Batteries

This NiMH battery is a specific replacement for the 6-volt systems from HBC Radiomatic, which are often used in more compact handheld transmitters (such as quadrix, keynote or vector) are used. Although it outwardly looks very similar to the widely used 3.6V batteries (FuB 05A), this pack provides 6.0 Volt.It replaces the original HBC batteries with the designations BA206000, BA206030, BA226030 as well as the types FuB 05XL, FuB 05N and the part number PM237745002. With 1,500 mAh (1.5 Ah) it offers reliable performance for everyday work use.Highlights at a glanceAttention: 6 Volt version! This battery is specially for HBC devices that 6V operating voltage require. It is the more powerful counterpart to the visually almost identical 3.6V batteries (FuB 05AA).NiMH technology: Thanks to nickel-metal hydride cells there is no memory effect. You can charge the battery at any time. It also replaces old NiCd batteries (BA225000/BA226030) if the device can handle 6V.Compact design: Despite the higher voltage (5 cells inside instead of 3) the battery retains its compact format to fit into the corresponding radio transmitters.Compatible designations: The battery is often listed in the market under various numbers, including FuB 05XL (XL often stands for the higher voltage/performance in the small casing), FuB 05N or PM237745002.Important note on voltage (3.6V vs. 6V)Your enquiry also includes numbers for 3.6V batteries (BA205000, BA205030, FuB 05AA). Please be sure to check your device:FuB 05AA / BA205xxx: These are 3.6 Volt batteries.FuB 05XL / BA206xxx: These are 6.0 Volt batteries (this article). Use this 6V battery only if your old battery also had 6V or the type plate on the transmitter indicates 6V. Using 6V in a 3.6V device can damage the electronics! Features ModelReplacement battery for HBC Radiomatic 6V (BA206030) Replaces original no.**BA206030**, BA206000 (old NiCd), BA222060, FuB 3A (often identical in design) Chemistry**NiMH** (Nickel-metal hydride) - No memory effect Voltage**6.0 V** (5 cells) Capacity**1500 mAh (1.5 Ah)** - Solid standard capacity (upgrade to 700mAh NiCd) Compatible transmitters (selection)spectrum 1, spectrum 2, spectrum 3, patrol D, technos, eco (6V versions) FormBlock battery (orange or black), 2 contacts on top Dimensions (L x W x H in mm)approx. 152 x 56 x 19 (standard HBC block size) Charging informationCharge only in HBC chargers (e.g. QE108600, QA108600) Weight (g)approx. 210 - 220  FAQs on the HBC 6V FuB 05XLMy old battery has the number BA205030 (3.6V). Can I use this 6V battery?No, absolutely not. Even if both batteries look mechanically similar, the double voltage (6V instead of 3.6V) would probably destroy your transmitter. If you had BA205..., you absolutely need the 3.6V version.For which transmitters is this 6V battery intended?It is often found in newer or more powerful versions of the series quadrix, keynote, vector or special micron versions. What is always decisive is the type plate on the transmitter.What does 1.5 Ah mean?This stands for 1,500 milliampere hours. This is a solid standard capacity for 6V packs of this size. There are variants with up to 700 mAh (old, NiCd) or up to 2100 mAh (high-end NiMH). With 1.5 Ah you are in the good mid-range and have enough energy for a normal working day.

.The HBCBA210040.1500 crane battery is a NiMH pack with 2×6 V and 1.5 Ah for HBC control units BA210040, BA211060, BA213020, BA214060 and BA214061 and ensures a reliable power supply for long periods of use. .

The Varta NiMH Professional rechargeable batteries 5716 in blister packs of 4 offer outstanding performance and reliability for devices with high energy requirements. These rechargeable batteries are perfect for demanding applications such as digital cameras, torches and professional tools. With their high capacity and long service life, the NiMH Professional rechargeable batteries guarantee a constant power supply and are an environmentally friendly alternative to disposable batteries. The low self-discharge ensures that the rechargeable batteries are reliably ready for use even after long periods of storage. The blister pack of 4 is the ideal solution for a continuous power supply, as you always have a sufficient supply of powerful rechargeable batteries to hand.

The Exide Marathon XL12V70 is a long-lasting, maintenance-free VRLA lead-acid battery with modern AGM technology. With a nominal capacity of 66.6 Ah (C10, 1.80 V/Z, 20 °C), it is the reliable choice for telecommunication systems, UPS systems, safety lighting, railway technology and power supply networks. Thanks to a design life of over 12 years, it offers maximum safety, efficiency and sustainability.Highlights at a glanceNominal capacity: 66.6 Ah (C10, 1.80 V/Z, 20 °C)Long service life: ≥ 12 years according to EUROBAT "Long Life"Maintenance-free: AGM technology, no need to top up with waterCompact: 262 × 172 × 223 / 239 mm at approx. 24.6 kgExtremely low gassing: internal gas recombination of 99 %Safety: optional flame-retardant housing (UL 94-V0)Powerful for critical applicationsThe XL12V70 is particularly suitable for medium and longer bridging times. Whether in telecommunications, UPS systems, railway technology, hazard detection technology or photovoltaic storage systems, the battery impresses with its high energy density, stability and operational reliability even under demanding conditions.Focus on efficiency and operational safetyWith its short recharge time and extremely low self-discharge, the XL12V70 guarantees high availability. The internal gas recombination of 99 % ensures virtually gassing-free operation, making the battery maintenance-free. It is also not subject to any transport restrictions in accordance with IATA A67 and can be used safely anywhere in the world.Advanced AGM technology for a long service lifeThe built-in lead-calcium alloy grid plates offer high corrosion resistance and guarantee stable performance over many years. Produced in Europe and certified to ISO 9001, the Marathon XL12V70 fulfils the highest standards of quality, reliability and safety.Features  ModelExide Marathon XL12V70 Battery typeVRLA AGM (Telecom / UPS) Rated voltage (V)12 Capacity (Ah)66.6 (at 10h rate) Short-circuit current (A)2600 Charging voltage (trickle charge)13.68V (at 20°C) Charging voltage (heavy charge)14.1V - 14.4V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)262 x 172 x 224 Weight (kg)approx. 24.5 ConnectionM6 screw connection CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon XL12V70For which applications is the XL12V70 suitable?The XL12V70 is ideal for telecommunication systems, UPS systems, railway technology, safety lighting, hazard detection technology and photovoltaic storage solutions.How long is the service life of the battery?The design service life is at least 12 years according to EUROBAT classification "Long Life".Is the Marathon XL12V70 maintenance-free?Yes, the battery is completely maintenance-free thanks to AGM technology and does not require topping up with water.Are there any transport restrictions for the XL12V70?No, ready-to-use blocks such as the XL12V70 are exempt from transport restrictions according to IATA A67 and can be transported worldwide.What are the advantages of AGM technology?AGM technology enables high energy density, fast charging times, very low self-discharge and maximum operational safety thanks to an internal gas recombination of 99 %.

The Exide Marathon XL12V85 is a robust, maintenance-free VRLA lead-acid battery with modern AGM technology. With a nominal capacity of 85.7 Ah (C10, 1.80 V/Z, 20 °C), it is ideal for telecommunication systems, UPS systems, railway technology, power distribution networks and safety-related applications. Thanks to a design life of over 12 years, it offers maximum reliability and efficiency.Highlights at a glanceNominal capacity: 85.7 Ah (C10, 1.80 V/Z, 20 °C)Long service life: ≥ 12 years according to EUROBAT "Long Life"Maintenance-free: AGM technology, no need to add waterHigh operational safety: internal gas recombination up to 99%Compact dimensions: 309 × 172 × 223 / 239 mm at 29.3 kgMaximum reliability for critical applicationsThe Marathon XL12V85 was designed for medium to longer bridging times and impresses with its high energy density and stable power output. Typical fields of application are UPS systems, telecommunications, railway technology, safety lighting, hazard detection technology and photovoltaic storage solutions.Focus on efficiency and operational safetyWith short recharge times, low self-discharge and high power reserves, the XL12V85 offers maximum availability. The AGM technology makes it completely maintenance-free, and thanks to the internal gas recombination it operates almost gas-free. Transport is possible worldwide without restrictions in accordance with IATA A67.Advanced AGM technology for long service lifeThe XL12V85 is characterised by its lead-calcium alloy grid plates, which guarantee high corrosion resistance. Its production in Europe in accordance with ISO 9001 ensures compliance with the highest quality and safety standards, ensuring maximum reliability in critical applications.Features  ModelExide Marathon XL12V85 Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)12 Capacity (Ah)85.7 (at 10h rate) Short-circuit current (A)3100 Charging voltage (trickle charge)13.68V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)353 x 175 x 225 Weight (kg)approx. 31.0 ConnectionM8 screw connection CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon XL12V85For which applications is the XL12V85 suitable?The XL12V85 is ideal for UPS systems, telecommunications, railway technology, safety lighting, hazard detection technology and photovoltaic storage systems.How long is the service life of the battery?The design service life is at least 12 years according to EUROBAT classification "Long Life".Is the Marathon XL12V85 maintenance-free?Yes, the battery is completely maintenance-free thanks to AGM technology and does not require adding water.Are there any transport restrictions for the XL12V85?No, ready-for-use blocks such as the XL12V85 are exempt from transport restrictions in accordance with IATA A67 and can be transported safely worldwide.What are the advantages of AGM technology?AGM technology enables short charging times, very low self-discharge, high energy density and maximum safety through internal gas recombination. 

The VISION RBC44 is a high-quality, ready-to-install replacement battery cassette designed as a direct and reliable replacement for the original APC RBC44 cartridge. Fitted with four high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore full performance of your APC Smart UPS XL system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power for your business-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement cassette for APC RBC44, ensures easy and quick hot swap installation.Plug and Play Installation: The cartridge is supplied fully assembled and wired for replacement in just a few minutes with no interruption in operation.High Reliability: Uses only high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the batteries unnecessary throughout their service life.Durable: Designed for prolonged service life in standby operation to reliably protect your systems for years.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC44 cartridge is designed to meet the demanding requirements of APC Smart UPS XL systems. The installed batteries are high-current capable and can instantly provide the required performance in the event of a power failure to safely shut down or continue running your connected servers, network storage and other critical devices. Its stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC44 cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), which safely binds the electrolyte in a glass fibre mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures long storage and readiness. The tough ABS plastic case of the batteries provides excellent protection against mechanical impacts.Features  ModelVISION RBC44 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cassette) ContentsPre-assembled cassette (4 batteries) Rated voltage (V)48 (System Voltage) Capacity (Ah)17 (Typical value, per battery) Charging voltage (trickle charge)54.0V - 55.2V (System) Charging voltage (cycle operation)57.6V - 60.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 24.0 (Total weight) ConnectionMatching APC system plug Compatibility (excerpt)APC SU2200RMXL3U, SU3000RMXL3U  FAQs about the VISION RBC44 replacement battery cartridgeWhich UPS models is this cartridge suitable for?The VISION RBC44 cartridge is designed as a replacement for the original APC RBC44 battery unit and is, among others, compatible with the following APC Smart UPS XL models: SU2200RMXL3U, SU2200RMXLI3U and SU3000RMXL3U. Please check the exact model designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is very simple and can be performed during operation (hot swap) with no technical expertise. The APC UPS systems have an easily accessed battery compartment. You only have to pull out the old cassette, disconnect the plug, connect the new VISION RBC44 cartridge and slide it back in.Do I have to set anything on the UPS after replacement?After inserting the new cartridge, the UPS generally recognises the replacement automatically. It is recommended to note the battery replacement date using the software (PowerChute) or the display and to carry out a self-test function. A runtime calibration can be useful to ensure the correct remaining runtime display.Is it safe to use a third-party replacement cassette?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC44 cassette is expertly assembled, tested and uses only quality-approved batteries designed for use in UPS systems and ensures maximum safety.What is the service life of the VISION RBC44 replacement cassette?The service life of the installed batteries is up to 5 years in typical standby mode in a UPS system at 20 °C. Actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I have to consider when disposing of the old cassette?Lead batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old cassette free of charge and in an environmentally friendly way at municipal collection points, recycling centres or any retailer selling starter batteries. 

The Sonnenschein SB12/60 A is an absolutely maintenance-free premium-class lead-gel block battery, developed for the most demanding cyclic applications in professional solar systems. As part of the globally proven SOLAR BLOCK series, it combines proven Dryfit® gel technology with an extremely robust tubular plate construction. With a nominal voltage of 12V and a capacity of 60 Ah (C100), it offers the highest cycle stability and reliability for self-sufficient energy systems.Highlights at a glanceSuperior tubular plate technology: Offers the highest cycle stability and longevity in demanding solar and traction use.Dryfit® gel technology: Absolutely maintenance-free throughout its entire lifespan, highest reliability and leak-proof.Extremely high cycle life: Developed for thousands of charge and discharge cycles (approx. 1200 cycles at 60% DoD).Deep discharge proof: Excellent recovery even after repeated deep discharges and absolutely robust against acid stratification.Low self-discharge: Perfect for seasonal use and long periods of autonomy.Maximum supply security for off-grid systemsThe Sonnenschein SB12/60 A is the specialist for large and critical cyclic applications. Its main areas of use are medium-sized off-grid solar systems for holiday homes, autonomous telecommunications stations, signalling systems and demanding marine applications. Wherever the battery is the only energy source and is deeply discharged daily, this battery offers maximum service life and reliability.Proven Dryfit® gel and tubular plate technologyThe combination of Dryfit® gel and tubular plates (positively armoured) is the key to the extreme robustness of this battery. The gel binds the electrolyte, prevents acid stratification and makes the battery maintenance-free. The tubular plate construction protects the active mass from decay during deep discharge cycles, ensuring unrivalled longevity compared to standard grid plate batteries.Developed for longevity and reliabilityThe SOLAR BLOCK series was developed for maximum economy over its entire lifespan. The extremely high cycle life significantly reduces the need for expensive and time-consuming battery replacement and lowers the system's total cost of ownership (TCO). The high manufacturing quality ensures consistent performance and maximum operational safety. Features  ModelSonnenschein SOLAR BLOCK SB12/60 A ApplicationSolar / cyclic operation (off-grid) TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)52 (C10) / 60 (C100) Cycle stabilityapprox. 1200 cycles (at 60% DOD) Dimensions (L x W x H in mm)278 x 175 x 190 ConnectionStandard Autopole (SAE) Weight (kg)approx. 18.0  FAQs about the Sonnenschein SB12/60 A lead-gel batteryWhat is the difference between this SOLAR BLOCK (SB) and the SOLAR (S) series?The SOLAR BLOCK (SB) series (this model) uses a tubular plate construction. It is designed for an extremely high cycle count (approx. 1200 cycles) and the toughest daily operation in large off-grid systems. The SOLAR (S) series (e.g. S12/85 A) uses grid plates and is also very cycle resistant (approx. 800 cycles), but the SB series offers even greater longevity in high-performance cyclic operation.What is the main advantage of Dryfit® gel technology in solar operation?In cyclic solar operation, avoiding acid stratification is crucial. In gel batteries, the electrolyte is bound, which prevents stratification and makes the battery more resistant to deep discharges. This results in a significantly longer service life than for AGM or wet batteries in this application.What do the C10 and C100 capacity values mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C100 (discharge over 100 hours) is the standard for solar applications, since slow discharges over several days are usual here. C10 (discharge over 10 hours) is relevant for faster discharge.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally hazardous substances and must not be disposed of as household waste. You can return your old battery free of charge at any dealer who sells new batteries or at municipal recycling centres to ensure professional recycling.

The Sonnenschein SB12/130 A is a durable and maintenance-free gel battery from the SOLAR BLOCK series, distinguished by its high cycle stability. It is specially designed for use in medium-sized solar systems, holiday and weekend homes, smaller wind power plants, as well as security power supplies. With 130 Ah (C100), it delivers reliable energy supply.Highlights at a Glance12 V block battery with 130 Ah (C100, 1.80 V/C, 20 °C)Up to 1200 charge cycles at 60% depth of discharge (C10, 20 °C)Maintenance-free due to sealed VRLA gel technologyVery low self-discharge – up to 2 years storage possible at 20 °CRobust design – deep discharge-proof and durable under harsh conditionsPowerful for Solar and Energy Storage SolutionsThe SB12/130 A is a reliable energy source for photovoltaic systems, holiday homes and backup power supplies. It delivers consistent energy and is ideally suited for cyclic operation in renewable energy systems.Efficiency and SafetyThanks to the dryfit® gel technology, the battery operates completely maintenance-free. Gas recombination ensures it is extremely low-gassing and safe in operation. The low self-discharge provides long shelf life and operational readiness.Robust Design for Long Service LifeThe SB12/130 A impresses with up to 1200 charge cycles at 60% DoD (Depth of Discharge). It is deep discharge-proof and designed for especially long lifetime even in tough environmental conditions. Features  ModelSonnenschein SB12/130 A ApplicationSolar / Cycle operation TechnologyLead gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)130 (C100) Cycle durabilityapprox. 1200 cycles at 60% DOD Dimensions (L x W x H in mm)513 x 189 x 223 ConnectionM8 internal thread Weight (kg)approx. 46.0  FAQs about the Sonnenschein SB12/130 A Gel BatteryFor which application areas is the Solar Block SB12/130 A particularly suitable?It is ideally suited for solar applications – such as in holiday homes, weekend residences, smaller solar systems (off-grid), solar or wind power plants, offshore buoys, yachts, measurement stations as well as for emergency power supply, parking machines, emergency call systems or information pillars. Is the SB12/130 A maintenance-free?Yes, due to the sealed VRLA gel technology (dryfit®), the battery is completely maintenance-free, no need to top up with water.What is the service life of the battery?The battery achieves up to 1200 charge cycles at 60% depth of discharge (C10, 20 °C).Can the battery be deep discharged?Yes, the SB12/130 A is deep discharge-proof and especially reliable in cyclic applications.What capacity and service life does the battery offer?It has a nominal capacity of 130 Ah (C100) and offers a service life of up to 1,200 charge cycles at 60% discharge (C10, 20 °C).How big is the battery, how heavy is it and what type of connection does it have?The battery measures 513 × 223 × 223 mm, weighs about 45.5 kg and is equipped with an A terminal (Automotive clamp) – terminal arrangement “circuit 3”.What advantages does the dryfit® gel technology offer in terms of safety and maintenance?This technology ensures maintenance-free operation, leak-proof gel electrolyte, low gas generation, robust construction, deep discharge protection, very long shelf life (up to 2 years without recharge at 20 °C), low power consumption and complete recyclability. There are no transport restrictions, e.g. according to IATA DGR A67.

The Sonnenschein SB12/185 A is a reliable and powerful gel battery from the SOLAR BLOCK series. It was specially developed for use in medium-sized solar systems, weekend homes, smaller wind turbines and in backup power supplies. With 185 Ah (C100), it impresses with its long service life, high cycle stability and its maintenance-free dryfit® gel technology.Highlights at a glance12 V block battery with 185 Ah (C100, 1.80 V/C, 20 °C)Up to 1200 charge cycles at 60% depth of discharge (C10, 20 °C)Maintenance-free thanks to VRLA gel technology – no topping up requiredVery low self-discharge – storage life up to 2 years at 20 °CRobust design, deep discharge safe and resistant to harsh conditionsPowerful for solar applicationsThe SB12/185 A supplies reliable energy for photovoltaic systems, holiday homes, emergency power supplies and smaller wind turbines. Thanks to its cycling capability, it is ideally suited for regular charge and discharge in renewable energy systems.Efficiency and safetyThe sealed VRLA gel technology ensures absolutely maintenance-free operation. Thanks to its gas recombination, the battery is extremely low-gassing and can therefore be safely used in enclosed spaces.Robust gel technologyWith up to 1200 charging cycles at 60% depth of discharge, the SB12/185 A offers a long service life. The dryfit® gel technology protects against deep discharge and ensures reliable power supply even under demanding conditions. Features  ModelSonnenschein SB12/185 A ApplicationSolar / cycle operation TechnologyLead gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)185 (C100) Cycle stabilityapprox. 1200 cycles at 60% DOD Dimensions (L x W x H in mm)513 x 223 x 223 ConnectionM8 internal thread Weight (kg)approx. 57.0  FAQs about the Sonnenschein SB12/185 A gel batteryFor which applications is the SB12/185 A particularly suitable?It is ideal for off-grid solar systems, holiday and weekend homes, small wind turbines, security power supply, offshore systems, yachts, measuring stations, parking ticket machines and emergency call systems.Is the SB12/185 A maintenance-free?Yes, the battery is completely maintenance-free due to VRLA gel technology, topping up with water is not necessary.What is the service life of the battery?The battery achieves up to 1200 charging cycles at 60% depth of discharge (C10, 20 °C).What does "incl. MTZ" mean and what function does the mounting accessory serve?"Incl. MTZ" indicates that mounting accessories, typically a base rail, are included. This makes it easier to securely fasten the battery in the frame or housing.How large and heavy is the battery and how is it connected?The dimensions are approx. 518 × 274 × 216 mm (at total height incl. terminals up to 238 mm), the weight is around 61 kg, and connection is via an A terminal (car terminal) with pole arrangement 3.

The Sonnenschein A612/100 A is an absolutely maintenance-free lead-gel block battery developed for high operational reliability and long service life in professional standby and light cyclic applications. As part of the globally proven A600 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 100 Ah, it is the ideal energy source for fail-safe emergency power supplies, signalling systems, and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout its life, maximum reliability, and leak-proof.High reliability: Classified as "General Purpose" according to Eurobat for a long service life of 6 to 9 years.High cycle stability: Offers good cycle stability and excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High shelf life and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A612/100 A is a versatile specialist for standby-parallel operation (standby use) and light traction applications. Its main areas of application are uninterruptible power supplies (UPS), telecommunications and IT systems, emergency and safety lighting systems as well as the power supply in hospitals, railway installations, and in marine technology.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also provides excellent cycle stability and very low self-discharge. The internal gas recombination protects against loss of capacity and makes operation particularly safe and efficient, without the need to top up with water.Developed for longevity and reliabilityThe A600 series was developed for maximum cost-effectiveness over the entire service life. The long service life of up to 9 years reduces the necessity of expensive battery replacements in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and thus contribute to the overall system's high operational reliability. Features  ModelSonnenschein A612/100 A ApplicationStandby / UPS / Telecommunication TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)100 (C10) Design life15 years (Eurobat Very Long Life) Dimensions (L x W x H in mm)396 x 176 x 374 ConnectionStandard car terminal (SAE) Weight (kg)approx. 41.5  FAQs about the Sonnenschein A612/100 A lead-gel batteryWhat is the main advantage of Dryfit® gel technology?The key advantage is the combination of absolute maintenance freedom, high cycle stability, and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very consistent performance over a long period.What does the "Eurobat General Purpose" classification mean?Eurobat is the association of European battery manufacturers. The "General Purpose" classification means that this battery is designed for an expected lifespan of 6 to 9 years under defined standby conditions (mostly 20°C ambient temperature and correct float charge).What is the difference between a standby battery and a starter or solar battery?A standby battery like this is optimised for standby-parallel operation. It is permanently maintained at a constant voltage (float charge) and only rarely needs to deliver energy. A starter battery is designed for short-term, high currents. A solar battery (pure cycle battery) is optimised for daily, deep discharging and recharging.How should this lead battery be disposed of?Lead batteries contain environmentally hazardous substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer that sells new batteries or at municipal recycling centres to ensure proper disposal.

The Exide Marathon M12V50FT is a durable, maintenance-free VRLA lead-acid battery with modern AGM technology. Thanks to front terminal connections, it is particularly suitable for use in cabinets and racks, as installation and maintenance are considerably simplified. With a nominal capacity of 47 Ah (C10, 1.80 V/C, 20 °C) and a design life of over 12 years (EUROBAT "Very Long Life"), it is ideal for telecommunications and power supply applications with medium to long bridging times.Highlights at a glanceNominal capacity: 47 Ah (C10, 1.80 V/C, 20 °C)Front terminal connections (M-M6-90°) for easy installation and maintenanceVery long service life: > 12 years (EUROBAT "Very Long Life")Maintenance-free thanks to AGM technology, no need to top up waterMade in Europe (ISO 9001 certified)Powerful for critical applicationsThe M12V50FT provides reliable power for UPS systems, telecommunications systems, railway technology, safety lighting and power distribution networks. With high energy density and robust design, it is also suitable for use in demanding environments.Focus on efficiency and operational safetyAGM technology ensures short charging times, low self-discharge and high operational reliability. Central degassing and internal gas recombination of 99% enable virtually gas-free, maintenance-free operation throughout its entire service life.Advanced AGM technology for a long service lifeThe use of lead-calcium alloy grid plates ensures high corrosion resistance and reliability. The M12V50FT is UL-certified, complies with IEC 60896-21/-22 and fulfils the highest quality and safety requirements.Features  ModelExide Marathon M12V50FT Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)12 Capacity (Ah)47 (at 10h rate) Short-circuit current (A)1850 Charging voltage (maintenance)13.68V (at 20°C) Charging voltage (boost)14.1V - 14.4V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)209 x 108 x 239 Weight (kg)approx. 16.5 ConnectionM6 front terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon M12V50FTFor which applications is the M12V50FT suitable?The battery is ideally suited for telecommunications, UPS systems, power distribution networks, safety lighting, and railway technology.What does the front terminal design mean?The terminals are fitted at the front, which considerably simplifies installation and maintenance in cabinets and racks.Is the M12V50FT maintenance-free?Yes, thanks to AGM technology with glass fibre separators, no refilling of water is required.How long is the service life of the battery?The design life is over 12 years in accordance with EUROBAT classification "Very Long Life".Is the battery subject to transport restrictions?No, operational blocks such as the M12V50FT can be transported worldwide without restrictions according to IATA A67.

The Exide Marathon M12V60FT is a maintenance-free VRLA lead-acid battery with AGM technology, which is ideal for telecommunications, UPS systems and power supply applications. Its front-terminal design allows for easy installation and maintenance in module cabinets and battery racks. With a nominal capacity of 59 Ah (C10, 1.80 V/cell, 20 °C) and a EUROBAT-certified design life of over 12 years (“Very Long Life”), it offers outstanding reliability and longevity.Highlights at a glanceNominal capacity: 59 Ah (C10, 1.80 V/cell, 20 °C)Front-terminal connections (M-M6-90°) for easy installation and maintenanceVery long service life: > 12 years (EUROBAT “Very Long Life”)Maintenance-free thanks to AGM technology, no need to top up with waterExtremely low gassing thanks to 99% internal gas recombinationPowerful in critical applicationsThe M12V60FT is designed for reliable operation in telecommunication systems, UPS systems, emergency lighting and power distribution networks. Thanks to its high energy density, it provides a stable and safe power supply, even with medium and long bridging times.Efficiency and operational safety at the highest levelThe AGM technology with highly compressed glass mat separators ensures high charging and discharging efficiency as well as low self-discharge. Central degassing and the robust housing ensure safe and maintenance-free operation throughout the entire service life.Robust AGM technology for maximum reliabilityThe use of lead-calcium grid plates guarantees excellent corrosion resistance and a long service life. With UL certification and compliance with IEC 60896-21/-22 standards, the M12V60FT offers the highest quality and safety standards.Features  ModelExide Marathon M12V60FT Battery typeVRLA AGM (Telecom / UPS) Nominal voltage (V)12 Capacity (Ah)59 (at 10h rate) Short-circuit current (A)2300 Charging voltage (float charge)13.68V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)241 x 108 x 277 Weight (kg)approx. 20.0 ConnectionM8 front terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon M12V60FT lead-acid batteryFor which applications is the M12V60FT suitable?The battery is ideal for telecommunications, UPS systems, power supply systems, emergency lighting and railway technology.What does the front-terminal design mean?The terminals are located on the front, which makes installation and maintenance in battery racks or cabinets considerably easier.Is the M12V60FT maintenance-free?Yes, thanks to AGM technology with glass mat separators, there is no need to refill with water.How long is the service life of the battery?The design life is over 12 years according to EUROBAT classification “Very Long Life”.Is the battery subject to transport restrictions?No, ready-to-use blocks such as the M12V60FT can be transported worldwide without restrictions (according to IATA A67).

The Exide Marathon M12V90FT is a reliable VRLA lead-acid battery with AGM technology, designed for use in telecommunications, UPS systems and power supply applications. Thanks to its front-terminal design, it is ideal for installation in module cabinets and battery racks. It impresses with high performance, a service life of over 12 years and maintenance-free operation without topping up water.Highlights at a glancePowerful: 86 Ah capacity (C10, 1.80 V/Z, 20 °C)Front terminal connections: Simplified installation and maintenance in racks and cabinetsLong service life: > 12 years (EUROBAT classification "Very Long Life")Maintenance-free: AGM technology with gas recombination, no topping up requiredHigh operational safety: Central degassing and internal gas recombination rate of 99 %Reliable energy for critical applicationsThe Marathon M12V90FT is particularly suitable for use in telecommunication systems, UPS systems, power distribution networks and security applications. Thanks to its high energy density, it delivers reliable performance even during longer bridging times and demanding load profiles.Efficiency thanks to modern AGM technologyThe glass mat separators (Absorbent Glass Mat) enable fast charging capability, high cycling stability and stable power delivery. With a gas recombination of 99 %, the battery operates with extremely low maintenance. Central degassing and flame-retardant case option provide additional safety.Robust design for maximum longevityThe grid plates made from advanced lead-calcium alloy guarantee corrosion resistance and extended service life. A low self-discharge rate allows long storage times, while the operating temperature range of -40 °C to +55 °C permits flexible use in a wide range of environments.Features  ModelExide Marathon M12V90FT Battery typeVRLA AGM (Telecom / UPS) Rated voltage (V)12 Capacity (Ah)86 (at 10h rate) Short-circuit current (A)3150 Charging voltage (trickle charge)13.68V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)395 x 108 x 287 Weight (kg)approx. 31.5 ConnectionM8 front terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon M12V90FTFor which applications is the M12V90FT suitable?The battery is ideal for telecommunication systems, UPS systems, power supplies, emergency power systems and safety-critical applications.What does the front-terminal design mean?The connection terminals are located on the front side, which makes installation and maintenance in racks and battery cabinets much easier.Is the Exide Marathon M12V90FT maintenance-free?Yes, AGM technology enables internal gas recombination, so topping up with water is not necessary.What service life does the battery offer?The design service life is over 12 years and corresponds to the EUROBAT classification "Very Long Life".Is the battery subject to transport restrictions?No, the M12V90FT is not subject to transport restrictions according to IATA A67 and can be shipped without issue by road, rail, water or air.

The Exide Marathon M12V105FT is a maintenance-free VRLA lead-acid battery with AGM technology for demanding telecommunications, UPS and power supply applications. The front-terminal design makes installation in racks and battery cabinets and maintenance during operation easier. With a design life of over 12 years, very high operational safety and low self-discharge, it is designed for reliable availability for medium and longer bridging times.Highlights at a glance100 Ah capacity (C10, 1.80 V/Z, 20 °C) and 2795 W per block at 10 minutesFront terminal connections for quick installation and easy maintenance in cabinets and racksDesign life over 12 years according to EUROBAT Very Long LifeAGM technology with 99 percent gas recombination, no need to replenish waterCentral degassing and optional flame-retardant housing to UL 94-V0Performance for UPS and telecommunicationsThe M12V105FT provides stable power for critical infrastructure such as UPS installations, telecommunication nodes, power distribution networks and security or emergency power systems. The high power density ensures reliable supply even during peak loads and extended bridging times. Short-circuit current and low internal resistance support rapid provision of the required currents.Efficiency with low maintenanceThe absorbent glass mat separators enable short charging times and efficient energy feedback. Thanks to the internal gas recombination of 99 percent, the battery is particularly low-maintenance. Central degassing and the option of a flame-retardant housing increase operational safety in enclosed rack environments.AGM front terminal technology for long service lifeThe lead-calcium grid plates ensure high corrosion resistance and thus a long service life. The extended temperature range from minus 40 to plus 55 degrees Celsius supports flexible use. The front terminals facilitate field service, reduce downtimes and minimize installation effort in modular cabinets.Features  ModelExide Marathon M12V105FT Battery typeVRLA AGM (Telecom / UPS) Rated voltage (V)12 Capacity (Ah)100 (at 10h rate) Short-circuit current (A)3300 Charging voltage (trickle charge)13.68V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)395 x 108 x 287 Weight (kg)approx. 34.5 ConnectionM8 front terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon M12V105FT lead-acid batteryFor which applications is the Exide Marathon M12V105FT suitable?The battery is designed for telecommunications systems, UPS systems, power distribution networks, security and emergency power applications and delivers stable performance even with longer bridging times.What is the practical benefit of the front-terminal design?Front terminals facilitate cable management in the rack, reduce installation time and enable fast maintenance without having to remove complete battery strings.Is the Exide Marathon M12V105FT truly maintenance-free?Yes. Thanks to AGM technology with internal gas recombination, there is no need to replenish water, and central degassing supports safe operation.How long is the service life of the battery designed to be?The design service life is over 12 years and corresponds to the EUROBAT classification Very Long Life, provided the recommended operating conditions are observed.Are there any transport restrictions for this type of battery?No. Ready-to-use blocks are not subject to transport restrictions according to IATA A67 and can be transported by road, rail, water or air. 

The Exide Marathon M12V125FT is a long-lasting and maintenance-free VRLA lead-acid battery with AGM technology, specially developed for critical applications in telecommunications, power supply and UPS systems. Its front-terminal design makes it particularly easy to install and maintain in module cabinets and battery racks. With a design life of over 12 years and a robust housing, it impresses with maximum reliability and safety.Highlights at a glance121 Ah capacity (C10, 1.80 V/Z, 20 °C) and 2374 W per block at 10 minutesFront terminal connections for quick installation and easy maintenanceDesign life over 12 years (EUROBAT "Very Long Life")Maintenance-free thanks to AGM technology with gas recombination, no topping up with water requiredCentral degassing and extremely low gassing (99% internal gas recombination)Maximum power for UPS and telecommunication systemsThe Marathon M12V125FT ensures a continuous power supply for telecommunication, power distribution, security, emergency power and UPS systems. Thanks to its high power density, it delivers reliable power, even with longer bridging times and demanding load profiles.Efficiency with proven AGM technologyThanks to the absorbent glass mat separators, the battery stands out for its short charging times, high energy density and stable power output. The 99% gas recombination minimises the maintenance effort to a minimum. Central degassing and flame-retardant housing option provide a high level of safety.Robust design for a long service lifeThe lead-calcium alloy grid plates ensure excellent corrosion resistance and therefore a very long service life. With its extended operating temperature range from -40 °C to +55 °C, the battery can be used flexibly in a variety of different environments.Features  ModelExide Marathon M12V125FT Battery typeVRLA AGM (Telecom / UPS) Rated voltage (V)12 Capacity (Ah)121 (at 10h rate) Short-circuit current (A)3450 Charging voltage (trickle charge)13.68V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)395 x 108 x 287 Weight (kg)approx. 39.5 ConnectionM8 front terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon M12V125FT lead-acid batteryFor which applications is the Exide Marathon M12V125FT suitable?The battery is suitable for telecommunication systems, UPS systems, power distribution networks as well as security and emergency power systems.What does the front terminal design mean?The connections are located at the front, which facilitates installation in cabinets and enables easy maintenance.Is the M12V125FT battery maintenance-free?Yes, thanks to AGM technology with gas recombination, there is no need to top up with water.What service life does the M12V125FT battery offer?The design life is over 12 years and meets the EUROBAT classification "Very Long Life".Is the M12V125FT battery subject to transport restrictions?No. The Exide Marathon M12V125FT is free from transport restrictions according to IATA A67 and can be transported by road, rail, water, or air.

The Exide Marathon M12V155FT is a maintenance-free VRLA lead-acid battery with AGM technology. It has been developed for demanding applications in telecommunications, UPS and power supply. The front-terminal design facilitates installation in module cabinets and battery racks, as well as maintenance during operation. The model is supplied including MTZ.Highlights at a glance155 Ah capacity at C10 (1.80 V/cell, 20 °C) and 3500 W per block for 10 minutesFront terminal connections for quick installation and easy maintenance in racks and cabinetsDesign life over 12 years according to EUROBAT Very Long LifeAGM technology with 99 percent gas recombination, no topping up with water requiredLow self-discharge for extended storage timesMade in Europe in ISO 9001 certified production sitesPerformance for UPS, telecommunications and emergency powerThe M12V155FT delivers stable performance for critical infrastructure such as UPS systems, telecom nodes, power distribution networks as well as security and emergency power systems. The high power density and low internal resistance ensure reliable supply even under peak loads and extended bridging times.Efficient in operation with minimal maintenanceAbsorbent glass mat separators enable short charging times, high energy density and uniform power output. The internal gas recombination of 99 percent means the battery is very low-maintenance. Central degassing increases operational safety in closed rack environments.AGM front terminal technology for maximum longevityThe lead-calcium grid plates provide high corrosion resistance and a very long service life. The large temperature range from minus 40 to plus 55 degrees Celsius allows flexible deployment locations. Front terminals simplify service work, reduce downtime and minimise installation effort in module cabinets.Features  ModelExide Marathon M12V155FT Battery typeVRLA AGM (Telecom / UPS) Rated voltage (V)12 Capacity (Ah)155 (at 10h rate) Short-circuit current (A)5200 Charging voltage (float charge)13.68V (at 20°C) Charging voltage (boost charge)14.1V - 14.4V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12+ years (EUROBAT: Very Long Life) Dimensions (L/W/H, mm)550 x 125 x 316 Weight (kg)approx. 53.0 ConnectionM8 front terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Marathon M12V155FT lead-acid batteryFor which applications is the Exide Marathon M12V155FT suitable?The battery is designed for telecommunication systems, UPS systems, power distribution networks as well as security and emergency power applications, and delivers stable performance even with longer bridging times.What is the advantage of the front-terminal design?Front terminals facilitate cable management in the rack, reduce installation time and enable quick maintenance without dismantling entire battery strings.Is the Exide Marathon M12V155FT maintenance-free?Yes. Thanks to the AGM technology with internal gas recombination, no topping up with water is necessary, and the central degassing system provides additional operational convenience.How long is the service life of the M12V155FT?The design life is over 12 years and corresponds to the EUROBAT classification Very Long Life, provided the recommended operating conditions are met.Are there any transport restrictions for this type of battery?No. Ready-to-use blocks are not subject to transport restrictions according to IATA A67 and can be transported by road, rail, water or air.

The OPTIMA RedTop RT S 2.1 is a revolutionary 6-volt high-performance starter battery that, thanks to patented SPIRALCELL TECHNOLOGY®, delivers maximum starting power in a compact and extremely rugged case. With a nominal voltage of 6 V and an enormous cold cranking current of 800 A for this class, it is the ultimate solution for classic vehicles and demanding applications that require a reliable and powerful 6-volt energy source. Its extreme vibration resistance and absolutely maintenance-free, leakproof design make it the first choice for classic cars, hot rods and tractors.Highlights at a glanceMaximum 6V starting power: Offers the highest possible starting performance for reliable engine starts, even in large-displacement 6-volt engines.SPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and a longer service life.Extreme vibration resistance: Up to 15 times more vibration-resistant than conventional batteries, ideal for use in older vehicles without modern suspension.Absolutely maintenance-free and leakproof: The sealed AGM construction allows installation in almost any position and prevents paint damage caused by acid leakage.Long service life: Lasts up to three times longer than a conventional 6-volt starter battery.Maximum performance for classic vehiclesThe OPTIMA RedTop RT S 2.1 was specifically developed to bring the performance and reliability of modern technology to classic 6-volt vehicles. It is the ideal choice for classic cars, classic vehicles, hot rods and historic agricultural vehicles, which often have engines that are difficult to start. Even after longer periods of inactivity, as is typical for collector's vehicles, it reliably supplies the necessary power for an effortless start.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, wrapped in glass fiber fleece (AGM). This compact and extremely stable design minimizes plate spacing, maximizes active surface area and reduces internal resistance. The result is unrivaled starting performance that can be consistently delivered even under the harshest conditions.Built for the most demanding conditionsThe OPTIMA RedTop is designed for tough use. Its sealed construction not only prevents acid leakage, which is especially important in valuable classics, but also evaporation, making it absolutely maintenance-free. The rugged construction made of impact-resistant polypropylene and the extreme vibration resistance ensure that vibrations and shocks cannot harm the battery. Features  ModelOPTIMA RedTop RT S 2.1 TechnologyAGM Spiralcell Nominal voltage (V)6 Capacity (Ah)50 Cold cranking current EN (A)815 Dimensions (L x W x H in mm)254 x 90 x 206 ConnectionSAE-Autopol Weight (kg)approx. 8.5  FAQs about the OPTIMA RedTop 6V batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY® in a classic car?In classic vehicles, spiral cell technology offers two decisive advantages: first, extreme vibration resistance, which is of great benefit in older chassis. Secondly, it is absolutely leakproof, which protects valuable paint and body parts from acid damage, a common problem with old wet batteries.What is the difference between OPTIMA RedTop, YellowTop and BlueTop?RedTop: A pure high-performance starter battery for maximum starting power. Ideal for vehicles where starting is the main load. YellowTop: A 12-volt dual-purpose battery (starting and supplying) for vehicles with high energy requirements due to additional consumers. BlueTop: A 12-volt special battery for marine and leisure vehicles.Do I need a special charger for this 6V AGM battery?Yes, it is very important to use a modern, microprocessor-controlled charger that is suitable for both 6 volts and AGM technology. Old, unregulated 6-volt chargers can damage the battery due to overvoltage.Can this battery be deeply discharged?The RedTop is designed as a pure starter battery and should not be deeply discharged, as this can shorten its service life. For applications where power is regularly required for consumers at a standstill (e.g. a music system), a YellowTop or BlueTop battery (which are only available in 12V) would be the right choice.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or municipal recycling centers to ensure proper recycling.

The OPTIMA RedTop RT S 3.7 is a revolutionary high-performance starter battery that delivers maximum starting power in a compact and extremely robust housing thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V and an enormous cold start current of 730 A, it is the ultimate solution for demanding vehicles that require a reliable and powerful start under all conditions. Its extreme vibration resistance and the absolutely maintenance-free, leak-proof design make it the first choice for hot rods, off-road vehicles, agricultural machinery and all vehicles that need more than just an ordinary battery.Highlights at a glanceMaximum starting power: Offers the highest possible starting performance for reliable engine start even at extreme temperatures.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and longer service life.Extreme vibration resistance: Up to 15 times more vibration-resistant than conventional batteries, ideal for tough off-road use or heavy vibration.Absolutely maintenance-free and leak-proof: The sealed AGM design enables installation in virtually any position.Long service life: Lasts up to three times longer than a conventional starter battery.Maximum performance for demanding vehiclesThe OPTIMA RedTop RT S 3.7 was specially developed for the extreme demands of high-performance vehicles whose main requirement is a powerful starting impulse. It is the ideal choice for trucks, SUVs, hot rods, classic cars and construction vehicles. It reliably supplies the necessary energy to start large engines effortlessly, even during seasonal use or after long periods of inactivity. Its compact design and high power density also make it the perfect solution for vehicles with limited installation space.Superior SPIRALCELL TECHNOLOGY®The heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, highly pure lead spirals are used here, which are wrapped with a glass fibre mat (AGM). This compact and extremely stable design minimises plate spacing, maximises active surface area and reduces internal resistance. The result is unmatched starting performance that can be delivered consistently even under the harshest conditions.Built for the most demanding conditionsThe OPTIMA RedTop is designed for tough use. Its sealed construction not only prevents acid leakage, but also evaporation, making it absolutely maintenance-free. The robust construction made of shock-resistant polypropylene and the extreme vibration resistance ensure that vibrations and jolts during demanding driving operation cannot harm the battery. Features  ModelOPTIMA RedTop RT S 3.7 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)44 Cold start current EN (A)730 Dimensions (L x W x H in mm)245 x 172 x 194 ConnectionSAE auto post & side connections Weight (kg)approx. 14.7  FAQs about the OPTIMA RedTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, a very low internal resistance for highest starting currents and a longer service life compared to conventional batteries with flat plates. It is optimised for maximum starting performance.What is the difference between OPTIMA RedTop, YellowTop and BlueTop?RedTop: A pure high-performance starter battery for maximum starting power. Ideal for vehicles where the starting process is the main load. YellowTop: A dual-purpose battery (starting and supply) for vehicles with high energy demand due to additional consumers (e.g. winch, large hi-fi systems). BlueTop: Specialist for marine and leisure vehicles, available as a pure starter battery or as a dual-purpose battery.Is this battery suitable for vehicles with many electrical consumers?The RedTop is primarily a starter battery. If your vehicle, in addition to starting, also has extensive equipment such as powerful hi-fi systems, auxiliary headlights or a winch operated when stationary, an OPTIMA YellowTop or BlueTop (dual purpose) is the better choice, as these are designed for deep discharge cycles.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended, which has a special charging characteristic for AGM batteries. This ensures full and gentle charging and maximises service life.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any dealer who sells new batteries or to municipal recycling centres to ensure proper disposal.

The OPTIMA RedTop RT C 4.2 is a revolutionary high-performance starter battery that delivers maximum starting power in a compact and extremely robust housing thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V and an enormous cold start current of 815 A, it is the ultimate solution for demanding vehicles that require a reliable and powerful start in all conditions. Its extreme vibration resistance and absolutely maintenance-free, leak-proof design make it the first choice for hot rods, off-road vehicles, agricultural machinery and all vehicles that need more than just an ordinary battery.Highlights at a glanceMaximum starting power: Offers the highest possible starting power for reliable engine starting even in extreme temperatures.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and a longer service life.Extreme vibration resistance: Up to 15 times more vibration resistant than conventional batteries, ideal for tough off-road use or heavy vibrations.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position.Long service life: Lasts up to three times longer than a conventional starter battery.Maximum performance for demanding vehiclesThe OPTIMA RedTop RT C 4.2 has been specifically developed for the extreme requirements of high-performance vehicles whose main requirement is a powerful starting impulse. It is the ideal choice for trucks, SUVs, hot rods, classic cars, and construction vehicles. It reliably provides the required energy to easily start large engines even during seasonal use or after long periods out of service. Its compact design and high power density also make it the perfect solution for vehicles with limited installation space.Superior SPIRALCELL TECHNOLOGY®The heart of each OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high purity lead spirals are used which are wrapped in a fibreglass mat (AGM). This compact and extremely stable design minimises plate spacing, maximises the active surface, and reduces internal resistance. The result is unmatched starting performance which can be delivered consistently even under the harshest conditions.Built for the most demanding conditionsThe OPTIMA RedTop is designed for the toughest use. Its sealed construction not only prevents acid leaks but also evaporation, making it completely maintenance-free. The robust construction from impact-resistant polypropylene and the extreme vibration resistance ensure that vibrations and shocks cannot affect the battery in demanding driving conditions. Features  ModelOPTIMA RedTop RT C 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)50 Cold start current EN (A)815 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionSAE car pole Weight (kg)approx. 17.6  FAQs about the OPTIMA RedTop BatteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant inner structure, a very low internal resistance for maximum starting currents, and a longer life compared to traditional batteries with flat plates. It is optimised for maximum starting performance.What is the difference between OPTIMA RedTop, YellowTop and BlueTop?RedTop: A pure high-performance starter battery for maximum starting power. Ideal for vehicles where the starting process is the main load. YellowTop: A dual-purpose battery (starting and supply) for vehicles with high energy requirements due to additional consumers (e.g. winch, large hi-fi systems). BlueTop: Specialist for marine and leisure vehicles, available as a pure starter battery or as a dual-purpose battery.Is this battery suitable for vehicles with many electrical consumers?The RedTop is primarily a starter battery. If your vehicle, in addition to starting, also has extensive equipment such as powerful hi-fi systems, additional headlights or a winch which is operated when stationary, an OPTIMA YellowTop or BlueTop (Dual Purpose) is the better choice, as these are designed for deep discharge cycles.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern microprocessor-controlled charger is recommended, which has a special charging curve for AGM batteries. This ensures complete and gentle charging, and maximises service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any dealer selling new batteries or to municipal recycling centres to ensure professional recycling.

The OPTIMA RedTop RT S 4.2 is a revolutionary high-performance starter battery that delivers maximum starting power in a compact and extremely robust housing thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V and a massive cold start current of 815 A, it is the ultimate solution for demanding vehicles that require a reliable and powerful start under all conditions. Its extreme vibration resistance and absolutely maintenance-free, leak-proof construction make it the first choice for hot rods, off-road vehicles, agricultural machinery and all vehicles that need more than just an ordinary battery.Highlights at a glanceMaximum starting power: Offers the highest possible starting performance for reliable engine starting even in extreme temperatures.SPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and longer service life.Extreme vibration resistance: Up to 15 times more vibration resistant than conventional batteries, ideal for tough off-road use or strong vibrations.Absolutely maintenance-free and leak-proof: The sealed AGM construction allows installation in almost any position.Long service life: Lasts up to three times longer than a conventional starter battery.Maximum performance for demanding vehiclesThe OPTIMA RedTop RT S 4.2 was specifically developed for the extreme demands of high-performance vehicles, whose main requirement is a powerful starting impulse. It is the ideal choice for trucks, SUVs, hot rods, classic cars and construction vehicles. Even in seasonal use or after long periods of downtime, it reliably provides the necessary power to start large engines effortlessly. Its compact design and high power density also make it the perfect solution for vehicles with limited installation space.Superior SPIRALCELL TECHNOLOGY®At the core of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, which are wrapped in a glass fibre mat (AGM). This compact and extremely robust design minimises the plate spacing, maximises the active surface area and reduces internal resistance. The result is unrivalled starting performance that can be delivered consistently even under the toughest conditions.Built for the most demanding conditionsThe OPTIMA RedTop is designed for tough use. Its sealed construction not only prevents acid leakage but also evaporation, making it absolutely maintenance-free. The robust construction made of impact-resistant polypropylene and the extreme vibration resistance ensure that vibrations and shocks in demanding driving conditions cannot affect the battery. Features  ModelOPTIMA RedTop RT S 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)50 Cold start current EN (A)815 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionSAE autopol & side terminals Weight (kg)approx. 17.6  FAQs about the OPTIMA RedTop BatteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant internal structure, a very low internal resistance for maximum starting currents and a longer service life compared to traditional batteries with flat plates. It is optimised for maximum starting performance.What is the difference between OPTIMA RedTop, YellowTop and BlueTop?RedTop: A pure high-performance starter battery for maximum starting power. Ideal for vehicles where the starting process is the main load. YellowTop: A dual-purpose battery (starting and supply) for vehicles with high energy demands due to additional devices (e.g. winch, large hi-fi systems). BlueTop: Specialist for marine and leisure vehicles, available as a pure starter battery or as a dual-purpose battery.Is this battery suitable for vehicles with lots of electrical consumers?The RedTop is primarily a starter battery. If your vehicle also includes extensive equipment such as powerful hi-fi systems, additional headlights or a winch that are operated when stationary, an OPTIMA YellowTop or BlueTop (dual purpose) is a better choice, as these are designed for deep discharge cycles.Which charger do I need for this AGM battery?For AGM batteries, especially OPTIMA batteries, a modern, microprocessor-controlled charger is recommended that has a special charging curve for AGM batteries. This ensures full and gentle charging and maximises service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer that sells new batteries or to municipal recycling centres to ensure proper recycling.

The OPTIMA RedTop RT S 4.2 is a revolutionary high-performance starter battery that, thanks to the patented SPIRALCELL TECHNOLOGY®, delivers maximum starting power in a compact and extremely robust case. With a rated voltage of 12 V and an enormous cold cranking current of 815 A, it is the ultimate solution for demanding vehicles that require reliable and powerful starting under all conditions. Its extreme vibration resistance and absolutely maintenance-free, spillproof construction make it the first choice for hot rods, off-road vehicles, agricultural machinery, and all vehicles that need more than just an ordinary battery.Highlights at a glanceMaximum starting power: Offers the highest possible starting performance for reliable engine starting even in extreme temperatures.SPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and a longer service life.Extreme vibration resistance: Up to 15 times more vibration-resistant than conventional batteries, ideal for tough off-road use or heavy vibration.Absolutely maintenance-free and spillproof: The sealed AGM construction allows installation in almost any position.Long service life: Lasts up to three times longer than a conventional starter battery.Maximum performance for demanding vehiclesThe OPTIMA RedTop RT S 4.2 was specifically developed for the extreme requirements of high-performance vehicles whose main requirement is a powerful starting impulse. It is the ideal choice for trucks, SUVs, hot rods, classic cars and construction vehicles. Even with seasonal use or longer downtimes, it reliably provides the necessary power to effortlessly start large engines. Its compact design and high power density also make it the perfect solution for vehicles with limited installation space.Superior SPIRALCELL TECHNOLOGY®At the core of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, wrapped in a glass fibre mat (AGM). This compact and extremely stable design minimises plate spacing, maximises the active surface and reduces internal resistance. The result is unsurpassed starting performance that can be delivered consistently even under the toughest conditions.Built for the most demanding conditionsThe OPTIMA RedTop is designed for tough use. Its sealed construction not only prevents acid leakage, but also evaporation, making it completely maintenance-free. The robust design made from impact-resistant polypropylene and the extreme vibration resistance ensure that vibrations and shocks during demanding driving have no effect on the battery. Features  ModelOPTIMA RedTop RT S 4.2 TechnologyAGM Spiralcell Rated voltage (V)12 Capacity (Ah)50 Cold cranking current EN (A)815 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionSAE Autopole & side terminals Weight (kg)approx. 17.6  FAQs about the OPTIMA RedTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant internal structure, a very low internal resistance for maximum starting currents and a longer lifespan compared to conventional batteries with flat plates. It is optimised for maximum starting performance.What is the difference between OPTIMA RedTop, YellowTop and BlueTop?RedTop: A pure high-performance starter battery for maximum starting power. Ideal for vehicles where starting is the main load. YellowTop: A dual-purpose battery (starting and supply) for vehicles with high energy needs due to additional consumers (e.g. winch, large hi-fi systems). BlueTop: Specialist for marine and leisure vehicles, available as a pure starter battery or as a dual-purpose battery.Is this battery suitable for vehicles with many electrical consumers?The RedTop is primarily a starter battery. If your vehicle, in addition to starting, also has extensive equipment such as powerful hi-fi systems, additional spotlights or a winch that are used when stationary, an OPTIMA YellowTop or BlueTop (dual purpose) is the better choice as they are designed for deep discharge cycles.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended that has a special charging curve for AGM batteries. This ensures complete and gentle charging and maximises service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper recycling.

The OPTIMA RedTop RT U 4.2 is a revolutionary high-performance starter battery that delivers maximum starting power in a compact and extremely robust housing thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V and an enormous cold starting current of 815 A, it is the ultimate solution for demanding vehicles that require a reliable and powerful start under all conditions. Its extreme vibration resistance and absolutely maintenance-free, leak-proof design make it the first choice for hot rods, off-road vehicles, agricultural machinery and all vehicles that need more than just an ordinary battery.Highlights at a glanceMaximum starting power: Offers the highest possible starting performance for reliable engine starts even at extreme temperatures.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and longer service life.Extreme vibration resistance: Up to 15 times more vibration-resistant than conventional batteries, ideal for rough off-road use or heavy vibrations.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position.Long service life: Lasts up to three times longer than a conventional starter battery.Maximum performance for demanding vehiclesThe OPTIMA RedTop RT U 4.2 has been specifically developed for the extreme demands of high-performance vehicles whose main requirement is a powerful starting impulse. It is the ideal choice for trucks, SUVs, hot rods, classic cars and construction machinery. Even in seasonal use or after longer periods of downtime, it reliably provides the necessary power to start large engines effortlessly. Its compact design and high power density also make it the perfect solution for vehicles with limited installation space.Superior SPIRALCELL TECHNOLOGY®The heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, highly pure lead spirals wrapped in glass fibre fleece (AGM) are used. This compact and extremely stable design minimises plate spacing, maximises the active surface area and reduces internal resistance. The result is unrivalled starting performance, which can be constantly achieved even under the toughest conditions.Built for the most demanding conditionsThe OPTIMA RedTop is engineered for tough use. Its sealed construction not only prevents acid leakage but also evaporation, making it completely maintenance-free. The robust construction made from impact-resistant polypropylene and its extreme vibration resistance ensure that the battery can withstand vibrations and shocks from demanding driving. Features  ModelOPTIMA RedTop RT U 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)50 Cold starting current EN (A)815 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionSAE car pole (positive pole left) Weight (kg)approx. 17.6  FAQs about the OPTIMA RedTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant internal structure, a very low internal resistance for maximum starting currents and a longer lifespan compared to traditional batteries with flat plates. It is optimised for maximum starting performance.What is the difference between OPTIMA RedTop, YellowTop and BlueTop?RedTop: A pure high-performance starter battery for maximum starting power. Ideal for vehicles where the starting process is the main load. YellowTop: A dual-purpose battery (starting and supply) for vehicles with high energy requirements due to additional consumers (e.g. winch, large hi-fi systems). BlueTop: Specialist for marine and leisure vehicles, available as a pure starter battery or as a dual-purpose battery.Is this battery suitable for vehicles with many electrical consumers?The RedTop is primarily a starter battery. If your vehicle, in addition to starting, is also equipped with comprehensive features such as powerful hi-fi systems, auxiliary headlights or a winch that are operated when stationary, an OPTIMA YellowTop or BlueTop (dual purpose) is the better choice, as these are designed for deep discharge cycles.Which charger do I need for this AGM battery?For AGM batteries, especially OPTIMA batteries, a modern, microprocessor-controlled charger is recommended that has a special charging curve for AGM batteries. This ensures complete and gentle charging and maximises lifespan.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries, or to municipal recycling centres free of charge to ensure proper recycling.

The OPTIMA YellowTop YT S 2.7 is a revolutionary high-performance AGM battery that, thanks to the patented SPIRALCELL TECHNOLOGY®, combines the maximum starting power of a starter battery with the cycle stability of a supply battery. With a nominal voltage of 12 V, a capacity of 38 Ah and a high cold start current, it is the ultimate solution for modern vehicles with extensive electrical equipment, high-performance hi-fi systems or demanding off-road accessories in a compact design.Highlights at a glanceDual-purpose functionality: Maximum starting performance and excellent cycle stability in one battery.SPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and longer service life.High cycle stability: Ideal for vehicles with many electrical consumers and for repeated deep discharges.Absolutely maintenance-free and leak-proof: The sealed AGM construction enables installation in almost any position.Compact design: High performance for vehicles with limited installation space.Maximum performance for demanding vehiclesThe OPTIMA YellowTop YT S 2.7 was specifically developed for the extreme requirements of modern vehicles that go far beyond mere starting. It is the ideal choice for vehicles with complex sound systems, additional headlights, winches and other energy-intensive consumers. Even in vehicles with seasonal use or many short journeys, which put a heavy strain on conventional batteries, the YellowTop demonstrates its superior performance and longevity.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, highly pure lead spirals are used, which are wrapped in a glass fibre fleece (AGM). This compact and extremely stable design minimises internal resistance, resulting in outstanding starting power, faster charging and unsurpassed vibration resistance. This technology makes the YellowTop the perfect hybrid solution for starting and supplying.Built for the most demanding conditionsThe OPTIMA YellowTop is designed for harsh use. Its sealed construction prevents not only acid leakage but also evaporation, making it absolutely maintenance-free. The robust construction made of impact-resistant polypropylene and up to 15 times higher vibration resistance compared to conventional batteries ensure that vibrations and shocks in demanding driving conditions cannot harm the battery. Features  ModelOPTIMA YellowTop YT S 2.7 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)38 Cold start current EN (A)460 Dimensions (L x W x H in mm)237 x 129 x 227 ConnectionSAE auto post & side connections Weight (kg)approx. 11.8  FAQs about the OPTIMA YellowTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, a very low internal resistance for high starting currents and excellent cycle stability. It combines the benefits of a starter battery with those of a deep-cycle battery in a single product.What is the difference between OPTIMA YellowTop and RedTop?YellowTop: A dual-purpose battery (starting and supply). It is ideal for vehicles with high energy requirements due to additional consumers (e.g. winch, large hi-fi systems), as it tolerates deep discharges. RedTop: A pure high-performance starter battery for maximum cranking power. It is the right choice when starting is the main load and no deep discharge cycles occur.For which vehicles is this compact model particularly suitable?The YT S 2.7 is ideal due to its narrower design for vehicles with limited space in the engine bay, such as many European and Asian models, as well as for custom car projects. Despite its compact size, it supplies enough power for demanding starting procedures and the operation of additional equipment.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended, which has a special charging curve for AGM batteries. This ensures a complete and gentle charge and maximises the lifespan.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer that sells new batteries or to municipal recycling centres to ensure proper recycling.

The OPTIMA YellowTop YT S 2.7 J is a revolutionary high-performance AGM battery that combines the maximum starting power of a starter battery with the cycle life of a supply battery thanks to its patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V, a capacity of 38 Ah and a high cold cranking current, it is the ultimate solution for modern vehicles with extensive electrical equipment, powerful hi-fi systems or demanding off-road accessories in a compact form factor.Highlights at a glanceDual-purpose functionality: Maximum starting performance and excellent cycle life in a single battery.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and longer service life.High cycle life: Ideal for vehicles with many electrical consumers and for repeated deep discharges.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position.Compact design: High performance for vehicles with limited installation space, especially Asian models.Maximum performance for demanding vehiclesThe OPTIMA YellowTop YT S 2.7 J has been purpose-designed for the extreme demands of modern vehicles, which go far beyond simply starting the engine. It is the ideal choice for vehicles with sophisticated sound systems, additional headlights, winches and other energy-intensive consumers. The YellowTop also demonstrates its superior performance and longevity in vehicles used seasonally or for frequent short trips that put a heavy strain on conventional batteries.Superior SPIRALCELL TECHNOLOGY®The heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, highly pure lead spirals are used and wrapped with glass fibre fleece (AGM). This compact and extremely robust design minimises internal resistance, resulting in outstanding starting power, faster charging and unsurpassed resistance to vibration. This technology makes the YellowTop the perfect hybrid solution for starting and supplying.Built for the toughest conditionsThe OPTIMA YellowTop is designed for tough applications. Its sealed construction not only prevents acid leakage, but also evaporation, making it completely maintenance-free. The robust housing made from impact-resistant polypropylene and its up to 15 times higher vibration resistance compared to conventional batteries ensure that vibration and shocks in demanding driving conditions cannot harm the battery. Features  ModelOPTIMA YellowTop YT S 2.7 J TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)38 Cold cranking current EN (A)460 Dimensions (L x W x H in mm)237 x 129 x 227 ConnectionJIS terminal posts & side connections Weight (kg)approx. 11.8  FAQs about the OPTIMA YellowTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, very low internal resistance for high starting currents as well as excellent cycle life. It combines the benefits of a starter and deep-cycle battery in a single product.What is the difference between OPTIMA YellowTop and RedTop?YellowTop: A dual-purpose battery (starting and supply). It is ideal for vehicles with high energy requirements from additional consumers (e.g. winch, large hi-fi systems), as it can tolerate deep discharges. RedTop: A pure high-performance starter battery for maximum starting power. It is the right choice when starting is the main load and there is no deep discharge cycles.What does the suffix "J" in the model name mean?The letter "J" in the model designation YT S 2.7 J stands for "JIS" (Japanese Industrial Standard). This means that the battery has the narrower, tapered battery posts typically used in Japanese and other Asian vehicle brands.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger with a special AGM charging profile is recommended. This ensures a complete and gentle charge and maximises battery lifetime.How should this lead-acid battery be disposed of?Lead-acid batteries contain substances harmful to the environment and must not be disposed of in household waste. You can return your old battery free of charge to any dealer selling new batteries or to municipal collection points to ensure proper recycling.

The OPTIMA YellowTop YT R 2.7 J is a revolutionary high-performance AGM battery that combines the maximum starting power of a starter battery with the cycle stability of a supply battery thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V, a capacity of 38 Ah and a high cold-start current, it is the ultimate solution for modern vehicles with extensive electrical equipment, powerful hi-fi systems or demanding off-road accessories. Its extreme vibration resistance and absolutely maintenance-free, leak-proof design make it the first choice for the most demanding applications.Highlights at a glanceDual-purpose functionality: Maximum starting power and excellent cycle stability in one battery.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and a longer service life.High cycle stability: Ideal for vehicles with many electrical consumers and for repeated deep discharges.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position.Fast recharge: Absorbs charge significantly faster than conventional batteries.Maximum performance for demanding vehiclesThe OPTIMA YellowTop YT R 2.7 J was developed specifically for the extreme requirements of modern vehicles, which go far beyond mere starting. It is the ideal choice for vehicles with sophisticated sound systems, auxiliary headlights, winches, hydraulic systems and other energy-intensive consumers. The YellowTop also proves its superior performance and longevity in vehicles with seasonal use or many short journeys that place a heavy load on conventional batteries.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, which are wrapped in a glass fibre fleece (AGM). This compact and extremely stable design minimises plate spacing and internal resistance, resulting in outstanding starting power, faster charging and unsurpassed vibration resistance. This technology makes the YellowTop the perfect hybrid solution for starting and supplying.Built for the most demanding conditionsThe OPTIMA YellowTop is designed for tough applications. Its sealed construction not only prevents acid leakage but also evaporation, making it completely maintenance-free. The robust construction made of impact-resistant polypropylene and the up to 15 times higher vibration resistance compared to conventional batteries ensure that vibrations and shocks cannot harm the battery in demanding driving conditions. Battery features  ModelOPTIMA YellowTop YT R 2.7 J TechnologyAGM Spiralcell Rated voltage (V)12 Capacity (Ah)38 Cold start current EN (A)460 Dimensions (L x W x H in mm)237 x 129 x 227 ConnectionJIS terminals (positive terminal right) Weight (kg)approx. 11.8  FAQs about the OPTIMA YellowTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant internal structure, very low internal resistance for high starting currents and excellent cycle stability. It combines the advantages of a starter battery with those of a deep-cycle battery in a single product.What is the difference between OPTIMA YellowTop and RedTop?YellowTop: A dual-purpose battery (starting and supply). It is ideal for vehicles with high energy requirements due to additional consumers (e.g. winches, large hi-fi systems) as it can withstand deep discharges. RedTop: A pure high-performance starter battery for maximum starting power. It is the right choice if the starting process is the main load and there are no deep discharge cycles.What does the suffix "J" in the model name mean?The letter "J" in the model designation YT R 2.7 J stands for "JIS" (Japanese Industrial Standard). This means that the battery has the narrower, conical battery terminals that are typically used in Japanese and other Asian vehicle brands.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended, which has a special charging cycle line for AGM batteries. This ensures a complete and gentle charge and maximises the service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any retailer that sells new batteries or to municipal recycling centres free of charge to ensure that it is recycled properly.

The OPTIMA YellowTop YT S 4.2 is a revolutionary high-performance AGM battery that, thanks to the patented SPIRALCELL TECHNOLOGY®, combines the maximum starting power of a starter battery with the cycle stability of a supply battery. With a nominal voltage of 12 V, a high capacity of 55 Ah and enormous cold-start current, it is the ultimate solution for modern vehicles with extensive electrical equipment, commercial vehicles in demanding continuous use or off-road vehicles with winches and additional lighting.Highlights at a glanceDual-purpose functionality: Maximum starting power and excellent cycle stability in one battery.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and a longer service life.High cycle stability: Ideal for vehicles with many electrical consumers and for repeated deep discharges.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position.Fast recharge: Absorbs charge significantly faster than conventional batteries.Maximum performance for demanding vehiclesThe OPTIMA YellowTop YT S 4.2 was developed specifically for the extreme demands of modern vehicles, which go far beyond just starting. It is the ideal choice for vehicles with sophisticated sound systems, auxiliary headlights, winches, hydraulic systems and other energy-intensive consumers. Even in vehicles with seasonal use, in demanding short-distance operation or in construction vehicles, the YellowTop proves its superior performance and durability.Superior SPIRALCELL TECHNOLOGY®The heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, wrapped in a glass-fibre mat (AGM). This compact and extremely stable design minimises internal resistance, resulting in outstanding starting power, faster charging and unsurpassed vibration resistance. This technology makes the YellowTop the perfect hybrid solution for starting and supplying.Built for the most demanding conditionsThe OPTIMA YellowTop is designed for tough use. Its sealed construction not only prevents acid leakage but also evaporation, making it completely maintenance-free. The robust construction made of impact-resistant polypropylene and the up to 15 times higher resistance to vibration compared to conventional batteries ensure that vibrations and shocks encountered in demanding driving conditions do not harm the battery. Features  ModelOPTIMA YellowTop YT S 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)55 Cold start current EN (A)765 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionSAE autopol & side terminals Weight (kg)approx. 19.9  FAQs about the OPTIMA YellowTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, very low internal resistance for high starting currents as well as excellent cycle stability. It combines the advantages of a starter battery with those of a deep-cycle battery in a single product.What is the difference between OPTIMA YellowTop and RedTop?YellowTop: A dual-purpose battery (starting and supply). It is ideal for vehicles with high power requirements due to additional consumers (e.g. winches, large hi-fi systems), as it can withstand deep discharges. RedTop: A pure high-performance starter battery for maximum starting power. It is the right choice if starting is the main load and there are no deep discharge cycles.Is this battery suitable for vehicles with automatic start-stop?Although the YellowTop is very cycle-resistant, it was not specifically developed for the requirements of modern start-stop systems. For vehicles with start-stop technology, batteries with EFB or AGM technology in standard form, which are explicitly designed for this purpose, are recommended.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended, which has a special charging curve for AGM batteries. This ensures complete and gentle charging and maximises service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer that sells new batteries or to municipal recycling centres to ensure professional recycling.

The OPTIMA YellowTop YT U 4.2 is a revolutionary high-performance AGM battery that combines the maximum starting power of a starter battery with the cycle stability of a supply battery thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V, a high capacity of 55 Ah and an enormous cold start current, it is the ultimate solution for modern vehicles with extensive electrical equipment, commercial vehicles in demanding continuous use or off-road vehicles with winches and additional lighting.Highlights at a glanceDual-purpose functionality: Maximum starting power and excellent cycle stability in one battery.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and a longer service life.High cycle stability: Ideal for vehicles with many electrical consumers and for repeated deep discharges.Absolutely maintenance-free and leak-proof: The sealed AGM construction allows installation in almost any position.Versatile connections: Equipped with standard round terminals (SAE) and US side terminals (GM) for maximum compatibility.Maximum performance for demanding vehiclesThe OPTIMA YellowTop YT U 4.2 was developed specifically for the extreme requirements of modern vehicles, which go far beyond mere starting. It is the ideal choice for vehicles with sophisticated sound systems, auxiliary headlights, winches, hydraulic systems and other energy-intensive consumers. The YellowTop also proves its superior performance and durability in vehicles with seasonal use, in demanding short-distance operation or in construction vehicles.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high purity lead spirals are used, which are wrapped in a glass fibre fleece (AGM). This compact and extremely stable design minimises internal resistance, resulting in outstanding starting power, faster charging and unsurpassed vibration resistance. This technology makes the YellowTop the perfect hybrid solution for starting and supply.Built for the most demanding conditionsThe OPTIMA YellowTop is designed for tough use. Its sealed construction not only prevents acid leakage but also evaporation, making it absolutely maintenance-free. The rugged construction made of impact-resistant polypropylene and up to 15x higher vibration resistance compared to conventional batteries ensure that vibrations and shocks in demanding driving conditions cannot harm the battery. Features  ModelOPTIMA YellowTop YT U 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)55 Cold start current EN (A)765 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionSAE car terminal (positive terminal left) Weight (kg)approx. 19.9  FAQs about the OPTIMA YellowTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant internal structure, a very low internal resistance for high starting currents and excellent cycle stability. It combines the advantages of a starter battery with those of a deep-cycle battery in one product.What is the difference between OPTIMA YellowTop and RedTop?YellowTop: A dual-purpose battery (starting and supply). It is ideal for vehicles with high energy requirements due to additional consumers (e.g. winch, large hi-fi systems), as it can withstand deep discharges. RedTop: A pure high-performance starter battery for maximum starting power. It is the right choice when the starting process is the main load and there are no deep discharge cycles.What is the advantage of the double connections (SAE & GM)?The combination of the top-mounted standard round terminals (SAE) and the side threaded terminals (GM standard) offers maximum flexibility. You can connect the main vehicle cables to one type of terminal and accessories such as winches, compressors or hi-fi amplifiers simply and tidily to the second set of terminals.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended, which has a special charging profile for AGM batteries. This ensures a complete and gentle charge and maximises service life.How should this lead-acid battery be disposed of?Lead acid batteries contain environmentally hazardous substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper disposal.

The OPTIMA YellowTop YT S 5.5 is a revolutionary high-performance AGM battery that combines the maximum starting power of a starter battery with the cycle stability of a supply battery thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V, a very high capacity of 75 Ah and an extreme cold start current, it is the ultimate solution for the most demanding vehicles with enormous energy needs, such as construction vehicles, lorries or heavily modified off-road vehicles.Highlights at a glanceDual-purpose functionality: Maximum starting power and excellent cycle stability in a single battery.SPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and a longer service life.High cycle stability: Ideal for vehicles with many electrical consumers and for repeated deep discharges.Absolutely maintenance-free and leak-proof: The sealed AGM construction allows installation in almost any position.Fast recharging: Absorbs charge significantly faster than conventional batteries.Maximum performance for demanding vehiclesThe OPTIMA YellowTop YT S 5.5 was specifically developed for the most extreme requirements of modern vehicles, which go far beyond mere starting. It is the ideal choice for vehicles with complex sound systems, auxiliary headlights, winches, hydraulic systems and other energy-intensive consumers. Even in vehicles with seasonal use, in demanding short-distance operation or in construction vehicles, the YellowTop demonstrates its superior performance and longevity.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, which are wrapped with a glass fibre separator (AGM). This compact and extremely stable design minimises internal resistance, resulting in outstanding starting power, faster recharging, and unsurpassed vibration resistance. This technology makes the YellowTop the perfect hybrid solution for starting and supply.Built for the most demanding conditionsThe OPTIMA YellowTop is designed for hard use. Its sealed design not only prevents acid leakage, but also evaporation, making it absolutely maintenance-free. The robust construction of impact-resistant polypropylene and up to 15 times greater vibration resistance compared to conventional batteries ensure that vibrations and shocks in demanding driving conditions cannot affect the battery. Features  ModelOPTIMA YellowTop YT S 5.5 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)75 Cold start current EN (A)975 Dimensions (L x W x H in mm)325 x 165 x 238 ConnectionSAE autopol & side connections Weight (kg)approx. 26.5  FAQs about the OPTIMA YellowTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, very low internal resistance for high starting currents, as well as excellent cycle stability. It combines the advantages of a starter battery with those of a deep-cycle battery in a single product.What is the difference between OPTIMA YellowTop and RedTop?YellowTop: A dual-purpose battery (starting and supply). It is ideal for vehicles with high energy demands from additional consumers (e.g. winches, large hi-fi systems), as it can withstand deep discharges. RedTop: A pure high-performance starter battery for maximum starting power. It is the right choice if the starting process is the main load and there are no deep discharge cycles.Is this battery suitable for vehicles with automatic start-stop?Although the YellowTop is very cycle-resistant, it was not specifically designed for the requirements of modern start-stop systems. For vehicles with start-stop technology, batteries with EFB or AGM technology in standard design, which are explicitly designed for this purpose, are recommended.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended, which has a special charge curve for AGM batteries. This ensures a complete and gentle charge and maximises service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer who sells new batteries or to local recycling centres to ensure proper disposal.

The OPTIMA BlueTop BT DC 4.2 is a revolutionary high-performance AGM battery that, thanks to the patented SPIRALCELL TECHNOLOGY®, offers exceptional performance as both a starter and deep-cycle supply battery. With a nominal voltage of 12 V, a capacity of 55 Ah and enormous starting power, it is the ultimate solution for demanding marine and leisure vehicles. Its extreme vibration resistance and fully maintenance-free, leak-proof construction make it the most reliable choice for anyone who needs maximum performance and operational safety both on the water and on the road.Highlights at a glanceSPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and longer service life.Dual-purpose functionality: Outstanding performance as a starter battery for the engine and as a cycle-proof supply battery for the on-board electronics.Extreme vibration resistance: Up to 15 times more vibration resistant than conventional batteries, ideal for tough use on the water.Absolutely maintenance-free and leak-proof: The sealed AGM construction allows installation in almost any position.High charging efficiency: Charges back up significantly faster than conventional lead-acid batteries.Maximum performance for marine and leisure vehiclesThe OPTIMA BlueTop BT DC 4.2 has been developed specifically for the extreme demands in marine and motorhome applications. It delivers the massive power needed to start boat engines and at the same time reliably and long-lastingly supplies energy-hungry consumers such as trolling motors, sound systems, navigation devices and the galley. Its ability to withstand hundreds of charge and discharge cycles makes it the perfect all-in-one solution for a long and carefree day on the water or on holiday.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, which are wrapped with a glass-fibre mat (AGM). This compact and extremely stable design minimises the plate gap, maximises the active surface area and reduces internal resistance. The result is an unrivalled starting performance, extreme vibration resistance, longer service life and faster rechargeability.Built for the most demanding conditionsThe OPTIMA BlueTop is designed for tough use. Its sealed construction not only prevents acid leakage but also evaporation, making it completely maintenance-free. The robust construction and extreme vibration resistance ensure that waves, vibrations and shocks cannot harm the battery. Thanks to its low self-discharge, it is also the ideal choice for seasonal use. Features  ModelOPTIMA BlueTop BT DC 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)55 Cold start current EN (A)765 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionDual connection (SAE autopole & threaded stud) Weight (kg)approx. 19.9  FAQs about the OPTIMA BlueTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, a very low internal resistance for high starting currents and a longer service life compared to traditional batteries with flat plates. It combines the benefits of a starter battery with those of a deep-cycle battery.What is the difference between OPTIMA BlueTop, YellowTop and RedTop?BlueTop: Specialist for marine and leisure vehicles, often with additional threaded connections. Available as a pure starter battery (dark grey housing) and as a dual-purpose battery (light grey housing) like this model. YellowTop: A pure dual-purpose battery for land vehicles with high energy requirements (e.g. off-road vehicles with winch, large hi-fi systems). RedTop: A pure high-performance starter battery for maximum starting power.Which charger do I need for this AGM battery?For AGM batteries, and especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended which has a special charging profile for AGM batteries. This ensures complete and gentle charging and maximises the service life.Can I install the battery in any position?Yes, thanks to the sealed AGM spiral cell construction, the battery is leak-proof and can be mounted in almost any position, offering additional flexibility when installing in tight spaces on boats or motorhomes.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge at any retailer selling new batteries or at municipal recycling centres to ensure proper disposal.

The OPTIMA BlueTop BT DC 5.0 is a revolutionary high-performance AGM battery which, thanks to the patented SPIRALCELL TECHNOLOGY®, offers exceptional performance as a starter and deep-cycle supply battery. With a nominal voltage of 12 V, a high capacity of 66 Ah and enormous starting power, it is the ultimate solution for demanding marine and leisure vehicles. Its extreme vibration resistance and the absolutely maintenance-free, leak-proof construction make it the most reliable choice for anyone who needs maximum performance and operational reliability on the water and on the road.Highlights at a glanceSPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and a longer service life.Dual-purpose functionality: Outstanding performance as a starter battery for the engine and as a cycle-resistant supply battery for the on-board electronics.Extreme vibration resistance: Up to 15 times more vibration-resistant than conventional batteries, ideal for tough use on the water.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position.High charging efficiency: Recharges significantly faster than conventional lead-acid batteries.Maximum performance for marine and leisure vehiclesThe OPTIMA BlueTop BT DC 5.0 was specifically developed for the extreme demands in the marine and motorhome sectors. It delivers the massive power required to start boat engines and at the same time reliably and durably supplies power-hungry consumers such as trolling motors, sound systems, navigation devices and the galley. Its ability to withstand hundreds of charge and discharge cycles makes it the perfect all-in-one solution for a long and carefree day on the water or on holiday.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, wrapped in glass fibre mat (AGM). This compact and extremely stable design minimises plate spacing, maximises the active surface area and reduces internal resistance. The result is unrivalled starting performance, extreme vibration resistance, longer life and faster rechargeability.Built for the most demanding conditionsThe OPTIMA BlueTop is designed for heavy-duty use. Its sealed construction not only prevents acid leaks but also evaporation, making it absolutely maintenance-free. The robust build and extreme vibration resistance ensure that wave impact, vibrations and shocks cannot harm the battery. Thanks to its low self-discharge, it is also the ideal choice for seasonal use. Features  ModelOPTIMA BlueTop BT DC 5.0 TechnologyAGM Spiralcell Rated voltage (V)12 Capacity (Ah)66 Cold start current EN (A)845 Dimensions (L x W x H in mm)309 x 175 x 200 ConnectionDual connection (SAE Autopole & threaded stud) Weight (kg)approx. 23.1  FAQs about the OPTIMA BlueTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, a very low internal resistance for high starting currents and a longer life compared to traditional batteries with flat plates. It combines the advantages of a starter battery with those of a deep-cycle battery.What is the difference between OPTIMA BlueTop, YellowTop and RedTop?BlueTop: Specialist for marine and leisure vehicles, often with additional threaded connections. Available as a pure starter battery (dark grey housing) and as a dual-purpose battery (light grey housing) like this model. YellowTop: A pure dual-purpose battery for land vehicles with high energy requirements (e.g. off-road vehicles with winch, large hi-fi systems). RedTop: A pure high-performance starter battery for maximum starting power.Which charger do I need for this AGM battery?For AGM batteries, especially OPTIMA batteries, a modern, microprocessor-controlled charger with a special charging characteristic for AGM batteries is recommended. This ensures a complete and gentle charge and maximises service life.Can I install the battery in any position?Yes, thanks to the sealed AGM spiral cell design, the battery is leak-proof and can be mounted in almost any position, offering additional flexibility for installation in tight spaces on boats or motorhomes.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery to any retailer that sells new batteries or at local recycling centres free of charge to ensure proper recycling.

The OPTIMA BlueTop BT DC 5.5 is a revolutionary high-performance AGM battery that offers exceptional performance as a starter and deep-cycle supply battery thanks to the patented SPIRALCELL TECHNOLOGY®. With a nominal voltage of 12 V, a high capacity of 75 Ah and enormous starting power, it is the ultimate solution for demanding marine and leisure vehicles. Its extreme vibration resistance and absolutely maintenance-free, leak-proof construction make it the most reliable choice for anyone who needs maximum performance and operational safety on the water and on the road.Highlights at a glanceSPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and a longer service life.Dual-purpose functionality: Superior performance as a starter battery for the engine and as a cycle-stable supply battery for the on-board electronics.Extreme vibration resistance: Up to 15 times more vibration resistant than conventional batteries, ideal for tough use on the water.Absolutely maintenance free and leak-proof: The sealed AGM construction enables installation in almost any position.High charging efficiency: Charges much faster than conventional lead-acid batteries.Maximum performance for marine and leisure vehiclesThe OPTIMA BlueTop BT DC 5.5 was specifically developed for the extreme requirements in the marine and motorhome sector. It delivers the massive power needed to start large boat engines, while also reliably and durably supplying energy-intensive consumers such as trolling motors, sound systems, navigation devices and the on-board kitchen. Its ability to withstand hundreds of charging and discharging cycles makes it the perfect all-in-one solution for a long, carefree day on the water or on holiday.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, highly pure lead spirals are used, which are wrapped in a glass fibre mat (AGM). This compact and extremely stable design minimises plate spacing, maximises the active surface area and reduces internal resistance. The result is unsurpassed starting performance, extreme vibration resistance, longer service life and faster recharging capability.Built for the most demanding conditionsThe OPTIMA BlueTop is designed for tough use. Its sealed construction not only prevents acid leakage, but also evaporation, making it absolutely maintenance free. The robust design and extreme vibration resistance ensure that waves, vibrations and shocks cannot damage the battery. Thanks to its low self-discharge, it is also the ideal choice for seasonal operation. Characteristics ModelOPTIMA BlueTop BT DC 5.5 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)75 Cold start current EN (A)975 Dimensions (L x W x H in mm)325 x 165 x 238 ConnectionDual connection (SAE autopole & threaded stud) Weight (kg)approx. 26.5  FAQs about the OPTIMA BlueTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology ensures an extremely robust and vibration-resistant internal structure, a very low internal resistance for high starting currents and a longer service life compared to traditional batteries with flat plates. It combines the advantages of a starter battery with those of a deep-cycle battery.What is the difference between OPTIMA BlueTop, YellowTop and RedTop?BlueTop: Specialist for marine and leisure vehicles, often with additional threaded connections. Available as a pure starter battery (dark grey housing) and as a dual-purpose battery (light grey housing) like this model. YellowTop: A pure dual-purpose battery for land vehicles with high energy requirements (e.g. off-road vehicles with winches, large hi-fi systems). RedTop: A pure high-performance starter battery for maximum starting power.Which charger do I need for this AGM battery?For AGM batteries, especially for OPTIMA batteries, a modern microprocessor-controlled charger with a specific charging curve for AGM batteries is recommended. This ensures a complete and gentle charge and maximises service life.Can I install the battery in any position?Yes, thanks to the sealed AGM spiral cell construction, the battery is leak-proof and can be installed in almost any position, providing extra flexibility when fitting in confined spaces on boats or motorhomes.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any dealer who sells new batteries or to local recycling centres to ensure proper disposal.

The Exide Sprinter XP12V3000 is a compact, maintenance-free VRLA lead-acid battery solution with AGM technology. It was designed for applications with very high discharge currents and is ideal for UPS systems, safety power supplies and telecommunications. Thanks to its high power density, short recharge times and long service life, it offers maximum availability with low maintenance requirements.Highlights at a glance2350 W per block at 15 minutes (1.60 V/cell, 25 °C)Nominal capacity 92.8 Ah at C10 (1.80 V/cell, 25 °C)Very high high-current capability for short discharge timesMaintenance-free due to AGM with 99 percent gas recombinationDesign Life 10 to 12 years according to EUROBAT High PerformanceLow self-discharge for extended storage lifeMaximum high-current power for UPS and safetyThe XP12V3000 reliably delivers very high currents at critical moments. With up to 2350 W per block at 15 minutes and a short-circuit current of 2425 A, it ensures the required power for UPS backup, emergency lighting and hazard warning technology. The low internal resistance of 5.2 mΩ supports a stable power supply even during peak loads.Quickly ready for use again with high availabilityThe AGM separators enable short recharge times, so systems are quickly ready for operation again. The low self-discharge reduces maintenance costs and enables longer storage intervals, which sustainably lowers operating costs.AGM high-current design of the Sprinter XP seriesThe electrolyte solution bonded in glass mat ensures efficient gas recombination and fully sealed operation without topping up with water. Grids made of a corrosion-resistant lead-calcium alloy increase service life. The optional UL 94-V0 housing version and UL certification increase safety in data centre and industrial environments.Features  ModelExide Sprinter XP12V3000 Battery typeVRLA AGM (High-Rate / UPS) Rated voltage (V)12 Capacity (Ah)89.5 (at 10h rate) Short-circuit current (A)3300 Charging voltage (float charge)13.62V (at 20°C) Charging voltage (boost charge)14.1V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service life12 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)309 x 172 x 239 Weight (kg)approx. 32.5 ConnectionM6 screw terminal CertificationsISO 9001, ISO 14001, UL  FAQs about the Exide Sprinter XP12V3000For which applications is the XP12V3000 particularly suitable?The battery is optimised for UPS systems, emergency lighting, hazard warning technology and other applications with short, high-current discharge operations.Is the XP12V3000 maintenance-free?Yes, thanks to AGM technology with high gas recombination, no topping up with water is required, operation is sealed and maintenance-free.What service life can be expected?The design corresponds to 10 to 12 years according to EUROBAT High Performance, provided the recommended operating and ambient conditions are observed.Is there a flame-retardant housing option?Yes. In addition to the standard version, a flame-retardant version in accordance with UL 94-V0 is available.Is the battery subject to transport restrictions?No, ready-to-use batteries are unrestricted for transport in accordance with IATA A67 and may be shipped by road, rail, water and air. 

The Sonnenschein A412/32 A is an absolutely maintenance-free lead-gel block battery, developed for the highest demands on operational safety and an extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a capacity of 32 Ah, it is the ideal energy source for fail-safe emergency power supplies in security technology, UPS systems and medical technology.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free over the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant housing for use under demanding conditions.Low self-discharge: High storage capability and always ready for use in an emergency.Maximum security of supply for critical infrastructureThe Sonnenschein A412/32 A is the specialist for standby parallel operation (standby use), where immediate and reliable energy supply in the event of a mains failure is crucial. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and safety lighting systems, fire detection and alarm systems, as well as power supply in hospitals and telecommunications facilities.Proven Dryfit® gel technologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, binds the electrolyte in a thixotropic silica gel. This makes the battery not only completely leak-proof and maintenance-free, but also ensures excellent cycle stability and very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient without the need to top up with water.Developed for longevity and reliabilityThe A400 series was developed for maximum cost-effectiveness over the entire service life. The extremely long useful life of 12 years and more significantly reduces the need for costly and time-consuming battery replacements in fixed installed systems. The high production quality and the use of high-purity materials ensure consistent performance and thus contribute to the high operational safety of the overall system. Features  ModelSonnenschein A412/32 A ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)32 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)210 x 176 x 174 ConnectionStandard “Autopol” (SAE) Weight (kg)approx. 14.5  FAQs about the Sonnenschein A412/32 A lead-gel batteryWhat is the main advantage of Dryfit® Gel technology?The key advantage is the combination of absolute maintenance-free operation, highest cycle stability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and provide very consistent performance over a long period of time, which makes them the premium solution for critical standby applications.What does the "Eurobat Long Life" classification mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is intended for a service life of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct float charging).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this is optimised for standby parallel operation. It is permanently kept at a constant voltage (float charge) and only rarely needs to deliver energy. A starter battery is designed for short-term high currents. A solar battery (cycle battery) is optimised for daily deep discharge and recharge.How must this lead-acid battery be disposed of?Lead-acid batteries contain substances that are harmful to the environment and must not be disposed of with household waste. You can return your old battery to any retailer who sells new batteries or to municipal recycling depots free of charge to ensure proper disposal.

The Sonnenschein A412/50 F10 is an absolutely maintenance-free lead-gel block battery that has been developed for the highest requirements for operational safety and an extremely long service life in professional standby applications. As part of the globally proven A400 series featuring Dryfit® gel technology, this battery delivers exceptional reliability. With a nominal voltage of 12V and a capacity of 50 Ah, it is the ideal power source for fail-safe emergency power supplies in security technology, UPS systems, and medical engineering.Highlights at a glanceSuperior Dryfit® Gel Technology: Absolutely maintenance-free throughout its entire service life, ultimate reliability, and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and longer) according to Eurobat for maximum investment security.High cycle stability and deep discharge protection: Provides excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant casing for use in demanding conditions.Low self-discharge: High storage capability and always ready for use in any emergency.Maximum supply security for critical infrastructureThe Sonnenschein A412/50 F10 is the specialist for standby parallel operation (standby use), where immediate and reliable transfer of energy in case of power failure is vital. Its main areas of application are uninterruptible power supplies (UPS) for computer and server systems, emergency and security lighting systems, fire and alarm systems as well as energy supply in hospitals and telecommunications systems.Proven Dryfit® Gel TechnologyThe Dryfit® gel technology, invented and perfected by Sonnenschein, retains the electrolyte in a thixotropic silica gel. This not only makes the battery fully leak-proof and maintenance-free, but also ensures excellent cycle stability and a very low self-discharge rate. The internal gas recombination protects against capacity loss and ensures particularly safe and efficient operation, without the need for water refilling.H2: Developed for longevity and reliabilityThe A400 series was designed for maximum cost-effectiveness throughout its entire service life. Its extremely long service life of 12 years or more significantly reduces the necessity for costly and tedious battery replacements in permanently installed systems. The high manufacturing quality and the usage of highly pure materials ensure consistent performance and contribute to the high operational safety of the overall facility. Properties  ModelSonnenschein A412/50 F10 ApplicationStandby / UPS / Telecommunications TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)50 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)278 x 175 x 190 ConnectionF10 (M8 internal thread) Weight (kg)approx. 21.0  FAQs about the Sonnenschein A412/50 F10 lead-gel batteryWhat is the main advantage of Dryfit® Gel Technology?The decisive advantage lies in the combination of total maintenance freedom, highest cycle stability, and extreme longevity. Compared to AGM batteries, gel batteries are often even more resilient against deep discharges and provide a very consistent level of performance over a long time, making them the premium solution for critical standby applications.What does the "Eurobat Long Life" classification mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected service life of 12 years or longer under defined standby conditions (typically 20°C ambient temperature and correct standby charging).What is the difference between the F10 and the A connection?Both are internally threaded connections. The F10 connection has an M10 thread, while the A connection (or G6) generally features a smaller M6 thread. The F10 connection is designed for applications with higher currents and larger cable cross-sections.How should this lead battery be disposed of?Lead batteries contain substances that are harmful to the environment and must not be disposed of in household waste. You can return your old battery free of charge to any retailer selling new batteries or to municipal recycling centres to ensure proper recycling.

The Sonnenschein A412/180 F10 is an absolutely maintenance-free lead-gel block battery with very high capacity, designed for the highest demands on operational safety and extremely long service life in professional standby applications. As part of the globally proven A400 series with Dryfit® gel technology, this battery offers exceptional reliability. With a nominal voltage of 12V and a very high capacity of 180 Ah, it is the ideal energy source for fail-safe emergency power supplies in large industrial plants, data centres and safety-relevant systems.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout the entire service life, maximum reliability and leak-proof.Extreme longevity: Classified as "Long Life" (12 years and more) according to Eurobat for maximum investment security.Very high capacity: 180 Ah for maximum bridging times during power failures.High cycle stability and deep discharge protection: Offers excellent recovery even after deep discharges.Robust construction: Reinforced, impact-resistant casing for use under demanding conditions.Maximum supply security for critical infrastructureThe Sonnenschein A412/180 F10 is the specialist for standby parallel operation (standby use), where immediate and reliable energy handover is crucial in the event of power failure. Its main areas of application are large uninterruptible power supplies (UPS), telecommunication and IT systems, emergency and safety lighting systems, as well as power supply in power plants, substations and rail facilities. Wherever a power failure would have serious consequences, this battery offers the necessary safety.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This not only makes the battery absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and a very low self-discharge. The internal gas recombination protects against capacity loss and makes operation particularly safe and efficient, without the need to add water.Developed for longevity and reliabilityThe A400 series was developed for maximum economic efficiency over the entire lifetime. The extremely long service life of 12 years and more significantly reduces the need for costly and time-consuming battery changes in permanently installed systems. The high manufacturing quality and the use of high-purity materials ensure constant performance and contribute to the high operational safety of the entire system. Features  ModelSonnenschein A412/180 F10 ApplicationStandby / UPS / safety lighting TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)180 (C10) Design life> 12 years (Eurobat Long Life) Dimensions (L x W x H in mm)513 x 275 x 353 ConnectionF10 (M8 internal thread) Weight (kg)approx. 69.0  FAQs about the Sonnenschein A412/180 F10 lead-gel batteryWhat is the main advantage of Dryfit® gel technology?The key advantage is the combination of absolute maintenance-free operation, maximum cycle durability and extreme longevity. Compared to AGM batteries, gel batteries are often even more robust against deep discharges and offer very constant performance over long periods, making them the premium solution for critical standby applications.What does the "Eurobat Long Life" classification mean?Eurobat is the association of European battery manufacturers. The "Long Life" classification means that this battery is designed for an expected lifetime of 12 years or more under defined standby conditions (usually 20°C ambient temperature and correct maintenance charge).What is the difference between a standby battery and a starter or solar battery?A standby battery such as this is optimised for standby parallel operation. It is kept permanently at a constant voltage (maintenance charge) and only rarely must deliver energy. A starter battery is designed for short-term, high currents. A solar battery (cycle battery) is optimised for daily, deep discharge and recharging.How should this lead battery be disposed of?Lead batteries contain substances harmful to the environment and must not be disposed of in household waste. You can return your old battery free of charge to any dealer selling new batteries or to municipal recycling centres to ensure proper recycling.

Sonnenschein Lead-acid battery S12/6.6 S

The Sonnenschein SB6/330 A is a high-performance gel battery from the SOLAR BLOCK series. It was specially developed for medium-sized photovoltaic systems, holiday and weekend homes, smaller wind power plants and security power supplies. With 330 Ah (C100), it offers a reliable energy supply, long service life and a robust design, ideal for use under demanding conditions.Highlights at a glance6 V block battery with 330 Ah (C100, 1.80 V/Z, 20 °C)Up to 1200 charge cycles at 60% depth of discharge (C10, 20 °C)Maintenance-free thanks to VRLA gel technology (no topping up with water)Very low self-discharge – up to 2 years storage capability at 20 °CDeep discharge proof and robust for solar and energy storage applicationsFully recyclable, UL-certifiedPowerful for renewable energiesThe SB6/330 A is the ideal solution for medium-sized solar systems. Whether for holiday homes, off-grid applications or security power supply – it ensures a reliable and stable energy supply even with repeated charge and discharge cycles.Efficiency and safetyThanks to dryfit® gel technology, the battery is completely maintenance-free. The integrated gas recombination ensures extremely low gassing, making operation safe and environmentally friendly. Its low self-discharge allows for long storage without loss of performance.Robust design for a long service lifeThe SB6/330 A impresses with a service life of up to 1200 cycles at 60% depth of discharge. It is deep discharge-proof and reliable even under harsh environmental conditions – a sustainable solution for energy storage in renewable systems.Features  ModelSonnenschein SB6/330 A ApplicationSolar / cycle operation TechnologyLead gel (dryfit®) Nominal voltage (V)6 Capacity (Ah)330 (C100) Cycle stabilityapprox. 1200 cycles at 60% DOD Dimensions (L x W x H in mm)295 x 178 x 402 ConnectionStandard automotive pole (SAE) Weight (kg)approx. 47.0  FAQs about the Sonnenschein SB6/330 A gel batteryFor which applications is the SB6/330 A suitable?It is ideal for medium-sized photovoltaic off-grid systems, holiday and weekend homes, small solar or wind power plants, offshore buoys, yachts, measuring stations, emergency power supplies, parking meters and emergency call systems, even under adverse environmental conditions.What advantages does the dryfit® gel technology offer in terms of safety and maintenance?It enables maintenance-free operation, is leak-proof, very low-gassing, deep discharge-proof, durable, environmentally friendly and recyclable and, thanks to low self-discharge, offers a shelf life of up to 2 years at 20 °C. It is also transportable without restrictions (e.g. IATA A67) and UL-certified.What is the service life of the SB6/330 A battery?The SB6/330 A achieves up to 1200 charge cycles at 60% depth of discharge (C10, 20 °C).Can the SB6/330 A battery be deeply discharged?Yes, it is deep discharge-proof and particularly reliable for repeated charge and discharge cycles.What capacity and service life does the SB6/330 A gel battery offer?The battery has a capacity of 330 Ah (C100) and achieves an impressive service life of up to 1200 charge cycles at 60% discharge in accordance with C10 at 20 °C.

The Yuasa SWL780V is a compact VRLA high-performance battery with 12 volts and 28.8 Ah (C20). It is characterised by a 10-minute power rating of 815 W per block and offers a combination of high short-term performance and long service life. This battery is ideal for UPS systems, emergency and safety power supplies, data centres, telecommunications as well as industrial control systems.Highlights at a glanceHigh performance: 815 W per block at 10 minutes up to 9.6 V block voltage, alternatively 135.83 W per cell up to 1.6 V per cell at 20 °C.Powerful current output: up to 500 A for 1 second, 150 A for 1 minute.Long service life: EUROBAT High Performance 10 to 12 years, Yuasa service life up to 10 years at 20 °C.Flexible installation: Operation is possible in any orientation except permanently upside down.Low self-discharge: approximately 3 percent per month at 20 °C.Maximum performance for demanding applicationsThanks to low impedance and high short-term current capability, the SWL780V delivers reliable peak performance and keeps the output voltage stable. This makes it ideal for UPS systems with high power density, safety power supplies, communication nodes and buffer applications in critical infrastructures.Efficiency meets long service lifeStandby operation:The float charge voltage is 13.65 V ±1 % per block (2.275 V per cell) at a temperature of 20 °C.Temperature compensation is –3 mV per cell and degree Celsius.Current limitation is not required.Fast charge:The charge voltage is 14.50 V ±3 % per block (2.42 V per cell).Temperature compensation is –4 mV per cell and degree Celsius.The recommended current is 6.125 A.Technology for flexible applicationsThe wide temperature range enables versatile applications: discharge from minus 20 °C to plus 60 °C, charging from minus 15 °C to plus 50 °C, storage from minus 20 °C to plus 60 °C. The robust housing is made of ABS to UL94 HB. Each cell is equipped with a low-pressure valve for safe pressure regulation. VRLA batteries must not be operated in sealed housings, as hydrogen may be generated.Features  ModelYuasa SWL780V Battery typeVRLA AGM (high rate, maintenance free) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum power780 watt per cell (at 15 minutes) Charge voltage (Standby)13.5V to 13.8V Charge voltage (Cyclic)14.4V to 15.0V Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeDesign Life EUROBAT 10-12 years Dimensions (L/W/H, mm)210 x 175 x 175 Weight (kg)10.2 ConnectionM6 thread CertificationsIEC 60896-21+22, UL, VdS  FAQ about the Yuasa SWL780VWhat is the SWL780V designed for?The SWL780V is designed for use in UPS systems and applications requiring high short-term performance. This high-rate VRLA series is classified as "Long Life" (10 to 12 years) according to EUROBAT.What distinguishes SWL from NPL?The SWL series is an advancement of the NPL design and offers an improved energy-to-density ratio. It typically delivers up to 40 percent more high-current discharge capacity. Mechanical and electrical characteristics remain largely compatible.Which discharge data are relevant for high current use?The relevant discharge data for high current use are as follows:Typical constant power: 815 W per block for 10 minutes (up to 9.6 V).Maximum discharge current:500 A for 1 second150 A for 1 minuteInternal resistance: approx. 18 mΩ (according to EN IEC 60896-21)Impedance: approx. 8.5 mΩ (at 1 kHz)What is the expected service life?EUROBAT Long Life batteries have an expected service life of 10 to 12 years. Yuasa batteries have a design life of up to 10 years, each at 20 °C in standby operation.Is the SWL780V also suitable for cyclic applications?It can be used in cyclic operation, but it is primarily designed for standby and high-current discharge. For frequent charge and discharge cycles, cyclic series such as REC or NPC are the better choice.Is the SWL780V suitable as a replacement for standard 12 V-28 Ah blocks?Yes, often it is, provided the dimensions, M5 female thread terminals, charging parameters and required high-current performance match. Please always check the device data sheet and/or the manufacturer's approval.

The Sonnenschein GF 12 076 V is an absolutely maintenance-free lead-gel block battery that has been developed to meet the highest demands for cycle stability and reliability in demanding traction applications. As part of the globally proven GF-V series with Dryfit® gel technology, this battery offers exceptional service life and robustness. With a nominal voltage of 12V and a capacity of 76 Ah (C5), it is the ideal energy source for daily, tough use in cleaning machines, electric vehicles and lifting platforms.Highlights at a glanceSuperior Dryfit® gel technology: Absolutely maintenance-free throughout the entire service life, highest reliability and leak-proof.High cycle stability: Developed for demanding, daily charging and discharging cycles (approx. 700 cycles according to IEC 60254-1).High capacity: 76Ah (C5) for long working intervals and maximum productivity.Deep discharge protection: Offers excellent recovery even after deep discharges.Rugged construction: Reinforced, impact-resistant casing for tough industrial environments.Maximum performance for demanding traction applicationsThe Sonnenschein GF 12 076 V is the specialist for mobile, electrically driven machines and vehicles. Its main areas of application are industrial floor cleaning machines, electric lifting and work platforms, automated guided vehicles (AGVs), electric pallet trucks and golf carts. Wherever machines have to operate reliably and maintenance-free every day, this battery provides the necessary energy.Proven Dryfit® gel technologyThe Dryfit® gel technology invented and perfected by Sonnenschein binds the electrolyte in a thixotropic silica gel. This makes the battery not only absolutely leak-proof and maintenance-free, but also ensures excellent cycle stability and a very low self-discharge. Unlike conventional wet batteries, acid stratification is prevented, which significantly extends the service life in tough cycle operation.Developed for durability and economyThe GF-V series has been developed for maximum cost-effectiveness and minimum downtime in professional use. The high cycle life reduces the need for premature replacement and therefore lowers the total cost of ownership (TCO) of your fleet. The absolute maintenance-free operation eliminates the time and cost involved in regular water top-ups and ensures maximum work safety. Features  ModelSonnenschein GF 12 076 V ApplicationTraction / drive TechnologyLead-gel (dryfit®) Nominal voltage (V)12 Capacity (Ah)76 (C5) / 86 (C20) Cycle lifeapprox. 700 cycles (IEC 60254-1) Dimensions (L x W x H in mm)330 x 171 x 236 TerminalStandard automobile pole (SAE) Weight (kg)approx. 28.8  FAQs about the Sonnenschein GF 12 076 V lead-gel batteryWhat does "traction battery" mean?A traction battery (or drive battery) is specially designed to supply electric motors with energy over a longer period of time. It is extremely cycle-resistant, which means it can be regularly deeply discharged and recharged—as is the case in daily use with, for example, cleaning machines. This makes it different from a starter battery.What is the main advantage of Dryfit® gel technology in traction use?The key advantage is absolute maintenance-free operation. In a fleet of cleaning machines or lifting platforms, there is no need for time-consuming and error-prone checking and topping up of water. The batteries are also leak-proof and more robust against vibration, which increases operational safety in mobile use.What do the capacity specifications C5 and C20 mean?The capacity of a battery depends on how quickly it is discharged. The C-rate indicates the discharge current. C5 (discharged over 5 hours) is the standard for traction applications, as this is where high currents flow. C20 (discharged over 20 hours) is a common comparison value where the nominal capacity is higher.How should this lead battery be disposed of?Lead batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery to any dealer selling new batteries, or to municipal recycling centres, free of charge to ensure proper recycling.

The VISION RBC1 is a high-quality replacement battery kit that has been designed as a direct and reliable replacement for the original APC RBC1 battery unit. Consisting of a high-performance 12V valve-regulated VRLA battery, this kit provides a cost-effective and safe solution to restore the full performance of your APC UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Designed as a precisely fitting replacement for APC RBC1 to ensure quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Long service life: Designed for long operational periods in standby mode to protect your systems for years.Easy replacement: The kit is supplied ready to install, so you can carry out the replacement yourself quickly and easily.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC1 kit is designed to meet the demanding requirements of APC Back-UPS UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. Stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC1 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is safely contained in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust battery housing made of ABS plastic provides excellent protection against mechanical effects.Features  ModelVISION RBC1 replacement battery Battery typeVRLA AGM (UPS replacement battery) Nominal voltage (V)12 Capacity (Ah)4.5 (typical value) Maximum discharge current65A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 1.8 ConnectionFits APC UPS models Compatibility (excerpt)APC BK250, BK280, BK400, BK500  FAQs about the VISION RBC1 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC1 kit is designed as a replacement for the original APC RBC1 battery unit and is compatible, among others, with the following APC Back-UPS models: BK250EC, BK280B, BK400, BK400B, BK500, BK500M and BK500MC. Please check the exact label of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is generally very simple and can be carried out without technical knowledge. Most APC UPS systems have an easily accessible battery compartment. You just need to disconnect and remove the old battery unit and connect and insert the new VISION RBC1 kit.Do I need to set anything on the UPS after replacement?After installing the new battery, you should switch on the UPS and perform a self-test function, if your model offers this. It is also recommended to fully charge the battery in the UPS before first use. A special calibration is usually not necessary for these models.Is it safe to use a third-party replacement battery?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC1 kit uses only quality-tested batteries designed for UPS operation and guarantees the highest level of safety.What service life does the VISION RBC1 replacement battery have?The life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be affected by factors such as ambient temperature and frequency of power failures.What do I need to consider when disposing of the old battery?Lead-acid batteries are hazardous waste and must not be disposed of in your household waste. You can dispose of your old battery free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or at any retailer that sells starter batteries.

This NiMH battery is the modern successor to the classic nickel-cadmium batteries (NiCd) from HBC with the designations BA223000 and BA223030. These older batteries often had problems with the memory effect and offered lower capacities.The replacement battery offered here uses modern nickel-metal hydride technology. It fits perfectly mechanically in the compartment of your transmitter (identical design FuB 3A), but delivers more stable performance and is more environmentally friendly. With 6 volt and a capacity of usually 1,500 mAh to 2,100 mAh (depending on the cell chosen), it brings your crane control back up to the performance level of a new device.Highlights at a glanceTechnology upgrade (NiMH instead of NiCd): The biggest advantage: The memory effect is eliminated. You no longer have to fully discharge the battery before charging it. This significantly extends the service life in everyday construction site use.Longer runtime: While the old BA2230xx batteries often only had 700 mAh or 1400 mAh, modern replacement batteries offer 1,500 mAh to 2,100 mAh. This means significantly longer operating times without changing batteries.Full compatibility: Replaces 1:1 the old HBC numbers BA223000 and BA223030 as well as the designation FuB 3A (NiCd). It is mechanically identical to the newer type BA203060 (FuB 03A).Robust housing: The battery comes in a shock-resistant housing (usually HBC orange or black), which is specially designed for harsh use on construction sites.Compatible with chargers: Can be charged with existing HBC chargers (e.g. QE10860, QA10860 or IL series) as these usually support both technologies (NiCd/NiMH).Compatible transmitter series (extract)This 6V block is one of the most widely used batteries at HBC:Spectrum series: spectrum 1, spectrum 2, spectrum A, spectrum BMicron series: micron 5, micron 7Eco series: ecoLinus series: linus 6Technos series: technos 2 Features ModelReplacement battery for HBC Radiomatic (BA223030) Replaces original no.**BA223000** (NiCd), **BA223030** (NiMH), FuB 10AA, BA222060 Chemistry**NiMH** (nickel-metal hydride) – The modern upgrade Voltage**6.0 V** (5 cells) CapacityTypically **1,500 mAh to 2,100 mAh** (depending on the version) Compatible transmitters (extract)HBC spectrum 1, spectrum 2, spectrum 3, patrol D, vector DesignClassic HBC block (orange), 2 contacts on top Charging instructionsFully compatible with existing chargers (e.g. QA108600) Field of applicationConstruction cranes, concrete pumps, forestry radio, industrial cranes Weight (g)approx. 210 – 230  FAQs about the HBC BA223000 / BA223030What is the difference between BA22... and BA20...?This is the HBC code for cell chemistry:BA22xxxx: Old NiCd technology (contains toxic cadmium, memory effect).BA20xxxx: New NiMH technology (more environmentally friendly, more powerful). You can (and should) always replace a BA22 battery with a BA20 battery.My old battery was black, the new one is orange. Is that a problem?No. The colour of the housing varies depending on the production batch or manufacturer of the replacement battery. What matters is only the voltage (6V), the shape (FuB 3A), and the position of the contacts.Do I have to consider anything with NiMH?If you come from NiCd: NiMH batteries do not like deep discharge and extreme heat.Charge the battery when the LED on the transmitter flashes red (do not wait until it is "dead").Do not leave the battery in the blazing hot crane operator’s cab in summer. 

This NiMH battery is the specific replacement for the somewhat rarer, compact 6-volt batteries from HBC Radiomatic. It often bears the internal designation FuB 9AA (NiMH) or replaces the older FuB 9A (NiCd).It should not be confused with the widely used standard batteries (FuB 3A or FuB 05AA). The BA209060 is used especially in more compact handsets, which nevertheless require 6 volts voltage. With modern nickel-metal hydride technology, it offers reliable power without the memory effect of the old generation.Highlights at a glanceSpecialist for 6V handsets: This battery is precisely designed for HBC transmitters that use the compact format but require 6 volts (in contrast to the 3.6V systems).Full replacement: Replaces the HBC original numbers BA209000, BA209060 and BA209061 as well as the designation FuB 9AA.Modern NiMH upgrade: Also replaces older NiCd batteries (BA229000 / FuB 9A). The advantage: You can recharge the battery at any time, it lasts longer and is more environmentally friendly (cadmium-free).Solid capacity: Depending on the installed cells, this battery usually delivers between 730 mAh and 1,500 mAh. As it is often used in handsets without large displays, this is sufficient for very long operating times.Compatible with chargers: Works with the original HBC chargers (e.g. QE10860, QA10860), provided these are designed for 6V.Compatible transmitter series (extract)This battery fits certain versions of the following transmitters (please check voltage and design!):Micron series: micron 4, micron 5 (6V versions)Eco series: eco (6V versions)Linus series: linus 4Technos series: technos 1 (old versions)Others: patrol (handset variants) Characteristics ModelReplacement battery for HBC Radiomatic (Type FuB 9AA / FuB 9NM) Replaces original no.**BA209000**, **BA209060**, **BA209061**, **BA209062**, FuB 9NM Chemistry**NiMH** (nickel-metal hydride) Voltage**6.0 V** (5 small cells in a block) Capacity**700 mAh to 800 mAh** (standard for this size) Compatible transmitters (extract)**micron 4**, **micron 5**, **micron 6**, **micron 7**, eco, linus 4, linus 6 Form factorCompact, almost square block (approx. 57 x 56 mm) Contacts2 contacts on the top Dimensions (L x W x H in mm)approx. 57 x 56 x 17 (Attention: Much smaller than FuB 10AA!) Weight (g)approx. 90 - 120 (very light)  FAQs about the HBC BA209060 / FuB 9AAHow can I see the difference to the BA205030 (FuB 05AA)?This is visually difficult, as the housings are almost identical.BA205... (FuB 05AA): Has 3.6 volts.BA209... (FuB 9AA): Has 6.0 volts (this battery). You must check the rating label on your old battery ("6V"). If you insert a 6V battery in a 3.6V device, the electronics could burn out!My old battery was NiCd (BA229000). Is this NiMH compatible?Yes. HBC has switched from NiCd to NiMH batteries. The voltage (6V) has remained the same. Your charger should charge the new battery without any problems, and you benefit from a longer lifetime.Why does this battery sometimes have less mAh than the large blocks?This is due to the form factor. Large sub-C cells do not fit into the compact housing of the FuB 9AA. Smaller cells (AA or similar) are usually installed. As the devices in which it is installed (e.g. eco or linus) are very efficient, the battery still easily lasts a full working day.

This powerful NiMH battery is the suitable replacement for the "long" version of the Hetronic batteries, which are often used in the larger vendor's tray transmitters (Nova-L, Nova-XL). In your enquiry you mentioned "HTC" - this is certainly the manufacturer Hetronic meant.This battery replaces the original number 68303000 (as well as the older 68301000). In contrast to the "short" version (Mini), this battery utilises the full space in the battery compartment and offers with 2,000 mAh (2.0 Ah) enormous capacity for long work shifts in crane, concrete pump or forestry operations.Highlights at a glanceLong design (Nova L): This is the elongated bar (approx. 15 cm long). It is specially designed for transmitters that have the deep battery compartment. It provides more than twice as much energy as the small "Mini" battery.Replaces Hetronic 68303000: Fully compatible with the original numbers 68303000 (NiMH standard), 68301000 (NiCd old) and 68301020.High capacity (2.0 Ah): With 2,000 mAh, this is the high-performance version. This allows you to easily operate demanding radio systems with many functions over long periods without having to recharge.Modern NiMH technology: Easily replaces old NiCd batteries. The advantage: No memory effect, higher energy density, and more environmentally friendly.Robust design: The black plastic housing is shock-resistant and designed for tough construction site use. The contacts on the front ensure a secure connection in the transmitter.Compatible transmitter seriesThis battery fits into the large Hetronic systems:Nova-L: The standard "long" Nova.Nova-XL: The extra large version.GL / GR: Older large transmitter series.Not suitable for: Nova-S, Nova-M or Hetronic Mini (these require the short 750 mAh battery!). Features ModelReplacement battery for Hetronic Nova "Long" / Maxi Replaces original no.**68303000** (NiMH), **68301000** (NiCd), 68301010, KH68300990, Maxi Chemical**NiMH** (nickel-metal hydride) Voltage9.6 V Capacity**2000 mAh (2.0 Ah)** - High capacity version for long shifts Compatible transmitters (extract)Hetronic **Nova-L**, **Nova-XL**, GL, GR, Euro series (large compartments) DesignElongated block (black or yellow), end cap with contacts Dimensions (L x W x H in mm)**Approx. 152 x 49 x 14** (Attention: Much longer than the "Mini" version!) Contacts4 contacts on the front (end cap) Weight (g)approx. 220 - 250 (more cells = more weight)  FAQs about the Hetronic Nova Long (68303000)What is the difference between "Short" and "Long"?This is the most important difference with Hetronic batteries:Short (Mini): Approx. 6 cm long, 750 mAh (for Mini/Nova-S).Long (this battery): Approx. 15 cm long, 2000 mAh (for Nova-L/XL). Please check your old battery. This item here is the long bar.Can I use this battery instead of the old NiCd battery (68301000)?Yes. Hetronic and third-party manufacturers have almost completely switched to NiMH. The voltage (9.6V) is identical. Your transmitter benefits from almost double the runtime (2.0 Ah vs. previously often 1.2 Ah).Does it fit in the yellow Hetronic charger?Yes. The standard chargers from Hetronic (UCH series) are designed so that the battery either fits in completely or (depending on the charging tray) protrudes at the top, but makes secure contact. Since it is NiMH, the battery is charged correctly.

This NiMH battery is the reliable power source for the tried and tested radio remote controls from HIAB and Olsbergs. It is specially designed for the older, but widely used control systems HiDrive 4000 and CombiDrive 5000 designed.Often also known under the manufacturer's name Olsbergs, this battery replaces the original parts with the numbers 2055112, 9836713 or the type DA123. With 7.2 Volt and a capacity of mostly 1,500 mAh to 2,000 mAh (depending on the version), it brings your loader crane control back to full power – ideal as a replacement for ageing original batteries.Highlights at a glanceDouble identity (HIAB & Olsbergs): These controllers were often manufactured by Olsbergs for HIAB. The battery is therefore suitable for devices with HIAB-logo as well as those with Olsbergs-label.Full replacement: Fully replaces the original numbers 2055112, 9836713, 984.766.9 as well as the Olsbergs type designation DA123.Modern NiMH technology: Unlike old NiCd batteries, these cells do not suffer from the memory effect. You can recharge the battery flexibly without risking a loss in capacity.Robust housing: The battery is installed in an impact-resistant, black plastic housing, which is specially designed for the tough use on trucks and construction sites.Charging compatibility: Fits mechanically and electrically into the original charging stations of the HiDrive/CombiDrive systems.Compatible systemsThis battery is the heart of the following remote controls:HIAB: HiDrive 4000, CombiDrive 5000Olsbergs: Controller DA123, various OEM systems for loader cranes and forestry machines.Loglift / Jonsered: (If the Olsbergs control system is installed). Characteristics ModelReplacement battery for HIAB / Olsbergs (7.2V) Replaces original no.**2055112**, **804572**, **984.766.9**, D6000, DA143 Chemistry**NiMH** (nickel-metal hydride) Voltage**7.2 V** (6 cells) CapacityTypically **1500 mAh to 2000 mAh** (Stable upgrade) Compatible systemsHIAB **HiDrive 4000**, **CombiDrive 5000**, Olsbergs control DesignBlack, elongated block with lateral guide rails Dimensions (L x W x H in mm)approx. 120 x 55 x 23 Contacting4 recessed contacts on the front side Weight (g)approx. 200 - 220  FAQs about the HIAB / Olsbergs batteryMy battery only says "Olsbergs". Will this HIAB battery fit?Yes. HIAB uses the electronics of the Swedish hydraulics specialist Olsbergs for these systems. The batteries are technically identical, whether the HIAB logo or the Olsbergs brand name is on them. What matters is the design and the voltage of 7.2V.Does the battery also fit the newer HIAB XS Drive?No, mostly not. The XS Drive (often with 7.4V Li-Ion or other NiMH design) usually has a different battery compartment. The HiDrive 4000 batteries are rather flat and wide. Please compare the part number: If you are looking for 2055112, this is the right one.My original battery had less capacity. Is that a problem?No, that's an advantage. Old original batteries often only had 1,200 mAh. A new 2,000 mAh battery, at the same size, has more “endurance”. It lasts longer before you need to change it. The charger just takes a bit longer to fully charge it.

This high-quality NiMH battery is the right power source for the widely used Hiab XS Drive Radio remote controls (often also used with Moffett or Multilift). It replaces the original battery with the part number 378.6692 (often written as 378 6692) and the reference number 16262.Although you wrote "XD Drive" in your enquiry, the part numbers clearly refer to the XS Drive System to. With 2,000 mAh (2.0 Ah), this battery offers a significant increase in performance compared to the older standard batteries (often 1.2 Ah or 1.5 Ah), which means longer charging cycles and fewer interruptions in crane operation.Highlights at a glancePerfect fit for XS Drive: Specially developed for the Hiab XS Drive Transmitter. The battery has the specific housing shape with the side guide rails and the contact block on the front.Replaces Hiab 378.6692: Fully compatible with the original part numbers 378.6692, 378 6692 and the number 16262. Also often replaces batteries from Cargotec or Moffettthat use this control system.High capacity (2.0 Ah): With 2,000 mAh utilise the maximum useful capacity for this design. Your transmitter will last significantly longer than with a used original battery.Reliable NiMH technology: No memory effect. The battery is more robust against deep discharge than Li-Ion variants and can be safely charged with standard NiMH chargers.Gold-plated contacts: High-quality contacts ensure loss-free power transmission and prevent corrosion, which is particularly important in damp weather on the loading crane.Compatible systemsThis battery fits the following control units (please compare part number and appearance):HIAB: XS Drive, XS Drive LiteMoffett: Truck-mounted forklift controls (XS Drive base)Multilift: Roll-off tipper controls (XS Drive base)Squid: Various terminal tractors (if XS Drive is installed) Characteristics ModelReplacement battery for HIAB XS Drive Replaces original no.**378.6692**, **379.6692**, 16262, AX-HI6692, AMH0627 Chemical**NiMH** (nickel-metal hydride) Voltage**7.2 V** (6 cells) Battery capacityTypically **2000 mAh** (standard) to **2300 mAh** (high power) Compatible transmittersHIAB **XS Drive** (modern series) DesignFlat, wide block (approx. 120 x 50 mm) Dimensions (L x W x H in mm)approx. 120 x 50 x 22 (significantly flatter than the CombiDrive battery!) Charging informationRequires special XS-Drive charger (battery is inserted flat) Weight (g)approx. 200 - 210 FAQs about the Hiab XS Drive battery (3786692)Can I use this NiMH battery if my old one was Li-Ion?Caution advised.Li-Ion batteries are also available for the XS Drive (often grey/black with a different number). These require a Li-Ion charger. If your charger and your old battery are NiMH (nickel-metal hydride), this article is perfect. If you have a pure Li-Ion charger, this battery will not fit electrically or will not charge. Check the charger's rating plate!What does the number 16262 mean?This is a common reference number.The number 16262 is often used by replica manufacturers or in cross-reference lists to identify this specific battery type (7.2V Hiab XS). Technically, it corresponds to Hiab number 378.6692.How long does the 2000 mAh battery last?Depending on use.The XS Drive transmitter is relatively economical. With 2,000 mAh, normal crane operation is often several working days possible without recharging. In continuous operation (e.g. 8 hours of uninterrupted transmission), it easily lasts for one to two shifts.

.The PAL590.1500 crane battery is a robust NiMH replacement battery for Palfinger/Scanreco transmitters from the 590, 592 and 960 series and provides a long-lasting power supply for reliable radio control in everyday work. .

This high-quality NiMH battery is the proven power source for the widely used Scanreco radio remote controls, which are especially used with Palfinger, Fassi, HMF and Effer loader cranes.It replaces the classic original batteries with designations 590 and 592 as well as the part numbers 13445, 16131 and 17162. With 7.2 volts and a capacity of mostly 1,500 mAh to 2,000 mAh (depending on cell equipment) this battery restores your remote control to full performance and often replaces old, weak NiCd batteries.Highlights at a glanceThe standard for loader cranes: This battery (often called "Scanreco block") is one of the most frequently used batteries worldwide. It fits into transmitters of the RC400, RC590 and RC960 series.Powerful upgrade (2.0 Ah): While old original batteries often only delivered 1,200 mAh, modern replicas offer 2,000 mAh. This means for you: Longer crane operating times and fewer interruptions for changing batteries.Full compatibility: Replaces the original numbers 590, 592, 13445, 16131, 17162, 1026 and also EA2512 and RSC7220.Modern NiMH technology: No more memory effect. The battery is more robust and environmentally friendly than old NiCd models. It provides a constant voltage until the end.Robust construction: Made from impact-resistant plastic (black) to withstand tough conditions on the lorry or construction site.Compatible systems (excerpt)This battery is manufactured by Scanreco, but sold under many crane brand names. It fits in:Palfinger: Scanreco RC400, RC590, RC960, EEA2512Fassi: (Scanreco systems)HMF: (Scanreco systems)Effer: (Scanreco systems)Marrel: (Scanreco systems)Crane radio: Suitable for all systems using battery type 590/592. Features ModelReplacement battery for Scanreco / Palfinger ("The Bone") Replaces original number**590**, **592**, **960**, 16131, EEA2512, 593, RSC7220 Chemistry**NiMH** (Nickel-Metal Hydride) Voltage**7.2 V** (6 cells in rod) Capacity**2000 mAh** to **3000 mAh** (Depending on version, standard is 2000 mAh) Application areaTruck loader cranes (**Palfinger**, **Fassi**, **Effer**, **HMF**, **Kranlim**) SystemsScanreco RC400, RC590, RC960, Y-HET, Maxi Form factorElongated rod with thickened ends ("dog bone") Dimensions (L x W x H in mm)approx. 150 x 50 x 28 Charging noteCompatible with the standard Scanreco charger (Type 434 / 435 / 439) Weight (g)approx. 340 - 380  FAQs on the Palfinger / Scanreco 590 batteryMy old battery has 3 contacts, this one only 2. Will it fit?Usually, yes. Scanreco batteries generally have 2 main contacts (+ and -) on the face. Some older versions or special designs had a third contact for temperature monitoring. The modern NiMH replacement batteries work flawlessly in the standard chargers (Type 434 / 435) and transmitters even with 2 contacts, as the charging cut-off is via delta peak (voltage).Can I continue to use my Palfinger charger?Yes. The standard charger in the lorry or the mains charger (often known as 434, 435 or 439) charges this battery without issues. As the new battery has more capacity (2.0 Ah), charging takes a little longer than before, but it also lasts longer.What is the difference between type 590 and 592?Historically, there were differences in cell chemistry (NiCd vs NiMH) or capacity. Today, this form factor (Scanreco block) is the universal replacement for both numbers. This battery replaces both types.

This NiMH high-performance battery is the specialised power source for the radio remote controls of Schwing concrete pumps. It is precisely matched to the AK2 system (often produced by Teletec) and replaces the original batteries with part numbers 10191556 and 491001057.With 7.2 Volt and a capacity of 2,000 mAh (or higher, depending on the version), this battery offers reliable endurance for tough construction site use. It is the ideal solution if your old battery no longer holds a charge or you need a second battery for uninterrupted operation of the concrete pump.Highlights at a glanceSpecialist for concrete pumps: Specially developed for the Schwing radio remote controls of the AK2 series and compatible Teletec transmitters.Full replacement for 10191556: Identically replaces the original Schwing numbers 10191556, 491001057 as well as the Teletec number RTE7220.Powerful upgrade (2.0 Ah): With 2,000 mAh, this battery often offers more capacity than the original standard batteries. This means longer pumping times without battery replacement.Modern NiMH technology: Uses robust nickel-metal hydride cells with no memory effect. You can recharge the battery at any time, which is a great advantage in hectic construction site use.Precisely fitting housing: The battery (mostly black) features the specific design with the correct contacts to securely lock into the slot of the transmitter.Compatible modelsThis battery fits the following control systems:Schwing: Concrete pump AK2, transmitter AK2Teletec: AK2 Transmitter, FW24, FW43Other: Devices that use the battery type CS-TAK200BL or RTE7220 use. Characteristics ModelReplacement battery for Schwing / Teletec (AK2) Replaces original no.**10191556**, **30423555**, 10071306, 31000070 Chemistry**NiMH** (nickel-metal hydride) Voltage**7.2 V** Capacity**2000 mAh (2.0 Ah)** - Solid performance for everyday construction site use Suitable forSchwing Stetter concrete pumps, Teletec radio remote controls DesignRectangular block (grey or black) with guide rails Dimensions (L x W x H in mm)approx. 108 x 50 x 26 Charging informationCompatible with original Schwing/Teletec chargers Weight (g)approx. 210 - 230  FAQs on Schwing AK2 batteryMy old battery has a different colour. Will this black battery fit?Yes, in most cases.The original batteries sometimes vary in colour or branding (Schwing vs. Teletec). The decisive factors are the design and the part number (e.g. 10191556). If your old battery looks mechanically identical and has 7.2V, this replacement battery will fit.Do I need a special charger?No.The battery is designed to be charged with the original Schwing or Teletec charging stations. The charging electronics detect the NiMH battery and charge it reliably.Is this battery also available with Li-Ion technology?Caution.There are conversions or newer versions, but the standard AK2 systems are designed for NiMH (formerly NiCd). A Li-Ion battery necessarily requires a different charger. Stick to NiMH if your charger and transmitter are designed for it, to avoid damage.

This is the high-end version of the classic HBC supply block. With 2,100 mAh (2.1 Ah) this NiMH battery offers the technically maximum possible capacity for this design. It is the direct upgrade to the standard battery (FuB 10AA with 1500–2000 mAh) and is particularly suitable for users who work in multi-shift operation or whose radio remote controls (e.g. Spectrum series) have a high power consumption due to many additional functions (displays, feedback).It reliably replaces all variants of the type FuB 10, FuB 78 as well as the original BA21 numbers. The specification "2x6V" refers to the special contact configuration (4 contacts), the operating voltage is 6 volt.Highlights at a glanceMaximum endurance (2.1 Ah): With 2,100 mAh you get the longest possible runtime for this battery type. This means fewer charging cycles and more security for long operations on the construction site or in the forestry sector.Complete replacement: Replaces the HBC original numbers BA214060, BA214061, BA213020, BA211060 and BA210040. Compatible with the designations FuB 10AA, FuB 10XL, FuB 78AA as well as PM458017 and PM471560.Modern NiMH technology: No memory effect. You can recharge the battery at any time without fear of loss of capacity. It is also more robust to cold than old NiCd batteries.4-contact system: The battery has the characteristic 4 contacts on the base, which provide intelligent charging detection and redundant power supply in HBC large transmitters.Precision-fit housing: The battery block (usually black or HBC orange) is mechanically precisely matched to the shafts of the Spectrum and Patrol transmitters.Compatible transmitter series (excerpt)This "large" battery is the standard for HBC's tray transmitters:Spectrum series: Spectrum 1, Spectrum 2, Spectrum 3Patrol series: Patrol DVector series: Vector ProSpecial applications: Forestry radios, concrete pumps, cranes using the large BA21 tray. Characteristics ModelSpare battery for HBC Radiomatic (type FuB 10XL) Replaces original no.**FuB 10XL**, **FuB 10AA**, BA214060, BA214061, BA213020 Chemistry**NiMH** (Nickel-metal hydride) - High Energy Cells Voltage**6.0 V** Capacity**2100 mAh (2.1 Ah)** - The maximum for this housing Compatible transmitters (excerpt)spectrum 1, spectrum 2, spectrum 3, patrol D, technos, vector pro ConstructionOrange block (shockproof, vibration-protected) XL advantageApprox. **40% longer runtime** than old NiCd or standard NiMH batteries Charging noteCompatible with all NiMH-compatible HBC chargers (charging time is slightly increased) Weight (g)approx. 230 - 250 (densely packed energy cells)  FAQs for the HBC FuB 10XL (2.1 Ah)What are the benefits of switching from 1.5 Ah to 2.1 Ah?Approx. 40% longer runtime. If your old battery was empty after 8 hours, this one will last over 11 hours in theory. This is often the crucial difference to finish a long shift without changing.What does "2x6V" mean exactly?The battery internally has two strings or a special contact configuration with 4 poles to support the HBC safety features. Technically, it provides 6 volt to the transmitter. Do not be confused by the designation – as long as your old battery has 4 contacts and bears the BA21... number, this one will fit perfectly.Does charging take longer?Yes, slightly. As there is more energy "in the tank" (2100 mAh), the charger takes a little longer to fill it completely (compared with a 1500 mAh battery). The original HBC chargers, however, regulate this automatically and switch off as soon as the battery is full.

The Sonnenschein GF 06 240 V is a robust and maintenance-free gel battery from the GF-V series. It has been specially developed for tough industrial use and provides reliable power for automated guided vehicles (AGVs), lifting platforms, cleaning machines, electric vehicles, pallet trucks and many other applications.Highlights at a glance6 V block battery with 240 Ah (C5) and 270 Ah (C20)Up to 700 charging cycles according to IEC 60254-1Maintenance-free thanks to VRLA gel technologyVery low self-discharge and therefore long shelf lifeDeep-discharge safe, robust and reliable in operation100% recyclable, environmentally friendly designPowerful for industrial applicationsThe GF 06 240 V gel battery is ideally suited for use in intralogistics and material flow. It guarantees a continuous energy supply, even under demanding cyclical loads, thus ensuring the reliable performance of AGVs, cleaning machines or electric pallet trucks.Efficiency through gel technologyThanks to dryfit® gel technology, there is no need to refill with water. The battery is sealed and works with very low gas formation. Its low self-discharge makes it ready for use for months and significantly reduces maintenance requirements.Robust construction for long service lifeWith up to 700 cycles, the GF 06 240 V offers a long service life. It is deep-discharge safe and resistant to harsh conditions in daily industrial operation. This makes it an economical solution for demanding applications. Features  ModelSonnenschein GF 06 240 V ApplicationTraction / drive TechnologyLead gel (dryfit®) Rated voltage (V)6 Capacity (Ah)240 (C5) / 270 (C20) Cycle stabilityapprox. 700 cycles (IEC 896-2) Dimensions (L x W x H in mm)328 x 181 x 368 ConnectionStandard Autopol (SAE) Weight (kg)approx. 46.5  FAQs on the Sonnenschein GF 06 240 V VRLA gel batteryCan the battery be deeply discharged?Yes, the GF 06 240 V is deep-discharge safe and particularly reliable for repeated cyclical use.Is the battery subject to transport restrictions?No, operational VRLA batteries such as the GF 06 240 V are exempt from transport restrictions according to IATA A67.How big and how heavy is the battery, and which connection is used?The battery measures 311 × 183 × 358 mm and weighs approximately 47 kg. It uses an A terminal (round pole) for the connection.For which applications is the GF 06 240 V particularly suitable?It is ideal for demanding industrial applications such as cleaning machines, automated guided vehicles, lifting platforms, electric vehicles, as well as for leisure vehicles like motorhomes, boats, golf caddies, e-scooters or wheelchairs. What capacity and service life does the battery offer?It has a capacity of 240 Ah (C5) or 270 Ah (C20) and endures up to 700 charging cycles at 75% discharge according to IEC 254-1.

The VISION RBC55 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC55 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC55, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Durable: Designed for long service life in standby operation, to protect your systems over many years.Simple replacement: The kit is supplied as a complete set of four batteries, so you can quickly and easily perform the replacement yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC55 kit is designed to meet the demanding requirements of APC Smart UPS systems of the 2200VA and 3000VA class. The built-in batteries are high-current capable and can immediately provide the required power in the event of a power failure, so that your connected servers, network storage and other critical devices can be safely shut down or continue to operate. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC55 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is safely bound in a fibreglass mat. This makes the batteries completely leak-proof and allows operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust housing of the batteries made of ABS plastic provides excellent protection against mechanical impact.Features  ModelVISION RBC55 Replacement Battery Battery typeVRLA AGM (UPS replacement battery kit) Contents4 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 48 (system) Capacity (Ah)17 (system capacity) Charging voltage (maintenance charge)54.0V - 55.2V (system) Charging voltage (cyclic operation)57.6V - 60.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 24.0 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC SUA2200I, SUA3000I, SUA3000RMI2U  FAQs about the VISION RBC55 Replacement BatteryWhich UPS models is this kit suitable for?The VISION RBC55 kit is designed as a replacement for the original APC RBC55 battery unit and is compatible, among others, with the following APC Smart UPS models: SUA2200I, SUA2200RMI2U, SUA3000I and SUA3000RMI2U. Please check the exact designation of your UPS system before purchasing.Is battery replacement complicated?No, replacement is usually very simple and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. All you need to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC55 kit. Make sure that the wiring of the four batteries is correct.Do I have to set anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and run a self-test function. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure the exact remaining runtime indicator.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries, which often meet or even exceed the specifications of the original batteries. Our RBC55 kit uses only quality-tested batteries, designed for use in UPS systems and ensuring the highest level of safety.What is the service life of the VISION RBC55 Replacement Battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20°C. The actual service life may be influenced by factors such as ambient temperature and frequency of power failures.What should I pay attention to when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or any retailer that sells starter batteries.

The VISION RBC47 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC47 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit provides a cost-effective and safe solution to restore full performance to your APC Smart UPS or Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC47, ensures easy and fast installation.High Reliability: Uses high-quality AGM batteries, optimised for demanding UPS operation.Maintenance Free: The leak-proof AGM technology makes any maintenance of the batteries superfluous.Long Service Life: Designed for long use in standby mode to protect your systems for years.Easy Replacement: The kit is delivered as a complete set of two batteries, so you can replace it quickly and easily by yourself.Economical Solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC47 kit is designed to meet the demanding requirements of various APC UPS systems. The installed batteries are high-current capable and can provide the necessary power immediately in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC47 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust housing of the batteries, made of ABS plastic, provides excellent protection against mechanical influences.Characteristics  ModelVISION RBC47 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (Typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC DLA750I, SMT750I, SMT750RMI2U  FAQs about the VISION RBC47 replacement batteryFor which UPS models is this kit suitable?The VISION RBC47 kit is designed as a replacement for the original APC RBC47 battery unit and is among others compatible with the following APC Smart UPS models: DLA750I, SMT750I, SMT750IC, SMT750RMI2U. Please check the exact designation of your UPS unit before purchase.Is it complicated to replace the battery?No, replacement is generally very simple and can be performed without technical expertise. Most APC UPS units have an easily accessible battery compartment. You only have to disconnect the old battery unit, remove it and connect and insert the new VISION RBC47 kit. Pay attention to the correct wiring of both batteries.Do I have to adjust anything on the UPS after replacement?After fitting the new battery, you should switch on the UPS and perform a self-test function. It is recommended to record the replacement date of the battery via the software (PowerChute) or the display. Runtime calibration may be useful to ensure the precise remaining runtime display.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC47 kit uses only quality-tested batteries that are designed for use in UPS units and provide maximum safety.What is the service life of the VISION RBC47 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS unit at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What should I consider when disposing of the old battery set?Lead-acid batteries are special waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres, or with any retailer who sells starter batteries.

The YUASA SWL1100FR offers strong power density, compact dimensions and high reliability for industrial applications. It is the ideal lead battery for systems that require a secure energy supply with a space-saving design.Highlights at a glanceLong service life: EUROBAT "Long Life" for up to 12 years of use.High power output: Delivers 1202 watts with 10-minute discharge up to 9.6 V.Compact design: Space-saving with high energy density.Maintenance-free: VRLA technology for safe and leak-proof operation.Powerful performance for industrial applicationsThe YUASA SWL1100FR is part of the proven SWL series of valve-regulated lead-acid batteries (VRLA). It delivers 1202 watts with a 10-minute constant power discharge up to 9.6 V and is ideal for UPS systems, security lighting, telecommunication systems and many other industrial applications. Its maximum discharge current of 500 A for one second ensures that short-term load peaks can be handled without any problem.Efficient energy and long service lifeThe SWL1100FR offers an expected service life of up to 10 years and meets the EUROBAT classification "Long Life" (10 to 12 years). Its low self-discharge of around 3% per month ensures reliable operational readiness even after longer periods of downtime. The flame-retardant ABS housing (UL94:V0) reliably protects the battery against mechanical influences and provides additional safety during operation.Robust technology for versatile applicationsThe SWL1100FR can be flexibly installed in almost any mounting position except for a permanently overhead mounted position. The M5 female thread or bolt connections allow simple and safe installation. The recommended charging current for cyclic operation is a maximum of 9.9 A, while no limitation is required for float charging. Low-pressure relief valves reliably regulate the gas pressure within the cells, ensuring low-maintenance operation. The SWL1100FR meets international standards and certifications, including ISO 9001, ISO 14001, OHSAS 18001 as well as IEC61056 and IEC60896-21/22 standards.  ModelYuasa SWL1100FR Battery typeVRLA AGM Nominal voltage (V)12 Capacity (Ah)41 (at 20h rate) Maximum discharge current680A (short circuit current) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.5V (±3%) Operating temperature (°C)Charging: -15 ~ 50 / Discharging: -20 ~ 60 Storage temperature (°C)-20 ~ 50 Service lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)197 x 166 x 174 Weight (kg)15.5 ConnectionM6 thread CertificationsISO9001, ISO14001, OHSAS18001, IEC 60896-21+22, UL  FAQs about the Yuasa SWL1100FR lead-acid batteryWhat is the service life of the SWL1100FR?The SWL1100FR belongs to the EUROBAT "Long Life" class and offers an expected service life of up to 12 years at 20 °C.What is the capacity and voltage of the battery?The SWL1100FR offers a nominal voltage of 12 V and a capacity of 40.6 Ah (C20).What safety features does the SWL1100FR offer?The battery features a flame-retardant ABS housing, low-pressure relief valves for gas pressure regulation as well as maintenance-free VRLA technology.How high is the self-discharge?The self-discharge rate is approx. 3% per month at 20 °C, so the battery remains ready for use even after longer periods of standstill.What connections does the battery have?The SWL1100FR comes with M5 female thread or bolt connections that allow for easy and secure installation.

The YUASA SWL750FR impresses with its compact design, high power density and absolute reliability in safety-critical applications. As a VRLA lead-acid battery with a flame-retardant housing (UL94:V0), it is specially designed for demanding industrial uses such as UPS systems, safety technology and emergency power supplies.Highlights at a glanceHigh power output: Up to 767 watts with 10-minute discharge up to 9.6 VLong-term operation: EUROBAT class “Long Life” with up to 12 years service lifeFast discharge possible: 500 A discharge current for 1 secondReliable technology: VRLA technology with integrated safety valvesFire protection included: Flame-retardant ABS housing according to UL94:V0Compact, powerful and maintenance-freeWith a capacity of 25 Ah (20h rate), the SWL750FR delivers up to 767 W at a 10-minute constant discharge, perfect for applications with a high short-term power requirement. The maintenance-free VRLA technology allows safe and gas-tight operation for many years. Thanks to its robust construction and low weight of only 9.8 kg, the battery can be easily integrated into compact systems.Efficient energy supply with long service lifeThe battery belongs to the EUROBAT “Long Life” category with an operating life of 10 to 12 years at 20 °C ambient temperature. Self-discharge is only about 3% per month, ensuring operational readiness even after long storage periods. With a maximum discharge capacity of 500 A (1 second) and 150 A (1 minute), the SWL750FR is ideally suited for peak loads in safety-critical applications.Flexible installation and certified safetyThe battery can be installed in any position except for permanent overhead mounting. Connection is via M5 female thread or bolt connections. The flame-retardant housing material (UL94:V0) as well as the integrated low-pressure valve, which enables safe overpressure compensation in case of gas formation, provide additional safety. The SWL750FR is certified according to ISO 9001, ISO 14001, EN 18001 and by UL.  ModelYuasa SWL750FR Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)25 (at 20h rate) Maximum discharge current280A (for 5 seconds) Charging voltage (standby charging)13.65V (±1%) Charging voltage (cycle operation)14.7V (±3%) Operating temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Storage temperature (°C)-20 ~ 50 Service lifeUp to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)175 x 166 x 125 Weight (kg)9.2 ConnectionM6 thread CertificationsIEC 60896-21+22, VdS, UL94 V-0  FAQs about the Yuasa SWL750FR lead-acid batteryHow long is the service life of the SWL750FR?The battery corresponds to the EUROBAT “Long Life” class and achieves a service life of up to 12 years at 20 °C.What applications is the SWL750FR suitable for?Ideal for high-current applications such as UPS systems, emergency lighting, telecommunications systems and emergency power supply due to powerful 10-minute output pulse.Is the battery flexibly installable?Yes, the battery can be operated in any position except permanently upside down.What safety functions are included?A flame-retardant housing (UL94:V0), an integrated gas pressure valve and the VRLA technology ensure safe and maintenance-free operation.What is the maximum discharge current?The battery delivers up to 500 A for 1 second and 150 A for 1 minute, making it ideal for applications with short-term power requirements.How high is the self-discharge?Self-discharge is about 3% per month at 20 °C, ideal for systems with seasonal use or extended standby operation.

The Duracell DR9967 is a high-quality lithium-ion replacement battery specifically developed as a replacement for the widely used Sony NP-FW50 battery. As a quality product from the globally renowned brand Duracell, this battery offers reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a rated voltage of 7.4 V and a capacity of 1020 mAh, making it the ideal choice to extend the life of your trusted Sony Alpha or NEX cameras.Highlights at a GlanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Sony NP-FW50 battery.Modern Li-Ion technology: High capacity of 1020 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge, and short circuit.Reliable performance: 7.4 V voltage for constant and powerful output.Long-lasting Power for Your Sony CameraThe Duracell DR9967 is the perfect power solution for a wide range of popular Sony Alpha system cameras (e.g. Alpha 6000, 6300, 6400, Alpha 7 series) as well as for many NEX and Cybershot models. It ensures that you have the necessary stamina during longer photo shoots or video recordings. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last picture.Reliable Lithium-Ion TechnologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables high capacity in a compact and light design that corresponds exactly to the dimensions of the original.Tested Quality and SafetyDuracell batteries are subject to strict quality controls to guarantee consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging processes and reliably protect the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the tested safety of a global premium brand. Features ModelDuracell Camcorder Replacement Battery DR9967 ApplicationCamera battery CompatibilityReplacement for Sony NP-FW50 TechnologyLithium-ion (Li-Ion) Rated voltage (V)7.4 Capacity (mAh)1020 Energy (Wh)7.5 Dimensions (L x W x H in mm)approx. 45 x 32 x 19 Weight (g)approx. 45  FAQs about the Duracell DR9967 Replacement BatteryIs this battery compatible with my original Sony charger?Yes, this replacement battery is designed to work seamlessly with original Sony chargers (e.g. the BC-TRW) for the NP-FW50 battery. You can continue to use your existing charger without any issues.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries such as this do not have this issue. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Sony cameras that use the NP-FW50. These include many models from the Alpha series (e.g., A6000, A6100, A6300, A6400, A6500, A7, A7 II, A7R, A7R II, A7S, A7S II), the NEX series, and the Cybershot DSC-RX10 series. Please consult your camera's manual to confirm compatibility.How should this battery be disposed of?Batteries must not be disposed of with household waste. As used device batteries, you can return them free of charge to collection points in stores or at municipal recycling centres (e.g., via GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Duracell DR9925 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the Canon LP-E5 battery. As a quality product from the world-renowned brand Duracell, this battery provides reliable, long-lasting power and top safety for your camera equipment. It delivers a rated voltage of 7.4 V and a capacity of 1020 mAh, making it the ideal choice to extend the life of your tried-and-tested Canon EOS cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Canon LP-E5 battery.Modern Li-Ion technology: High capacity of 1020 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.4 V voltage for a constant and powerful output.Long-lasting power for your Canon cameraThe Duracell DR9925 is the perfect energy solution for a variety of popular Canon EOS SLR cameras. It ensures that you have the necessary stamina even for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right through to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers crucial advantages over older battery types. It does not suffer from the memory effect, meaning you can recharge the battery at any time without having to worry about loss of capacity. The high energy density enables strong capacity in a compact and lightweight design that exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries undergo strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust in the tested safety of a global premium brand. Features ModelDuracell Camcorder replacement battery DR9925 ApplicationCamera battery CompatibilityReplacement for Canon LP-E5 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7.4 Capacity (mAh)1020 Energy (Wh)7.5 Dimensions (L x W x H in mm)approx. 53 x 36 x 15 Weight (g)approx. 50  FAQs about the Duracell DR9925 replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Canon chargers (e.g. the LC-E5) for the LP-E5 battery. You can simply continue to use your existing charging station.What does “no memory effect” mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries like this one do not have this problem. You can recharge the battery at any charge level without affecting its lifespan.Which camera models is this battery suitable for?This battery is compatible with a wide range of Canon EOS cameras that use the LP-E5. These include the EOS 1000D, 500D and 450D models as well as the Rebel XS, XSi and T1i. Please check compatibility in your camera's manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in shops or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally-friendly recycling.

The Duracell DRC2L is a high-quality lithium-ion replacement battery that has been specifically developed as a replacement for Canon battery models NB-2L, NB-2LH, and BP-2L5. As a quality product from the world-renowned brand Duracell, this battery offers reliable, long-lasting power and maximum safety for your camera equipment. It provides a nominal voltage of 3.7 V and a capacity of 700 mAh and is the ideal choice for extending the lifespan of your trusted Canon cameras and camcorders.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Canon NB-2L or NB-2LH battery.Modern Li-Ion technology: High capacity of 700 mAh without memory effect.High safety: Integrated protective electronics against overcharging, deep discharge, and short circuit.Reliable performance: 3.7 V voltage for constant and powerful output.Long-lasting energy for your Canon cameraThe Duracell DRC2L is the perfect energy solution for a variety of popular Canon camcorders (e.g. MV series, HV series) and EOS SLR cameras (e.g. EOS 350D, 400D). It ensures that you have the necessary stamina even during extended photo shoots or video recordings. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of batteries. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a high capacity in a compact and lightweight design that matches the original dimensions exactly.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. An integrated protective circuit monitors the charging and discharging process and reliably protects the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the tested safety of a global premium brand. Specifications ModelDuracell Camcorder replacement battery DRC2L ApplicationCamcorder / camera battery CompatibilityReplacement for Canon NB-2L TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)700 Energy (Wh)2.6 Dimensions (L x W x H in mm)approx. 45 x 33 x 16 Weight (g)approx. 40  FAQs about the Duracell DRC2L replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can easily be charged with the original Canon chargers (e.g. the CB-2LWE) for the NB-2L battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries like this one do not have this problem. You can recharge the battery at any charge level without affecting its lifespan.Which camera models is this battery suitable for?This battery is compatible with a variety of Canon cameras and camcorders that use the NB-2L or NB-2LH. These include, but are not limited to, the Canon EOS 350D (Rebel XT) and EOS 400D (Rebel XTi) and many camcorders from the MV, MVX, HV, and DC series. Please check the compatibility in your camera’s user manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Duracell DRC4L is a high-quality lithium-ion replacement battery, specially developed as a replacement for the compact Canon NB-4L battery. As a quality product from the world-renowned brand Duracell, this battery offers reliable, long-lasting power supply and the highest level of safety for your camera equipment. It delivers a nominal voltage of 3.7 V and a capacity of 720 mAh and is the ideal choice to extend the life of your trusted Canon IXUS or PowerShot cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precise replacement: 100% compatible with cameras that use the Canon NB-4L battery.Modern Li-Ion technology: High capacity of 720 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely slim and lightweight format.Long-lasting power for your Canon cameraThe Duracell DRC4L is the perfect power solution for a variety of popular and ultra-compact Canon digital cameras, especially from the IXUS and PowerShot SD series. It ensures that you have the necessary staying power even for long photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers crucial advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without worrying about capacity loss. The high energy density enables strong capacity in an extremely compact and slim format, precisely matching the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process, reliably protecting the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the tested safety of a global premium brand. Characteristics ModelDuracell Camcorder Replacement Battery DRC4L ApplicationCamera battery CompatibilityReplacement for Canon NB-4L TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)720 Energy (Wh)2.7 Dimensions (L x W x H in mm)approx. 40 x 35 x 6 Weight (g)approx. 18  FAQs about the Duracell DRC4L replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Canon chargers (e.g. the CB-2LVE) for the NB-4L battery. You can simply continue using your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a variety of Canon cameras that use the NB-4L. These include many models from the Canon Digital IXUS series (e.g. IXUS 100 IS, 110 IS, 120 IS, 130, 220 HS) as well as the PowerShot SD series. Please check compatibility in your camera's user manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in stores or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly disposal.

The Duracell DR9720 is a high-quality lithium-ion replacement battery, specially developed as a replacement for the compact Canon NB-6L battery. As a quality product from the world-renowned Duracell brand, this battery provides a reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a rated voltage of 3.7 V as well as a high capacity of 1000 mAh and is the ideal choice to extend the life of your trusted Canon IXUS or PowerShot cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Canon NB-6L or NB-6LH battery.Modern Li-Ion technology: High capacity of 1000 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge, and short circuit.Compact performance: 3.7 V voltage in an extremely flat and lightweight design.Long-lasting power for your Canon cameraThe Duracell DR9720 is the perfect energy solution for a wide range of popular and compact Canon digital cameras, especially the IXUS and PowerShot series. It ensures you have the stamina you need for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance until the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to fear any loss of capacity. The high energy density allows for a high capacity in an extremely compact and flat design, which exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect both the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Rely on the proven safety of a global premium brand. Features ModelDuracell Camcorder Replacement Battery DR9720 ApplicationCamera battery CompatibilityReplacement for Canon NB-6L TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)1000 Energy (Wh)3.7 Dimensions (L x W x H in mm)approx. 42 x 35 x 7 Weight (g)approx. 22  FAQs about the Duracell DR9720 replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Canon chargers (e.g. the CB-2LYE) for the NB-6L battery. You can simply continue using your existing charger.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to a loss of capacity when the battery was not fully discharged before each charge. Modern lithium-ion batteries, like this one, do not have this problem. You can recharge the battery at any charge level without affecting its lifespan.Which camera models is this battery suitable for?This battery is compatible with a wide range of Canon cameras that use the NB-6L battery. These include many models from the Canon Digital IXUS series (e.g. IXUS 85 IS, 95 IS, 200 IS, 210) as well as the PowerShot D, S and SX series. Please check your camera's user manual for compatibility.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail stores or at municipal recycling centres (e.g. via GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Duracell DRNEL3 is a high-quality lithium-ion replacement battery, specially developed as a replacement for the widely used Nikon EN-EL3 series battery models. As a quality product from the world-renowned Duracell brand, this battery offers reliable, long-lasting power and maximum safety for your camera equipment. It delivers a nominal voltage of 7.4 V and a capacity of 1600 mAh and is the ideal choice as a main or backup battery for your professional Nikon DSLR camera.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras using the Nikon EN-EL3, EN-EL3a or EN-EL3e battery.Modern Li-Ion technology: High capacity of 1600 mAh with no memory effect.High safety: Integrated protective electronics against overcharging, deep discharge and short circuits.Reliable performance: 7.4 V voltage for constant, powerful output.Long-lasting power for your Nikon cameraThe Duracell DRNEL3 is the perfect power solution for a wide range of Nikon digital single-lens reflex (DSLR) cameras. It ensures that you have the endurance you need for longer photo shoots, reporting or travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers crucial advantages. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to fear a loss of capacity. The high energy density enables a strong capacity in a compact design that exactly matches the original dimensions.Tested quality and safetyDuracell batteries are subject to stringent quality controls to ensure consistently high performance and maximum safety. Integrated protective electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DRNEL3 ApplicationCamera battery CompatibilityReplacement for Nikon EN-EL3e TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7.4 Capacity (mAh)1600 Energy (Wh)11.8 Dimensions (L x W x H in mm)approx. 56 x 39 x 21 Weight (g)approx. 80  FAQs about the Duracell DRNEL3 replacement batteryIs this battery compatible with my original Nikon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Nikon chargers (e.g. MH-18, MH-18a) for the EN-EL3 series. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and resulted in a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its lifespan.Which camera models is this battery suitable for?This battery is compatible with a wide variety of Nikon DSLR cameras that use the EN-EL3 series. This includes, among others, the Nikon D50, D70, D70s, D80, D90, D100, D200, D300, D300s and D700 models. Please check compatibility in the instruction manual of your camera.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail outlets or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly disposal.

The Duracell DR9641 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the compact Nikon EN-EL5 battery. As a quality product from the world-renowned brand Duracell, this battery offers a reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a nominal voltage of 3.7 V and a high capacity of 1180 mAh and is the ideal choice for extending the life of your proven Nikon Coolpix cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Nikon EN-EL5 battery.Modern Li-Ion technology: High capacity of 1180 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in a flat and lightweight design.Long-lasting power for your Nikon cameraThe Duracell DR9641 is the perfect power solution for a wide range of popular Nikon Coolpix digital cameras. It ensures that you have the stamina you need even during long photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance up to the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of rechargeable batteries. It does not suffer from the memory effect, which means you can recharge the battery at any time without fear of loss of capacity. The high energy density enables a high capacity in an extremely compact and flat design, which corresponds exactly to the original’s dimensions.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. An integrated protection circuit monitors the charging and discharging process and reliably protects the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust the tested safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9641 ApplicationCamera battery CompatibilityReplacement for Nikon EN-EL5 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)1180 Energy (Wh)4.4 Dimensions (L x W x H in mm)approx. 54 x 35 x 7 Weight (g)approx. 25  FAQs about the Duracell DR9641 replacement batteryIs this battery compatible with my original Nikon charger?Yes, this replacement battery is designed to be easily charged with original Nikon chargers (e.g. the MH-61) for the EN-EL5 battery. You can simply continue using your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to reduced capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries like this one do not have this problem. You can recharge the battery at any level without affecting its lifespan.For which camera models is this battery suitable?This battery is compatible with a wide range of Nikon cameras that use the EN-EL5. This includes many models in the Nikon Coolpix P series (e.g. P500, P510, P520, P530, P6000) as well as older models such as the Coolpix 3700, 4200, 5200, 5900, and 7900. Please check your camera’s instruction manual for compatibility.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery you can return it free of charge at collection points in shops or at municipal recycling centres (e.g. using the GRS collection boxes) to ensure professional and environmentally friendly recycling.

The Duracell DR9900 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the Nikon EN-EL9 and EN-EL9a battery models. As a quality product from the world-renowned brand Duracell, this battery offers a reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a rated voltage of 7.4 V and a capacity of 1000 mAh and is the ideal choice for extending the life of your trusted Nikon DSLR cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Nikon EN-EL9 or EN-EL9a battery.Modern Li-Ion technology: High capacity of 1000 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.4 V voltage for a constant and powerful output.Long-lasting power for your Nikon cameraThe Duracell DR9900 is the perfect power solution for a wide range of Nikon entry-level DSLR cameras. It ensures that you have the stamina you need for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last image.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means that you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a high capacity in a compact and lightweight design that corresponds exactly to the dimensions of the original.Tested quality and safetyDuracell Rechargeable batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera replacement battery DR9900 ApplicationCamera battery CompatibilityReplacement for Nikon EN-EL9 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7,4 Capacity (mAh)1000 Energy (Wh)7,4 Dimensions (L x W x H in mm)approx. 56 x 36 x 15 Weight (g)approx. 50  FAQs about the Duracell DR9900 replacement batteryIs this battery compatible with my original Nikon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Nikon chargers (e.g. the MH-23) for the EN-EL9 battery. You can simply continue to use your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Nikon DSLR cameras that use the EN-EL9 or EN-EL9a. These include the Nikon D40, D40x, D60, D3000 and D5000 models. Please check the compatibility in the operating instructions of your camera.How should this battery be disposed of?Rechargeable batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge to the collection points in shops or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure that it is recycled properly and in an environmentally friendly manner.

The Duracell DR9932 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the compact Nikon EN-EL12 battery. As a quality product from the world-renowned brand Duracell, this battery offers a reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a nominal voltage of 3.7 V and a high capacity of 1000 mAh and is the ideal choice for extending the life of your tried and tested Nikon Coolpix cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Nikon EN-EL12 battery.Modern Li-Ion technology: High capacity of 1000 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely flat and lightweight design.Long-lasting power for your Nikon cameraThe Duracell DR9932 is the perfect power solution for a wide range of popular and compact Nikon Coolpix digital cameras. It ensures that you have the stamina you need for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means that you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a high capacity in an extremely compact and flat design, which corresponds exactly to the dimensions of the original.Tested quality and safetyDuracell Rechargeable batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera replacement battery DR9932 ApplicationCamera battery CompatibilityReplacement for Nikon EN-EL12 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)1000 Energy (Wh)3.7 Dimensions (L x W x H in mm)approx. 44 x 32 x 8 Weight (g)approx. 25  FAQs about the Duracell DR9932 replacement batteryIs this battery compatible with my original Nikon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Nikon chargers (e.g. the MH-65) for the EN-EL12 battery. You can simply continue to use your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Nikon cameras that use the EN-EL12. These include many models of the Nikon Coolpix S series (e.g. S9900, S9700, S8000), P series (e.g. P330, P340) and AW series (e.g. AW130, AW120). Please check the compatibility in the operating instructions of your camera.How should this battery be disposed of?Rechargeable batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge to the collection points in shops or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure that it is recycled properly and in an environmentally friendly manner.

The Duracell DRNEL15 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the widely used Nikon EN-EL15 series battery models. As a quality product from the world-renowned Duracell brand, this battery offers reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a nominal voltage of 7.0 V and a capacity of 1700 mAh, making it the ideal choice as a primary or backup battery for your professional Nikon camera.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Perfect replacement: 100% compatible with cameras that use the Nikon EN-EL15, EN-EL15a or EN-EL15b battery.Modern Li-Ion technology: High capacity of 1700 mAh without memory effect.High safety: Integrated protection circuitry against overcharging, deep discharge and short circuit.Reliable performance: 7.0 V voltage for constant, powerful power delivery.Long-lasting energy for your Nikon cameraThe Duracell DRNEL15 is the perfect energy solution for a wide range of Nikon SLR (DSLR) and mirrorless cameras (Z series). It ensures you have the endurance you need for longer photo shoots, video sessions or travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up until the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages. It does not suffer from the memory effect, meaning you can recharge the battery at any time without having to worry about loss of capacity. The high energy density allows for strong capacity in a compact design that exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. An integrated protection circuitry monitors the charging and discharging process, reliably protecting both the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Rely on the tested safety of a global premium brand. Features ModelDuracell camera replacement battery DRNEL15 ApplicationCamera battery CompatibilityReplacement for Nikon EN-EL15 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7.0 Capacity (mAh)1700 Energy (Wh)11.9 Dimensions (L x W x H in mm)approx. 56 x 40 x 20 Weight (g)approx. 80  FAQs about the Duracell DRNEL15 replacement batteryIs this battery compatible with my original Nikon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Nikon chargers (e.g. MH-25, MH-25a) for the EN-EL15 series. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not completely discharged before each charge. Modern lithium-ion batteries like this one do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Nikon cameras that use the EN-EL15 series. These include many models in the Nikon D series (e.g. D7000, D7100, D7200, D750, D800, D810, D500) and the Z series (e.g. Z5, Z6, Z7). Please check compatibility in your camera manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in shops or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally sound recycling.

The Duracell DR9963 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the ultra-compact Nikon EN-EL19 battery. As a quality product from the world-renowned brand Duracell, this battery provides reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a rated voltage of 3.7 V and a capacity of 700 mAh and is the ideal choice to extend the life of your trusted Nikon Coolpix cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Nikon EN-EL19 battery.Modern Li-Ion technology: High capacity of 700 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely flat and lightweight construction.Long-lasting power for your Nikon cameraThe Duracell DR9963 is the perfect power solution for a wide range of popular and ultra-compact Nikon Coolpix digital cameras. It ensures that you have the stamina you need for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can count on low self-discharge when not in use and consistently high performance right up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of batteries. It does not suffer from the memory effect, which means you can recharge the battery at any time without suffering any loss of capacity. The high energy density allows for a high capacity in an extremely compact and flat construction that matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment against overheating, overvoltage and short circuits. Trust in the tested safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9963 ApplicationCamera battery CompatibilityReplacement for Nikon EN-EL19 TechnologyLithium-ion (Li-Ion) Rated voltage (V)3.7 Capacity (mAh)700 Energy (Wh)2.6 Dimensions (L x W x H in mm)approx. 40 x 31 x 6 Weight (g)approx. 15  FAQs about the Duracell DR9963 replacement batteryIs this battery compatible with my original Nikon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Nikon chargers (e.g. the MH-66) for the EN-EL19 battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not completely discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge state without affecting its service life.For which camera models is this battery suitable?This battery is compatible with a wide range of Nikon cameras that use the EN-EL19. These include, among others, many models from the Nikon Coolpix S series (e.g. S3100, S3300, S3500, S4100, S4300, S5200, S6500). Please check the compatibility in the operating instructions of your camera.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a device battery you can return it free of charge to the collection points in stores or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Duracell DR9630 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the Olympus BLM-1 battery. As a quality product from the world-renowned brand Duracell, this battery offers a reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a nominal voltage of 7.2 V and a high capacity of 1600 mAh and is the ideal choice for extending the service life of your tried and tested Olympus E-System cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Olympus BLM-1 battery.Modern Li-Ion technology: High capacity of 1600 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.2 V voltage for constant and powerful power output.Long-lasting power for your Olympus cameraThe Duracell DR9630 is the perfect power solution for a wide range of Olympus E-System DSLR cameras. It ensures that you have the stamina you need for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means that you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a high capacity in a compact and lightweight design that corresponds exactly to the dimensions of the original.Tested quality and safetyDuracell Rechargeable batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera replacement battery DR9630 ApplicationCamera battery CompatibilityReplacement for Olympus BLM-1 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7,2 Capacity (mAh)1600 Energy (Wh)11,5 Dimensions (L x W x H in mm)approx. 55 x 39 x 21 Weight (g)approx. 82  FAQs about the Duracell DR9630 replacement batteryIs this battery compatible with my original Olympus charger?Yes, this replacement battery is designed so that it can be easily charged with the original Olympus chargers (e.g. the BCM-1 or BCM-2) for the BLM-1 battery. You can simply continue to use your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Olympus cameras that use the BLM-1. These include the models E-1, E-3, E-5, E-30, E-300, E-330, E-500, E-510, E-520 as well as the C-5060, C-7070 and C-8080. Please check the compatibility in the operating instructions for your camera.How should this battery be disposed of?Rechargeable batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge to the collection points in shops or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure that it is recycled properly and in an environmentally friendly manner.

The Duracell DR9902 is a high-quality lithium-ion replacement battery that has been specially developed as a replacement for the Olympus BLS-1 battery. As a quality product from the world-renowned brand Duracell, this battery offers a reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a nominal voltage of 7.2 V and a capacity of 1000 mAh and is the ideal choice for extending the life of your tried and tested Olympus PEN or E-System cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Olympus BLS-1 battery.Modern Li-Ion technology: High capacity of 1000 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.2 V voltage for constant and powerful power output.Long-lasting power for your Olympus cameraThe Duracell DR9902 is the perfect power solution for a wide range of Olympus E-System DSLR cameras and mirrorless PEN cameras. It ensures that you have the stamina you need for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means that you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a high capacity in a compact and lightweight design that corresponds exactly to the dimensions of the original.Tested quality and safetyDuracell Rechargeable batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Battery features ModelDuracell Camera replacement battery DR9902 ApplicationCamera battery CompatibilityReplacement for Olympus BLS-1 TechnologyLithium-ion (Li-Ion) Rated voltage (V)7,2 Capacity (mAh)1000 Energy (Wh)7,2 Dimensions (L x W x H in mm)approx. 55 x 36 x 13 Weight (g)approx. 45  FAQs about the Duracell DR9902 replacement batteryIs this battery compatible with my original Olympus charger?Yes, this replacement battery is designed so that it can be easily charged with the original Olympus chargers (e.g. the BCS-1) for the BLS-1 battery. You can simply continue to use your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not completely discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.For which camera models is this battery suitable?This battery is compatible with a wide range of Olympus cameras that use the BLS-1. These include models from the PEN series (E-P1, E-P2, E-PL1) and DSLR cameras from the E series (e.g. E-400, E-410, E-420, E-450, E-600, E-620). Please check the compatibility in the operating instructions of your camera.How should this battery be disposed of?Rechargeable batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge to the collection points in the trade or to municipal recycling centres (e.g. via the GRS collection boxes) in order to ensure professional and environmentally friendly recycling.

The Duracell DR9709 is a high-quality lithium-ion replacement battery which has been specially developed as a replacement for the Panasonic battery CGA-S005 (as well as DMW-BCC12). As a quality product from the globally renowned brand Duracell, this battery offers reliable, long-lasting power supply and the highest safety for your camera equipment. It delivers a rated voltage of 3.7 V as well as a capacity of 1050 mAh and is the ideal choice to extend the life of your proven Panasonic Lumix cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Panasonic CGA-S005 battery.Modern Li-Ion technology: High capacity of 1050 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely flat and lightweight design.Long-lasting energy for your Panasonic cameraThe Duracell DR9709 is the perfect power solution for a wide range of popular and compact Panasonic Lumix digital cameras. It ensures that you have the stamina you need even for longer photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last image.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of batteries. It does not suffer from the memory effect, which means that you can recharge the battery at any time without worrying about loss of capacity. The high energy density allows for a strong capacity in an extremely compact and flat design, which exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to guarantee consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment against overheating, overvoltage and short circuits. Trust in the tested safety of a global premium brand. Features ModelDuracell camera replacement battery DR9709 ApplicationCamera battery CompatibilityReplacement for Panasonic CGA-S005 TechnologyLithium-ion (Li-Ion) Rated voltage (V)3.7 Capacity (mAh)1050 Energy (Wh)3.9 Dimensions (L x W x H in mm)approx. 40 x 35 x 9 Weight (g)approx. 26  FAQs about the Duracell DR9709 replacement batteryIs this battery compatible with my original Panasonic charger?Yes, this replacement battery is designed so that it can easily be charged with the original Panasonic chargers for the CGA-S005 battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect was present in older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any given charge level without negatively impacting its life span.For which camera models is this battery suitable?This battery is compatible with a wide range of Panasonic Lumix cameras that use the CGA-S005. These include, among others, many models from the DMC-FX series (e.g. FX01, FX3, FX8, FX9, FX10, FX12, FX50, FX100, FX150) and the DMC-LX series (e.g. LX1, LX2, LX3). Please check the compatibility in the manual of your camera.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return this free of charge to the collection points in retail stores or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly recycling.

Duracell Panasonic e DR9952 for e DMW-BMB9E 7.4V 895mAh

The Duracell DR9686 is a high-quality lithium-ion replacement battery specially developed as a replacement for the widely used Samsung BP70A battery. As a quality product from the world-renowned Duracell brand, this battery provides reliable, long-lasting power and maximum safety for your camera equipment. It delivers a nominal voltage of 3.7 V and a capacity of 740 mAh and is the ideal choice to extend the life of your proven Samsung digital cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Samsung BP70A battery.Modern Li-Ion technology: High capacity of 740 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely flat and lightweight design.Long-lasting power for your Samsung cameraThe Duracell DR9686 is the perfect energy solution for a wide range of slim Samsung compact cameras in the ES, PL, ST and SL series. It ensures that you have the stamina you need for longer photo shoots, on holiday or at parties. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of battery. It does not suffer from the memory effect, meaning you can recharge the battery at any time without fearing a loss of capacity. The high energy density enables solid capacity in an extremely compact and flat design that exactly matches the original’s dimensions.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protective electronics monitor the charge and discharge process and reliably protect the battery and your valuable camera equipment against overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9686 ApplicationCamera battery CompatibilityReplacement for Samsung BP70A TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)740 Energy (Wh)2.7 Dimensions (L x W x H in mm)approx. 40 x 31 x 6 Weight (g)approx. 18  FAQs about the Duracell DR9686 replacement batteryIs this battery compatible with my original Samsung charger?Yes, this replacement battery is designed so it can be easily charged with the original Samsung chargers for the BP70A battery. You can simply continue to use your existing charging station or charging cable.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries like this do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Samsung cameras that use the BP70A. This includes models from the ES series (e.g. ES65, ES70, ES80), PL series (e.g. PL100, PL120, PL20, PL80), ST series (e.g. ST60, ST70, ST80), as well as SL and WP models. Please check compatibility in your camera's operating instructions.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail stores or to municipal recycling centres (e.g. via GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Duracell DR9667 is a high-quality lithium-ion replacement battery that has been specially developed to replace the widely used Samsung SLB-10A battery. As a quality product from the world-renowned brand Duracell, this battery provides reliable, long-lasting power and maximum safety for your camera equipment. It offers a nominal voltage of 3.7 V and a high capacity of 1050 mAh and is the ideal choice to extend the life of your trusted Samsung digital cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Samsung SLB-10A battery.Modern Li-Ion technology: High capacity of 1050 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge, and short circuit.Reliable performance: 3.7 V voltage for constant and powerful output.Long-lasting power for your Samsung cameraThe Duracell DR9667 is the perfect power solution for a wide variety of Samsung compact cameras from the ES, EX, WB, and PL series. It ensures that you have the necessary endurance for extended photo shoots, on holiday, or at parties. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and on consistently high performance up to the last photo.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers key advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a strong capacity in a compact and lightweight design that matches the dimensions of the original exactly.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect both the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9667 ApplicationCamera battery CompatibilityReplacement for Samsung SLB-10A TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)1050 Energy (Wh)3.9 Dimensions (L x W x H in mm)approx. 43 x 31 x 7 Weight (g)approx. 22  FAQs about the Duracell DR9667 replacement batteryIs this battery compatible with my original Samsung charger?Yes, this replacement battery is designed to be easily charged with the original Samsung chargers for the SLB-10A battery. You can simply continue to use your existing charging station or charging cable.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, like this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Samsung cameras that use the SLB-10A. These include models from the ES series (e.g. ES55, ES60), PL series (e.g. PL50, PL60, PL70), WB series (e.g. WB150F, WB250F, WB500, WB550, WB750, WB800F) as well as EX2F and M100. Please check your camera's manual for compatibility.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail stores or municipal recycling facilities (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Duracell DR9668 is a high-quality lithium-ion replacement battery specifically developed as a substitute for the widely used Sony NP-BG1 and NP-FG1 batteries. As a quality product from the world-renowned Duracell brand, this battery offers reliable, long-lasting power supply and the highest safety for your camera equipment. It delivers a rated voltage of 3.7 V and a high capacity of 1050 mAh and is the ideal choice to extend the life of your reliable Sony Cyber-shot cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Sony NP-BG1 or NP-FG1 battery.Modern Li-Ion technology: High capacity of 1050 mAh without memory effect.High safety: Integrated protective electronics against overcharging, deep discharge and short circuit.Reliable performance: 3.7 V voltage for a constant and powerful output.Long-lasting power for your Sony cameraThe Duracell DR9668 is the perfect power solution for a wide range of popular Sony Cyber-shot digital cameras from the W, H, T and N series. It ensures that you have the endurance you need even during longer photo shoots, on holiday or at celebrations. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance until the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of batteries. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a strong capacity in a compact and lightweight design that exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protective electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9668 ApplicationCamera battery CompatibilityReplacement for Sony NP-BG1 / NP-FG1 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)1050 Energy (Wh)3.9 Dimensions (L x W x H in mm)approx. 42 x 35 x 8 Weight (g)approx. 26  FAQs about the Duracell DR9668 replacement batteryIs this battery compatible with my original Sony charger?Yes, this replacement battery is designed to be easily charged with the original Sony chargers (e.g. BC-CSG) for the NP-BG1 battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge status, without impairing its lifetime.Which camera models is this battery suitable for?This battery is compatible with a wide range of Sony Cyber-shot cameras that use the NP-BG1 or NP-FG1. These include, among others, models from the DSC-W series (e.g. W30, W50, W80, W290), the DSC-H series (e.g. H3, H10, H20), the DSC-T series (e.g. T20, T100) as well as the DSC-N series. Please check the compatibility in your camera's manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in shops or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure correct and environmentally friendly recycling.

The Duracell DR9695 is a high-quality lithium-ion replacement battery, specially developed as a high-performance alternative for the Sony NP-FM500H battery. As a quality product from the globally renowned brand Duracell, this battery offers reliable, long-lasting power and maximum safety for your professional camera equipment. It delivers a rated voltage of 7.2 V and a capacity of 1600 mAh and is the ideal choice to extend the life of your Sony Alpha DSLR and SLT cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Sony NP-FM500H battery (M series).Modern Li-Ion technology: High capacity of 1600 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.2 V voltage for constant and powerful power output.Long-lasting power for your Sony AlphaThe Duracell DR9695 is the perfect power solution for a wide range of Sony Alpha DSLR and SLT cameras. It ensures you have the necessary staying power even during longer photo shoots, reports or in the studio. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers key advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without the risk of loss of capacity. The high energy density enables strong capacity in a compact form factor that exactly matches the original dimensions.Tested quality and safetyDuracell batteries are subject to strict quality control to ensure consistently high performance and maximum safety. Integrated protection electronics monitor charging and discharging and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust the tested safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9695 ApplicationCamera battery (DSLR) CompatibilityReplacement for Sony NP-FM500H TechnologyLithium-ion (Li-Ion) Rated voltage (V)7.2 Capacity (mAh)1600 Energy (Wh)11.5 Dimensions (L x W x H in mm)approx. 56 x 38 x 21 Weight (g)approx. 78  FAQs about the Duracell DR9695 replacement batteryIs this battery compatible with my original Sony charger?Yes, this replacement battery is designed to work seamlessly with original Sony chargers (e.g. BC-VM10) for the NP-FM500H battery. You can continue to use your existing charging station as usual.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, like this one, do not have this problem. You can recharge the battery at any charge level without compromising its lifespan.For which camera models is this battery suitable?This battery is compatible with a wide range of Sony Alpha cameras that use the NP-FM500H. These include, among others, the models Alpha A57, A58, A65, A77, A77 II, A99, A100, A200, A300, A350, A450, A500, A550, A560, A580, A700, A850 and A900. Please check the compatibility in your camera's user manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a waste device battery, you can return it free of charge to collection points in stores or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

Duracell DRC511 camcorder replacement battery for Canon BP-511 7.4V 1,600mAh

The Duracell DR9689 is a high-quality lithium-ion replacement battery, specially developed as a replacement for Canon BP-808 series battery models. As a quality product from the world-renowned brand Duracell, this battery offers reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a nominal voltage of 7.4 V and a capacity of 890 mAh, making it the ideal choice to extend the lifespan of your trusted Canon LEGRIA camcorders.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Canon BP-808 battery.Modern Li-Ion technology: High capacity of 890 mAh without a memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.4 V voltage for a constant and powerful output.Long-lasting power for your Canon cameraThe Duracell DR9689 is the perfect power solution for a wide variety of popular Canon LEGRIA camcorders. It ensures that you have the necessary stamina even during longer video recordings. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance until the very last minute.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without fear of loss of capacity. The high energy density allows strong capacity in a compact and lightweight design, which exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protective electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camcorder Replacement Battery DR9689 ApplicationCamcorder / camera battery CompatibilityReplacement for Canon BP-808 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7.4 Capacity (mAh)890 Energy (Wh)6.6 Dimensions (L x W x H in mm)approx. 40 x 30 x 22 Weight (g)approx. 45  FAQs about the Duracell DR9689 replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Canon chargers for the BP-808 series. You can continue to use your existing charging station without issue.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to a loss of capacity if the battery was not completely discharged before each charge. Modern lithium-ion batteries, like this one, no longer have this problem. You can recharge the battery at any charge level without impacting its lifespan.Which camera models is this battery suitable for?This battery is compatible with a wide range of Canon camcorders using a BP-808 series battery. These include many models of the Canon LEGRIA HF M, HF S, HF G, XA, and VIXIA series, among others. Please check compatibility in your camera’s user manual.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge to the collection points in retail stores or to municipal recycling centres (e.g., via the GRS collection boxes) to ensure proper and environmentally friendly disposal.

The Duracell DR9967 is a high-quality lithium-ion replacement battery, specially developed as a replacement for the widely used Sony NP-FW50 battery. As a quality product from the world-renowned brand Duracell, this battery offers a reliable, long-lasting power supply and maximum safety for your camera equipment. It supplies a nominal voltage of 7.4 V and a capacity of 1020 mAh, making it the ideal choice to prolong the life of your proven Sony Alpha system cameras and NEX models.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Sony NP-FW50 battery.Modern Li-Ion technology: High capacity of 1020 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Reliable performance: 7.4 V voltage for a constant and powerful output.Long-lasting power for your Sony cameraThe Duracell DR9967 is the perfect power solution for a wide range of popular Sony Alpha system cameras (e.g. Alpha 6000 series, first and second generation Alpha 7 series) as well as for many NEX and Cybershot models. It ensures that you have the necessary stamina even during longer photo shoots or video recordings. Thanks to modern lithium-ion technology, you can rely on a low self-discharge when not in use and consistently high performance until the last picture.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers crucial advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss in capacity. The high energy density enables a high capacity in a compact and lightweight design that exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process and reliably protect both the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Rely on the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9967 ApplicationCamera battery CompatibilityReplacement for Sony NP-FW50 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)7.4 Capacity (mAh)1020 Energy (Wh)7.5 Dimensions (L x W x H in mm)approx. 45 x 32 x 19 Weight (g)approx. 45  FAQs about the Duracell DR9967 replacement batteryIs this battery compatible with my original Sony charger?Yes, this replacement battery is designed so that it can be easily charged with the original Sony chargers (e.g. BC-TRW, BC-VW1) for the NP-FW50 battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, like this one, do not have this problem. You can recharge the battery at any charge level without impairing its service life.Which camera models is this battery suitable for?This battery is compatible with a wide variety of Sony cameras that use the NP-FW50. These include the Alpha 6000, 6300, 6500, Alpha 7, 7 II, 7R, 7R II, 7S, 7S II models as well as models in the NEX series and the Cybershot DSC-RX10. Please check compatibility in your camera's operating instructions.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge to the collection points in shops or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

The Yuasa SWL1800 is a VRLA high-performance battery with 12 volts, 57.6 Ah (C20) and 1974 W 10-minute power rating per block. It combines high short-term performance with a long service life and optional flame-retardant housing. Ideal for UPS systems, emergency and safety power supplies, data centres, telecommunications, and industrial control systems.Highlights at a glanceHigh performance: 1974 W per block at 10 minutes up to 9.6 V block voltage, alternatively 329 W per cell up to 1.6 V per cell at 20°C.Strong current output: up to 800 A for 1 second, 500 A for 1 minute.Long service life: EUROBAT Long Life 10 to 12 years, Yuasa service life up to 10 years at 20°C.Easy installation: M6 internal thread or bolt connection, recommended tightening torque 4.8 Nm.Low self-discharge: about 3 percent per month at 20°C.Top performance for demanding applicationsWith its very low impedance and high short-term current capabilities, the SWL1800 is ideal for uninterruptible power supply systems with high power density, safety power supplies, communication nodes, industrial buffering, and critical infrastructures, as it reliably delivers peak performance and stable voltage.Efficiency meets long service lifeFor standby operation, a float charge voltage of 13.65 V ±1 percent per block (2.275 V per cell) at 20°C is recommended, supplemented by temperature compensation of minus 3 mV per cell and degree Celsius. No current limitation is necessary in this charging mode. For high-rate charging, 14.50 V ±3 percent per block (2.42 V per cell) is recommended, with a compensation of minus 4 mV per cell and degree Celsius. A current limitation of 13.75 A is recommended here.Technology for flexible applicationsThe wide temperature range allows versatile use: Discharge from -20°C to +60°C, charge from -15°C to +50°C and storage from -20°C to +50°C. The robust housing is made of ABS to UL94 HB as standard; an FR version to UL94 V0 is also available. Each cell is equipped with a low pressure valve for safe pressure regulation. VRLA batteries must not be operated in gas-tight housings, as hydrogen may be generated.Features  ModelYuasa SWL1800 Battery typeVRLA AGM (high load, maintenance-free) Rated voltage (V)12 Capacity (Ah)42 (at 20h rate) Maximum power1800 Watt per cell (at 15 minutes) Charging voltage (float charge)13.5V to 13.8V Charging voltage (cyclic operation)14.4V to 15.0V Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeDesign Life EUROBAT 10-12 years Dimensions (L/W/H, mm)210 x 175 x 175 Weight (kg)16.3 ConnectionM6 thread CertificationsIEC 60896-21+22, UL, VdS  FAQs about the Yuasa SWL1800 batteryWhat is the SWL1800 designed for?For applications such as UPS that require high short-term performance, the SWL series is a VRLA range with high discharge capacity. This series is designed for a long service life of 10 to 12 years according to EUROBAT.What is the capacity of the battery?The nominal voltage is 12 V, with a capacity of 57.6 Ah at a 20-hour rate and 55 Ah at C10.How much power does it deliver under high current discharge?The typical 10-minute constant power is 1974 W per block up to 9.6 V at 20°C. Temperature rangesWhat temperature ranges and self-discharge should be considered?The recommended temperature ranges are:Storage (fully charged): -20°C to +50°CCharging: -15°C to +50°CDischarging: -20°C to +60°CThe typical self-discharge rate is about 3 percent per month at 20°C.Can the SWL1800 be operated in a closed housing?No, VRLA batteries emit hydrogen gas. Ensure sufficient ventilation and avoid operating in airtight enclosures.What is the difference between SWL and NPL?The SWL series is a further developed NPL design with improved energy-to-density ratio and up to 40 percent additional discharge capacity for high current discharge.

The YUASA SWL2300E impresses with high power reserves, long service life and absolute reliability in industrial use. With 12 V nominal voltage, 78 Ah capacity and a constant power output of up to 2400 watts, this VRLA battery is in the top class among valve-regulated lead-acid batteries. Ideal for UPS systems, security technology, emergency power solutions and industrial control systems.Highlights at a glanceHigh power density: Delivers up to 2400 W with 10-minute discharge down to 9.6 V.Long-term operation: EUROBAT "Long Life" – up to 12 years service life.High discharge current: Up to 520 A for 1 second – ideal for peak loads.Maintenance-free: VRLA technology with reliable gas pressure regulation.Robust & safe: Housing made of ABS (UL94:HB), FR version on request (UL94:V0).Reliable performance for critical systemsThe SWL2300E is part of Yuasa's proven SWL series, developed for the highest demands in industrial environments. With a capacity of 78 Ah (10h rate) and 80 Ah (20h rate) as well as an impressive power output of 2400 W with a 10-minute discharge, the battery is particularly suitable for applications with high load fluctuations and constant power requirements.Thanks to a maximum discharge current of 520 A for 1 second, even critical load peaks can be reliably intercepted. The internal resistance is only 7.71 mΩ in accordance with EN IEC 60896-21.Durable, robust and efficientThe SWL2300E meets the EUROBAT classification "Long Life" (10–12 years) and thus offers a sustainable solution for uninterrupted power supply. The low self-discharge rate of only approx. 3% per month ensures that the battery remains ready for use even after prolonged storage.The maintenance-free operation is based on VRLA technology with integrated safety valves for gas pressure regulation. The robust, flame-retardant ABS housing provides reliable protection against mechanical influences. The FR version with UL94:V0 is available on request.Flexible installation and easy integrationThe SWL2300E can be installed in any position up to 90° tilt to the vertical. The M6 connections with internal thread or stud connection enable simple and safe installation. No current limitation is necessary for float charging, and in cyclic operation the maximum charging current is 19.5 A. The battery is certified to ISO 9001, ISO 14001 and ISO 45001 and meets the highest requirements for quality, environmental management and occupational safety.  ModelYuasa SWL2300E Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)78 (at 20h rate) Maximum discharge current1000A (for 1 second) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.5V (±3%) Operating temperature (°C)Charge: -15 ~ 50 / Discharge: -20 ~ 60 Storage temperature (°C)-20 ~ 50 Service lifeup to 10 years (according to Yuasa design) Dimensions (L/W/H, mm)260 x 169 x 211 Weight (kg)26.8 ConnectionM6 thread CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa SWL2300E lead-acid batteryWhat are its dimensions and weight?Dimensions: 261 × 168 × 225 mm (L × W × H), ± tolerances according to manufacturer. Weight: approx. 28–28.3 kg.Which connections are installed?It features temperature-compensated M6 screw connections with a recommended tightening torque of 4.8 Nm.For which applications is the battery suitable?Ideal for UPS systems, telecommunications, security and emergency lighting systems as well as photovoltaic storage thanks to high discharge capacity and long service life.What charging voltages are recommended?Float/standby charging: 13.65 V/block (2.275 V/cell), temperature-compensated –3 mV/°C/cell.Cyclic/boost charging: 14.5 V/block (2.42 V/cell), -4 mV/°C/cell. Float current unlimited, cycle current max. 19.5A.Are safety features integrated?Each cell has a low-pressure relief valve for gas pressure equalisation. In addition, the VRLA technology with almost 100% oxygen recombination reduces gas development. 

This NiMH battery is the modern replacement for the compact 3.6 Volt battery packs from HBC Radiomatic. It replaces both the older NiCd versions (often known as BA225030 or FuB 05A) as well as the NiMH standard batteries (BA205000 / BA205030 / FuB 05AA).With a capacity of nowadays mostly 2,000 mAh to 2,100 mAh (compared to the old 700–1500 mAh), this battery offers a tremendous increase in run time for your crane remote. It is primarily used in the more compact HBC handsets of the micron, linus and eco series.Highlights at a glanceMore stamina: Thanks to high-quality NiMH cells (mostly AA size inside), this battery offers significantly more capacity than the old originals. Your handset will easily last long working shifts.Full compatibility (3.6V): Identical replacement for HBC original numbers BA205000, BA205030, BA225030 as well as the designations FuB 05AA (NiMH) and FuB 05A (NiCd).Environmentally friendly technology: No more toxic cadmium. The NiMH battery has no memory effect and can be recharged flexibly at any time.HBC fit: Features the typical orange (or black) housing with the two base contacts and snaps securely into the battery compartment.Charging compatibility: Works perfectly with the original HBC chargers (e.g. QE10860, QA10860), provided these are designed for 3.6V or have automatic voltage detection.Compatible transmitter series (excerpt)This 3.6V battery fits into many handsets that do not require the large 6V block:Micron series: micron 4, micron 5, micron 6, micron 7 (please check voltage, some use 6V!)Eco series: ecoLinus series: linus 4, linus 6Spectrum series: spectrum A (some versions), spectrum 1 (with 3.6V conversion)Technos series: technos 1, technos 2 (with 3.6V version)Vector series: vector pro Features ModelReplacement battery for HBC Radiomatic 3.6V Replaces original no.**BA225030**, **BA205030**, BA205000, BA225000, FuB 05 AA, FuB 05 XL Chemistry**NiMH** (Nickel-metal hydride) Voltage**3.6 V** (Be sure to check!) CapacityTypically **1500 mAh to 2100 mAh** (Longer runtime than old NiCd) Compatible transmitters (excerpt)**micron 4**, **micron 5**, **micron 6**, **micron 7**, eco, linus 6, quadrix DesignOrange block (identical size as 6V, but lighter) Charging noteIntelligent HBC chargers (e.g. QD109300) often detect the voltage automatically Contact type2 flat contacts on top Weight (g)approx. 160 - 180 (Noticeably lighter than the 6V battery) FAQs for HBC BA205030 / FuB 05AAAttention: 3.6 Volt or 6 Volt?This is the most important distinction at HBC!This battery (BA205030) has 3.6 Volt (3 cells).The larger sibling (BA203060) has 6.0 Volt (5 cells). They look almost the same visually, but the 6V battery is somewhat thicker/heavier. Always check the type plate of your old battery or the battery compartment. A 6V battery often does not fit mechanically in a 3.6V bay and vice versa.My old battery only has 700 mAh. Can I use the 2000 mAh battery?Yes, that is a huge advantage. The old NiCd batteries had less capacity due to technical reasons. The new NiMH battery lasts almost three times as long at the same voltage (3.6V).What do the colours of the batteries mean (Orange vs. Black)?In the past, orange was often for standard batteries and black for ex-protected areas (ATEX) or newer NiMH series. In replacement batteries, the colour is usually orange (standard) or black, but often has no technical relevance regarding explosion protection. Important: If you work in explosion-protected areas (ATEX), you may use only certified original batteries with corresponding ex-marking, not standard replicas!

This is the most powerful expansion stage for the 3.6 volt Hetronic system. With a nominal capacity of 2,500 mAh (2.5 Ah), this battery pushes the technical maximum of modern nickel-metal hydride technology in this form factor.It replaces the original batteries 68300900 (standard NiMH) and 68300600 (old NiCd) and compared to these (often only 1200 or 1500 mAh), offers a maximum extension of runtime. This battery is the first choice for intensive, continuous use in multi-shift operations, as it lasts an extremely long time before it needs to be put back on the charger.Highlights at a glanceMaximum capacity (2.5 Ah): With 2,500 mAh, this battery offers the highest possible energy density for this type. That means for you: fewer charging cycles, fewer work interruptions and maximum availability of your radio remote control.Specialist for 3.6V: Designed for Hetronic systems with 3 cells (3.6 volts). It fits perfectly in the Ergo Series and the rarer 3.6V version of the Mini transmitter.100% compatible replacement: Replaces identically Hetronic part numbers 68300900, 68300600, 68300800 and 68300850.State-of-the-art NiMH cells: Uses high-current-quality cells without memory effect. They also replace old, environmentally harmful NiCd batteries (68300600) easily and in an environmentally friendly way.Robust housing: The battery is installed in a precisely fitting plastic housing (mostly black), which protects the cells from impacts and moisture.Compatible models (extract)Important: Please always check whether your device needs 3.6 volt!Hetronic Ergo: Ergo, Ergo-F, Ergo-M (transmitter in "banana shape" – here 3.6V is standard).Hetronic Mini: Attention! Only suitable for Mini transmitters designed for 3.6V. (Most mini transmitters use 9.6V and require a different, thicker battery!).Hetronic Nova-S: (3.6V versions only). Characteristics ModelReplacement battery for Hetronic 3.6V (Ultra-High-Power) Replaces original no.**68300800**, 68300850, 68100800, HE900, HT-01 Chemistry**NiMH** (Nickel-metal hydride) - High energy density Voltage**3.6 V** (3 high-performance cells) Capacity**2500 mAh (2.5 Ah)** - The absolute maximum for this form factor Compatible transmitters (extract)Hetronic **ERGO** (Ergo-F), **MINI-HET**, **POCKET**, **Nova-S** (3.6V only!) Form factorCompact black block (approx. 60 x 54 x 22 mm) Charging timeIncreases slightly compared to standard batteries (as more energy is being charged) FeatureIdeal for continuous use in forestry or construction without charging option Weight (g)approx. 110 - 130 (highest cell density)  FAQs about the Hetronic 3.6V 2500mAh batteryCan my charger handle the high capacity of 2500 mAh?Yes.Your Hetronic charger charges the battery fully. However, since the "tank" is very large (2.5 Ah), charging takes longer than with the old original battery (e.g. 1.2 Ah). Expect double the charging time, but the battery will last twice as long in operation.Why doesn’t the battery fit in my Hetronic Mini?You probably have the 9.6V version.This is the most common mistake: most Hetronic Mini transmitters use a 9.6V battery (part number 68300520). This is square and thicker. The 3.6V battery (68300900) offered here is flatter. Please check the number on your old battery. If it says 683005... you need 9.6V. If it says 683009... or 6... then this one is correct for you.What are the benefits of upgrading from NiCd (68300600) to NiMH?More performance and environmental protection.The old NiCd batteries had the "memory effect" (capacity loss with partial discharge) and contained toxic cadmium. This NiMH battery is robust, can be recharged at any time, and delivers more stable voltage for the electronics.

This NiMH battery is the compact power source for the smaller transmitters of the Hetronic family. It has been specifically designed as a replacement for the "short" design (often referred to as "mini battery").In contrast to the large Nova-L batteries, which have a long design, this battery is almost square. It replaces the original batteries with the part numbers 68300510 and 68300520. With 9.6 Volt and 750 mAh it delivers exactly the power required for the compact transmitter controls.Highlights at a glanceSpecific "short" design: This battery is designed for the compact battery shafts (approx. dimensions 60 x 50 x 14 mm). It does not fit holders that require the long Nova-L battery, but is the standard replacement part for the "Mini" series.100% replacement for 68300xxx: Replaces the Hetronic original numbers 68300510, 68300520 as well as often 68300500 (if it is the NiMH version).Modern NiMH technology: No memory effect. Unlike old NiCd cells, this battery can be recharged as needed. It is more environmentally friendly and provides stable voltage for the transmitter electronics.Suitable for Hetronic Mini: This is the standard battery for the popular Hetronic Mini vendor tray transmitters and the Nova-S (Short) series.Black housing: The battery comes in the typical black plastic housing with 4 contacts on the front side, matching the original design.Compatible transmitter seriesThis battery is (mechanically) suitable for the following devices:Hetronic Mini: The classic small vendor tray transmitter.Hetronic Nova-S: The short version of the Nova handheld transmitters.Hetronic Nova-M: (Please check battery compartment, some use the long battery).Attention: It does not fit Nova-L or Nova-XL, if these must fully fill the long slot or require a higher capacity (2000 mAh)! Characteristics ModelReplacement battery for Hetronic Nova "Short" / Mini Replaces original no.**68300520**, **68300600**, 68300900, Mini 68300900 Chemistry**NiMH** (nickel-metal hydride) - upgrade to old NiCd Voltage9.6 V Capacity**750 mAh (0.75 Ah)** - Standard for the short design Compatible transmitters (excerpt)Hetronic Nova-S, Nova-M, GL, GK (Please check battery compartment!) DesignRectangular block, black (rarely yellow in replicas) Dimensions (L x W x H in mm)**approx. 114 x 49 x 14** (The length is decisive!) Charging noticeCompatible with Hetronic chargers for 9.6V systems Weight (g)approx. 150 - 170 FAQs for the Hetronic Nova Short (68300520)How do I know if I need the "short" or "long" battery?This is the most important point with Hetronic!Short (this battery): Is almost square (approx. 6 cm long). Capacity mostly 750 mAh.Long (Nova-L): Is elongated rectangular (approx. 12 cm long, looks like two short ones together). Capacity mostly 1500–2000 mAh. Measure your old battery. If it is only approx. 6 cm long, you need this one.Is 750 mAh not too little?Not for the "Mini" transmitters. Since the Hetronic Mini transmitters usually don't have large colour displays or power-hungry additional functions, the 750 mAh capacity is perfectly sufficient for a normal working day. The small housing does not physically allow cells with 2000 mAh at 9.6V.Will it fit in my Hetronic charger?Yes. The yellow or black Hetronic chargers usually have a slot which can accommodate both short and long batteries (the long one protrudes further, the short one disappears further inside, or the slot is universal). The charging contacts are identically positioned.

The OPTIMA YellowTop YT S 2.1 is a revolutionary 6-volt high-performance AGM battery that, thanks to the patented SPIRALCELL TECHNOLOGY®, combines the starting power of a starter battery with the cycle durability of a supply battery. With a nominal voltage of 6 V and a capacity of 38 Ah, it is the ultimate solution for classic vehicles and special applications that have been retrofitted with modern, high-current consumers. Its extreme vibration resistance and absolutely maintenance-free, leak-proof design make it the first choice for the most demanding 6-volt applications.Highlights at a glance6-volt dual-purpose functionality: Offers starting power and cycle durability for classic vehicles with high energy requirements.SPIRALCELL TECHNOLOGY®: Unique spiral cell design for extreme vibration resistance and longer service life.High cycle durability: Ideal for vintage cars with modern hi-fi systems or additional lighting.Absolutely maintenance-free and leak-proof: The sealed AGM design allows installation in almost any position and protects valuable original materials.Fast recharge: Absorbs charge considerably more quickly than conventional 6-volt batteries.Maximum performance for classic vehicles with modern requirementsThe OPTIMA YellowTop YT S 2.1 was purpose-built for the special requirements of 6-volt vehicles that need more than just starting current. It is the ideal choice for vintage cars, hot rods, and tractors equipped with powerful stereo systems, navigation systems, electric fans or other modern consumers. It reliably provides the high current to start the engine and then powers the additional equipment when stationary without losing performance.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used which are wrapped with a glass fibre fleece (AGM). This compact and extremely robust design minimises internal resistance, resulting in superior starting power, faster charging and unmatched vibration resistance. This technology makes the YellowTop the perfect hybrid solution for demanding 6-volt systems.Built for the most demanding conditionsThe OPTIMA YellowTop is designed for tough use. Its sealed construction not only prevents acid leakage—which is especially important in valuable vintage cars to avoid damage to paint and bodywork—but also evaporation. This makes it absolutely maintenance-free. The up to 15 times higher vibration resistance compared to conventional batteries ensures that vibrations in older vehicles do not harm the battery. Features  ModelOPTIMA YellowTop YT S 2.1 TechnologyAGM Spiralcell Nominal voltage (V)6 Capacity (Ah)38 Cold start current EN (A)460 Dimensions (L x W x H in mm)254 x 90 x 206 ConnectionSAE car pole Weight (kg)approx. 8.9  FAQs on the OPTIMA YellowTop 6V batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY® in a classic car?In classic vehicles, spiral cell technology offers two decisive advantages: Firstly, extreme vibration resistance, which is very useful in older chassis. Secondly, it is completely leak-proof, which protects valuable paint and bodywork from acid damage—a common problem with old wet batteries.What is the difference between the 6V YellowTop and the 6V RedTop?YellowTop (6V): A dual-purpose battery (starting and supply). It is ideal for 6-volt vehicles with additional electrical consumers such as a powerful music system, as it can handle deep discharges. RedTop (6V): A pure high-performance starter battery. It is the right choice if starting is the main load and no significant consumers are operated when stationary.Do I need a special charger for this 6V AGM battery?Yes, it is very important to use a modern, microprocessor-controlled charger that is suitable for both 6 volt and AGM technology. Old, unregulated 6-volt chargers can damage the battery through overvoltage.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any dealer who sells new batteries or to municipal recycling centres to ensure proper disposal.

The XCELL XP7-12 is a valve-regulated AGM battery with 12 volts and a rated capacity of 7 Ah (C20). It impresses with its compact dimensions, high operational reliability and long service life. Thanks to its robust construction and low self-discharge, it is ideally suited for use in security and emergency power systems, medical technology, measurement and control technology, telecommunications, and in numerous mobile and stationary applications.Highlights at a glanceCompact power: 12 V, 7.0 Ah (20h)VdS approved: G 120023 for safety-related applicationsFlexible usage: Any operating position is possible (except permanently upside down)Long-lasting: Up to 5 years design life at 20 °CHigh reliability: Low self-discharge <3 % per month at 25 °CRobust housing: ABS UL94 HBReliable power supply for a wide range of applicationsXCELL ’s XP7-12 delivers consistent performance even under demanding conditions. AGM technology ensures efficient gas recombination, making the battery virtually maintenance-free. With a maximum discharge current capacity of 105 A (5 seconds), it is also suitable for applications with short-term peak loads.Efficiency meets durabilityIn standby mode, the battery should be charged to a voltage of 2.25–2.30 V/cell. For cyclic operation, a charging voltage of 2.45–2.50 V/cell is recommended. The temperature compensation is –3 mV/cell/°C in standby mode and –4 mV/cell/°C in cyclic operation. The recommended maximum current is 0.3C (approx. 2.1 A). In cyclic use, the battery achieves several hundred charge and discharge cycles, depending on the depth of discharge.Technology for flexible applicationsThe operating temperature range of the cells is between –15 °C and +50 °C during charging. During discharge, it is –20 °C to +60 °C, and during storage –20 °C to +50 °C. T1 or T2 plug-in connectors are available for the electrical connection. The recommended tightening torque for this is between 2 and 3 Newton metres. Each cell is also equipped with a safety valve, which further enhances operational safety.Features  ModelXCELL XP7-12 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20-hour rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  FAQ on the XCELL XP7-12 industrial batteryFor which applications is the XP7-12 ideally suited?The XCELL XP7-12 is ideal for emergency power supply, security and fire alarm systems, medical technology, telecommunications, measurement and control technology, as well as mobile devices with cyclic energy requirements.How cycle-stable is the XP7-12?At a 30% depth of discharge, the battery achieves over 1,000 charge and discharge cycles. At higher depths of discharge, the service life is reduced accordingly, but remains in the range of several hundred cycles.What are the specific safety features?The battery is equipped with pressure relief valves. Like all VRLA batteries, it may release small amounts of hydrogen. It should therefore not be operated in airtight enclosures and adequate ventilation must be ensured.Which chargers are suitable for the XP7-12?Constant-voltage chargers designed for VRLA AGM batteries are recommended. Correct setting of the charging voltage and temperature compensation is crucial for a long service life.How is the battery installed?The battery can be installed in any position except permanently upside down. Connection is via T1 or T2 plug-in terminals with a tightening torque of 2–3 Nm. 

The XCELL XP7/12F2 impresses as a reliable 12-volt lead-acid battery with 7.2 Ah (20-hour rate) capacity, robust AGM technology and compact dimensions. Equipped with Faston terminals, this battery is ideal for security and emergency power systems, telecommunications and mobile devices. With a service life of up to 10 years in standby mode, it offers a stable power supply with minimal maintenance.Highlights at a glanceRobust capacity: 7.2 Ah at a 20-hour discharge rate for a wide range of applicationsVdS approved: G 116061 for safety-related applicationsLong service life: Up to 10 years standby service life at 20 °CHigh discharge reserves: Maximum discharge currents of up to 108 A for 5 secondsTemperature-resistant: Powerful from -15 °C to +50 °CCompact design: Only 151 x 65 x 100 mm at approx. 2.26 kgStrong performance for demanding applicationsThe XCELL XP7/12F2 is the ideal solution for applications that require a compact design combined with high energy density. Typical areas of application include uninterruptible power supplies (UPS), safety-relevant lighting systems, medical devices, alarm systems and other industrial applications. Thanks to its absorbent glass mat technology, the battery offers reliable performance even during short-term load peaks.Efficient energy for continuous operationThis battery is characterised by a low self-discharge of only around 9 % in 3 months at 25 °C, which means it is quickly ready for use even after longer periods of storage. Its charging characteristics support both standby mode with a recommended voltage of 13.60 to 13.80 V and cyclic use with 14.50 to 14.90 V. With a recommended max. charging current of 2.16 A, the battery remains safe and efficient in operation.Reliable technology for the highest demandsAGM technology ensures leak-proof, maintenance-free operation with an internal gas recovery system. The XCELL XP7/12F2 can be installed in any position (except upside down) and reliably withstands temperatures between -15 °C and +50 °C during discharge operation. Its high cycle resistance and UL and CE certifications underline its suitability for demanding industrial environments.Features  ModelXCELL XP7-12F2 Battery typeVRLA AGM (Standby / General purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, CE, UL  FAQs about the XCELL XP7/12F2 lead-acid batteryHow long is the battery service life?The XCELL XP7/12F2 is designed for a service life of up to 10 years in standby mode at 20 °C.What is the battery particularly suitable for?It is ideal for applications such as UPS systems, emergency lighting, medical devices, telecommunications systems and mobile electronic devices.Can the battery also be used at low temperatures?Yes, the battery works reliably in a discharge temperature range from -15 °C to +50 °C.Does the battery need regular maintenance?No, the battery is maintenance-free thanks to its sealed, valve-regulated AGM design.What charging parameters need to be observed?A charging voltage of 13.60 – 13.80 V is recommended for standby mode, and 14.50 – 14.90 V for cyclic operation. The maximum charging current should not exceed 2.16 A. 

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and a capacity of 12 Ah. With 6.3 mm Faston plug-in terminals, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems, and medical and industrial equipment. Its leak-proof AGM technology ensures a maintenance-free and long-lasting power supply.Highlights at a glanceVdS approved: G 120034 for safety-related applicationsCompact design: Measuring just 151 x 98 x 95 mm and weighing approx. 4.1 kgReliable performance: 12 Ah capacity at a 20-hour discharge rateHigh discharge current: Up to 180 A (5 sec.) for peak loadsLong-lasting: Up to 5 years’ service life at 25 °C in standby modePowerful performance for demanding applicationsThanks to its robust construction and consistent current output, the XP12-12F2 is suitable for a wide range of applications: from safety-critical systems and telecommunications to medical equipment. The Faston connectors (6.3 mm) enable seamless integration into existing setups. Even during short-term load peaks, the battery reliably delivers power with a discharge current of up to 180 A for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float life of up to 5 years (at 25 °C), the battery is characterised by low self-discharge of less than 3% per month, meaning it is ready for immediate use even after prolonged storage. It also impresses with good performance at extreme temperatures ranging from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (in accordance with UL94-HB/UL94-V0) and complies with international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage is 2.25 – 2.30 V/cell (equivalent to 13.5 – 13.8 V) in standby mode and 2.45 – 2.50 V/cell (equivalent to 14.7 – 15.0 V) in cycle mode at an ambient temperature of 25 °C. Automatic temperature compensation of –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby mode?Under ideal conditions (25 °C ambient temperature), the expected service life in standby mode is up to 5 years.Is the battery VdS-certified?Yes, the battery has VdS approval with the number G120034 and is therefore suitable for safety-critical applications.What temperature range is the battery suitable for?The battery is designed for a charging range of –15 °C to +50 °C and a discharging range of –20 °C to +60 °C.What is the self-discharge rate?At 25 °C, the battery’s self-discharge rate is less than 3 % per month. It is recommended that the battery be recharged if it has been stored for longer than six months.What charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cyclic operation, it should be 14.7–15.0 V. The temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cyclic operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard warning systems, as well as for hobby and camping use. However, it is not suitable for starting or traction applications.

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound. 

The XCELL XP3.4-12 is a compact 12-volt AGM lead-acid battery with a rated capacity of 3.4 Ah. It delivers stable performance in safety-critical and industrial applications and can be quickly integrated thanks to T1 flat plug terminals. VdS approval and ISO 9001-certified manufacturing underline its suitability for professional use.Highlights at a glance3.4 Ah during a 20-hour discharge up to 10.5 VVdS approved: G 125002 for safety-related applicationsLow internal resistance of approx. 45 mΩ for reliable current deliverySlim design: 134 x 67 x 66.5 mm, weighing approx. 1.20 kgMaintenance-free thanks to VRLA-AGM and robust ABS casingPerformance for demanding applicationsThe XP3.4-12 ensures a reliable 12 V power supply for fire and burglar alarm systems, emergency and safety lighting, control and regulation technology, as well as measurement and communication devices. Even short-term load peaks are absorbed smoothly.Efficiency and service lifeThe usable capacity is maintained across a wide temperature range: at 40 °C it is 103 per cent, at 25 °C 100 per cent and at 0 °C still 86 per cent. VRLA-AGM technology ensures minimal maintenance and consistent performance throughout the entire service life.Technology and installationT1 flat-pin connectors enable fast, reverse-polarity-protected integration. In standby mode, a charging voltage of 13.5 to 13.8 V at 25 °C is recommended, with temperature compensation of minus 20 mV per °C. In cyclic operation, 14.4 to 15.0 V at 25 °C with minus 30 mV per °C. The initial charging current in cyclic operation should be less than 1.02 A.Properties  ModelXCELL XP3.4-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)3.4 (at 20-hour rate) Maximum discharge current51A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)134 x 67 x 66 Weight (kg)approx. 1.3 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP3.4-12What is the XP3.4-12 battery particularly suitable for?For safety systems such as fire and smoke detection systems, emergency and safety lighting, control systems, communication and measuring equipment, as well as other 12-volt systems with moderate to medium loads.What charging voltages must be observed?In standby mode, the voltage at 25 °C is 13.5 to 13.8 V. In cyclic operation, it is between 14.4 and 15.0 V. Please note the respective temperature compensation.What connections are available on the XP3.4-12?T1 flat plug connectors for quick, reverse-polarity-protected installation in existing cable harnesses.Is the battery maintenance-free?VRLA-AGM technology enables leak-proof, low-gassing and virtually maintenance-free operation.Are there different versions with and without VdS approval?Yes, in addition to the VdS version with the designation G 125002, retailers also offer the standard variant without VdS approval, which should be taken into account when selecting a product.How does temperature affect capacitance?The capacity is temperature-dependent and amounts to approximately 103 per cent at 40 degrees Celsius, 100 per cent at 25 degrees Celsius and 86 per cent of the nominal value at 0 degrees Celsius. 

The XCELL XP65-12 is a high-performance lead-acid battery with a nominal voltage of 12 V and a capacity of 65 Ah (20 h rate), ideal for safety-critical applications and demanding industrial environments. Equipped with M6 inlay terminals and tested to VdS G118049, it impresses with high discharge currents, a long service life and reliable performance, even under difficult environmental conditions.Highlights at a glanceVdS approved: G 118049 for safety-related applicationsHigh capacity: 65 Ah at a 20-hour discharge rate, 37.7 Ah at a 1-hour discharge rateHigh-performance: Discharge current up to 780 A for 5 secondsLong-lasting: Up to 10 years float life at 20 °CMaintenance-free: AGM technology with leak-proof designHigh performance for industrial and safety-critical applicationsThanks to its reliable AGM technology and high current output, the XP65-12 is ideal for fire and burglar alarm systems, emergency power systems, telecommunications, medical technology and many other industrial applications. The M6 terminals ensure a secure connection, even under high load. With its compact dimensions (348 × 167 × 178 mm), it offers high energy density and can be easily integrated into existing systems.High levels of efficiency and service lifeIn float mode, the battery has a service life of up to 10 years at 20 °C. The charging voltage is 13.5–13.8 V in standby mode and 14.4–15.0 V in cyclic operation. The maximum charging current is 19.5 A. Thanks to the temperature-compensated charging curve, safe and efficient energy absorption is guaranteed even with temperature fluctuations. The low self-discharge rate allows for storage periods of up to 6 months without recharging at 25 °C.Technology for maximum reliabilityThe standard ABS housing is robust and can optionally be supplied in a flame-retardant (UL94-V0) version. A low internal resistance of approx. 7.3 mΩ ensures low losses and high system efficiency. The battery retains 86% of its capacity even at 0 °C and 65% at –15 °C. The product complies with international quality standards such as ISO 9001 and CE.Features  ModelXCELL XP65-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)65 (at 20-hour rate) Maximum discharge current650A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)350 x 166 x 174 Weight (kg)approx. 21.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP65-12 lead-acid batteryWhat is the battery’s service life?In standby mode, the battery life is up to 10 years under optimal conditions (20 °C ambient temperature).What applications is the battery suitable for?The XP65-12 is ideal for safety-critical systems, such as fire and burglar alarm systems, UPS systems, medical equipment and industrial energy storage solutions.What temperatures can the battery withstand during use?The battery can be operated within a temperature range of –15 °C to +50 °C. The storage temperature range is –15 °C to +40 °C.What is the self-discharge rate of the XP65-12?At 25 °C, self-discharge is less than 3% per month. A top-up charge is recommended after six months at the latest.What charging parameters should be observed?Standby mode: 13.5 – 13.8 VCycle operation: 14.4 – 15.0 VMax. charging current: 19.5 ATemperature compensation: –20 mV/°C (float), –30 mV/°C (cycle)Are there any guidelines regarding storage and self-discharge?The battery can be stored for up to 6 months at 25 °C; after this, a top-up charge is recommended. 

The Samsung INR18650-25R (often simply called "Samsung 25R") is one of the best-known and most proven high-current batteries on the market. Recognisable by its typical green cover, it is regarded as the "all-rounder" for power-hungry applications. With a capacity of 2500 mAh and an enormous constant discharge current of 20 amps, it bridges the gap between pure high-capacity batteries and extreme high-drain cells. It is the standard choice for power tools, powerful e-cigarettes and bright torches.Highlights at a glanceHigh current load capacity (High Drain): This battery delivers a constant 20 amps without overheating. Short-term (pulse) even up to 100A is possible. This makes it ideal for devices that need "power", such as cordless screwdrivers or sub-ohm vapers.Safe INR chemistry: The lithium nickel manganese cobalt oxide chemistry used (LiNiMnCoO2) is considered more thermally stable and safer than conventional Li-Co cells (ICR), which is vital at high currents.Good balance: With 2500 mAh it offers a solid compromise. It lasts longer than pure power cells (which often only have 1500-2000 mAh), but the voltage does not sag as much under load as cells with 3000+ mAh.Low internal resistance: This keeps the battery relatively cool even under high loads and the voltage remains stable ("low voltage drop"), ensuring consistent performance.Industry standard: As this battery is used millions of times in powertools (e.g. Bosch, Makita battery packs), it is extremely reliable, cycle-resistant and usually very attractively priced.Unprotected construction: It is a Flat-Top cell without protection electronics (PCB). This allows for high current flow, but requires responsible handling and suitable chargers.The favourite for "vapers" and power toolsWhile the Samsung 30B (from your previous enquiry) is a long-distance runner, the 25R is the sprinter. When you pull the trigger of your cordless screwdriver or activate the turbo mode of a torch, high currents flow instantly. A normal battery would immediately collapse here (voltage drop). The 25R delivers the energy effortlessly in such cases. Features ModelSamsung INR18650-25R ApplicationPower tools, e-cigarettes, vacuum cleaners, high-drain lamps Nominal capacity2500 mAh Nominal voltage3.6 V (Standard Li-Ion) End-of-charge voltage4.2 V (compatible with all standard chargers) Max. discharge current**20 A** (constant) / up to 100 A (pulse < 1s) Protection circuit (PCB)No (unprotected / flat top) - be careful when handling! ChemistryLiNiMnCoO2 (INR) - thermally very stable & safe Internal resistanceVery low (< 18 mOhm), therefore ideal for heavy loads Dimensions (Ø x L in mm)18.4 x 65.0 (Standard 18650) Weight (g)approx. 45  FAQs about the Samsung INR18650-25RIs this battery suitable for e-cigarettes?Yes, absolutely. The 25R is one of the most popular batteries among vapers. With 20A continuous load, it is safely suitable for almost all regulated battery mods and many mechanical mods (within reasonable resistance range).What is the difference to the Samsung 30Q?The Samsung 30Q (pink) is the modern successor in spirit.25R (Green): 2500 mAh, gets less hot under extreme loads, very robust.30Q (Pink): 3000 mAh, lasts longer under moderate load. For absolute high-current safety, many still go for the 25R; for longer runtimes, choose the 30Q.Do I need a special charger?No. Unlike the 30B (4.35V), the 25R is a standard battery with 4.2 volt end-of-charge voltage. Any normal Li-ion charger (Nitecore, Xtar, etc.) works perfectly.Can I use it in torches?Yes, for powerful lamps. Many modern LED lamps with over 2000 lumens require such high-drain batteries to reach the turbo mode. Note: As it is a Flat Top (flat positive terminal), it may not work mechanically in some lamps if they require a protruding positive terminal (Button Top). Please check this beforehand.

The XCELL XP45-12 is a robust lead-acid battery with a nominal voltage of 12 volts and a capacity of 45 Ah (20-hour rate). Thanks to maintenance-free AGM technology, M6 inlay terminals and VdS certification (G115059), this battery is ideal for safety-critical and industrial applications. It impresses with its high discharge capacity, long service life and reliable performance even under demanding conditions.Highlights at a glanceVdS approved: G 115059 for safety-related applicationsHigh capacity: 45 Ah at a 20-hour discharge rate, 27.9 Ah at a 1-hour loadHigh discharge currents: Up to 450 A possible for 5 secondsLong-lasting: Up to 12 years of float life at 25 °CMaintenance-free: AGM technology with leak-proof designReliable: Low self-discharge (< 3%/month)Reliable performance for demanding industrial applicationsThe XP45-12 is characterised by its robust construction and high current output, making it the ideal choice for a wide range of demanding applications. These include uninterruptible power supply (UPS) systems, emergency lighting, telecommunications equipment and medical technology, as well as other industrial applications. Thanks to its M6 connectors (T4/T9), a stable and reliable connection is guaranteed. Even during brief peak loads, the battery reliably delivers up to 450 A of current, underlining its high performance and reliability.Energy efficiency and extended lifespanThe batteries offer a float life of up to 12 years at 25 °C, making them ideal for long-term use in stationary systems. The recommended charging voltage is 13.50–13.80 V in standby mode and 14.50–14.90 V in cyclic operation. The maximum charging current is limited to 13.5 A. Thanks to the temperature-compensated charging characteristics, energy efficiency is maintained even under fluctuating environmental conditions.Technology for maximum operational reliabilityThe flame-retardant ABS housing meets UL94-HB/V0 standards and provides reliable cell protection. Certifications to UL, CE, ISO 9001 and VdS confirm the product’s high manufacturing quality and safety. Self-discharge is less than 3% per month, ensuring reliable operational readiness even during prolonged storage periods.Features  ModelXCELL XP45-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)45 (at a 20-hour rate) Maximum discharge current450A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)approx. 14.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP45-12 lead-acid batteryWhat is the battery’s service life?Under optimal environmental conditions (25 °C), the XP45-12 has a service life of up to 12 years in float mode.Is the battery VdS-certified?Yes, the VdS approval with the number G115059 confirms its suitability for safety-critical applications such as fire and burglar alarm systems.What temperature range is the XP45-12 battery designed to withstand?The XP45-12 battery is designed for discharge at –15 °C to +50 °C and charging at –10 °C to +50 °C.What is the self-discharge rate?At 25 °C, self-discharge is less than 3% per month; recharging is recommended after 6 months at the latest.What charging parameters apply?For standby operation: 13.50 – 13.80 V.For cyclic operation: 14.50 – 14.90 V.Temperature compensation: –18 mV/°C (float), –30 mV/°C (cycle).Max. charging current: 13.5 A.What is the cycle life of the XP45-12 battery?The XP45-12 battery can withstand up to 400 charge cycles at a 50% discharge rate. 

This high-quality Beltrona lithium-ion replacement battery has been specially developed for pedelecs with the proven Bosch Classic Line drive system and rack mounting. With its high capacity of 17 Ah, it gives your e-bike a significantly extended range and ensures new, long-lasting riding pleasure. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 17 Ah (612 Wh) for extended tours and a significantly higher range than the original PowerPacks.Precisely fitting replacement: 100% compatible with the Bosch Classic Line drive system (rack version) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can, like the original, simply be inserted into the rack and charged on the bike or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 17 ampere hours enables you to master longer excursions and more demanding routes with inclines without having to worry about the state of charge. Enjoy the freedom of being on the road further and for longer.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion brand cells ensure reliable power delivery. The integrated battery management system (BMS) is the brain of the battery. It permanently monitors each individual cell, protects against harmful influences and ensures an even charge by means of active balancing. This maximises not only safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Classic Line drive and a rack battery. It can be simply swapped for the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the rack (e.g. PowerPack 300, 400). Features  ModelBeltrona E-bike rack battery for Bosch Classic ApplicationE-bike drive System compatibilityBosch Classic Line 36V TechnologyLithium-ion (Li-Ion) Nominal voltage (V)36.0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 360 x 120 x 80 Weight (kg)approx. 3.2  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch Classic charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Classic Line system. You can simply continue to use your existing charging station.How far can I get with this 17Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. Compared to the original PowerPack 400 (approx. 11Ah), however, you will achieve a significantly higher range of up to 50% more with this 17Ah battery.Is this battery also compatible with the Bosch Active/Performance Line systems?No, this battery is exclusively designed for the Bosch Classic Line (mostly model years up to 2013) with rack mounting. It is mechanically and electronically not compatible with the newer Active Line, Performance Line or Performance Line CX systems.What is the best way to store the battery in winter?Store the battery in a cool (10-15°C), dry place and avoid frost. The ideal state of charge for longer storage is about 30% to 60%. It is advisable to check the state of charge every 2-3 months and, if necessary, recharge the battery briefly to prevent deep discharge.

The Beltrona Li-Ion replacement battery for the Panasonic pedelec system is the ideal solution for all e-bike users who require a reliable and high-performance power source. This high-quality lithium-ion battery has been specially developed for the modern Panasonic Deluxe 36V drive system. It offers excellent capacity and longevity, enabling you to cover longer distances without interruption. Thanks to its compact design, it fits seamlessly into your existing pedelec system and allows for easy installation. Enjoy carefree rides with the assurance that you have the energy you need for your adventures.Highlights at a glanceHigh capacity: With 17 Ah (612 Wh) for extended tours and a significantly higher range than many original batteries.Precisely fitting replacement: 100% compatible with the Panasonic Deluxe 36V drive and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be charged on the bike just like the original or removed for charging.More range and cycling enjoyment for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 17 amp hours allows you to undertake longer trips and more demanding routes with inclines without having to worry about the charge level. Enjoy the freedom of being on the road further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It constantly monitors every single cell, protects against harmful influences and ensures an even charge through active balancing. This not only maximises safety, but also increases the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Panasonic Deluxe 36V drive. It is suitable for pedelecs from manufacturers such as:KTMFlyerKettlerReplaces a wide range of original battery types for this system. Properties  ModelBeltrona E-Bike battery for Panasonic Deluxe 36V ApplicationE-bike drive System compatibilityPanasonic Deluxe 36V drive system TechnologyLithium-ion (Li-Ion) Nominal voltage (V)36.0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 350 x 120 x 100 Weight (kg)approx. 3.4  FAQs on the e-bike replacement batteryCan I continue using my original Panasonic charger?Yes, this replacement battery is fully compatible with the original Panasonic charger for the 36V Deluxe system. You can simply continue using your existing charging station.How far can I go with this 17Ah battery?The range depends on many factors, such as the chosen assistance level, terrain, rider weight and tyre pressure. Compared to the original batteries often installed with lower capacity (e.g. 12Ah or 15Ah), you will achieve a significantly greater range with this 17Ah battery.What are the advantages of Li-Ion technology over older batteries?Modern lithium-ion technology offers higher energy density, which means more energy can be stored in a lighter and more compact case. In addition, it does not suffer from the memory effect, so it can always be recharged flexibly, and it has a very low self-discharge when not in use.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge state for longer storage is about 30% to 60%. It is advisable to check the charge level every 2-3 months and to briefly recharge the battery if necessary to prevent deep discharge.

ECELL Li-ion 18650-2600 incl. PCB

This high-quality Beltrona lithium-ion replacement battery has been specially developed for pedelecs with the proven Bosch Classic Line drive system (mostly model years up to 2013) and frame mounting. With its high capacity of 17 Ah, it gives your e-bike a significantly extended range and provides new, long-lasting riding enjoyment. The battery combines cutting-edge cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 17 Ah (612 Wh) for extended tours and a significantly higher range than the original PowerPacks.Precisely fitting replacement: 100% compatible with the Bosch Classic Line drive system (frame battery version) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protective electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be easily attached to the frame like the original and charged on the bike or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 17 ampere hours allows you to handle longer excursions and more demanding routes with inclines without having to worry about the state of charge. Enjoy the freedom to go further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion brand cells provide reliable output. The integrated battery management system (BMS) is the brain of the battery. It continuously monitors every single cell, protects against harmful influences and, through active balancing, ensures an even charge. This not only maximises safety but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and simple replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Classic Line drive and a frame battery. It can be simply replaced with the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the frame (e.g. PowerPack 300, 400). Features  ModelBeltrona e-bike frame battery for Bosch Classic ApplicationE-bike drive System compatibilityBosch Classic Line 36V TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 300 x 80 x 120 Weight (kg)approx. 3.1  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch Classic charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Classic Line system. You can simply continue to use your existing charging station.How far can I get with this 17Ah battery?The range depends on many factors such as the selected support level, terrain, rider weight and tyre pressure. Compared to the original PowerPack 400 (approx. 11Ah), you will achieve a significantly higher range of up to 50% more with this 17Ah battery.Is this battery also compatible with the newer Bosch Active/Performance Line systems?No, this battery is designed exclusively for the Bosch Classic Line (mostly model years up to 2013). It is mechanically and electronically not compatible with the newer Active Line, Performance Line or Performance Line CX systems (from model year 2014).What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. It is advisable to check the charge level every 2-3 months and, if necessary, recharge the battery briefly to avoid deep discharge.

The ECELL Li-Ion 18650-3400 mAh is a premium rechargeable battery that combines maximum energy density with the highest safety standards. Inside the ECELL casing is one of the world's best and most proven lithium-ion cells on the market: the Panasonic NCR18650B. This cell is the industry standard for extreme capacity and longevity.To make this high-performance cell absolutely safe for the end user, ECELL has equipped it with a high-quality electronic protection circuit (PCB - Protection Circuit Board). This invisible safety net at the negative terminal continuously monitors the battery in the background, making it the ideal and worry-free power source for demanding mobile devices.Highlights at a glancePanasonic Premium cell: Inside, the renowned Panasonic NCR18650B operates, known for constant power output and very low self-discharge.Integrated protection circuit (PCB): The intelligent battery management system automatically protects the battery from overcharging (over 4.2V), deep discharge (under 2.5V) and dangerous short circuits.Maximum capacity (3400 mAh): Provides genuine 3400 milliampere-hours, delivering extremely long runtimes even in power-hungry devices.Raised positive terminal (Button Top): The slightly raised positive terminal ensures perfect contact in devices where several batteries have to be inserted one after another (in series).No memory effect: Thanks to modern lithium-ion technology, the battery can be recharged at any time without a long-term loss of capacity.Long service life: Designed for many hundreds of charge and discharge cycles with consistently high energy output.Fields of applicationThe protected ECELL 18650 battery is perfect for devices that require a constant power supply over a long period of time:High-performance LED torches: (e.g. Nitecore, Fenix, Olight) for maximum lighting duration during search and rescue operations.Outdoor and camping equipment: Headlamps, portable lanterns and mobile fans.Measuring devices and sensors: Professional industrial or meteorological instruments.Laser pointers and optical devices: For a stable power supply without sudden drops in performance.Assembly & safety instructionsAttention: Excess length due to PCB! Due to the attached protection circuit and the button top terminal, this battery is approx. 3 to 4 mm longer than an unprotected industrial flat top cell (68.5 mm instead of 65.0 mm). Please check beforehand whether your device's battery compartment can accommodate this length.Charging technology: Use exclusively high-quality chargers that are explicitly approved for lithium-ion batteries with a final charging voltage of 4.2V (CCCV charging method).Temperature: Do not expose the battery to direct heat (do not store or operate above 60°C). Ideally charge Li-Ion batteries at room temperature, never in frost. Features  ModelECELL 18650-3400 Protected (PCB) Built-in cell (Inside)**Panasonic NCR18650B** Technology**Li-Ion** (Lithium-Ion) Nominal voltage**3.6 V - 3.7 V** (final charging voltage: 4.2 V) Nominal capacity**3400 mAh** (High energy density) Energy contentapprox. **12.2 Wh** Max. discharge currentapprox. **6 A - 8 A** (limited by protection circuit) Dimensions (Ø x H)approx. **18.5 mm x 69.0 mm** (Excess length!) Positive terminal design**Button Top** (Raised contact) Protection circuit (PCB)Integrated (Protection against short circuit, overcharging, deep discharge) FAQs for the ECELL 18650-3400 (Panasonic)Is this battery suitable for e-cigarettes or vapers?No, in the vast majority of cases not. The Panasonic NCR18650B cell is designed for maximum endurance (capacity), not for high current. In addition, the protection circuit (PCB) limits the maximum discharge current to approx. 5 to 6 amperes. Modern sub-ohm e-cigarettes, however, often require short-term peak currents of 20A to 30A. The ECELL battery would immediately shut off due to the protection circuit. For e-cigarettes, use special, unprotected high current cells (e.g. Sony Konion VTC5/VTC6).Does the battery fit as a replacement for the battery in my laptop or e-bike?No. In laptop battery packs, e-bike batteries or power tools, unprotected industrial cells (Flat Top) are firmly welded together. The battery management is handled by a central external board for the entire pack. A single, already internally protected cell with Button Top cannot be welded into such packs and would interfere with the external system.Why does it say 3.6V on the battery when my charger charges up to 4.2V?This is completely normal. 3.6 Volt (or 3.7 Volt) is only the nominal voltage, i.e. the average operating voltage over the entire discharge cycle. When the lithium battery is fully charged to 100%, its actual voltage (final charging voltage) is exactly 4.2 Volt. If it falls to approx. 2.5V to 3.0V, it is considered empty.