Yuasa Lead-acid battery with 12V and 1.2Ah - NP1.2-12 VdS

The Yuasa NP2.3-12 is a maintenance-free VRLA industrial battery with VdS approval. It impresses with its compact dimensions, reliable power delivery and a service life of up to 5 years. Ideal if you need a stable 12-volt supply in a compact space for safety and emergency power applications.Highlights at a glanceReliable capacity: 2.3 Ah at 20-hour discharge down to 10.5 V at 20 °C.Compact and lightweight: 178 x 34 x 64 mm at 0.95 kg.Flexible mounting: Operation in any position except permanently upside down.Low self-discharge: About 3 percent per month at 20 °C.Especially safe: Low pressure relief valves, UL recognised materials.Easy installation: FASTON plug-in connection 4.7 mm.Maximum performance for compact applicationsDespite its small size, the NP2.3-12 delivers high charging currents for short periods. Up to 69 A for 1 second and 23 A for 1 minute are possible. The measured internal resistance is 90 mΩ at 1 kHz. This makes the battery particularly suitable for fire and intruder alarm systems, emergency and safety lighting, controllers, measuring instruments as well as small UPS and buffer applications.Efficiency meets long service lifeThe EUROBAT classification as Standard Commercial stands for a typical service life of 3 to 5 years at 20 °C. The low self-discharge supports long service times. The housing is made as standard from ABS to UL94 HB, with an optionally available flame-retardant FR version to UL94 V0. Valve-regulated recombination and low-maintenance operation ensure high operational safety.Technology for flexible applicationsThe battery can be operated in almost any position except permanently upside down. The operating temperature range for charging and discharging is minus 20 °C to plus 60 °C. For float charging, 13.65 V ±1 percent is provided, with temperature compensation of minus 3 mV per cell and degree Celsius. For fast charging, 14.50 V ±3 percent applies, compensation minus 4 mV per cell and degree Celsius.  For float charging, no current limitation is required, for fast charging 0.575 A is recommended. Sufficient ventilation must be ensured, as hydrogen can be produced with VRLA batteries.Electrical connection is via FASTON 4.7 mm plug-in connectors. The compact design facilitates installation in narrow housings and racks.Features  ModelYuasa NP2.3-12 VdS Battery typeVRLA AGM (cycle-resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current23A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)1 ConnectionBlade terminal CertificationsIEC 60896-21+22, UL, VdS  FAQs about the Yuasa NP lead batteryFor which applications is the battery suitable?Preferred areas of application are VdS-compliant fire and intruder alarm systems, emergency and safety lighting, control and signalling systems, measuring instruments, small UPS and buffer applications.How is the battery installed?Mounting is possible in any position except permanently upside down. Electrical connection is via FASTON blade terminals 4.7 mm. Please ensure correct polarity and sufficient ventilation.What charging voltage is recommended?For float charging 13.65 V ±1 percent at 20 °C, temperature compensation minus 3 mV per cell per °C. For fast charging 14.50 V ±3 percent at 20 °C with compensation minus 4 mV per cell per °C.No current limitation required for float charging, for fast charging 0.575 A.Are there any special safety instructions?Each cell has a low pressure valve for controlled venting. Do not operate batteries in gas-tight housings. Dispose of at the end of service life according to local regulations.Ask ChatGPTIs the battery suitable for series and parallel connections?Basically yes, provided installation is carried out according to Yuasa guidelines. Observe identical cable lengths per strand, suitable fuses, correct polarity and sufficient ventilation. For multiple strands, follow the instructions for multi-strand connection. Which chargers are suitable?Chargers with constant voltage for VRLA-AGM, set to the voltages specified in the data sheet and taking temperature compensation into account. 

The Yuasa NP17-12I VDS is an industrial, valve-regulated lead-acid battery (VRLA) with 12 V nominal voltage and 17 Ah capacity (20h). Thanks to leak-proof AGM technology, high current carrying capacity and VdS certification, this maintenance-free battery is particularly suitable for safety-critical applications such as fire alarm systems, UPS systems or telecommunications.Highlights at a glanceHigh capacity: 17 Ah (20h) / 15.7 Ah (10h) at 12 V for continuous power supply.Certified: VdS approval for safety-relevant systems such as fire alarm systems.Highly resilient: Up to 500 A discharge current for 1 second.Maintenance-free: VRLA-AGM technology with > 99 % gas recombination.Robust design: Internal thread or bolt connection (M5) for secure installation.Durable: EUROBAT class “Standard Commercial” up to 5 years operating life.Powerful solution for critical systemsWith a capacity of 17 Ah (20h discharge to 1.75 V/cell) or 15.7 Ah (10h discharge to 1.8 V/cell), the NP17-12I supplies reliable power even during sudden loads up to 500 A for 1 second. Ideal for use in safety-critical areas where constant performance and operational safety are decisive.Robust technology with long service lifeThe maintenance-free AGM technology (Absorbent Glass Mat) ensures a gas-tight seal with > 99 % gas recombination. The battery does not require electrolyte refilling and features self-closing low-pressure vent valves for safe pressure regulation. Self-discharge is only approx. 3 % per month, ideal for long-term readiness. The housing is made from durable ABS plastic (UL94:HB), with a flame-retardant version to UL94:V0 available as an option. The M5 internal thread or bolt connections enable stable and secure assembly with a tightening torque of 2.45 Nm.Features  ModelYuasa NP17-12I VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)17 (at 20h rate) Maximum discharge current170A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)181 x 76 x 167 Weight (kg)6.6 ConnectionM5 thread CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa lead-acid battery with 12V and 17AhFor which applications is the NP17-12I suitable?The NP17‑12I is a maintenance-free 12 V / 17 Ah AGM VRLA battery with VdS approval, ideally suited for UPS systems, emergency lighting, alarm and security technology, telecommunications, medical devices and PV backup systems.How long does the battery last?The NP17-12I offers a service life of up to 5 years at 20 °C and is classified as “Standard Commercial” according to EUROBAT.How safe is it to use?The battery is maintenance-free, features self-closing vent valves for gas pressure regulation and a robust housing. Installation is possible in all positions except permanently upside-down.What type of connection is used?The battery is equipped with M5 internal thread or bolt connections, optimal for a stable and vibration-resistant connection.How is the NP17‑12I charged correctly?Float Charging voltage (20 °C): 13.65 V (≈ 2.275 V/cell), temperature compensation –3 mV/cell/°CBoost/cycle charge: 14.5 V (≈ 2.42 V/cell), compensation –4 mV/cell/°CMax. charging current in cycle mode: approx. 4.25 A (~0.25 C)What temperature ranges and storage conditions should be observed?Charging: −15 °C to +50 °CDischarging: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3 % per month at 20 °C

The Yuasa NP7-12 is a powerful, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 7 Ah. It impresses with its reliable performance, robust design and versatile application options, ideal for industrial applications, safety and emergency power systems.Highlights at a glanceReliable capacity: 7 Ah at 12 V for constant power supply.Compact format: 151 × 65 × 97.5 mm, ideal for limited installation space.Flexible installation: Can be installed in any position, except permanently upside down.Maintenance free: VRLA technology with low pressure drain valves.Durable: EUROBAT classification "Standard Commercial" for up to 5 years of use.High current carrying capacity: Up to 210 A discharge current for 1 second.Robust performance for demanding applicationsThe NP7-12 offers a 20-hour capacity of 7 Ah (up to 1.75 V/cell at 20°C) and a 10-hour capacity of 6.4 Ah (up to 1.8 V/cell). Thanks to its high current carrying capacity of up to 210 A for 1 second, the battery is particularly suitable for emergency power systems, UPS systems and safety-related applications.Maintenance-free operation and long service lifeThe NP7-12 is classified as "Standard Commercial" according to EUROBAT and offers a service life of up to 5 years at 20°C ambient temperature. The self-discharge is only about 3% per month, ensuring a high level of operational readiness even after extended storage. The housing is made of durable ABS plastic (UL94:HB) and is also available in a flame-retardant version (UL94:V0) upon request. The battery meets the ISO 9001 quality standard.Easy integration and reliable technologyThe battery is equipped with Faston connectors (4.75 mm) and can be easily integrated into almost any system. Installation is possible in all positions, except permanently upside down. Each of the six cells is fitted with a low-pressure relief valve, which reseals automatically after pressure equalisation for maintenance-free and safe operation. The recommended float charge voltage is 13.65 V (±1%) per unit, for cyclic operation 14.5 V (±3%). The maximum charging current is 1.75 A during cyclic operation; for float charging there is no limit.Features ModelYuasa NP7-12 Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current80A (for 5 seconds) Charge voltage (float charge)13.65V (±1%) Charge voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 65 x 94 Weight (kg)2.5 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa lead-acid battery with 12V and 7AhHow long does the NP7-12 last?The NP7-12 offers a service life of up to 5 years at 20°C ambient temperature and complies with the EUROBAT category "Standard Commercial".For which applications is the battery suitable?The battery is suitable for:UPS systemsFire detection and alarm systemsMedical devicesEmergency lightingTelecommunications and control systemsIs flexible installation possible?Yes, the battery can be operated in almost any position, just avoid a permanently upside down mounting position.What safety features are integrated?The battery features a robust ABS housing and low-pressure relief valves for safe gas pressure regulation. A flame-retardant housing is optionally available.How and with which parameters is the NP7‑12 charged correctly?Float charging voltage: 13.65 V unit voltage (2.275 V/cell) at 20°C, temperature compensation –3 mV/cell/°C.Cyclic (boost) charging voltage: 14.5 V unit (2.42 V/cell), compensated with –4 mV/cell/°C.Recommended charging current for cyclic operation: up to approx. 1.75 A (~0.25 C)What is the maximum discharge current and how good is the deep discharge resistance?Short-term peak current (1 sec): 210 A,1‑minute current: 48 AInternal impedance: about 23 mΩ at 1 kHz.The battery recovers excellently after deep discharge and is structurally robust in designWhat is the self-discharge during storage and what should be observed?At 20°C, the self-discharge is about 3% per month. The NP7‑12 can be stored for up to 12 months, provided it is recharged regularly. Storage should be between –20°C and +60°C, ideally not exceeding +30°C. 

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. Equipped with maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclical operation, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for long-lasting power supply.VdS-certified: Ideal for fire and burglar alarm systems.Maintenance-free: Leak-proof AGM technology with > 99 % gas recombination.High current carrying capacity: Up to 360 A discharge current for 1 second.Flexible mounting: Operation in all positions (except permanently overhead).Durable: EUROBAT class “Standard Commercial” with up to 5 years service life.Powerful performance for safety-critical applicationsThe NP12-12 delivers 12 Ah with a 20-hour discharge (to 1.75 V/cell) and 11.1 Ah with a 10-hour discharge (to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited for short-term power peaks.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), the NP12-12 is absolutely maintenance-free and leak-proof. The battery features self-closing low-pressure release valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ according to EN IEC 60896-21, the short-circuit current is 320 A. The low self-discharge of approx. 3 % per month allows long-term storage with high operational readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (standby charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs about the Yuasa NP12-12 lead-acid batteryFor which applications is the NP12-12 suitable?The battery is ideally suited for:VdS-compliant fire and burglar alarm systemsUninterruptible power supplies (UPS)Safety lightingTelecommunicationsControl and regulation technologyMedical devicesIs the battery maintenance-free?Yes, thanks to AGM technology the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all orientations, except for permanently upside-down installation.Which charging parameters (float vs. cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charge limitation: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarge: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3 % per month at 20 °C

The Yuasa NP3.2-12RP is a compact, maintenance-free VRLA industrial battery from the NP series. It combines high reliability with flexible performance in standby and cyclic operation. Ideal for safety technology, emergency and safety lighting, measurement and control technology as well as small UPS and buffer applications.Highlights at a glanceReliable capacity: 3.2 Ah with 20-hour discharge to 1.75 V per cell at 30 °C.Cycle and float operation: Suitable for float or cyclic use, very good recovery after deep discharge.Flexible mounting: Can be operated in any position, except permanently upside down.Low self-discharge: Approximately 3 per cent per month at 20 °C.Simple installation: 4.8 mm FASTON connectors.Maximum performance for compact applicationsThe NP3.2-12RP delivers stable voltage and short load peaks in a small space. The AGM glass fibre fleece safely binds the electrolyte and the valve-controlled recombination minimises gassing. This makes the battery suitable for fire alarm and burglar alarm systems, portable measuring devices, control systems, telecommunications and as a buffer source in small energy and solar systems.Efficiency meets long service lifeThe EUROBAT classification Standard Commercial stands for a typical service life of 3 to 5 years in float operation at 20 °C. For float applications, a continuous float charge voltage of 2.275 V per cell is recommended, with temperature compensation of minus 3 mV per cell and degree Celsius. The very low self-discharge supports long service life in storage and standby mode.Technology for flexible applicationsThe permissible temperature range enables versatile applications. Charging from minus 15 °C to plus 50 °C, discharging from minus 20 °C to plus 60 °C, storage from minus 20 °C to plus 50 °C. The robust ABS housing is impact-resistant and optionally available as a flame-retardant FR version. The battery must not be operated in gas-tight housings and requires adequate ventilation.Battery features  ModelYuasa NP3.2-12RP Battery typeVRLA AGM (cycle-proof, maintenance-free) Nominal voltage (V)12 Capacity (Ah)3.2 (at 20h rate) Maximum discharge current32A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cycle operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)134 x 67 x 65 Weight (kg)1.4 ConnectionFlat connector 4.8mm CertificationsIEC 60896-21+22, UL  H2: FAQs about the Yuasa NP 3.2-12RP batteryWhat is the expected service life of the NP 3.2-12RP?In floating operation at 20 °C, the typical service life in the EUROBAT Standard Commercial class is 3 to 5 years.For which applications is the battery suitable?For fire alarm and intruder alarm systems, security and emergency lighting, measurement and control technology, telecommunications, small UPS as well as buffer and solar applications.How is the battery installed?Installation is possible in any position, except permanently overhead. The electrical connection is made via FASTON 4.8 mm plug-in terminals. Please ensure correct polarity, tight fit and adequate ventilation.What charging voltage is recommended for standby operation?For floating operation 2.275 V per cell at 20 °C with temperature compensation of minus 3 mV per cell and degree Celsius. For cyclical use, please refer to the characteristic-based specification of the charger.Can the battery be operated in a closed housing?No, VRLA batteries release hydrogen gas and must not be operated in airtight enclosures. Ensure adequate ventilation. Is the NP3.2/12RP suitable for series or parallel connections?Basically yes, provided the installation is carried out in accordance with the manufacturer's instructions, such as identical cable routes per string, suitable fusing and ventilation. Information can be found in the Yuasa application and installation documents.  

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound.