Yuasa NP3.2-12RP with 12 V and 3.2 Ah

The Yuasa NP1.2-12 VdS is a compact, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 V and a capacity of 1.2 Ah. Thanks to its leak-proof AGM technology, excellent deep-discharge recovery and VdS certification, this maintenance-free battery is ideal for safety-critical applications such as fire alarm systems, emergency power systems or communication equipment.Highlights at a glanceCompact capacity: 1.2 Ah at 12 V for small to medium-sized loadsVdS approved: G 101094 for safety-critical applicationsHigh current-carrying capacity: Maximum discharge current 36 A for 1 minuteMaintenance-free: AGM technology with gas recombination and sealed casingLong-lasting: EUROBAT classification “Standard Commercial” – up to 5 years’ service lifeCompact power for critical systemsWith a capacity of 1.2 Ah (20-hour discharge to 1.75 V/cell), the NP1.2-12 lead-acid battery provides a reliable power supply for mission-critical applications. Thanks to its high peak current output, it is particularly suitable for devices that require higher power for short periods, such as in alarm or emergency scenarios.Maintenance-free technology with robust constructionAGM (Absorbent Glass Mat) technology completely binds the electrolyte within the separator, preventing any free electrolyte from escaping. The integrated oxygen recombination (> 99 %) prevents water loss and makes the battery virtually maintenance-free. Low-pressure safety valves ensure controlled gas release and close automatically. The housing is made of robust ABS plastic (UL94:HB); a flame-retardant version (UL94:V0) is available as an option. Thanks to its compact design, the battery is easy to integrate, even in space-constrained systems.Features  ModelYuasa NP1.2-12 VdS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)1.2 (at a 20-hour rate) Maximum discharge current15A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years ( Yuasa -design) Dimensions (L/W/H, mm)97 x 48 x 58 Weight (kg)0.55 ConnectionFaston 4.8mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa 12V, 1.2Ah lead-acid batteryWhat applications is the NP1.2-12 suitable for?The NP1.2-12 is ideal for fire alarm systems, emergency lighting, telecommunications, security and backup systems, medical devices and portable electronics.How long does the battery last?In float mode, the service life is up to 5 years at 20 °C. In cyclic operation, over 1,000 charge/discharge cycles are possible (depending on the depth of discharge).How safe is it to use?The battery is valve-regulated (VRLA), features a sealed system with gas recombination and can be operated in any position, except permanently upside down.What type of connection is used?Faston connectors (4.8 mm) enable a quick and secure connection.How should the NP1.2-12 be charged correctly?Float charging voltage (20 °C): 13.65 V (≈ 2.275 V/cell), temperature compensation −3 mV/cell/°CBoost/cycle charge: 14.5 V (≈ 2.42 V/cell), compensation −4 mV/cell/°CMax. charging current in cycle mode: approx. 0.3 AWhat temperature ranges and storage conditions must be observed?Charging: −15 °C to +50 °CDischarge: −20 °C to +60 °CStorage (fully charged): −20 °C to +50 °CSelf-discharge: approx. 3% per month at 20 °C

Yuasa e NP2.3-12 is a maintenance-free VRLA industrial battery with VdS approval. It offers impressive compact dimensions, reliable power output and a service life of up to 5 years. Ideal when you require a stable 12-volt supply in security and emergency power applications where space is limited.Highlights at a glanceReliable capacity: 2.3 Ah during a 20-hour discharge to 10.5 V at 20 °C.VdS approved: G 101139 for safety-related applicationsCompact and lightweight: 178 x 34 x 64 mm, weighing 0.95 kg.Flexible installation: Operation in any position except permanently upside down.Low self-discharge: Approximately 3 per cent per month at 20 °C.Particularly safe: Low-pressure relief valves, UL-approved materials.Easy installation: FASTON plug connection 4.7 mm.Maximum performance for compact applicationsDespite its compact size, the NP2.3-12 delivers high charging currents for short periods. Up to 69 A for 1 second and 23 A for 1 minute are possible. The measured internal resistance is 90 mΩ at 1 kHz. This makes the battery particularly suitable for fire and burglar alarm systems, emergency and safety lighting, control systems, measuring instruments, and small UPS and buffer applications.Efficiency meets long service lifeThe EUROBAT classification as Standard Commercial indicates a typical service life of 3 to 5 years at 20 °C. The low self-discharge rate supports long storage times. The housing is made of ABS to UL94 HB as standard; a flame-retardant FR version to UL94 V0 is available as an option. Valve-regulated recombination and low-maintenance operation ensure a high level of operational reliability.Technology for flexible applicationsThe battery can be operated in almost any position, except permanently upside down. The operating temperature range for charging and discharging is from minus 20 °C to plus 60 °C. For float charging, 13.65 V ±1 per cent is specified, with temperature compensation of minus 3 mV per cell per degree Celsius. For fast charging, the voltage is 14.50 V ±3 per cent, with a compensation of minus 4 mV per cell per degree Celsius.  No current limitation is required for float charging; for high-current charging, 0.575 A is recommended. Adequate ventilation must be ensured, as hydrogen may be produced in VRLA batteries.Electrical connection is via FASTON 4.7 mm plug-in terminals. The compact design facilitates installation in narrow enclosures and racks.Features  ModelYuasa NP2.3-12 VdS Battery typeVRLA AGM (cycle-resistant, maintenance-free) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20-hour rate) Maximum discharge current23A (for 5 seconds) Charging voltage (trickle charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeHigh cycle life Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)1 ConnectionFlat plug CertificationsIEC 60896-21+22, UL, VdS  FAQs on the Yuasa NP lead-acid batteryWhat applications is the battery suitable for?Preferred areas of application include VdS-compliant fire and burglar alarm systems, emergency and safety lighting, control and signalling systems, measuring instruments, small UPS units and buffer applications.How is the battery installed?Installation is possible in any position, except permanently upside down. Electrical connection is via 4.7 mm FASTON plug-in terminals. Please ensure correct polarity and adequate ventilation.What charging voltage is recommended?For float charging: 13.65 V ±1 per cent at 20 °C, temperature compensation minus 3 mV per cell per °C. For high-power charging: 14.50 V ±3 per cent at 20 °C with compensation of minus 4 mV per cell per °C.No current limitation is necessary for float charging; for bulk charging, 0.575 A.Are there any special safety instructions?Each cell has a low-pressure valve for controlled venting. Do not operate batteries in gas-tight enclosures. Dispose of at the end of their service life in accordance with local regulations.Ask ChatGPTIs the battery suitable for series and parallel connections?In principle, yes, provided the installation is carried out in accordance with the Yuasa guidelines. Ensure identical cable lengths per string, suitable fuses, the correct polarity sequence and adequate ventilation. For multiple strings, follow the instructions for multi-string connections. Which chargers are suitable?Constant-voltage chargers for VRLA-AGM batteries, which are set to the voltages specified in the data sheet and take temperature compensation into account. 

The Yuasa NP7-12 is a high-performance, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 7 Ah. It impresses with its reliable performance, robust construction and versatile applications, making it ideal for industrial applications, security and emergency power systems.Highlights at a glanceReliable capacity: 7 Ah at 12 V for a constant power supply.VdS approved: G 189099 for safety-critical applicationsCompact design: 151 × 65 × 97.5 mm, ideal for limited installation space.Flexible installation: Can be installed in any position, except permanently upside down.Maintenance-free: VRLA technology with low-pressure vent valves.Long-lasting: EUROBAT classification “Standard Commercial” for up to 5 years of service life.High current-carrying capacity: Up to 210 A discharge current for 1 second.Rugged performance for demanding applicationsThe NP7-12 delivers a 20-hour capacity of 7 Ah (up to 1.75 V/cell at 20 °C) and a 10-hour capacity of 6.4 Ah (up to 1.8 V/cell). Thanks to its high current-carrying capacity of up to 210 A for 1 second, the battery is particularly suitable for emergency power systems, UPS systems and safety-critical applications.Maintenance-free operation and long service lifeThe NP7-12 is classified as “Standard Commercial” according to EUROBAT and offers a service life of up to 5 years at an ambient temperature of 20 °C. Self-discharge is only approx. 3% per month, which ensures high operational readiness even during prolonged storage. The casing is made of durable ABS plastic (UL94:HB) and is available in a flame-retardant version (UL94:V0) upon request. The battery complies with the ISO 9001 quality standard.Easy integration and reliable technologyThe battery is fitted with Faston connectors (4.75 mm) and can be easily integrated into almost any system. It can be installed in any position, except permanently upside down. Each of the six cells is fitted with a low-pressure relief valve which, once pressure has been equalised, closes automatically to ensure maintenance-free and safe operation. The recommended charging voltage for float charging is 13.65 V (±1%) per block, and 14.5 V (±3%) for cyclic operation. The maximum charging current is 1.75 A in cyclic operation; there is no limit for float charging.Features ModelYuasa NP7-12 Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)7 (at a 20-hour rate) Maximum discharge current80A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 65 x 94 Weight (kg)2.5 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa 12V 7Ah lead-acid batteryWhat is the service life of the NP7-12?The NP7-12 offers a service life of up to 5 years at an ambient temperature of 20 °C and meets the EUROBAT ‘Standard Commercial’ category.What applications is the battery suitable for?The battery is suitable for:UPS systemsFire detection and alarm systemsMedical devicesEmergency lightingTelecommunications and control systemsIs flexible installation possible?Yes, the battery can be operated in almost any position; only a permanently upside-down mounting position should be avoided.What safety features are built in?The battery features a robust ABS housing and low-pressure relief valves for safe gas pressure regulation. A flame-retardant housing is available as an option.How and with what parameters should the NP7‑12 be charged correctly?Float charging voltage: 13.65 V block voltage (2.275 V/cell) at 20 °C, temperature compensation –3 mV/cell/°C.Cyclic (boost) charging voltage: 14.5 V block (2.42 V/cell), compensated by –4 mV/cell/°C.Recommended charging current for cyclic operation: up to approx. 1.75 A (~0.25 C)What is the maximum discharge current and how effective is the deep-discharge protection?Short-term peak current (1 sec.): 210 A,1-minute current: 48 AInternal impedance: approx. 23 mΩ at 1 kHz.The battery recovers excellently after deep discharge and has a robust structural designWhat is the rate of self-discharge during storage and what should be taken into account?At 20 °C, self-discharge is approx. 3% per month. The NP7‑12 can be stored for up to 12 months, provided it is recharged regularly. Storage should take place at –20 °C to +60 °C, ideally at a maximum of +30 °C. 

The Yuasa NP12-12 VDS is a high-quality, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 volts and a capacity of 12 Ah. Featuring maintenance-free AGM technology and VdS certification, this battery provides a reliable and long-lasting power supply for safety-critical and industrial applications. Whether in standby mode or in cyclic use, the NP12-12 meets the highest quality and safety standards.Highlights at a glanceHigh capacity: 12 Ah at 12 V for a long-lasting power supply.VdS approved: G 189170 for safety-related applicationsMaintenance-free: Leak-proof AGM technology with > 99% gas recombination.High current-carrying capacity: Up to 360 A discharge current for 1 second.Flexible installation: Operation in all positions (except permanently upside down).Long-lasting: EUROBAT class “Standard Commercial” with a service life of up to 5 years.High performance for safety-critical applicationsThe NP12-12 delivers 12 Ah during a 20-hour discharge (down to 1.75 V/cell) and 11.1 Ah during a 10-hour discharge (down to 1.8 V/cell). With a maximum discharge current of 360 A for 1 second and 75 A for 1 minute, this battery is also ideally suited to short-term power peaks.Robust technology for demanding environmentsThanks to VRLA (Valve Regulated Lead Acid) technology with an AGM (Absorbent Glass Mat) system, the NP12-12 is completely maintenance-free and leak-proof. The battery features self-closing low-pressure relief valves for safe pressure equalisation within the cells. The internal resistance is 44.39 mΩ in accordance with EN IEC 60896-21, and the short-circuit current is 320 A. The low self-discharge rate of approx. 3% per month allows for long-term storage whilst maintaining a high state of readiness. The robust ABS housing can also be supplied in a flame-retardant version (UL94:V0) on request.Features  ModelYuasa NP12-12 VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current120A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)151 x 98 x 94 Weight (kg)4.0 ConnectionFaston 6.3mm CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa NP12-12 lead-acid batteryWhat applications is the NP12-12 suitable for?The battery is ideal for:VdS-compliant fire and intruder alarm systemsUninterruptible power supplies (UPS)Emergency lightingTelecommunicationsControl and regulation technologyMedical technology devicesIs the battery maintenance-free?Yes, thanks to AGM technology, the battery is completely maintenance-free and leak-proof.What is the service life of the NP12-12?The service life is up to 5 years at 20 °C and corresponds to the EUROBAT category “Standard Commercial”.Can the battery be installed flexibly?Yes, the battery can be operated in all positions, with the exception of a permanently upside-down mounted position.Which charging parameters (float vs cycle) apply?Float charging voltage (20 °C): approx. 13.65 V (2.275 V/cell), compensation –3 mV/cell/°CBoost/cycle charge: approx. 14.5 V (2.42 V/cell), compensation –4 mV/cell/°CCyclic charging limit: max. 3 A (~0.25 C)What temperature ranges and storage conditions apply?Charging: −15 °C to +50 °CDischarging: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3% per month at 20 °C

The Yuasa NP17-12I VDS is an industrial, valve-regulated lead-acid (VRLA) battery with a nominal voltage of 12 V and a capacity of 17 Ah (20h). Thanks to leak-proof AGM technology, high current-carrying capacity and VdS certification, this maintenance-free battery is particularly suitable for safety-critical applications such as fire alarm systems, UPS systems or telecommunications.Highlights at a glanceHigh capacity: 17 Ah (20h) / 15.7 Ah (10h) at 12 V for continuous power supply.VdS approved: G 197022 for safety-critical applicationsHighly resilient: Up to 500 A discharge current for 1 second.Maintenance-free: VRLA-AGM technology with > 99% gas recombination.Robust design: Internal thread or bolt connection (M5) for secure mounting.Long-lasting: EUROBAT class “Standard Commercial” with a service life of up to 5 years.High-performance solution for critical systemsWith a capacity of 17 Ah (20-hour discharge to 1.75 V/cell) or 15.7 Ah (10-hour discharge to 1.8 V/cell), the NP17-12I delivers a reliable power supply, even during sudden load peaks of up to 500 A for 1 second. Ideal for use in safety-critical applications where consistent performance and operational reliability are essential.Robust technology with a long service lifeThe maintenance-free AGM (Absorbent Glass Mat) technology ensures a gas-tight seal with > 99% gas recombination. The battery requires no electrolyte top-up and features self-closing low-pressure vent valves for safe pressure regulation. Self-discharge is only approx. 3% per month, ideal for long-term standby. The housing is made of durable ABS plastic (UL94:HB), and a flame-retardant version in accordance with UL94:V0 is optionally available. The connections with M5 internal thread or bolts allow for stable and secure mounting with a tightening torque of 2.45 Nm.Features  ModelYuasa NP17-12I VDS Battery typeVRLA AGM (maintenance-free) Nominal voltage (V)12 Capacity (Ah)17 (at 20h rate) Maximum discharge current170A (for 5 seconds) Charging voltage (float charge)13.65V (±1%) Charging voltage (cyclic operation)14.7V (±3%) Operating temperature (°C)-15 ~ 50 Storage temperature (°C)-20 ~ 50 Service lifeUp to 5 years (according to Yuasa design) Dimensions (L/W/H, mm)181 x 76 x 167 Weight (kg)6.6 ConnectionM5 thread CertificationsIEC 60896-21+22, VdS, UL  FAQs on the Yuasa 12V 17Ah lead-acid batteryWhat applications is the NP17-12I suitable for?The NP17‑12I is a maintenance-free 12 V / 17 Ah AGM‑VRLA battery with VdS approval, which is ideal for UPS systems, emergency lighting, alarm and security technology, telecommunications, medical equipment and PV backup systems.How long does the battery last?The NP17-12I offers a service life of up to 5 years at 20 °C and is classified as ‘Standard Commercial’ according to EUROBAT.How safe is operation?The battery is maintenance-free, has self-closing vent valves for gas pressure regulation and a robust housing. Installation is possible in any position except permanently upside down.What type of connection is used?The battery is equipped with M5 internal threads or bolt connections, ideal for a stable and vibration-resistant connection.How should the NP17‑12I be charged correctly?Float charging voltage (20 °C): 13.65 V (≈ 2.275 V/cell), temperature compensation –3 mV/cell/°CBoost/cycle charge: 14.5 V (≈ 2.42 V/cell), compensation –4 mV/cell/°CMax. charging current in cycle mode: approx. 4.25 A (~0.25 C)What temperature ranges and storage conditions must be observed?Charging: −15 °C to +50 °CDischarging: −20 °C to +60 °CStorage (fully charged): −20 °C to +60 °CSelf-discharge: approx. 3 % per month at 20 °C

The XCELL XP45-12 is a robust lead-acid battery with a nominal voltage of 12 volts and a capacity of 45 Ah (20-hour rate). Thanks to maintenance-free AGM technology, M6 inlay terminals and VdS certification (G115059), this battery is ideal for safety-critical and industrial applications. It impresses with its high discharge capacity, long service life and reliable performance even under demanding conditions.Highlights at a glanceVdS approved: G 115059 for safety-related applicationsHigh capacity: 45 Ah at a 20-hour discharge rate, 27.9 Ah at a 1-hour loadHigh discharge currents: Up to 450 A possible for 5 secondsLong-lasting: Up to 12 years of float life at 25 °CMaintenance-free: AGM technology with leak-proof designReliable: Low self-discharge (< 3%/month)Reliable performance for demanding industrial applicationsThe XP45-12 is characterised by its robust construction and high current output, making it the ideal choice for a wide range of demanding applications. These include uninterruptible power supply (UPS) systems, emergency lighting, telecommunications equipment and medical technology, as well as other industrial applications. Thanks to its M6 connectors (T4/T9), a stable and reliable connection is guaranteed. Even during brief peak loads, the battery reliably delivers up to 450 A of current, underlining its high performance and reliability.Energy efficiency and extended lifespanThe batteries offer a float life of up to 12 years at 25 °C, making them ideal for long-term use in stationary systems. The recommended charging voltage is 13.50–13.80 V in standby mode and 14.50–14.90 V in cyclic operation. The maximum charging current is limited to 13.5 A. Thanks to the temperature-compensated charging characteristics, energy efficiency is maintained even under fluctuating environmental conditions.Technology for maximum operational reliabilityThe flame-retardant ABS housing meets UL94-HB/V0 standards and provides reliable cell protection. Certifications to UL, CE, ISO 9001 and VdS confirm the product’s high manufacturing quality and safety. Self-discharge is less than 3% per month, ensuring reliable operational readiness even during prolonged storage periods.Features  ModelXCELL XP45-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)45 (at a 20-hour rate) Maximum discharge current450A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)197 x 165 x 170 Weight (kg)approx. 14.0 ConnectionM6 screw terminal CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP45-12 lead-acid batteryWhat is the battery’s service life?Under optimal environmental conditions (25 °C), the XP45-12 has a service life of up to 12 years in float mode.Is the battery VdS-certified?Yes, the VdS approval with the number G115059 confirms its suitability for safety-critical applications such as fire and burglar alarm systems.What temperature range is the XP45-12 battery designed to withstand?The XP45-12 battery is designed for discharge at –15 °C to +50 °C and charging at –10 °C to +50 °C.What is the self-discharge rate?At 25 °C, self-discharge is less than 3% per month; recharging is recommended after 6 months at the latest.What charging parameters apply?For standby operation: 13.50 – 13.80 V.For cyclic operation: 14.50 – 14.90 V.Temperature compensation: –18 mV/°C (float), –30 mV/°C (cycle).Max. charging current: 13.5 A.What is the cycle life of the XP45-12 battery?The XP45-12 battery can withstand up to 400 charge cycles at a 50% discharge rate.