Solar cable black 100m 6mm

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar installations with high energy requirements. With a rated output of 50 kW, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, making it ideal for large PV projects, industrial applications and off-grid power supply systems.Highlights at a glanceHigh-performing: 50 kW rated power and 55 kW maximum output Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100% unbalanced output usable per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large-scale plantsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6%, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9% ensures optimum power output even in the event of partial shading or heterogeneous module arrays.Flexibility and scalabilityThis inverter can be used in systems with up to 10 units connected in parallel, making it particularly suitable for large-scale modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with high-performance storage systems. The six programmable charge/discharge time slots offer intelligent energy management for self-consumption and grid relief.Reliability and protectionWith IP65 protection and comprehensive safety features such as reverse polarity protection, residual current monitoring and surge protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. Intelligent cooling ensures quiet operation (< 65 dB) even at high power output.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial facilities with very high energy consumption Large-scale projects with multiple battery storage units and module arrays Installers looking to implement future-proof high-voltage systems Off-grid installations with a diesel generator connection Grid-connected storage solutions with intelligent load management  ModelDEYE SUN 50K-SG01 HP3-EU-BM4 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. charging current (A)50+50 Max. discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-ion batterySelf-configuration for BMS Input data for the PV string Max. DC input power (W)65000 Nominal PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 + 55 Number of MPPT4 Strings per MPPT2 + 2 + 2 + 2 AC output data AC rated power and UPS power (W)50000 Max. AC output power (W)55000 AC rated output current (A)75,8 / 72,5 Max. AC output current (A)83,4 / 79,8 Max. continuous AC current (A)200 Peak power (without mains connection)1.5 times the rated power, 10 S Generator input/Smart load / AC coupling current (A)75,8 / 200 / 75,8 Output power factor0.8 leading to 0.8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% (rated power) DC power supply<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Surge categoryDC Type II/AC Type III Certifications and standards Network approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C performance reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527B×894H×294T (excluding connectors and brackets) Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs on the Deye Sun 50K Hybrid InverterDo I need external NA protection for systems rated at 50 kW or above?No. The inverter has an integrated anti-islanding circuit and complies with all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage batteries are approved?Officially compatible models include the BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The correct setup number is entered directly in the menu ‘Battery → Lithium → Setup Number’ or set via DIP switches. According to the manufacturer, other storage solutions such as BOS-G are already pre-configured. It is recommended to check the model against the compatibility list, as changes to the protocols can occur from time to time.How many kWp can I connect without clipping?According to the datasheet, the maximum DC input power is 65,000 W. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit can minor clipping losses occur on a few high-load days, which remain below two per cent over the course of the year. However, it is recommended to stay below 65 kW. The starting voltage of the solar modules is the decisive factor here. Can I connect several 50 kW units in parallel?Yes. Up to ten inverters can be operated in parallel, both grid-connected and off-grid. One unit acts as the master, including the CT sensor connection, whilst the remaining units automatically follow as part of the array.Do I need special ventilation?Active air conditioning is not required. The inverter operates with intelligent air cooling and is designed for ambient temperatures up to 60 °C. The maximum noise level is 65 dB(A) under full load; in standby mode, the unit remains virtually silent. Good air circulation is essential, for example in a ventilated plant room or at a sheltered outdoor location. The fan inlets and outlets must remain unobstructed; otherwise, charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 50 kW output, an integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x wall mount bracketA reinforced metal mounting rail for securely fixing the heavy industrial equipment to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via the Deye Cloud or Solarman app.3 x current transformers (CT)External folding current transformers for measuring energy flows at the building connection, necessary for zero-point feed-in and optimising self-consumption at high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the professional installation of the solid wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The Deye BOS-G 60 PRO high-voltage storage set is a reliable and high-performance storage solution for commercial applications and demanding private households. With a total capacity of 61.44 kWh, modular expandability and intelligent battery management, it meets the highest standards of safety, efficiency and flexibility.Highlights at a glanceHigh capacity: 61.44 kWh gross storage capacity for large energy systemsUsable energy: 55.30 kWh at 90 per cent depth of dischargeFlexible scalability: Up to 16 battery racks can be operated in parallelIntelligent control: Integrated BMS protects against overcharging, deep discharge and overheatingEasy to use: Quick installation in 19-inch rack formatEfficient energy storage for modern projectsWith its high voltage of 614.4 V and a wide operating voltage range of 528 to 700.8 V, the BOS-G 60 PRO provides an excellent basis for integration into existing energy systems. The lithium iron phosphate technology used ensures high safety, low self-discharge and a long service life.Modular and customisableThe system architecture enables flexible scaling up to 16 parallel battery racks and the parallel AC operation of up to 10 Deye inverters. This allows the system to be tailored precisely to growing requirements while remaining expandable in the long term.Safe energy managementThe integrated BMS continuously monitors cell voltages, temperatures and state of charge. It actively protects against critical operating conditions and optimises the service life of the battery units through automatic cell balancing.Who is the Deye BOS-G 60 PRO suitable for?The high-voltage storage set is ideal for:Commercial premises with high energy consumption or emergency power requirementsLarge-scale photovoltaic systems with a focus on optimising self-consumptionPrivate households with above-average energy consumptionProject developers who require a modular, certified high-voltage system  ModelDEYBOS-G-PRO Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 Max. battery module number InSeries (optional)5-16 System nominal voltage (V)256-819.2 System operating voltage (V)220~934.4 System capacity (kWh)25.6-81.92 System usable capacity (kWh)23.04-73.73 Charging/discharging current (A) - recommendation50 Charging/discharging current (A) - rated value100 Charging/discharging current (A) - peak discharge (2 min,25°C)125 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 55 Display system indicator Yellow : Battery High VoltagePower On Red : Battery System Alarm Communication portCAN2.0, RS485 Humidity5% ~ 85%RH Altitude≤3000m IP protection rating of the enclosureIP20 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)530 * 602 * 2219 Weight (kg)290-837 Installation locationFloor mounting Recommended depth of discharge90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3 / CE / CE-EMC / IEC62040 / CEC / VDE  FAQs on the Deye BOS-G 60 PRO high-voltage storage setWhat storage capacity does the BOS‑G 60 PRO deliver and how much of it is usable?The set consists of 12 LiFePO₄ modules, each with a gross capacity of 5.12 kWh, resulting in a total storage capacity of 61.44 kWh. Thanks to the recommended 90% depth of discharge (DoD), around 55.3 kWh net usable energy is available, ideal for large private households or commercial applications.What protection and management functions does the BMS perform?The integrated battery management system (BMS) continuously monitors and protects against overvoltage and undervoltage, overcurrent, short circuit and temperature deviations. It also actively balances all cells and ensures optimal charging and discharging conditions.Which electrical parameters (voltage & current) are relevant?Operating voltage: between 528 V and 700.8 V, nominal voltage at 614.4 V DCMaximum continuous current: 100 AShort-term peak current: 125 A (approx. 2 minutes)Is the system modularly expandable?Yes, the modular concept allows several BOS‑G 60 PRO storage systems to be operated in parallel. Up to 16 tanks (racks) in series connection and up to 10 inverters in AC connection are possible in order to scale capacity and redundancy as required.In which temperature range can the storage system be operated?Discharging: from −20 °C to +55 °CCharging: from 0 °C to +55 °C. Scope of delivery Deye BOS-G60 PRO high-voltage storage set (61.44 kWh) with rack system: System compositionThis product is a set and consists of a rack cabinet and the 13 individual slide-in modules (1x BMS and 12x batteries).Component 1: Deye rack system / battery cabinetA cabinet for accommodating the BMS unit and the battery modules, often with castors and feet.Component 2: Deye control box / BMS slide-in moduleThe central control unit (BMS/BCCB), which is inserted into the rack cabinet as a module.Component 3 to 14: Twelve Deye BOS-G-PRO-Pack5.1 high-voltage battery slide-in modules (5.12 kWh each)Twelve pure high-voltage battery modules, which are also inserted into the rack cabinet.1 x set of battery connection cables (plus & minus)A pair of special high-voltage power cables for connecting the BMS module to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A long data cable for communication between the BMS module and the inverter.12 x connecting bridge / series connection cableShort, robust cables or fixed bridges for connecting the thirteen slide-in modules (BMS + 12 batteries) to each other in the rack.1 x earthing cableA protective conductor cable for the compliant earthing of the rack system.1 x mounting accessories (rack mounting)Includes screws and rails for fastening the modules within the rack, as well as material for anchoring the cabinet to the floor.1 x operating and installation instructionsA printed manual describing the assembly of the complete rack system.

The SOLR6100 solar cable (100 metres, 6mm²) in red is the professional solution for photovoltaic installations where maximum efficiency and minimum resistance are paramount. With a length of 100 metres per roll and a reinforced cross-section of 6mm², this cable is ideal for large rooftop installations, ground-mounted projects, or systems with high current ratings. The red marking allows standard-compliant identification of the positive pole (+) and ensures clear cabling.Certified according to the international standard IEC 62930, this cable provides the highest safety for modern PV systems with voltages up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section greatly reduces electrical resistance and ensures higher yield compared to standard cables.Certified safety: Conforms to IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.High coverage: 100 metres in one piece allow for individual cuts for custom string connections without unnecessary junctions.Extremely durable: High quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a service life of over 25 years.Corrosion-protected conductor: Fine stranded, tinned copper provides consistently optimal conductivity and protection against oxidation in humid environments.Wide temperature range: Safe operation under extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLR6100 is the first choice for demanding PV projects:Large rooftop systems & PV parksEfficient string cabling and connecting distant module fields to the central inverter.High-performance balcony systemsIdeal for systems with modern modules (500Wp+), to transport high currents without loss.Battery storage & off-grid systemsPerfect for 24V or 48V systems where minimal voltage drops are crucial for charging efficiency.Installation & safety instructionsProfessional connectionUse only MC4 connectors explicitly approved for 6mm² cable with this cross-section and a high-quality crimping tool.Mechanical protectionWhen routing on the roof or through walls, use corrugated conduits or cable ducting to protect the insulation from mechanical abrasion and rodent damage.Parallel cable routingRun positive (red) and negative (black) cables as parallel and close as possible together, to minimise electromagnetic interference (induction loops). Features Model / SKU**SOLR6100** Conductor cross-section**6.0 mm²** Form of supply**100 metre roll** ColourRed (positive pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV & ozone resistant  FAQs on the red solar cable 100m 6mm²Why should I choose 6mm² instead of 4mm²?For higher yield and future-proofing. Especially with cable lengths over 15–20 metres or when using modules with high current (Isc over 13A), the voltage drop with 6mm² is noticeably lower. This means that more energy reaches the inverter and the cable remains cooler under high load.Can the cable be laid directly in the ground?Only in a protective conduit. Although the insulation is very robust, the cable is not designed for direct burial without protection. In suitable cable protection conduit, however, laying in the ground is no problem.Is the cable resistant to chemicals?Yes. The XLPO insulation is resistant to acids, alkalis, and ammonia. This makes it especially suitable for installations in agriculture (barns) or in areas affected by industrial pollution.