Yuasa batteries - NP7/12L made in Taiwan

The Yuasa NP4-12 is a compact and reliable VRLA lead-acid battery with a nominal voltage of 12 volts and a capacity of 4 Ah. Thanks to its maintenance-free technology, flexible installation options and robust design, the battery is ideal for emergency power systems, safety-related applications and industrial electronics.Highlights at a glanceReliable performance: 4 Ah capacity at 12 V (20h rate), 3.7 Ah at 10h rate.Compact format: Only 90 × 70 × 106 mm – ideal for confined installation spaces.Flexible installation: Can be operated in almost any position, except permanently upside down.Safe operation: With self-closing low-pressure vent valves.Maintenance-free: Valve-regulated VRLA technology – no topping up necessary.Long service life: EUROBAT classification “Standard Commercial” (3 to 5 years).Compact energy source for a wide range of applicationsWith a capacity of 4 Ah at 20-hour discharge (up to 1.75 V/cell), the NP4-12 supplies constant energy even in tight spaces. For 10-hour discharge up to 1.8 V/cell, it delivers 3.7 Ah. The battery is ideal for systems with moderate current requirements and short-term load peaks of up to 120 A for one second.Robust technology with ISO-certified qualityThe NP4-12 is impressive with a long service life of up to 5 years at 20 °C and is ISO 9001 certified. Its low self-discharge rate of around 3 % per month ensures reliable operational readiness, even after prolonged storage. The casing is made of robust ABS plastic (UL94:HB) and is optionally available in a flame-retardant version (UL94:V0). With an impedance of 40 mΩ (at 1 kHz), the battery offers solid performance and safety in operation.Easy handling and safe operationThe NP4-12 is equipped with Faston plug-in terminals (4.75 mm) and can be quickly and easily integrated into existing systems. Installation is possible in any position, except for permanently upside-down mounting. Each cell has a low-pressure vent valve for controlled gas pressure regulation. The maximum charging current in cyclic use is 1 A. There is no limit for the float charge. The recommended charging voltage is:13.65 V (±1 %) in float operation14.5 V (±3 %) in cyclic useFeatures ModelYuasa NP4-12 Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)4 (at 20h rate) Maximum discharge current40A (for 5 seconds) Charging voltage (float)13.65V (±1%) Charging voltage (cyclic)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)90 x 70 x 101 Weight (kg)1.7 ConnectionFaston 4.8mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa NP4-12 lead-acid batteryFor which applications is the NP4-12 battery suitable?The battery is suitable for:Security and alarm systemsUPS and emergency power systemsMedical devicesControl and measurement technologyLighting systemsWhat safety functions does the NP4-12 provide?It has self-closing low-pressure vent valves for safe pressure regulation and a robust casing – optionally in a flame-retardant design.How high is the self-discharge?The self-discharge is about 3 % per month at 20 °C, which enables reliable operation even after prolonged storage.What capacity and energy does it really deliver?Nominal capacity: 4 Ah at 20-hour discharge (20 HR)10-hour rate (higher current): approx. 3.7 Ah at 1.8 V/cell and 20 °CEnergy content corresponds to approx. 48 Wh (12 V × 4 Ah) or about 44 Wh at 10-HR dischargeHow long does the battery last in standby or cyclic operation?In float/standby operation: design life of 3–5 years according to EUROBAT standardIn cyclic operation: over 1,000 cycles possible, depending on depth of discharge and ambient temperatureHow should the NP 4-12 be charged correctly (float vs. cycle)?Float charge voltage (20 °C): approx. 13.65 V block (2.275 V/cell), temperature compensation −3 mV/cell/°CCyclic or boost charge: approx. 14.5 V block (2.42 V/cell), temperature compensation −4 mV/cell/°CFor cyclic use: maximum charging current 1 A (~0.25 C) 

Yuasa e NP2.3-12 is a maintenance-free VRLA industrial battery with VdS approval. It offers impressive compact dimensions, reliable power output and a service life of up to 5 years. Ideal when you require a stable 12-volt supply in security and emergency power applications where space is limited.Highlights at a glanceReliable capacity: 2.3 Ah during a 20-hour discharge to 10.5 V at 20 °C.VdS approved: G 101139 for safety-related applicationsCompact and lightweight: 178 x 34 x 64 mm, weighing 0.95 kg.Flexible installation: Operation in any position except permanently upside down.Low self-discharge: Approximately 3 per cent per month at 20 °C.Particularly safe: Low-pressure relief valves, UL-approved materials.Easy installation: FASTON plug connection 4.7 mm.Maximum performance for compact applicationsDespite its compact size, the NP2.3-12 delivers high charging currents for short periods. Up to 69 A for 1 second and 23 A for 1 minute are possible. The measured internal resistance is 90 mΩ at 1 kHz. This makes the battery particularly suitable for fire and burglar alarm systems, emergency and safety lighting, control systems, measuring instruments, and small UPS and buffer applications.Efficiency meets long service lifeThe EUROBAT classification as Standard Commercial indicates a typical service life of 3 to 5 years at 20 °C. The low self-discharge rate supports long storage times. The housing is made of ABS to UL94 HB as standard; a flame-retardant FR version to UL94 V0 is available as an option. Valve-regulated recombination and low-maintenance operation ensure a high level of operational reliability.Technology for flexible applicationsThe battery can be operated in almost any position, except permanently upside down. The operating temperature range for charging and discharging is from minus 20 °C to plus 60 °C. For float charging, 13.65 V ±1 per cent is specified, with temperature compensation of minus 3 mV per cell per degree Celsius. For fast charging, the voltage is 14.50 V ±3 per cent, with a compensation of minus 4 mV per cell per degree Celsius.  No current limitation is required for float charging; for high-current charging, 0.575 A is recommended. Adequate ventilation must be ensured, as hydrogen may be produced in VRLA batteries.Electrical connection is via FASTON 4.7 mm plug-in terminals. The compact design facilitates installation in narrow enclosures and racks.Features  ModelYuasa NP2.3-12 VdS Battery typeVRLA AGM (cycle-resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20-hour rate) Maximum discharge current23A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)1 ConnectionFlat plug CertificationsIEC 60896-21+22, UL, VdS  FAQs on the Yuasa NP lead-acid batteryWhat applications is the battery suitable for?Preferred areas of application include VdS-compliant fire and burglar alarm systems, emergency and safety lighting, control and signalling systems, measuring instruments, small UPS units and buffer applications.How is the battery installed?Installation is possible in any position, except permanently upside down. Electrical connection is via 4.7 mm FASTON plug-in terminals. Please ensure correct polarity and adequate ventilation.What charging voltage is recommended?For float charging: 13.65 V ±1 per cent at 20 °C, temperature compensation minus 3 mV per cell per °C. For high-power charging: 14.50 V ±3 per cent at 20 °C with compensation of minus 4 mV per cell per °C.No current limitation is necessary for float charging; for bulk charging, 0.575 A.Are there any special safety instructions?Each cell has a low-pressure valve for controlled venting. Do not operate batteries in gas-tight enclosures. Dispose of at the end of their service life in accordance with local regulations.Ask ChatGPTIs the battery suitable for series and parallel connections?In principle, yes, provided the installation is carried out in accordance with the Yuasa guidelines. Ensure identical cable lengths per string, suitable fuses, the correct polarity sequence and adequate ventilation. For multiple strings, follow the instructions for multi-string connections. Which chargers are suitable?Constant-voltage chargers for VRLA-AGM batteries, which are set to the voltages specified in the data sheet and take temperature compensation into account. 

The OPTIMA BlueTop BT DC 4.2 is a revolutionary high-performance AGM battery that, thanks to the patented SPIRALCELL TECHNOLOGY®, offers exceptional performance as both a starter and deep-cycle supply battery. With a nominal voltage of 12 V, a capacity of 55 Ah and enormous starting power, it is the ultimate solution for demanding marine and leisure vehicles. Its extreme vibration resistance and fully maintenance-free, leak-proof construction make it the most reliable choice for anyone who needs maximum performance and operational safety both on the water and on the road.Highlights at a glanceSPIRALCELL TECHNOLOGY®: Unique spiral cell construction for extreme vibration resistance and longer service life.Dual-purpose functionality: Outstanding performance as a starter battery for the engine and as a cycle-proof supply battery for the on-board electronics.Extreme vibration resistance: Up to 15 times more vibration resistant than conventional batteries, ideal for tough use on the water.Absolutely maintenance-free and leak-proof: The sealed AGM construction allows installation in almost any position.High charging efficiency: Charges back up significantly faster than conventional lead-acid batteries.Maximum performance for marine and leisure vehiclesThe OPTIMA BlueTop BT DC 4.2 has been developed specifically for the extreme demands in marine and motorhome applications. It delivers the massive power needed to start boat engines and at the same time reliably and long-lastingly supplies energy-hungry consumers such as trolling motors, sound systems, navigation devices and the galley. Its ability to withstand hundreds of charge and discharge cycles makes it the perfect all-in-one solution for a long and carefree day on the water or on holiday.Superior SPIRALCELL TECHNOLOGY®At the heart of every OPTIMA battery is the unique SPIRALCELL TECHNOLOGY®. Instead of flat lead plates, high-purity lead spirals are used, which are wrapped with a glass-fibre mat (AGM). This compact and extremely stable design minimises the plate gap, maximises the active surface area and reduces internal resistance. The result is an unrivalled starting performance, extreme vibration resistance, longer service life and faster rechargeability.Built for the most demanding conditionsThe OPTIMA BlueTop is designed for tough use. Its sealed construction not only prevents acid leakage but also evaporation, making it completely maintenance-free. The robust construction and extreme vibration resistance ensure that waves, vibrations and shocks cannot harm the battery. Thanks to its low self-discharge, it is also the ideal choice for seasonal use. Features  ModelOPTIMA BlueTop BT DC 4.2 TechnologyAGM Spiralcell Nominal voltage (V)12 Capacity (Ah)55 Cold start current EN (A)765 Dimensions (L x W x H in mm)254 x 175 x 200 ConnectionDual connection (SAE autopole & threaded stud) Weight (kg)approx. 19.9  FAQs about the OPTIMA BlueTop batteryWhat is the main advantage of SPIRALCELL TECHNOLOGY®?The spiral cell technology provides an extremely robust and vibration-resistant internal structure, a very low internal resistance for high starting currents and a longer service life compared to traditional batteries with flat plates. It combines the benefits of a starter battery with those of a deep-cycle battery.What is the difference between OPTIMA BlueTop, YellowTop and RedTop?BlueTop: Specialist for marine and leisure vehicles, often with additional threaded connections. Available as a pure starter battery (dark grey housing) and as a dual-purpose battery (light grey housing) like this model. YellowTop: A pure dual-purpose battery for land vehicles with high energy requirements (e.g. off-road vehicles with winch, large hi-fi systems). RedTop: A pure high-performance starter battery for maximum starting power.Which charger do I need for this AGM battery?For AGM batteries, and especially for OPTIMA batteries, a modern, microprocessor-controlled charger is recommended which has a special charging profile for AGM batteries. This ensures complete and gentle charging and maximises the service life.Can I install the battery in any position?Yes, thanks to the sealed AGM spiral cell construction, the battery is leak-proof and can be mounted in almost any position, offering additional flexibility when installing in tight spaces on boats or motorhomes.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge at any retailer selling new batteries or at municipal recycling centres to ensure proper disposal.