Varta Longlife Power alkaline battery 4906 / LR6 1.5V (4 pack)

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP Series was developed for high reliability in standby operation and for light cyclic applications. Equipped with maintenance-free AGM technology, this battery offers safe and long-lasting energy supply for a wide range of applications, from security technology to emergency power supply.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting energy supply.Long service life: Designed for a service life of up to 5 years in standby operation at 20°C.Maintenance-free: Leakproof and sealed AGM technology with a gas recombination rate of over 99%.High current capacity: Suitable for devices that require high inrush current for short periods.Flexible installation: Operation is possible in all positions, except permanent upside-down use.Tested quality: Manufactured according to ISO9001 and ISO14001 standards for consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 provides a capacity of 12 Ah at a 20-hour discharge. It is designed as a general-purpose battery and is effective both in standby parallel operation (float) and with occasional cyclical discharges. With a maximum discharge current of 180A for 5 seconds, this battery is also ideally suited for short-term power peaks, as required in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is bound in a glass fibre mat, the CP12120F2 is absolutely maintenance-free and leakproof. This ensures safe operation in sensitive environments. The low self-discharge rate of around 3% per month enables long shelf life with high operational readiness. The robust ABS plastic housing offers excellent protection against mechanical influences.Features  ModelVision CP12120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12120F2 lead-acid batteryFor which applications is the CP12120F2 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (BMA)Emergency lightingMedical devicesTelecommunication systemsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaking.What is the service life of the CP12120F2?The service life in standby operation (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20°C and thus corresponds to the EUROBAT category "Standard Commercial".What is the difference between this battery and a purely cyclic type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A purely cyclic battery is specially designed for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cyclic type would deliver a longer service life.What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 13.5V and 13.8V.Cyclic charge: For occasional cyclic charging a voltage between 14.4V and 15.0V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to avoid impairing service life.What are the temperature ranges and storage conditions?Charging: 0°C to +40°CDischarging: -20°C to +50°CStorage (fully charged): -20°C to +40°CSelf-discharge: about 3% per month at 20°C. For longer storage, it is recommended to recharge the battery every 6 months. 

The VARTA CR123A is a high-performance 3-volt lithium primary battery developed for professional and demanding applications with very high energy requirements. Based on lithium manganese dioxide technology (Li-MnO2), it offers exceptionally high performance, extremely low self-discharge and a very wide operating temperature range. Supplied in a protective individual blister, it is the ideal power source for digital cameras, smart home devices and LED torches.Highlights at a glanceMaximum performance: Developed for high-tech devices with high and fast energy needs (high drain).Extreme longevity: Up to 10 years storage life thanks to extremely low self-discharge.Wide temperature range: Reliable performance under extreme conditions from -20 °C to +70 °C.Versatile application: Ideal for photography, smart home, security technology and outdoor activities.Safe packaging: The protective blister ensures freshness and performance until use.Reliable energy for high-tech applicationsThe VARTA CR123A is the preferred power source for a wide range of devices in which high output and absolute reliability are crucial. Its main field of application is in security technology (motion detectors, alarm systems), in smart home devices, in professional photography (flash units, cameras) and in high-intensity LED torches. Its ability to deliver high currents very quickly guarantees the flawless functioning of all demanding devices.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to this cell’s exceptional performance. It enables a high nominal voltage of 3 volts and is able to supply high currents very quickly, which is essential for devices such as photo flashes. The extremely low self-discharge of less than 1% per year at room temperature guarantees maximum readiness even after many years of storage in “fit and forget” applications such as sensors.Developed for maximum reliabilityThe CR123A is made to the highest quality standards to ensure maximum reliability and leak resistance. This protects your valuable electronic devices from damage. The protective individual blister ensures that the battery retains its full performance until it is used and can be stored safely protected from short circuits and external influences. Features                                                                                                                                                        Model              VARTA Lithium Photo Battery CR123A (Individual Blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3.0               Capacity (mAh)              1480               Diameter (mm)              17.0               Height (mm)              34.5               Weight (g)              17.0        FAQs about the VARTA Lithium Battery CR123AWhat is the main advantage of this lithium battery?The decisive advantage is its ability to deliver very high currents quickly (high drain), combined with extremely long storage capabilities and a wide temperature range. It is the perfect choice for energy-intensive devices that must work for long periods without maintenance.Is this battery rechargeable?No. This is a lithium primary battery. It must not be recharged under any circumstances. Confusion with similarly looking rechargeable lithium-ion batteries (e.g. RCR123A) is dangerous and may result in fire or explosion.Why is it called a "photo battery"?Historically, one of the first main applications for this type of battery was to power analogue and early digital cameras as well as their flash units. Owing to its high output, it is still widely used today in professional photography and for high-performance LED torches.Can I use this instead of two AA batteries?No, the CR123A has a voltage of 3 volts, while two AA batteries in series also deliver 3 volts. However, the form factor is completely different. It is not intended as a direct replacement for AA batteries and only fits devices specifically designed for the CR123A type.How should this battery be disposed of?Batteries must not be disposed of in household waste. Please take the empty battery to the designated collection points in stores or to municipal recycling centres to ensure environmentally sound recycling.

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.

The Saft LS14500 is a high-performance lithium thionyl chloride battery (Li-SOCl2) in the standard AA size, developed for demanding industrial applications with high energy demand. It offers a nominal voltage of 3.6 V and a superior capacity of 2.6 Ah. Thanks to its extremely low self-discharge and robust design, it is the ideal choice for long-life applications that demand maximum reliability and long operating life.Highlights at a GlanceHigh capacity: 2.6 Ah in standard AA size for maximum energy densityPowerful: High and stable operating voltage of 3.6 VExtremely long-lasting: Very low self-discharge of less than 1 % per yearReliable: Excellent response behaviour even after long storageRobust: Hermetically sealed stainless steel case for maximum operational safetyVersatile: Usable in a wide temperature range from -60 °C to +85 °CPowerful for Versatile Industrial ApplicationsThe Saft LS14500 in AA format is the perfect energy solution for a wide variety of professional and industrial devices. Its high energy density makes it the first choice for wireless alarm systems, memory backup systems (memory back up), gas, water or electricity meters (metering), professional electronics as well as tracking systems. Thanks to its ability to deliver stable performance even at low temperatures, it ensures the functionality of your devices under all conditions.Efficiency and Guaranteed SafetyThe proven lithium thionyl chloride technology guarantees reliable energy output over many years. The cell is hermetically sealed with a glass to metal seal to minimise the risk of leakage, and features a non-flammable electrolyte, which significantly increases operational safety. The LS14500 is compliant with the IEC 60086-4 safety standard and is UL certified, underlining its suitability for safety-critical applications.Robust Li-SOCl2 Technology for IndustryLithium thionyl chloride chemistry stands for superior energy density and exceptionally long service life. Compared to other battery technologies, it offers a stable voltage down to the end of the discharge cycle, even after long storage periods. The robust construction reliably protects the cell against corrosion and environmental influences, thus ensuring the functionality of your application throughout the entire product lifetime. Features  ModelSaft LS14500 TechnologyLithium-thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Nominal Voltage (V)3.6 Capacity (mAh)2600 Max. Continuous Discharge Current50 mA Self-dischargeapprox. 1% per year Operating Temperature (°C)-60 ~ +85 Dimensions (Ø x L, mm)approx. 14.5 x 50.3 Weight (g)approx. 16.5 ConnectionStandard (industrial head) RechargeableNo  FAQs on the Saft LS14500 Lithium Cylindrical CellCan I replace a standard 1.5 V AA battery with a Saft LS14500?No, definitely not. The Saft LS14500 has a voltage of 3.6 V, which is more than double that of an ordinary alkaline or lithium AA battery (1.5 V). Using it in a device designed for 1.5 V batteries would immediately and irreparably damage the electronics.Is the Saft LS14500 rechargeable?No, the LS14500 is a lithium primary battery and must not under any circumstances be recharged. Any attempt to do so is dangerous and can lead to destruction of the cell, leakage or explosion.For which applications is the LS14500 particularly well suited?It is ideal for professional applications with low continuous current, which must function reliably for many years. These include, in particular, battery-operated sensors, meters (electricity, gas, water), security technology, memory buffering (memory back up) and GPS trackers.What is the difference to the Saft LS14250?The principal difference is in the size and capacity. The LS14500 is AA size and offers a capacity of 2.6 Ah. The LS14250, on the other hand, is half size (1/2 AA) and consequently has a lower capacity of 1.2 Ah. The choice depends on the energy requirement and available space in the application.How should the LS14500 be correctly disposed of?As a lithium battery it is subject to special disposal regulations. It must be given to appropriate municipal collection points or specialist retailers. Disposal with household waste is not permitted.

The Varta Longlife Power 4903, internationally standardised as LR03 (AAA/Micro), is the powerful all-round battery for professional and industrial applications with high energy requirements. This powerful alkaline battery has been specially developed for devices that require a high and often fluctuating power output. The practical 4-pack foil packaging is optimised for professional use and makes handling and stocking easier in a commercial environment.Highlights at a glancePowerful energy: Developed for devices with high and fluctuating energy requirements.Professional reliability: Guarantees constant and long-lasting performance for commercially used devices.Optimised packaging: The 4-pack foil packaging is ideal for easy packaging and service requirements.Long shelf life: With a shelf life of 10 years, perfect for stockpiling with minimal self-discharge.Guaranteed quality: Proven Varta product performance, manufactured in Germany.Powerful in professional applicationsThe Varta Longlife Power LR03 is the ideal choice for a wide range of professional devices that require more than just standard power. It is used in medical technology (e.g. blood pressure monitors), in security technology (keyboards for alarm systems, mobile sensors) and in office and IT environments (wireless mice, keyboards, dictation machines). Their ability to deliver high power peaks ensures the reliable operation of sophisticated electronics.Reliable and powerful alkaline technologyThe proven alkaline-manganese technology (Zn/MnO2) of the Longlife Power series is designed for high power output. It offers superior performance in energy-intensive devices compared to standard alkaline batteries. The high-quality workmanship "Made in Germany" also ensures maximum leakage safety and thus protects your valuable professional equipment.Efficiency for professional useThe Varta Longlife Power series in foil packaging is consistently geared towards the needs of professional users. Delivery in foil-wrapped 4-packs facilitates stock-keeping and needs-based distribution to service technicians or for equipping workstations. The guaranteed Varta quality and long shelf life offer maximum planning and supply security for your company. Battery features                                                                                                                                                        Model              Varta Longlife Power 4903 / AAA               Battery type              Alkaline manganese               Rated voltage (V)              1.5               Capacity (mAh)              approx. 1300               Diameter (mm)              10.5               Height (mm)              44.5               Weight (g)              11.5        FAQs about the Varta Longlife Power LR03 batteryWhat is the difference between "Longlife Power" and "Industrial Pro"?Both lines are aimed at professional users. "Longlife Power" (formerly High Energy) is designed as a powerful all-rounder for devices with high, often fluctuating energy requirements (e.g. measuring devices, wireless mice). "Industrial Pro" is designed for maximum reliability and constant power output for OEM applications and safety-relevant devices (e.g. smoke detectors, long-term sensors).What are the advantages of the 4-pack foil packaging?The film packaging (shrink-wrap) combines four batteries into one compact and robust unit. This is ideal for adding to new devices (OEM), for equipping service kits or for quick and easy distribution to employees without having to handle loose batteries.Is this battery suitable for original equipment (OEM)?Yes, their high quality and long shelf life make them a very good choice for the initial equipment of devices that require a powerful energy source. The "Industrial Pro" series is a possible alternative for applications where guaranteed long-term stability is a priority.Can I also use these batteries in devices with low power requirements?Yes, this is possible. However, for devices with very low and constant energy requirements (e.g. remote controls, wall clocks), the batteries in the "Varta Longlife" series are the most economical choice, as they are optimised for maximum service life with low load.How should this battery be disposed of?Batteries must not be disposed of with household waste. Please dispose of used batteries at the designated collection points in shops or at municipal recycling centres to ensure environmentally friendly recycling.

The Vision CP1223 is a high-quality, valve-regulated lead acid battery (VRLA) with 12 volt nominal voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable energy provision for a wide variety of applications, particularly in security and medical technology.Highlights at a glanceCompact energy: 2.3 Ah capacity at 12 V for reliable energy provision in restricted spaces.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Offers a stable voltage position and low self-discharge.Flexible installation: Operation is possible in all positions except permanent upside-down use.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1223 delivers a nominal capacity of 2.3 Ah with a 20 hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its area of application ranges from alarm systems and UPS systems to mobile medical devices where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1223 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables long storage life with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features  ModelVision CP1223 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (maintenance charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1223 lead-acid batteryFor which applications is the CP1223 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to refill with distilled water and it is protected against leaks.What is the service life of the CP1223?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A in order to maximise the battery’s service life.What does the Faston 187 connector mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free installation.