36V/37V

The Beltrona Li-Ion replacement battery for the Panasonic pedelec system is the ideal solution for all e-bike users who require a reliable and high-performance power source. This high-quality lithium-ion battery has been specially developed for the modern Panasonic Deluxe 36V drive system. It offers excellent capacity and longevity, enabling you to cover longer distances without interruption. Thanks to its compact design, it fits seamlessly into your existing pedelec system and allows for easy installation. Enjoy carefree rides with the assurance that you have the energy you need for your adventures.Highlights at a glanceHigh capacity: With 17 Ah (612 Wh) for extended tours and a significantly higher range than many original batteries.Precisely fitting replacement: 100% compatible with the Panasonic Deluxe 36V drive and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be charged on the bike just like the original or removed for charging.More range and cycling enjoyment for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 17 amp hours allows you to undertake longer trips and more demanding routes with inclines without having to worry about the charge level. Enjoy the freedom of being on the road further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It constantly monitors every single cell, protects against harmful influences and ensures an even charge through active balancing. This not only maximises safety, but also increases the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Panasonic Deluxe 36V drive. It is suitable for pedelecs from manufacturers such as:KTMFlyerKettlerReplaces a wide range of original battery types for this system. Properties  ModelBeltrona E-Bike battery for Panasonic Deluxe 36V ApplicationE-bike drive System compatibilityPanasonic Deluxe 36V drive system TechnologyLithium-ion (Li-Ion) Nominal voltage (V)36.0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 350 x 120 x 100 Weight (kg)approx. 3.4  FAQs on the e-bike replacement batteryCan I continue using my original Panasonic charger?Yes, this replacement battery is fully compatible with the original Panasonic charger for the 36V Deluxe system. You can simply continue using your existing charging station.How far can I go with this 17Ah battery?The range depends on many factors, such as the chosen assistance level, terrain, rider weight and tyre pressure. Compared to the original batteries often installed with lower capacity (e.g. 12Ah or 15Ah), you will achieve a significantly greater range with this 17Ah battery.What are the advantages of Li-Ion technology over older batteries?Modern lithium-ion technology offers higher energy density, which means more energy can be stored in a lighter and more compact case. In addition, it does not suffer from the memory effect, so it can always be recharged flexibly, and it has a very low self-discharge when not in use.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge state for longer storage is about 30% to 60%. It is advisable to check the charge level every 2-3 months and to briefly recharge the battery if necessary to prevent deep discharge.

This high-quality Beltrona lithium-ion replacement battery has been specially developed for pedelecs with the proven Bosch Classic Line drive system (mostly model years up to 2013) and frame mounting. With its high capacity of 17 Ah, it gives your e-bike a significantly extended range and provides new, long-lasting riding enjoyment. The battery combines cutting-edge cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 17 Ah (612 Wh) for extended tours and a significantly higher range than the original PowerPacks.Precisely fitting replacement: 100% compatible with the Bosch Classic Line drive system (frame battery version) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protective electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be easily attached to the frame like the original and charged on the bike or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 17 ampere hours allows you to handle longer excursions and more demanding routes with inclines without having to worry about the state of charge. Enjoy the freedom to go further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion brand cells provide reliable output. The integrated battery management system (BMS) is the brain of the battery. It continuously monitors every single cell, protects against harmful influences and, through active balancing, ensures an even charge. This not only maximises safety but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and simple replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Classic Line drive and a frame battery. It can be simply replaced with the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the frame (e.g. PowerPack 300, 400). Features  ModelBeltrona e-bike frame battery for Bosch Classic ApplicationE-bike drive System compatibilityBosch Classic Line 36V TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 300 x 80 x 120 Weight (kg)approx. 3.1  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch Classic charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Classic Line system. You can simply continue to use your existing charging station.How far can I get with this 17Ah battery?The range depends on many factors such as the selected support level, terrain, rider weight and tyre pressure. Compared to the original PowerPack 400 (approx. 11Ah), you will achieve a significantly higher range of up to 50% more with this 17Ah battery.Is this battery also compatible with the newer Bosch Active/Performance Line systems?No, this battery is designed exclusively for the Bosch Classic Line (mostly model years up to 2013). It is mechanically and electronically not compatible with the newer Active Line, Performance Line or Performance Line CX systems (from model year 2014).What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. It is advisable to check the charge level every 2-3 months and, if necessary, recharge the battery briefly to avoid deep discharge.

This high-quality Beltrona lithium-ion replacement battery has been specially developed for pedelecs with the proven Bosch Classic Line drive system and rack mounting. With its high capacity of 17 Ah, it gives your e-bike a significantly extended range and ensures new, long-lasting riding pleasure. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 17 Ah (612 Wh) for extended tours and a significantly higher range than the original PowerPacks.Precisely fitting replacement: 100% compatible with the Bosch Classic Line drive system (rack version) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can, like the original, simply be inserted into the rack and charged on the bike or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 17 ampere hours enables you to master longer excursions and more demanding routes with inclines without having to worry about the state of charge. Enjoy the freedom of being on the road further and for longer.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion brand cells ensure reliable power delivery. The integrated battery management system (BMS) is the brain of the battery. It permanently monitors each individual cell, protects against harmful influences and ensures an even charge by means of active balancing. This maximises not only safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Classic Line drive and a rack battery. It can be simply swapped for the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the rack (e.g. PowerPack 300, 400). Features  ModelBeltrona E-bike rack battery for Bosch Classic ApplicationE-bike drive System compatibilityBosch Classic Line 36V TechnologyLithium-ion (Li-Ion) Nominal voltage (V)36.0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 360 x 120 x 80 Weight (kg)approx. 3.2  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch Classic charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Classic Line system. You can simply continue to use your existing charging station.How far can I get with this 17Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. Compared to the original PowerPack 400 (approx. 11Ah), however, you will achieve a significantly higher range of up to 50% more with this 17Ah battery.Is this battery also compatible with the Bosch Active/Performance Line systems?No, this battery is exclusively designed for the Bosch Classic Line (mostly model years up to 2013) with rack mounting. It is mechanically and electronically not compatible with the newer Active Line, Performance Line or Performance Line CX systems.What is the best way to store the battery in winter?Store the battery in a cool (10-15°C), dry place and avoid frost. The ideal state of charge for longer storage is about 30% to 60%. It is advisable to check the state of charge every 2-3 months and, if necessary, recharge the battery briefly to prevent deep discharge.

This high-quality Beltrona lithium-ion replacement battery was specially developed for pedelecs with the widely used Yamaha 36V drive systems (PW, PW-ST, PW-SE, PW-TE, PW-CE). With its enormous capacity of 20.7 Ah, it gives your e-bike an outstanding, greatly extended range and ensures ultimate, long-lasting riding enjoyment. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a precisely fitting housing for frame mounting to ensure maximum performance, safety and compatibility.Highlights at a glanceEnormous capacity: With 20.7 Ah (745 Wh) for extremely long tours and the greatest possible range.Precisely fitting replacement: 100% compatible with the Yamaha 36V PW system (frame battery version) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protective electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can, like the original, easily be charged on the bike or removed for charging.Maximum range and riding pleasure for your pedelecGive your e-bike a second life and surpass all previous range limits. This replacement battery is the ideal choice for drastically increasing the range of your pedelec or replacing an ageing original battery. The enormous capacity of 20.7 ampere-hours allows you to manage day trips and even the most demanding routes with many climbs without worrying about the charge level. Enjoy the ultimate freedom on two wheels.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion branded cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It continuously monitors every single cell, protects against harmful influences and ensures uniform charging through active balancing. This not only maximises safety but also the lifespan and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Yamaha 36V PW drive and a frame battery. It can be easily replaced for the existing battery and charged using your original Yamaha charger.It is, among others, suitable for pedelecs from manufacturers such as:Haibike (Sduro series)WinoraGhostLapierreBH BikesReplaces a variety of original battery types with 400Wh and 500Wh. Features  ModelBeltrona E-Bike frame battery for Yamaha 36V ApplicationE-bike drive System compatibilityYamaha PW / ST / TE / CE 36V TechnologyLithium-ion (Li-Ion) Nominal voltage (V)36.0 Capacity (Ah)20.7 Energy (Wh)745 Dimensions (L x W x H in mm)approx. 372 x 98 x 98 Weight (kg)  FAQs about the e-bike replacement batteryCan I continue to use my original Yamaha charger?Yes, this replacement battery is fully compatible with the original Yamaha charger for the 36V system. Please note that, due to the very high capacity, the charging time is correspondingly longer than with a battery of lower capacity.How far can I get with this 20.7Ah battery?The range depends on many factors, such as the selected support level, the terrain, rider weight and tyre pressure. Compared to the original batteries with 400Wh (approx. 11Ah) or 500Wh (approx. 13.8Ah), however, you will achieve a significantly higher range of up to 50% and more with this 745Wh battery.What are the advantages of Li-Ion technology compared to older batteries?Modern lithium-ion technology provides higher energy density, which means more energy can be stored in a lighter, more compact housing. In addition, it does not suffer from a memory effect, so it can be recharged flexibly at any time, and has very low self-discharge when not in use.How should I store the battery in winter?Store the battery in a cool (10-15°C), dry place and avoid frost. The ideal state of charge for longer storage is about 30% to 60%. It is advisable to check the state of charge every 2-3 months and briefly recharge the battery if necessary to avoid deep discharge.

The BOSCH drive system is one of the best-selling in the world. Technology: LiIon Voltage: 36 V Battery capacity: 11.6 Ah Suitable for Cannondale, Centurion, Conway, Corratec, Cube, Diamant, Felt, Focus, Ghost Giant, Haibike, Kalkhoff, Kettler, KTM, Kreidler, Merida, Raleight, Rotwild, Scott, Trel Victoria, Univeg, VSF ect, Highlights & Details Battery management Cell balancer Protection against overcharging and deep discharge Features BMS (battery management) Cell balancer Protection against overcharging and deep discharge Short-circuit proof Temperature monitor Sleep mode Status display with 5 LEDs Can be charged with charger Scope of delivery Battery pack

This high-quality Beltrona lithium-ion replacement battery has been specially developed for pedelecs with the modern Panasonic Next Generation (NEX-T) 36V drive system. With its high capacity of 19 Ah, it gives your e-bike a significantly extended range and ensures long-lasting riding enjoyment. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 19 Ah (684 Wh) for extended tours and a significantly greater range than the original batteries.Precisely fitting replacement: 100% compatible with the Panasonic Next Generation drive and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protective electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be easily charged on the bike like the original or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice to significantly increase the range of your pedelec or to replace an ageing original battery. The high capacity of 19 ampere hours allows you to tackle longer excursions and more demanding routes with inclines without having to worry about the charge status. Enjoy the freedom of being able to travel further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion brand cells ensure reliable performance. The integrated battery management system (BMS) is the brain of the battery. It permanently monitors each individual cell, protects against harmful influences and ensures even charging through active balancing. This maximises not only safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Panasonic Next Generation 36V drive. It can simply be swapped for the existing battery and charged using your original Panasonic charger.It is suitable, among others, for pedelecs from manufacturers such as:KTMFlyerKettlerReplaces a wide variety of original battery types for this system. Features  ModelBeltrona E-bike battery for Panasonic Next Gen 36V ApplicationE-bike drive System compatibilityPanasonic Next Gen 36V drive system TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)19 Energy (Wh)684 Dimensions (L x W x H in mm)approx. 350 x 120 x 100 Weight (kg)approx. 3.6  FAQs about the e-bike replacement batteryCan I continue to use my original Panasonic charger?Yes, this replacement battery is fully compatible with the original Panasonic charger for the 36V Next Generation system. You can simply continue to use your existing charging station.How far can I go with this 19Ah battery?The range depends on many factors, such as the selected assistance level, the terrain, the rider's weight and the tyre pressure. However, compared to the original batteries often installed with lower capacity (e.g. 12Ah or 15Ah), you will achieve a significantly greater range with this 19Ah battery.What are the advantages of Li-Ion technology compared to older batteries?Modern lithium-ion technology offers a higher energy density, which means that more energy can be stored in a lighter and more compact housing. In addition, it does not suffer from the memory effect, i.e. it can be recharged flexibly at any time, and has a very low self-discharge rate when not in use.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge status for longer storage is around 30% to 60%. It is recommended to check the charge status every 2-3 months and briefly recharge the battery if necessary to avoid deep discharge.

This high-quality Beltrona lithium-ion replacement battery is designed as a custom-fit PowerPack for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and vertical Intube battery (Powertube). With its high capacity of 17 Ah, it gives your e-bike a significantly extended range. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a robust housing to ensure maximum performance, safety and seamless integration into your bike frame.Highlights at a glanceHigh capacity: With 17 Ah (approx. 612 Wh) for long and demanding tours, significantly more than the original Powertube 500.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for vertical Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Splashproof and dustproof: Robust construction for reliable function in all weathers.Long-lasting energy, perfectly integratedGive your e-bike new stamina. This Intube battery is the ideal choice to replace an ageing original battery or to get a second battery with more capacity. It fits seamlessly into the down tube of your e-bike, preserving its sleek and integrated look. The high capacity ensures that you don't come to a standstill halfway along the route, even on demanding routes or at high assistance levels.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and permanently protects the battery. It monitors each individual cell, protects against harmful influences and ensures an even charge through active balancing. This not only maximises safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona PowerPack is designed as a direct replacement for the vertically installed Bosch Powertube batteries (e.g. Powertube 400, 500, 625). It can be easily replaced with the existing battery and charged with your original Bosch charger. Features  ModelBeltrona E-bike Intube battery for Bosch (vertical) ApplicationE-bike drive (in-tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-ion (Li-Ion) Rated voltage (V)36,0 Capacity (Ah)17 Energy (Wh)612 Dimensions (L x W x H in mm)approx. 355 x 85 x 65 Weight (kg)approx. 3.4  FAQs about the e-bike replacement batteryHow can I tell whether I need the vertical or horizontal version?This depends on the construction of your bike frame. With the vertical version, the battery is inserted into the down tube from above or below. With the horizontal version, it is removed or inserted from the side of the down tube. Please compare the installation direction with your current battery.Can I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can simply continue to use your existing charging station.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with Intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. We recommend checking the charge level every 2-3 months and recharging the battery briefly if necessary to avoid deep discharge.

This high-quality Beltrona lithium-ion replacement battery is designed as a custom-fit PowerPack for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and vertical Intube battery (Powertube). With its high capacity of 17.5 Ah (630 Wh), it gives your e-bike a significantly extended range. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a robust housing to ensure maximum performance, safety and seamless integration into your bike frame.Highlights at a glanceHigh capacity: With 17.5 Ah (630 Wh) for long and demanding tours, comparable to the original Powertube 625.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for vertical Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Splashproof and dustproof: Robust construction for reliable function in all weathers.Long-lasting energy, perfectly integratedGive your e-bike new stamina. This Intube battery is the ideal choice to replace an aging original battery or to get a second battery with more capacity. It fits seamlessly into the down tube of your e-bike, preserving its sleek and integrated look. The high capacity ensures that you won't be left stranded halfway, even on demanding routes or at high levels of assistance.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and protects the battery at all times. It monitors every single cell, protects against harmful influences and, through active balancing, ensures an even charge. This not only maximises safety, but also the service life and the efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona PowerPack is designed as a direct replacement for the vertically installed Bosch Powertube batteries (e.g., Powertube 400, 500, 625). It can be easily exchanged for the existing battery and charged with your original Bosch charger Features ModelReplacement Intube battery for Bosch (vertical) ApplicationE-bike drive (in-tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)17.5 Energy (Wh)630 Dimensions (L x W x H in mm)approx. 355 x 85 x 65 Weight (kg)approx. 3.5  FAQs about the e-bike replacement batteryHow can I tell whether I need the vertical or horizontal version?This depends on the construction of your bike frame. For the vertical version, the battery is inserted into the down tube from above or below. For the horizontal version, it is inserted or removed from the side of the down tube. Please compare the installation direction with your current battery.Can I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can continue to use your existing charging station.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with Intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool (10–15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. It is advisable to check the charge level every 2–3 months and briefly recharge if necessary to avoid deep discharge.

This high-quality E-Bike Vision PowerPack is designed as a precisely fitting replacement or second battery for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and vertical Intube battery (Powertube). With a capacity of 12.8 Ah, this battery offers excellent range for long tours. The battery combines cutting-edge cell technology with an intelligent battery management system (BMS) and a robust housing to guarantee maximum performance, safety, and seamless integration into your bike frame.Highlights at a glanceHigh capacity: With 12.8 Ah (approx. 461 Wh) for long and demanding tours.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for vertical Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect, and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating, and short circuit.Splashproof and dustproof: Rugged construction for reliable function in all weather conditions.Long-lasting energy, perfectly integratedGive your e-bike new endurance. This Intube battery is the ideal choice for replacing an aging original battery or acquiring a second battery for especially long tours. It integrates seamlessly into the down tube of your e-bike, thus preserving its slim, integrated appearance. The high capacity ensures you will not be stranded halfway, even on demanding routes or at a high support level.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion brand cells ensure reliable performance. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and continuously protects the battery. It monitors every single cell, shields against harmful influences and, via active balancing, delivers uniform charging. This not only maximizes safety, but also the life span and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis E-Bike Vision PowerPack is designed as a direct replacement for vertically mounted Bosch Powertube batteries (e.g. Powertube 400, 500). It can simply be swapped for the existing battery and charged using your original Bosch charger. Features  ModelE-Bike Vision PowerPack Intube (Vertical) ApplicationE-bike drive (in-tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)12.8 Energy (Wh)461 Dimensions (L x W x H in mm)approx. 355 x 85 x 65 Weight (kg)approx. 2.9  FAQs about the E-Bike replacement batteryHow can I tell whether I need the vertical or horizontal version?This depends on the construction of your bike frame. With the vertical version, the battery is inserted into the down tube from above or below. With the horizontal version, it is inserted from the side into the down tube. Please compare the installation direction with your current battery.Can I continue using my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can simply continue using your existing charging station.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with Intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. It is recommended to check the charge level every 2-3 months and, if necessary, briefly recharge the battery to avoid deep discharge.

This high-quality Beltrona lithium-ion replacement battery was specially developed for pedelecs with the widely used Bosch Active Line, Performance Line and Performance Line CX drive systems (from model year 2014) with rack mounting. With its enormous capacity of 20 Ah, it gives your e-bike an outstanding, greatly extended range and ensures ultimate, long-lasting riding enjoyment. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceEnormous capacity: With 20 Ah (720 Wh) for extremely long tours and one of the greatest ranges available.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance System (rack version, from 2014) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be simply inserted into the rack as with the original and charged on the bike or removed for charging.Maximum range and riding enjoyment for your pedelecGive your e-bike a second life and overcome all previous range limits. This replacement battery is the ideal choice to drastically increase the range of your pedelec or to replace an ageing original battery. The enormous capacity of 20 ampere hours enables you to tackle daily stages and the most demanding routes with many climbs without having to worry about the charging status. Enjoy ultimate freedom on two wheels.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It constantly monitors each individual cell, protects against harmful influences and ensures an even charge through active balancing. This maximises not only safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Active or Performance Line drive and a rack battery. It can be simply replaced with the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the rack (e.g. PowerPack 300, 400, 500). Features  ModelBeltrona e-bike rack battery for Bosch Active/Performance ApplicationE-bike drive System compatibilityBosch Active & Performance Line (from 2014) TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)20 Energy (Wh)720 Dimensions (L x W x H in mm)approx. 370 x 120 x 85 Weight (kg)approx. 3.7  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Active/Performance Line system. Please note that the charging time is correspondingly longer due to the very high capacity than with a battery with lower capacity.How far can I get with this 20Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. However, compared to the original PowerPack 500 (approx. 13.4Ah), you will achieve a significantly higher range with this 20Ah battery of up to 50% more.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014. It is mechanically and electronically not compatible with the older Classic Line (mainly model years up to 2013).What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is about 30% to 60%. It is recommended to check the charge level every 2-3 months and recharge the battery briefly if necessary to avoid deep discharge.

The Beltrona Li-Ion replacement battery for Bosch Active/Performance Line is the ideal solution for e-bike owners who need a reliable and extremely powerful energy source. This high-quality lithium-ion battery was specially developed for Bosch Active and Performance Line (from 2014) and guarantees seamless integration into your pedelec. With its enormous capacity of 20Ah, it offers maximum service life, high energy density and ensures impressive ranges, whether you are commuting in the city or going on longer tours. With this replacement battery, your e-bike is always ready for use and delivers the power you need to enjoy your adventures without interruptions.Highlights at a glanceEnormous capacity: With 20 Ah (720 Wh) for extremely long tours and one of the largest available ranges.Precise replacement: 100% compatible with the Bosch Active/Performance system (frame battery version, from 2014) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be simply attached to the frame like the original and charged on the bike or removed for charging.Maximum range and riding pleasure for your pedelecGive your e-bike a second life and overcome all previous range limitations. This replacement battery is the ideal choice to drastically increase the range of your pedelec or to replace an ageing original battery. The enormous capacity of 20 ampere hours allows you to master day stages and the most demanding routes with many gradients without having to worry about the charge level. Enjoy ultimate freedom on two wheels.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion branded cells ensure reliable power delivery. The integrated battery management system (BMS) is the brain of the battery. It continuously monitors every single cell, protects against harmful influences and ensures uniform charging through active balancing. This not only maximises safety but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Active or Performance Line drive and a frame battery. It can be simply exchanged for the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the frame (e.g. PowerPack 300, 400, 500). Features  ModelBeltrona e-bike frame battery for Bosch Active/Performance ApplicationE-bike drive System compatibilityBosch Active & Performance Line (from 2014) TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)20 Energy (Wh)720 Dimensions (L x W x H in mm)approx. 350 x 90 x 90 Weight (kg)approx. 3.8  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Active/Performance Line system. Please note that the charging time is correspondingly longer than for a battery with a lower capacity due to the very high capacity.How far can I get with this 20Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. However, compared to the original PowerPack 500 (approx. 13.4Ah), you will achieve a significantly higher range of up to 50% more with this 20Ah battery.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014. It is mechanically and electronically not compatible with the older Classic Line (mostly model years up to 2013).What is the best way to store the battery during winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal state of charge for longer storage is around 30% to 60%. It is advisable to check the charge level every 2-3 months and, if necessary, recharge the battery briefly to avoid deep discharge.

This high-quality Beltrona lithium-ion replacement battery was specially developed for pedelecs with the widely used Bosch Active Line, Active Line Plus, Performance Line and Performance Line CX drive systems (from model year 2014) with frame mounting. With its high capacity of 15 Ah (540 Wh), it gives your e-bike a significantly extended range and ensures long-lasting riding enjoyment. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a customised housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 15 Ah (540 Wh) for extended tours and a longer range than the original PowerPack 400.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance system (frame battery version, from 2014) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be simply attached to the frame like the original and charged on the bike or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice for increasing the range of your pedelec or replacing an ageing original battery. The high capacity of 15 ampere hours allows you to tackle longer trips and more challenging routes with inclines without having to worry about the charge level. Enjoy the freedom of travelling further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It constantly monitors each individual cell, protects against harmful influences and ensures an even charge through active balancing. This not only maximises safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Active or Performance Line drive and a frame battery. It can be easily replaced with the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the frame (e.g. PowerPack 300, 400, 500). Features  ModelBeltrona E-bike frame battery for Bosch Active/Performance ApplicationE-bike drive System compatibilityBosch Active & Performance Line (from 2014) TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)15 Energy (Wh)540 Dimensions (L x W x H in mm)approx. 350 x 90 x 90 Weight (kg)approx. 3.1  FAQs about the e-bike replacement batteryCan I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Active/Performance Line system. Please note that the charging time may be slightly longer than for a battery with a lower capacity due to the higher capacity.How far can I get with this 15Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. Compared to the original PowerPack 400 (approx. 11Ah), however, you will achieve a significantly longer range of approx. 35% more with this 15Ah battery.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014. It is mechanically and electronically not compatible with the older Classic Line (mostly model years up to 2013).What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. We recommend checking the charge level every 2-3 months and recharging the battery briefly if necessary to avoid deep discharge.

This high-quality E-Bike Vision PowerPack is designed as a precisely fitting replacement or second battery for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and vertical Intube battery (Powertube). With a capacity of 14 Ah (approx. 500 Wh), this battery offers excellent range for extended tours. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a robust housing to ensure maximum performance, safety, and seamless integration into your bicycle frame.Highlights at a glanceHigh capacity: With 14 Ah (approx. 500 Wh) for long and demanding tours.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for vertical Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating, and short circuit.Splashproof and dustproof: Robust construction for reliable function in all weather conditions.Long-lasting energy, perfectly integratedGive your e-bike new endurance. This Intube battery is the ideal choice to replace an ageing original battery or to acquire a second battery for especially long tours. It integrates seamlessly into the down tube of your e-bike, maintaining the slim and integrated appearance. The high capacity ensures that even on demanding routes or with high support level you will not be left stranded halfway.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion branded cells ensure reliable power output. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and continuously protects the battery. It monitors each individual cell, protects against harmful influences, and through active balancing, ensures uniform charging. This maximises not only safety, but also the lifetime and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis E-Bike Vision PowerPack is designed as a direct replacement for vertically installed Bosch Powertube batteries (e.g. Powertube 400, 500). It can simply be exchanged for the existing battery and charged with your original Bosch charger. Features  ModelE-Bike Vision PowerPack Intube (Vertical) ApplicationE-Bike drive (In-Tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-Ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)14 Energy (Wh)504 Dimensions (L x W x H in mm)approx. 355 x 85 x 65 Weight (kg)approx. 3.0  FAQs about the E-Bike replacement batteryHow do I know whether I need the vertical or horizontal version?This depends on the design of your bicycle frame. With the vertical version, the battery is inserted into the down tube from above or below. With the horizontal version, it is removed or inserted from the side of the down tube. Please compare the installation direction with your current battery.Can I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can continue to use your existing charging station without any problem.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with Intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool place (10-15 °C), dry, and avoid frost. The ideal state of charge for longer storage is about 30% to 60%. It is recommended to check the charge level every 2-3 months and if necessary briefly recharge the battery to avoid deep discharge.

This high-quality E-Bike Vision PowerPack is designed as a custom-fit replacement or second battery for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and horizontal intube battery (Powertube). With a capacity of 14 Ah (approx. 500 Wh), this battery offers an excellent range for extended tours. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a robust housing to ensure maximum performance, safety, and seamless integration into your bike frame.Highlights at a glanceHigh capacity: With 14 Ah (approx. 500 Wh) for long and demanding tours.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for horizontal Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Splashproof and dustproof: Robust construction for reliable function in any weather.Long-lasting energy, perfectly integratedGive your e-bike new stamina. This intube battery is the ideal choice if you need to replace an ageing original battery or want a second battery for particularly long tours. It fits seamlessly into the down tube of your e-bike, preserving its slim and integrated appearance. The high capacity ensures you won't be stranded halfway even on demanding routes or at a high support level.Modern cell technology and intelligent managementInside this battery, exclusively high-quality and durable lithium-ion branded cells ensure reliable power output. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and constantly protects the battery. It monitors each individual cell, protects against harmful influences and ensures uniform charging by means of active balancing. This not only maximises safety but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis E-Bike Vision PowerPack is designed as a direct replacement for horizontally installed Bosch Powertube batteries (e.g. Powertube 400, 500). It can be easily swapped for the existing battery and charged with your original Bosch charger. Features  ModelE-Bike Vision Powerpack Intube (Horizontal) ApplicationE-Bike drive (In-Tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)14 Energy (Wh)504 Dimensions (L x W x H in mm)approx. 355 x 65 x 85 Weight (kg)approx. 3.0  FAQs about the e-bike replacement batteryHow do I know if I need the horizontal or vertical version?This depends on the construction of your bike frame. With the horizontal version, the battery is removed or inserted from the side of the down tube. With the vertical version, it is inserted into the down tube from above or below. Please compare the removal direction with your current battery.Can I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can simply continue to use your existing charging station.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is about 30% to 60%. It is recommended to check the charge level every 2-3 months and, if necessary, briefly recharge the battery to avoid deep discharge.