High-Volt

The Deye SUN-8K-SG01HP3-EU-AM2 is a highly efficient, three-phase high-voltage hybrid inverter specifically developed for maximising self-consumption in demanding residential buildings. With a rated power of 8 kW it forms the ideal interface between the photovoltaic system, high-voltage battery storage and the public power grid.The device is distinguished by its high-voltage battery support, which enables higher efficiency with lower line losses compared to low-voltage systems. It also offers a full backup power function which, in the event of a power failure, creates a genuine three-phase off-grid network and continues to power critical loads without interruption.Highlights at a glanceHigh-voltage battery system: Supports battery voltages from 160 V to 700 V, which significantly increases the efficiency of charging and discharging operations.Genuine 3-phase backup power: Provides a complete emergency power supply with 100% unbalanced load capability for all three phases in the event of a mains failure.DC and AC coupling: Flexibly deployable for planning new systems or to expand existing PV systems with a powerful storage unit.Intelligent load management: The "Smart Load" port allows targeted control of loads such as heat pumps or immersion heaters in the event of excess solar power.Fast UPS function: With a switchover time of less than 4 ms, even sensitive electronic devices such as PCs or servers remain in operation without interruption.2 MPPT trackers: Enables connection of two independently operating module strings, ideal for different roof orientations.Robust IP65 housing: Dust and splash-proof, certified for installation indoors as well as in protected outdoor areas.Areas of applicationModern detached housesPerfect for households with an electric car and heat pump, to use solar energy efficiently themselves and minimise electricity costs.Backup systems & UPSReliable safeguarding of the entire house installation against power failures thanks to powerful backup power management.Small commercial systemsUsed in small offices or workshops for reducing operating costs and safeguarding critical IT infrastructure. Installation & safety instructionsBattery compatibilityThis inverter strictly requires a high-voltage storage unit. Please check compatibility in advance with systems such as Deye BOS-G or similar high-voltage solutions.Cooling & clearancesEnsure there is sufficient air circulation. It is recommended to keep a minimum clearance of 50 cm above and below and 30 cm to the sides.Integrated protectionThe device has integrated lightning protection (type II) for DC and AC as well as a DC isolator for safe system maintenance. Features ModelDeye SUN-8K-SG01HP3-EU-AM2 Rated output power8.0 kW (8,000 watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-Ion battery Battery voltage range160 V – 800 V Number of MPP trackers2 MPPT Max. efficiency97.60 % Protection ratingIP65** (Weather resistant) Special featureBlack start capable & Smart Load  FAQs about the Deye SUN-8K-SG01HP3-EU-AM2Can I connect the inverter in parallel?Yes, up to 10 devices. By connecting in parallel, both total output power and battery capacity can be expanded modularly to meet increasing energy demands.Does the device support zero feed-in?Yes, fully configurable. With the included smart meter or external CT clamps, the inverter can be regulated so that no energy flows into the public grid.Is the WLAN monitoring module included?Yes, standard with a WLAN logger. Usually, the LSW-3 stick is included in the delivery, enabling connection to the Solarman Cloud to conveniently monitor the system via app. Scope of delivery: Deye SUN-8K-SG01HP3-EU-AM2 (8 kW HV hybrid inverter) 1 x Deye SUN-8K-SG01HP3-EU-AM2 inverterA three-phase high-voltage hybrid inverter with 8 kW output, integrated LCD touchscreen and two MPPT trackers.1 x Wall Mount BracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communications module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clamp-on current transformers for measuring the power flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty wall plugs for the proper installation of the wall bracket.1 x user manual (Operating Instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.

The Deye SUN-15K-SG01HP3-EU-AM2 is a powerful hybrid inverter with high-voltage battery support, developed for demanding photovoltaic systems. With 15 kW output, intelligent load management and a wide range of protection features, this model is ideal for energy self-sufficient applications, commercial operations or retrofit projects for existing solar installations. Highlights at a glancePowerful: 15 kW rated output with high efficiency High-voltage battery compatibility: Higher charging efficiency thanks to battery voltage up to 700 V High safety standard: Comprehensive protection functions incl. reverse polarity protection and residual current monitoring Flexible and expandable: Parallel connection of up to 10 devices possible Quiet and compact: Only 30.5 kg weight, < 55 dB noise level and wall-mountable Efficient energy conversion with high-voltage technologyThe SUN-15K-SG01HP3-EU-AM2 utilises a high-voltage battery voltage of up to 700 V, making charging and discharging processes particularly efficient. With a maximum efficiency of 97.6 % and an impressive MPPT efficiency of 99.9 %, it ranks among the most efficient devices in its class. Two MPP trackers ensure optimum energy yield even with complex module layouts.Flexibility and scalabilityWhether as part of a new energy system or for retrofitting existing PV installations: the inverter can be used flexibly. Thanks to parallel connection of up to 10 units and support of alternating current pairs, the system is suitable for a wide range of installation configurations. The intelligent charging schedule permits six individually definable time windows for battery usage.Reliability and protectionWith IP65 protection rating, extensive safety functions such as anti-islanding protection, short-circuit and overvoltage protection as well as residual current monitoring, the SUN-15K-SG01HP3-EU-AM2 is perfectly equipped for safe operation – even at extreme temperatures between -45 °C and +60 °C. Intelligent cooling ensures quiet, stable operation.Who is the Deye SUN-15K-SG01HP3-EU-AM2 suitable for?This inverter is ideal for: Private households and businesses relying on high-voltage energy storage Installers seeking flexible retrofit solutions with minimal space requirements Off-grid applications requiring diesel generator support Users with complex load profiles in need of efficient charge/discharge management Systems requiring high efficiency with a compact design ModelDEYE SUN 15K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-Ion Battery voltage range (V)160~700 Max. charging current (A)37 Max. discharging current (A)37 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)19500 Rated PV input voltage (V)1000 Start voltage (V)180 MPP voltage range (V)150-850 Full-load DC voltage range (V)420-850 Rated DC input voltage (V)600 PV input current (A)26+20 Max. PV short circuit current (A)39+30 Number of MPPT2 Strings per MPPT2+1 AC output data AC rated power and UPS power (W)15000 Max. AC output power (W)16500 AC output nominal current (A)22,8 / 21,8 Max. AC output nominal current (A)25 / 24 Max. AC output current(A)30 Max. continuous AC throughput (A)80 Peak power (without grid)1.5 x nominal power, 10 s Generator input/intelligent load/AC coupling current (A)22,8 / 80 / 22,8 Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( nominal output ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Dimensions (mm)408B×638H×237T（Without connectors and brackets） Degree of protectionIP65 Mounting styleWall mounting Warranty10 years  FAQs about the Deye Sun 15K Hybrid InverterCan I really limit grid consumption to 0 W?In the “Zero-Export-to-CT” operating mode, the inverter reduces feed-in to nearly zero. However, the current firmware allows a technical residual consumption of approx. 20 W. Users report that adjustments to Modbus registers or external energy management systems such as ioBroker can indeed achieve 0 W grid consumption. For standard applications such as full feed-in or net metering, the factory setting is usually entirely sufficient.Are the charge/discharge currents sufficient for large high-voltage batteries?Yes. According to the data sheet, the inverter allows 50 A charging or discharging current in each direction, which enables up to 20 kW output at a battery voltage of 400 V. Systems such as BYD HVS/HVM, Pylontech Force H and Dyness Tower are listed as fully compatible in the official Approved Battery List. This allows even large storage blocks to be operated quickly and in sync with the BMS.How much kWp can I connect, without the inverter clipping?On the 15 kW model, up to 30 kW PV access power and 24 kW PV input power are permitted. A typical 18 kWp PV installation results in a DC/AC ratio of 1.2, which is within the recommended oversizing range of 0.8 to 1.3. Slight clipping may occur on a few summer days but has little effect on total yield and offers valuable expansion reserves.Can I install the inverter outdoors?Yes. The device is protected against dust and water jets according to IP65, operates reliably at temperatures from –40 °C to +60 °C and tolerates 100 % humidity. For outdoor installation, the manufacturer recommends a protected, well-ventilated location to ensure unrestricted air cooling (≤ 55 dB(A)) and prevent fan blockage.Can the inverter be fully controlled via app or remote access?Yes. All relevant functions can be remotely controlled via Deye Cloud or the local SUN APP: parameter changes, firmware updates and emergency shutdowns are no problem. The app manual guides you step by step through the Wi-Fi setup including connection using the internal hotspot network. RS485, CAN, LAN and 4G sticks are also available for connecting external EMS solutions.  Scope of delivery: Deye Sun 15K-SG01HP3-EU-AM2 Three-phase Hybrid Inverter 15KW 1 x Deye SUN-15K-SG01HP3-EU-AM2 InverterA three-phase high-voltage hybrid inverter with 15 kW output, integrated LCD touchscreen and two MPPT trackers.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.3 x Current Transformer (CT)External clamp current transformers for measuring energy flows at the house connection, required for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4 compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage.1 x communication cable (BMS)A prefabricated RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and plugs)A set of stainless steel screws and heavy-duty plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety notes.

The Deye SUN-20K-SG01HP3-EU-AM2 is a powerful three-phase hybrid inverter with high-voltage battery compatibility. It impresses with high efficiency, flexible application options and maximum scalability – ideal for demanding solar installations in residential and commercial projects.Highlights at a glance20 kW rated output & high-voltage battery compatibility for maximum efficiency Up to 10 devices connectable in parallel, ideal for modular large-scale systems 100 % unbalanced output, each phase individually usable 6 freely adjustable charging/discharging time windows for smart energy management Robust IP65 housing & support for diesel generatorsEfficient energy conversion with high-voltage technologyThe SUN-20K-SG01HP3-EU-AM2 uses high-voltage lithium-ion batteries (160–700 V), enabling particularly high charging and discharging efficiency. With an MPPT efficiency of 99.9 % and a maximum efficiency of 97.6 %, it ensures optimal utilisation of the available solar energy even under variable weather conditions.Flexibility and scalabilityThanks to the possibility of parallel connection of up to 10 devices, the inverter is suitable for both complex new builds and retrofitting larger systems. Two independent MPP trackers each with two inputs optimise energy yields across multiple module arrays. Six freely definable time windows for charging and discharging the battery provide maximum control and adaptability.Reliability and protectionThe inverter is equipped with comprehensive protection mechanisms including reverse polarity protection, anti-islanding operation, insulation and short-circuit monitoring, and overvoltage protection. The IP65 protection class enables safe outdoor use, whilst smart cooling and quiet operation (< 55 dB) ensure low-maintenance running.Who is the Deye SUN-20K-SG01HP3-EU-AM2 suitable for?This inverter is ideal for: Businesses with high energy and storage demands Homeowners seeking maximum independence with high-voltage technology Installers planning flexible, future-proof systems Project developers realising AC-coupled retrofitting solutionsOff-grid systems with diesel generators or hybrid operations  ModelDEYE SUN 20K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-lon Battery voltage range (V)160~700 Max. charging current (A)37 Max. discharging current (A)37 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)32000 Rated PV input voltage (V)1000 Start voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)26+26 Max. PV short circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated output & UPS power (W)20000 Max. AC output power (W)22000 AC rated output current (A)30,4 / 29 Max. AC rated output current (A)33,4 / 31,9 Max. continuous AC throughput (A)80 Peak output (without grid)1.5x rated power, 10 S Generator input/intelligent load/AC coupling current (A)30,4 / 80 / 30,4 Output power factor0.8 leading to 0.8 lagging Output frequency & voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated output ) DC injection<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at PV string input, insulation resistance detection, differential current monitoring unit, output overcurrent protection, output short circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Size (mm)408B×638H×237T（Without connectors and brackets） Protection classIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye Sun 20K High-Voltage Hybrid InverterWhich grid codes are stored in the inverter?The inverter contains all common grid codes, which can be switched directly in the menu “Setting → Grid”. These include VDE-AR-N 4105 for Germany, EN 50549 for the EU, CEI 0-21 for Italy, G98 and G99 for Great Britain, OVE R25 for Austria, RD 1699 and RD 14 for Spain, as well as NRS 097-2-1 for South Africa. As a rule, no additional NA protection is required as soon as the appropriate country profile has been activated.Which high-voltage batteries are compatible and how do I set up the BMS correctly?The approved storage solutions include BYD HVS and HVM, Pylontech Force H1 and H2, Dyness Tower, as well as the Deye GB-L Series. Each storage is assigned a specific setup number, which is selected in the menu “Battery → Lithium → Setup Number”. Alternatively, the same number can be set using the DIP switches on the battery. Other models follow the same procedure and are listed in the compatibility list.How much PV output can be connected without inverter clipping?According to the data sheet, up to 30 kW DC input is permitted, while the AC output is 20 kW. This gives a DC/AC ratio of 1.5. In practice, a ratio of 1.1 to 1.2 is recommended, which equates to around 22 to 24 kWp. Even with 26 to 28 kWp, only minor losses due to clipping occur on a few days according to experience.How loud is the inverter during operation?In standby operation, the inverter remains almost silent as the fans only start at temperatures above 50°C or under sustained load. In normal operation, the noise level is below 45 decibels. Under full load, a clear airflow noise can be heard, but it stays below the maximum sound pressure of 55 decibels, as specified by the manufacturer. The device is therefore well suited for basements and technical rooms.Can settings and firmware updates be carried out via app?Via the Deye Cloud or the SUN-APP, all settings can be managed remotely. This includes changes to charging and export parameters, firmware updates for inverter, BMS, and HMI as well as an emergency shutdown. Connection is established via WiFi, LAN, or the factory hotspot network. RS485, CAN, and 4G sticks are also available for integrating external systems. Scope of delivery: Deye SUN-20K-SG01HP3-EU-AM2 (20 kW HV Hybrid Inverter) 1 x Deye SUN-20K-SG01HP3-EU-AM2 inverterA powerful three-phase high-voltage hybrid inverter with 20 kW output, integrated LCD touchscreen, and two MPPT trackers.1 x Wall Mount BracketA solid metal mounting rail for safe installation of the heavy device on a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for Internet connection for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clamp current transformers to measure the power flows at the house connection, necessary for zero export and self-consumption optimisation.1 x set of PV connectors (MC4 compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and battery management system.1 x mounting kit (screws and plugs)A set of stainless steel screws and heavy-duty wall plugs for correct installation of the wall mount.1 x user manualA printed manual containing detailed installation instructions, diagrams and safety notes.

The Deye SUN-25K-SG01HP3-EU-AM2 is a powerful, three-phase hybrid inverter with high-voltage battery compatibility. It was specially developed for demanding PV applications in residential and commercial areas and impresses with its high efficiency, flexible application options and robust design.Highlights at a glanceHigh rated power: 25 kW for high-performance PV systems in residential and commercial areas.AC and DC coupling: Enables the retrofitting of existing solar systems and the flexible integration of battery storage systems.High efficiency: A maximum efficiency of 97.6 % and an MPPT efficiency of over 99 % ensure maximum energy yield.Scalable: Up to 10 units can be connected in parallel for on-grid and off-grid operation, allowing flexible system expansion.Intelligent monitoring: The smart functions enable remote monitoring and maintenance, including the remote setting of parameters and firmware updates.Comprehensive safety: Equipped with various protection mechanisms, including overvoltage, overcurrent and earth fault protection.Efficient energy conversion with high-voltage technologyWith a maximum DC input power of 32,500 W and an MPPT efficiency of 99.9 %, the SUN-25K achieves outstanding performance. The intelligent MPPT control ensures high yields even with shading or unevenly aligned module fields. The inverter is optimised for high-voltage lithium-ion batteries (160–700 V), which enables particularly high charging and discharging efficiency.Flexibility and scalabilityWhether grid-connected, hybrid or off-grid: the inverter offers flexible application options. The AC and DC coupling makes it easy to retrofit existing solar systems. The parallel connection of up to 10 devices and two separate battery inputs offer scalable solutions for growing energy requirements. With six freely definable time windows for charging and discharging the battery, the energy can be utilised or stored in a targeted manner. Reliability and protectionThanks to the IP65 protection class and intelligent cooling, operation is guaranteed even under demanding conditions. Safety functions such as reverse polarity, overvoltage, short-circuit and residual current protection ensure maximum operational safety. The certifications in accordance with VDE-AR-N 4105, EN 50549 and other international standards confirm the high quality of the device. Who is the Deye SUN-25K-SG01HP3-EU-AM2 suitable for? This inverter is ideal for:Commercial operations with high energy requirements and storage needsHomeowners aiming for maximum self-sufficiency with high-voltage technologyInstallers planning flexible, future-proof systemsProject developers who implement AC-coupled retrofit solutions  ModelDEYE SUN 25K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-lon Battery voltage range (V)160~700 Max. Charging current (A)50 Max. Discharge current (A)50 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)40000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Full load DC voltage range (V)500-850 Rated DC input voltage (V)700 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)25000 Max. AC output power (W)27500 Rated AC output current (A)37,9 /36,3 Maximum rated AC output current (A)41,7 / 39,9 Max. Continuous AC throughput (A)80 Peak power (without mains)1.5 times the rated power, 10 S Generator input / intelligent load / AC coupling current (A)30,4 / 80 / 30,4 Output power factor0,8 leading to 0,8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current supply<0,5% ln Efficiency Max. Efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, overcurrent protection output, short-circuit protection output, overvoltage protection output Overvoltage categoryDC Type II/AC Type III Certifications and standards Mains approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Size (mm)408B×638H×237T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Guarantee10 years  FAQs about the Deye SUN-25K-SG01HP3-EU-AM2Which grid codes are stored in the inverter?The inverter contains all common grid codes, which can be changed directly in the "Setting → Grid" menu. These include VDE-AR-N 4105 for Germany, EN 50549 for the EU and CEI 0-21 for Italy. As a rule, no additional NA protection is required as soon as the appropriate country profile has been activated.Which high-voltage storage systems are compatible and how do I set up the BMS correctly?The approved storage solutions include BYD HVS and HVM, Pylontech Force H1 and H2, Dyness Tower and the Deye GB-L Series. Each storage system is assigned a specific setup number, which is selected in the "Battery → Lithium → Setup Number" menu. Alternatively, the same number can be set using the DIP switches on the battery.How much PV power can I connect without the inverter clipping?According to the data sheet, up to 32,500 W DC input power is permitted, while the AC output power is 25 kW. This results in a DC/AC ratio of 1.3. In practice, a ratio of 1.1 to 1.2 is recommended, which corresponds to around 27.5 to 30 kWp.How loud is the inverter in operation?In standby mode, the inverter remains virtually silent as the fans only start up when required. In normal operation, the noise level is below 55 decibels, as specified by the manufacturer. The device is therefore well suited for basements and utility rooms.Can settings and firmware updates be carried out via app?Yes, all settings can be controlled remotely via the Deye Cloud or the SUN APP. This includes changes to charging and export parameters, firmware updates for inverters, BMS and HMI as well as a possible emergency shutdown of the device. The connection is made via WLAN, LAN or the factory hotspot network. Scope of delivery: Deye SUN-25K-SG01HP3-EU-AM2 (25 kW HV hybrid inverter) 1 x Deye SUN-25K-SG01HP3-EU-AM2 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 25 kW output, integrated LCD touchscreen and three MPPT trackers for demanding photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-30K-SG01HP3-EU-BM3 is a versatile hybrid inverter with high output power, three MPP trackers and high-voltage battery support. It was specially developed for demanding PV applications in commercial operations, apartment blocks or off-grid systems and impresses with its efficiency, flexibility and robust design.Highlights at a glance:30 kW nominal power and 33 kW peak power For medium to large systems 3 MPPT with 6 PV strings for maximum yield optimisation Two high-voltage battery inputs with 50 A charge/discharge current each Parallel connection of up to 10 devices for modular system solutions Supported Mains-independent operation with diesel generators Efficient energy conversion for demanding applicationsWith a maximum DC input power of 39,000 W, three independent MPPTs and an MPPT efficiency of 99.9 %, the SUN-30K achieves outstanding performance. The intelligent MPPT control ensures high yields even with shading or unevenly aligned module fields.Flexibility and scalabilityWhether grid-connected, hybrid or completely off-grid - the inverter offers flexible application options. The parallel connection of up to 10 devices, AC coupling and two separate battery inputs enable scalable energy storage systems with high-voltage lithium-ion batteries (160-800 V). The energy can be utilised or stored in a targeted manner via six adjustable charging/discharging windows.Reliability and protectionThanks to protection class IP65, intelligent cooling (< 65 dB) and safety functions such as reverse polarity, overvoltage, short-circuit and residual current protection, operation is guaranteed even under demanding conditions. The certifications in accordance with VDE, IEC and other international standards ensure use in the European market.Who is the Deye SUN-30K-SG01HP3-EU-BM3 suitable for?This inverter is ideal for: Commercial PV systems with medium to high energy requirements Apartment blocks with a high proportion of self-consumption PV projects with storage expansion via high-voltage batteries Hybrid solutions with diesel generators for maximum supply reliability Installers looking for a reliable solution for large modular systems  ModelDEYE SUN 30K-SG01 HP3-EU-BM3 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. Charging current (A)50+50 Max. Discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)48000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 Number of MPPT3 Strings per MPPT2 + 2 + 2 AC output data AC rated power and UPS power (W)30000 Max. AC output power (W)33000 Rated AC output current (A)45,5 / 43,5 Max. AC output current (A)50 / 47,8 Max. Continuous AC throughput (A)200 Peak power (without mains)1.5 times the rated power, 10 SS Output power factor0.8 leading to 0.8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current supply<0.5% ln Efficiency Max. Efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, overcurrent protection output, short-circuit protection output, overvoltage protection output Overvoltage categoryDC Type II/AC Type III Certifications and standards Mains approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527W×894H×294T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Guarantee10 years  FAQs about the Deye Sun 30K high-voltage hybrid inverterDo I need external NA protection?No. The 30 kW BM3 series has an integrated anti-islanding protection circuit that meets the requirements of the applicable standards such as VDE-AR-N 4105. Separate NA protection is not required.Which high-voltage storage systems are approved?According to the official compatibility list (version DY-HV 160-800-017), BYD HVS/HVM, Pylontech Force H (H1/H2), Dyness Tower and the Deye GB-L series, among others, are fully compatible. The connection is made via CAN or RS485, depending on the system.How much kWp can I connect without major losses?Technically, up to 65 kW DC input power is permitted; according to the manufacturer, the maximum PV access power is 100 kW. A DC/AC ratio of 1.2 to 1.3 - i.e. around 60 to 65 kWp - is considered practical. Even on midsummer days, experience has shown that the yield loss due to clipping is less than two per cent on an annual average.How many strings and MPPTs are available?The inverter offers four independent MPP trackers (MPPT), each with two DC inputs. This means that a total of eight string connections are available, particularly suitable for complex roof orientations with different module inclinations and directions.Can I connect several 30 kW devices?Yes, up to ten inverters can be connected in parallel in on-grid or off-grid operation. One device assumes the master function, reads the CT sensors and controls the other units in the network. Scope of delivery: Deye SUN-30K-SG01HP3-EU-BM3 (30 kW HV hybrid inverter) 1 x Deye SUN-30K-SG01HP3-EU-BM3 inverterA powerful three-phase high-voltage hybrid inverter with 30 kW output, integrated LCD touchscreen and three MPPT trackers for large commercial or demanding private photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar systems with high energy requirements. With 50 kW rated power, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, ideal for large PV projects, industrial applications and off-grid supply systems.Highlights at a glancePowerful: 50 kW rated power and 55 kW maximum output power Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100 % unbalanced output usable per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large systemsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6 %, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9 % ensures optimum power yield even with partial shading or heterogeneous module fields.Flexibility and scalabilityThis inverter can be used in systems with up to 10 devices connected in parallel, making it particularly suitable for large modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with powerful storage systems. The six programmable charge/discharge time windows offer intelligent energy management for self-consumption and grid relief.Reliability and protectionWith IP65 protection class and comprehensive safety functions such as reverse polarity protection, residual current monitoring and overvoltage protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. The intelligent cooling system ensures quiet operation (< 65 dB) even at high power.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial plants with very high energy consumption Large-scale projects with multiple battery storage systems and module fields Installers who want to realise future-proof high-voltage systems Off-grid installations with diesel generator connection Grid-parallel storage solutions with intelligent load management  ModelDEYE SUN 50K-SG01 HP3-EU-BM4 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. charging current (A)50+50 Max. discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of PV string Max. DC input power (W)80000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 + 55 Number of MPPT4 Strings per MPPT2 + 2 + 2 + 2 AC output data AC rated power and UPS power (W)50000 Max. AC output power (W)55000 AC output rated current (A)75,8 / 72,5 Max. AC output current (A)83,4 / 79,8 Max. continuous AC throughput (A)200 Peak power (without grid)1.5 times rated power, 10 S Generator input/intelligent load/AC coupling current (A)75,8 / 200 / 75,8 Output power factor0,8 leading to 0,8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527B×894H×294T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Warranty10 years  FAQs about the Deye Sun 50K Hybrid inverterDo I need external NA protection from 50 kW?No. The inverter has an integrated anti-islanding circuit and fulfils all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage storage systems are approved?Officially compatible models include BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The appropriate setup number is entered directly in the menu “Battery → Lithium → Setup Number” or set via DIP switches. According to the provider, other storage solutions such as BOS-G are already preconfigured.How many kWp can I connect without clipping?According to the data sheet, the maximum DC input power is 65 000 W. The manufacturer even provides for up to 100 000 W PV access power, which results in a DC/AC ratio of 1.3. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit can low clip losses occur on a few high-load days, which remain below two per cent over the course of the year.Can I connect several 50-kW devices in parallel?Yes. Up to ten inverters can be operated in parallel, both grid-connected and off-grid. One device assumes the master function including CT sensor connection, the other units follow automatically in the network.Do I need special ventilation?Active climate technology is not required. The inverter works with intelligent air cooling and is designed for ambient temperatures up to 60 °C. The maximum noise level is 65 dB(A) under full load, in standby mode the device remains virtually silent. Good air circulation is important, for example in a ventilated technical room or in a protected outdoor location. The fan inlets and outlets must remain unobstructed, otherwise charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 50 kW power, integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial device to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT - Current Transformer)External split core current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation at high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the massive wall bracket.1 x operating manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety instructions.

The Deye SUN-80K-SG02HP3-EU-EM6 is a three-phase high-performance hybrid inverter for large photovoltaic projects in commercial and industrial environments. With up to 80 kW rated output, high-voltage battery support and comprehensive protection functions, it guarantees maximum efficiency, flexibility and operational safety, both in grid operation and off-grid.Highlights at a glanceHigh performance: 80 kW rated output, up to 88 kVA peak outputFlexible battery usage: High-voltage batteries (160–1000 V), max. charging/discharging current 160 AParallel connection: Up to 10 units for large-scale projects (on-grid & off-grid)Efficient PV integration: Max. PV input power 160 kW, up to 12 MPP trackersIntelligent control: 6 programmable time windows for charging/dischargingNetworked & controllable: Communication via RS485, RS232, CAN, optional WLAN/GPRS/4GEfficient High-Performance Energy ConversionThe SUN-80K-SG02HP3-EU-EM6 achieves an efficiency of up to 97.6% as well as an MPPT efficiency of over 99%. This ensures maximum utilisation of solar energy. The support for high-voltage batteries further increases overall efficiency and reduces line losses.Flexibility Through Parallel ConnectionFor particularly large projects, up to 10 units can be connected in parallel. This enables the implementation of large-scale PV systems in the commercial and industrial sector with highest reliability and scalability.Intelligent Battery UsageThe inverter offers six freely programmable time windows for charging and discharging operations. Besides PV systems, diesel generators can also be integrated for battery charging—a decisive advantage for stand-alone grids or critical infrastructure.Comprehensive Safety and Protection FunctionsThe Deye SUN-80K-SG02HP3-EU-EM6 meets international grid and safety standards (incl. IEC 62116, EN 50549, VDE-AR-N 4105). Integrated protective mechanisms such as overvoltage, short-circuit, earth fault and anti-islanding protection ensure reliable operation around the clock.Who is the Deye SUN-80K-SG02HP3-EU-EM6 Suitable For?This model is ideal for:Large commercial and industrial facilities with high energy demandOperators of large-scale PV systems with self-consumption optimisationCritical infrastructures that require reliable emergency power supplySystem integrators with megawatt-scale projectsProperties  ModelDeye SUN-80K-SG02HP3-EU-EM6 Battery input data Battery typeLithium-ion (High voltage) Battery voltage range (V)160~1000 Max. charge current (A)80+80 Max. discharge current (A)80+80 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)128000 Rated PV input voltage (V)650 Start voltage (V)180 MPP voltage range (V)150-850 PV input current (A)36+36+36+36+36+36 Max. PV short-circuit current (A)54+54+54+54+54+54 Number of MPPT6 Strings per MPPT2+2+2+2+2+2 AC output data AC rated power and UPS output (W)80000 Max. AC output power (W)88000 Max. continuous AC throughput (A)200 Output frequency and voltage50/60Hz; 3L/N/PE 220/380Vac, 230/400Vac Grid typeThree-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)80 Size (mm)606W x 927H x 314D Degree of protectionIP65 Warranty10 years  FAQs about the Deye SUN-80K-SG02HP3-EU-EM6 Hybrid InverterWhich batteries is the 80 kW inverter compatible with?The Deye SUN-80K-SG02HP3-EU-EM6 inverter supports high-voltage batteries in the voltage range from 160 to 1000 V and automatically communicates with the BMS.Can several units be operated in parallel?Yes, up to 10 units can be connected in parallel, both grid-connected and off-grid.What protection functions are integrated in the 3-phase inverter?The system has comprehensive protective mechanisms such as overvoltage, short-circuit, ground fault and anti-islanding protection as well as optional arc fault detection (AFCI).Is the inverter suitable for retrofitting?Yes, thanks to AC coupling, it can easily be integrated into existing solar systems.What warranty applies to the device?The manufacturer's warranty is 5 to 10 years, depending on installation location. Scope of Delivery: Deye SUN-80K-SG02HP3-EU-EM6 (80 kW HV Hybrid Inverter) 1 x Deye SUN-80K-SG02HP3-EU-EM6 inverterA high-performance hybrid inverter for industrial applications with 80 kW AC output and support for large-scale high-voltage battery systems.1 x Wall Mount BracketA reinforced metal mounting rail specially designed for the high inherent weight of this industrial device.1 x Wi-Fi / LAN stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x Current Transformer (CT)External clamp-on current transformers for precise measurement of energy flows at the domestic or commercial connection, necessary for energy management.1 x set of PV connectors (MC4-compatible)The full set of DC connector pairs (plus and minus) for connecting the numerous PV strings to the MPPT inputs.1 x set of battery connection accessories (High voltage)Special high-voltage terminals or connectors for safe electrical connection of a compatible HV storage system.1 x Communication Cable (BMS)A prefabricated data cable for communication between the inverter and the battery management system.1 x Mounting Kit (screws and anchors)A set of stainless steel screws and heavy-duty anchors for proper installation of the robust wall bracket.1 x User Manual (user manual)A comprehensive manual with technical specifications, circuit diagrams, installation instructions and safety information.

Highlights at a glanceMassive power: 100 kW rated power for large solar installations in commerce, industry and solar parksMaximum efficiency: Peak efficiency up to 98.7% for highest yieldsFlexible design: Up to 6 MPP trackers for optimised energy yield with different module layoutsRobust design: Protection class IP65 for use under demanding environmental conditionsIntelligent connectivity: Extensive monitoring and communication options via RS485, Wi-Fi, Ethernet and optional GPRS/4GComprehensive protection: Integrated safety functions including overvoltage protection, short-circuit and residual current monitoringEfficient energy conversion for modern requirementsThe Deye SUN-100K-G03 has been specifically developed for the high demands of modern, large-scale photovoltaic systems. With three-phase output power and a maximum efficiency of up to 98.7%, the inverter ensures that a maximum proportion of the generated direct current is converted into grid-compliant alternating current, with minimal losses. Thanks to support for a wide MPPT voltage range from 200 V to 850 V, the system remains efficient under different irradiation conditions.Flexibility and scalabilityThanks to its up to 6 independent MPP trackers, the Deye SUN-100K-G03 enables optimal adaptation to differently oriented solar module fields or partial shading. This makes it ideal for complex rooftop installations or ground-mounted systems with variable module layouts. In addition, the robust technical design allows flexible system configuration for a wide variety of project requirements.Reliability and protectionWith its IP65 protection rating, the inverter is optimally protected against dust and water. High-quality components, a wide operating temperature range from -25 °C to +60 °C (with power derating above 45 °C) as well as an intelligent air cooling system ensure long-lasting and stable operation, even under demanding conditions. Integrated protection mechanisms such as overvoltage and short-circuit protection, anti-islanding function and residual current monitoring guarantee maximum safety for the system and the grid.Who is the Deye SUN-100K-G03 suitable for?This inverter is ideal for: Operators of large solar installations who focus on maximum energy yields and high profitabilityCommercial businesses and industries with high self-consumption or full feed-in to the gridSolar park operators who rely on reliable performance and extensive monitoring functionsAgricultural businesses with large energy needs and area potential for PV installations  ModelDEYE SUN 100K-G03 Input data of the PV strings Max. DC input power (W)150000 Max PV input voltage (V)1000 Starting voltage (V)250 MPPT voltage range (V)200-850 Full load MPPT voltage range (V)500-850 PV input current (A)40+40+40+40+40+40 Max. PV short-circuit current (A)60+60+60+60+60+60 Number of MPPT6 Strings per MPPT4+4+4+4+4+4 AC output data AC rated power and UPS power (W)100000 Max. AC output power (W)110000 AC output rated current (A)151.5/144.9 Maximum AC output rated current (A)166.7/159.4 Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency98,80% Euro efficiency98.20% MPPT efficiency99,90% Protection Overvoltage categoryDC Type II/AC Type II Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, CEI 0-16, EN 50549, NRS 097, RD 140,UNE 217002, OVE Guideline R25, G99, VDE-AR-N 4105, VDE-AR-N 4110 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-25~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; RS232 Weight (kg)81 Size (mm)824B×516H×312.7T Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs about the 100 kW Deye three-phase string inverterHow many MPP trackers does the inverter have?The Deye SUN-100K-G03 features up to 6 independent MPP trackers, ideal for complex system layouts.What is the device's maximum efficiency?The inverter achieves an impressive maximum efficiency of up to 98.7%.What voltage range does the MPPT support?The MPPT voltage range is between 200 V and 850 V, allowing a wide range of module configurations.Can the inverter also be operated at high ambient temperatures?Yes, it is suitable for temperatures from -25 °C to +60 °C. Above 45 °C, the power is gradually derated to protect the lifespan.Does the inverter provide integrated protection mechanisms?Yes, the SUN-100K-G03 features comprehensive protection functions including overvoltage protection (DC/AC), short-circuit and residual current monitoring, anti-islanding and more. Scope of delivery: Deye Sun SUN-100K-G03 Three-phase string inverter 100KW 1 x Deye SUN-100K-G03 inverterThree-phase device with an AC output power of 100 kW, equipped with multiple MPP trackers for maximum efficiency in industrial applications.1 x Wall Mounting BracketA reinforced mounting rail specially designed for the high weight of the device for safe wall or frame installation.1 x Wi-Fi / LAN / GPRS Stick (Data Logger)A plug-and-play communication module for remote monitoring of system data and performance values via the Deye Cloud or app.1 x set of DC connection plugs (MC4-compatible)The full number of PV connector pairs (plus and minus) for connecting all strings to the DC inputs of the inverter.1 x set of mounting materialIncludes stainless steel screws to secure the housing to the bracket and heavy-duty expansion bolts for firm installation into the substrate.1 x Operating and Installation ManualA detailed manual with technical specifications, wiring diagrams, installation instructions and safety information.1 x Warranty CardThe official document for product registration and claiming manufacturer's warranty rights.

The Deye SUN-12K-SG01HP3-EU-AM2 is a powerful, three-phase high-voltage hybrid inverter designed as a highly efficient energy management system for demanding photovoltaic systems. With a nominal output power of 12 kW it offers sufficient reserves for modern households with high electricity requirements, electric cars and heat pumps.The main feature of the AM2 series is the support of High-voltage battery systems. Operating in the voltage range of up to 700 V minimises conversion losses and significantly increases system efficiency compared to low-voltage systems. The device also enables a fully-fledged, three-phase backup power supply with extremely fast switchover times.Highlights at a glanceHigh-voltage efficiency: Supports battery voltages from 160 V to 700 V, which enables thinner cable cross-sections and higher efficiency.Genuine 3-phase emergency power: In the event of a power failure, continues to supply the entire domestic grid with three-phase power and is 100% unbalanced load capable.High PV input power: Enables the connection of up to 15.6 kWp photovoltaic power for fast battery charging and direct load supply.Smart Load & Generator-Port: A flexible output for the intelligent control of consumers (e.g. hot water) or for integrating a diesel generator.Fast UPS function: With a switching time of less than 4 ms, IT devices and household appliances remain in operation without interruption.Robust IP65 design: Dust and waterproof housing, ideal for installation in basements, garages or protected outdoor areas.Colour touchscreen: Intuitive configuration and monitoring of all energy flows directly on the device via an LCD display.Areas of applicationModern detached housesPerfect for combining with heat pumps and wallboxes to maximise self-consumption.Commercial PV systemsProtection of critical three-phase loads (e.g. cold stores or workshop machines) in the event of a power failure.Retrofitting (AC coupling)Can be integrated into existing PV systems as a storage retrofit without having to replace the old inverter.Assembly & safety instructionsBattery compatibilityThis inverter requires a high-voltage storage system. Please refer to the certified compatibility list (e.g. Deye BOS-G or BYD HVS/HVM).Fire protection & locationInstall the inverter on a non-flammable surface. Ensure a minimum distance of 50 cm from ceilings and floors for optimum circulation.Overvoltage protectionThe device has integrated DC and AC surge arresters (type II). Additional external protection in accordance with local regulations is recommended. Properties ModelDeye SUN-12K-SG01HP3-EU-AM2 Nominal output power12 kW (12,000 watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) lithium-ion Battery voltage range160 V – 700 V Number of MPP trackers2 MPPT Max. Efficiency97,60 % Protection classIP65 (dust and waterproof) Special featureBlack start capable & smart load function  FAQs about the Deye SUN-12K-SG01HP3-EU-AM2Can the inverter be operated in parallel?Yes, up to 10 devices. Thanks to the parallel connection, both the total output power and the storage capacity can be modularly adapted to growing requirements.Does the device support zero feed-in?Yes, precisely controllable. Using the enclosed smart meter, the inverter can be configured so that no energy flows into the public grid (zero export).Is the monitoring module included?Yes, a WLAN stick as standard. The LSW-3 data logger, which connects the system to the Solarman cloud and enables remote monitoring via app, is usually included in the scope of delivery. Scope of delivery: Deye SUN-12K-SG01HP3-EU-AM2 – 12 kW / 3-phase hybrid inverter (high-voltage) 1 x Deye SUN-12K-SG01HP3-EU-AM2 inverterA three-phase high-voltage hybrid inverter with 12 kW output, integrated LCD touchscreen and two MPPT trackers.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT - Current Transformer)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (User Manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-10K-SG01HP3-EU-DM2 is a powerful, three-phase high-voltage hybrid inverter that serves as the heart of modern photovoltaic systems in detached houses. With an AC output power of 10 kW it enables highly efficient energy use through the combination of solar power generation, intelligent battery charging and a reliable emergency power supply.This model of the SG01 series is specifically optimised for operation with high-voltage battery storage. The higher system voltage minimises conversion losses, which increases the overall efficiency of your system. Whether you want to optimise self-consumption, achieve zero feed-in or run in off-grid mode – this inverter offers the right solution for every scenario.Highlights at a glanceHigh-voltage battery support: Compatible with storage systems in the range of 160 V to 700 V, which ensures maximum efficiency during charging and discharging.100% unbalanced load capability: Each of the three phases can be loaded independently with up to 100% of the rated output—ideal for uneven household consumption.2 MPPT trackers: Enables flexible design of two module strings for optimal yields even with different roof pitches or partial shading.UPS function (backup): Guarantees an uninterrupted power supply in case of grid failure with an extremely fast switchover time of less than 10 ms.Smart Load & AC coupling: Intelligent output for controllable loads (e.g. heat pump) and the option to integrate existing PV inverters into the system.Colour touch display: Simple configuration and visualisation of all performance data directly on the device through a user-friendly interface.Parallel operation: Supports parallel operation of up to 10 units to scale the system capacity as needed in the future.Areas of applicationThe SUN-10K is the all-rounder for the modern home:Detached houses with storagePerfectly matched to high-voltage batteries such as the Deye BOS-A series or Pylontech Force H2 to maximise the degree of self-sufficiency.Emergency power backupReliably protects important household devices such as heating pumps, refrigerators and lighting against power failures.Sector couplingIntelligent control of wallboxes or hot water heating elements via the Smart Load contact when there is a solar surplus.Installation & safety notesBattery compatibilityEnsure that only certified high-voltage storage units are connected. Communication is via the BMS port (CAN/RS485).Heat dissipationInstall the device in a cool, well-ventilated location. Although it is IP65-certified, installing it in a location protected from direct sunlight will extend the life of the components.Protective devicesThe system features integrated DC disconnect switches and a Type II DC surge protector to protect the installation against lightning damage and faults. Properties ModelDeye SUN-10K-SG01HP3-EU-DM2 AC rated output10,000 W (10 kW) Max. DC input power13,000 W Battery voltage range160 V – 800 V (high voltage) Number of MPPT2 (with 2+1 strings) Max. efficiency97.60 % Protection classIP65 (suitable for outdoor installation) CommunicationRS485, CAN, Wi-Fi / Ethernet Warranty10 years (manufacturer dependent)  FAQs on the Deye SUN-10K-SG01HP3Can I operate this inverter with 48V batteries?No.This model is a high-voltage hybrid (HP3). For 48V low-voltage storage, you need the LP3 series from Deye. Operating with the wrong battery voltage can cause damage.Do I need a separate smart meter for zero feed-in?Generally no.Deye usually supplies the appropriate 3-phase smart meter (e.g. Eastron) directly with these hybrid models so the inverter can record the household consumption at the grid connection point.Is the Wi-Fi module included?Yes.A Wi-Fi dongle for integration into the Solarman app or the Deye Cloud Portal is included as standard to enable global monitoring of the system.Can the inverter control a heat pump?Yes.Via the programmable Smart Load output, a signal can be sent to the heat pump (SG-Ready) to store thermal energy when there is sufficient solar output or the battery is full.

The Deye SUN-30K-SG02HP3-EU-AM3 is one of the most powerful three-phase high-voltage hybrid inverters for the commercial and demanding private sector. With a rated output of 30 kW, it serves as a central energy hub that intelligently interconnects photovoltaics, battery storage and the public grid. It is specifically designed to handle large loads while ensuring maximum independence via state-of-the-art storage technology.Thanks to the AM3 platform, this model supports extremely high PV input currents, ensuring compatibility with the latest high-performance solar modules (bifacial or large-format cells). The high-voltage battery system achieves superior energy conversion efficiency and makes the system the ideal choice for sector coupling (PV, heat, mobility).Highlights at a glanceEnormous 30 kW output: Sufficient capacity for commercial enterprises, agriculture or large apartment complexes with high energy demands.High-voltage battery support: Operates in the voltage range of 160 V to 800 V, improving efficiency and reducing installation costs with smaller cable cross-sections.3 MPPT trackers: Allowing flexible configuration of up to three different roof areas or orientations to optimise yield over the whole day.High-current PV input: The AM3 series is optimised for modern PV modules with high input current (up to 36 A per MPPT).True 3-phase emergency power: Provides complete backup power for the entire building with 100% unbalanced load capability in the event of a grid outage.Smart Load & Generator Port: A multifunctional connection for targeted control of high consumption loads (e.g. air conditioners) or integrating an external generator.Robust IP65 housing: Dust-tight and protected against water jets for reliable installation indoors and outdoors.Areas of applicationCommercial & IndustrialReduction of load peaks (peak shaving) and securing critical infrastructure during power failures.Agricultural operationsSupplying energy-intensive equipment such as milking machines, fans, or cooling systems with large-scale PV use.Neighbourhood solutionsCentral inverter for tenant electricity models in conjunction with heat pump cascades and EV charging infrastructure.Mounting & safety notesMassive constructionDue to its weight of 80 kg, installation must be carried out on a load-bearing wall by at least two professionals. Adequate ventilation is imperative for active cooling.Battery systemThe cell is optimised for high-voltage storage racks (e.g. Deye BOS-G Series). Correct communication between BMS and inverter via CAN/RS485 is essential for safe operation.Grid connectionConnection to the public grid and commissioning must be performed by a certified electrician to ensure compliance with local guidelines (e.g. VDE-AR-N 4105). Properties ModelDeye SUN-30K-SG02HP3-EU-AM3 Nominal output30 kW (30,000 Watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-Ion Battery voltage range160 V – 800 V Number of MPP trackers3 MPPT Max. efficiency97.60 % Degree of protectionIP65 (Weatherproof) Special featureSupports parallel operation of up to 10 units  FAQs about the Deye SUN-30K-SG02HP3-EU-AM3Can the inverter be operated in parallel?Yes, up to 10 devices. This enables commercial storage solutions on a megawatt-hour scale, with both output and storage capacity scalable in modules.Does the device support zero export?Yes, precisely configurable. Using the supplied smart meter, the inverter can be configured to ensure no energy is fed into the public grid (Zero Export function).How is the system monitored?Via Solarman Cloud. A WLAN or LAN logger is included as standard, which transmits all performance data to the cloud in real time. Evaluation can be conveniently carried out using an app or web browser. Scope of delivery: Deye SUN-30K-SG02HP3-EU-AM3 (30 kW HV Hybrid Inverter) 1 x Deye SUN-30K-SG02HP3-EU-AM3 inverterA powerful three-phase high-voltage hybrid inverter with 30 kW output, integrated LCD colour touchscreen and three MPPT trackers for large PV systems.1 x Wall Mount BracketA reinforced metal installation rail for secure mounting of the heavy industrial unit on a load-bearing wall structure.1 x Wi-Fi Stick (data logger)A pluggable communication module for Internet connection for remote monitoring via Deye Cloud or Solarman App.3 x Current Transformer (CT)External clamp current transformers for accurate measurement of energy flows at the house connection, required for zero export and local consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the different PV strings to the inverter.1 x set battery connection plugs (High-Voltage)Special high-voltage connectors for safe electrical connection of a compatible HV battery storage system.1 x Communication cable (BMS)A pre-assembled RJ45 data cable for communication between the inverter and the battery management system.1 x Mounting kit (screws and dowels)A set of stainless steel screws and heavy duty dowels for proper installation of the wall bracket.1 x User manualA printed manual with detailed installation instructions, wiring diagrams and safety instructions.

The Deye SUN-10K-SG01HP3-EU-AM2 is a state-of-the-art, three-phase high-voltage hybrid inverter specifically developed to maximise self-consumption and increase energy independence in residential and commercial properties. With a rated power of 10 kW, this device combines the functions of a photovoltaic inverter, a battery charger, and an off-grid system in one robust unit.The AM2 series is distinguished by its compatibility with high-voltage battery systems, which significantly increases system efficiency by reducing conversion losses. Thanks to its extremely fast switching time, it also functions as a fully-fledged uninterruptible power supply (UPS), which continues to supply critical loads within milliseconds in the event of a power failure.Highlights at a glanceMaximum efficiency: Support for high-voltage batteries minimises transmission losses and optimises overall system performance.Genuine 3-phase backup power: Provides a full three-phase backup power supply with 100% unbalanced load capability in the event of a mains failure.DC and AC coupling: Flexibly deployable for upgrading existing solar systems (AC side) or for complete new installations (DC side).Intelligent load management: A dedicated "Smart Load" connection allows targeted control of large consumers such as heat pumps or heating rods when there is a PV surplus.Robust IP65 housing: Suitable for indoor and outdoor installation, protected against dust and water jets.Advanced communication: Integrated interfaces for WLAN/LAN monitoring as well as RS485/CAN for precise communication with BMS systems from renowned battery manufacturers.Colour touch LCD: Intuitive operation and direct visualisation of the energy flows directly on the device.Areas of applicationHome optimisationPerfect for households with electric car and heat pump to drastically increase the proportion of solar power in total consumption.Commercial PV systemsUse in smaller commercial enterprises to reduce electricity costs and to safeguard critical IT infrastructure.Agriculture & off-grid solutionsReliable energy supply in regions with unstable power grids or for completely self-sufficient operation.Assembly & safety instructionsBattery compatibilityCheck Deye's compatibility list before installation. The inverter is optimised for high-voltage storage systems; 48V systems cannot be operated with this specific model.Ventilation & coolingWhen wall-mounting, ensure sufficient distance to the sides (min. 30 cm) and top/bottom (min. 50 cm) to ensure optimal heat dissipation.Surge protectionThe device has integrated Type II surge protection for DC and AC, which reduces installation costs and increases safety. Properties ModelDeye SUN-10K-SG01HP3-EU-AM2 Rated output power10 kW (10,000 Watts) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-ion battery Battery voltage range160 V – 700 V Number of MPP trackers2 MPPT Max. efficiency97.60 % Protection classIP65 (installation outdoors possible) Special featureColour touch display & black start capable  FAQs about the Deye SUN-10K-SG01HP3-EU-AM2Can the inverter be connected in parallel?Yes, up to 10 devices. For higher power requirements, multiple units can be paralleled to scale both AC power and battery capacity.Does the device support zero export?Yes, fully configurable. The inverter can be configured using the supplied smart meter or CT clamps so that no electricity is fed into the public grid (zero export function).Is the WLAN module included in the scope of delivery?Yes, a logger is usually included. The inverter comes as standard with a WLAN stick (LSW-3) for easy connection to the Solarman app. Scope of delivery: Deye SUN-10K-SG01HP3-EU-AM2 – 10 kW / 3-phase hybrid inverter 1 x Deye SUN-10K-SG01HP3-EU-AM2 inverterA three-phase high-voltage hybrid inverter with 10 kW output, integrated LCD touchscreen and two MPPT trackers.1 x wall mount bracketA robust metal mounting rail for secure attachment of the unit to the wall.1 x Wi-Fi plug / data loggerA pluggable communication module for Internet connection for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External sensors for precise measurement of the energy flow at the house connection, required for zero export and self-consumption regulation.1 x set of PV connectors (MC4-compatible)The corresponding pairs of DC plugs (plus and minus) for connecting the solar modules to the inverter.1 x set of battery connection plugsSpecial high-voltage connectors for safe electrical connection of a compatible battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for communication between the inverter and the battery management system.1 x mounting set (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x user manualA printed manual with detailed circuit diagrams, installation instructions and safety information.