 °C. The robust housing is made of flame-retardant ABS in accordance with UL94 V0. Each cell is equipped with a low-pressure valve for safe pressure regulation. VRLA batteries must not be operated in gas-tight housings, as hydrogen gas can be produced in the event of a fault.Characteristics ModelYuasa SWL1800FR Battery typeVRLA AGM (maintenance-free, flame-retardant) Nominal voltage (V)12 Capacity (Ah)57.6 (at 20h rate) Power (W)1974 (at 10 min. to 9.6V) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cycle operation)14.5V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 10-12 years (according to EUROBAT) Dimensions (L/W/H, mm)350 x 166 x 175 Weight (kg)23 ConnectionM6 bolt CertificationsIEC 60896-21+22, VdS, UL94 V-0 FAQs about the Yuasa SWL1800FR batteryWhat is the SWL1800FR designed for?The SWL series is a VRLA series with high discharge capacity. It is ideal for applications such as UPS systems that require high short-term power. This series is designed for a long service life of 10 to 12 years in accordance with EUROBAT.What is the capacity of the battery?The nominal voltage is 12 V, with a capacity of 57.6 Ah at a 20-hour rate (C20) and 55 Ah at the 10-hour rate (C10).How much power does it deliver during high-current discharge?The typical 10-minute constant output is 1974 W per block up to 9.6 V at 20 °C.What temperature ranges and self-discharge should be considered?The recommended temperature ranges are: Storage (fully charged) from -20 °C to +50 °C, charging from -15 °C to +50 °C and discharging from -20 °C to +60 °C. Typical self-discharge is approx. 3 per cent per month at 20 °C.Can the SWL1800FR be operated in a closed housing?No, VRLA batteries emit hydrogen gas in the event of a fault. Ensure adequate ventilation and avoid operation in airtight enclosures.What is the difference between SWL and NPL?The SWL series is an advanced NPL design with an improved energy-to-density ratio and up to 40 per cent additional discharge capacity during high current discharge, making it particularly powerful.
Yuasa SWL2300FR lead-acid battery with 12V and 78Ah
The YUASA SWL2300FR impresses with high power density, compact design and reliable performance for industrial applications. Manufactured in Great Britain, this lead-acid battery provides a safe power supply for systems that require stable performance even under heavy load.Highlights at a GlanceHigh Performance: EUROBAT "High Performance Commercial" for up to 12 years of service.High Power Output: Delivers 2300 watts at 10-minute discharge down to 9.6 V.Compact Design: Space-saving with high energy density.Maintenance-Free: VRLA technology for safe, leak-proof operation.Strong Performance for Challenging EnvironmentsThe YUASA SWL2300FR is part of the proven SWL range of valve-regulated lead-acid (VRLA) batteries. It delivers an impressive 2300 watts at 10-minute constant power discharge down to 9.6 V and is ideally suited for UPS systems, emergency lighting, telecommunications systems and other industrial applications. With a maximum discharge current of 520 A for one second, it provides a stable power supply even for short load peaks.Efficient Energy and Long Service LifeThe SWL2300FR is designed for a service life of up to 10 years and meets the EUROBAT classification "High Performance Commercial" (10 to 12 years). Its low self-discharge rate of around 3% per month ensures that the battery remains operational even after long periods of inactivity. The housing made of flame-retardant ABS (UL94:V0) reliably protects the battery from external influences and provides additional safety in use.Technology for Industrial High-Performance ApplicationsThe SWL2300FR can be flexibly installed in almost any position, except permanently inverted. The M6 female thread connections ensure safe and simple installation. The recommended charging current for cyclic use is a maximum of 19.5 A, while no limit is necessary for float charge. Low-pressure relief valves reliably regulate the gas pressure inside the cells, ensuring low-maintenance operation. The SWL2300FR complies with international standards and certifications, including ISO 9001, ISO 14001, OHSAS 18001 as well as IEC61056 and IEC60896-21/22. ModelYuasa SWL2300FR Battery TypeVRLA AGM Nominal Voltage (V)12 Capacity (Ah)78 (at 20h rate) Maximum Discharge Current1300A (short-circuit current) Charging Voltage (Float Charge)13.65V (±1%) Charging Voltage (Cyclic Operation)14.5V (±3%) Operating Temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Storage Temperature (°C)-20 ~ 50 Service Lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)345 x 166 x 174 Weight (kg)28.5 ConnectionM8 thread CertificationsISO9001, ISO14001, OHSAS18001, IEC 60896-21+22, UL FAQs about the Yuasa SWL2300FR Lead 12V 78AhWhat is the expected service life of the SWL2300FR?The SWL2300FR belongs to the EUROBAT class "High Performance Commercial" and offers an expected service life of up to 12 years at 20 °C.For which applications is the battery suitable?The SWL2300FR is excellent for UPS systems, emergency lighting, telecommunications installations and other applications requiring a high short-term power output.What safety features does the SWL2300FR offer?The battery features a flame-retardant housing, low-pressure relief valves for gas pressure regulation and a maintenance-free VRLA technology for safe operation.How high is the self-discharge?The self-discharge rate is about 3% per month at 20 °C, so the battery remains ready for use even after long periods of inactivity.Which charging voltages should be observed?For standby operation, a charging voltage of 13.65 V per block (2.275 V/cell) is recommended, for cyclic operation 14.5 V per block (2.42 V/cell) at 20 °C.
Sonnenschein GF 12 050 VG – 12 V 50 Ah gel battery
The Sonnenschein GF 12 050 VG is a maintenance-free gel battery from the robust GF-V series (Light Traction). It has been specially developed for industrial use and is suitable for applications such as automated guided vehicles (AGVs), mobile lifting platforms, cleaning machines, electric pallet trucks and other electric vehicles.Highlights at a glance12 V block battery with 50 Ah (C5) and 55 Ah (C20)Up to 700 charging cycles according to IEC 60254-1Maintenance-free thanks to VRLA gel technology (no topping up with water required)Low self-discharge and long shelf lifeRobust construction for tough operating conditionsPowerful in industrial useThe GF 12 050 VG is particularly suitable for applications in intralogistics and material flow. It provides stable energy for mobile equipment and vehicles and impresses with its reliability, even during repeated charge and discharge cycles.Efficiency through VRLA gel technologyThanks to dryfit® gel technology, the battery is maintenance-free because the electrolyte is firmly bound in the gel, making it unnecessary to top up with water. This ensures maximum operational reliability and greatly minimises maintenance requirements.Robust design for long service lifeThe GF 12 050 VG features high cycle stability of up to 700 charging cycles, ensuring a long service life. Its deep discharge protection makes it particularly reliable for demanding and long-lasting industrial applications. Features ModelSonnenschein GF 12 050 VG Battery typeVRLA lead-gel (traction battery) Rated voltage (V)12 Capacity (Ah)50 (at 5h rate) Cycle lifeapprox. 700 cycles (according to IEC 60254-1) Charging voltage (cycle operation)14.1V - 14.4V MaintenanceMaintenance-free (dryfit gel) Self-dischargeVery low Dimensions (L/W/H, mm)278 x 175 x 190 Weight (kg)approx. 23.0 TerminalAutopole (conical) Base stripB13 StandardsIEC 60254-1 FAQs on the Sonnenschein GF 12 050 VG gel traction batteryFor which applications is the GF 12 050 VG particularly suitable?It is particularly suitable for industrial use, for example in automated guided vehicles, cleaning machines, mobile lifting platforms, material handling systems, electric vehicles, wheelchairs, e-scooters, golf caddies or electric boats.Is the GF 12 050 VG maintenance-free?Yes, the battery is completely maintenance-free thanks to VRLA gel technology.What is the capacity and service life of this battery?The battery has a capacity of 50 Ah (C5) or 55 Ah (C20) and achieves a service life of up to 700 charging cycles at 75% discharge according to IEC 60254-1.What are the advantages of dryfit® gel technology?It ensures maintenance-free operation, leak-proof gel electrolyte, very low gas development, long shelf life, deep discharge protection, high cycle stability, robust construction, as well as full recyclability and transport-exempt handling (e.g. IATA DGR A67).Is the battery subject to transport restrictions?No, operational VRLA batteries such as the GF 12 050 VG are exempt from transport restrictions according to IATA A67.